kernel: update 4.4 kernel to 4.4.42

Refresh patches on all 4.4 supported platforms.
Compile & run tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

6 files changed, 13 insertions, 13 deletions

diff --git a/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch b/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch
index d522bb7..b6f5830 100644
--- a/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch
+++ b/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch
@@ -13,7 +13,7 @@ Signed-off-by: Felipe Balbi <balbi@kernel.org>
 
 --- a/drivers/usb/dwc3/core.h
 +++ b/drivers/usb/dwc3/core.h
-@@ -1021,6 +1021,12 @@ struct dwc3_gadget_ep_cmd_params {
+@@ -1019,6 +1019,12 @@ struct dwc3_gadget_ep_cmd_params {
  void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
  int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
  
diff --git a/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch b/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch
index 0030446..264893d 100644
--- a/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch
+++ b/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch
@@ -14,7 +14,7 @@ Signed-off-by: Felipe Balbi <balbi@kernel.org>
 
 --- a/drivers/usb/dwc3/core.h
 +++ b/drivers/usb/dwc3/core.h
-@@ -222,7 +222,8 @@
+@@ -220,7 +220,8 @@
  /* Global HWPARAMS3 Register */
  #define DWC3_GHWPARAMS3_SSPHY_IFC(n)		((n) & 3)
  #define DWC3_GHWPARAMS3_SSPHY_IFC_DIS		0
@@ -24,7 +24,7 @@ Signed-off-by: Felipe Balbi <balbi@kernel.org>
  #define DWC3_GHWPARAMS3_HSPHY_IFC(n)		(((n) & (3 << 2)) >> 2)
  #define DWC3_GHWPARAMS3_HSPHY_IFC_DIS		0
  #define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI		1
-@@ -248,6 +249,7 @@
+@@ -246,6 +247,7 @@
  #define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
  
  #define DWC3_DCFG_SPEED_MASK	(7 << 0)
@@ -32,7 +32,7 @@ Signed-off-by: Felipe Balbi <balbi@kernel.org>
  #define DWC3_DCFG_SUPERSPEED	(4 << 0)
  #define DWC3_DCFG_HIGHSPEED	(0 << 0)
  #define DWC3_DCFG_FULLSPEED2	(1 << 0)
-@@ -338,6 +340,7 @@
+@@ -336,6 +338,7 @@
  
  #define DWC3_DSTS_CONNECTSPD		(7 << 0)
  
diff --git a/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch b/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch
index a6510d8..132d131 100644
--- a/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch
+++ b/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch
@@ -82,7 +82,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
  
 --- a/drivers/usb/dwc3/core.h
 +++ b/drivers/usb/dwc3/core.h
-@@ -707,9 +707,7 @@ struct dwc3_scratchpad_array {
+@@ -705,9 +705,7 @@ struct dwc3_scratchpad_array {
   * 	0	- utmi_sleep_n
   * 	1	- utmi_l1_suspend_n
   * @is_fpga: true when we are using the FPGA board
@@ -92,7 +92,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
   * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
   * @start_config_issued: true when StartConfig command has been issued
   * @three_stage_setup: set if we perform a three phase setup
-@@ -852,9 +850,7 @@ struct dwc3 {
+@@ -850,9 +848,7 @@ struct dwc3 {
  	unsigned		has_lpm_erratum:1;
  	unsigned		is_utmi_l1_suspend:1;
  	unsigned		is_fpga:1;
@@ -102,7 +102,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
  	unsigned		setup_packet_pending:1;
  	unsigned		three_stage_setup:1;
  	unsigned		usb3_lpm_capable:1;
-@@ -1022,7 +1018,6 @@ struct dwc3_gadget_ep_cmd_params {
+@@ -1020,7 +1016,6 @@ struct dwc3_gadget_ep_cmd_params {
  
  /* prototypes */
  void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
@@ -112,7 +112,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
  static inline bool dwc3_is_usb31(struct dwc3 *dwc)
 --- a/drivers/usb/dwc3/ep0.c
 +++ b/drivers/usb/dwc3/ep0.c
-@@ -583,9 +583,6 @@ static int dwc3_ep0_set_config(struct dw
+@@ -587,9 +587,6 @@ static int dwc3_ep0_set_config(struct dw
  			reg = dwc3_readl(dwc->regs, DWC3_DCTL);
  			reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA);
  			dwc3_writel(dwc->regs, DWC3_DCTL, reg);
@@ -122,7 +122,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
  		}
  		break;
  
-@@ -1020,12 +1017,6 @@ static int dwc3_ep0_start_control_status
+@@ -1028,12 +1025,6 @@ static int dwc3_ep0_start_control_status
  
  static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
  {
diff --git a/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch b/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch
index 32ff364..5067548 100644
--- a/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch
+++ b/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch
@@ -143,7 +143,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
  static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc)
 --- a/drivers/usb/dwc3/core.h
 +++ b/drivers/usb/dwc3/core.h
-@@ -665,7 +665,6 @@ struct dwc3_scratchpad_array {
+@@ -663,7 +663,6 @@ struct dwc3_scratchpad_array {
   * @regs: base address for our registers
   * @regs_size: address space size
   * @nr_scratch: number of scratch buffers
@@ -151,7 +151,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
   * @u1u2: only used on revisions <1.83a for workaround
   * @maximum_speed: maximum speed requested (mainly for testing purposes)
   * @revision: revision register contents
-@@ -775,7 +774,6 @@ struct dwc3 {
+@@ -773,7 +772,6 @@ struct dwc3 {
  	u32			gctl;
  
  	u32			nr_scratch;
diff --git a/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch b/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch
index 34f4211..827b621 100644
--- a/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch
+++ b/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch
@@ -65,7 +65,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
  
 --- a/drivers/usb/dwc3/core.h
 +++ b/drivers/usb/dwc3/core.h
-@@ -750,7 +750,7 @@ struct dwc3 {
+@@ -748,7 +748,7 @@ struct dwc3 {
  	struct platform_device	*xhci;
  	struct resource		xhci_resources[DWC3_XHCI_RESOURCES_NUM];
  
diff --git a/target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch b/target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch
index 4d90798..b140787 100644
--- a/target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch
+++ b/target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch
@@ -34,7 +34,7 @@ MAINTAINERS                  |    7 +
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -8253,6 +8253,13 @@ S:	Maintained
+@@ -8248,6 +8248,13 @@ S:	Maintained
  F:	Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
  F:	drivers/pci/host/pcie-hisi.c