imx6: drop 4.1 support

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48300

1 files changed, 0 insertions, 129 deletions

diff --git a/target/linux/imx6/patches-4.1/202-net-igb-add-i210-i211-support-for-phy-read-write.patch b/target/linux/imx6/patches-4.1/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
deleted file mode 100644
index fb4b722..0000000
--- a/target/linux/imx6/patches-4.1/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-Author: Tim Harvey <tharvey@gateworks.com>
-Date:   Thu May 15 00:12:26 2014 -0700
-
-    net: igb: add i210/i211 support for phy read/write
-    
-    The i210/i211 uses the MDICNFG register for the phy address instead of the
-    MDIC register.
-    
-    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/net/ethernet/intel/igb/e1000_phy.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
-@@ -135,7 +135,7 @@ out:
- s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
- {
- 	struct e1000_phy_info *phy = &hw->phy;
--	u32 i, mdic = 0;
-+	u32 i, mdicnfg, mdic = 0;
- 	s32 ret_val = 0;
- 
- 	if (offset > MAX_PHY_REG_ADDRESS) {
-@@ -148,11 +148,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
- 	 * Control register.  The MAC will take care of interfacing with the
- 	 * PHY to retrieve the desired data.
- 	 */
--	mdic = ((offset << E1000_MDIC_REG_SHIFT) |
--		(phy->addr << E1000_MDIC_PHY_SHIFT) |
--		(E1000_MDIC_OP_READ));
-+	switch (hw->mac.type) {
-+	case e1000_i210:
-+	case e1000_i211:
-+		mdicnfg = rd32(E1000_MDICNFG);
-+		mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+		mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+		wr32(E1000_MDICNFG, mdicnfg);
-+		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-+			(E1000_MDIC_OP_READ));
-+		break;
-+	default:
-+		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-+			(phy->addr << E1000_MDIC_PHY_SHIFT) |
-+			(E1000_MDIC_OP_READ));
-+		break;
-+	}
- 
- 	wr32(E1000_MDIC, mdic);
-+	wrfl();
- 
- 	/* Poll the ready bit to see if the MDI read completed
- 	 * Increasing the time out as testing showed failures with
-@@ -177,6 +191,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
- 	*data = (u16) mdic;
- 
- out:
-+	switch (hw->mac.type) {
-+		/* restore MDICNFG to have phy's addr */
-+		case e1000_i210:
-+		case e1000_i211:
-+			mdicnfg = rd32(E1000_MDICNFG);
-+			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+			mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
-+			wr32(E1000_MDICNFG, mdicnfg);
-+			break;
-+		default:
-+			break;
-+	}
- 	return ret_val;
- }
- 
-@@ -191,7 +217,7 @@ out:
- s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
- {
- 	struct e1000_phy_info *phy = &hw->phy;
--	u32 i, mdic = 0;
-+	u32 i, mdicnfg, mdic = 0;
- 	s32 ret_val = 0;
- 
- 	if (offset > MAX_PHY_REG_ADDRESS) {
-@@ -204,12 +230,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- 	 * Control register.  The MAC will take care of interfacing with the
- 	 * PHY to retrieve the desired data.
- 	 */
--	mdic = (((u32)data) |
--		(offset << E1000_MDIC_REG_SHIFT) |
--		(phy->addr << E1000_MDIC_PHY_SHIFT) |
--		(E1000_MDIC_OP_WRITE));
-+	switch (hw->mac.type) {
-+		case e1000_i210:
-+		case e1000_i211:
-+			mdicnfg = rd32(E1000_MDICNFG);
-+			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+			mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+			wr32(E1000_MDICNFG, mdicnfg);
-+			mdic = (((u32)data) |
-+				(offset << E1000_MDIC_REG_SHIFT) |
-+				(E1000_MDIC_OP_WRITE));
-+			break;
-+		default:
-+			mdic = (((u32)data) |
-+				(offset << E1000_MDIC_REG_SHIFT) |
-+				(phy->addr << E1000_MDIC_PHY_SHIFT) |
-+				(E1000_MDIC_OP_WRITE));
-+			break;
-+	}
- 
- 	wr32(E1000_MDIC, mdic);
-+	wrfl();
- 
- 	/* Poll the ready bit to see if the MDI read completed
- 	 * Increasing the time out as testing showed failures with
-@@ -233,6 +274,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- 	}
- 
- out:
-+	switch (hw->mac.type) {
-+		/* restore MDICNFG to have phy's addr */
-+		case e1000_i210:
-+		case e1000_i211:
-+			mdicnfg = rd32(E1000_MDICNFG);
-+			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+			mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
-+			wr32(E1000_MDICNFG, mdicnfg);
-+			break;
-+		default:
-+			break;
-+	}
- 	return ret_val;
- }
-