ipq806x: clean up dts files

Set the pinmux to the values found in the GPL tarballs of the boards.
Remove pinmux which are is not used (like nand pinmux for spi
flash boards).

This allows to use the wan orange led of the C2600 which had a wrong
pinmux before. Might fix buttons or leds of other boards as well.

Fix the LED color and the ledswitch key code of the C2600. Rename the
ledgnr to ledswitch.

Add support for indication the boot state using LEDs to the D7800,
NBG6817, R7500 and R7500v2.

Change GPIO active to readable values in D7800, EA8500, R7500,
R7500v2 and R7800.

Change gpioexport to gpio pinmux.

Add proper "drive strenght" to i2c4_pins and use it for RPM on
C2600, D7800, EA8500, R7500, R7500v2.

Remove pcie pinmux from D7800.

Move pinctrl to correct place in NBG6817 and R7800.

Signed-off-by: Henryk Heisig <hyniu@o2.pl>

8 files changed, 532 insertions, 283 deletions

diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
index 9162200..f22838f 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
@@ -1,4 +1,5 @@
 #include "qcom-ipq8064-v1.0.dtsi"
+
 #include <dt-bindings/input/input.h>
 
 / {
@@ -25,9 +26,9 @@
 		mdio-gpio0 = &mdio0;
 
 		led-boot = &power;
-		led-failsafe = &ledgnr;
+		led-failsafe = &general;
 		led-running = &power;
-		led-upgrade = &ledgnr;
+		led-upgrade = &general;
 	};
 
 	chosen {
@@ -36,10 +37,32 @@
 
 	soc {
 		pinmux@800000 {
+			button_pins: button_pins {
+				mux {
+					pins = "gpio16", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
 			i2c4_pins: i2c4_pinmux {
-				pins = "gpio12", "gpio13";
-				function = "gsbi4";
-				bias-disable;
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			led_pins: led_pins {
+				mux {
+					pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
+					       "gpio53", "gpio66";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
 			};
 
 			spi_pins: spi_pins {
@@ -56,6 +79,7 @@
 
 				cs {
 					pins = "gpio20";
+					function = "gpio";
 					drive-strength = <10>;
 					bias-pull-up;
 				};
@@ -66,31 +90,6 @@
 				};
 			};
 
-			nand_pins: nand_pins {
-				mux {
-					pins = "gpio34", "gpio35", "gpio36",
-					       "gpio37", "gpio38", "gpio39",
-					       "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				pullups {
-					pins = "gpio39";
-					bias-pull-up;
-				};
-
-				hold {
-					pins = "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					bias-bus-hold;
-				};
-			};
-
 			mdio0_pins: mdio0_pins {
 				mux {
 					pins = "gpio0", "gpio1";
@@ -109,6 +108,26 @@
 					bias-disable;
 				};
 			};
+
+			usb0_pwr_en_pin: usb0_pwr_en_pin {
+				mux {
+					pins = "gpio25";
+					function = "gpio";
+					drive-strength = <10>;
+					bias-pull-up;
+					output-high;
+				};
+			};
+
+			usb1_pwr_en_pin: usb1_pwr_en_pin {
+				mux {
+					pins = "gpio23";
+					function = "gpio";
+					drive-strength = <10>;
+					bias-pull-up;
+					output-high;
+				};
+			};
 		};
 
 		gsbi@16300000 {
@@ -314,10 +333,16 @@
 
 		usb30@0 {
 			status = "ok";
+
+			pinctrl-0 = <&usb0_pwr_en_pin>;
+			pinctrl-names = "default";
 		};
 
 		usb30@1 {
 			status = "ok";
+
+			pinctrl-0 = <&usb1_pwr_en_pin>;
+			pinctrl-names = "default";
 		};
 
 		pcie0: pci@1b500000 {
@@ -387,10 +412,17 @@
 				full-duplex;
 			};
 		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
 
 		wifi {
 			label = "wifi";
@@ -410,15 +442,17 @@
 			linux,code = <KEY_WPS_BUTTON>;
 		};
 
-                ledgeneral {
-			label = "ledgeneral";
+		ledswitch {
+			label = "ledswitch";
 			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_DOLLAR>;
+			linux,code = <KEY_LIGHTS_TOGGLE>;
 		};
 	};
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
 
 		lan {
 			label = "c2600:white:lan";
@@ -441,7 +475,7 @@
 		};
 
 		wan_red {
-			label = "c2600:red:wan";
+			label = "c2600:orange:wan";
 			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
 		};
 
@@ -453,29 +487,14 @@
 		power: status {
 			label = "c2600:white:status";
 			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
 		};
 
-		ledgnr: ledgnr {
-			label = "c2600:white:ledgnr";
+		general: general {
+			label = "c2600:white:general";
 			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		usb1_power {
-			gpio-export,name = "usb1_power";
-			gpio-export,output = <1>;
-			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
-		};
-		usb2_power {
-			gpio-export,name = "usb2_power";
-			gpio-export,output = <1>;
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &adm_dma {
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
index 4dd7a32..4af56ba 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
@@ -24,6 +24,11 @@
 	aliases {
 		serial0 = &uart4;
 		mdio-gpio0 = &mdio0;
+
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
 	};
 
 	chosen {
@@ -33,26 +38,39 @@
 
 	soc {
 		pinmux@800000 {
-			i2c4_pins: i2c4_pinmux {
-				pins = "gpio12", "gpio13";
-				function = "gsbi4";
-				bias-disable;
+			button_pins: button_pins {
+				mux {
+					pins = "gpio6", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
 			};
 
-			pcie0_pins: pcie0_pinmux {
+			i2c4_pins: i2c4_pinmux {
 				mux {
-					pins = "gpio3";
-					function = "pcie1_rst";
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
 					drive-strength = <12>;
 					bias-disable;
 				};
 			};
 
-			pcie1_pins: pcie1_pinmux {
+			led_pins: led_pins {
 				mux {
-					pins = "gpio48";
-					function = "pcie2_rst";
-					drive-strength = <12>;
+					pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+						"gpio24","gpio26", "gpio53", "gpio64", "gpio67";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
 					bias-disable;
 				};
 			};
@@ -80,15 +98,6 @@
 				};
 			};
 
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
 			rgmii2_pins: rgmii2_pins {
 				mux {
 					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
@@ -98,6 +107,26 @@
 					bias-disable;
 				};
 			};
+
+			usb0_pwr_en_pins: usb0_pwr_en_pins {
+				mux {
+					pins = "gpio15";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
+
+			usb1_pwr_en_pins: usb1_pwr_en_pins {
+				mux {
+					pins = "gpio16", "gpio68";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
 		};
 
 		gsbi@16300000 {
@@ -140,22 +169,28 @@
 
 		usb30@0 {
 			status = "ok";
+
+			pinctrl-0 = <&usb0_pwr_en_pins>;
+			pinctrl-names = "default";
 		};
 
 		usb30@1 {
 			status = "ok";
+
+			pinctrl-0 = <&usb1_pwr_en_pins>;
+			pinctrl-names = "default";
 		};
 
 		pcie0: pci@1b500000 {
 			status = "ok";
-			reset-gpio = <&qcom_pinmux 3 0>;
+			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&pcie0_pins>;
 			pinctrl-names = "default";
 		};
 
 		pcie1: pci@1b700000 {
 			status = "ok";
-			reset-gpio = <&qcom_pinmux 48 0>;
+			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&pcie1_pins>;
 			pinctrl-names = "default";
 		};
@@ -228,14 +263,13 @@
 				label = "firmware";
 				reg = <0x1480000 0x2000000>;
 			};
-
 		};
 
 		mdio0: mdio {
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 
@@ -283,82 +317,91 @@
 				full-duplex;
 			};
 		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
 
 		wifi {
 			label = "wifi";
-			gpios = <&qcom_pinmux 6 1>;
-			linux,code = <KEY_WLAN>;
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
 		};
 
 		reset {
 			label = "reset";
-			gpios = <&qcom_pinmux 54 1>;
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 		};
 
 		wps {
 			label = "wps";
-			gpios = <&qcom_pinmux 65 1>;
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WPS_BUTTON>;
 		};
 	};
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
 
 		usb1 {
 			label = "d7800:amber:usb1";
-			gpios = <&qcom_pinmux 7 0>;
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 		};
 
 		usb3 {
 			label = "d7800:amber:usb3";
-			gpios = <&qcom_pinmux 8 0>;
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 		};
 
 		status {
 			label = "d7800:amber:status";
-			gpios = <&qcom_pinmux 9 0>;
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 		};
 
 		internet {
 			label = "d7800:white:internet";
-			gpios = <&qcom_pinmux 22 0>;
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
 		};
 
 		wan {
 			label = "d7800:white:wan";
-			gpios = <&qcom_pinmux 23 0>;
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 		};
 
 		wps {
 			label = "d7800:white:wps";
-			gpios = <&qcom_pinmux 24 0>;
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 		};
 
 		esata {
 			label = "d7800:white:esata";
-			gpios = <&qcom_pinmux 26 0>;
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 		};
 
-		power {
+		power: power {
 			label = "d7800:white:power";
-			gpios = <&qcom_pinmux 53 0>;
-			default-state = "on";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
 		};
 
 		rfkill {
 			label = "d7800:white:rfkill";
-			gpios = <&qcom_pinmux 64 0>;
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 		};
 
 		wifi5g {
 			label = "d7800:white:wifi5g";
-			gpios = <&qcom_pinmux 67 0>;
+			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
index 96e4acf..b5840e8 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
@@ -39,20 +39,42 @@
 
 	soc {
 		pinmux@800000 {
+			button_pins: button_pins {
+				mux {
+					pins = "gpio65", "gpio67", "gpio68";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
 			i2c4_pins: i2c4_pinmux {
-				pins = "gpio12", "gpio13";
-				function = "gsbi4";
-				bias-disable;
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
 			};
 
-			spi_pins: spi_pins {
+			led_pins: led_pins {
 				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					drive-strength = <10>;
-					bias-none;
+					pins = "gpio6", "gpio53", "gpio54";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
 				};
 			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
 			nand_pins: nand_pins {
 				mux {
 					pins = "gpio34", "gpio35", "gpio36",
@@ -76,15 +98,6 @@
 				};
 			};
 
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
 			rgmii2_pins: rgmii2_pins {
 				mux {
 					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
@@ -94,9 +107,6 @@
 					bias-disable;
 				};
 			};
-			
-			
-			
 		};
 
 		gsbi@16300000 {
@@ -207,7 +217,7 @@
 				reg = <0x0660000 0x0120000>;
 				read-only;
 			};
-			
+
 			TZ@780000 {
 				label = "TZ";
 				reg = <0x0780000 0x0280000>;
@@ -231,54 +241,53 @@
 				reg = <0x0dc0000 0x0100000>;
 				read-only;
 			};
-			
+
 			u_env@ec0000 {
 				label = "u_env";
 				reg = <0x0ec0000 0x0040000>;
 			};
-			
+
 			s_env@f00000 {
 				label = "s_env";
 				reg = <0x0f00000 0x0040000>;
 			};
-			
+
 			devinfo@f40000 {
 				label = "devinfo";
 				reg = <0x0f40000 0x0040000>;
 			};
-			
+
 			linux@f80000 { 
 				label = "kernel1";
 				reg = <0x0f80000 0x2800000>;  /* 3 MB spill to rootfs*/
 			};
-			
+
 			rootfs@1280000 {
 				label = "rootfs1";
 				reg = <0x1280000 0x2500000>;
 			};
-			
+
 			linux2@3780000 {
 				label = "kernel2";
 				reg = <0x3780000 0x2800000>;
 			};
-			
+
 			rootfs2@3a80000 {
 				label = "rootfs2";
 				reg = <0x3a80000 0x2500000>;
 			};
-			
+
 			syscfg@5f80000 {
 				label = "syscfg";
 				reg = <0x5f80000 0x2080000>;
 			};
-
 		};
 
 		mdio0: mdio {
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 
@@ -332,17 +341,23 @@
 			};
 		};
 
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
+
 		adm_dma: dma@18300000 {
 			status = "ok";
 		};
-
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
 
-		rfkill {
-			label = "rfkill"; /* WIFI on-off*/
+		wifi {
+			label = "wifi";
 			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RFKILL>;
 		};
@@ -358,29 +373,27 @@
 			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WPS_BUTTON>;
 		};
-
 	};
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
 
 		wps {
 			label = "ea8500:green:wps";
-			gpios = <&qcom_pinmux 53 0>;
-			default-state = "off";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 		};
 
 		power: power {
 			label = "ea8500:white:power";
-			gpios = <&qcom_pinmux 6 1>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
 		};
 
 		wifi {
 			label = "ea8500:green:wifi";
-			gpios = <&qcom_pinmux 54 0>;
-			default-state = "off";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
index 2ecd493..7fcbb0c 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
@@ -24,6 +24,11 @@
 	aliases {
 		serial0 = &uart4;
 		mdio-gpio0 = &mdio0;
+
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
 	};
 
 	chosen {
@@ -33,10 +38,41 @@
 
 	soc {
 		pinmux@800000 {
+			button_pins: button_pins {
+				mux {
+					pins = "gpio6", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
 			i2c4_pins: i2c4_pinmux {
-				pins = "gpio12", "gpio13";
-				function = "gsbi4";
-				bias-disable;
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			led_pins: led_pins {
+				mux {
+					pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+						"gpio24","gpio26", "gpio53", "gpio64", "gpio67";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
 			};
 
 			nand_pins: nand_pins {
@@ -62,15 +98,6 @@
 				};
 			};
 
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
 			rgmii2_pins: rgmii2_pins {
 				mux {
 					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
@@ -205,7 +232,7 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 
@@ -257,82 +284,91 @@
 				full-duplex;
 			};
 		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
 
 		wifi {
 			label = "wifi";
-			gpios = <&qcom_pinmux 6 1>;
-			linux,code = <KEY_WLAN>;
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
 		};
 
 		reset {
 			label = "reset";
-			gpios = <&qcom_pinmux 54 1>;
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 		};
 
 		wps {
 			label = "wps";
-			gpios = <&qcom_pinmux 65 1>;
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WPS_BUTTON>;
 		};
 	};
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
 
 		usb1 {
 			label = "r7500:amber:usb1";
-			gpios = <&qcom_pinmux 7 0>;
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 		};
 
 		usb3 {
 			label = "r7500:amber:usb3";
-			gpios = <&qcom_pinmux 8 0>;
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 		};
 
 		status {
 			label = "r7500:amber:status";
-			gpios = <&qcom_pinmux 9 0>;
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 		};
 
 		internet {
 			label = "r7500:white:internet";
-			gpios = <&qcom_pinmux 22 0>;
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
 		};
 
 		wan {
 			label = "r7500:white:wan";
-			gpios = <&qcom_pinmux 23 0>;
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 		};
 
 		wps {
 			label = "r7500:white:wps";
-			gpios = <&qcom_pinmux 24 0>;
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 		};
 
 		esata {
 			label = "r7500:white:esata";
-			gpios = <&qcom_pinmux 26 0>;
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 		};
 
-		power {
+		power: power {
 			label = "r7500:white:power";
-			gpios = <&qcom_pinmux 53 0>;
-			default-state = "on";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
 		};
 
 		rfkill {
 			label = "r7500:white:rfkill";
-			gpios = <&qcom_pinmux 64 0>;
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 		};
 
 		wifi5g {
 			label = "r7500:white:wifi5g";
-			gpios = <&qcom_pinmux 67 0>;
+			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
index 869712d..67af68e 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
@@ -29,6 +29,11 @@
 	aliases {
 		serial0 = &uart4;
 		mdio-gpio0 = &mdio0;
+
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
 	};
 
 	chosen {
@@ -38,10 +43,41 @@
 
 	soc {
 		pinmux@800000 {
+			button_pins: button_pins {
+				mux {
+					pins = "gpio6", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
 			i2c4_pins: i2c4_pinmux {
-				pins = "gpio12", "gpio13";
-				function = "gsbi4";
-				bias-disable;
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			led_pins: led_pins {
+				mux {
+					pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+						"gpio24","gpio26", "gpio53", "gpio64";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
 			};
 
 			nand_pins: nand_pins {
@@ -67,15 +103,6 @@
 				};
 			};
 
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
 			rgmii2_pins: rgmii2_pins {
 				mux {
 					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
@@ -85,6 +112,26 @@
 					bias-disable;
 				};
 			};
+
+			usb0_pwr_en_pins: usb0_pwr_en_pins {
+				mux {
+					pins = "gpio15";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
+
+			usb1_pwr_en_pins: usb1_pwr_en_pins {
+				mux {
+					pins = "gpio16", "gpio68";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
 		};
 
 		gsbi@16300000 {
@@ -127,10 +174,16 @@
 
 		usb30@0 {
 			status = "ok";
+
+			pinctrl-0 = <&usb0_pwr_en_pins>;
+			pinctrl-names = "default";
 		};
 
 		usb30@1 {
 			status = "ok";
+
+			pinctrl-0 = <&usb1_pwr_en_pins>;
+			pinctrl-names = "default";
 		};
 
 		pcie0: pci@1b500000 {
@@ -222,7 +275,7 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 
@@ -274,79 +327,87 @@
 				full-duplex;
 			};
 		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
 
 		wifi {
 			label = "wifi";
-			gpios = <&qcom_pinmux 6 1>;
-			linux,code = <KEY_WLAN>;
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
 		};
 
 		reset {
 			label = "reset";
-			gpios = <&qcom_pinmux 54 1>;
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 		};
 
 		wps {
 			label = "wps";
-			gpios = <&qcom_pinmux 65 1>;
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WPS_BUTTON>;
 		};
 	};
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
 
 		usb1 {
 			label = "r7500v2:amber:usb1";
-			gpios = <&qcom_pinmux 7 0>;
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 		};
 
 		usb3 {
 			label = "r7500v2:amber:usb3";
-			gpios = <&qcom_pinmux 8 0>;
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 		};
 
 		status {
 			label = "r7500v2:amber:status";
-			gpios = <&qcom_pinmux 9 0>;
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 		};
 
 		internet {
 			label = "r7500v2:white:internet";
-			gpios = <&qcom_pinmux 22 0>;
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
 		};
 
 		wan {
 			label = "r7500v2:white:wan";
-			gpios = <&qcom_pinmux 23 0>;
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 		};
 
 		wps {
 			label = "r7500v2:white:wps";
-			gpios = <&qcom_pinmux 24 0>;
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 		};
 
 		esata {
 			label = "r7500v2:white:esata";
-			gpios = <&qcom_pinmux 26 0>;
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 		};
 
-		power {
+		power: power {
 			label = "r7500v2:white:power";
-			gpios = <&qcom_pinmux 53 0>;
-			default-state = "on";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
 		};
 
 		rfkill {
 			label = "r7500v2:white:rfkill";
-			gpios = <&qcom_pinmux 64 0>;
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 		};
-
 	};
 };
 
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
index e03adc1..ec0aa0c 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
@@ -38,11 +38,13 @@
 	soc {
 		pinmux@800000 {
 			led_pins: led_pins {
-				pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
-					"gpio26", "gpio53", "gpio56", "gpio66";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-up;
+				mux {
+					pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
+						"gpio26", "gpio53", "gpio56", "gpio66";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
 			};
 
 			i2c4_pins: i2c4_pinmux {
@@ -55,10 +57,12 @@
 			};
 
 			button_pins: button_pins {
-				pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-up;
+				mux {
+					pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
 			};
 
 			spi_pins: spi_pins {
@@ -103,7 +107,6 @@
 					bias-disable;
 				};
 			};
-
 		};
 
 		gsbi@16300000 {
@@ -227,7 +230,6 @@
 						reg = <0xfc0000 0x40000>;
 						read-only;
 					};
-
 				};
 			};
 		};
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
index cc56213..d23d57a 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
@@ -25,6 +25,11 @@
 		serial0 = &uart4;
 		mdio-gpio0 = &mdio0;
 		sdcc1 = &sdcc1;
+
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
 	};
 
 	chosen {
@@ -34,8 +39,14 @@
 
 	soc {
 		pinmux@800000 {
-			pinctrl-0 = <&mdio0_pins &rgmii2_pins>;
-			pinctrl-names = "default";
+			button_pins: button_pins {
+				mux {
+					pins = "gpio6", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 
 			i2c4_pins: i2c4_pinmux {
 				mux {
@@ -46,6 +57,22 @@
 				};
 			};
 
+			led_pins: led_pins {
+				off {
+					pins = "gpio26", "gpio33", "gpio64";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				on {
+					pins = "gpio9";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
 			mdio0_pins: mdio0_pins {
 				mux {
 					pins = "gpio0", "gpio1";
@@ -88,6 +115,42 @@
 					drive-strength = <12>;
 				};
 			};
+
+			usb0_pwr_en_pins: usb0_pwr_en_pins {
+				pwr {
+					pins = "gpio14";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+
+				ovc {
+					pins = "gpio15";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-up;
+					output-high;
+				};
+			};
+
+			usb1_pwr_en_pins: usb1_pwr_en_pins {
+				pwr {
+					pins = "gpio17";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+
+				ovc {
+					pins = "gpio16";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-up;
+					output-high;
+				};
+			};
 		};
 
 		gsbi@16300000 {
@@ -146,10 +209,16 @@
 
 		usb30@0 {
 			status = "ok";
+
+			pinctrl-0 = <&usb0_pwr_en_pins>;
+			pinctrl-names = "default";
 		};
 
 		usb30@1 {
 			status = "ok";
+
+			pinctrl-0 = <&usb1_pwr_en_pins>;
+			pinctrl-names = "default";
 		};
 
 		pcie0: pci@1b500000 {
@@ -170,7 +239,9 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_LOW &qcom_pinmux 0 GPIO_ACTIVE_LOW>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
 
 			phy0: ethernet-phy@0 {
 				device_type = "ethernet-phy";
@@ -222,6 +293,9 @@
 			qcom,irq = <255>;
 			mdiobus = <&mdio0>;
 
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+
 			fixed-link {
 				speed = <1000>;
 				full-duplex;
@@ -253,18 +327,18 @@
 
 		amba {
 			sdcc1: sdcc@12400000 {
-				status          = "okay";
-                                dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-                                dma-names = "tx", "rx";
+				status = "okay";
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
 			};
 		};
-
-
-
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
 		wifi {
 			label = "wifi";
 			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
@@ -286,15 +360,17 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
 		internet {
 			label = "nbg6817:white:internet";
 			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 		};
 
-		power {
+		power: power {
 			label = "nbg6817:white:power";
 			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
 		};
 
 		wifi {
@@ -307,33 +383,6 @@
 			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		usb0_status {
-			gpio-export,name = "usb0";
-			gpio-export,output = <1>;
-			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb1_status {
-			gpio-export,name = "usb1";
-			gpio-export,output = <1>;
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
-		};
-		usb1_power {
-			gpio-export,name = "usb1_power";
-			gpio-export,output = <1>;
-			gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
-		};
-		usb2_power {
-			gpio-export,name = "usb2_power";
-			gpio-export,output = <1>;
-			gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &adm_dma {
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
index 8566995..42d6e2b 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
@@ -42,8 +42,14 @@
 
 	soc {
 		pinmux@800000 {
-			pinctrl-0 = <&mdio0_pins &rgmii2_pins>;
-			pinctrl-names = "default";
+			button_pins: button_pins {
+				mux {
+					pins = "gpio6", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 
 			i2c4_pins: i2c4_pinmux {
 				mux {
@@ -54,6 +60,14 @@
 				};
 			};
 
+			led_pins: led_pins {
+				pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+					"gpio24","gpio26", "gpio53", "gpio64", "gpio67";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			nand_pins: nand_pins {
 				mux {
 					pins = "gpio34", "gpio35", "gpio36",
@@ -165,6 +179,26 @@
 					output-high;
 				};
 			};
+
+			usb0_pwr_en_pins: usb0_pwr_en_pins {
+				mux {
+					pins = "gpio15";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
+
+			usb1_pwr_en_pins: usb1_pwr_en_pins {
+				mux {
+					pins = "gpio16", "gpio68";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
 		};
 
 		gsbi@16300000 {
@@ -191,7 +225,7 @@
 				pinctrl-0 = <&spi_pins>;
 				pinctrl-names = "default";
 
-				cs-gpios = <&qcom_pinmux 20 0>;
+				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
 
 				flash: m25p80@0 {
 					compatible = "jedec,spi-nor";
@@ -214,7 +248,7 @@
 				pinctrl-0 = <&spi6_pins>;
 				pinctrl-names = "default";
 
-				cs-gpios = <&qcom_pinmux 57 0>;
+				cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
 
 				spi-nor@0 {
 					compatible = "spi-nor";
@@ -251,10 +285,16 @@
 
 		usb30@0 {
 			status = "ok";
+
+			pinctrl-0 = <&usb0_pwr_en_pins>;
+			pinctrl-names = "default";
 		};
 
 		usb30@1 {
 			status = "ok";
+
+			pinctrl-0 = <&usb1_pwr_en_pins>;
+			pinctrl-names = "default";
 		};
 
 		pcie0: pci@1b500000 {
@@ -336,14 +376,16 @@
 				label = "firmware";
 				reg = <0x1480000 0x2000000>;
 			};
-
 		};
 
 		mdio0: mdio {
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
 
 			phy0: ethernet-phy@0 {
 				device_type = "ethernet-phy";
@@ -399,6 +441,9 @@
 			qcom,irq = <255>;
 			mdiobus = <&mdio0>;
 
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+
 			mtd-mac-address = <&art 6>;
 
 			fixed-link {
@@ -435,10 +480,12 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
 
 		wifi {
 			label = "wifi";
-			gpios = <&qcom_pinmux 6 1>;
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RFKILL>;
 			debounce-interval = <60>;
 			wakeup-source;
@@ -446,7 +493,7 @@
 
 		reset {
 			label = "reset";
-			gpios = <&qcom_pinmux 54 1>;
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 			debounce-interval = <60>;
 			wakeup-source;
@@ -454,7 +501,7 @@
 
 		wps {
 			label = "wps";
-			gpios = <&qcom_pinmux 65 1>;
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WPS_BUTTON>;
 			debounce-interval = <60>;
 			wakeup-source;
@@ -463,79 +510,58 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
 
 		power_white: power_white {
 			label = "r7800:white:power";
-			gpios = <&qcom_pinmux 53 0>;
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
 		power_amber: power_amber {
 			label = "r7800:amber:power";
-			gpios = <&qcom_pinmux 9 0>;
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 		};
 
 		wan_white {
 			label = "r7800:white:wan";
-			gpios = <&qcom_pinmux 22 0>;
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
 		};
 
 		wan_amber {
 			label = "r7800:amber:wan";
-			gpios = <&qcom_pinmux 23 0>;
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 		};
 
 		usb1 {
 			label = "r7800:white:usb1";
-			gpios = <&qcom_pinmux 7 0>;
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 		};
 
 		usb2 {
 			label = "r7800:white:usb2";
-			gpios = <&qcom_pinmux 8 0>;
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 		};
 
 		esata {
 			label = "r7800:white:esata";
-			gpios = <&qcom_pinmux 26 0>;
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 		};
 
 		rfkill {
 			label = "r7800:white:rfkill";
-			gpios = <&qcom_pinmux 64 0>;
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 		};
 
 		wps {
 			label = "r7800:white:wps";
-			gpios = <&qcom_pinmux 24 0>;
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 		};
 
 		wifi {
 			label = "r7800:white:wifi";
-			gpios = <&qcom_pinmux 67 0>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		usb1-power {
-			gpio-export,name = "usb1";
-			gpio-export,output = <1>;
-			gpios = <&qcom_pinmux 15 0>;
-		};
-
-		usb2-power {
-			gpio-export,name = "usb2";
-			gpio-export,output = <1>;
-			gpios = <&qcom_pinmux 16 0>;
-		};
-
-		usb-power {
-			gpio-export,name = "usb_p";
-			gpio-export,output = <1>;
-			gpios = <&qcom_pinmux 68 0>;
+			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };