ipq806x: update target to v3.18

Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386

1 files changed, 0 insertions, 155 deletions

diff --git a/target/linux/ipq806x/patches/0159-arm-ipq8064-Add-USB3-DT-information.patch b/target/linux/ipq806x/patches/0159-arm-ipq8064-Add-USB3-DT-information.patch
deleted file mode 100644
index 843e94f..0000000
--- a/target/linux/ipq806x/patches/0159-arm-ipq8064-Add-USB3-DT-information.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-From 269a71c81438604d27f01ec703daa7f5e3f39e8b Mon Sep 17 00:00:00 2001
-From: Andy Gross <agross@codeaurora.org>
-Date: Sun, 15 Jun 2014 00:48:18 -0500
-Subject: [PATCH 159/182] arm: ipq8064: Add USB3 DT information
-
-This patch fleshes out the USB3 specific information for the IPQ8064 platform.
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064-ap148.dts |   29 ++++++++++
- arch/arm/boot/dts/qcom-ipq8064.dtsi      |   90 ++++++++++++++++++++++++++++++
- 2 files changed, 119 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -160,5 +160,34 @@
- 			pinctrl-0 = <&nand_pins>;
- 			pinctrl-names = "default";
- 		};
-+
-+		tcsr@1a400000 {
-+			status = "ok";
-+			qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
-+		};
-+
-+		phy@100f8800 {		/* USB3 port 1 HS phy */
-+			status = "ok";
-+		};
-+
-+		phy@100f8830 {		/* USB3 port 1 SS phy */
-+			status = "ok";
-+		};
-+
-+		phy@110f8800 {		/* USB3 port 0 HS phy */
-+			status = "ok";
-+		};
-+
-+		phy@110f8830 {		/* USB3 port 0 SS phy */
-+			status = "ok";
-+		};
-+
-+		usb30@0 {
-+			status = "ok";
-+		};
-+
-+		usb30@1 {
-+			status = "ok";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -4,6 +4,7 @@
- #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
- #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
- #include <dt-bindings/soc/qcom,gsbi.h>
-+#include <dt-bindings/soc/qcom,tcsr.h>
- 
- / {
- 	model = "Qualcomm IPQ8064";
-@@ -402,5 +403,94 @@
- 
- 			status = "disabled";
- 		};
-+
-+		tcsr: tcsr@1a400000 {
-+			compatible = "qcom,tcsr";
-+			reg = <0x1a400000 0x100>;
-+
-+			status = "disabled";
-+		};
-+
-+		hs_phy_1: phy@100f8800 {
-+			compatible = "qcom,dwc3-hsphy";
-+			reg = <0x100f8800 0x30>;
-+			clocks = <&gcc USB30_1_UTMI_CLK>;
-+			clock-names = "utmi";
-+
-+			status = "disabled";
-+		};
-+
-+		ss_phy_1: phy@100f8830 {
-+			compatible = "qcom,dwc3-ssphy";
-+			reg = <0x100f8830 0x30>;
-+
-+			clocks = <&gcc USB30_1_MASTER_CLK>;
-+			clock-names = "ref";
-+
-+			status = "disabled";
-+		};
-+
-+		hs_phy_0: phy@110f8800 {
-+			compatible = "qcom,dwc3-hsphy";
-+			reg = <0x110f8800 0x30>;
-+			clocks = <&gcc USB30_0_UTMI_CLK>;
-+			clock-names = "utmi";
-+
-+			status = "disabled";
-+		};
-+
-+		ss_phy_0: phy@110f8830 {
-+			compatible = "qcom,dwc3-ssphy";
-+			reg = <0x110f8830 0x30>;
-+
-+			clocks = <&gcc USB30_0_MASTER_CLK>;
-+			clock-names = "ref";
-+
-+			status = "disabled";
-+		};
-+
-+		usb3_0: usb30@0 {
-+			compatible = "qcom,dwc3";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			clocks = <&gcc USB30_0_MASTER_CLK>;
-+			clock-names = "core";
-+
-+			ranges;
-+
-+			status = "disabled";
-+
-+			dwc3@11000000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x11000000 0xcd00>;
-+				interrupts = <0 110 0x4>;
-+				usb-phy = <&hs_phy_0>, <&ss_phy_0>;
-+				phy-names = "usb2-phy", "usb3-phy";
-+				tx-fifo-resize;
-+				dr_mode = "host";
-+			};
-+		};
-+
-+		usb3_1: usb30@1 {
-+			compatible = "qcom,dwc3";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			clocks = <&gcc USB30_1_MASTER_CLK>;
-+			clock-names = "core";
-+
-+			ranges;
-+
-+			status = "disabled";
-+
-+			dwc3@10000000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x10000000 0xcd00>;
-+				interrupts = <0 205 0x4>;
-+				usb-phy = <&hs_phy_1>, <&ss_phy_1>;
-+				phy-names = "usb2-phy", "usb3-phy";
-+				tx-fifo-resize;
-+				dr_mode = "host";
-+			};
-+		};
- 	};
- };