ipq806x: update bleeding-edge kernel from 4.0 to 4.1

Default kernel doesn't change and stays on 3.18 for now.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46554

1 files changed, 0 insertions, 64 deletions

diff --git a/target/linux/ipq806x/patches-4.0/703-stmmac-add-fixed-link-device-tree-support.patch b/target/linux/ipq806x/patches-4.0/703-stmmac-add-fixed-link-device-tree-support.patch
deleted file mode 100644
index 4b2c9b5..0000000
--- a/target/linux/ipq806x/patches-4.0/703-stmmac-add-fixed-link-device-tree-support.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 3a95f75867be562cb919ff23a738f70357188fbd Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Fri, 8 May 2015 16:02:03 -0700
-Subject: [PATCH 3/8] stmmac: add fixed-link device-tree support
-
-In case DT is used, this change adds the ability to the stmmac driver to
-detect a fixed-link PHY, instanciate it, and use it during
-phy_connect().
-
-Fixed link PHYs DT usage is described in:
-Documentation/devicetree/bindings/net/fixed-link.txt
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c     |  2 +-
- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 12 +++++++++++-
- 2 files changed, 12 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -856,7 +856,7 @@ static int stmmac_init_phy(struct net_de
- 	 * device as well.
- 	 * Note: phydev->phy_id is the result of reading the UID PHY registers.
- 	 */
--	if (phydev->phy_id == 0) {
-+	if (!priv->plat->phy_node && phydev->phy_id == 0) {
- 		phy_disconnect(phydev);
- 		return -ENODEV;
- 	}
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-@@ -176,6 +176,14 @@ static int stmmac_probe_config_dt(struct
- 	/* If we find a phy-handle property, use it as the PHY */
- 	plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
- 
-+	/* If phy-handle is not specified, check if we have a fixed-phy */
-+	if (!plat->phy_node && of_phy_is_fixed_link(np)) {
-+		if ((of_phy_register_fixed_link(np) < 0))
-+			return -ENODEV;
-+
-+		plat->phy_node = of_node_get(np);
-+	}
-+
- 	/* "snps,phy-addr" is not a standard property. Mark it as deprecated
- 	 * and warn of its use. Remove this when phy node support is added.
- 	 */
-@@ -238,7 +246,7 @@ static int stmmac_probe_config_dt(struct
- 				       GFP_KERNEL);
- 		if (!dma_cfg) {
- 			ret = -ENOMEM;
--			goto err;
-+			goto err2;
- 		}
- 		plat->dma_cfg = dma_cfg;
- 		of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
-@@ -258,6 +266,8 @@ static int stmmac_probe_config_dt(struct
- 
- 	return 0;
- 
-+err2:
-+	of_node_put(np);
- err:
- 	return ret;
- }