diff options
| author | Adrian Panella <ianchi74@outlook.com> | 2016-05-13 01:13:15 -0500 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2016-06-13 22:51:42 +0200 |
| commit | 3d067c013297f43021a8e7aec78e220c048585fb (patch) | |
| tree | 2bbd81c89ed924943ecd00a69c352a823df61675 /target/linux/ipq806x/base-files/etc | |
| parent | 2adc6468bf4537f75a519dbe3c082268b0d038a6 (diff) | |
| download | mtk-20170518-3d067c013297f43021a8e7aec78e220c048585fb.zip mtk-20170518-3d067c013297f43021a8e7aec78e220c048585fb.tar.gz mtk-20170518-3d067c013297f43021a8e7aec78e220c048585fb.tar.bz2 | |
ipq806x: base-files: add support for Linksys EA8500
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
Diffstat (limited to 'target/linux/ipq806x/base-files/etc')
5 files changed, 44 insertions, 0 deletions
diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index 392dc8b..568b482 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -27,6 +27,10 @@ r7500) ucidef_set_led_default "wps" "WPS" "r7500:white:wps" "0" ucidef_set_led_default "rfkill" "rfkill" "r7500:white:rfkill" "0" ;; +ea8500) + ucidef_set_led_wlan "wifi" "WIFI" "ea8500:green:wifi" "phy0radio" + ucidef_set_led_default "wps" "WPS" "ea8500:green:wps" "0" + ;; *) ;; esac diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index e3c9137..6796966 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -6,6 +6,7 @@ . /lib/functions/uci-defaults.sh . /lib/ipq806x.sh +. /lib/functions/system.sh board_config_update @@ -24,6 +25,14 @@ db149) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" ;; +ea8500) + + hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0t@eth0" "5:wan" "0t@eth0" + ucidef_set_interface_macaddr "lan" "$hw_mac_addr" + ucidef_set_interface_macaddr "wan" "$hw_mac_addr" + ;; *) echo "Unsupported hardware. Network interfaces not intialized" ;; diff --git a/target/linux/ipq806x/base-files/etc/diag.sh b/target/linux/ipq806x/base-files/etc/diag.sh index b19012c..6b3622d 100755 --- a/target/linux/ipq806x/base-files/etc/diag.sh +++ b/target/linux/ipq806x/base-files/etc/diag.sh @@ -8,6 +8,9 @@ get_status_led() { c2600) status_led="status:blue" ;; + ea8500) + status_led="ea8500:white:power" + ;; esac } diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 5f604e1..24da550 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -52,6 +52,10 @@ case "$FIRMWARE" in ath10kcal_extract "radio" 4096 12064 # ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1) ;; + ea8500) + hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) + ath10kcal_extract "art" 4096 12064 + ;; esac ;; "ath10k/cal-pci-0001:01:00.0.bin") @@ -60,6 +64,10 @@ case "$FIRMWARE" in ath10kcal_extract "radio" 20480 12064 # ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2) ;; + ea8500) + hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) + ath10kcal_extract "art" 20480 12064 + ;; esac ;; *) diff --git a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery b/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery new file mode 100755 index 0000000..b9ea004 --- /dev/null +++ b/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery @@ -0,0 +1,20 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2015 OpenWrt.org + +START=97 +boot() { +. /lib/functions.sh +. /lib/ipq806x.sh + +case $(ipq806x_board_name) in + ea8500) + # make sure auto_recovery in uboot is always on + AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`" + if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then + fw_setenv auto_recovery yes + fi + # reset the boot counter + mtd resetbc s_env + ;; +esac +} |