summaryrefslogtreecommitdiff
path: root/target/linux/imx6
diff options
context:
space:
mode:
authorLuka Perkov <luka@openwrt.org>2013-10-29 02:19:03 +0000
committerLuka Perkov <luka@openwrt.org>2013-10-29 02:19:03 +0000
commitf44c65c7c8d57b08c783051a55c7e3eb367e6f7b (patch)
treecd0bf074d3a84802878791a8b4b7bd8d5b0a0faa /target/linux/imx6
parent7b7c06d2e3cdd8d54c3a99d2cb0725ecbc07c9d0 (diff)
downloadmtk-20170518-f44c65c7c8d57b08c783051a55c7e3eb367e6f7b.zip
mtk-20170518-f44c65c7c8d57b08c783051a55c7e3eb367e6f7b.tar.gz
mtk-20170518-f44c65c7c8d57b08c783051a55c7e3eb367e6f7b.tar.bz2
imx6: update 3.10 patches
Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38571
Diffstat (limited to 'target/linux/imx6')
-rw-r--r--target/linux/imx6/patches-3.10/0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch (renamed from target/linux/imx6/patches-3.10/0020-pfuze100-regulator.patch)191
-rw-r--r--target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch44
-rw-r--r--target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch35
-rw-r--r--target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch21
-rw-r--r--target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch32
-rw-r--r--target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch19
-rw-r--r--target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch22
-rw-r--r--target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch67
-rw-r--r--target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch56
-rw-r--r--target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch23
-rw-r--r--target/linux/imx6/patches-3.10/0029-pfuze100-allow-misprogrammed-id.patch (renamed from target/linux/imx6/patches-3.10/0021-pfuze100-allow-misprogrammed-id.patch)0
-rw-r--r--target/linux/imx6/patches-3.10/0034-PCI-imx6-swizzle-interrupts.patch6
12 files changed, 489 insertions, 27 deletions
diff --git a/target/linux/imx6/patches-3.10/0020-pfuze100-regulator.patch b/target/linux/imx6/patches-3.10/0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch
index 1e1294a..cbce5e7 100644
--- a/target/linux/imx6/patches-3.10/0020-pfuze100-regulator.patch
+++ b/target/linux/imx6/patches-3.10/0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch
@@ -1,13 +1,149 @@
+From 3784b6d64dc52ed3fbebad61a85ab9b7a687a167 Mon Sep 17 00:00:00 2001
+From: Robin Gong <b38343@freescale.com>
+Date: Thu, 25 Jul 2013 11:33:18 +0800
+Subject: [PATCH] regulator: pfuze100: add pfuze100 regulator driver
+
+Add pfuze100 regulator driver.
+
+Signed-off-by: Robin Gong <b38343@freescale.com>
+Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ .../devicetree/bindings/regulator/pfuze100.txt | 113 +++++
+ drivers/regulator/Kconfig | 7 +
+ drivers/regulator/Makefile | 1 +
+ drivers/regulator/pfuze100-regulator.c | 454 +++++++++++++++++++++
+ include/linux/regulator/pfuze100.h | 44 ++
+ 5 files changed, 619 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/regulator/pfuze100.txt
+ create mode 100644 drivers/regulator/pfuze100-regulator.c
+ create mode 100644 include/linux/regulator/pfuze100.h
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
+@@ -0,0 +1,113 @@
++PFUZE100 family of regulators
++
++Required properties:
++- compatible: "fsl,pfuze100"
++- reg: I2C slave address
++- regulators: This is the list of child nodes that specify the regulator
++ initialization data for defined regulators. Please refer to below doc
++ Documentation/devicetree/bindings/regulator/regulator.txt.
++
++ The valid names for regulators are:
++ sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
++
++Each regulator is defined using the standard binding for regulators.
++
++Example:
++
++ pmic: pfuze100@08 {
++ compatible = "fsl,pfuze100";
++ reg = <0x08>;
++
++ regulators {
++ sw1a_reg: sw1ab {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw1c_reg: sw1c {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw2_reg: sw2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3a_reg: sw3a {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3b_reg: sw3b {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw4_reg: sw4 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ swbst_reg: swbst {
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5150000>;
++ };
++
++ snvs_reg: vsnvs {
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vref_reg: vrefddr {
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vgen1_reg: vgen1 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen2_reg: vgen2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen3_reg: vgen3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ vgen4_reg: vgen4 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen5_reg: vgen5 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen6_reg: vgen6 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++ };
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
-@@ -300,6 +300,14 @@ config REGULATOR_PCF50633
+@@ -300,6 +300,13 @@ config REGULATOR_PCF50633
Say Y here to support the voltage regulators and convertors
on PCF50633
+config REGULATOR_PFUZE100
+ tristate "Support regulators on Freescale PFUZE100 PMIC"
+ depends on I2C
-+ select REGMAP_I2C
+ help
+ Say y here to support the regulators found on the Freescale PFUZE100
+ PMIC.
@@ -27,7 +163,7 @@
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
--- /dev/null
+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -0,0 +1,445 @@
+@@ -0,0 +1,454 @@
+/*
+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
@@ -123,15 +259,26 @@
+{
+ struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
+ int id = rdev->desc->id;
-+ unsigned int ramp_bits;
++ unsigned int val, ramp_bits, reg;
+ int ret;
+
+ if (id < PFUZE100_SWBST) {
-+ ramp_delay = 12500 / ramp_delay;
++ if (id == PFUZE100_SW1AB)
++ reg = PFUZE100_SW1ABVOL;
++ else
++ reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7;
++ regmap_read(pfuze100->regmap, reg, &val);
++
++ if (id <= PFUZE100_SW1C)
++ ramp_delay = 25000 / (2 * ramp_delay);
++ else if (val & 0x40)
++ ramp_delay = 50000 / (4 * ramp_delay);
++ else
++ ramp_delay = 25000 / (2 * ramp_delay);
++
+ ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
-+ ret = regmap_update_bits(pfuze100->regmap,
-+ rdev->desc->vsel_reg + 4,
-+ 0xc0, ramp_bits << 6);
++ ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0,
++ ramp_bits << 6);
+ if (ret < 0)
+ dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
+ } else
@@ -163,7 +310,6 @@
+
+static struct regulator_ops pfuze100_swb_regulator_ops = {
+ .list_voltage = regulator_list_voltage_table,
-+ .map_voltage = regulator_map_voltage_ascend,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+
@@ -315,7 +461,7 @@
+#else
+static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
+{
-+ return 0;
++ return NULL;
+}
+
+static inline struct regulator_init_data *match_init_data(int index)
@@ -362,7 +508,7 @@
+static const struct regmap_config pfuze_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
-+ .max_register = PFUZE_NUMREGS - 1,
++ .max_register = PFUZE_NUMREGS,
+ .cache_type = REGCACHE_RBTREE,
+};
+
@@ -380,7 +526,7 @@
+ if (!pfuze_chip)
+ return -ENOMEM;
+
-+ i2c_set_clientdata(client, pfuze_chip);
++ dev_set_drvdata(&client->dev, pfuze_chip);
+
+ memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
+ sizeof(pfuze_chip->regulator_descs));
@@ -407,11 +553,8 @@
+
+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
+ struct regulator_init_data *init_data;
-+ struct regulator_desc *desc;
+ int val;
+
-+ desc = &pfuze_chip->regulator_descs[i].desc;
-+
+ if (pdata)
+ init_data = pdata->init_data[i];
+ else
@@ -419,11 +562,13 @@
+
+ /* SW2~SW4 high bit check and modify the voltage value table */
+ if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
-+ regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
++ regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL +
++ (i - PFUZE100_SW2) * 7, &val);
+ if (val & 0x40) {
-+ desc->min_uV = 800000;
-+ desc->uV_step = 50000;
-+ desc->n_voltages = 51;
++ pfuze_chip->regulator_descs[i].desc.min_uV
++ = 800000;
++ pfuze_chip->regulator_descs[i].desc.uV_step
++ = 50000;
+ }
+ }
+
@@ -432,7 +577,8 @@
+ config.driver_data = pfuze_chip;
+ config.of_node = match_of_node(i);
+
-+ pfuze_chip->regulators[i] = regulator_register(desc, &config);
++ pfuze_chip->regulators[i] = regulator_register(&pfuze_chip
++ ->regulator_descs[i].desc, &config);
+ if (IS_ERR(pfuze_chip->regulators[i])) {
+ dev_err(&client->dev, "register regulator%s failed\n",
+ pfuze100_regulators[i].desc.name);
@@ -449,7 +595,7 @@
+static int pfuze100_regulator_remove(struct i2c_client *client)
+{
+ int i;
-+ struct pfuze_chip *pfuze_chip = i2c_get_clientdata(client);
++ struct pfuze_chip *pfuze_chip = dev_get_drvdata(&client->dev);
+
+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
+ regulator_unregister(pfuze_chip->regulators[i]);
@@ -471,8 +617,7 @@
+
+MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("i2c:pfuze100-regulator");
++MODULE_ALIAS("pfuze100-regulator");
--- /dev/null
+++ b/include/linux/regulator/pfuze100.h
@@ -0,0 +1,44 @@
diff --git a/target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch b/target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch
new file mode 100644
index 0000000..2a9fdff
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch
@@ -0,0 +1,44 @@
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: REGULATOR_PFUZE100 needs to select
+ REGMAP_I2C
+
+This fixes below build errors:
+
+ CC [M] drivers/regulator/pfuze100-regulator.o
+drivers/regulator/pfuze100-regulator.c:342:21: error: variable 'pfuze_regmap_config' has initializer but incomplete type
+drivers/regulator/pfuze100-regulator.c:343:2: error: unknown field 'reg_bits' specified in initializer
+drivers/regulator/pfuze100-regulator.c:343:2: warning: excess elements in struct initializer [enabled by default]
+drivers/regulator/pfuze100-regulator.c:343:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
+drivers/regulator/pfuze100-regulator.c:344:2: error: unknown field 'val_bits' specified in initializer
+drivers/regulator/pfuze100-regulator.c:344:2: warning: excess elements in struct initializer [enabled by default]
+drivers/regulator/pfuze100-regulator.c:344:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
+drivers/regulator/pfuze100-regulator.c:345:2: error: unknown field 'max_register' specified in initializer
+drivers/regulator/pfuze100-regulator.c:345:2: warning: excess elements in struct initializer [enabled by default]
+drivers/regulator/pfuze100-regulator.c:345:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
+drivers/regulator/pfuze100-regulator.c:346:2: error: unknown field 'cache_type' specified in initializer
+drivers/regulator/pfuze100-regulator.c:346:2: warning: excess elements in struct initializer [enabled by default]
+drivers/regulator/pfuze100-regulator.c:346:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
+drivers/regulator/pfuze100-regulator.c: In function 'pfuze100_regulator_probe':
+drivers/regulator/pfuze100-regulator.c:370:2: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
+drivers/regulator/pfuze100-regulator.c:370:21: warning: assignment makes pointer from integer without a cast [enabled by default]
+cc1: some warnings being treated as errors
+make[2]: *** [drivers/regulator/pfuze100-regulator.o] Error 1
+make[1]: *** [drivers/regulator] Error 2
+make: *** [drivers] Error 2
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/regulator/Kconfig
++++ b/drivers/regulator/Kconfig
+@@ -303,6 +303,7 @@ config REGULATOR_PCF50633
+ config REGULATOR_PFUZE100
+ tristate "Support regulators on Freescale PFUZE100 PMIC"
+ depends on I2C
++ select REGMAP_I2C
+ help
+ Say y here to support the regulators found on the Freescale PFUZE100
+ PMIC.
diff --git a/target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch b/target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch
new file mode 100644
index 0000000..488edb6
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch
@@ -0,0 +1,35 @@
+From: Robin Gong <b38343@freescale.com>
+Subject: [PATCH] regulator:pfuze100: fix build warning and correct the binding
+ doc
+
+fix building warning and correct the binding doc
+
+Signed-off-by: Robin Gong <b38343@freescale.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ Documentation/devicetree/bindings/regulator/pfuze100.txt | 2 ++
+ drivers/regulator/pfuze100-regulator.c | 2 +-
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
++++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
+@@ -3,6 +3,8 @@ PFUZE100 family of regulators
+ Required properties:
+ - compatible: "fsl,pfuze100"
+ - reg: I2C slave address
++
++Required child node:
+ - regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Please refer to below doc
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -295,7 +295,7 @@ static inline struct device_node *match_
+ #else
+ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
+ {
+- return NULL;
++ return 0;
+ }
+
+ static inline struct regulator_init_data *match_init_data(int index)
diff --git a/target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch b/target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch
new file mode 100644
index 0000000..dfdefe7
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch
@@ -0,0 +1,21 @@
+From: Robin Gong <b38343@freescale.com>
+Subject: [PATCH] regulator: pfuze100: add MODULE_LICENSE() in pfuze100 driver
+
+Fix building error on x86_64 and i386:
+WARNING: modpost: missing MODULE_LICENSE() in
+drivers/regulator/pfuze100-regulator.o
+
+Signed-off-by: Robin Gong <b38343@freescale.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -451,4 +451,5 @@ module_i2c_driver(pfuze_driver);
+
+ MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
+ MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
++MODULE_LICENSE("GPL v2");
+ MODULE_ALIAS("pfuze100-regulator");
diff --git a/target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch b/target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch
new file mode 100644
index 0000000..609ed05
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch
@@ -0,0 +1,32 @@
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Use i2c_[set|get]_clientdata
+
+Since this is a i2c driver, use i2c_[set|get]_clientdata instead of
+dev_[set|get]_drvdata.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -360,7 +360,7 @@ static int pfuze100_regulator_probe(stru
+ if (!pfuze_chip)
+ return -ENOMEM;
+
+- dev_set_drvdata(&client->dev, pfuze_chip);
++ i2c_set_clientdata(client, pfuze_chip);
+
+ memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
+ sizeof(pfuze_chip->regulator_descs));
+@@ -429,7 +429,7 @@ static int pfuze100_regulator_probe(stru
+ static int pfuze100_regulator_remove(struct i2c_client *client)
+ {
+ int i;
+- struct pfuze_chip *pfuze_chip = dev_get_drvdata(&client->dev);
++ struct pfuze_chip *pfuze_chip = i2c_get_clientdata(client);
+
+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
+ regulator_unregister(pfuze_chip->regulators[i]);
diff --git a/target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch b/target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch
new file mode 100644
index 0000000..41ee1fe
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch
@@ -0,0 +1,19 @@
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Fix module alias prefix
+
+i2c drivers use "i2c:" prefix for module alias.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -452,4 +452,4 @@ module_i2c_driver(pfuze_driver);
+ MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
+ MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
+ MODULE_LICENSE("GPL v2");
+-MODULE_ALIAS("pfuze100-regulator");
++MODULE_ALIAS("i2c:pfuze100-regulator");
diff --git a/target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch b/target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch
new file mode 100644
index 0000000..0821991
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch
@@ -0,0 +1,22 @@
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Use regulator_map_voltage_ascend
+
+All table based voltage list have ascendant order.
+Use regulator_map_voltage_ascend for them.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -144,6 +144,7 @@ static struct regulator_ops pfuze100_sw_
+
+ static struct regulator_ops pfuze100_swb_regulator_ops = {
+ .list_voltage = regulator_list_voltage_table,
++ .map_voltage = regulator_map_voltage_ascend,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+
diff --git a/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch b/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch
new file mode 100644
index 0000000..026ecce
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch
@@ -0,0 +1,67 @@
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Fix n_voltages setting for SW2~SW4 with
+ high bit set
+
+Current code adjust min_uV and uV_step but missed adjusting the n_voltages
+setting.
+
+When BIT6 is clear:
+ n_voltages = (1975000 - 400000) / 25000 + 1 = 64
+When BIT6 is set:
+ n_voltages = (3300000 - 800000) / 50000 + 1 = 51
+
+The n_voltages needs update because when BIT6 is set 0x73 ~ 0x7f are reserved.
+When using regulator_list_voltage_linear, the n_voltages does matter here
+because wrong n_voltages setting make the equation return wrong result.
+e.g. if selector is 63, regulator_list_voltage_linear returns
+ 800000 + (50000 * 63) = 4000000
+ It should return -EINVAL if the selector is in the range of 51 ~ 63.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -388,8 +388,11 @@ static int pfuze100_regulator_probe(stru
+
+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
+ struct regulator_init_data *init_data;
++ struct regulator_desc *desc;
+ int val;
+
++ desc = &pfuze_chip->regulator_descs[i].desc;
++
+ if (pdata)
+ init_data = pdata->init_data[i];
+ else
+@@ -397,13 +400,11 @@ static int pfuze100_regulator_probe(stru
+
+ /* SW2~SW4 high bit check and modify the voltage value table */
+ if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
+- regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL +
+- (i - PFUZE100_SW2) * 7, &val);
++ regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
+ if (val & 0x40) {
+- pfuze_chip->regulator_descs[i].desc.min_uV
+- = 800000;
+- pfuze_chip->regulator_descs[i].desc.uV_step
+- = 50000;
++ desc->min_uV = 800000;
++ desc->uV_step = 50000;
++ desc->n_voltages = 51;
+ }
+ }
+
+@@ -412,8 +413,7 @@ static int pfuze100_regulator_probe(stru
+ config.driver_data = pfuze_chip;
+ config.of_node = match_of_node(i);
+
+- pfuze_chip->regulators[i] = regulator_register(&pfuze_chip
+- ->regulator_descs[i].desc, &config);
++ pfuze_chip->regulators[i] = regulator_register(desc, &config);
+ if (IS_ERR(pfuze_chip->regulators[i])) {
+ dev_err(&client->dev, "register regulator%s failed\n",
+ pfuze100_regulators[i].desc.name);
diff --git a/target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch b/target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch
new file mode 100644
index 0000000..1089dff
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch
@@ -0,0 +1,56 @@
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Simplify pfuze100_set_ramp_delay
+ implementation
+
+Simplify the equation to calculate ramp_delay.
+Below equations are equivalent:
+ ramp_delay = 25000 / (2 * ramp_delay);
+ ramp_delay = 50000 / (4 * ramp_delay);
+ ramp_delay = 25000 / (2 * ramp_delay);
+ ramp_delay = 12500 / ramp_delay;
+So we don't need to read BIT6 of rdev->desc->vsel_reg for applying different
+equations.
+
+Also use rdev->desc->vsel_reg instead of run-time calculate register address.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Reviewed-by: Robin Gong <b38343@freescale.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 21 +++++----------------
+ 1 file changed, 5 insertions(+), 16 deletions(-)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -93,26 +93,15 @@ static int pfuze100_set_ramp_delay(struc
+ {
+ struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
+ int id = rdev->desc->id;
+- unsigned int val, ramp_bits, reg;
++ unsigned int ramp_bits;
+ int ret;
+
+ if (id < PFUZE100_SWBST) {
+- if (id == PFUZE100_SW1AB)
+- reg = PFUZE100_SW1ABVOL;
+- else
+- reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7;
+- regmap_read(pfuze100->regmap, reg, &val);
+-
+- if (id <= PFUZE100_SW1C)
+- ramp_delay = 25000 / (2 * ramp_delay);
+- else if (val & 0x40)
+- ramp_delay = 50000 / (4 * ramp_delay);
+- else
+- ramp_delay = 25000 / (2 * ramp_delay);
+-
++ ramp_delay = 12500 / ramp_delay;
+ ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
+- ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0,
+- ramp_bits << 6);
++ ret = regmap_update_bits(pfuze100->regmap,
++ rdev->desc->vsel_reg + 4,
++ 0xc0, ramp_bits << 6);
+ if (ret < 0)
+ dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
+ } else
diff --git a/target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch b/target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch
new file mode 100644
index 0000000..34ff796
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch
@@ -0,0 +1,23 @@
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Fix off-by-one for max_register setting
+
+max_register should be register count - 1.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Reviewed-by: Robin Gong <b38343@freescale.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -332,7 +332,7 @@ static int pfuze_identify(struct pfuze_c
+ static const struct regmap_config pfuze_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+- .max_register = PFUZE_NUMREGS,
++ .max_register = PFUZE_NUMREGS - 1,
+ .cache_type = REGCACHE_RBTREE,
+ };
+
diff --git a/target/linux/imx6/patches-3.10/0021-pfuze100-allow-misprogrammed-id.patch b/target/linux/imx6/patches-3.10/0029-pfuze100-allow-misprogrammed-id.patch
index a9399a9..a9399a9 100644
--- a/target/linux/imx6/patches-3.10/0021-pfuze100-allow-misprogrammed-id.patch
+++ b/target/linux/imx6/patches-3.10/0029-pfuze100-allow-misprogrammed-id.patch
diff --git a/target/linux/imx6/patches-3.10/0034-PCI-imx6-swizzle-interrupts.patch b/target/linux/imx6/patches-3.10/0034-PCI-imx6-swizzle-interrupts.patch
index 775bc78..d716fe4 100644
--- a/target/linux/imx6/patches-3.10/0034-PCI-imx6-swizzle-interrupts.patch
+++ b/target/linux/imx6/patches-3.10/0034-PCI-imx6-swizzle-interrupts.patch
@@ -1,6 +1,4 @@
-From 73a0e49b562da9b06e487fb8e051075543495be5 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
-Date: Thu, 17 Oct 2013 15:50:48 -0700
Subject: [PATCH 1/5] PCI: imx6: swizzle interrupts
@@ -11,7 +9,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com>
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
-@@ -676,7 +676,13 @@ int dw_pcie_map_irq(const struct pci_dev
+@@ -447,7 +447,13 @@ int dw_pcie_map_irq(const struct pci_dev
{
struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
@@ -25,4 +23,4 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+ }
}
- static void dw_pcie_add_bus(struct pci_bus *bus)
+ static struct hw_pci dw_pci = {