ipq806x: update target to v3.18

Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386

1 files changed, 0 insertions, 54 deletions

diff --git a/target/linux/ipq806x/patches/0012-devicetree-bindings-Document-qcom-saw2-node.patch b/target/linux/ipq806x/patches/0012-devicetree-bindings-Document-qcom-saw2-node.patch
deleted file mode 100644
index 79aaf2d..0000000
--- a/target/linux/ipq806x/patches/0012-devicetree-bindings-Document-qcom-saw2-node.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 17adce4d3de1fca7761607d572f4979557f0f604 Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Thu, 31 Oct 2013 18:20:30 -0700
-Subject: [PATCH 012/182] devicetree: bindings: Document qcom,saw2 node
-
-The saw2 binding describes the SPM/AVS wrapper hardware used to
-control the regulator supplying voltage to the Krait CPUs.
-
-Cc: <devicetree@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-Signed-off-by: Kumar Gala <galak@codeaurora.org>
----
- .../devicetree/bindings/arm/msm/qcom,saw2.txt      |   35 ++++++++++++++++++++
- 1 file changed, 35 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
-@@ -0,0 +1,35 @@
-+SPM AVS Wrapper 2 (SAW2)
-+
-+The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
-+Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
-+micro-controller that transitions a piece of hardware (like a processor or
-+subsystem) into and out of low power modes via a direct connection to
-+the PMIC. It can also be wired up to interact with other processors in the
-+system, notifying them when a low power state is entered or exited.
-+
-+PROPERTIES
-+
-+- compatible:
-+	Usage: required
-+	Value type: <string>
-+	Definition: shall contain "qcom,saw2". A more specific value should be
-+		    one of:
-+			 "qcom,saw2-v1"
-+			 "qcom,saw2-v1.1"
-+			 "qcom,saw2-v2"
-+			 "qcom,saw2-v2.1"
-+
-+- reg:
-+	Usage: required
-+	Value type: <prop-encoded-array>
-+	Definition: the first element specifies the base address and size of
-+		    the register region. An optional second element specifies
-+		    the base address and size of the alias register region.
-+
-+
-+Example:
-+
-+	regulator@2099000 {
-+		compatible = "qcom,saw2";
-+		reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-+	};