summaryrefslogtreecommitdiff
path: root/target/linux/ipq806x/base-files
diff options
context:
space:
mode:
authorJohn Crispin <john@phrozen.org>2018-02-21 16:17:10 +0100
committerMathias Kresin <dev@kresin.me>2018-03-14 19:04:50 +0100
commitb7f115f22a9d79bd45bfe27cfb8d491dac49feb4 (patch)
treeccd571e92f241a135503dc81a1b5a0ef66980d21 /target/linux/ipq806x/base-files
parent20d63ebc942012040e08bb815a94f40e535b9cf9 (diff)
downloadmtk-20170518-b7f115f22a9d79bd45bfe27cfb8d491dac49feb4.zip
mtk-20170518-b7f115f22a9d79bd45bfe27cfb8d491dac49feb4.tar.gz
mtk-20170518-b7f115f22a9d79bd45bfe27cfb8d491dac49feb4.tar.bz2
ipq806x: drop ipq40xx support
Signed-off-by: John Crispin <john@phrozen.org>
Diffstat (limited to 'target/linux/ipq806x/base-files')
-rwxr-xr-xtarget/linux/ipq806x/base-files/etc/board.d/01_leds8
-rwxr-xr-xtarget/linux/ipq806x/base-files/etc/board.d/02_network9
-rw-r--r--target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata29
-rw-r--r--target/linux/ipq806x/base-files/lib/upgrade/openmesh.sh110
-rw-r--r--target/linux/ipq806x/base-files/lib/upgrade/platform.sh5
5 files changed, 0 insertions, 161 deletions
diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
index ea8b781..98aac70 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
@@ -11,14 +11,6 @@ board=$(board_name)
boardname="${board##*,}"
case "$board" in
-avm,fritzbox-4040)
- ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
- ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
- ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
- ;;
-glinet,gl-b1300)
- ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:green:wlan" "phy0tpt"
- ;;
netgear,d7800 |\
netgear,r7500 |\
netgear,r7500v2 |\
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 74223e5..e279cdd 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -12,11 +12,6 @@ board_config_update
board=$(board_name)
case "$board" in
-avm,fritzbox-4040)
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" \
- "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
- ;;
linksys,ea8500)
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ucidef_add_switch "switch0" \
@@ -33,10 +28,6 @@ tplink,vr2600v)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
;;
-glinet,gl-b1300 |\
-openmesh,a42)
- ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ;;
qcom,ipq8064-db149)
ucidef_set_interface_lan "eth1 eth2 eth3"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index fa8eb11..ed99bd5 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -45,35 +45,6 @@ board=$(board_name)
case "$FIRMWARE" in
-"ath10k/pre-cal-ahb-a000000.wifi.bin")
- case "$board" in
- avm,fritzbox-4040)
- /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
- ;;
- openmesh,a42)
- ath10kcal_extract "0:ART" 4096 12064
- ;;
- glinet,gl-b1300 |\
- qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 4096 12064
- ;;
- esac
- ;;
-"ath10k/pre-cal-ahb-a800000.wifi.bin")
- case "$board" in
- avm,fritzbox-4040)
- /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
- ;;
- openmesh,a42)
- ath10kcal_extract "0:ART" 20480 12064
- ;;
- glinet,gl-b1300 |\
- qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 20480 12064
- ;;
- esac
- ;;
-
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case $board in
linksys,ea8500)
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/openmesh.sh b/target/linux/ipq806x/base-files/lib/upgrade/openmesh.sh
deleted file mode 100644
index a2c79d9..0000000
--- a/target/linux/ipq806x/base-files/lib/upgrade/openmesh.sh
+++ /dev/null
@@ -1,110 +0,0 @@
-# The U-Boot loader of the OpenMesh devices requires image sizes and
-# checksums to be provided in the U-Boot environment.
-# The OpenMesh devices come with 2 main partitions - while one is active
-# sysupgrade will flash the other. The boot order is changed to boot the
-# newly flashed partition. If the new partition can't be booted due to
-# upgrade failures the previously used partition is loaded.
-
-platform_do_upgrade_openmesh() {
- local tar_file="$1"
- local restore_backup
- local primary_kernel_mtd
-
- local setenv_script="/tmp/fw_env_upgrade"
-
- local kernel_mtd="$(find_mtd_index $PART_NAME)"
- local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)"
- local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)"
-
- # detect to which flash region the new image is written to.
- #
- # 1. check what is the mtd index for the first flash region on this
- # device
- # 2. check if the target partition ("inactive") has the mtd index of
- # the first flash region
- #
- # - when it is: the new bootseq will be 1,2 and the first region is
- # modified
- # - when it isnt: bootseq will be 2,1 and the second region is
- # modified
- #
- # The detection has to be done via the hardcoded mtd partition because
- # the current boot might be done with the fallback region. Let us
- # assume that the current bootseq is 1,2. The bootloader detected that
- # the image in flash region 1 is corrupt and thus switches to flash
- # region 2. The bootseq in the u-boot-env is now still the same and
- # the sysupgrade code can now only rely on the actual mtd indexes and
- # not the bootseq variable to detect the currently booted flash
- # region/image.
- #
- # In the above example, an implementation which uses bootseq ("1,2") to
- # detect the currently booted image would assume that region 1 is booted
- # and then overwrite the variables for the wrong flash region (aka the
- # one which isn't modified). This could result in a device which doesn't
- # boot anymore to Linux until it was reflashed with ap51-flash.
- local next_boot_part="1"
- case "$(board_name)" in
- openmesh,a42)
- primary_kernel_mtd=8
- ;;
- *)
- echo "failed to detect primary kernel mtd partition for board"
- return 1
- ;;
- esac
- [ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
-
- local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
- board_dir=${board_dir%/}
-
- local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
- local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
- # rootfs without EOF marker
- rootfs_length=$((rootfs_length-4))
-
- local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
- # md5 checksum of rootfs with EOF marker
- local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
-
- #
- # add tar support to get_image() to use default_do_upgrade() instead?
- #
-
- # take care of restoring a saved config
- [ "$SAVE_CONFIG" -eq 1 ] && restore_backup="${MTD_CONFIG_ARGS} -j ${CONF_TAR}"
-
- # write concatinated kernel + rootfs to flash
- tar xf $tar_file ${board_dir}/kernel ${board_dir}/root -O | \
- mtd $restore_backup write - $PART_NAME
-
- # prepare new u-boot env
- if [ "$next_boot_part" = "1" ]; then
- echo "bootseq 1,2" > $setenv_script
- else
- echo "bootseq 2,1" > $setenv_script
- fi
-
- printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script
- printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script
- printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
- printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
-
- printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script
- printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script
- printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
- printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
-
- # store u-boot env changes
- fw_setenv -s $setenv_script || {
- echo "failed to update U-Boot environment"
- return 1
- }
-}
-
-# create /var/lock for the lock "fw_setenv.lock" of fw_setenv
-# the rest is copied using ipq806x's RAMFS_COPY_BIN and RAMFS_COPY_DATA
-platform_add_ramfs_ubootenv()
-{
- mkdir -p $RAM_ROOT/var/lock
-}
-append sysupgrade_pre_upgrade platform_add_ramfs_ubootenv
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index 5561dd5..c0deeda 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -17,15 +17,10 @@ platform_do_upgrade() {
netgear,r7500 |\
netgear,r7500v2 |\
netgear,r7800 |\
- qcom,ap-dk04.1-c1 |\
qcom,ipq8064-ap148 |\
zyxel,nbg6817)
nand_do_upgrade "$ARGV"
;;
- openmesh,a42)
- PART_NAME="inactive"
- platform_do_upgrade_openmesh "$ARGV"
- ;;
tplink,c2600)
PART_NAME="os-image:rootfs"
MTD_CONFIG_ARGS="-s 0x200000"