diff options
| author | John Crispin <john@openwrt.org> | 2015-02-11 10:09:23 +0000 |
|---|---|---|
| committer | John Crispin <john@openwrt.org> | 2015-02-11 10:09:23 +0000 |
| commit | 88ddb3746188037afd38d631f7a893587fa8bdf0 (patch) | |
| tree | df4684db63441435126c4b6ff1fda4ce615e1ff0 /target/linux/ipq806x/patches/0151-ARM-ipq8064-Add-nand-device-info.patch | |
| parent | ddcbef5766fa18f52e7a7d1928b25edc63e73937 (diff) | |
| download | mtk-20170518-88ddb3746188037afd38d631f7a893587fa8bdf0.zip mtk-20170518-88ddb3746188037afd38d631f7a893587fa8bdf0.tar.gz mtk-20170518-88ddb3746188037afd38d631f7a893587fa8bdf0.tar.bz2 | |
ipq806x: update target to v3.18
Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.
This new kernel have been tested on AP148, which seems to works fine.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44386
Diffstat (limited to 'target/linux/ipq806x/patches/0151-ARM-ipq8064-Add-nand-device-info.patch')
| -rw-r--r-- | target/linux/ipq806x/patches/0151-ARM-ipq8064-Add-nand-device-info.patch | 108 |
1 files changed, 0 insertions, 108 deletions
diff --git a/target/linux/ipq806x/patches/0151-ARM-ipq8064-Add-nand-device-info.patch b/target/linux/ipq806x/patches/0151-ARM-ipq8064-Add-nand-device-info.patch deleted file mode 100644 index b460454..0000000 --- a/target/linux/ipq806x/patches/0151-ARM-ipq8064-Add-nand-device-info.patch +++ /dev/null @@ -1,108 +0,0 @@ -From 4490cfa66379909cdddc3518c8e75b7cd26d8f69 Mon Sep 17 00:00:00 2001 -From: Andy Gross <agross@codeaurora.org> -Date: Mon, 16 Jun 2014 16:53:49 -0500 -Subject: [PATCH 151/182] ARM: ipq8064: Add nand device info - -Signed-off-by: Andy Gross <agross@codeaurora.org> ---- - arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 34 ++++++++++++++++++++++++++++++ - arch/arm/boot/dts/qcom-ipq8064.dtsi | 33 +++++++++++++++++++++++++++++ - 2 files changed, 67 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -45,6 +45,29 @@ - bias-none; - }; - }; -+ nand_pins: nand_pins { -+ mux { -+ pins = "gpio34", "gpio35", "gpio36", -+ "gpio37", "gpio38", "gpio39", -+ "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ function = "nand"; -+ drive-strength = <10>; -+ bias-disable; -+ }; -+ pullups { -+ pins = "gpio39"; -+ bias-pull-up; -+ }; -+ hold { -+ pins = "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ bias-bus-hold; -+ }; -+ }; -+ - }; - - gsbi@16300000 { -@@ -126,5 +149,16 @@ - sata@29000000 { - status = "ok"; - }; -+ -+ dma@18300000 { -+ status = "ok"; -+ }; -+ -+ nand@0x1ac00000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&nand_pins>; -+ pinctrl-names = "default"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -76,6 +76,7 @@ - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 32 0x4>; -+ - }; - - intc: interrupt-controller@2000000 { -@@ -369,5 +370,37 @@ - phy-names = "sata-phy"; - status = "disabled"; - }; -+ -+ adm_dma: dma@18300000 { -+ compatible = "qcom,adm"; -+ reg = <0x18300000 0x100000>; -+ interrupts = <0 170 0>; -+ -+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; -+ clock-names = "core_clk", "iface_clk"; -+ -+ resets = <&gcc ADM0_RESET>, -+ <&gcc ADM0_PBUS_RESET>, -+ <&gcc ADM0_C0_RESET>, -+ <&gcc ADM0_C1_RESET>, -+ <&gcc ADM0_C2_RESET>; -+ -+ reset-names = "adm", "pbus", "c0", "c1", "c2"; -+ -+ status = "disabled"; -+ }; -+ -+ nand@0x1ac00000 { -+ compatible = "qcom,qcom_nand"; -+ reg = <0x1ac00000 0x800>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ clocks = <&gcc EBI2_CLK>; -+ clock-names = "core_clk"; -+ -+ -+ status = "disabled"; -+ }; - }; - }; |