ipq806x: update DT in accordance to new drivers And add some more DT nodes

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

7 files changed, 90 insertions, 214 deletions

diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
index 42281c4..cae5fdc 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -7,18 +7,19 @@
 #include <dt-bindings/soc/qcom,gsbi.h>
 #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Qualcomm IPQ8065";
-	compatible = "qcom,ipq8065";
+	compatible = "qcom,ipq8065", "qcom,ipq8064";
 	interrupt-parent = <&intc>;
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
@@ -26,82 +27,18 @@
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
-			clocks = <&kraitcc 0>;
-			clock-names = "cpu";
+			clocks = <&kraitcc 0>, <&kraitcc 4>;
+			clock-names = "cpu", "l2";
 			qcom,imem = <&imem>;
 			clock-latency = <100000>;
-			core-supply = <&smb208_s2a>;
+			cpu-supply = <&smb208_s2a>;
 			voltage-tolerance = <5>;
 			cooling-min-state = <0>;
 			cooling-max-state = <10>;
 			#cooling-cells = <2>;
-
-			operating-points-0-0 = <
-				/* kHz      uV */
-				1725000 1262500
-				1400000 1175000
-				1000000 1100000
-				 800000 1050000
-				 600000 1000000
- 				 384000 975000
- 			>;
-			operating-points-0-1 = <
-				/* kHz      uV */
-				1725000 1262500
-				1400000 1175000
-				1000000 1100000
-				 800000 1050000
-				 600000 1000000
- 				 384000 950000
-			>;
-			operating-points-0-2 = <
-				/* kHz      uV */
-				1725000 1200000
-				1400000 1125000
-				1000000 1050000
-				 800000 1000000
-				 600000 950000
- 				 384000 925000
-			>;
-			operating-points-0-3 = <
-				/* kHz      uV */
-				1725000 1175000
-				1400000 1100000
-				1000000 1025000
-				 800000 975000
-				 600000 925000
- 				 384000 900000
-			>;
-			operating-points-0-4 = <
-				/* kHz      uV */
-				1725000 1150000
-				1400000 1075000
-				1000000 1000000
-				 800000 950000
-				 600000 900000
- 				 384000 875000
-			>;
-			operating-points-0-5 = <
-				/* kHz      uV */
-				1725000 1100000
-				1400000 1025000
-				1000000 950000
-				 800000 900000
-				 600000 850000
- 				 384000 825000
-			>;
-			operating-points-0-6 = <
-				/* kHz      uV */
-				1725000 1050000
-				1400000 975000
-				1000000 900000
-				 800000 850000
-				 600000 800000
- 				 384000 775000
-			>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
@@ -109,92 +46,24 @@
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
-			clocks = <&kraitcc 1>;
-			clock-names = "cpu";
+			clocks = <&kraitcc 1>, <&kraitcc 4>;
+			clock-names = "cpu", "l2";
 			qcom,imem = <&imem>;
 			clock-latency = <100000>;
-			core-supply = <&smb208_s2b>;
+			cpu-supply = <&smb208_s2b>;
 			cooling-min-state = <0>;
 			cooling-max-state = <10>;
 			#cooling-cells = <2>;
-
-			operating-points-0-0 = <
-				/* kHz      uV */
-				1725000 1262500
-				1400000 1175000
-				1000000 1100000
-				 800000 1050000
-				 600000 1000000
- 				 384000 975000
- 			>;
-			operating-points-0-1 = <
-				/* kHz      uV */
-				1725000 1262500
-				1400000 1175000
-				1000000 1100000
-				 800000 1050000
-				 600000 1000000
- 				 384000 950000
-			>;
-			operating-points-0-2 = <
-				/* kHz      uV */
-				1725000 1200000
-				1400000 1125000
-				1000000 1050000
-				 800000 1000000
-				 600000 950000
- 				 384000 925000
-			>;
-			operating-points-0-3 = <
-				/* kHz      uV */
-				1725000 1175000
-				1400000 1100000
-				1000000 1025000
-				 800000 975000
-				 600000 925000
- 				 384000 900000
-			>;
-			operating-points-0-4 = <
-				/* kHz      uV */
-				1725000 1150000
-				1400000 1075000
-				1000000 1000000
-				 800000 950000
-				 600000 900000
- 				 384000 875000
-			>;
-			operating-points-0-5 = <
-				/* kHz      uV */
-				1725000 1100000
-				1400000 1025000
-				1000000 950000
-				 800000 900000
-				 600000 850000
- 				 384000 825000
-			>;
-			operating-points-0-6 = <
-				/* kHz      uV */
-				1725000 1050000
-				1400000 975000
-				1000000 900000
-				 800000 850000
-				 600000 800000
- 				 384000 775000
-			>;
 		};
 
 		L2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
-			clocks = <&kraitcc 4>;
-			clock-names = "cache";
-			cache-points-kHz = <
-				/* kHz    uV    CPU kHz */
-				1200000 1150000 1200000
-				1000000 1100000  600000
-				 384000 1100000  384000
-			>;
-			vdd_dig-supply = <&smb208_s1a>;
+			qcom,saw = <&saw_l2>;
+		};
+
+		qcom,l2 {
+			qcom,l2-rates = <384000000 1000000000 1200000000>;
 		};
 	};
 
@@ -357,48 +226,6 @@
 					qcom,switch-mode-frequency = <1200000>;
 				};
 			};
-
-			rpm_clocks {
-				#clock-cells = <0>;
-				compatible = "qcom,rpm-clk";
-				qcom,rpm-clk-active-only;
-
-				cxo_clk: cxo {
-					reg = <QCOM_RPM_CXO_CLK>;
-					qcom,rpm-clk-name = "cxo";
-					qcom,rpm-clk-freq = <25000000>;
-				};
-
-				pxo_clk: pxo {
-					reg = <QCOM_RPM_PXO_CLK>;
-					qcom,rpm-clk-name = "pxo";
-					qcom,rpm-clk-freq = <25000000>;
-				};
-
-				ebi1_clk: ebi1 {
-					reg = <QCOM_RPM_EBI1_CLK>;
-					qcom,rpm-clk-name = "ebi1";
-					qcom,rpm-clk-freq = <533000000>;
-				};
-
-				apps_fabric_clk: apps-fabric {
-					reg = <QCOM_RPM_APPS_FABRIC_CLK>;
-					qcom,rpm-clk-name = "apps-fabric";
-					qcom,rpm-clk-freq = <533000000>;
-				};
-
-				nss_fabric0_clk: nss-fabric0 {
-					reg = <QCOM_RPM_NSS_FABRIC_0_CLK>;
-					qcom,rpm-clk-name = "nss-fabric0";
-					qcom,rpm-clk-freq = <533000000>;
-				};
-
-				nss_fabric1_clk: nss-fabric1 {
-					reg = <QCOM_RPM_NSS_FABRIC_1_CLK>;
-					qcom,rpm-clk-name = "nss-fabric1";
-					qcom,rpm-clk-freq = <266000000>;
-				};
-			};
 		};
 
 		rng@1a500000 {
@@ -511,17 +338,28 @@
  		};
 
 		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
+			compatible = "qcom,saw2", "syscon";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 			regulator;
 		};
 
 		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
+			compatible = "qcom,saw2", "syscon";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 			regulator;
 		};
 
+		saw_l2: regulator@02012000 {
+			compatible = "qcom,saw2", "syscon";
+			reg = <0x02012000 0x1000>;
+			regulator;
+		};
+ 
+		sic_non_secure: sic-non-secure@12100000 {
+			compatible = "syscon";
+			reg = <0x12100000 0x10000>;
+		};
+
 		gsbi1: gsbi@12440000 {
 			compatible = "qcom,gsbi-v1.0.0";
 			cell-index = <1>;
@@ -817,6 +655,7 @@
 			reg = <0x00900000 0x4000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 		};
 
 		lcc: clock-controller@28000000 {
@@ -1103,7 +942,7 @@
 		adm_dma: dma@18300000 {
 			compatible = "qcom,adm";
 			reg = <0x18300000 0x100000>;
-			interrupts = <0 170 0>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
 			#dma-cells = <1>;
 
 			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
@@ -1221,6 +1060,7 @@
 
 			status = "disabled";
 		};
+
 		/* Temporary fixed regulator */
 		vsdcc_fixed: vsdcc-regulator {
 			compatible = "regulator-fixed";
@@ -1294,7 +1134,6 @@
 				#dma-names = "tx", "rx";
 			};
 		};
-
 	};
 
 	sfpb_mutex: sfpb-mutex {
diff --git a/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch b/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
index aaf1401..6ca3c62 100644
--- a/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
+++ b/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
@@ -4,40 +4,36 @@
  			next-level-cache = <&L2>;
  			qcom,acc = <&acc0>;
  			qcom,saw = <&saw0>;
-+			clocks = <&kraitcc 0>;
-+			clock-names = "cpu";
++			clocks = <&kraitcc 0>, <&kraitcc 4>;
++			clock-names = "cpu", "l2";
 +			clock-latency = <100000>;
-+			core-supply = <&smb208_s2a>;
++			cpu-supply = <&smb208_s2a>;
 +			voltage-tolerance = <5>;
  		};
  
  		cpu@1 {
-@@ -36,11 +41,24 @@
+@@ -36,12 +41,20 @@
  			next-level-cache = <&L2>;
  			qcom,acc = <&acc1>;
  			qcom,saw = <&saw1>;
-+			clocks = <&kraitcc 1>;
-+			clock-names = "cpu";
++			clocks = <&kraitcc 1>, <&kraitcc 4>;
++			clock-names = "cpu", "l2";
 +			clock-latency = <100000>;
-+			core-supply = <&smb208_s2b>;
++			cpu-supply = <&smb208_s2b>;
  		};
  
  		L2: l2-cache {
  			compatible = "cache";
  			cache-level = <2>;
-+			clocks = <&kraitcc 4>;
-+			clock-names = "cache";
-+			cache-points-kHz = <
-+				/* kHz    uV    CPU kHz */
-+				1200000 1150000 1200000
-+				1000000 1100000  600000
-+				 384000 1100000  384000
-+			>;
-+			vdd_dig-supply = <&smb208_s1a>;
  		};
++
++		qcom,l2 {
++			qcom,l2-rates = <384000000 1000000000 1200000000>;
++		};
  	};
  
-@@ -73,6 +91,46 @@
+ 	cpu-pmu {
+@@ -73,6 +86,46 @@
  		};
  	};
  
@@ -84,7 +80,7 @@
  	soc: soc {
  		#address-cells = <1>;
  		#size-cells = <1>;
-@@ -215,11 +273,13 @@
+@@ -215,11 +268,13 @@
  		acc0: clock-controller@2088000 {
  			compatible = "qcom,kpss-acc-v1";
  			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
diff --git a/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch b/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
index b8abd0a..5fc2a3d 100644
--- a/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
+++ b/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
@@ -13,7 +13,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
 
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -727,6 +727,26 @@
+@@ -722,6 +722,26 @@
  
  			status = "disabled";
  		};
diff --git a/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch b/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
index 4fc8a8c..bd8c7e7 100644
--- a/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
+++ b/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
@@ -26,7 +26,7 @@ arch/arm/boot/dts/qcom-ipq8064.dtsi | 15 +++++++++++++++
 
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -747,6 +747,22 @@
+@@ -742,6 +742,22 @@
  
  			status = "disabled";
  		};
diff --git a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch b/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch
index a3a0583..1a15a8c 100644
--- a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch
+++ b/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch
@@ -4,7 +4,7 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
 
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -167,45 +167,37 @@
+@@ -162,45 +162,37 @@
  			#address-cells = <1>;
  			#size-cells = <0>;
  
diff --git a/target/linux/ipq806x/patches-4.4/176-add-saw_l2-into-ipq8064-DT.patch b/target/linux/ipq806x/patches-4.4/176-add-saw_l2-into-ipq8064-DT.patch
new file mode 100644
index 0000000..d4f6c68
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/176-add-saw_l2-into-ipq8064-DT.patch
@@ -0,0 +1,41 @@
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -50,6 +50,7 @@
+ 		L2: l2-cache {
+ 			compatible = "cache";
+ 			cache-level = <2>;
++			qcom,saw = <&saw_l2>;
+ 		};
+ 
+ 		qcom,l2 {
+@@ -276,17 +277,28 @@
+  		};
+ 
+ 		saw0: regulator@2089000 {
+-			compatible = "qcom,saw2";
++			compatible = "qcom,saw2", "syscon";
+ 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+ 			regulator;
+ 		};
+ 
+ 		saw1: regulator@2099000 {
+-			compatible = "qcom,saw2";
++			compatible = "qcom,saw2", "syscon";
+ 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+ 			regulator;
+ 		};
+ 
++		saw_l2: regulator@02012000 {
++			compatible = "qcom,saw2", "syscon";
++			reg = <0x02012000 0x1000>;
++			regulator;
++		};
++ 
++		sic_non_secure: sic-non-secure@12100000 {
++			compatible = "syscon";
++			reg = <0x12100000 0x10000>;
++		};
++
+ 		gsbi2: gsbi@12480000 {
+ 			compatible = "qcom,gsbi-v1.0.0";
+ 			cell-index = <2>;
diff --git a/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
index d85d8b0..dcdec66 100644
--- a/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
+++ b/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
@@ -121,7 +121,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
  };
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -755,6 +755,92 @@
+@@ -762,6 +762,92 @@
  
  			status = "disabled";
  		};