diff options
| author | Roman Yeryomin <roman@advem.lv> | 2017-10-30 01:24:26 +0200 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2017-10-30 01:24:26 +0200 |
| commit | 156f2df879fd5afbe1aee2e9d37d81e36195a59b (patch) | |
| tree | 4eca4f07e07752f9dd6633161a939bdd7332e2e9 /target/linux/ipq806x/base-files | |
| parent | a22e2bd37db28b084f01a567ef8706fefa0be667 (diff) | |
| download | mtk-20170518-156f2df879fd5afbe1aee2e9d37d81e36195a59b.zip mtk-20170518-156f2df879fd5afbe1aee2e9d37d81e36195a59b.tar.gz mtk-20170518-156f2df879fd5afbe1aee2e9d37d81e36195a59b.tar.bz2 | |
ipq806x: ipq4019: add ap-dk01.1-c1 board support
AP-DK01.1-C1 is QCA dev board with:
- ipq4018 quad core ARM @716.8MHz, 2x2 dual (11n+11ac) radio
- 256MB RAM
- 32MB SPI flash
- QCA8075 multiport ethernet phy (WAN port, 4x LAN ports)
First installation via u-boot:
sf probe
sf erase 0x180000 0x1a00000
tftpboot 0x84000000 lede-ipq806x-AP-DK01.1-C1-squashfs-sysupgrade.bin
sf write 0x84000000 0x180000 $filesize
Further upgrades via sysupgrade.
Changes:
- add partitions
- set memory size to 256MB
- add reserved memory mapping
- add correct compatible string
- add image generation
- extract pre-cal data from ART partition
Compile and run tested.
Wirespeed NAT can be achieved with spreading rx interrupts over different
cores. Wifi speed is ~550Mbps @5GHz in open air.
Note:
AP-DK01.1-C1 is fully compatible with AP-DK01.2-C1, which has
ipq4028 instead of ipq4018 on board.
Changes since v2:
- based on dts(i) rework/cleanup submitted:
http://lists.infradead.org/pipermail/lede-dev/2017-October/009596.html
- precise reserved memory mapping
- more precise description
- compatible string
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Diffstat (limited to 'target/linux/ipq806x/base-files')
| -rw-r--r-- | target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 6 | ||||
| -rw-r--r-- | target/linux/ipq806x/base-files/lib/ipq806x.sh | 3 |
2 files changed, 9 insertions, 0 deletions
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 39757eb..4c5b55b 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -47,6 +47,9 @@ board=$(board_name) case "$FIRMWARE" in "ath10k/pre-cal-ahb-a000000.wifi.bin") case "$board" in + ap-dk01.1-c1) + ath10kcal_extract "ART" 4096 12064 + ;; fritz4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") ;; @@ -54,6 +57,9 @@ case "$FIRMWARE" in ;; "ath10k/pre-cal-ahb-a800000.wifi.bin") case "$board" in + ap-dk01.1-c1) + ath10kcal_extract "ART" 20480 12064 + ;; fritz4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") ;; diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh b/target/linux/ipq806x/base-files/lib/ipq806x.sh index e8ff7ea..940c7ef 100644 --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh @@ -14,6 +14,9 @@ ipq806x_board_detect() { machine=$(cat /proc/device-tree/model) case "$machine" in + *"AP-DK01.1-C1") + name="ap-dk01.1-c1" + ;; *"AP148") name="ap148" ;; |