imx6: drop 3.14

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45371

27 files changed, 0 insertions, 6247 deletions

diff --git a/target/linux/imx6/config-3.14 b/target/linux/imx6/config-3.14
deleted file mode 100644
index e9cf11d..0000000
--- a/target/linux/imx6/config-3.14
+++ /dev/null
@@ -1,362 +0,0 @@
-CONFIG_AHCI_IMX=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_ARCH_HAS_OPP=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_IMX6Q_CPUFREQ=y
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-# CONFIG_ATA_SFF is not set
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_XZ=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_IMX_UART_PORT=1
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_UART_PL01X is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC_CORE is not set
-# CONFIG_DW_DMAC_PCI is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FEC=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_GENERIC_CPUFREQ_CPU0 is not set
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MXC=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IMX_ANATOP=y
-CONFIG_HAVE_IMX_GPC=y
-CONFIG_HAVE_IMX_MMDC=y
-CONFIG_HAVE_IMX_SRC=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_IMX2_WDT=y
-CONFIG_IMX_DMA=y
-CONFIG_IMX_SDMA=y
-# CONFIG_IMX_WEIM is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD=y
-CONFIG_JBD2=y
-CONFIG_KTIME_SCALAR=y
-# CONFIG_LEDS_REGULATOR is not set
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_EUKREA_CPUIMX51SD is not set
-# CONFIG_MACH_IMX51_DT is not set
-# CONFIG_MACH_MX51_BABBAGE is not set
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_MXC is not set
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_GPMI_NAND=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_MX3_IPU is not set
-# CONFIG_MXC_DEBUG_BOARD is not set
-CONFIG_MXS_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_IMX6=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX=y
-CONFIG_PINCTRL_IMX6Q=y
-CONFIG_PINCTRL_IMX6SL=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM_OPP=y
-CONFIG_PPS=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_ANATOP=y
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_PFUZE100=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_RFKILL_REGULATOR is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_IMXDI is not set
-# CONFIG_RTC_DRV_MXC is not set
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-# CONFIG_SOC_IMX50 is not set
-# CONFIG_SOC_IMX53 is not set
-CONFIG_SOC_IMX6Q=y
-CONFIG_SOC_IMX6SL=y
-# CONFIG_SOC_VF610 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_MASTER=y
-CONFIG_STMP_DEVICE=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWIOTLB=y
-# CONFIG_SWP_EMULATE is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_XZ=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-# CONFIG_USB_MXS_PHY is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_3G is not set
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/imx6/files-3.14/arch/arm/boot/dts/imx6dl-gw552x.dts b/target/linux/imx6/files-3.14/arch/arm/boot/dts/imx6dl-gw552x.dts
deleted file mode 100644
index 3af6f1b..0000000
--- a/target/linux/imx6/files-3.14/arch/arm/boot/dts/imx6dl-gw552x.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw552x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW552X";
-	compatible = "gw,imx6dl-gw552x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/target/linux/imx6/files-3.14/arch/arm/boot/dts/imx6q-gw552x.dts b/target/linux/imx6/files-3.14/arch/arm/boot/dts/imx6q-gw552x.dts
deleted file mode 100644
index ac9d5a7..0000000
--- a/target/linux/imx6/files-3.14/arch/arm/boot/dts/imx6q-gw552x.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw552x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW552X";
-	compatible = "gw,imx6q-gw552x", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/target/linux/imx6/files-3.14/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/target/linux/imx6/files-3.14/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
deleted file mode 100644
index dc9ca33..0000000
--- a/target/linux/imx6/files-3.14/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		usb0 = &usbh1;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_5p0v: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "5P0V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	hwmon: gsc@29 {
-		compatible = "gw,gsp";
-		reg = <0x29>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pciswitch: pex8609@3f {
-		compatible = "plx,pex8609";
-		reg = <0x3f>;
-	};
-
-	pmic: ltc3676@3c {
-		compatible = "ltc,ltc3676";
-		reg = <0x3c>;
-
-		regulators {
-			sw1_reg: ltc3676__sw1 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: ltc3676__sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: ltc3676__sw3 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: ltc3676__sw4 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ltc3676__ldo2 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ltc3676__ldo4 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-gw52xx {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE_RST# */
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09     0x80000000 /* USBHUB_RST# */
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* PCIESKT_WDIS# */
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x80000000 /* user2 led */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
-			 >;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&gpio1 29 0>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
diff --git a/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.c b/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.c
deleted file mode 100644
index 66b5536..0000000
--- a/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.c
+++ /dev/null
@@ -1,949 +0,0 @@
-/*
- * drivers/net/phy/gw16083.c
- *
- * Driver for GW16083 Ventana Ethernet Expansion Mezzanine
- *
- * Author: Tim Harvey
- *
- * Copyright (c) 2014 Tim Harvey <tharvey@gateworks.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/*
- * The GW16083 interfaces with a Ventana baseboard via the PCIe bus, an i2c
- * bus (i2c2), and a couple of GPIO's. On the PCIe bus is an i210 GigE with
- * its MAC connected to Port4 of a Marvell MV88E6176 7-port GigE switch via
- * MDIO and RGMII. Ports 0-3 are standard copper RJ45 but Ports 5 and 6
- * connect to Marvell MV88E1111 dual-mode Copper/Fiber PHY's over SGMII and
- * MDIO. The PHY's have both an RG45 for copper and an SFP module.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/phy.h>
-#include <linux/marvell_phy.h>
-#include <linux/of_platform.h>
-
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-
-#include "gw16083.h"
-
-#undef FAIL_ON_CHECKSUM_ERR	/* fail to configure SFP if checksum bad */
-#define PORT_POWER_CONTROL	/* ports can be enabled/disabled via sysfs */
-#define PORT_MODE_CONTROL	/* ports 5/6 can have SFP/RJ45 mode forced */
-
-MODULE_DESCRIPTION("GW16083 driver");
-MODULE_AUTHOR("Tim Harvey");
-MODULE_LICENSE("GPL");
-
-struct mv88e1111_port_state {
-	int port;
-	bool present;
-	bool serdes;
-	bool sfp_signal;
-	bool sfp_present;
-	bool sfp_compat;
-	bool sfp_enabled;
-	char sfp_id[64];
-};
-
-struct mv88e1111_priv {
-	struct phy_device		*phydev;
-	struct i2c_client		*client;
-	struct mv88e1111_port_state	port5;
-	struct mv88e1111_port_state	port6;
-	struct kobject			*sysfs_kobj;
-};
-
-enum {
-	mode_copper = 0,
-	mode_serdes = 1,
-};
-
-static struct i2c_client *gw16083_client = NULL;
-
-static int gw16083_read_port_sfp(struct i2c_client *client,
-				 struct mv88e1111_port_state *state);
-
-/* read switch port register from port0-6 */
-u16 read_switch_port(struct phy_device *pdev, int port, u8 regaddr)
-{
-	return pdev->bus->read(pdev->bus, MV_BASE + port, regaddr);
-}
-
-/* write switch port register to port0-6 */
-int write_switch_port(struct phy_device *pdev, int port, u8 regaddr, u16 val)
-{
-	return pdev->bus->write(pdev->bus, MV_BASE + port, regaddr, val);
-}
-
-/*
- * read_switch_port_phy - write a register for a specific port on 88E6176
- * The 88E6176 PHY registers must be accessed thorugh the Global2 address
- * using the SMI_PHY_COMMAND_REG and SMI_PHY_DATA_REG.
- */
-int read_switch_port_phy(struct phy_device *pdev, int port, u8 regaddr)
-{
-	u16 reg;
-	int i;
-
-	dev_dbg(&pdev->dev, "read_phy: port%d reg=0x%02x\n", port, regaddr);
-	reg = SMIBUSY | SMIMODE22 | SMIOP_READ;
-	reg |= port << DEVADDR;
-	reg |= regaddr << REGADDR;
-	pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_COMMAND, reg);
-	for (i = 0; i < 10; i++) {
-		reg = pdev->bus->read(pdev->bus, MV_GLOBAL2,
-				      MV_SMI_PHY_COMMAND);
-		if (!(reg & (1<<15)))
-			break;
-		mdelay(1);
-	}
-	/* timeout */
-	if (i == 10)
-		return 0xffff;
-	reg = pdev->bus->read(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_DATA);
-	return reg;
-}
-
-/*
- * write_switch_port_phy - write a register for a specific port on 88E6176
- * The 88E6176 PHY registers must be accessed thorugh the Global2 address
- * using the SMI_PHY_COMMAND_REG and SMI_PHY_DATA_REG.
- */
-int write_switch_port_phy(struct phy_device *pdev, int port, u8 addr, u16 reg)
-{
-	int i;
-
-	dev_dbg(&pdev->dev, "write_phy: port%d reg=0x%02x val=0x%04x\n", port,
-		addr, reg);
-	pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_DATA, reg);
-	reg = SMIBUSY | SMIMODE22 | SMIOP_WRITE;
-	reg |= port << DEVADDR;
-	reg |= addr << REGADDR;
-	pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_COMMAND, reg);
-	for (i = 0; i < 10; i++) {
-		reg = pdev->bus->read(pdev->bus, MV_GLOBAL2,
-				      MV_SMI_PHY_COMMAND);
-		if (!(reg & (1<<15)))
-			break;
-		mdelay(1);
-	}
-	/* timeout */
-	if (i == 10)
-		return -ETIMEDOUT;
-
-	return 0;
-}
-
-/* read a scratch register from switch */
-inline u8 read_switch_scratch(struct phy_device *pdev, u8 reg)
-{
-	pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC, (reg << 8));
-	return pdev->bus->read(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC) & 0xff;
-}
-
-/* write a scratch register to switch */
-inline void write_switch_scratch(struct phy_device *pdev, u8 reg, u8 val)
-{
-	pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC,
-			 (1 << 15) | (reg << 8) | val);
-}
-
-/* enable or disable an SFP's TXEN signal */
-static int enable_sfp_txen(struct phy_device *pdev, int port, bool enable)
-{
-	u8 gpio;
-	int bit;
-
-	if (port != 5 && port != 6)
-		return -EINVAL;
-
-	/* GPIO[2:1] output low to enable TXEN */
-	bit = (port == 5) ? 1 : 2;
-	gpio = read_switch_scratch(pdev, MV_GPIO_DATA);
-	if (enable)
-		gpio |= (1 << bit);
-	else
-		gpio &= (1 << bit);
-	write_switch_scratch(pdev, MV_GPIO_DATA, gpio);
-	dev_info(&pdev->dev, "Port%d: SFP TX %s\n", port, enable ?
-		 "enabled" : "disabled");
-	return 0;
-}
-
-/* configure mv88e1111 port for copper or serdes
- *  For Copper we set auto link/duplex/speed detection
- *  For SerDes/Fiber we force 1000mbps link up and auto-neg duplex
- */
-static int config_mv88e1111_port_sfp(struct phy_device *pdev, int port,
-				     bool sfp)
-{
-	u16 reg;
-
-	if (port != 5 && port != 6)
-		return -EINVAL;
-
-	dev_dbg(&pdev->dev, "%s: Port%d %s\n", __func__, port,
-		sfp ? "SFP" : "copper");
-	if (sfp) {
-		enable_sfp_txen(pdev, port, 1);
-
-		/* configure MV88E6176 Physical Control Port Register */
-		dev_info(&pdev->dev,
-			 "Port%d: SFP: force 1000mbps link up "
-			 "(auto-negotiate duplex)\n",
-			 port);
-		reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
-		reg &= ~0x3f; /* clear 5-0 */
-		reg |= (1 << 4) | (1 << 5); /* force link up */
-		reg |= 2; /* force 1000mbps */
-		write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, reg);
-		reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
-	}
-
-	/* copper */
-	else {
-		enable_sfp_txen(pdev, port, 0);
-
-		/* configure MV88E6176 Physical Control Port Register */
-		dev_info(&pdev->dev,
-			 "Port%d: Copper: set auto-neg link/duplex/speed\n",
-			 port);
-		reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
-		reg &= ~0x3f; /* clear 5-0 */
-		reg |= 3; /* speed not forced */
-		write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, reg);
-		reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
-	}
-	dev_dbg(&pdev->dev, "%s: Port%d %s PORT_PHYS_CONTROL=0x%04x\n",
-		__func__, port, sfp ? "SFP" : "copper",
-		read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL));
-
-	return 0;
-}
-
-#if defined(PORT_POWER_CONTROL)
-static int enable_switch_port(struct phy_device *pdev, int port, bool enable)
-{
-	struct mv88e1111_priv *priv = dev_get_drvdata(&pdev->dev);
-	u16 reg;
-
-	/* power up port */
-	dev_info(&priv->client->dev, "Port%d: %s\n", port,
-		 enable ? "normal operation" : "power down");
-	reg = read_switch_port_phy(pdev, port, MV_PHY_CONTROL);
-	if (enable)
-		reg &= ~(1 << 11);	/* Normal Operation */
-	else
-		reg |= (1 << 11);	/* power down */
-	write_switch_port_phy(pdev, port, MV_PHY_CONTROL, reg);
-
-	reg = read_switch_port_phy(pdev, port, MV_PHY_CONTROL1);
-	if (enable)
-		reg &= ~(1 << 2);	/* Normal Operation */
-	else
-		reg |= (1 << 2);	/* power down */
-	write_switch_port_phy(pdev, port, MV_PHY_CONTROL1, reg);
-
-	return 0;
-}
-#endif
-
-/*
- * Sysfs API
- */
-
-struct mv88e1111_port_state *get_port_state(struct mv88e1111_priv *priv,
-					    int port)
-{
-	if (port == 5)
-		return &priv->port5;
-	if (port == 6)
-		return &priv->port6;
-	return NULL;
-}
-
-/*
- * get MV88E6176 port number for a specific GW16083 port name
- *  The GW16083 ports as shown on the silkscreen are not mapped according to
- *  the MV88E6176 ports numbers.
- */
-static int gw16083_get_port(const char* name)
-{
-	int i;
-	int map[] = { 3, 2, 1, 0, 5, 6 };
-
-	if (strncasecmp(name, "ETHERNET", 8) != 0 || strlen(name) != 9)
-		return -1;
-	i = name[8] - '0';
-	if (i < 1 || i > 6)
-		return -1;
-	return map[i-1];
-}
-
-static ssize_t port_show(struct device *dev, struct device_attribute *attr,
-			 char *buf)
-{
-	struct mv88e1111_priv *priv = dev_get_drvdata(dev);
-	int port = -1;
-	u16 reg;
-
-	if (sscanf(attr->attr.name, "port%d", &port) != 1)
-		return 0;
-	if (port < 0 || port > 6)
-		return 0;
-	reg = read_switch_port_phy(priv->phydev, port, MV_PHY_CONTROL);
-	return sprintf(buf, "%s\n", (reg & (1 << 11)) ? "disabled" : "enabled");
-}
-
-#if defined(PORT_POWER_CONTROL)
-static ssize_t port_store(struct device *dev, struct device_attribute *attr,
-			  const char *buf, size_t count)
-{
-	struct mv88e1111_priv *priv = dev_get_drvdata(dev);
-	int port = -1;
-	int val;
-
-	port = gw16083_get_port(attr->attr.name);
-	if (port < 0)
-		return 0;
-	if (sscanf(buf, "%d", &val) != 1)
-		return 0;
-	enable_switch_port(priv->phydev, port, val ? 1 : 0);
-	return count;
-}
-
-static DEVICE_ATTR(ethernet1, S_IWUSR | S_IRUGO, port_show, port_store);
-static DEVICE_ATTR(ethernet2, S_IWUSR | S_IRUGO, port_show, port_store);
-static DEVICE_ATTR(ethernet3, S_IWUSR | S_IRUGO, port_show, port_store);
-static DEVICE_ATTR(ethernet4, S_IWUSR | S_IRUGO, port_show, port_store);
-static DEVICE_ATTR(ethernet5, S_IWUSR | S_IRUGO, port_show, port_store);
-static DEVICE_ATTR(ethernet6, S_IWUSR | S_IRUGO, port_show, port_store);
-#else
-static DEVICE_ATTR(ethernet1, S_IRUGO, port_show, NULL);
-static DEVICE_ATTR(ethernet2, S_IRUGO, port_show, NULL);
-static DEVICE_ATTR(ethernet3, S_IRUGO, port_show, NULL);
-static DEVICE_ATTR(ethernet4, S_IRUGO, port_show, NULL);
-static DEVICE_ATTR(ethernet5, S_IRUGO, port_show, NULL);
-static DEVICE_ATTR(ethernet6, S_IRUGO, port_show, NULL);
-#endif
-
-static ssize_t portsfp_show(struct device *dev, struct device_attribute *attr,
-			     char *buf)
-{
-	struct mv88e1111_priv *priv = dev_get_drvdata(dev);
-	struct mv88e1111_port_state *state;
-
-	state = get_port_state(priv, gw16083_get_port(attr->attr.name));
-	if (!state)
-		return 0;
-
-	if (!state->sfp_present)
-		return 0;
-
-	return sprintf(buf, "%s\n", state->sfp_id);
-}
-
-static ssize_t portmode_show(struct device *dev, struct device_attribute *attr,
-			     char *buf)
-{
-	struct mv88e1111_priv *priv = dev_get_drvdata(dev);
-	struct mv88e1111_port_state *state;
-
-	state = get_port_state(priv, gw16083_get_port(attr->attr.name));
-	if (!state)
-		return 0;
-
-	return sprintf(buf, "%s\n", state->serdes ? "SFP" : "RJ45");
-}
-static DEVICE_ATTR(ethernet5_sfp, S_IRUGO, portsfp_show, NULL);
-static DEVICE_ATTR(ethernet6_sfp, S_IRUGO, portsfp_show, NULL);
-
-#ifdef PORT_MODE_CONTROL
-static ssize_t portmode_store(struct device *dev, struct device_attribute *attr,
-			      const char *buf, size_t count)
-{
-	struct mv88e1111_priv *priv = dev_get_drvdata(dev);
-	struct mv88e1111_port_state *state;
-	u16 reg;
-	int port;
-
-	port = gw16083_get_port(attr->attr.name);
-	state = get_port_state(priv, port);
-	if (!state)
-		return 0;
-
-	reg = read_switch_port_phy(priv->phydev, port, MII_M1111_PHY_EXT_SR);
-	if (strcasecmp(buf, "auto") == 0) {
-		reg &= ~(1<<15); /* enable auto-selection */
-		dev_info(&priv->client->dev, "Port%d: enable auto-selection\n",
-			 port);
-	} else if (strcasecmp(buf, "RJ45") == 0) {
-		reg |= (1<<15); /* disable auto-selection */
-		reg |= 0xb; /* RGMII to Copper */
-		config_mv88e1111_port_sfp(priv->phydev, port, 0);
-		dev_info(&priv->client->dev, "Port%d: select RJ45\n", port);
-	} else if (strcasecmp(buf, "SFP") == 0) {
-		reg |= (1<<15); /* disable auto-selection */
-		reg |= 0x3; /* RGMII to Fiber */
-		config_mv88e1111_port_sfp(priv->phydev, port, 1);
-		dev_info(&priv->client->dev, "Port%d: select SFP\n", port);
-	}
-	write_switch_port_phy(priv->phydev, port, MII_M1111_PHY_EXT_SR, reg);
-
-	return count;
-}
-
-static DEVICE_ATTR(ethernet5_mode, S_IWUSR | S_IRUGO, portmode_show,
-		   portmode_store);
-static DEVICE_ATTR(ethernet6_mode, S_IWUSR | S_IRUGO, portmode_show,
-		   portmode_store);
-#else
-static DEVICE_ATTR(ethernet5_mode, S_IRUGO, portmode_show, NULL);
-static DEVICE_ATTR(ethernet6_mode, S_IRUGO, portmode_show, NULL);
-#endif
-
-
-/*
- * PHY driver
- */
-
-static int
-mv88e6176_config_init(struct phy_device *pdev)
-{
-	dev_dbg(&pdev->dev, "%s\n", __func__);
-	pdev->state = PHY_RUNNING;
-
-	return 0;
-}
-
-/* check MV88E1111 PHY status and MV88E6176 GPIO */
-static int
-mv88e6176_read_status(struct phy_device *pdev)
-{
-	struct mv88e1111_priv *priv = dev_get_drvdata(&pdev->dev);
-	struct mv88e1111_port_state *state;
-	bool serdes, sfp_present, sfp_signal;
-	int port;
-	int ret = 0;
-	u16 gpio;
-
-	dev_dbg(&pdev->dev, "%s", __func__);
-	gpio = read_switch_scratch(pdev, MV_GPIO_DATA);
-	for (port = 5; port < 7; port++) {
-		serdes = (read_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_SR)
-			 & (1<<13)) ? 1 : 0;
-		dev_dbg(&pdev->dev, "%s: Port%d GPIO:0x%02x SerDes:%d\n",
-			__func__, port, gpio, serdes);
-		switch(port) {
-		case 5:
-			state = &priv->port5;
-			sfp_present = !((gpio >> 5) & 1);
-			sfp_signal = !((gpio >> 6) & 1);
-			break;
-		case 6:
-			state = &priv->port6;
-			sfp_present = !((gpio >> 3) & 1);
-			sfp_signal = !((gpio >> 4) & 1);
-			break;
-		}
-
-		/*
-		 * on sfp_detect read/verify SFP MSA and set sfp_compat
-		 * on sfp_signal issue link down?
-		 * on serdes auto-select
-		 */
-		if (state->sfp_present != sfp_present) {
-			state->sfp_present = sfp_present;
-			dev_info(&pdev->dev, "Port%d: SFP %s\n",
-				 port, sfp_present ? "inserted" : "removed");
-			if (state->sfp_present) {
-				if (gw16083_read_port_sfp(priv->client, state))
-					state->sfp_compat = false;
-				else
-					state->sfp_compat = true;
-			} else {
-				state->sfp_compat = false;
-				state->sfp_enabled = false;
-			}
-		}
-		if (state->sfp_signal != sfp_signal) {
-			state->sfp_signal = sfp_signal;
-			dev_info(&pdev->dev, "Port%d: SFP signal %s\n",
-				 port, sfp_signal ? "detected" : "lost");
-		}
-		if (state->serdes != serdes) {
-			state->serdes = serdes;
-			dev_info(&pdev->dev, "Port%d: %s auto-selected\n",
-				 port, serdes ? "SERDES" : "copper");
-
-			/*
-			 * if auto-selection has switched to copper
-			 * disable serdes
-			 */
-			if (!serdes) {
-				config_mv88e1111_port_sfp(pdev, port, 0);
-				state->sfp_enabled = false;
-			}
-		}
-
-		/*
-		 * if serdes and compatible SFP module and not yet enabled
-		 * then enable for serdes
-		 */
-		if (serdes && state->sfp_compat && state->sfp_signal &&
-		    !state->sfp_enabled)
-		{
-			if (!config_mv88e1111_port_sfp(pdev, port, 1))
-				state->sfp_enabled = true;
-		}
-	}
-
-	return ret;
-}
-
-static int
-mv88e6176_config_aneg(struct phy_device *pdev)
-{
-	dev_dbg(&pdev->dev, "%s", __func__);
-	return 0;
-}
-
-static void
-mv88e6176_remove(struct phy_device *pdev)
-{
-	dev_dbg(&pdev->dev, "%s", __func__);
-
-	device_remove_file(&pdev->dev, &dev_attr_ethernet1);
-	device_remove_file(&pdev->dev, &dev_attr_ethernet2);
-	device_remove_file(&pdev->dev, &dev_attr_ethernet3);
-	device_remove_file(&pdev->dev, &dev_attr_ethernet4);
-	device_remove_file(&pdev->dev, &dev_attr_ethernet5);
-	device_remove_file(&pdev->dev, &dev_attr_ethernet6);
-	device_remove_file(&pdev->dev, &dev_attr_ethernet5_sfp);
-	device_remove_file(&pdev->dev, &dev_attr_ethernet6_sfp);
-	device_remove_file(&pdev->dev, &dev_attr_ethernet5_mode);
-	device_remove_file(&pdev->dev, &dev_attr_ethernet6_mode);
-	sysfs_remove_link(kernel_kobj, "gw16083");
-}
-
-static int
-mv88e6176_probe(struct phy_device *pdev)
-{
-	int port;
-	int ret = 0;
-	u32 id, reg;
-	struct mv88e1111_priv *priv;
-
-	dev_dbg(&pdev->dev, "%s: addr=0x%02x bus=%s:%s gw16083_client=%p\n",
-		__func__, pdev->addr, pdev->bus->name, pdev->bus->id,
-		gw16083_client);
-
-	/* In single-chip addressing mode the MV88E6176 shows up on 0x10-0x16 */
-	if (pdev->addr != MV_BASE)
-		return 0;
-
-	/* i2c driver needs to be loaded first */
-	if (!gw16083_client)
-		return 0;
-
-	/* gw16083 has MV88E1676 hanging off of i210 mdio bus */
-	if (strcmp(pdev->bus->name, "igb_enet_mii_bus") != 0)
-		return 0;
-
-	//dev_info(&pdev->dev, "Detected");
-	dev_info(&gw16083_client->dev, "%s: MV88E6176 7-port switch detected",
-		 pdev->bus->id);
-
-	/*
-	 * port5/6 config: MV88E1111 PHY
-	 * Register 20: PHY Control Register
-	 *   R20_7: add delay to RX_CLK for RXD
-	 *   R20_1: add delay to TX_CLK for TXD
-	 * Register 24: LED Control Register
-	 *   0x4111:
-	 *     Pulse stretch 170 to 340 ms
-	 * Register 0: Control Register
-	 *   R0_15: phy reset
-	 */
-	for (port = 5; port < 7; port++) {
-#ifndef RGMII_DELAY_ON_PHY
-		write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, 0xC003);
-#endif
-
-		id = read_switch_port_phy(pdev, port,
-					  MII_M1111_PHY_IDENT0) << 16;
-		id |= read_switch_port_phy(pdev, port, MII_M1111_PHY_IDENT1);
-		if ((id & MII_M1111_PHY_ID_MASK) != MII_M1111_PHY_ID) {
-			dev_err(&gw16083_client->dev,
-				"Port%d: No MV88E1111 PHY detected", port);
-			return 0;
-			//continue;
-		}
-
-#ifdef RGMII_DELAY_ON_PHY
-		/* phy rx/tx delay */
-		reg = read_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_CR);
-		reg |= (1<<1) | (1<<7);
-		write_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_CR, reg);
-#endif
-		/* led config */
-		write_switch_port_phy(pdev, port, MII_M1111_PHY_LED_CONTROL,
-				      MII_M1111_PHY_LED_PULSE_STR);
-		/* reset phy */
-		reg = read_switch_port_phy(pdev, port, MII_M1111_PHY_CONTROL);
-		reg |= MII_M1111_PHY_CONTROL_RESET;
-		write_switch_port_phy(pdev, port, MII_M1111_PHY_CONTROL, reg);
-		dev_info(&gw16083_client->dev,
-			 "Port%d MV88E111 PHY configured\n", port);
-	}
-
-	/*
-	 * GPIO Configuration:
-	 *  GPIO1: FIB5_TXEN# (output)
-	 *  GPIO2: FIB6_TXEN# (output)
-	 *  GPIO3: FIB6_PRES# (input)
-	 *  GPIO4: FIB6_LOS   (input)
-	 *  GPIO5: FIB5_PRES# (input)
-	 *  GPIO6: FIB5_LOS   (input)
-	 */
-	write_switch_scratch(pdev, MV_GPIO_DATA, 0x06); /* GPIO[2:1] out hi */
-	write_switch_scratch(pdev, MV_GPIO_DIR,  0x78); /* GPIO[6:3] inp */
-
-	pdev->irq = PHY_POLL;
-
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-	memset(priv, 0, sizeof(*priv));
-	priv->phydev = pdev;
-	priv->client = gw16083_client;
-	priv->port5.port = 5;
-	priv->port6.port = 6;
-	dev_set_drvdata(&pdev->dev, priv);
-
-	ret |= device_create_file(&pdev->dev, &dev_attr_ethernet1);
-	ret |= device_create_file(&pdev->dev, &dev_attr_ethernet2);
-	ret |= device_create_file(&pdev->dev, &dev_attr_ethernet3);
-	ret |= device_create_file(&pdev->dev, &dev_attr_ethernet4);
-	ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5);
-	ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6);
-	ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5_sfp);
-	ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6_sfp);
-	ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5_mode);
-	ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6_mode);
-
-	if (unlikely(ret))
-		dev_err(&pdev->dev, "Failed creating attrs\n");
-
-	/* Add a nice symlink to the real device */
-	ret = sysfs_create_link(kernel_kobj, &pdev->dev.kobj, "gw16083");
-
-	dev_dbg(&pdev->dev, "initial state: GPIO=0x%02x "
-		"Port5_serdes=%d Port6_serdes=%d\n",
-		read_switch_scratch(pdev, MV_GPIO_DATA),
-		(read_switch_port_phy(pdev, 5, MII_M1111_PHY_EXT_SR)
-		 & (1<<13) ? 1:0),
-		(read_switch_port_phy(pdev, 6, MII_M1111_PHY_EXT_SR)
-		 & (1<<13) ? 1:0));
-
-	return ret;
-}
-
-static struct phy_driver mv88e6176_phy_driver = {
-	.name		= "MV88E6176",
-	.phy_id		= MV_IDENT_VALUE,
-	.phy_id_mask	= MV_IDENT_MASK,
-	.features	= PHY_BASIC_FEATURES,
-	.probe		= &mv88e6176_probe,
-	.remove		= &mv88e6176_remove,
-	.config_init	= &mv88e6176_config_init,
-	.config_aneg	= &mv88e6176_config_aneg,
-	.read_status	= &mv88e6176_read_status,
-	.driver		= { .owner = THIS_MODULE },
-};
-
-/*
- * I2C driver
- */
-
-/* See SFF-8472 */
-struct sfp_msa {
-	/* Basic ID fields */
-	u8	identifier;
-	u8	ext_identifier;
-	u8	connector;
-	u8	transceiver[8];
-	u8	encoding;
-	u8	br_nominal;
-	u8	rate_identifier;
-	u8	length_smf_km;
-	u8	length_smf;
-	u8	length_om2;
-	u8	length_om1;
-	u8	length_om4;
-	u8	length_om3;
-	u8	vendor_name[16];
-	u8	transceiver2;
-	u8	vendor_oui[3];
-	u8	vendor_pn[16];
-	u8	vendor_rev[4];
-	u8	wavelength[2];
-	u8	resv1;
-	u8	cc_base;
-
-	/* extended id fields */
-	u8	options[2];
-	u8	br_max;
-	u8	br_min;
-	u8	vendor_sn[16];
-	u8	date_code[8];
-	u8	diags_type;
-	u8	enhanced_options;
-	u8	sff8472_compliance;
-	u8	cc_ext;
-
-	/* Vendor specific ID fields */
-	u8	vendor_data[32];
-	u8	sff8079[128];
-};
-
-enum identifier {
-	UNKNOWN,
-	GBIC,
-	SFF,
-	SFP,
-	XBI,
-	XENPACK,
-	XFP,
-	XFF,
-	XFP_E,
-	XPAK,
-	X2,
-	DWDM_SFP,
-	QSFP,
-	MAX_ID,
-};
-
-const char* id_names[] = {
-	"UNKONWN",
-	"GBIC",
-	"SFF",
-	"SFP",
-	NULL,
-};
-
-/* Flags for SFP modules compatible with ETH up to 1Gb */
-struct sfp_flags {
-	u8 e1000_base_sx:1;
-	u8 e1000_base_lx:1;
-	u8 e1000_base_cx:1;
-	u8 e1000_base_t:1;
-	u8 e100_base_lx:1;
-	u8 e100_base_fx:1;
-	u8 e10_base_bx10:1;
-	u8 e10_base_px:1;
-};
-
-#define STRING_APPEND(str, src)				\
-	strncat(str, src, sizeof(src));			\
-	for (i = 1; i < sizeof(str); i++)		\
-		if (str[i-1] == ' ' && str[i] == ' ')	\
-			str[i] = 0;
-
-static int gw16083_read_port_sfp(struct i2c_client *client,
-				 struct mv88e1111_port_state *state)
-{
-	int ret = 0;
-	u8 data[256];
-	struct sfp_flags *eth_flags;
-	u8 crc;
-	int i;
-	u8 *str;
-	struct sfp_msa *sfp_msa = (struct sfp_msa *)data;
-	int port = state->port;
-	union i2c_smbus_data d;
-
-	dev_dbg(&client->dev, "%s Port%d\n", __func__, port);
-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_READ_I2C_BLOCK))
-		return -ENODEV;
-	d.byte = (port == 5) ? 1 : 2;
-	if (i2c_smbus_xfer(client->adapter, GW16083_I2C_ADDR_PCA9543,
-			   client->flags, I2C_SMBUS_WRITE, 0,
-			   I2C_SMBUS_BYTE_DATA, &d) < 0)
-	{
-		dev_err(&client->dev,
-			"Port%d: failed writing PCA9543 register\n", port);
-		return ret;
-	}
-
-	/* read all 256 bytes of SFP EEPROM */
-	for (i = 0; i < sizeof(data); i += I2C_SMBUS_BLOCK_MAX) {
-		d.block[0] = I2C_SMBUS_BLOCK_MAX;
-		if (i2c_smbus_xfer(client->adapter, GW16083_I2C_ADDR_SFP1,
-				   client->flags, I2C_SMBUS_READ, i,
-				   I2C_SMBUS_I2C_BLOCK_DATA, &d) < 0)
-		{
-			dev_err(&client->dev,
-				"Port%d: failed reading SFP data\n", port);
-			return ret;
-		}
-		memcpy(data + i, d.block + 1, I2C_SMBUS_BLOCK_MAX);
-	}
-
-	/* Validate checksums */
-	for (crc = 0, i = 0; i < 63; i++)
-		crc += data[i];
-	if (crc != sfp_msa->cc_base) {
-		dev_err(&client->dev, "Port%d: "
-			"Checksum failure for Base ID fields: 0x%02x\n", port,
-			crc);
-#ifdef FAIL_ON_CHECKSUM_ERR
-		return -EINVAL;
-#endif
-	}
-	for (crc = 0, i = 64; i < 95; i++)
-		crc += data[i];
-	if (crc != sfp_msa->cc_ext) {
-		dev_err(&client->dev, "Port%d: "
-			"Checksum failure for Extended ID fields: 0x%02x\n",
-			port, crc);
-#ifdef FAIL_ON_CHECKSUM_ERR
-		return -EINVAL;
-#endif
-	}
-	state->sfp_id[0] = 0;
-	for (i = 0; id_names[i]; i++) {
-		if (sfp_msa->identifier == i) {
-			sprintf(state->sfp_id, "%s: ", id_names[i]);
-			break;
-		}
-	}
-	STRING_APPEND(state->sfp_id, sfp_msa->vendor_oui);
-	STRING_APPEND(state->sfp_id, sfp_msa->vendor_name);
-	STRING_APPEND(state->sfp_id, sfp_msa->vendor_pn);
-	STRING_APPEND(state->sfp_id, sfp_msa->vendor_rev);
-	STRING_APPEND(state->sfp_id, sfp_msa->vendor_sn);
-	dev_info(&client->dev, "Port%d: %s\n", port, state->sfp_id);
-
-	if ((sfp_msa->identifier != GBIC) &&
-	    (sfp_msa->identifier != SFF) &&
-	    (sfp_msa->identifier != SFP))
-	{
-		dev_err(&client->dev, "Port%d: Unknown module identifier: %d\n",
-			port, sfp_msa->identifier);
-		return -EINVAL;
-	}
-
-	str = "";
-	eth_flags = (struct sfp_flags *)(sfp_msa->transceiver + 3);
-	if (eth_flags->e1000_base_sx) {
-		str = "1000Base-SX (Fiber)";
-	} else if (eth_flags->e1000_base_lx) {
-		str = "1000Base-LX (Fiber)";
-	} else if (eth_flags->e1000_base_t) {
-		str = "1000Base-T (Copper)";
-	} else if (eth_flags->e100_base_fx) {
-		str = "100Base-FX (Fiber) - not supported";
-		ret = -EINVAL;
-	} else {
-		str = "Unknown/Unsupported media type";
-		ret = -EINVAL;
-	}
-	if (ret)
-		dev_err(&client->dev, "Port%d: %s (0x%02x)\n", port, str,
-			sfp_msa->transceiver[3]);
-	else
-		dev_info(&client->dev, "Port%d: %s (0x%02x)\n", port, str,
-			sfp_msa->transceiver[3]);
-
-	return ret;
-}
-
-static int gw16083_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	int ret;
-
-	dev_info(&client->dev, "GW16083 Ethernet Expansion Mezzanine\n");
-	if (gw16083_client) {
-		dev_err(&client->dev, "client already registered\n");
-		return -EINVAL;
-	}
-	gw16083_client = client;
-
-	ret = phy_driver_register(&mv88e6176_phy_driver);
-	if (ret)
-		dev_err(&client->dev,
-			"failed to register mv88e6176 phy driver: %d\n", ret);
-	return ret;
-}
-
-static int gw16083_remove(struct i2c_client *client)
-{
-	dev_dbg(&client->dev, "%s\n", __func__);
-
-	phy_driver_unregister(&mv88e6176_phy_driver);
-	gw16083_client = NULL;
-	return 0;
-}
-
-static const struct of_device_id gw16083_dt_ids[] = {
-	{ .compatible = "gateworks,gw16083", },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(of, gw16083_dt_ids);
-
-static const struct i2c_device_id gw16083_id[] = {
-	{ "gw16083", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, gw16083_id);
-
-static struct i2c_driver gw16083_driver = {
-	.driver = {
-		.name	= "gw16083",
-		.of_match_table = gw16083_dt_ids,
-	},
-	.probe		= gw16083_probe,
-	.remove		= gw16083_remove,
-	.id_table	= gw16083_id,
-};
-
-static int __init mv88e6176_init(void)
-{
-	return i2c_add_driver(&gw16083_driver);
-}
-
-static void __exit mv88e6176_exit(void)
-{
-	i2c_del_driver(&gw16083_driver);
-}
-
-module_init(mv88e6176_init);
-module_exit(mv88e6176_exit);
diff --git a/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.h b/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.h
deleted file mode 100644
index db96f2b..0000000
--- a/target/linux/imx6/files-3.14/drivers/net/phy/gw16083.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * drivers/net/phy/mv88e6176.h
- *
- * Driver for Marvell Switch
- *
- * Author: Tim Harvey
- *
- * Copyright (c) 2014 Tim Harvey <tharvey@gateworks.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _GW16083_H_
-#define _GW16083_H_
-
-#define MII_MARVELL_PHY_PAGE		22
-
-/*
- * I2C Addresses
- */
-#define GW16083_I2C_ADDR_SFP1		0x50
-#define GW16083_I2C_ADDR_SFP2		0x51
-#define GW16083_I2C_ADDR_EEPROM		0x52
-#define GW16083_I2C_ADDR_PCA9543	0x70
-
-/*
- * MV88E1111 PHY Registers
- */
-enum {
-	MII_M1111_PHY_CONTROL		= 0,
-	MII_M1111_PHY_STATUS 		= 1,
-	MII_M1111_PHY_IDENT0		= 2,
-	MII_M1111_PHY_IDENT1		= 3,
-	MII_M1111_PHY_EXT_CR		= 20,
-	MII_M1111_PHY_LED_CONTROL	= 24,
-	MII_M1111_PHY_EXT_SR		= 27,
-};
-
-#define MII_M1111_PHY_ID_MASK		0xfffffff0
-#define MII_M1111_PHY_ID		0x01410cc0
-
-#define MII_M1111_PHY_CONTROL_RESET	(1 << 15)
-#define MII_M1111_PHY_LED_DIRECT	0x4100
-#define MII_M1111_PHY_LED_PULSE_STR	0x4111
-#define MII_M1111_PHY_LED_COMBINE	0x411c
-#define MII_M1111_RX_DELAY		0x80
-#define MII_M1111_TX_DELAY		0x2
-
-/*
- * MV88E6176 Switch Registers
- */
-
-/* PHY Addrs */
-#define MV_BASE		0x10
-#define MV_GLOBAL1	0x1b
-#define MV_GLOBAL2	0x1c
-#define MV_GLOBAL3	0x1d
-
-/* Global2 Registers */
-enum {
-	MV_SMI_PHY_COMMAND	= 0x18,
-	MV_SMI_PHY_DATA		= 0x19,
-	MV_SCRATCH_MISC		= 0x1A,
-};
-
-/* Scratch And Misc Reg offsets */
-enum {
-	MV_GPIO_MODE		= 0x60,
-	MV_GPIO_DIR		= 0x62,
-	MV_GPIO_DATA		= 0x64,
-	MV_GPIO76_CNTL		= 0x6B,
-	MV_GPIO54_CNTL		= 0x6A,
-	MV_GPIO32_CNTL		= 0x69,
-	MV_GPIO10_CNTL		= 0x68,
-	MV_CONFIG0		= 0x70,
-	MV_CONFIG1		= 0x71,
-	MV_CONFIG2		= 0x72,
-	MV_CONFIG3		= 0x73,
-};
-
-/* PHY Registers */
-enum {
-	MV_PHY_CONTROL      = 0x00,
-	MV_PHY_STATUS       = 0x01,
-	MV_PHY_IDENT0       = 0x02,
-	MV_PHY_IDENT1       = 0x03,
-	MV_PHY_ANEG         = 0x04,
-	MV_PHY_LINK_ABILITY = 0x05,
-	MV_PHY_ANEG_EXPAND  = 0x06,
-	MV_PHY_XMIT_NEXTP   = 0x07,
-	MV_PHY_LINK_NEXTP   = 0x08,
-	MV_PHY_CONTROL1     = 0x10,
-	MV_PHY_STATUS1      = 0x11,
-	MV_PHY_INTR_EN      = 0x12,
-};
-
-/* Port Registers */
-enum {
-	MV_PORT_STATUS      	= 0x00,
-	MV_PORT_PHYS_CONTROL	= 0x01,
-	MV_PORT_IDENT       	= 0x03,
-	MV_PORT_CONTROL     	= 0x04,
-	MV_PORT_VLANMAP     	= 0x06,
-	MV_PORT_ASSOC       	= 0x0b,
-	MV_PORT_RXCOUNT     	= 0x10,
-	MV_PORT_TXCOUNT     	= 0x11,
-};
-
-#define SMIBUSY		(1<<15)
-#define SMIMODE22	(1<<12)
-#define SMIOP_READ	(2<<10)
-#define SMIOP_WRITE	(1<<10)
-#define DEVADDR		5
-#define REGADDR		0
-
-#define MV_IDENT_MASK		0x0000fff0
-#define MV_IDENT_VALUE		0x00001760
-
-#endif /* _GW16083_H_ */
diff --git a/target/linux/imx6/patches-3.14/0001-ARM-dts-disable-flexcan-by-default.patch b/target/linux/imx6/patches-3.14/0001-ARM-dts-disable-flexcan-by-default.patch
deleted file mode 100644
index babd544..0000000
--- a/target/linux/imx6/patches-3.14/0001-ARM-dts-disable-flexcan-by-default.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 1759b172f78263de7077a2743e11f3b718682849 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:27 -0700
-Subject: [PATCH 1/3] ARM: dts: disable flexcan by default
-
-Typically nodes are disabled by default and enabled when needed.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -331,6 +331,7 @@
- 				interrupts = <0 110 0x04>;
- 				clocks = <&clks 108>, <&clks 109>;
- 				clock-names = "ipg", "per";
-+				status = "disabled";
- 			};
- 
- 			can2: flexcan@02094000 {
-@@ -339,6 +340,7 @@
- 				interrupts = <0 111 0x04>;
- 				clocks = <&clks 110>, <&clks 111>;
- 				clock-names = "ipg", "per";
-+				status = "disabled";
- 			};
- 
- 			gpt: gpt@02098000 {
diff --git a/target/linux/imx6/patches-3.14/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch b/target/linux/imx6/patches-3.14/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch
deleted file mode 100644
index f2d7f6c..0000000
--- a/target/linux/imx6/patches-3.14/0002-ARM-dts-added-several-new-imx-pinmux-groups.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 925467009cc6d92edb02b9e68710db022cd56f41 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:25 -0700
-Subject: [PATCH 2/3] ARM: dts: added several new imx-pinmux groups
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -639,6 +639,14 @@
- 							MX6QDL_PAD_DISP0_DAT19__AUD5_RXD  0x80000000
- 						>;
- 					};
-+
-+					pinctrl_audmux_4: audmux-4 {
-+						fsl,pins = <
-+							MX6QDL_PAD_EIM_D24__AUD5_RXFS     0x80000000
-+							MX6QDL_PAD_EIM_D25__AUD5_RXC      0x80000000
-+							MX6QDL_PAD_DISP0_DAT19__AUD5_RXD  0x80000000
-+						>;
-+					};
- 				};
- 
- 				ecspi1 {
-@@ -811,6 +819,28 @@
- 							MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
- 						>;
- 					};
-+
-+					/* No Strobe */
-+					pinctrl_gpmi_nand_2: gpmi-nand-2 {
-+						fsl,pins = <
-+							MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-+							MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-+							MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-+							MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+							MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-+							MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-+							MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-+							MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-+							MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-+							MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-+							MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-+							MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-+							MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-+							MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-+							MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-+							MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-+						>;
-+					};
- 				};
- 
- 				hdmi_hdcp {
-@@ -1058,6 +1088,13 @@
- 							MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- 						>;
- 					};
-+
-+					pinctrl_uart1_2: uart1grp-2 {
-+						fsl,pins = <
-+							MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+							MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+						>;
-+					};
- 				};
- 
- 				uart2 {
-@@ -1076,6 +1113,13 @@
- 							MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
- 						>;
- 					};
-+
-+					pinctrl_uart2_3: uart2grp-3 {
-+						fsl,pins = <
-+							MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+							MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+						>;
-+					};
- 				};
- 
- 				uart3 {
-@@ -1096,6 +1140,13 @@
- 							MX6QDL_PAD_EIM_EB3__UART3_RTS_B	  0x1b0b1
- 						>;
- 					};
-+
-+					pinctrl_uart3_3: uart3grp-3 {
-+						fsl,pins = <
-+							MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+							MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+						>;
-+					};
- 				};
- 
- 				uart4 {
-@@ -1106,6 +1157,15 @@
- 						>;
- 					};
- 				};
-+
-+				uart5 {
-+					pinctrl_uart5_1: uart5grp-1 {
-+						fsl,pins = <
-+							MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+							MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+						>;
-+					};
-+				};
- 
- 				usbotg {
- 					pinctrl_usbotg_1: usbotggrp-1 {
diff --git a/target/linux/imx6/patches-3.14/0003-ARM-dts-add-Gateworks-Ventana-support.patch b/target/linux/imx6/patches-3.14/0003-ARM-dts-add-Gateworks-Ventana-support.patch
deleted file mode 100644
index cfc2898..0000000
--- a/target/linux/imx6/patches-3.14/0003-ARM-dts-add-Gateworks-Ventana-support.patch
+++ /dev/null
@@ -1,2886 +0,0 @@
-From e3946fe8050534ccaf8c1266cb1fa90c7f3345c3 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Fri, 7 Feb 2014 15:24:56 +0800
-Subject: [PATCH] ARM: dts: add Gateworks Ventana support
-
-The Gateworks Ventana product family consists of several baseboard designs
-based on the Freescale i.MX6 family of processors.  Each baseboard has a
-different set of possible features.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/Makefile            |   9 +
- arch/arm/boot/dts/imx6dl-gw51xx.dts   |  19 ++
- arch/arm/boot/dts/imx6dl-gw52xx.dts   |  19 ++
- arch/arm/boot/dts/imx6dl-gw53xx.dts   |  19 ++
- arch/arm/boot/dts/imx6dl-gw54xx.dts   |  19 ++
- arch/arm/boot/dts/imx6q-gw51xx.dts    |  19 ++
- arch/arm/boot/dts/imx6q-gw52xx.dts    |  23 ++
- arch/arm/boot/dts/imx6q-gw53xx.dts    |  23 ++
- arch/arm/boot/dts/imx6q-gw5400-a.dts  | 546 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6q-gw54xx.dts    |  23 ++
- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 374 ++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 490 ++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 553 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 580 ++++++++++++++++++++++++++++++++++
- 14 files changed, 2716 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -154,12 +154,21 @@ dtb-$(CONFIG_ARCH_MXC) += \
- 	imx53-qsb.dtb \
- 	imx53-smd.dtb \
- 	imx6dl-cubox-i.dtb \
-+	imx6dl-gw51xx.dtb \
-+	imx6dl-gw52xx.dtb \
-+	imx6dl-gw53xx.dtb \
-+	imx6dl-gw54xx.dtb \
- 	imx6dl-hummingboard.dtb \
- 	imx6dl-sabreauto.dtb \
- 	imx6dl-sabresd.dtb \
- 	imx6dl-wandboard.dtb \
- 	imx6q-arm2.dtb \
- 	imx6q-cubox-i.dtb \
-+	imx6q-gw51xx.dtb \
-+	imx6q-gw52xx.dtb \
-+	imx6q-gw53xx.dtb \
-+	imx6q-gw5400-a.dtb \
-+	imx6q-gw54xx.dtb \
- 	imx6q-phytec-pbab01.dtb \
- 	imx6q-sabreauto.dtb \
- 	imx6q-sabrelite.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw51xx.dtsi"
-+
-+/ {
-+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX";
-+	compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw52xx.dtsi"
-+
-+/ {
-+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
-+	compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw53xx.dtsi"
-+
-+/ {
-+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
-+	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
-+	compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw51xx.dtsi"
-+
-+/ {
-+	model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX";
-+	compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw52xx.dtsi"
-+
-+/ {
-+	model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX";
-+	compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+	status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw53xx.dtsi"
-+
-+/ {
-+	model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX";
-+	compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+	status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
-@@ -0,0 +1,543 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+
-+/ {
-+	model = "Gateworks Ventana GW5400-A";
-+	compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
-+
-+	/* these are used by bootloader for disabling nodes */
-+	aliases {
-+		ethernet0 = &fec;
-+		ethernet1 = &eth1;
-+		i2c0 = &i2c1;
-+		i2c1 = &i2c2;
-+		i2c2 = &i2c3;
-+		led0 = &led0;
-+		led1 = &led1;
-+		led2 = &led2;
-+		sky2 = &eth1;
-+		ssi0 = &ssi1;
-+		spi0 = &ecspi1;
-+		usb0 = &usbh1;
-+		usb1 = &usbotg;
-+		usdhc2 = &usdhc3;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttymxc1,115200";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led0: user1 {
-+			label = "user1";
-+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+			default-state = "on";
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		led1: user2 {
-+			label = "user2";
-+			gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
-+			default-state = "off";
-+		};
-+
-+		led2: user3 {
-+			label = "user3";
-+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+			default-state = "off";
-+		};
-+	};
-+
-+	memory {
-+		reg = <0x10000000 0x40000000>;
-+	};
-+
-+	pps {
-+		compatible = "pps-gpio";
-+		gpios = <&gpio1 5 0>;
-+		status = "okay";
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		reg_1p0v: regulator@0 {
-+			compatible = "regulator-fixed";
-+			reg = <0>;
-+			regulator-name = "1P0V";
-+			regulator-min-microvolt = <1000000>;
-+			regulator-max-microvolt = <1000000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_3p3v: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "3P3V";
-+			regulator-min-microvolt = <3300000>;
-+			regulator-max-microvolt = <3300000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_usb_h1_vbus: regulator@2 {
-+			compatible = "regulator-fixed";
-+			reg = <2>;
-+			regulator-name = "usb_h1_vbus";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_usb_otg_vbus: regulator@3 {
-+			compatible = "regulator-fixed";
-+			reg = <3>;
-+			regulator-name = "usb_otg_vbus";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			gpio = <&gpio3 22 0>;
-+			enable-active-high;
-+		};
-+	};
-+
-+	sound {
-+		compatible = "fsl,imx6q-ventana-sgtl5000",
-+			     "fsl,imx-audio-sgtl5000";
-+		model = "sgtl5000-audio";
-+		ssi-controller = <&ssi1>;
-+		audio-codec = <&codec>;
-+		audio-routing =
-+			"MIC_IN", "Mic Jack",
-+			"Mic Jack", "Mic Bias",
-+			"Headphone Jack", "HP_OUT";
-+		mux-int-port = <1>;
-+		mux-ext-port = <4>;
-+	};
-+};
-+
-+&audmux {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_audmux>;
-+	status = "okay";
-+};
-+
-+&ecspi1 {
-+	fsl,spi-num-chipselects = <1>;
-+	cs-gpios = <&gpio3 19 0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_ecspi1>;
-+	status = "okay";
-+
-+	flash: m25p80@0 {
-+		compatible = "sst,w25q256";
-+		spi-max-frequency = <30000000>;
-+		reg = <0>;
-+	};
-+};
-+
-+&fec {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_enet>;
-+	phy-mode = "rgmii";
-+	phy-reset-gpios = <&gpio1 30 0>;
-+	status = "okay";
-+};
-+
-+&i2c1 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c1>;
-+	status = "okay";
-+
-+	eeprom1: eeprom@50 {
-+		compatible = "atmel,24c02";
-+		reg = <0x50>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom2: eeprom@51 {
-+		compatible = "atmel,24c02";
-+		reg = <0x51>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom3: eeprom@52 {
-+		compatible = "atmel,24c02";
-+		reg = <0x52>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom4: eeprom@53 {
-+		compatible = "atmel,24c02";
-+		reg = <0x53>;
-+		pagesize = <16>;
-+	};
-+
-+	gpio: pca9555@23 {
-+		compatible = "nxp,pca9555";
-+		reg = <0x23>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+	};
-+
-+	hwmon: gsc@29 {
-+		compatible = "gw,gsp";
-+		reg = <0x29>;
-+	};
-+
-+	rtc: ds1672@68 {
-+		compatible = "dallas,ds1672";
-+		reg = <0x68>;
-+	};
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c2>;
-+	status = "okay";
-+
-+	pmic: pfuze100@08 {
-+		compatible = "fsl,pfuze100";
-+		reg = <0x08>;
-+
-+		regulators {
-+			sw1a_reg: sw1ab {
-+				regulator-min-microvolt = <300000>;
-+				regulator-max-microvolt = <1875000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+				regulator-ramp-delay = <6250>;
-+			};
-+
-+			sw1c_reg: sw1c {
-+				regulator-min-microvolt = <300000>;
-+				regulator-max-microvolt = <1875000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+				regulator-ramp-delay = <6250>;
-+			};
-+
-+			sw2_reg: sw2 {
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <3950000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw3a_reg: sw3a {
-+				regulator-min-microvolt = <400000>;
-+				regulator-max-microvolt = <1975000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw3b_reg: sw3b {
-+				regulator-min-microvolt = <400000>;
-+				regulator-max-microvolt = <1975000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw4_reg: sw4 {
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <3300000>;
-+			};
-+
-+			swbst_reg: swbst {
-+				regulator-min-microvolt = <5000000>;
-+				regulator-max-microvolt = <5150000>;
-+			};
-+
-+			snvs_reg: vsnvs {
-+				regulator-min-microvolt = <1000000>;
-+				regulator-max-microvolt = <3000000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			vref_reg: vrefddr {
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			vgen1_reg: vgen1 {
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <1550000>;
-+			};
-+
-+			vgen2_reg: vgen2 {
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <1550000>;
-+			};
-+
-+			vgen3_reg: vgen3 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+			};
-+
-+			vgen4_reg: vgen4 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen5_reg: vgen5 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen6_reg: vgen6 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+		};
-+	};
-+
-+	pciswitch: pex8609@3f {
-+		compatible = "plx,pex8609";
-+		reg = <0x3f>;
-+	};
-+
-+	pciclkgen: si52147@6b {
-+		compatible = "sil,si52147";
-+		reg = <0x6b>;
-+	};
-+};
-+
-+&i2c3 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c3>;
-+	status = "okay";
-+
-+	accelerometer: mma8450@1c {
-+		compatible = "fsl,mma8450";
-+		reg = <0x1c>;
-+	};
-+
-+	codec: sgtl5000@0a {
-+		compatible = "fsl,sgtl5000";
-+		reg = <0x0a>;
-+		clocks = <&clks 201>;
-+		VDDA-supply = <&sw4_reg>;
-+		VDDIO-supply = <&reg_3p3v>;
-+	};
-+
-+	hdmiin: adv7611@4c {
-+		compatible = "adi,adv7611";
-+		reg = <0x4c>;
-+	};
-+
-+	touchscreen: egalax_ts@04 {
-+		compatible = "eeti,egalax_ts";
-+		reg = <0x04>;
-+		interrupt-parent = <&gpio7>;
-+		interrupts = <12 2>; /* gpio7_12 active low */
-+		wakeup-gpios = <&gpio7 12 0>;
-+	};
-+
-+	videoout: adv7393@2a {
-+		compatible = "adi,adv7393";
-+		reg = <0x2a>;
-+	};
-+
-+	videoin: adv7180@20 {
-+		compatible = "adi,adv7180";
-+		reg = <0x20>;
-+	};
-+};
-+
-+&iomuxc {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_hog>;
-+
-+	imx6q-gw5400-a {
-+		pinctrl_hog: hoggrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
-+				MX6QDL_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
-+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
-+				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
-+				MX6QDL_PAD_GPIO_5__GPIO1_IO05     0x80000000 /* GPS_PPS */
-+				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
-+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
-+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10   0x80000000 /* user2 led */
-+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
-+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
-+				MX6QDL_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
-+			 >;
-+		};
-+
-+		pinctrl_audmux: audmuxgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-+			>;
-+		};
-+
-+		pinctrl_ecspi1: ecspi1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-+			>;
-+		};
-+
-+		pinctrl_enet: enetgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-+			>;
-+		};
-+
-+		pinctrl_i2c1: i2c1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_i2c2: i2c2grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_i2c3: i2c3grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_uart1: uart1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart2: uart2grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart5: uart5grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_usbotg: usbotggrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-+			>;
-+		};
-+
-+		pinctrl_usdhc3: usdhc3grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-+			>;
-+		};
-+	};
-+};
-+
-+&ldb {
-+	status = "okay";
-+};
-+
-+&pcie {
-+	reset-gpio = <&gpio1 29 0>;
-+	status = "okay";
-+
-+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+		compatible = "marvell,sky2";
-+	};
-+};
-+
-+&ssi1 {
-+	fsl,mode = "i2s-slave";
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart1>;
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart2>;
-+	status = "okay";
-+};
-+
-+&uart5 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart5>;
-+	status = "okay";
-+};
-+
-+&usbotg {
-+	vbus-supply = <&reg_usb_otg_vbus>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usbotg>;
-+	disable-over-current;
-+	status = "okay";
-+};
-+
-+&usbh1 {
-+	vbus-supply = <&reg_usb_h1_vbus>;
-+	status = "okay";
-+};
-+
-+&usdhc3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usdhc3>;
-+	cd-gpios = <&gpio7 0 0>;
-+	vmmc-supply = <&reg_3p3v>;
-+	status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+	model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
-+	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+	status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-@@ -0,0 +1,374 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+	/* these are used by bootloader for disabling nodes */
-+	aliases {
-+		can0 = &can1;
-+		ethernet0 = &fec;
-+		led0 = &led0;
-+		led1 = &led1;
-+		nand = &gpmi;
-+		usb0 = &usbh1;
-+		usb1 = &usbotg;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttymxc1,115200";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led0: user1 {
-+			label = "user1";
-+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+			default-state = "on";
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		led1: user2 {
-+			label = "user2";
-+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+			default-state = "off";
-+		};
-+	};
-+
-+	memory {
-+		reg = <0x10000000 0x20000000>;
-+	};
-+
-+	pps {
-+		compatible = "pps-gpio";
-+		gpios = <&gpio1 26 0>;
-+		status = "okay";
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		reg_3p3v: regulator@0 {
-+			compatible = "regulator-fixed";
-+			reg = <0>;
-+			regulator-name = "3P3V";
-+			regulator-min-microvolt = <3300000>;
-+			regulator-max-microvolt = <3300000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_5p0v: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "5P0V";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_usb_otg_vbus: regulator@2 {
-+			compatible = "regulator-fixed";
-+			reg = <2>;
-+			regulator-name = "usb_otg_vbus";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			gpio = <&gpio3 22 0>;
-+			enable-active-high;
-+		};
-+	};
-+};
-+
-+&fec {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_enet>;
-+	phy-mode = "rgmii";
-+	phy-reset-gpios = <&gpio1 30 0>;
-+	status = "okay";
-+};
-+
-+&gpmi {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_gpmi_nand>;
-+	status = "okay";
-+};
-+
-+&i2c1 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c1>;
-+	status = "okay";
-+
-+	eeprom1: eeprom@50 {
-+		compatible = "atmel,24c02";
-+		reg = <0x50>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom2: eeprom@51 {
-+		compatible = "atmel,24c02";
-+		reg = <0x51>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom3: eeprom@52 {
-+		compatible = "atmel,24c02";
-+		reg = <0x52>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom4: eeprom@53 {
-+		compatible = "atmel,24c02";
-+		reg = <0x53>;
-+		pagesize = <16>;
-+	};
-+
-+	gpio: pca9555@23 {
-+		compatible = "nxp,pca9555";
-+		reg = <0x23>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+	};
-+
-+	hwmon: gsc@29 {
-+		compatible = "gw,gsp";
-+		reg = <0x29>;
-+	};
-+
-+	rtc: ds1672@68 {
-+		compatible = "dallas,ds1672";
-+		reg = <0x68>;
-+	};
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c2>;
-+	status = "okay";
-+
-+	pmic: ltc3676@3c {
-+		compatible = "ltc,ltc3676";
-+		reg = <0x3c>;
-+
-+		regulators {
-+			sw1_reg: ltc3676__sw1 {
-+				regulator-min-microvolt = <1175000>;
-+				regulator-max-microvolt = <1175000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw2_reg: ltc3676__sw2 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw3_reg: ltc3676__sw3 {
-+				regulator-min-microvolt = <1175000>;
-+				regulator-max-microvolt = <1175000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw4_reg: ltc3676__sw4 {
-+				regulator-min-microvolt = <1500000>;
-+				regulator-max-microvolt = <1500000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			ldo2_reg: ltc3676__ldo2 {
-+				regulator-min-microvolt = <2500000>;
-+				regulator-max-microvolt = <2500000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			ldo4_reg: ltc3676__ldo4 {
-+				regulator-min-microvolt = <3000000>;
-+				regulator-max-microvolt = <3000000>;
-+			};
-+		};
-+	};
-+};
-+
-+&i2c3 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c3>;
-+	status = "okay";
-+
-+	videoin: adv7180@20 {
-+		compatible = "adi,adv7180";
-+		reg = <0x20>;
-+	};
-+};
-+
-+&iomuxc {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_hog>;
-+
-+	imx6qdl-gw51xx {
-+		pinctrl_hog: hoggrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
-+				MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
-+				MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
-+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-+				MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x80000000 /* PCIE_RST# */
-+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
-+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
-+			 >;
-+		};
-+
-+		pinctrl_enet: enetgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-+			>;
-+		};
-+
-+		pinctrl_gpmi_nand: gpminandgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-+			>;
-+		};
-+
-+		pinctrl_i2c1: i2c1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_i2c2: i2c2grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_i2c3: i2c3grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_uart1: uart1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart2: uart2grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart3: uart3grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart5: uart5grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_usbotg: usbotggrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-+			>;
-+		};
-+	};
-+};
-+
-+&pcie {
-+	reset-gpio = <&gpio1 0 0>;
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart1>;
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart2>;
-+	status = "okay";
-+};
-+
-+&uart3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart3>;
-+	status = "okay";
-+};
-+
-+&uart5 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart5>;
-+	status = "okay";
-+};
-+
-+&usbotg {
-+	vbus-supply = <&reg_usb_otg_vbus>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usbotg>;
-+	disable-over-current;
-+	status = "okay";
-+};
-+
-+&usbh1 {
-+	status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-@@ -0,0 +1,528 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+	/* these are used by bootloader for disabling nodes */
-+	aliases {
-+		ethernet0 = &fec;
-+		led0 = &led0;
-+		led1 = &led1;
-+		led2 = &led2;
-+		nand = &gpmi;
-+		ssi0 = &ssi1;
-+		usb0 = &usbh1;
-+		usb1 = &usbotg;
-+		usdhc2 = &usdhc3;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttymxc1,115200";
-+	};
-+
-+	backlight {
-+		compatible = "pwm-backlight";
-+		pwms = <&pwm4 0 5000000>;
-+		brightness-levels = <0 4 8 16 32 64 128 255>;
-+		default-brightness-level = <7>;
-+		status = "okay";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led0: user1 {
-+			label = "user1";
-+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+			default-state = "on";
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		led1: user2 {
-+			label = "user2";
-+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+			default-state = "off";
-+		};
-+
-+		led2: user3 {
-+			label = "user3";
-+			gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
-+			default-state = "off";
-+		};
-+	};
-+
-+	memory {
-+		reg = <0x10000000 0x20000000>;
-+	};
-+
-+	pps {
-+		compatible = "pps-gpio";
-+		gpios = <&gpio1 26 0>;
-+		status = "okay";
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		reg_1p0v: regulator@0 {
-+			compatible = "regulator-fixed";
-+			reg = <0>;
-+			regulator-name = "1P0V";
-+			regulator-min-microvolt = <1000000>;
-+			regulator-max-microvolt = <1000000>;
-+			regulator-always-on;
-+		};
-+
-+		/* remove this fixed regulator once ltc3676__sw2 driver available */
-+		reg_1p8v: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "1P8V";
-+			regulator-min-microvolt = <1800000>;
-+			regulator-max-microvolt = <1800000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_3p3v: regulator@2 {
-+			compatible = "regulator-fixed";
-+			reg = <2>;
-+			regulator-name = "3P3V";
-+			regulator-min-microvolt = <3300000>;
-+			regulator-max-microvolt = <3300000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_5p0v: regulator@3 {
-+			compatible = "regulator-fixed";
-+			reg = <3>;
-+			regulator-name = "5P0V";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_usb_otg_vbus: regulator@4 {
-+			compatible = "regulator-fixed";
-+			reg = <4>;
-+			regulator-name = "usb_otg_vbus";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			gpio = <&gpio3 22 0>;
-+			enable-active-high;
-+		};
-+	};
-+
-+	sound {
-+		compatible = "fsl,imx6q-ventana-sgtl5000",
-+			     "fsl,imx-audio-sgtl5000";
-+		model = "sgtl5000-audio";
-+		ssi-controller = <&ssi1>;
-+		audio-codec = <&codec>;
-+		audio-routing =
-+			"MIC_IN", "Mic Jack",
-+			"Mic Jack", "Mic Bias",
-+			"Headphone Jack", "HP_OUT";
-+		mux-int-port = <1>;
-+		mux-ext-port = <4>;
-+	};
-+};
-+
-+&audmux {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_audmux>;
-+	status = "okay";
-+};
-+
-+&fec {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_enet>;
-+	phy-mode = "rgmii";
-+	phy-reset-gpios = <&gpio1 30 0>;
-+	status = "okay";
-+};
-+
-+&gpmi {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_gpmi_nand>;
-+	status = "okay";
-+};
-+
-+&i2c1 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c1>;
-+	status = "okay";
-+
-+	eeprom1: eeprom@50 {
-+		compatible = "atmel,24c02";
-+		reg = <0x50>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom2: eeprom@51 {
-+		compatible = "atmel,24c02";
-+		reg = <0x51>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom3: eeprom@52 {
-+		compatible = "atmel,24c02";
-+		reg = <0x52>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom4: eeprom@53 {
-+		compatible = "atmel,24c02";
-+		reg = <0x53>;
-+		pagesize = <16>;
-+	};
-+
-+	gpio: pca9555@23 {
-+		compatible = "nxp,pca9555";
-+		reg = <0x23>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+	};
-+
-+	hwmon: gsc@29 {
-+		compatible = "gw,gsp";
-+		reg = <0x29>;
-+	};
-+
-+	rtc: ds1672@68 {
-+		compatible = "dallas,ds1672";
-+		reg = <0x68>;
-+	};
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c2>;
-+	status = "okay";
-+
-+	pciswitch: pex8609@3f {
-+		compatible = "plx,pex8609";
-+		reg = <0x3f>;
-+	};
-+
-+	pmic: ltc3676@3c {
-+		compatible = "ltc,ltc3676";
-+		reg = <0x3c>;
-+
-+		regulators {
-+			sw1_reg: ltc3676__sw1 {
-+				regulator-min-microvolt = <1175000>;
-+				regulator-max-microvolt = <1175000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw2_reg: ltc3676__sw2 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw3_reg: ltc3676__sw3 {
-+				regulator-min-microvolt = <1175000>;
-+				regulator-max-microvolt = <1175000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw4_reg: ltc3676__sw4 {
-+				regulator-min-microvolt = <1500000>;
-+				regulator-max-microvolt = <1500000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			ldo2_reg: ltc3676__ldo2 {
-+				regulator-min-microvolt = <2500000>;
-+				regulator-max-microvolt = <2500000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			ldo3_reg: ltc3676__ldo3 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			ldo4_reg: ltc3676__ldo4 {
-+				regulator-min-microvolt = <3000000>;
-+				regulator-max-microvolt = <3000000>;
-+			};
-+		};
-+	};
-+};
-+
-+&i2c3 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c3>;
-+	status = "okay";
-+
-+	accelerometer: fxos8700@1e {
-+		compatible = "fsl,fxos8700";
-+		reg = <0x13>;
-+	};
-+
-+	codec: sgtl5000@0a {
-+		compatible = "fsl,sgtl5000";
-+		reg = <0x0a>;
-+		clocks = <&clks 201>;
-+		VDDA-supply = <&reg_1p8v>;
-+		VDDIO-supply = <&reg_3p3v>;
-+	};
-+
-+	touchscreen: egalax_ts@04 {
-+		compatible = "eeti,egalax_ts";
-+		reg = <0x04>;
-+		interrupt-parent = <&gpio7>;
-+		interrupts = <12 2>; /* gpio7_12 active low */
-+		wakeup-gpios = <&gpio7 12 0>;
-+	};
-+
-+	videoin: adv7180@20 {
-+		compatible = "adi,adv7180";
-+		reg = <0x20>;
-+	};
-+};
-+
-+&iomuxc {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_hog>;
-+
-+	imx6qdl-gw52xx {
-+		pinctrl_hog: hoggrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
-+				MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
-+				MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
-+				MX6QDL_PAD_EIM_D31__GPIO3_IO31   0x80000000 /* VIDDEC_PDN# */
-+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
-+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
-+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+				MX6QDL_PAD_GPIO_0__CCM_CLKO1     0x000130b0 /* AUD4_MCK */
-+				MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x80000000 /* USB_SEL_PCI */
-+				MX6QDL_PAD_GPIO_17__GPIO7_IO12   0x80000000 /* TOUCH_IRQ# */
-+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
-+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
-+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x80000000 /* user3 led */
-+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11   0x80000000 /* LVDS_TCH# */
-+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00  0x80000000 /* SD3_CD# */
-+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11  0x80000000 /* UART2_EN# */
-+			 >;
-+		};
-+
-+		pinctrl_audmux: audmuxgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-+			>;
-+		};
-+
-+		pinctrl_enet: enetgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-+			>;
-+		};
-+
-+		pinctrl_gpmi_nand: gpminandgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-+			>;
-+		};
-+
-+		pinctrl_i2c1: i2c1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_i2c2: i2c2grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_i2c3: i2c3grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_pwm4: pwm4grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart1: uart1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart2: uart2grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart5: uart5grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_usbotg: usbotggrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-+			>;
-+		};
-+
-+		pinctrl_usdhc3: usdhc3grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-+			>;
-+		};
-+	};
-+};
-+
-+&ldb {
-+	status = "okay";
-+
-+	lvds-channel@0 {
-+		fsl,data-mapping = "spwg";
-+		fsl,data-width = <18>;
-+		status = "okay";
-+
-+		display-timings {
-+			native-mode = <&timing0>;
-+			timing0: hsd100pxn1 {
-+				clock-frequency = <65000000>;
-+				hactive = <1024>;
-+				vactive = <768>;
-+				hback-porch = <220>;
-+				hfront-porch = <40>;
-+				vback-porch = <21>;
-+				vfront-porch = <7>;
-+				hsync-len = <60>;
-+				vsync-len = <10>;
-+			};
-+		};
-+	};
-+};
-+
-+&pcie {
-+	reset-gpio = <&gpio1 29 0>;
-+	status = "okay";
-+};
-+
-+&pwm4 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_pwm4>;
-+	status = "okay";
-+};
-+
-+&ssi1 {
-+	fsl,mode = "i2s-slave";
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart1>;
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart2>;
-+	status = "okay";
-+};
-+
-+&uart5 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart5>;
-+	status = "okay";
-+};
-+
-+&usbotg {
-+	vbus-supply = <&reg_usb_otg_vbus>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usbotg>;
-+	disable-over-current;
-+	status = "okay";
-+};
-+
-+&usbh1 {
-+	status = "okay";
-+};
-+
-+&usdhc3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usdhc3>;
-+	cd-gpios = <&gpio7 0 0>;
-+	vmmc-supply = <&reg_3p3v>;
-+	status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-@@ -0,0 +1,573 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+	/* these are used by bootloader for disabling nodes */
-+	aliases {
-+		can0 = &can1;
-+		ethernet0 = &fec;
-+		ethernet1 = &eth1;
-+		led0 = &led0;
-+		led1 = &led1;
-+		led2 = &led2;
-+		nand = &gpmi;
-+		sky2 = &eth1;
-+		ssi0 = &ssi1;
-+		usb0 = &usbh1;
-+		usb1 = &usbotg;
-+		usdhc2 = &usdhc3;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttymxc1,115200";
-+	};
-+
-+	backlight {
-+		compatible = "pwm-backlight";
-+		pwms = <&pwm4 0 5000000>;
-+		brightness-levels = <0 4 8 16 32 64 128 255>;
-+		default-brightness-level = <7>;
-+		status = "okay";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led0: user1 {
-+			label = "user1";
-+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+			default-state = "on";
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		led1: user2 {
-+			label = "user2";
-+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+			default-state = "off";
-+		};
-+
-+		led2: user3 {
-+			label = "user3";
-+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+			default-state = "off";
-+		};
-+	};
-+
-+	memory {
-+		reg = <0x10000000 0x40000000>;
-+	};
-+
-+	pps {
-+		compatible = "pps-gpio";
-+		gpios = <&gpio1 26 0>;
-+		status = "okay";
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		reg_1p0v: regulator@0 {
-+			compatible = "regulator-fixed";
-+			reg = <0>;
-+			regulator-name = "1P0V";
-+			regulator-min-microvolt = <1000000>;
-+			regulator-max-microvolt = <1000000>;
-+			regulator-always-on;
-+		};
-+
-+		/* remove when pmic 1p8 regulator available */
-+		reg_1p8v: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "1P8V";
-+			regulator-min-microvolt = <1800000>;
-+			regulator-max-microvolt = <1800000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_3p3v: regulator@2 {
-+			compatible = "regulator-fixed";
-+			reg = <2>;
-+			regulator-name = "3P3V";
-+			regulator-min-microvolt = <3300000>;
-+			regulator-max-microvolt = <3300000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_usb_h1_vbus: regulator@3 {
-+			compatible = "regulator-fixed";
-+			reg = <3>;
-+			regulator-name = "usb_h1_vbus";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_usb_otg_vbus: regulator@4 {
-+			compatible = "regulator-fixed";
-+			reg = <4>;
-+			regulator-name = "usb_otg_vbus";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			gpio = <&gpio3 22 0>;
-+			enable-active-high;
-+		};
-+	};
-+
-+	sound {
-+		compatible = "fsl,imx6q-ventana-sgtl5000",
-+			     "fsl,imx-audio-sgtl5000";
-+		model = "sgtl5000-audio";
-+		ssi-controller = <&ssi1>;
-+		audio-codec = <&codec>;
-+		audio-routing =
-+			"MIC_IN", "Mic Jack",
-+			"Mic Jack", "Mic Bias",
-+			"Headphone Jack", "HP_OUT";
-+		mux-int-port = <1>;
-+		mux-ext-port = <4>;
-+	};
-+};
-+
-+&audmux {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_audmux>;
-+	status = "okay";
-+};
-+
-+&can1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_flexcan1>;
-+	status = "okay";
-+};
-+
-+&fec {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_enet>;
-+	phy-mode = "rgmii";
-+	phy-reset-gpios = <&gpio1 30 0>;
-+	status = "okay";
-+};
-+
-+&gpmi {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_gpmi_nand>;
-+	status = "okay";
-+};
-+
-+&i2c1 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c1>;
-+	status = "okay";
-+
-+	eeprom1: eeprom@50 {
-+		compatible = "atmel,24c02";
-+		reg = <0x50>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom2: eeprom@51 {
-+		compatible = "atmel,24c02";
-+		reg = <0x51>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom3: eeprom@52 {
-+		compatible = "atmel,24c02";
-+		reg = <0x52>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom4: eeprom@53 {
-+		compatible = "atmel,24c02";
-+		reg = <0x53>;
-+		pagesize = <16>;
-+	};
-+
-+	gpio: pca9555@23 {
-+		compatible = "nxp,pca9555";
-+		reg = <0x23>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+	};
-+
-+	hwmon: gsc@29 {
-+		compatible = "gw,gsp";
-+		reg = <0x29>;
-+	};
-+
-+	rtc: ds1672@68 {
-+		compatible = "dallas,ds1672";
-+		reg = <0x68>;
-+	};
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c2>;
-+	status = "okay";
-+
-+	pciclkgen: si53156@6b {
-+		compatible = "sil,si53156";
-+		reg = <0x6b>;
-+	};
-+
-+	pciswitch: pex8606@3f {
-+		compatible = "plx,pex8606";
-+		reg = <0x3f>;
-+	};
-+
-+	pmic: ltc3676@3c {
-+		compatible = "ltc,ltc3676";
-+		reg = <0x3c>;
-+
-+		regulators {
-+			/* VDD_SOC */
-+			sw1_reg: ltc3676__sw1 {
-+				regulator-min-microvolt = <1175000>;
-+				regulator-max-microvolt = <1175000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			/* VDD_1P8 */
-+			sw2_reg: ltc3676__sw2 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			/* VDD_ARM */
-+			sw3_reg: ltc3676__sw3 {
-+				regulator-min-microvolt = <1175000>;
-+				regulator-max-microvolt = <1175000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			/* VDD_DDR */
-+			sw4_reg: ltc3676__sw4 {
-+				regulator-min-microvolt = <1500000>;
-+				regulator-max-microvolt = <1500000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			/* VDD_2P5 */
-+			ldo2_reg: ltc3676__ldo2 {
-+				regulator-min-microvolt = <2500000>;
-+				regulator-max-microvolt = <2500000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			/* VDD_1P8 */
-+			ldo3_reg: ltc3676__ldo3 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			/* VDD_HIGH */
-+			ldo4_reg: ltc3676__ldo4 {
-+				regulator-min-microvolt = <3000000>;
-+				regulator-max-microvolt = <3000000>;
-+			};
-+		};
-+	};
-+};
-+
-+&i2c3 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c3>;
-+	status = "okay";
-+
-+	accelerometer: fxos8700@1e {
-+		compatible = "fsl,fxos8700";
-+		reg = <0x1e>;
-+	};
-+
-+	codec: sgtl5000@0a {
-+		compatible = "fsl,sgtl5000";
-+		reg = <0x0a>;
-+		clocks = <&clks 201>;
-+		VDDA-supply = <&reg_1p8v>;
-+		VDDIO-supply = <&reg_3p3v>;
-+	};
-+
-+	hdmiin: adv7611@4c {
-+		compatible = "adi,adv7611";
-+		reg = <0x4c>;
-+	};
-+
-+	touchscreen: egalax_ts@04 {
-+		compatible = "eeti,egalax_ts";
-+		reg = <0x04>;
-+		interrupt-parent = <&gpio1>;
-+		interrupts = <11 2>; /* gpio1_11 active low */
-+		wakeup-gpios = <&gpio1 11 0>;
-+	};
-+
-+	videoout: adv7393@2a {
-+		compatible = "adi,adv7393";
-+		reg = <0x2a>;
-+	};
-+
-+	videoin: adv7180@20 {
-+		compatible = "adi,adv7180";
-+		reg = <0x20>;
-+	};
-+};
-+
-+&iomuxc {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_hog>;
-+
-+	imx6qdl-gw53xx {
-+		pinctrl_hog: hoggrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_A19__GPIO2_IO19    0x80000000 /* PCIE6EXP_DIO0 */
-+				MX6QDL_PAD_EIM_A20__GPIO2_IO18    0x80000000 /* PCIE6EXP_DIO1 */
-+				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
-+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27  0x80000000 /* GPS_SHDN */
-+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26  0x80000000 /* GPS_PPS */
-+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
-+				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
-+				MX6QDL_PAD_GPIO_2__GPIO1_IO02     0x80000000 /* CAN_STBY */
-+				MX6QDL_PAD_GPIO_8__GPIO1_IO08     0x80000000 /* PMIC_IRQ# */
-+				MX6QDL_PAD_GPIO_9__GPIO1_IO09     0x80000000 /* HUB_RST# */
-+				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* PCIE_WDIS# */
-+				MX6QDL_PAD_GPIO_19__GPIO4_IO05    0x80000000 /* ACCEL_IRQ# */
-+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
-+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14   0x80000000 /* USBOTG_OC# */
-+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x80000000 /* user2 led */
-+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
-+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11    0x80000000 /* TOUCH_IRQ# */
-+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00   0x80000000 /* SD3_DET# */
-+			 >;
-+		};
-+
-+		pinctrl_audmux: audmuxgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-+			>;
-+		};
-+
-+		pinctrl_enet: enetgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-+			>;
-+		};
-+
-+		pinctrl_flexcan1: flexcan1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x80000000
-+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x80000000
-+			>;
-+		};
-+
-+		pinctrl_gpmi_nand: gpminandgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-+			>;
-+		};
-+
-+		pinctrl_i2c1: i2c1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_i2c2: i2c2grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_i2c3: i2c3grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_pwm4: pwm4grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart1: uart1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart2: uart2grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart5: uart5grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_usbotg: usbotggrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-+			>;
-+		};
-+
-+		pinctrl_usdhc3: usdhc3grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-+			>;
-+		};
-+	};
-+};
-+
-+&ldb {
-+	status = "okay";
-+
-+	lvds-channel@0 {
-+		fsl,data-mapping = "spwg";
-+		fsl,data-width = <18>;
-+		status = "okay";
-+
-+		display-timings {
-+			native-mode = <&timing0>;
-+			timing0: hsd100pxn1 {
-+				clock-frequency = <65000000>;
-+				hactive = <1024>;
-+				vactive = <768>;
-+				hback-porch = <220>;
-+				hfront-porch = <40>;
-+				vback-porch = <21>;
-+				vfront-porch = <7>;
-+				hsync-len = <60>;
-+				vsync-len = <10>;
-+			};
-+		};
-+	};
-+};
-+
-+&pcie {
-+	reset-gpio = <&gpio1 29 0>;
-+	status = "okay";
-+
-+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+		compatible = "marvell,sky2";
-+	};
-+};
-+
-+&pwm4 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_pwm4>;
-+	status = "okay";
-+};
-+
-+&ssi1 {
-+	fsl,mode = "i2s-slave";
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart1>;
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart2>;
-+	status = "okay";
-+};
-+
-+&uart5 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart5>;
-+	status = "okay";
-+};
-+
-+&usbotg {
-+	vbus-supply = <&reg_usb_otg_vbus>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usbotg>;
-+	disable-over-current;
-+	status = "okay";
-+};
-+
-+&usbh1 {
-+	vbus-supply = <&reg_usb_h1_vbus>;
-+	status = "okay";
-+};
-+
-+&usdhc3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usdhc3>;
-+	cd-gpios = <&gpio7 0 0>;
-+	vmmc-supply = <&reg_3p3v>;
-+	status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-@@ -0,0 +1,600 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+	/* these are used by bootloader for disabling nodes */
-+	aliases {
-+		can0 = &can1;
-+		ethernet0 = &fec;
-+		ethernet1 = &eth1;
-+		led0 = &led0;
-+		led1 = &led1;
-+		led2 = &led2;
-+		nand = &gpmi;
-+		sky2 = &eth1;
-+		ssi0 = &ssi1;
-+		usb0 = &usbh1;
-+		usb1 = &usbotg;
-+		usdhc2 = &usdhc3;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttymxc1,115200";
-+	};
-+
-+	backlight {
-+		compatible = "pwm-backlight";
-+		pwms = <&pwm4 0 5000000>;
-+		brightness-levels = <0 4 8 16 32 64 128 255>;
-+		default-brightness-level = <7>;
-+		status = "okay";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led0: user1 {
-+			label = "user1";
-+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+			default-state = "on";
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		led1: user2 {
-+			label = "user2";
-+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+			default-state = "off";
-+		};
-+
-+		led2: user3 {
-+			label = "user3";
-+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+			default-state = "off";
-+		};
-+	};
-+
-+	memory {
-+		reg = <0x10000000 0x40000000>;
-+	};
-+
-+	pps {
-+		compatible = "pps-gpio";
-+		gpios = <&gpio1 26 0>;
-+		status = "okay";
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		reg_1p0v: regulator@0 {
-+			compatible = "regulator-fixed";
-+			reg = <0>;
-+			regulator-name = "1P0V";
-+			regulator-min-microvolt = <1000000>;
-+			regulator-max-microvolt = <1000000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_3p3v: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "3P3V";
-+			regulator-min-microvolt = <3300000>;
-+			regulator-max-microvolt = <3300000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_usb_h1_vbus: regulator@2 {
-+			compatible = "regulator-fixed";
-+			reg = <2>;
-+			regulator-name = "usb_h1_vbus";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_usb_otg_vbus: regulator@3 {
-+			compatible = "regulator-fixed";
-+			reg = <3>;
-+			regulator-name = "usb_otg_vbus";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			gpio = <&gpio3 22 0>;
-+			enable-active-high;
-+		};
-+	};
-+
-+	sound {
-+		compatible = "fsl,imx6q-ventana-sgtl5000",
-+			     "fsl,imx-audio-sgtl5000";
-+		model = "sgtl5000-audio";
-+		ssi-controller = <&ssi1>;
-+		audio-codec = <&codec>;
-+		audio-routing =
-+			"MIC_IN", "Mic Jack",
-+			"Mic Jack", "Mic Bias",
-+			"Headphone Jack", "HP_OUT";
-+		mux-int-port = <1>;
-+		mux-ext-port = <4>;
-+	};
-+};
-+
-+&audmux {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
-+	status = "okay";
-+};
-+
-+&can1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_flexcan1>;
-+	status = "okay";
-+};
-+
-+&fec {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_enet>;
-+	phy-mode = "rgmii";
-+	phy-reset-gpios = <&gpio1 30 0>;
-+	status = "okay";
-+};
-+
-+&gpmi {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_gpmi_nand>;
-+	status = "okay";
-+};
-+
-+&i2c1 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c1>;
-+	status = "okay";
-+
-+	eeprom1: eeprom@50 {
-+		compatible = "atmel,24c02";
-+		reg = <0x50>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom2: eeprom@51 {
-+		compatible = "atmel,24c02";
-+		reg = <0x51>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom3: eeprom@52 {
-+		compatible = "atmel,24c02";
-+		reg = <0x52>;
-+		pagesize = <16>;
-+	};
-+
-+	eeprom4: eeprom@53 {
-+		compatible = "atmel,24c02";
-+		reg = <0x53>;
-+		pagesize = <16>;
-+	};
-+
-+	gpio: pca9555@23 {
-+		compatible = "nxp,pca9555";
-+		reg = <0x23>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+	};
-+
-+	hwmon: gsc@29 {
-+		compatible = "gw,gsp";
-+		reg = <0x29>;
-+	};
-+
-+	rtc: ds1672@68 {
-+		compatible = "dallas,ds1672";
-+		reg = <0x68>;
-+	};
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c2>;
-+	status = "okay";
-+
-+	pmic: pfuze100@08 {
-+		compatible = "fsl,pfuze100";
-+		reg = <0x08>;
-+
-+		regulators {
-+			sw1a_reg: sw1ab {
-+				regulator-min-microvolt = <300000>;
-+				regulator-max-microvolt = <1875000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+				regulator-ramp-delay = <6250>;
-+			};
-+
-+			sw1c_reg: sw1c {
-+				regulator-min-microvolt = <300000>;
-+				regulator-max-microvolt = <1875000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+				regulator-ramp-delay = <6250>;
-+			};
-+
-+			sw2_reg: sw2 {
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <3950000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw3a_reg: sw3a {
-+				regulator-min-microvolt = <400000>;
-+				regulator-max-microvolt = <1975000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw3b_reg: sw3b {
-+				regulator-min-microvolt = <400000>;
-+				regulator-max-microvolt = <1975000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw4_reg: sw4 {
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <3300000>;
-+			};
-+
-+			swbst_reg: swbst {
-+				regulator-min-microvolt = <5000000>;
-+				regulator-max-microvolt = <5150000>;
-+			};
-+
-+			snvs_reg: vsnvs {
-+				regulator-min-microvolt = <1000000>;
-+				regulator-max-microvolt = <3000000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			vref_reg: vrefddr {
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			vgen1_reg: vgen1 {
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <1550000>;
-+			};
-+
-+			vgen2_reg: vgen2 {
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <1550000>;
-+			};
-+
-+			vgen3_reg: vgen3 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+			};
-+
-+			vgen4_reg: vgen4 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen5_reg: vgen5 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen6_reg: vgen6 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+		};
-+	};
-+
-+	pciswitch: pex8609@3f {
-+		compatible = "plx,pex8609";
-+		reg = <0x3f>;
-+	};
-+
-+	pciclkgen: si52147@6b {
-+		compatible = "sil,si52147";
-+		reg = <0x6b>;
-+	};
-+};
-+
-+&i2c3 {
-+	clock-frequency = <100000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c3>;
-+	status = "okay";
-+
-+	accelerometer: fxos8700@1e {
-+		compatible = "fsl,fxos8700";
-+		reg = <0x1e>;
-+	};
-+
-+	codec: sgtl5000@0a {
-+		compatible = "fsl,sgtl5000";
-+		reg = <0x0a>;
-+		clocks = <&clks 201>;
-+		VDDA-supply = <&sw4_reg>;
-+		VDDIO-supply = <&reg_3p3v>;
-+	};
-+
-+	hdmiin: adv7611@4c {
-+		compatible = "adi,adv7611";
-+		reg = <0x4c>;
-+	};
-+
-+	touchscreen: egalax_ts@04 {
-+		compatible = "eeti,egalax_ts";
-+		reg = <0x04>;
-+		interrupt-parent = <&gpio7>;
-+		interrupts = <12 2>; /* gpio7_12 active low */
-+		wakeup-gpios = <&gpio7 12 0>;
-+	};
-+
-+	videoout: adv7393@2a {
-+		compatible = "adi,adv7393";
-+		reg = <0x2a>;
-+	};
-+
-+	videoin: adv7180@20 {
-+		compatible = "adi,adv7180";
-+		reg = <0x20>;
-+	};
-+};
-+
-+&iomuxc {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_hog>;
-+
-+	imx6qdl-gw54xx {
-+		pinctrl_hog: hoggrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
-+				MX6QDL_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
-+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26  0x80000000 /* GPS_PPS */
-+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
-+				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
-+				MX6QDL_PAD_GPIO_2__GPIO1_IO02     0x80000000 /* CAN_STBY */
-+				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
-+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
-+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x80000000 /* user2 led */
-+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
-+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
-+				MX6QDL_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
-+			 >;
-+		};
-+
-+		pinctrl_audmux: audmuxgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-+			>;
-+		};
-+
-+		pinctrl_enet: enetgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-+			>;
-+		};
-+
-+		pinctrl_flexcan1: flexcan1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x80000000
-+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x80000000
-+			>;
-+		};
-+
-+		pinctrl_gpmi_nand: gpminandgrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-+			>;
-+		};
-+
-+		pinctrl_i2c1: i2c1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_i2c2: i2c2grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_i2c3: i2c3grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-+			>;
-+		};
-+
-+		pinctrl_pwm4: pwm4grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart1: uart1grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart2: uart2grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_uart5: uart5grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-+			>;
-+		};
-+
-+		pinctrl_usbotg: usbotggrp {
-+			fsl,pins = <
-+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-+			>;
-+		};
-+
-+		pinctrl_usdhc3: usdhc3grp {
-+			fsl,pins = <
-+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-+			>;
-+		};
-+	};
-+};
-+
-+&ldb {
-+	status = "okay";
-+
-+	lvds-channel@0 {
-+		fsl,data-mapping = "spwg";
-+		fsl,data-width = <18>;
-+		status = "okay";
-+
-+		display-timings {
-+			native-mode = <&timing0>;
-+			timing0: hsd100pxn1 {
-+				clock-frequency = <65000000>;
-+				hactive = <1024>;
-+				vactive = <768>;
-+				hback-porch = <220>;
-+				hfront-porch = <40>;
-+				vback-porch = <21>;
-+				vfront-porch = <7>;
-+				hsync-len = <60>;
-+				vsync-len = <10>;
-+			};
-+		};
-+	};
-+};
-+
-+&pcie {
-+	reset-gpio = <&gpio1 29 0>;
-+	status = "okay";
-+
-+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+		compatible = "marvell,sky2";
-+	};
-+};
-+
-+&pwm4 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_pwm4>;
-+	status = "okay";
-+};
-+
-+&ssi1 {
-+	fsl,mode = "i2s-slave";
-+	status = "okay";
-+};
-+
-+&ssi2 {
-+	fsl,mode = "i2s-slave";
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart1>;
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart2>;
-+	status = "okay";
-+};
-+
-+&uart5 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart5>;
-+	status = "okay";
-+};
-+
-+&usbotg {
-+	vbus-supply = <&reg_usb_otg_vbus>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usbotg>;
-+	disable-over-current;
-+	status = "okay";
-+};
-+
-+&usbh1 {
-+	vbus-supply = <&reg_usb_h1_vbus>;
-+	status = "okay";
-+};
-+
-+&usdhc3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usdhc3>;
-+	cd-gpios = <&gpio7 0 0>;
-+	vmmc-supply = <&reg_3p3v>;
-+	status = "okay";
-+};
diff --git a/target/linux/imx6/patches-3.14/0004-ARM-dts-imx6dl-enable-cpufreq-support.patch b/target/linux/imx6/patches-3.14/0004-ARM-dts-imx6dl-enable-cpufreq-support.patch
deleted file mode 100644
index 6f07cdd..0000000
--- a/target/linux/imx6/patches-3.14/0004-ARM-dts-imx6dl-enable-cpufreq-support.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 978ed904c17cd39700a5e1f95ee29ef4fee08ce9 Mon Sep 17 00:00:00 2001
-From: Anson Huang <b20788@freescale.com>
-Date: Thu, 19 Dec 2013 10:02:10 -0500
-Subject: [PATCH] ARM: dts: imx6dl: enable cpufreq support
-
-This patch adds cpufreq dts for i.mx6dl to support cpufreq driver.
-
-Signed-off-by: Anson Huang <b20788@freescale.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6dl.dtsi | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/arch/arm/boot/dts/imx6dl.dtsi
-+++ b/arch/arm/boot/dts/imx6dl.dtsi
-@@ -21,6 +21,26 @@
- 			device_type = "cpu";
- 			reg = <0>;
- 			next-level-cache = <&L2>;
-+			operating-points = <
-+				/* kHz    uV */
-+				996000  1275000
-+				792000  1175000
-+				396000  1075000
-+			>;
-+			fsl,soc-operating-points = <
-+				/* ARM kHz  SOC-PU uV */
-+				996000	1175000
-+				792000	1175000
-+				396000	1175000
-+			>;
-+			clock-latency = <61036>; /* two CLK32 periods */
-+			clocks = <&clks 104>, <&clks 6>, <&clks 16>,
-+				 <&clks 17>, <&clks 170>;
-+			clock-names = "arm", "pll2_pfd2_396m", "step",
-+				      "pll1_sw", "pll1_sys";
-+			arm-supply = <&reg_arm>;
-+			pu-supply = <&reg_pu>;
-+			soc-supply = <&reg_soc>;
- 		};
- 
- 		cpu@1 {
diff --git a/target/linux/imx6/patches-3.14/0005-PCI-designware-Use-new-OF-interrupt-mapping-when-pos.patch b/target/linux/imx6/patches-3.14/0005-PCI-designware-Use-new-OF-interrupt-mapping-when-pos.patch
deleted file mode 100644
index 19db404..0000000
--- a/target/linux/imx6/patches-3.14/0005-PCI-designware-Use-new-OF-interrupt-mapping-when-pos.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 804f57b1a63c7435fe43b36942581cc6c79ebb5c Mon Sep 17 00:00:00 2001
-From: Lucas Stach <l.stach@pengutronix.de>
-Date: Wed, 5 Mar 2014 14:25:51 +0100
-Subject: [PATCH] PCI: designware: Use new OF interrupt mapping when possible
-
-Use new OF interrupt mapping (of_irq_parse_and_map_pci()) when possible.
-This is the recommended method of doing the IRQ mapping.  For old
-devicetrees we fall back to the previous practice.
-
-This makes INTB, INTC, and INTD work on i.MX.
-
-Tested-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Marek Vasut <marex@denx.de>
-Acked-by: Arnd Bergmann <arnd@arndb.de>
-Acked-by: Jingoo Han <jg1.han@samsung.com>
----
- drivers/pci/host/pcie-designware.c | 12 +++++++++---
- 1 file changed, 9 insertions(+), 3 deletions(-)
-
---- a/drivers/pci/host/pcie-designware.c
-+++ b/drivers/pci/host/pcie-designware.c
-@@ -17,6 +17,7 @@
- #include <linux/module.h>
- #include <linux/msi.h>
- #include <linux/of_address.h>
-+#include <linux/of_pci.h>
- #include <linux/pci.h>
- #include <linux/pci_regs.h>
- #include <linux/types.h>
-@@ -492,7 +493,7 @@ int __init dw_pcie_host_init(struct pcie
- 	dw_pci.nr_controllers = 1;
- 	dw_pci.private_data = (void **)&pp;
- 
--	pci_common_init(&dw_pci);
-+	pci_common_init_dev(pp->dev, &dw_pci);
- 	pci_assign_unassigned_resources();
- #ifdef CONFIG_PCI_DOMAINS
- 	dw_pci.domain++;
-@@ -725,7 +726,7 @@ static struct pci_bus *dw_pcie_scan_bus(
- 
- 	if (pp) {
- 		pp->root_bus_nr = sys->busnr;
--		bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
-+		bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops,
- 					sys, &sys->resources);
- 	} else {
- 		bus = NULL;
-@@ -738,8 +739,13 @@ static struct pci_bus *dw_pcie_scan_bus(
- static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
- {
- 	struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
-+	int irq;
- 
--	return pp->irq;
-+	irq = of_irq_parse_and_map_pci(dev, slot, pin);
-+	if (!irq)
-+		irq = pp->irq;
-+
-+	return irq;
- }
- 
- static void dw_pcie_add_bus(struct pci_bus *bus)
diff --git a/target/linux/imx6/patches-3.14/0006-ARM-dts-imx6-add-PCIe-interrupt-mapping-properties.patch b/target/linux/imx6/patches-3.14/0006-ARM-dts-imx6-add-PCIe-interrupt-mapping-properties.patch
deleted file mode 100644
index ade85fc..0000000
--- a/target/linux/imx6/patches-3.14/0006-ARM-dts-imx6-add-PCIe-interrupt-mapping-properties.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 07134a365f1c4be6e840a00ae452d1593f15c5fc Mon Sep 17 00:00:00 2001
-From: Lucas Stach <l.stach@pengutronix.de>
-Date: Wed, 5 Mar 2014 14:25:50 +0100
-Subject: [PATCH] ARM: dts: imx6: add PCIe interrupt mapping properties
-
-As defined by the common PCI bindings.
-
-Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-Acked-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -10,6 +10,8 @@
-  * http://www.gnu.org/copyleft/gpl.html
-  */
- 
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
- #include "skeleton.dtsi"
- 
- / {
-@@ -127,6 +129,12 @@
- 				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
- 			num-lanes = <1>;
- 			interrupts = <0 123 0x04>;
-+			#interrupt-cells = <1>;
-+			interrupt-map-mask = <0 0 0 0x7>;
-+			interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-+			                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-+			                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-+			                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
- 			clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
- 			status = "disabled";
diff --git a/target/linux/imx6/patches-3.14/0007-ARM-dts-imx-drop-invalid-size-and-address-cells-prop.patch b/target/linux/imx6/patches-3.14/0007-ARM-dts-imx-drop-invalid-size-and-address-cells-prop.patch
deleted file mode 100644
index 075e4a9..0000000
--- a/target/linux/imx6/patches-3.14/0007-ARM-dts-imx-drop-invalid-size-and-address-cells-prop.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 54e8eaeec1227a024373e37315770cc79d69917b Mon Sep 17 00:00:00 2001
-From: Lucas Stach <l.stach@pengutronix.de>
-Date: Fri, 28 Mar 2014 17:25:51 +0100
-Subject: [PATCH] ARM: dts: imx: drop invalid size and address cells properties
-
-Those two properties should have been set to zero, which
-is the same as not specifying them.
-
-Having address-cells set to 1 causes OF interrupt
-mapping routines to add 1 to the interrupt-cells
-property and as result fail because all calculations
-are off by one.
-
-Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 2 --
- arch/arm/boot/dts/imx6sl.dtsi  | 2 --
- 2 files changed, 4 deletions(-)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -40,8 +40,6 @@
- 	intc: interrupt-controller@00a01000 {
- 		compatible = "arm,cortex-a9-gic";
- 		#interrupt-cells = <3>;
--		#address-cells = <1>;
--		#size-cells = <1>;
- 		interrupt-controller;
- 		reg = <0x00a01000 0x1000>,
- 		      <0x00a00100 0x100>;
---- a/arch/arm/boot/dts/imx6sl.dtsi
-+++ b/arch/arm/boot/dts/imx6sl.dtsi
-@@ -44,8 +44,6 @@
- 	intc: interrupt-controller@00a01000 {
- 		compatible = "arm,cortex-a9-gic";
- 		#interrupt-cells = <3>;
--		#address-cells = <1>;
--		#size-cells = <1>;
- 		interrupt-controller;
- 		reg = <0x00a01000 0x1000>,
- 		      <0x00a00100 0x100>;
diff --git a/target/linux/imx6/patches-3.14/0008-ARM-imx-add-speed-grading-check-for-i.mx6-soc.patch b/target/linux/imx6/patches-3.14/0008-ARM-imx-add-speed-grading-check-for-i.mx6-soc.patch
deleted file mode 100644
index 70b7014..0000000
--- a/target/linux/imx6/patches-3.14/0008-ARM-imx-add-speed-grading-check-for-i.mx6-soc.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From c962a0996335fae7f79e64677f47d4784b86f692 Mon Sep 17 00:00:00 2001
-From: Anson Huang <b20788@freescale.com>
-Date: Wed, 12 Feb 2014 17:57:03 +0800
-Subject: [PATCH] ARM: imx: add speed grading check for i.mx6 soc
-
-The fuse map of speed_grading[1:0] defines the max speed
-of ARM, see below the definition:
-
-2b'11: 1200000000Hz;
-2b'10: 996000000Hz;
-2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
-2b'00: 792000000Hz;
-
-Need to remove all illegal setpoints according to fuse
-map.
-
-Signed-off-by: Anson Huang <b20788@freescale.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/mach-imx/mach-imx6q.c | 26 +++++++++++++++++++++++---
- 1 file changed, 23 insertions(+), 3 deletions(-)
-
---- a/arch/arm/mach-imx/mach-imx6q.c
-+++ b/arch/arm/mach-imx/mach-imx6q.c
-@@ -219,8 +219,10 @@ static void __init imx6q_init_machine(vo
- #define OCOTP_CFG3			0x440
- #define OCOTP_CFG3_SPEED_SHIFT		16
- #define OCOTP_CFG3_SPEED_1P2GHZ		0x3
-+#define OCOTP_CFG3_SPEED_996MHZ		0x2
-+#define OCOTP_CFG3_SPEED_852MHZ		0x1
- 
--static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
-+static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev)
- {
- 	struct device_node *np;
- 	void __iomem *base;
-@@ -238,11 +240,29 @@ static void __init imx6q_opp_check_1p2gh
- 		goto put_node;
- 	}
- 
-+	/*
-+	 * SPEED_GRADING[1:0] defines the max speed of ARM:
-+	 * 2b'11: 1200000000Hz;
-+	 * 2b'10: 996000000Hz;
-+	 * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
-+	 * 2b'00: 792000000Hz;
-+	 * We need to set the max speed of ARM according to fuse map.
-+	 */
- 	val = readl_relaxed(base + OCOTP_CFG3);
- 	val >>= OCOTP_CFG3_SPEED_SHIFT;
--	if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
-+	val &= 0x3;
-+
-+	if (val != OCOTP_CFG3_SPEED_1P2GHZ)
- 		if (dev_pm_opp_disable(cpu_dev, 1200000000))
- 			pr_warn("failed to disable 1.2 GHz OPP\n");
-+	if (val < OCOTP_CFG3_SPEED_996MHZ)
-+		if (dev_pm_opp_disable(cpu_dev, 996000000))
-+			pr_warn("failed to disable 996 MHz OPP\n");
-+	if (cpu_is_imx6q()) {
-+		if (val != OCOTP_CFG3_SPEED_852MHZ)
-+			if (dev_pm_opp_disable(cpu_dev, 852000000))
-+				pr_warn("failed to disable 852 MHz OPP\n");
-+	}
- 
- put_node:
- 	of_node_put(np);
-@@ -268,7 +288,7 @@ static void __init imx6q_opp_init(void)
- 		goto put_node;
- 	}
- 
--	imx6q_opp_check_1p2ghz(cpu_dev);
-+	imx6q_opp_check_speed_grading(cpu_dev);
- 
- put_node:
- 	of_node_put(np);
diff --git a/target/linux/imx6/patches-3.14/0050-sky2-allow-mac-to-come-from-dt.patch b/target/linux/imx6/patches-3.14/0050-sky2-allow-mac-to-come-from-dt.patch
deleted file mode 100644
index bab418b..0000000
--- a/target/linux/imx6/patches-3.14/0050-sky2-allow-mac-to-come-from-dt.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: [PATCH] sky2: allow mac to come from dt
-
-The driver reads the mac address from the device registers which would
-need to have been programmed by the bootloader.  This patch adds
-the ability to pull the mac from devicetree via the aliases/sky2 node.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/net/ethernet/marvell/sky2.c | 33 ++++++++++++++++++++++++++++++++-
- 1 file changed, 32 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/marvell/sky2.c
-+++ b/drivers/net/ethernet/marvell/sky2.c
-@@ -44,6 +44,8 @@
- #include <linux/prefetch.h>
- #include <linux/debugfs.h>
- #include <linux/mii.h>
-+#include <linux/of_device.h>
-+#include <linux/of_net.h>
- 
- #include <asm/irq.h>
- 
-@@ -4748,6 +4750,7 @@ static struct net_device *sky2_init_netd
- {
- 	struct sky2_port *sky2;
- 	struct net_device *dev = alloc_etherdev(sizeof(*sky2));
-+	unsigned char *iap, tmpaddr[ETH_ALEN];
- 
- 	if (!dev)
- 		return NULL;
-@@ -4805,8 +4808,36 @@ static struct net_device *sky2_init_netd
- 
- 	dev->features |= dev->hw_features;
- 
-+	/*
-+	 * try to get mac address in the following order:
-+	 * 1) from device tree data
-+	 * 2) from internal registers set by bootloader
-+	 */
-+	iap = NULL;
-+	if (IS_ENABLED(CONFIG_OF)) {
-+		struct device_node *np;
-+		np = of_find_node_by_path("/aliases");
-+		if (np) {
-+			const char *path = of_get_property(np, "sky2", NULL);
-+			if (path)
-+				np = of_find_node_by_path(path);
-+			if (np)
-+				path = of_get_mac_address(np);
-+			if (path)
-+				iap = (unsigned char *) path;
-+		}
-+	}
-+
-+	/*
-+	 * 2) mac registers set by bootloader
-+	 */
-+	if (!iap || !is_valid_ether_addr(iap)) {
-+		memcpy_fromio(&tmpaddr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
-+		iap = &tmpaddr[0];
-+	}
-+
- 	/* read the mac address */
--	memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
-+	memcpy(dev->dev_addr, iap, ETH_ALEN);
- 
- 	return dev;
- }
diff --git a/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch b/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch
deleted file mode 100644
index bae5a1f..0000000
--- a/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-This fixes a boot hang observed when the bootloader
-already enabled the PCIe link for it's own use. The
-fundamental problem is that Freescale forgot to wire
-up the core reset, so software doesn't have a sane way
-to get the core into a defined state.
-
-According to the DW PCIe core reference manual configuration
-of the core may only happen when the LTSSM is disabled, so
-this is one of the first things we need to do. Apparently
-this isn't safe to do when the LTSSM is in any other state
-than "detect" as we observe an instant machine hang when
-trying to do so while the link is already up.
-
-As a workaround force LTSSM into detect state right before
-hitting the disable switch.
-
-Reported-by: Fabio Estevam <fabio.estevam <at> freescale.com>
-Signed-off-by: Lucas Stach <l.stach <at> pengutronix.de>
-Acked-by: Tim Harvey <tharvey <at> gateworks.com>
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -52,6 +52,9 @@ struct imx6_pcie {
- 
- /* PCIe Port Logic registers (memory-mapped) */
- #define PL_OFFSET 0x700
-+#define PCIE_PL_PFLR (PL_OFFSET + 0x08)
-+#define PCIE_PL_PFLR_LINK_STATE_MASK		(0x3f << 16)
-+#define PCIE_PL_PFLR_FORCE_LINK			(1 << 15)
- #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
- #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
- #define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING	(1 << 29)
-@@ -217,6 +220,31 @@ static int imx6q_pcie_abort_handler(unsi
- static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
- {
- 	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
-+	u32 val, gpr1, gpr12;
-+
-+	/*
-+	 * If the bootloader already enabled the link we need some special
-+	 * handling to get the core back into a state where it is safe to
-+	 * touch it for configuration. As there is no dedicated reset signal
-+	 * wired up for MX6QDL, we need to manually force LTSSM into "detect"
-+	 * state before completely disabling LTSSM, which is a prerequisite
-+	 * for core configuration.
-+	 * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong
-+	 * indication that the bootloader activated the link.
-+	 */
-+	regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1);
-+	regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12);
-+
-+	if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) &&
-+	    (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) {
-+		val = readl(pp->dbi_base + PCIE_PL_PFLR);
-+		val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
-+		val |= PCIE_PL_PFLR_FORCE_LINK;
-+		writel(val, pp->dbi_base + PCIE_PL_PFLR);
-+
-+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+				IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
-+	}
- 
- 	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
- 			IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
-@@ -627,6 +655,14 @@ static int __init imx6_pcie_probe(struct
- 	return 0;
- }
- 
-+static void imx6_pcie_shutdown(struct platform_device *pdev)
-+{
-+	struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev);
-+
-+	/* bring down link, so bootloader gets clean state in case of reboot */
-+	imx6_pcie_assert_core_reset(&imx6_pcie->pp);
-+}
-+
- static const struct of_device_id imx6_pcie_of_match[] = {
- 	{ .compatible = "fsl,imx6q-pcie", },
- 	{},
-@@ -639,6 +675,7 @@ static struct platform_driver imx6_pcie_
- 		.owner	= THIS_MODULE,
- 		.of_match_table = imx6_pcie_of_match,
- 	},
-+	.shutdown = imx6_pcie_shutdown,
- };
- 
- /* Freescale PCIe driver does not allow module unload */
diff --git a/target/linux/imx6/patches-3.14/0060-pci_imx6_fix-link-failure.patch b/target/linux/imx6/patches-3.14/0060-pci_imx6_fix-link-failure.patch
deleted file mode 100644
index e416d83..0000000
--- a/target/linux/imx6/patches-3.14/0060-pci_imx6_fix-link-failure.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-PCI: imx6: fix occasional link failure
-
-According to the IMX6 reference manuals, REF_SSP_EN (Reference clock enable
-for SS function) must remain deasserted until the reference clock is running
-at the appropriate frequency.
-
-Without this patch we find a high link failure rate (>5%) on certain
-IMX6 boards at various temperatures.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -262,11 +262,6 @@ static int imx6_pcie_deassert_core_reset
- 	if (gpio_is_valid(imx6_pcie->power_on_gpio))
- 		gpio_set_value(imx6_pcie->power_on_gpio, 1);
- 
--	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
--			IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
--	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
--			IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
--
- 	ret = clk_prepare_enable(imx6_pcie->sata_ref_100m);
- 	if (ret) {
- 		dev_err(pp->dev, "unable to enable sata_ref_100m\n");
-@@ -294,6 +289,12 @@ static int imx6_pcie_deassert_core_reset
- 	/* allow the clocks to stabilize */
- 	usleep_range(200, 500);
- 
-+	/* power up core phy and enable ref clock */
-+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+			IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
-+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+			IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
-+
- 	/* Some boards don't have PCIe reset GPIO. */
- 	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
- 		gpio_set_value(imx6_pcie->reset_gpio, 0);
diff --git a/target/linux/imx6/patches-3.14/100-bootargs.patch b/target/linux/imx6/patches-3.14/100-bootargs.patch
deleted file mode 100644
index 0954391..0000000
--- a/target/linux/imx6/patches-3.14/100-bootargs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/imx6dl-wandboard.dts
-+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
-@@ -19,4 +19,8 @@
- 	memory {
- 		reg = <0x10000000 0x40000000>;
- 	};
-+
-+	chosen {
-+		bootargs = "console=ttymxc0,115200";
-+	};
- };
diff --git a/target/linux/imx6/patches-3.14/200-pci_designware_add-ability-for-custom-swizzle.patch b/target/linux/imx6/patches-3.14/200-pci_designware_add-ability-for-custom-swizzle.patch
deleted file mode 100644
index b174376..0000000
--- a/target/linux/imx6/patches-3.14/200-pci_designware_add-ability-for-custom-swizzle.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-commit e84634dc6c7f3f6af9b8ef1fb36f0d85c476ab95
-Author: Tim Harvey <tharvey@gateworks.com>
-Date:   Thu Feb 27 01:02:23 2014 -0800
-
-    PCI: designware: add ability for custom swizzle
-    
-    Add the ability for a platform driver to provide a platform-specific
-    swizzle function.
-    
-    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/pci/host/pcie-designware.c
-+++ b/drivers/pci/host/pcie-designware.c
-@@ -481,6 +481,9 @@ int __init dw_pcie_host_init(struct pcie
- 	if (pp->ops->host_init)
- 		pp->ops->host_init(pp);
- 
-+	if (pp->swizzle)
-+		dw_pci.swizzle = pp->swizzle;
-+
- 	dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
- 
- 	/* program correct class for RC */
---- a/drivers/pci/host/pcie-designware.h
-+++ b/drivers/pci/host/pcie-designware.h
-@@ -53,6 +53,7 @@ struct pcie_port {
- 	struct irq_domain	*irq_domain;
- 	unsigned long		msi_data;
- 	DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
-+	u8			(*swizzle)(struct pci_dev *, u8 *);
- };
- 
- struct pcie_host_ops {
diff --git a/target/linux/imx6/patches-3.14/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch b/target/linux/imx6/patches-3.14/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch
deleted file mode 100644
index c8e2a0e..0000000
--- a/target/linux/imx6/patches-3.14/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-commit 2c0d0491438433a1f327f2e754c7b6b55fec51c4
-Author: Tim Harvey <tharvey@gateworks.com>
-Date:   Thu Feb 27 00:59:53 2014 -0800
-
-    PCI: imx6: ventana: fixup for IRQ mismapping
-    
-    The TI XIO2001 PCIe-to-PCI bridge used on several Ventana expansion boards
-    has its slot-to-bridge IRQ mapping reversed from the PCI specification:
-    
-      INTA->INTD
-      INTB->INTC
-      INTC->INTB
-      INTD->INTA
-    
-    Implement a custom swizzle function that does a fixup on the interrupt for
-    devices on a TI XIO2001 bridge.
-    
-    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -540,6 +540,39 @@ static int imx6_add_pcie_port(struct pci
- 	return 0;
- }
- 
-+/* TI XIO2001 PCIe-to-PCI bridge on GW16082 exp card has IRQs reversed */
-+u8 ventana_swizzle(struct pci_dev *dev, u8 *pin)
-+{
-+	u8 i = 0;
-+	struct pci_dev *pdev = dev;
-+
-+	/* count number of TI XIO2001 bridges on bus */
-+	while (!pci_is_root_bus(pdev->bus)) {
-+		if (pdev->bus && pdev->bus->self &&
-+		    (pdev->bus->self->vendor == PCI_VENDOR_ID_TI) &&
-+		    (pdev->bus->self->device == PCI_DEVICE_ID_TI_XIO2001)) {
-+			i++;
-+		}
-+		pdev = pdev->bus->self;
-+	}
-+	while (!pci_is_root_bus(dev->bus)) {
-+		/* if we are directly downstream from 1st TI XIO2001 bridge */
-+		if (dev->bus && dev->bus->self &&
-+		    (dev->bus->self->vendor == PCI_VENDOR_ID_TI) &&
-+		    (dev->bus->self->device == PCI_DEVICE_ID_TI_XIO2001)) {
-+			if (--i == 0) {
-+				/* swap IRQs and swizzle backwards */
-+				*pin = (15 - PCI_SLOT(dev->devfn)) + 1;
-+				dev = dev->bus->self;
-+				continue;
-+			}
-+		}
-+		*pin = pci_swizzle_interrupt_pin(dev, *pin);
-+		dev = dev->bus->self;
-+	}
-+	return PCI_SLOT(dev->devfn);
-+}
-+
- static int __init imx6_pcie_probe(struct platform_device *pdev)
- {
- 	struct imx6_pcie *imx6_pcie;
-@@ -648,6 +681,9 @@ static int __init imx6_pcie_probe(struct
- 		return PTR_ERR(imx6_pcie->iomuxc_gpr);
- 	}
- 
-+	if (of_machine_is_compatible("gw,ventana"))
-+		pp->swizzle = ventana_swizzle;
-+
- 	ret = imx6_add_pcie_port(pp, pdev);
- 	if (ret < 0)
- 		return ret;
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -822,6 +822,7 @@
- #define PCI_DEVICE_ID_TI_XX12		0x8039
- #define PCI_DEVICE_ID_TI_XX12_FM	0x803b
- #define PCI_DEVICE_ID_TI_XIO2000A	0x8231
-+#define PCI_DEVICE_ID_TI_XIO2001	0x8240
- #define PCI_DEVICE_ID_TI_1130		0xac12
- #define PCI_DEVICE_ID_TI_1031		0xac13
- #define PCI_DEVICE_ID_TI_1131		0xac15
diff --git a/target/linux/imx6/patches-3.14/202-net-igb-add-i210-i211-support-for-phy-read-write.patch b/target/linux/imx6/patches-3.14/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
deleted file mode 100644
index 9de5dfe..0000000
--- a/target/linux/imx6/patches-3.14/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-Author: Tim Harvey <tharvey@gateworks.com>
-Date:   Thu May 15 00:12:26 2014 -0700
-
-    net: igb: add i210/i211 support for phy read/write
-    
-    The i210/i211 uses the MDICNFG register for the phy address instead of the
-    MDIC register.
-    
-    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/net/ethernet/intel/igb/e1000_phy.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
-@@ -139,7 +139,7 @@ out:
- s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
- {
- 	struct e1000_phy_info *phy = &hw->phy;
--	u32 i, mdic = 0;
-+	u32 i, mdicnfg, mdic = 0;
- 	s32 ret_val = 0;
- 
- 	if (offset > MAX_PHY_REG_ADDRESS) {
-@@ -152,11 +152,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
- 	 * Control register.  The MAC will take care of interfacing with the
- 	 * PHY to retrieve the desired data.
- 	 */
--	mdic = ((offset << E1000_MDIC_REG_SHIFT) |
--		(phy->addr << E1000_MDIC_PHY_SHIFT) |
--		(E1000_MDIC_OP_READ));
-+	switch (hw->mac.type) {
-+	case e1000_i210:
-+	case e1000_i211:
-+		mdicnfg = rd32(E1000_MDICNFG);
-+		mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+		mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+		wr32(E1000_MDICNFG, mdicnfg);
-+		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-+			(E1000_MDIC_OP_READ));
-+		break;
-+	default:
-+		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-+			(phy->addr << E1000_MDIC_PHY_SHIFT) |
-+			(E1000_MDIC_OP_READ));
-+		break;
-+	}
- 
- 	wr32(E1000_MDIC, mdic);
-+	wrfl();
- 
- 	/* Poll the ready bit to see if the MDI read completed
- 	 * Increasing the time out as testing showed failures with
-@@ -181,6 +195,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
- 	*data = (u16) mdic;
- 
- out:
-+	switch (hw->mac.type) {
-+		/* restore MDICNFG to have phy's addr */
-+		case e1000_i210:
-+		case e1000_i211:
-+			mdicnfg = rd32(E1000_MDICNFG);
-+			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+			mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
-+			wr32(E1000_MDICNFG, mdicnfg);
-+			break;
-+		default:
-+			break;
-+	}
- 	return ret_val;
- }
- 
-@@ -195,7 +221,7 @@ out:
- s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
- {
- 	struct e1000_phy_info *phy = &hw->phy;
--	u32 i, mdic = 0;
-+	u32 i, mdicnfg, mdic = 0;
- 	s32 ret_val = 0;
- 
- 	if (offset > MAX_PHY_REG_ADDRESS) {
-@@ -208,12 +234,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- 	 * Control register.  The MAC will take care of interfacing with the
- 	 * PHY to retrieve the desired data.
- 	 */
--	mdic = (((u32)data) |
--		(offset << E1000_MDIC_REG_SHIFT) |
--		(phy->addr << E1000_MDIC_PHY_SHIFT) |
--		(E1000_MDIC_OP_WRITE));
-+	switch (hw->mac.type) {
-+		case e1000_i210:
-+		case e1000_i211:
-+			mdicnfg = rd32(E1000_MDICNFG);
-+			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+			mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+			wr32(E1000_MDICNFG, mdicnfg);
-+			mdic = (((u32)data) |
-+				(offset << E1000_MDIC_REG_SHIFT) |
-+				(E1000_MDIC_OP_WRITE));
-+			break;
-+		default:
-+			mdic = (((u32)data) |
-+				(offset << E1000_MDIC_REG_SHIFT) |
-+				(phy->addr << E1000_MDIC_PHY_SHIFT) |
-+				(E1000_MDIC_OP_WRITE));
-+			break;
-+	}
- 
- 	wr32(E1000_MDIC, mdic);
-+	wrfl();
- 
- 	/* Poll the ready bit to see if the MDI read completed
- 	 * Increasing the time out as testing showed failures with
-@@ -237,6 +278,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- 	}
- 
- out:
-+	switch (hw->mac.type) {
-+		/* restore MDICNFG to have phy's addr */
-+		case e1000_i210:
-+		case e1000_i211:
-+			mdicnfg = rd32(E1000_MDICNFG);
-+			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+			mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
-+			wr32(E1000_MDICNFG, mdicnfg);
-+			break;
-+		default:
-+			break;
-+	}
- 	return ret_val;
- }
- 
diff --git a/target/linux/imx6/patches-3.14/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch b/target/linux/imx6/patches-3.14/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch
deleted file mode 100644
index b6688db..0000000
--- a/target/linux/imx6/patches-3.14/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch
+++ /dev/null
@@ -1,255 +0,0 @@
-Author: Tim Harvey <tharvey@gateworks.com>
-Date:   Thu May 15 00:29:18 2014 -0700
-
-    net: igb: add phy read/write functions that accept phy addr
-    
-    Add igb_write_reg_gs40g/igb_read_reg_gs40g that can be passed a phy address.
-    The existing igb_write_phy_reg_gs40g/igb_read_phy_reg_gs40g become wrappers
-    to this function.
-    
-    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/net/ethernet/intel/igb/e1000_82575.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
-@@ -2142,7 +2142,7 @@ static s32 igb_read_phy_reg_82580(struct
- 	if (ret_val)
- 		goto out;
- 
--	ret_val = igb_read_phy_reg_mdic(hw, offset, data);
-+	ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr, offset, data);
- 
- 	hw->phy.ops.release(hw);
- 
-@@ -2167,7 +2167,7 @@ static s32 igb_write_phy_reg_82580(struc
- 	if (ret_val)
- 		goto out;
- 
--	ret_val = igb_write_phy_reg_mdic(hw, offset, data);
-+	ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr, offset, data);
- 
- 	hw->phy.ops.release(hw);
- 
---- a/drivers/net/ethernet/intel/igb/e1000_phy.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
-@@ -136,9 +136,8 @@ out:
-  *  Reads the MDI control regsiter in the PHY at offset and stores the
-  *  information read to data.
-  **/
--s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
-+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
- {
--	struct e1000_phy_info *phy = &hw->phy;
- 	u32 i, mdicnfg, mdic = 0;
- 	s32 ret_val = 0;
- 
-@@ -157,14 +156,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
- 	case e1000_i211:
- 		mdicnfg = rd32(E1000_MDICNFG);
- 		mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
--		mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+		mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
- 		wr32(E1000_MDICNFG, mdicnfg);
- 		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
- 			(E1000_MDIC_OP_READ));
- 		break;
- 	default:
- 		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
--			(phy->addr << E1000_MDIC_PHY_SHIFT) |
-+			(addr << E1000_MDIC_PHY_SHIFT) |
- 			(E1000_MDIC_OP_READ));
- 		break;
- 	}
-@@ -218,9 +217,8 @@ out:
-  *
-  *  Writes data to MDI control register in the PHY at offset.
-  **/
--s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
-+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
- {
--	struct e1000_phy_info *phy = &hw->phy;
- 	u32 i, mdicnfg, mdic = 0;
- 	s32 ret_val = 0;
- 
-@@ -239,7 +237,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- 		case e1000_i211:
- 			mdicnfg = rd32(E1000_MDICNFG);
- 			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
--			mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+			mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
- 			wr32(E1000_MDICNFG, mdicnfg);
- 			mdic = (((u32)data) |
- 				(offset << E1000_MDIC_REG_SHIFT) |
-@@ -248,7 +246,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- 		default:
- 			mdic = (((u32)data) |
- 				(offset << E1000_MDIC_REG_SHIFT) |
--				(phy->addr << E1000_MDIC_PHY_SHIFT) |
-+				(addr << E1000_MDIC_PHY_SHIFT) |
- 				(E1000_MDIC_OP_WRITE));
- 			break;
- 	}
-@@ -539,7 +537,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
- 		goto out;
- 
- 	if (offset > MAX_PHY_MULTI_PAGE_REG) {
--		ret_val = igb_write_phy_reg_mdic(hw,
-+		ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
- 						 IGP01E1000_PHY_PAGE_SELECT,
- 						 (u16)offset);
- 		if (ret_val) {
-@@ -548,8 +546,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
- 		}
- 	}
- 
--	ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
--					data);
-+	ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr,
-+					MAX_PHY_REG_ADDRESS & offset, data);
- 
- 	hw->phy.ops.release(hw);
- 
-@@ -578,7 +576,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h
- 		goto out;
- 
- 	if (offset > MAX_PHY_MULTI_PAGE_REG) {
--		ret_val = igb_write_phy_reg_mdic(hw,
-+		ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
- 						 IGP01E1000_PHY_PAGE_SELECT,
- 						 (u16)offset);
- 		if (ret_val) {
-@@ -587,8 +585,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h
- 		}
- 	}
- 
--	ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
--					 data);
-+	ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
-+					 MAX_PHY_REG_ADDRESS & offset, data);
- 
- 	hw->phy.ops.release(hw);
- 
-@@ -2554,8 +2552,9 @@ out:
- }
- 
- /**
-- *  igb_write_phy_reg_gs40g - Write GS40G PHY register
-+ *  igb_write_reg_gs40g - Write GS40G PHY register
-  *  @hw: pointer to the HW structure
-+ *  @addr: phy address to write to
-  *  @offset: lower half is register offset to write to
-  *     upper half is page to use.
-  *  @data: data to write at register offset
-@@ -2563,7 +2562,7 @@ out:
-  *  Acquires semaphore, if necessary, then writes the data to PHY register
-  *  at the offset.  Release any acquired semaphores before exiting.
-  **/
--s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
-+s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
- {
- 	s32 ret_val;
- 	u16 page = offset >> GS40G_PAGE_SHIFT;
-@@ -2573,10 +2572,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000
- 	if (ret_val)
- 		return ret_val;
- 
--	ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-+	ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
- 	if (ret_val)
- 		goto release;
--	ret_val = igb_write_phy_reg_mdic(hw, offset, data);
-+	ret_val = igb_write_phy_reg_mdic(hw, addr, offset, data);
- 
- release:
- 	hw->phy.ops.release(hw);
-@@ -2584,8 +2583,24 @@ release:
- }
- 
- /**
-- *  igb_read_phy_reg_gs40g - Read GS40G  PHY register
-+ *  igb_write_phy_reg_gs40g - Write GS40G PHY register
-+ *  @hw: pointer to the HW structure
-+ *  @offset: lower half is register offset to write to
-+ *     upper half is page to use.
-+ *  @data: data to write at register offset
-+ *
-+ *  Acquires semaphore, if necessary, then writes the data to PHY register
-+ *  at the offset.  Release any acquired semaphores before exiting.
-+ **/
-+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
-+{
-+	return igb_write_reg_gs40g(hw, hw->phy.addr, offset, data);
-+}
-+
-+/**
-+ *  igb_read_reg_gs40g - Read GS40G  PHY register
-  *  @hw: pointer to the HW structure
-+ *  @addr: phy address to read from
-  *  @offset: lower half is register offset to read to
-  *     upper half is page to use.
-  *  @data: data to read at register offset
-@@ -2593,7 +2608,7 @@ release:
-  *  Acquires semaphore, if necessary, then reads the data in the PHY register
-  *  at the offset.  Release any acquired semaphores before exiting.
-  **/
--s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
-+s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
- {
- 	s32 ret_val;
- 	u16 page = offset >> GS40G_PAGE_SHIFT;
-@@ -2603,10 +2618,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_
- 	if (ret_val)
- 		return ret_val;
- 
--	ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-+	ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
- 	if (ret_val)
- 		goto release;
--	ret_val = igb_read_phy_reg_mdic(hw, offset, data);
-+	ret_val = igb_read_phy_reg_mdic(hw, addr, offset, data);
- 
- release:
- 	hw->phy.ops.release(hw);
-@@ -2614,6 +2629,21 @@ release:
- }
- 
- /**
-+ *  igb_read_phy_reg_gs40g - Read GS40G  PHY register
-+ *  @hw: pointer to the HW structure
-+ *  @offset: lower half is register offset to read to
-+ *     upper half is page to use.
-+ *  @data: data to read at register offset
-+ *
-+ *  Acquires semaphore, if necessary, then reads the data in the PHY register
-+ *  at the offset.  Release any acquired semaphores before exiting.
-+ **/
-+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
-+{
-+	return igb_read_reg_gs40g(hw, hw->phy.addr, offset, data);
-+}
-+
-+/**
-  *  igb_set_master_slave_mode - Setup PHY for Master/slave mode
-  *  @hw: pointer to the HW structure
-  *
---- a/drivers/net/ethernet/intel/igb/e1000_phy.h
-+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
-@@ -65,8 +65,8 @@ s32  igb_phy_has_link(struct e1000_hw *h
- void igb_power_up_phy_copper(struct e1000_hw *hw);
- void igb_power_down_phy_copper(struct e1000_hw *hw);
- s32  igb_phy_init_script_igp3(struct e1000_hw *hw);
--s32  igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
--s32  igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
-+s32  igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
-+s32  igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
- s32  igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
- s32  igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
- s32  igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
-@@ -77,6 +77,8 @@ s32  igb_phy_force_speed_duplex_82580(st
- s32  igb_get_cable_length_82580(struct e1000_hw *hw);
- s32  igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
- s32  igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
-+s32  igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
-+s32  igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
- s32  igb_check_polarity_m88(struct e1000_hw *hw);
- 
- /* IGP01E1000 Specific Registers */
diff --git a/target/linux/imx6/patches-3.14/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch b/target/linux/imx6/patches-3.14/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
deleted file mode 100644
index 0bcbbd7..0000000
--- a/target/linux/imx6/patches-3.14/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
+++ /dev/null
@@ -1,303 +0,0 @@
-Author: Tim Harvey <tharvey@gateworks.com>
-Date:   Thu May 15 12:36:23 2014 -0700
-
-    net: igb: register mii_bus for SerDes w/ external phy
-    
-    If an i210 is configured for 1000BASE-BX link_mode and has an external phy
-    specified, then register an mii bus using the external phy address as
-    a mask.
-    
-    An i210 hooked to an external standard phy will be configured with a link_mo
-    of SGMII in which case phy ops will be configured and used internall in the
-    igb driver for link status. However, in certain cases one might be using a
-    backplane SerDes connection to something that talks on the mdio bus but is
-    not a standard phy, such as a switch. In this case by registering an mdio
-    bus a phy driver can manage the device.
-    
-    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/net/ethernet/intel/igb/e1000_82575.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
-@@ -606,13 +606,25 @@ static s32 igb_get_invariants_82575(stru
- 	switch (link_mode) {
- 	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
- 		hw->phy.media_type = e1000_media_type_internal_serdes;
-+		if (igb_sgmii_uses_mdio_82575(hw)) {
-+			u32 mdicnfg = rd32(E1000_MDICNFG);
-+			mdicnfg &= E1000_MDICNFG_PHY_MASK;
-+			hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
-+			hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
-+			       hw->phy.addr);
-+		} else {
-+			hw_dbg("1000BASE_KX");
-+		}
- 		break;
- 	case E1000_CTRL_EXT_LINK_MODE_SGMII:
- 		/* Get phy control interface type set (MDIO vs. I2C)*/
- 		if (igb_sgmii_uses_mdio_82575(hw)) {
- 			hw->phy.media_type = e1000_media_type_copper;
- 			dev_spec->sgmii_active = true;
-+			hw_dbg("SGMII with external MDIO PHY");
- 			break;
-+		} else {
-+			hw_dbg("SGMII with external I2C PHY");
- 		}
- 		/* fall through for I2C based SGMII */
- 	case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
-@@ -629,8 +641,11 @@ static s32 igb_get_invariants_82575(stru
- 				hw->phy.media_type = e1000_media_type_copper;
- 				dev_spec->sgmii_active = true;
- 			}
-+			hw_dbg("SERDES with external SFP");
- 
- 			break;
-+		} else {
-+			hw_dbg("SERDES");
- 		}
- 
- 		/* do not change link mode for 100BaseFX */
---- a/drivers/net/ethernet/intel/igb/e1000_hw.h
-+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
-@@ -32,6 +32,7 @@
- #include <linux/delay.h>
- #include <linux/io.h>
- #include <linux/netdevice.h>
-+#include <linux/phy.h>
- 
- #include "e1000_regs.h"
- #include "e1000_defines.h"
-@@ -553,6 +554,12 @@ struct e1000_hw {
- 	struct e1000_mbx_info mbx;
- 	struct e1000_host_mng_dhcp_cookie mng_cookie;
- 
-+#ifdef CONFIG_PHYLIB
-+	/* Phylib and MDIO interface */
-+	struct mii_bus *mii_bus;
-+	struct phy_device *phy_dev;
-+	phy_interface_t phy_interface;
-+#endif
- 	union {
- 		struct e1000_dev_spec_82575	_82575;
- 	} dev_spec;
---- a/drivers/net/ethernet/intel/igb/igb_main.c
-+++ b/drivers/net/ethernet/intel/igb/igb_main.c
-@@ -45,6 +45,7 @@
- #include <linux/if_vlan.h>
- #include <linux/pci.h>
- #include <linux/pci-aspm.h>
-+#include <linux/phy.h>
- #include <linux/delay.h>
- #include <linux/interrupt.h>
- #include <linux/ip.h>
-@@ -2191,6 +2192,126 @@ static s32 igb_init_i2c(struct igb_adapt
- 	return status;
- }
- 
-+
-+#ifdef CONFIG_PHYLIB
-+/*
-+ * MMIO/PHYdev support
-+ */
-+
-+static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-+{
-+	struct e1000_hw *hw = bus->priv;
-+	u16 out;
-+	int err;
-+
-+	err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
-+	if (err)
-+		return err;
-+	return out;
-+}
-+
-+static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-+                               u16 val)
-+{
-+	struct e1000_hw *hw = bus->priv;
-+
-+	return igb_write_reg_gs40g(hw, mii_id, regnum, val);
-+}
-+
-+static int igb_enet_mdio_reset(struct mii_bus *bus)
-+{
-+	udelay(300);
-+	return 0;
-+}
-+
-+static void igb_enet_mii_link(struct net_device *netdev)
-+{
-+}
-+
-+/* Probe the mdio bus for phys and connect them */
-+static int igb_enet_mii_probe(struct net_device *netdev)
-+{
-+	struct igb_adapter *adapter = netdev_priv(netdev);
-+	struct e1000_hw *hw = &adapter->hw;
-+	struct phy_device *phy_dev = NULL;
-+	int phy_id;
-+
-+	/* check for attached phy */
-+	for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
-+		if (hw->mii_bus->phy_map[phy_id]) {
-+			phy_dev = hw->mii_bus->phy_map[phy_id];
-+			break;
-+		}
-+	}
-+	if (!phy_dev) {
-+		netdev_err(netdev, "no PHY found\n");
-+		return -ENODEV;
-+	}
-+
-+	hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
-+	phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
-+			      igb_enet_mii_link, hw->phy_interface);
-+	if (IS_ERR(phy_dev)) {
-+		netdev_err(netdev, "could not attach to PHY\n");
-+		return PTR_ERR(phy_dev);
-+	}
-+
-+	hw->phy_dev = phy_dev;
-+	netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
-+		hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
-+
-+	return 0;
-+}
-+
-+/* Create and register mdio bus */
-+static int igb_enet_mii_init(struct pci_dev *pdev)
-+{
-+	struct mii_bus *mii_bus;
-+	struct net_device *netdev = pci_get_drvdata(pdev);
-+	struct igb_adapter *adapter = netdev_priv(netdev);
-+	struct e1000_hw *hw = &adapter->hw;
-+	int err;
-+
-+	mii_bus = mdiobus_alloc();
-+	if (mii_bus == NULL) {
-+		err = -ENOMEM;
-+		goto err_out;
-+	}
-+
-+	mii_bus->name = "igb_enet_mii_bus";
-+	mii_bus->read = igb_enet_mdio_read;
-+	mii_bus->write = igb_enet_mdio_write;
-+	mii_bus->reset = igb_enet_mdio_reset;
-+	snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
-+		 pci_name(pdev), hw->device_id + 1);
-+	mii_bus->priv = hw;
-+	mii_bus->parent = &pdev->dev;
-+	mii_bus->phy_mask = ~(1 << hw->phy.addr);
-+
-+	err = mdiobus_register(mii_bus);
-+	if (err) {
-+		printk(KERN_ERR "failed to register mii_bus: %d\n", err);
-+		goto err_out_free_mdiobus;
-+	}
-+	hw->mii_bus = mii_bus;
-+
-+	return 0;
-+
-+err_out_free_mdiobus:
-+	mdiobus_free(mii_bus);
-+err_out:
-+	return err;
-+}
-+
-+static void igb_enet_mii_remove(struct e1000_hw *hw)
-+{
-+	if (hw->mii_bus) {
-+		mdiobus_unregister(hw->mii_bus);
-+		mdiobus_free(hw->mii_bus);
-+	}
-+}
-+#endif /* CONFIG_PHYLIB */
-+
- /**
-  *  igb_probe - Device Initialization Routine
-  *  @pdev: PCI device information struct
-@@ -2593,6 +2714,13 @@ static int igb_probe(struct pci_dev *pde
- 	}
- 
- 	pm_runtime_put_noidle(&pdev->dev);
-+
-+#ifdef CONFIG_PHYLIB
-+	/* create and register the mdio bus if using ext phy */
-+	if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
-+		igb_enet_mii_init(pdev);
-+#endif
-+
- 	return 0;
- 
- err_register:
-@@ -2736,6 +2864,10 @@ static void igb_remove(struct pci_dev *p
- 	struct e1000_hw *hw = &adapter->hw;
- 
- 	pm_runtime_get_noresume(&pdev->dev);
-+#ifdef CONFIG_PHYLIB
-+	if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
-+		igb_enet_mii_remove(hw);
-+#endif
- #ifdef CONFIG_IGB_HWMON
- 	igb_sysfs_exit(adapter);
- #endif
-@@ -3040,6 +3172,12 @@ static int __igb_open(struct net_device
- 	if (!resuming)
- 		pm_runtime_put(&pdev->dev);
- 
-+#ifdef CONFIG_PHYLIB
-+	/* Probe and connect to PHY if using ext phy */
-+	if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
-+		igb_enet_mii_probe(netdev);
-+#endif
-+
- 	/* start the watchdog. */
- 	hw->mac.get_link_status = 1;
- 	schedule_work(&adapter->watchdog_task);
-@@ -7095,21 +7233,41 @@ void igb_alloc_rx_buffers(struct igb_rin
- static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
- {
- 	struct igb_adapter *adapter = netdev_priv(netdev);
-+	struct e1000_hw *hw = &adapter->hw;
- 	struct mii_ioctl_data *data = if_mii(ifr);
- 
--	if (adapter->hw.phy.media_type != e1000_media_type_copper)
-+	if (adapter->hw.phy.media_type != e1000_media_type_copper &&
-+	    !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
- 		return -EOPNOTSUPP;
- 
- 	switch (cmd) {
- 	case SIOCGMIIPHY:
--		data->phy_id = adapter->hw.phy.addr;
-+		data->phy_id = hw->phy.addr;
- 		break;
- 	case SIOCGMIIREG:
--		if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
--		                     &data->val_out))
--			return -EIO;
-+		if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
-+			if (igb_read_reg_gs40g(hw, data->phy_id,
-+					       data->reg_num & 0x1F,
-+			                       &data->val_out))
-+				return -EIO;
-+		} else {
-+			if (igb_read_phy_reg(hw, data->reg_num & 0x1F,
-+			                     &data->val_out))
-+				return -EIO;
-+		}
- 		break;
- 	case SIOCSMIIREG:
-+		if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
-+			if (igb_write_reg_gs40g(hw, data->phy_id,
-+					        data->reg_num & 0x1F,
-+					        data->val_in))
-+				return -EIO;
-+		} else {
-+			if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
-+					      data->val_in))
-+				return -EIO;
-+		}
-+		break;
- 	default:
- 		return -EOPNOTSUPP;
- 	}
diff --git a/target/linux/imx6/patches-3.14/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch b/target/linux/imx6/patches-3.14/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
deleted file mode 100644
index 1350d5a..0000000
--- a/target/linux/imx6/patches-3.14/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -273,6 +273,14 @@ endif # RTL8366_SMI
- 
- source "drivers/net/phy/b53/Kconfig"
- 
-+config GATEWORKS_GW16083
-+	tristate "Gateworks GW16083 Ethernet Expansion Mezzanine"
-+	---help---
-+	  The Gateworks GW16083 Ethernet Expansion Mezzanine connects to a
-+	  Gateworks Ventana baseboard and provides a 7-port GbE managed
-+	  Ethernet switch with 4 dedicated GbE RJ45 ports, and 2 Gbe/SFP
-+	  ports"
-+
- endif # PHYLIB
- 
- config MICREL_KS8995MA
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -39,6 +39,7 @@ obj-$(CONFIG_NATIONAL_PHY)	+= national.o
- obj-$(CONFIG_DP83640_PHY)	+= dp83640.o
- obj-$(CONFIG_STE10XP)		+= ste10Xp.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
-+obj-$(CONFIG_GATEWORKS_GW16083)	+= gw16083.o
- obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
- obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
- obj-$(CONFIG_AT803X_PHY)	+= at803x.o
diff --git a/target/linux/imx6/patches-3.14/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch b/target/linux/imx6/patches-3.14/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
deleted file mode 100644
index cc5f920..0000000
--- a/target/linux/imx6/patches-3.14/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-@@ -201,6 +201,11 @@
- 			};
- 		};
- 	};
-+
-+	gw16083: gw16083@52 {
-+		compatible = "gateworks,gw16083";
-+		reg = <0x52>;
-+	};
- };
- 
- &i2c3 {
---- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-@@ -268,6 +268,11 @@
- 			};
- 		};
- 	};
-+
-+	gw16083: gw16083@52 {
-+		compatible = "gateworks,gw16083";
-+		reg = <0x52>;
-+	};
- };
- 
- &i2c3 {
---- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-@@ -289,6 +289,11 @@
- 			};
- 		};
- 	};
-+
-+	gw16083: gw16083@52 {
-+		compatible = "gateworks,gw16083";
-+		reg = <0x52>;
-+	};
- };
- 
- &i2c3 {
---- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-@@ -317,6 +317,11 @@
- 		compatible = "sil,si52147";
- 		reg = <0x6b>;
- 	};
-+
-+	gw16083: gw16083@52 {
-+		compatible = "gateworks,gw16083";
-+		reg = <0x52>;
-+	};
- };
- 
- &i2c3 {
diff --git a/target/linux/imx6/patches-3.14/208-ventana-plx-allow-override-gpio-output-mask.patch b/target/linux/imx6/patches-3.14/208-ventana-plx-allow-override-gpio-output-mask.patch
deleted file mode 100644
index 97298fd..0000000
--- a/target/linux/imx6/patches-3.14/208-ventana-plx-allow-override-gpio-output-mask.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-This patch allows passing in the gpio output mask used for GPIO0-7 on the
-PLX PCIe bridge. These GPIO's are used for PERST# on the downstream ports.
-
-Allowing the kernel to override the default configuration allows for keeping
-specific devices held in reset. One important use of this is to allow
-temporarily disabling devices that may request too many resources such as
-an unprogrammed i210 device.
-
---- a/arch/arm/mach-imx/mach-imx6q.c
-+++ b/arch/arm/mach-imx/mach-imx6q.c
-@@ -84,6 +84,7 @@ static int ksz9031rn_phy_fixup(struct ph
-  * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
-  * as they are used for slots1-7 PERST#
-  */
-+unsigned int ventana_plx_gpio = 0xfe;
- static void ventana_pciesw_early_fixup(struct pci_dev *dev)
- {
- 	u32 dw;
-@@ -95,19 +96,25 @@ static void ventana_pciesw_early_fixup(s
- 		return;
- 
- 	pci_read_config_dword(dev, 0x62c, &dw);
-+	dev_info(&dev->dev, "de-asserting downstream PERST# 0x%04x\n",
-+		 ventana_plx_gpio);
- 	dw |= 0xaaa8; // GPIO1-7 outputs
- 	pci_write_config_dword(dev, 0x62c, dw);
--
--	pci_read_config_dword(dev, 0x644, &dw);
--	dw |= 0xfe;   // GPIO1-7 output high
--	pci_write_config_dword(dev, 0x644, dw);
--
-+	pci_write_config_dword(dev, 0x644, ventana_plx_gpio);
- 	msleep(100);
- }
- DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
- DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
- DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
- 
-+static int __init setup_ventana_plx_gpio(char *str)
-+{
-+	get_option(&str, &ventana_plx_gpio);
-+
-+	return 0;
-+}
-+early_param("plx_gpio", setup_ventana_plx_gpio);
-+
- static int ar8031_phy_fixup(struct phy_device *dev)
- {
- 	u16 val;
-@@ -328,7 +335,7 @@ static void __init imx6q_init_irq(void)
- 	irqchip_init();
- }
- 
--static const char *imx6q_dt_compat[] __initconst = {
-+static const char *imx6q_dt_compat[] __initdata = {
- 	"fsl,imx6dl",
- 	"fsl,imx6q",
- 	NULL,
diff --git a/target/linux/imx6/patches-3.14/209-ventana-gw552x.patch b/target/linux/imx6/patches-3.14/209-ventana-gw552x.patch
deleted file mode 100644
index 7c7a295..0000000
--- a/target/linux/imx6/patches-3.14/209-ventana-gw552x.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -158,6 +158,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- 	imx6dl-gw52xx.dtb \
- 	imx6dl-gw53xx.dtb \
- 	imx6dl-gw54xx.dtb \
-+	imx6dl-gw552x.dtb \
- 	imx6dl-hummingboard.dtb \
- 	imx6dl-sabreauto.dtb \
- 	imx6dl-sabresd.dtb \
-@@ -169,6 +170,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- 	imx6q-gw53xx.dtb \
- 	imx6q-gw5400-a.dtb \
- 	imx6q-gw54xx.dtb \
-+	imx6q-gw552x.dtb \
- 	imx6q-phytec-pbab01.dtb \
- 	imx6q-sabreauto.dtb \
- 	imx6q-sabrelite.dtb \