ipq806x: add support for RPM clock controller

The patch #179 for RPM has initially been made for apq806x board. It has been modified to support ipq806x instead of apq8064.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

7 files changed, 1645 insertions, 0 deletions

diff --git a/target/linux/ipq806x/config-4.4 b/target/linux/ipq806x/config-4.4
index 7094965..a392cb2 100644
--- a/target/linux/ipq806x/config-4.4
+++ b/target/linux/ipq806x/config-4.4
@@ -341,11 +341,13 @@ CONFIG_PRINTK_TIME=y
 CONFIG_PTP_1588_CLOCK=y
 CONFIG_QCOM_ADM=y
 CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_CLK_RPM=y
 CONFIG_QCOM_GDSC=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_HFPLL=y
 CONFIG_QCOM_PM=y
 CONFIG_QCOM_QFPROM=y
+CONFIG_QCOM_RPMCC=y
 CONFIG_QCOM_SCM=y
 CONFIG_QCOM_SCM_32=y
 # CONFIG_QCOM_SMD is not set
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
index fcc08d9..f2d310e 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -101,6 +101,19 @@
 	};
 
 	clocks {
+
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -211,6 +224,11 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
+			rpmcc: clock-controller {
+				compatible	= "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
 			smb208_regulators {
 				compatible = "qcom,rpm-smb208-regulators";
 
diff --git a/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch b/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch
new file mode 100644
index 0000000..60505e1
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch
@@ -0,0 +1,183 @@
+From a085f877a882b465fce74188c9d8efd12bd5acd4 Mon Sep 17 00:00:00 2001
+From: Stephen Boyd <sboyd@codeaurora.org>
+Date: Mon, 26 Oct 2015 18:10:09 -0700
+Subject: clk: qcom: Move cxo/pxo/xo into dt files
+
+Put these clocks into the dt files instead of registering them
+from C code. This provides a few benefits. It allows us to
+specify the frequency of these clocks at the board level instead
+of hard-coding them in the driver. It allows us to insert an RPM
+clock in between the consumers of the crystals and the actual
+clock. And finally, it helps us transition the GCC driver to use
+RPM clocks when that configuration is enabled.
+
+Cc: Georgi Djakov <georgi.djakov@linaro.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/qcom/gcc-apq8084.c | 16 +++++++---------
+ drivers/clk/qcom/gcc-ipq806x.c | 14 ++++++--------
+ drivers/clk/qcom/gcc-msm8660.c | 15 +++++++--------
+ drivers/clk/qcom/gcc-msm8960.c | 14 ++++++--------
+ drivers/clk/qcom/gcc-msm8974.c | 17 +++++++----------
+ 5 files changed, 33 insertions(+), 43 deletions(-)
+
+diff --git a/drivers/clk/qcom/gcc-apq8084.c b/drivers/clk/qcom/gcc-apq8084.c
+index 1567c3a..070037a 100644
+--- a/drivers/clk/qcom/gcc-apq8084.c
++++ b/drivers/clk/qcom/gcc-apq8084.c
+@@ -3607,18 +3607,16 @@ MODULE_DEVICE_TABLE(of, gcc_apq8084_match_table);
+ 
+ static int gcc_apq8084_probe(struct platform_device *pdev)
+ {
+-	struct clk *clk;
++	int ret;
+ 	struct device *dev = &pdev->dev;
+ 
+-	/* Temporary until RPM clocks supported */
+-	clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
+-	if (IS_ERR(clk))
+-		return PTR_ERR(clk);
++	ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000);
++	if (ret)
++		return ret;
+ 
+-	clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL,
+-				      CLK_IS_ROOT, 32768);
+-	if (IS_ERR(clk))
+-		return PTR_ERR(clk);
++	ret = qcom_cc_register_sleep_clk(dev);
++	if (ret)
++		return ret;
+ 
+ 	return qcom_cc_probe(pdev, &gcc_apq8084_desc);
+ }
+diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
+index 16fc64c..dd5402b 100644
+--- a/drivers/clk/qcom/gcc-ipq806x.c
++++ b/drivers/clk/qcom/gcc-ipq806x.c
+@@ -3023,19 +3023,17 @@ MODULE_DEVICE_TABLE(of, gcc_ipq806x_match_table);
+ 
+ static int gcc_ipq806x_probe(struct platform_device *pdev)
+ {
+-	struct clk *clk;
+ 	struct device *dev = &pdev->dev;
+ 	struct regmap *regmap;
+ 	int ret;
+ 
+-	/* Temporary until RPM clocks supported */
+-	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000);
+-	if (IS_ERR(clk))
+-		return PTR_ERR(clk);
++	ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 25000000);
++	if (ret)
++		return ret;
+ 
+-	clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 25000000);
+-	if (IS_ERR(clk))
+-		return PTR_ERR(clk);
++	ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 25000000);
++	if (ret)
++		return ret;
+ 
+ 	ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+ 	if (ret)
+diff --git a/drivers/clk/qcom/gcc-msm8660.c b/drivers/clk/qcom/gcc-msm8660.c
+index f110bb5..ad41303 100644
+--- a/drivers/clk/qcom/gcc-msm8660.c
++++ b/drivers/clk/qcom/gcc-msm8660.c
+@@ -2720,17 +2720,16 @@ MODULE_DEVICE_TABLE(of, gcc_msm8660_match_table);
+ 
+ static int gcc_msm8660_probe(struct platform_device *pdev)
+ {
+-	struct clk *clk;
++	int ret;
+ 	struct device *dev = &pdev->dev;
+ 
+-	/* Temporary until RPM clocks supported */
+-	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
+-	if (IS_ERR(clk))
+-		return PTR_ERR(clk);
++	ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000);
++	if (ret)
++		return ret;
+ 
+-	clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000);
+-	if (IS_ERR(clk))
+-		return PTR_ERR(clk);
++	ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000);
++	if (ret)
++		return ret;
+ 
+ 	return qcom_cc_probe(pdev, &gcc_msm8660_desc);
+ }
+diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
+index 66c18bc..983dd7d 100644
+--- a/drivers/clk/qcom/gcc-msm8960.c
++++ b/drivers/clk/qcom/gcc-msm8960.c
+@@ -3503,7 +3503,6 @@ MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table);
+ 
+ static int gcc_msm8960_probe(struct platform_device *pdev)
+ {
+-	struct clk *clk;
+ 	struct device *dev = &pdev->dev;
+ 	const struct of_device_id *match;
+ 	struct platform_device *tsens;
+@@ -3513,14 +3512,13 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
+ 	if (!match)
+ 		return -EINVAL;
+ 
+-	/* Temporary until RPM clocks supported */
+-	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
+-	if (IS_ERR(clk))
+-		return PTR_ERR(clk);
++	ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000);
++	if (ret)
++		return ret;
+ 
+-	clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000);
+-	if (IS_ERR(clk))
+-		return PTR_ERR(clk);
++	ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000);
++	if (ret)
++		return ret;
+ 
+ 	ret = qcom_cc_probe(pdev, match->data);
+ 	if (ret)
+diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c
+index 28abb8f..335952d 100644
+--- a/drivers/clk/qcom/gcc-msm8974.c
++++ b/drivers/clk/qcom/gcc-msm8974.c
+@@ -2717,7 +2717,7 @@ static void msm8974_pro_clock_override(void)
+ 
+ static int gcc_msm8974_probe(struct platform_device *pdev)
+ {
+-	struct clk *clk;
++	int ret;
+ 	struct device *dev = &pdev->dev;
+ 	bool pro;
+ 	const struct of_device_id *id;
+@@ -2730,16 +2730,13 @@ static int gcc_msm8974_probe(struct platform_device *pdev)
+ 	if (pro)
+ 		msm8974_pro_clock_override();
+ 
+-	/* Temporary until RPM clocks supported */
+-	clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
+-	if (IS_ERR(clk))
+-		return PTR_ERR(clk);
++	ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000);
++	if (ret)
++		return ret;
+ 
+-	/* Should move to DT node? */
+-	clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL,
+-				      CLK_IS_ROOT, 32768);
+-	if (IS_ERR(clk))
+-		return PTR_ERR(clk);
++	ret = qcom_cc_register_sleep_clk(dev);
++	if (ret)
++		return ret;
+ 
+ 	return qcom_cc_probe(pdev, &gcc_msm8974_desc);
+ }
+-- 
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/178-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch b/target/linux/ipq806x/patches-4.4/178-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch
new file mode 100644
index 0000000..8126c7c
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/178-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch
@@ -0,0 +1,746 @@
+From patchwork Wed Nov  2 15:56:56 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v9,1/3] clk: qcom: Add support for SMD-RPM Clocks
+From: Georgi Djakov <georgi.djakov@linaro.org>
+X-Patchwork-Id: 9409419
+Message-Id: <20161102155658.32203-2-georgi.djakov@linaro.org>
+To: sboyd@codeaurora.org, mturquette@baylibre.com
+Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
+ robh+dt@kernel.org, mark.rutland@arm.com,
+ linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
+ georgi.djakov@linaro.org
+Date: Wed,  2 Nov 2016 17:56:56 +0200
+
+This adds initial support for clocks controlled by the Resource
+Power Manager (RPM) processor on some Qualcomm SoCs, which use
+the qcom_smd_rpm driver to communicate with RPM.
+Such platforms are msm8916, apq8084 and msm8974.
+
+The RPM is a dedicated hardware engine for managing the shared
+SoC resources in order to keep the lowest power profile. It
+communicates with other hardware subsystems via shared memory
+and accepts clock requests, aggregates the requests and turns
+the clocks on/off or scales them on demand.
+
+This driver is based on the codeaurora.org driver:
+https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ .../devicetree/bindings/clock/qcom,rpmcc.txt       |  36 ++
+ drivers/clk/qcom/Kconfig                           |  16 +
+ drivers/clk/qcom/Makefile                          |   1 +
+ drivers/clk/qcom/clk-smd-rpm.c                     | 571 +++++++++++++++++++++
+ include/dt-bindings/clock/qcom,rpmcc.h             |  45 ++
+ 5 files changed, 669 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+ create mode 100644 drivers/clk/qcom/clk-smd-rpm.c
+ create mode 100644 include/dt-bindings/clock/qcom,rpmcc.h
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at  http://vger.kernel.org/majordomo-info.html
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+@@ -0,0 +1,36 @@
++Qualcomm RPM Clock Controller Binding
++------------------------------------------------
++The RPM is a dedicated hardware engine for managing the shared
++SoC resources in order to keep the lowest power profile. It
++communicates with other hardware subsystems via shared memory
++and accepts clock requests, aggregates the requests and turns
++the clocks on/off or scales them on demand.
++
++Required properties :
++- compatible : shall contain only one of the following. The generic
++               compatible "qcom,rpmcc" should be also included.
++
++			"qcom,rpmcc-msm8916", "qcom,rpmcc"
++
++- #clock-cells : shall contain 1
++
++Example:
++	smd {
++		compatible = "qcom,smd";
++
++		rpm {
++			interrupts = <0 168 1>;
++			qcom,ipc = <&apcs 8 0>;
++			qcom,smd-edge = <15>;
++
++			rpm_requests {
++				compatible = "qcom,rpm-msm8916";
++				qcom,smd-channels = "rpm_requests";
++
++				rpmcc: clock-controller {
++					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
++					#clock-cells = <1>;
++				};
++			};
++		};
++	};
+--- a/drivers/clk/qcom/Kconfig
++++ b/drivers/clk/qcom/Kconfig
+@@ -2,6 +2,9 @@ config QCOM_GDSC
+ 	bool
+ 	select PM_GENERIC_DOMAINS if PM
+ 
++config QCOM_RPMCC
++	bool
++
+ config COMMON_CLK_QCOM
+ 	tristate "Support for Qualcomm's clock controllers"
+ 	depends on OF
+@@ -9,6 +12,19 @@ config COMMON_CLK_QCOM
+ 	select REGMAP_MMIO
+ 	select RESET_CONTROLLER
+ 
++config QCOM_CLK_SMD_RPM
++	tristate "RPM over SMD based Clock Controller"
++	depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
++	select QCOM_RPMCC
++	help
++	  The RPM (Resource Power Manager) is a dedicated hardware engine for
++	  managing the shared SoC resources in order to keep the lowest power
++	  profile. It communicates with other hardware subsystems via shared
++	  memory and accepts clock requests, aggregates the requests and turns
++	  the clocks on/off or scales them on demand.
++	  Say Y if you want to support the clocks exposed by the RPM on
++	  platforms such as apq8016, apq8084, msm8974 etc.
++
+ config APQ_GCC_8084
+ 	tristate "APQ8084 Global Clock Controller"
+ 	select QCOM_GDSC
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -28,3 +28,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8
+ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+ obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
+ obj-$(CONFIG_KRAITCC) += krait-cc.o
++obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
+--- /dev/null
++++ b/drivers/clk/qcom/clk-smd-rpm.c
+@@ -0,0 +1,571 @@
++/*
++ * Copyright (c) 2016, Linaro Limited
++ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/err.h>
++#include <linux/export.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++#include <linux/soc/qcom/smd-rpm.h>
++
++#include <dt-bindings/clock/qcom,rpmcc.h>
++#include <dt-bindings/mfd/qcom-rpm.h>
++
++#define QCOM_RPM_KEY_SOFTWARE_ENABLE			0x6e657773
++#define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY	0x62636370
++#define QCOM_RPM_SMD_KEY_RATE				0x007a484b
++#define QCOM_RPM_SMD_KEY_ENABLE				0x62616e45
++#define QCOM_RPM_SMD_KEY_STATE				0x54415453
++#define QCOM_RPM_SCALING_ENABLE_ID			0x2
++
++#define __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, stat_id,  \
++			     key)					      \
++	static struct clk_smd_rpm _platform##_##_active;		      \
++	static struct clk_smd_rpm _platform##_##_name = {		      \
++		.rpm_res_type = (type),					      \
++		.rpm_clk_id = (r_id),					      \
++		.rpm_status_id = (stat_id),				      \
++		.rpm_key = (key),					      \
++		.peer = &_platform##_##_active,				      \
++		.rate = INT_MAX,					      \
++		.hw.init = &(struct clk_init_data){			      \
++			.ops = &clk_smd_rpm_ops,			      \
++			.name = #_name,					      \
++			.parent_names = (const char *[]){ "xo_board" },       \
++			.num_parents = 1,				      \
++		},							      \
++	};								      \
++	static struct clk_smd_rpm _platform##_##_active = {		      \
++		.rpm_res_type = (type),					      \
++		.rpm_clk_id = (r_id),					      \
++		.rpm_status_id = (stat_id),				      \
++		.active_only = true,					      \
++		.rpm_key = (key),					      \
++		.peer = &_platform##_##_name,				      \
++		.rate = INT_MAX,					      \
++		.hw.init = &(struct clk_init_data){			      \
++			.ops = &clk_smd_rpm_ops,			      \
++			.name = #_active,				      \
++			.parent_names = (const char *[]){ "xo_board" },	      \
++			.num_parents = 1,				      \
++		},							      \
++	}
++
++#define __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id,    \
++				    stat_id, r, key)			      \
++	static struct clk_smd_rpm _platform##_##_active;		      \
++	static struct clk_smd_rpm _platform##_##_name = {		      \
++		.rpm_res_type = (type),					      \
++		.rpm_clk_id = (r_id),					      \
++		.rpm_status_id = (stat_id),				      \
++		.rpm_key = (key),					      \
++		.branch = true,						      \
++		.peer = &_platform##_##_active,				      \
++		.rate = (r),						      \
++		.hw.init = &(struct clk_init_data){			      \
++			.ops = &clk_smd_rpm_branch_ops,			      \
++			.name = #_name,					      \
++			.parent_names = (const char *[]){ "xo_board" },	      \
++			.num_parents = 1,				      \
++		},							      \
++	};								      \
++	static struct clk_smd_rpm _platform##_##_active = {		      \
++		.rpm_res_type = (type),					      \
++		.rpm_clk_id = (r_id),					      \
++		.rpm_status_id = (stat_id),				      \
++		.active_only = true,					      \
++		.rpm_key = (key),					      \
++		.branch = true,						      \
++		.peer = &_platform##_##_name,				      \
++		.rate = (r),						      \
++		.hw.init = &(struct clk_init_data){			      \
++			.ops = &clk_smd_rpm_branch_ops,			      \
++			.name = #_active,				      \
++			.parent_names = (const char *[]){ "xo_board" },	      \
++			.num_parents = 1,				      \
++		},							      \
++	}
++
++#define DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id)	      \
++		__DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id,   \
++		0, QCOM_RPM_SMD_KEY_RATE)
++
++#define DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, r)   \
++		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type,  \
++		r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE)
++
++#define DEFINE_CLK_SMD_RPM_QDSS(_platform, _name, _active, type, r_id)	      \
++		__DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id,   \
++		0, QCOM_RPM_SMD_KEY_STATE)
++
++#define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id)	      \
++		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active,	      \
++		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000,			      \
++		QCOM_RPM_KEY_SOFTWARE_ENABLE)
++
++#define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active, r_id) \
++		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active,	      \
++		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000,			      \
++		QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
++
++#define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)
++
++struct clk_smd_rpm {
++	const int rpm_res_type;
++	const int rpm_key;
++	const int rpm_clk_id;
++	const int rpm_status_id;
++	const bool active_only;
++	bool enabled;
++	bool branch;
++	struct clk_smd_rpm *peer;
++	struct clk_hw hw;
++	unsigned long rate;
++	struct qcom_smd_rpm *rpm;
++};
++
++struct clk_smd_rpm_req {
++	__le32 key;
++	__le32 nbytes;
++	__le32 value;
++};
++
++struct rpm_cc {
++	struct qcom_rpm *rpm;
++	struct clk_hw_onecell_data data;
++	struct clk_hw *hws[];
++};
++
++struct rpm_smd_clk_desc {
++	struct clk_smd_rpm **clks;
++	size_t num_clks;
++};
++
++static DEFINE_MUTEX(rpm_smd_clk_lock);
++
++static int clk_smd_rpm_handoff(struct clk_smd_rpm *r)
++{
++	int ret;
++	struct clk_smd_rpm_req req = {
++		.key = cpu_to_le32(r->rpm_key),
++		.nbytes = cpu_to_le32(sizeof(u32)),
++		.value = cpu_to_le32(INT_MAX),
++	};
++
++	ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
++				 r->rpm_res_type, r->rpm_clk_id, &req,
++				 sizeof(req));
++	if (ret)
++		return ret;
++	ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
++				 r->rpm_res_type, r->rpm_clk_id, &req,
++				 sizeof(req));
++	if (ret)
++		return ret;
++
++	return 0;
++}
++
++static int clk_smd_rpm_set_rate_active(struct clk_smd_rpm *r,
++				       unsigned long rate)
++{
++	struct clk_smd_rpm_req req = {
++		.key = cpu_to_le32(r->rpm_key),
++		.nbytes = cpu_to_le32(sizeof(u32)),
++		.value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
++	};
++
++	return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
++				  r->rpm_res_type, r->rpm_clk_id, &req,
++				  sizeof(req));
++}
++
++static int clk_smd_rpm_set_rate_sleep(struct clk_smd_rpm *r,
++				      unsigned long rate)
++{
++	struct clk_smd_rpm_req req = {
++		.key = cpu_to_le32(r->rpm_key),
++		.nbytes = cpu_to_le32(sizeof(u32)),
++		.value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
++	};
++
++	return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
++				  r->rpm_res_type, r->rpm_clk_id, &req,
++				  sizeof(req));
++}
++
++static void to_active_sleep(struct clk_smd_rpm *r, unsigned long rate,
++			    unsigned long *active, unsigned long *sleep)
++{
++	*active = rate;
++
++	/*
++	 * Active-only clocks don't care what the rate is during sleep. So,
++	 * they vote for zero.
++	 */
++	if (r->active_only)
++		*sleep = 0;
++	else
++		*sleep = *active;
++}
++
++static int clk_smd_rpm_prepare(struct clk_hw *hw)
++{
++	struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++	struct clk_smd_rpm *peer = r->peer;
++	unsigned long this_rate = 0, this_sleep_rate = 0;
++	unsigned long peer_rate = 0, peer_sleep_rate = 0;
++	unsigned long active_rate, sleep_rate;
++	int ret = 0;
++
++	mutex_lock(&rpm_smd_clk_lock);
++
++	/* Don't send requests to the RPM if the rate has not been set. */
++	if (!r->rate)
++		goto out;
++
++	to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
++
++	/* Take peer clock's rate into account only if it's enabled. */
++	if (peer->enabled)
++		to_active_sleep(peer, peer->rate,
++				&peer_rate, &peer_sleep_rate);
++
++	active_rate = max(this_rate, peer_rate);
++
++	if (r->branch)
++		active_rate = !!active_rate;
++
++	ret = clk_smd_rpm_set_rate_active(r, active_rate);
++	if (ret)
++		goto out;
++
++	sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++	if (r->branch)
++		sleep_rate = !!sleep_rate;
++
++	ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
++	if (ret)
++		/* Undo the active set vote and restore it */
++		ret = clk_smd_rpm_set_rate_active(r, peer_rate);
++
++out:
++	if (!ret)
++		r->enabled = true;
++
++	mutex_unlock(&rpm_smd_clk_lock);
++
++	return ret;
++}
++
++static void clk_smd_rpm_unprepare(struct clk_hw *hw)
++{
++	struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++	struct clk_smd_rpm *peer = r->peer;
++	unsigned long peer_rate = 0, peer_sleep_rate = 0;
++	unsigned long active_rate, sleep_rate;
++	int ret;
++
++	mutex_lock(&rpm_smd_clk_lock);
++
++	if (!r->rate)
++		goto out;
++
++	/* Take peer clock's rate into account only if it's enabled. */
++	if (peer->enabled)
++		to_active_sleep(peer, peer->rate, &peer_rate,
++				&peer_sleep_rate);
++
++	active_rate = r->branch ? !!peer_rate : peer_rate;
++	ret = clk_smd_rpm_set_rate_active(r, active_rate);
++	if (ret)
++		goto out;
++
++	sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
++	ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
++	if (ret)
++		goto out;
++
++	r->enabled = false;
++
++out:
++	mutex_unlock(&rpm_smd_clk_lock);
++}
++
++static int clk_smd_rpm_set_rate(struct clk_hw *hw, unsigned long rate,
++				unsigned long parent_rate)
++{
++	struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++	struct clk_smd_rpm *peer = r->peer;
++	unsigned long active_rate, sleep_rate;
++	unsigned long this_rate = 0, this_sleep_rate = 0;
++	unsigned long peer_rate = 0, peer_sleep_rate = 0;
++	int ret = 0;
++
++	mutex_lock(&rpm_smd_clk_lock);
++
++	if (!r->enabled)
++		goto out;
++
++	to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
++
++	/* Take peer clock's rate into account only if it's enabled. */
++	if (peer->enabled)
++		to_active_sleep(peer, peer->rate,
++				&peer_rate, &peer_sleep_rate);
++
++	active_rate = max(this_rate, peer_rate);
++	ret = clk_smd_rpm_set_rate_active(r, active_rate);
++	if (ret)
++		goto out;
++
++	sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++	ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
++	if (ret)
++		goto out;
++
++	r->rate = rate;
++
++out:
++	mutex_unlock(&rpm_smd_clk_lock);
++
++	return ret;
++}
++
++static long clk_smd_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
++				   unsigned long *parent_rate)
++{
++	/*
++	 * RPM handles rate rounding and we don't have a way to
++	 * know what the rate will be, so just return whatever
++	 * rate is requested.
++	 */
++	return rate;
++}
++
++static unsigned long clk_smd_rpm_recalc_rate(struct clk_hw *hw,
++					     unsigned long parent_rate)
++{
++	struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++
++	/*
++	 * RPM handles rate rounding and we don't have a way to
++	 * know what the rate will be, so just return whatever
++	 * rate was set.
++	 */
++	return r->rate;
++}
++
++static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
++{
++	int ret;
++	struct clk_smd_rpm_req req = {
++		.key = cpu_to_le32(QCOM_RPM_SMD_KEY_ENABLE),
++		.nbytes = cpu_to_le32(sizeof(u32)),
++		.value = cpu_to_le32(1),
++	};
++
++	ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_SLEEP_STATE,
++				 QCOM_SMD_RPM_MISC_CLK,
++				 QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
++	if (ret) {
++		pr_err("RPM clock scaling (sleep set) not enabled!\n");
++		return ret;
++	}
++
++	ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_ACTIVE_STATE,
++				 QCOM_SMD_RPM_MISC_CLK,
++				 QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
++	if (ret) {
++		pr_err("RPM clock scaling (active set) not enabled!\n");
++		return ret;
++	}
++
++	pr_debug("%s: RPM clock scaling is enabled\n", __func__);
++	return 0;
++}
++
++static const struct clk_ops clk_smd_rpm_ops = {
++	.prepare	= clk_smd_rpm_prepare,
++	.unprepare	= clk_smd_rpm_unprepare,
++	.set_rate	= clk_smd_rpm_set_rate,
++	.round_rate	= clk_smd_rpm_round_rate,
++	.recalc_rate	= clk_smd_rpm_recalc_rate,
++};
++
++static const struct clk_ops clk_smd_rpm_branch_ops = {
++	.prepare	= clk_smd_rpm_prepare,
++	.unprepare	= clk_smd_rpm_unprepare,
++	.round_rate	= clk_smd_rpm_round_rate,
++	.recalc_rate	= clk_smd_rpm_recalc_rate,
++};
++
++/* msm8916 */
++DEFINE_CLK_SMD_RPM(msm8916, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
++DEFINE_CLK_SMD_RPM(msm8916, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
++DEFINE_CLK_SMD_RPM(msm8916, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
++DEFINE_CLK_SMD_RPM_QDSS(msm8916, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk1, bb_clk1_a, 1);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk2, bb_clk2_a, 2);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk1, rf_clk1_a, 4);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk2, rf_clk2_a, 5);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk1_pin, bb_clk1_a_pin, 1);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk2_pin, bb_clk2_a_pin, 2);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk1_pin, rf_clk1_a_pin, 4);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk2_pin, rf_clk2_a_pin, 5);
++
++static struct clk_smd_rpm *msm8916_clks[] = {
++	[RPM_SMD_PCNOC_CLK]		= &msm8916_pcnoc_clk,
++	[RPM_SMD_PCNOC_A_CLK]		= &msm8916_pcnoc_a_clk,
++	[RPM_SMD_SNOC_CLK]		= &msm8916_snoc_clk,
++	[RPM_SMD_SNOC_A_CLK]		= &msm8916_snoc_a_clk,
++	[RPM_SMD_BIMC_CLK]		= &msm8916_bimc_clk,
++	[RPM_SMD_BIMC_A_CLK]		= &msm8916_bimc_a_clk,
++	[RPM_SMD_QDSS_CLK]		= &msm8916_qdss_clk,
++	[RPM_SMD_QDSS_A_CLK]		= &msm8916_qdss_a_clk,
++	[RPM_SMD_BB_CLK1]		= &msm8916_bb_clk1,
++	[RPM_SMD_BB_CLK1_A]		= &msm8916_bb_clk1_a,
++	[RPM_SMD_BB_CLK2]		= &msm8916_bb_clk2,
++	[RPM_SMD_BB_CLK2_A]		= &msm8916_bb_clk2_a,
++	[RPM_SMD_RF_CLK1]		= &msm8916_rf_clk1,
++	[RPM_SMD_RF_CLK1_A]		= &msm8916_rf_clk1_a,
++	[RPM_SMD_RF_CLK2]		= &msm8916_rf_clk2,
++	[RPM_SMD_RF_CLK2_A]		= &msm8916_rf_clk2_a,
++	[RPM_SMD_BB_CLK1_PIN]		= &msm8916_bb_clk1_pin,
++	[RPM_SMD_BB_CLK1_A_PIN]		= &msm8916_bb_clk1_a_pin,
++	[RPM_SMD_BB_CLK2_PIN]		= &msm8916_bb_clk2_pin,
++	[RPM_SMD_BB_CLK2_A_PIN]		= &msm8916_bb_clk2_a_pin,
++	[RPM_SMD_RF_CLK1_PIN]		= &msm8916_rf_clk1_pin,
++	[RPM_SMD_RF_CLK1_A_PIN]		= &msm8916_rf_clk1_a_pin,
++	[RPM_SMD_RF_CLK2_PIN]		= &msm8916_rf_clk2_pin,
++	[RPM_SMD_RF_CLK2_A_PIN]		= &msm8916_rf_clk2_a_pin,
++};
++
++static const struct rpm_smd_clk_desc rpm_clk_msm8916 = {
++	.clks = msm8916_clks,
++	.num_clks = ARRAY_SIZE(msm8916_clks),
++};
++
++static const struct of_device_id rpm_smd_clk_match_table[] = {
++	{ .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
++	{ }
++};
++MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table);
++
++static int rpm_smd_clk_probe(struct platform_device *pdev)
++{
++	struct clk_hw **hws;
++	struct rpm_cc *rcc;
++	struct clk_hw_onecell_data *data;
++	int ret;
++	size_t num_clks, i;
++	struct qcom_smd_rpm *rpm;
++	struct clk_smd_rpm **rpm_smd_clks;
++	const struct rpm_smd_clk_desc *desc;
++
++	rpm = dev_get_drvdata(pdev->dev.parent);
++	if (!rpm) {
++		dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
++		return -ENODEV;
++	}
++
++	desc = of_device_get_match_data(&pdev->dev);
++	if (!desc)
++		return -EINVAL;
++
++	rpm_smd_clks = desc->clks;
++	num_clks = desc->num_clks;
++
++	rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
++			   GFP_KERNEL);
++	if (!rcc)
++		return -ENOMEM;
++
++	hws = rcc->hws;
++	data = &rcc->data;
++	data->num = num_clks;
++
++	for (i = 0; i < num_clks; i++) {
++		if (!rpm_smd_clks[i]) {
++			continue;
++		}
++
++		rpm_smd_clks[i]->rpm = rpm;
++
++		ret = clk_smd_rpm_handoff(rpm_smd_clks[i]);
++		if (ret)
++			goto err;
++	}
++
++	ret = clk_smd_rpm_enable_scaling(rpm);
++	if (ret)
++		goto err;
++
++	for (i = 0; i < num_clks; i++) {
++		if (!rpm_smd_clks[i]) {
++			data->hws[i] = ERR_PTR(-ENOENT);
++			continue;
++		}
++
++		ret = devm_clk_hw_register(&pdev->dev, &rpm_smd_clks[i]->hw);
++		if (ret)
++			goto err;
++	}
++
++	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
++				     data);
++	if (ret)
++		goto err;
++
++	return 0;
++err:
++	dev_err(&pdev->dev, "Error registering SMD clock driver (%d)\n", ret);
++	return ret;
++}
++
++static int rpm_smd_clk_remove(struct platform_device *pdev)
++{
++	of_clk_del_provider(pdev->dev.of_node);
++	return 0;
++}
++
++static struct platform_driver rpm_smd_clk_driver = {
++	.driver = {
++		.name = "qcom-clk-smd-rpm",
++		.of_match_table = rpm_smd_clk_match_table,
++	},
++	.probe = rpm_smd_clk_probe,
++	.remove = rpm_smd_clk_remove,
++};
++
++static int __init rpm_smd_clk_init(void)
++{
++	return platform_driver_register(&rpm_smd_clk_driver);
++}
++core_initcall(rpm_smd_clk_init);
++
++static void __exit rpm_smd_clk_exit(void)
++{
++	platform_driver_unregister(&rpm_smd_clk_driver);
++}
++module_exit(rpm_smd_clk_exit);
++
++MODULE_DESCRIPTION("Qualcomm RPM over SMD Clock Controller Driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:qcom-clk-smd-rpm");
+--- /dev/null
++++ b/include/dt-bindings/clock/qcom,rpmcc.h
+@@ -0,0 +1,45 @@
++/*
++ * Copyright 2015 Linaro Limited
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
++#define _DT_BINDINGS_CLK_MSM_RPMCC_H
++
++/* msm8916 */
++#define RPM_SMD_XO_CLK_SRC				0
++#define RPM_SMD_XO_A_CLK_SRC			1
++#define RPM_SMD_PCNOC_CLK				2
++#define RPM_SMD_PCNOC_A_CLK				3
++#define RPM_SMD_SNOC_CLK				4
++#define RPM_SMD_SNOC_A_CLK				5
++#define RPM_SMD_BIMC_CLK				6
++#define RPM_SMD_BIMC_A_CLK				7
++#define RPM_SMD_QDSS_CLK				8
++#define RPM_SMD_QDSS_A_CLK				9
++#define RPM_SMD_BB_CLK1				10
++#define RPM_SMD_BB_CLK1_A				11
++#define RPM_SMD_BB_CLK2				12
++#define RPM_SMD_BB_CLK2_A				13
++#define RPM_SMD_RF_CLK1				14
++#define RPM_SMD_RF_CLK1_A				15
++#define RPM_SMD_RF_CLK2				16
++#define RPM_SMD_RF_CLK2_A				17
++#define RPM_SMD_BB_CLK1_PIN				18
++#define RPM_SMD_BB_CLK1_A_PIN			19
++#define RPM_SMD_BB_CLK2_PIN				20
++#define RPM_SMD_BB_CLK2_A_PIN			21
++#define RPM_SMD_RF_CLK1_PIN				22
++#define RPM_SMD_RF_CLK1_A_PIN			23
++#define RPM_SMD_RF_CLK2_PIN				24
++#define RPM_SMD_RF_CLK2_A_PIN			25
++
++#endif
diff --git a/target/linux/ipq806x/patches-4.4/179-clk-qcom-Add-support-for-RPM-Clocks.patch b/target/linux/ipq806x/patches-4.4/179-clk-qcom-Add-support-for-RPM-Clocks.patch
new file mode 100644
index 0000000..27e20be
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/179-clk-qcom-Add-support-for-RPM-Clocks.patch
@@ -0,0 +1,598 @@
+!This is the adjusted version of patch that has been submitted to upstream and that, unfortunately, provides support for RPM clocks only for apq8064 board.
+
+!TODO: make a patch that adds support for ipq806x along with apq8064 and not replaces it.
+
+From patchwork Wed Nov  2 15:56:57 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v9,2/3] clk: qcom: Add support for RPM Clocks
+From: Georgi Djakov <georgi.djakov@linaro.org>
+X-Patchwork-Id: 9409425
+Message-Id: <20161102155658.32203-3-georgi.djakov@linaro.org>
+To: sboyd@codeaurora.org, mturquette@baylibre.com
+Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
+ robh+dt@kernel.org, mark.rutland@arm.com,
+ linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
+ georgi.djakov@linaro.org
+Date: Wed,  2 Nov 2016 17:56:57 +0200
+
+This adds initial support for clocks controlled by the Resource
+Power Manager (RPM) processor on some Qualcomm SoCs, which use
+the qcom_rpm driver to communicate with RPM.
+Such platforms are ipq806x and msm8960.
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ .../devicetree/bindings/clock/qcom,rpmcc.txt       |   1 +
+ drivers/clk/qcom/Kconfig                           |  13 +
+ drivers/clk/qcom/Makefile                          |   1 +
+ drivers/clk/qcom/clk-rpm.c                         | 489 +++++++++++++++++++++
+ include/dt-bindings/clock/qcom,rpmcc.h             |  24 +
+ 5 files changed, 528 insertions(+)
+ create mode 100644 drivers/clk/qcom/clk-rpm.c
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at  http://vger.kernel.org/majordomo-info.html
+
+--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+@@ -11,6 +11,7 @@ Required properties :
+                compatible "qcom,rpmcc" should be also included.
+ 
+ 			"qcom,rpmcc-msm8916", "qcom,rpmcc"
++			"qcom,rpmcc-ipq806x", "qcom,rpmcc"
+ 
+ - #clock-cells : shall contain 1
+ 
+--- a/drivers/clk/qcom/Kconfig
++++ b/drivers/clk/qcom/Kconfig
+@@ -12,6 +12,19 @@ config COMMON_CLK_QCOM
+ 	select REGMAP_MMIO
+ 	select RESET_CONTROLLER
+ 
++config QCOM_CLK_RPM
++	tristate "RPM based Clock Controller"
++	depends on COMMON_CLK_QCOM && MFD_QCOM_RPM
++	select QCOM_RPMCC
++	help
++	  The RPM (Resource Power Manager) is a dedicated hardware engine for
++	  managing the shared SoC resources in order to keep the lowest power
++	  profile. It communicates with other hardware subsystems via shared
++	  memory and accepts clock requests, aggregates the requests and turns
++	  the clocks on/off or scales them on demand.
++	  Say Y if you want to support the clocks exposed by the RPM on
++	  platforms such as ipq806x, msm8660, msm8960 etc.
++
+ config QCOM_CLK_SMD_RPM
+ 	tristate "RPM over SMD based Clock Controller"
+ 	depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -29,3 +29,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
+ obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
+ obj-$(CONFIG_KRAITCC) += krait-cc.o
+ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
++obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
+--- /dev/null
++++ b/drivers/clk/qcom/clk-rpm.c
+@@ -0,0 +1,486 @@
++/*
++ * Copyright (c) 2016, Linaro Limited
++ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/err.h>
++#include <linux/export.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/mfd/qcom_rpm.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++
++#include <dt-bindings/mfd/qcom-rpm.h>
++#include <dt-bindings/clock/qcom,rpmcc.h>
++
++#define QCOM_RPM_MISC_CLK_TYPE				0x306b6c63
++#define QCOM_RPM_SCALING_ENABLE_ID			0x2
++
++#define DEFINE_CLK_RPM(_platform, _name, _active, r_id)			      \
++	static struct clk_rpm _platform##_##_active;			      \
++	static struct clk_rpm _platform##_##_name = {			      \
++		.rpm_clk_id = (r_id),					      \
++		.peer = &_platform##_##_active,				      \
++		.rate = INT_MAX,					      \
++		.hw.init = &(struct clk_init_data){			      \
++			.ops = &clk_rpm_ops,				      \
++			.name = #_name,					      \
++			.parent_names = (const char *[]){ "pxo_board" },      \
++			.num_parents = 1,				      \
++		},							      \
++	};								      \
++	static struct clk_rpm _platform##_##_active = {			      \
++		.rpm_clk_id = (r_id),					      \
++		.peer = &_platform##_##_name,				      \
++		.active_only = true,					      \
++		.rate = INT_MAX,					      \
++		.hw.init = &(struct clk_init_data){			      \
++			.ops = &clk_rpm_ops,				      \
++			.name = #_active,				      \
++			.parent_names = (const char *[]){ "pxo_board" },      \
++			.num_parents = 1,				      \
++		},							      \
++	}
++
++#define DEFINE_CLK_RPM_PXO_BRANCH(_platform, _name, _active, r_id, r)	      \
++	static struct clk_rpm _platform##_##_active;			      \
++	static struct clk_rpm _platform##_##_name = {			      \
++		.rpm_clk_id = (r_id),					      \
++		.active_only = true,					      \
++		.peer = &_platform##_##_active,				      \
++		.rate = (r),						      \
++		.branch = true,						      \
++		.hw.init = &(struct clk_init_data){			      \
++			.ops = &clk_rpm_branch_ops,			      \
++			.name = #_name,					      \
++			.parent_names = (const char *[]){ "pxo_board" },      \
++			.num_parents = 1,				      \
++		},							      \
++	};								      \
++	static struct clk_rpm _platform##_##_active = {			      \
++		.rpm_clk_id = (r_id),					      \
++		.peer = &_platform##_##_name,				      \
++		.rate = (r),						      \
++		.branch = true,						      \
++		.hw.init = &(struct clk_init_data){			      \
++			.ops = &clk_rpm_branch_ops,			      \
++			.name = #_active,				      \
++			.parent_names = (const char *[]){ "pxo_board" },      \
++			.num_parents = 1,				      \
++		},							      \
++	}
++
++#define DEFINE_CLK_RPM_CXO_BRANCH(_platform, _name, _active, r_id, r)	      \
++	static struct clk_rpm _platform##_##_active;			      \
++	static struct clk_rpm _platform##_##_name = {			      \
++		.rpm_clk_id = (r_id),					      \
++		.peer = &_platform##_##_active,				      \
++		.rate = (r),						      \
++		.branch = true,						      \
++		.hw.init = &(struct clk_init_data){			      \
++			.ops = &clk_rpm_branch_ops,			      \
++			.name = #_name,					      \
++			.parent_names = (const char *[]){ "cxo_board" },      \
++			.num_parents = 1,				      \
++		},							      \
++	};								      \
++	static struct clk_rpm _platform##_##_active = {			      \
++		.rpm_clk_id = (r_id),					      \
++		.active_only = true,					      \
++		.peer = &_platform##_##_name,				      \
++		.rate = (r),						      \
++		.branch = true,						      \
++		.hw.init = &(struct clk_init_data){			      \
++			.ops = &clk_rpm_branch_ops,			      \
++			.name = #_active,				      \
++			.parent_names = (const char *[]){ "cxo_board" },      \
++			.num_parents = 1,				      \
++		},							      \
++	}
++
++#define to_clk_rpm(_hw) container_of(_hw, struct clk_rpm, hw)
++
++struct clk_rpm {
++	const int rpm_clk_id;
++	const bool active_only;
++	unsigned long rate;
++	bool enabled;
++	bool branch;
++	struct clk_rpm *peer;
++	struct clk_hw hw;
++	struct qcom_rpm *rpm;
++};
++
++struct rpm_cc {
++	struct qcom_rpm *rpm;
++	struct clk_hw_onecell_data data;
++	struct clk_hw *hws[];
++};
++
++struct rpm_clk_desc {
++	struct clk_rpm **clks;
++	size_t num_clks;
++};
++
++static DEFINE_MUTEX(rpm_clk_lock);
++
++static int clk_rpm_handoff(struct clk_rpm *r)
++{
++	int ret;
++	u32 value = INT_MAX;
++
++	ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE,
++			     r->rpm_clk_id, &value, 1);
++	if (ret)
++		return ret;
++	ret = qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE,
++			     r->rpm_clk_id, &value, 1);
++	if (ret)
++		return ret;
++
++	return 0;
++}
++
++static int clk_rpm_set_rate_active(struct clk_rpm *r, unsigned long rate)
++{
++	u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */
++
++	return qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE,
++			      r->rpm_clk_id, &value, 1);
++}
++
++static int clk_rpm_set_rate_sleep(struct clk_rpm *r, unsigned long rate)
++{
++	u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */
++
++	return qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE,
++			      r->rpm_clk_id, &value, 1);
++}
++
++static void to_active_sleep(struct clk_rpm *r, unsigned long rate,
++			    unsigned long *active, unsigned long *sleep)
++{
++	*active = rate;
++
++	/*
++	 * Active-only clocks don't care what the rate is during sleep. So,
++	 * they vote for zero.
++	 */
++	if (r->active_only)
++		*sleep = 0;
++	else
++		*sleep = *active;
++}
++
++static int clk_rpm_prepare(struct clk_hw *hw)
++{
++	struct clk_rpm *r = to_clk_rpm(hw);
++	struct clk_rpm *peer = r->peer;
++	unsigned long this_rate = 0, this_sleep_rate = 0;
++	unsigned long peer_rate = 0, peer_sleep_rate = 0;
++	unsigned long active_rate, sleep_rate;
++	int ret = 0;
++
++	mutex_lock(&rpm_clk_lock);
++
++	/* Don't send requests to the RPM if the rate has not been set. */
++	if (!r->rate)
++		goto out;
++
++	to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
++
++	/* Take peer clock's rate into account only if it's enabled. */
++	if (peer->enabled)
++		to_active_sleep(peer, peer->rate,
++				&peer_rate, &peer_sleep_rate);
++
++	active_rate = max(this_rate, peer_rate);
++
++	if (r->branch)
++		active_rate = !!active_rate;
++
++	ret = clk_rpm_set_rate_active(r, active_rate);
++	if (ret)
++		goto out;
++
++	sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++	if (r->branch)
++		sleep_rate = !!sleep_rate;
++
++	ret = clk_rpm_set_rate_sleep(r, sleep_rate);
++	if (ret)
++		/* Undo the active set vote and restore it */
++		ret = clk_rpm_set_rate_active(r, peer_rate);
++
++out:
++	if (!ret)
++		r->enabled = true;
++
++	mutex_unlock(&rpm_clk_lock);
++
++	return ret;
++}
++
++static void clk_rpm_unprepare(struct clk_hw *hw)
++{
++	struct clk_rpm *r = to_clk_rpm(hw);
++	struct clk_rpm *peer = r->peer;
++	unsigned long peer_rate = 0, peer_sleep_rate = 0;
++	unsigned long active_rate, sleep_rate;
++	int ret;
++
++	mutex_lock(&rpm_clk_lock);
++
++	if (!r->rate)
++		goto out;
++
++	/* Take peer clock's rate into account only if it's enabled. */
++	if (peer->enabled)
++		to_active_sleep(peer, peer->rate, &peer_rate,
++				&peer_sleep_rate);
++
++	active_rate = r->branch ? !!peer_rate : peer_rate;
++	ret = clk_rpm_set_rate_active(r, active_rate);
++	if (ret)
++		goto out;
++
++	sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
++	ret = clk_rpm_set_rate_sleep(r, sleep_rate);
++	if (ret)
++		goto out;
++
++	r->enabled = false;
++
++out:
++	mutex_unlock(&rpm_clk_lock);
++}
++
++static int clk_rpm_set_rate(struct clk_hw *hw,
++			    unsigned long rate, unsigned long parent_rate)
++{
++	struct clk_rpm *r = to_clk_rpm(hw);
++	struct clk_rpm *peer = r->peer;
++	unsigned long active_rate, sleep_rate;
++	unsigned long this_rate = 0, this_sleep_rate = 0;
++	unsigned long peer_rate = 0, peer_sleep_rate = 0;
++	int ret = 0;
++
++	mutex_lock(&rpm_clk_lock);
++
++	if (!r->enabled)
++		goto out;
++
++	to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
++
++	/* Take peer clock's rate into account only if it's enabled. */
++	if (peer->enabled)
++		to_active_sleep(peer, peer->rate,
++				&peer_rate, &peer_sleep_rate);
++
++	active_rate = max(this_rate, peer_rate);
++	ret = clk_rpm_set_rate_active(r, active_rate);
++	if (ret)
++		goto out;
++
++	sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++	ret = clk_rpm_set_rate_sleep(r, sleep_rate);
++	if (ret)
++		goto out;
++
++	r->rate = rate;
++
++out:
++	mutex_unlock(&rpm_clk_lock);
++
++	return ret;
++}
++
++static long clk_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
++			       unsigned long *parent_rate)
++{
++	/*
++	 * RPM handles rate rounding and we don't have a way to
++	 * know what the rate will be, so just return whatever
++	 * rate is requested.
++	 */
++	return rate;
++}
++
++static unsigned long clk_rpm_recalc_rate(struct clk_hw *hw,
++					 unsigned long parent_rate)
++{
++	struct clk_rpm *r = to_clk_rpm(hw);
++
++	/*
++	 * RPM handles rate rounding and we don't have a way to
++	 * know what the rate will be, so just return whatever
++	 * rate was set.
++	 */
++	return r->rate;
++}
++
++static const struct clk_ops clk_rpm_ops = {
++	.prepare	= clk_rpm_prepare,
++	.unprepare	= clk_rpm_unprepare,
++	.set_rate	= clk_rpm_set_rate,
++	.round_rate	= clk_rpm_round_rate,
++	.recalc_rate	= clk_rpm_recalc_rate,
++};
++
++static const struct clk_ops clk_rpm_branch_ops = {
++	.prepare	= clk_rpm_prepare,
++	.unprepare	= clk_rpm_unprepare,
++	.round_rate	= clk_rpm_round_rate,
++	.recalc_rate	= clk_rpm_recalc_rate,
++};
++
++/* ipq806x */
++DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
++DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
++DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
++DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
++DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
++
++static struct clk_rpm *ipq806x_clks[] = {
++	[RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
++	[RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
++	[RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
++	[RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
++	[RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
++	[RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
++	[RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
++	[RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
++	[RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
++	[RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
++	[RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
++	[RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
++	[RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
++	[RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
++	[RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
++	[RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
++};
++
++static const struct rpm_clk_desc rpm_clk_ipq806x = {
++	.clks = ipq806x_clks,
++	.num_clks = ARRAY_SIZE(ipq806x_clks),
++};
++
++static const struct of_device_id rpm_clk_match_table[] = {
++	{ .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
++	{ }
++};
++MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
++
++static int rpm_clk_probe(struct platform_device *pdev)
++{
++	struct clk_hw **hws;
++	struct rpm_cc *rcc;
++	struct clk_hw_onecell_data *data;
++	int ret;
++	size_t num_clks, i;
++	struct qcom_rpm *rpm;
++	struct clk_rpm **rpm_clks;
++	const struct rpm_clk_desc *desc;
++
++	rpm = dev_get_drvdata(pdev->dev.parent);
++	if (!rpm) {
++		dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
++		return -ENODEV;
++	}
++
++	desc = of_device_get_match_data(&pdev->dev);
++	if (!desc)
++		return -EINVAL;
++
++	rpm_clks = desc->clks;
++	num_clks = desc->num_clks;
++
++	rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
++			   GFP_KERNEL);
++	if (!rcc)
++		return -ENOMEM;
++
++	hws = rcc->hws;
++	data = &rcc->data;
++	data->num = num_clks;
++
++	for (i = 0; i < num_clks; i++) {
++		if (!rpm_clks[i])
++			continue;
++
++		rpm_clks[i]->rpm = rpm;
++
++		ret = clk_rpm_handoff(rpm_clks[i]);
++		if (ret)
++			goto err;
++	}
++
++	for (i = 0; i < num_clks; i++) {
++		if (!rpm_clks[i]) {
++			data->hws[i] = ERR_PTR(-ENOENT);
++			continue;
++		}
++
++		ret = devm_clk_hw_register(&pdev->dev, &rpm_clks[i]->hw);
++		if (ret)
++			goto err;
++		}
++
++	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
++				     data);
++	if (ret)
++		goto err;
++
++	return 0;
++err:
++	dev_err(&pdev->dev, "Error registering RPM Clock driver (%d)\n", ret);
++	return ret;
++}
++
++static int rpm_clk_remove(struct platform_device *pdev)
++{
++	of_clk_del_provider(pdev->dev.of_node);
++	return 0;
++}
++
++static struct platform_driver rpm_clk_driver = {
++	.driver = {
++		.name = "qcom-clk-rpm",
++		.of_match_table = rpm_clk_match_table,
++	},
++	.probe = rpm_clk_probe,
++	.remove = rpm_clk_remove,
++};
++
++static int __init rpm_clk_init(void)
++{
++	return platform_driver_register(&rpm_clk_driver);
++}
++core_initcall(rpm_clk_init);
++
++static void __exit rpm_clk_exit(void)
++{
++	platform_driver_unregister(&rpm_clk_driver);
++}
++module_exit(rpm_clk_exit);
++
++MODULE_DESCRIPTION("Qualcomm RPM Clock Controller Driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:qcom-clk-rpm");
+--- a/include/dt-bindings/clock/qcom,rpmcc.h
++++ b/include/dt-bindings/clock/qcom,rpmcc.h
+@@ -14,6 +14,28 @@
+ #ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
+ #define _DT_BINDINGS_CLK_MSM_RPMCC_H
+ 
++/* ipq806x */
++#define RPM_PXO_CLK				0
++#define RPM_PXO_A_CLK				1
++#define RPM_CXO_CLK				2
++#define RPM_CXO_A_CLK				3
++#define RPM_APPS_FABRIC_CLK			4
++#define RPM_APPS_FABRIC_A_CLK			5
++#define RPM_CFPB_CLK				6
++#define RPM_CFPB_A_CLK				7
++#define RPM_DAYTONA_FABRIC_CLK			8
++#define RPM_DAYTONA_FABRIC_A_CLK		9
++#define RPM_EBI1_CLK				10
++#define RPM_EBI1_A_CLK				11
++#define RPM_NSS_FABRIC_0_CLK			12
++#define RPM_NSS_FABRIC_0_A_CLK			13
++#define RPM_NSS_FABRIC_1_CLK			14
++#define RPM_NSS_FABRIC_1_A_CLK			15
++#define RPM_SYS_FABRIC_CLK			16
++#define RPM_SYS_FABRIC_A_CLK			17
++#define RPM_SFPB_CLK				18
++#define RPM_SFPB_A_CLK				19
++
+ /* msm8916 */
+ #define RPM_SMD_XO_CLK_SRC				0
+ #define RPM_SMD_XO_A_CLK_SRC			1
diff --git a/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch b/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch
new file mode 100644
index 0000000..c8d83e9
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch
@@ -0,0 +1,53 @@
+From patchwork Wed Nov  2 15:56:58 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v9,3/3] clk: qcom: Always add factor clock for xo clocks
+From: Georgi Djakov <georgi.djakov@linaro.org>
+X-Patchwork-Id: 9409421
+Message-Id: <20161102155658.32203-4-georgi.djakov@linaro.org>
+To: sboyd@codeaurora.org, mturquette@baylibre.com
+Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
+ robh+dt@kernel.org, mark.rutland@arm.com,
+ linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
+ georgi.djakov@linaro.org
+Date: Wed,  2 Nov 2016 17:56:58 +0200
+
+Currently the RPM/RPM-SMD clock drivers do not register the xo clocks,
+so we should always add factor clock. When we later add xo clocks support
+into the drivers, we should update this function to skip registration.
+By doing so we avoid any DT dependencies.
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ drivers/clk/qcom/common.c | 15 ++++++---------
+ 1 file changed, 6 insertions(+), 9 deletions(-)
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at  http://vger.kernel.org/majordomo-info.html
+
+--- a/drivers/clk/qcom/common.c
++++ b/drivers/clk/qcom/common.c
+@@ -154,15 +154,12 @@ int qcom_cc_register_board_clk(struct de
+ 			       const char *name, unsigned long rate)
+ {
+ 	bool add_factor = true;
+-	struct device_node *node;
+ 
+-	/* The RPM clock driver will add the factor clock if present */
+-	if (IS_ENABLED(CONFIG_QCOM_RPMCC)) {
+-		node = of_find_compatible_node(NULL, NULL, "qcom,rpmcc");
+-		if (of_device_is_available(node))
+-			add_factor = false;
+-		of_node_put(node);
+-	}
++	/*
++	 * TODO: The RPM clock driver currently does not support the xo clock.
++	 * When xo is added to the RPM clock driver, we should change this
++	 * function to skip registration of xo factor clocks.
++	 */
+ 
+ 	return _qcom_cc_register_board_clk(dev, path, name, rate, add_factor);
+ }
diff --git a/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch b/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch
new file mode 100644
index 0000000..d8bbcf0
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch
@@ -0,0 +1,45 @@
+From 6da1b6260843da455cad8180c18d020679fd4a46 Mon Sep 17 00:00:00 2001
+From: Pavel Kubelun <be.dissent@gmail.com>
+Date: Sun, 6 Nov 2016 19:07:24 +0300
+Subject: [PATCH] ipq806x: add board clocks and rpmcc into DT
+
+Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+index 8c989c0..6b06118 100644
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -92,6 +92,18 @@
+ 	};
+ 
+ 	clocks {
++		cxo_board {
++			compatible = "fixed-clock";
++			#clock-cells = <0>;
++			clock-frequency = <25000000>;
++		};
++
++		pxo_board {
++			compatible = "fixed-clock";
++			#clock-cells = <0>;
++			clock-frequency = <25000000>;
++		};
++
+ 		sleep_clk: sleep_clk {
+ 			compatible = "fixed-clock";
+ 			clock-frequency = <32768>;
+@@ -175,6 +187,11 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 
++			rpmcc: clock-controller {
++				compatible	= "qcom,rpmcc-ipq806x", "qcom,rpmcc";
++				#clock-cells = <1>;
++			};
++
+ 			regulators {
+ 				compatible = "qcom,rpm-smb208-regulators";
+