ipq806x: Add support for linux-4.4

1)Changes

- Rebased the patches for linux-4.4.7
- Added patch to fix spi nor fifo and dma support
- Added patch to configure watchdog barktime

2)Testing

Tested on IPQ AP148 Board:
 a. NOR boot and NAND boot
 b. ethernet network and ath10k wifi
 c. ubi sysupgrade

UnTested
 dwc3 usb has not been validated on IPQ board(AP148)

3)Known Issues:
 Once we flash ubi image on AP148, and if we reset the board, uboot on
 first boot creates PEB and LEB for dynamic sized partitions, which is incorrect
 and not what linux expects which causes errors when trying to mount rootfs.
 In order to test this, we can use the below steps:
  a. Flash the ubi image on board and don't reset the board
  b. load the kernel fit image in RAM and boot from there.

Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>

1 files changed, 0 insertions, 67 deletions

diff --git a/target/linux/ipq806x/patches-3.18/011-watchdog-qcom-use-timer-devicetree-binding.patch b/target/linux/ipq806x/patches-3.18/011-watchdog-qcom-use-timer-devicetree-binding.patch
deleted file mode 100644
index 68489a8..0000000
--- a/target/linux/ipq806x/patches-3.18/011-watchdog-qcom-use-timer-devicetree-binding.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From fded70251b1b58f68de1d3757ece9965f0b75452 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Thu, 19 Feb 2015 20:19:30 -0800
-Subject: [PATCH 1/3] watchdog: qcom: use timer devicetree binding
-
-MSM watchdog configuration happens in the same register block as the
-timer, so we'll use the same binding as the existing timer.
-
-The qcom-wdt will now be probed when devicetree has an entry compatible
-with "qcom,kpss-timer" or "qcom-scss-timer".
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- drivers/watchdog/qcom-wdt.c | 21 +++++++++++++++------
- 1 file changed, 15 insertions(+), 6 deletions(-)
-
---- a/drivers/watchdog/qcom-wdt.c
-+++ b/drivers/watchdog/qcom-wdt.c
-@@ -20,9 +20,9 @@
- #include <linux/reboot.h>
- #include <linux/watchdog.h>
- 
--#define WDT_RST		0x0
--#define WDT_EN		0x8
--#define WDT_BITE_TIME	0x24
-+#define WDT_RST		0x38
-+#define WDT_EN		0x40
-+#define WDT_BITE_TIME	0x5C
- 
- struct qcom_wdt {
- 	struct watchdog_device	wdd;
-@@ -117,6 +117,8 @@ static int qcom_wdt_probe(struct platfor
- {
- 	struct qcom_wdt *wdt;
- 	struct resource *res;
-+	struct device_node *np = pdev->dev.of_node;
-+	u32 percpu_offset;
- 	int ret;
- 
- 	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
-@@ -124,6 +126,14 @@ static int qcom_wdt_probe(struct platfor
- 		return -ENOMEM;
- 
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+	/* We use CPU0's DGT for the watchdog */
-+	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
-+		percpu_offset = 0;
-+
-+	res->start += percpu_offset;
-+	res->end += percpu_offset;
-+
- 	wdt->base = devm_ioremap_resource(&pdev->dev, res);
- 	if (IS_ERR(wdt->base))
- 		return PTR_ERR(wdt->base);
-@@ -203,9 +213,8 @@ static int qcom_wdt_remove(struct platfo
- }
- 
- static const struct of_device_id qcom_wdt_of_table[] = {
--	{ .compatible = "qcom,kpss-wdt-msm8960", },
--	{ .compatible = "qcom,kpss-wdt-apq8064", },
--	{ .compatible = "qcom,kpss-wdt-ipq8064", },
-+	{ .compatible = "qcom,kpss-timer" },
-+	{ .compatible = "qcom,scss-timer" },
- 	{ },
- };
- MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);