ipq806x: ipq4019: add ap-dk01.1-c1 board support

AP-DK01.1-C1 is QCA dev board with:
- ipq4018 quad core ARM @716.8MHz, 2x2 dual (11n+11ac) radio
- 256MB RAM
- 32MB SPI flash
- QCA8075 multiport ethernet phy (WAN port, 4x LAN ports)

First installation via u-boot:
sf probe
sf erase 0x180000 0x1a00000
tftpboot 0x84000000 lede-ipq806x-AP-DK01.1-C1-squashfs-sysupgrade.bin
sf write 0x84000000 0x180000 $filesize

Further upgrades via sysupgrade.

Changes:
- add partitions
- set memory size to 256MB
- add reserved memory mapping
- add correct compatible string
- add image generation
- extract pre-cal data from ART partition

Compile and run tested.
Wirespeed NAT can be achieved with spreading rx interrupts over different
cores. Wifi speed is ~550Mbps @5GHz in open air.

Note:
AP-DK01.1-C1 is fully compatible with AP-DK01.2-C1, which has
ipq4028 instead of ipq4018 on board.

Changes since v2:
- based on dts(i) rework/cleanup submitted:
  http://lists.infradead.org/pipermail/lede-dev/2017-October/009596.html
- precise reserved memory mapping
- more precise description
- compatible string

Signed-off-by: Roman Yeryomin <roman@advem.lv>

1 files changed, 10 insertions, 0 deletions

diff --git a/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch b/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch
new file mode 100644
index 0000000..2d4ff31
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+@@ -18,6 +18,7 @@
+ 
+ / {
+ 	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
++	compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019";
+ 
+ 	memory {
+ 		device_type = "memory";