summaryrefslogtreecommitdiff
path: root/target/linux/ipq806x
diff options
context:
space:
mode:
authordissent1 <be.dissent+github@gmail.com>2016-11-03 18:07:31 +0300
committerJohn Crispin <john@phrozen.org>2016-11-16 10:59:30 +0100
commit07d0c1b947e6bbda527ee47458aa3964359d5644 (patch)
tree45aa9e06aa6c307e1a9d3db17845ac70d59d8178 /target/linux/ipq806x
parent506dc815b9fc6869402c6a0157a1bdf27a89b9a3 (diff)
downloadmtk-20170518-07d0c1b947e6bbda527ee47458aa3964359d5644.zip
mtk-20170518-07d0c1b947e6bbda527ee47458aa3964359d5644.tar.gz
mtk-20170518-07d0c1b947e6bbda527ee47458aa3964359d5644.tar.bz2
ipq806x: add support for RPM clock controller
The patch #179 for RPM has initially been made for apq806x board. It has been modified to support ipq806x instead of apq8064. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Diffstat (limited to 'target/linux/ipq806x')
-rw-r--r--target/linux/ipq806x/config-4.42
-rw-r--r--target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi18
-rw-r--r--target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch183
-rw-r--r--target/linux/ipq806x/patches-4.4/178-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch746
-rw-r--r--target/linux/ipq806x/patches-4.4/179-clk-qcom-Add-support-for-RPM-Clocks.patch598
-rw-r--r--target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch53
-rw-r--r--target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch45
7 files changed, 1645 insertions, 0 deletions
diff --git a/target/linux/ipq806x/config-4.4 b/target/linux/ipq806x/config-4.4
index 7094965..a392cb2 100644
--- a/target/linux/ipq806x/config-4.4
+++ b/target/linux/ipq806x/config-4.4
@@ -341,11 +341,13 @@ CONFIG_PRINTK_TIME=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_QCOM_ADM=y
CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_CLK_RPM=y
CONFIG_QCOM_GDSC=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_HFPLL=y
CONFIG_QCOM_PM=y
CONFIG_QCOM_QFPROM=y
+CONFIG_QCOM_RPMCC=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_32=y
# CONFIG_QCOM_SMD is not set
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
index fcc08d9..f2d310e 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -101,6 +101,19 @@
};
clocks {
+
+ cxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ pxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
sleep_clk: sleep_clk {
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -211,6 +224,11 @@
#address-cells = <1>;
#size-cells = <0>;
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
smb208_regulators {
compatible = "qcom,rpm-smb208-regulators";
diff --git a/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch b/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch
new file mode 100644
index 0000000..60505e1
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch
@@ -0,0 +1,183 @@
+From a085f877a882b465fce74188c9d8efd12bd5acd4 Mon Sep 17 00:00:00 2001
+From: Stephen Boyd <sboyd@codeaurora.org>
+Date: Mon, 26 Oct 2015 18:10:09 -0700
+Subject: clk: qcom: Move cxo/pxo/xo into dt files
+
+Put these clocks into the dt files instead of registering them
+from C code. This provides a few benefits. It allows us to
+specify the frequency of these clocks at the board level instead
+of hard-coding them in the driver. It allows us to insert an RPM
+clock in between the consumers of the crystals and the actual
+clock. And finally, it helps us transition the GCC driver to use
+RPM clocks when that configuration is enabled.
+
+Cc: Georgi Djakov <georgi.djakov@linaro.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/qcom/gcc-apq8084.c | 16 +++++++---------
+ drivers/clk/qcom/gcc-ipq806x.c | 14 ++++++--------
+ drivers/clk/qcom/gcc-msm8660.c | 15 +++++++--------
+ drivers/clk/qcom/gcc-msm8960.c | 14 ++++++--------
+ drivers/clk/qcom/gcc-msm8974.c | 17 +++++++----------
+ 5 files changed, 33 insertions(+), 43 deletions(-)
+
+diff --git a/drivers/clk/qcom/gcc-apq8084.c b/drivers/clk/qcom/gcc-apq8084.c
+index 1567c3a..070037a 100644
+--- a/drivers/clk/qcom/gcc-apq8084.c
++++ b/drivers/clk/qcom/gcc-apq8084.c
+@@ -3607,18 +3607,16 @@ MODULE_DEVICE_TABLE(of, gcc_apq8084_match_table);
+
+ static int gcc_apq8084_probe(struct platform_device *pdev)
+ {
+- struct clk *clk;
++ int ret;
+ struct device *dev = &pdev->dev;
+
+- /* Temporary until RPM clocks supported */
+- clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
+- if (IS_ERR(clk))
+- return PTR_ERR(clk);
++ ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000);
++ if (ret)
++ return ret;
+
+- clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL,
+- CLK_IS_ROOT, 32768);
+- if (IS_ERR(clk))
+- return PTR_ERR(clk);
++ ret = qcom_cc_register_sleep_clk(dev);
++ if (ret)
++ return ret;
+
+ return qcom_cc_probe(pdev, &gcc_apq8084_desc);
+ }
+diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
+index 16fc64c..dd5402b 100644
+--- a/drivers/clk/qcom/gcc-ipq806x.c
++++ b/drivers/clk/qcom/gcc-ipq806x.c
+@@ -3023,19 +3023,17 @@ MODULE_DEVICE_TABLE(of, gcc_ipq806x_match_table);
+
+ static int gcc_ipq806x_probe(struct platform_device *pdev)
+ {
+- struct clk *clk;
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ int ret;
+
+- /* Temporary until RPM clocks supported */
+- clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000);
+- if (IS_ERR(clk))
+- return PTR_ERR(clk);
++ ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 25000000);
++ if (ret)
++ return ret;
+
+- clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 25000000);
+- if (IS_ERR(clk))
+- return PTR_ERR(clk);
++ ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 25000000);
++ if (ret)
++ return ret;
+
+ ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+ if (ret)
+diff --git a/drivers/clk/qcom/gcc-msm8660.c b/drivers/clk/qcom/gcc-msm8660.c
+index f110bb5..ad41303 100644
+--- a/drivers/clk/qcom/gcc-msm8660.c
++++ b/drivers/clk/qcom/gcc-msm8660.c
+@@ -2720,17 +2720,16 @@ MODULE_DEVICE_TABLE(of, gcc_msm8660_match_table);
+
+ static int gcc_msm8660_probe(struct platform_device *pdev)
+ {
+- struct clk *clk;
++ int ret;
+ struct device *dev = &pdev->dev;
+
+- /* Temporary until RPM clocks supported */
+- clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
+- if (IS_ERR(clk))
+- return PTR_ERR(clk);
++ ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000);
++ if (ret)
++ return ret;
+
+- clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000);
+- if (IS_ERR(clk))
+- return PTR_ERR(clk);
++ ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000);
++ if (ret)
++ return ret;
+
+ return qcom_cc_probe(pdev, &gcc_msm8660_desc);
+ }
+diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
+index 66c18bc..983dd7d 100644
+--- a/drivers/clk/qcom/gcc-msm8960.c
++++ b/drivers/clk/qcom/gcc-msm8960.c
+@@ -3503,7 +3503,6 @@ MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table);
+
+ static int gcc_msm8960_probe(struct platform_device *pdev)
+ {
+- struct clk *clk;
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *match;
+ struct platform_device *tsens;
+@@ -3513,14 +3512,13 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
+ if (!match)
+ return -EINVAL;
+
+- /* Temporary until RPM clocks supported */
+- clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
+- if (IS_ERR(clk))
+- return PTR_ERR(clk);
++ ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000);
++ if (ret)
++ return ret;
+
+- clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000);
+- if (IS_ERR(clk))
+- return PTR_ERR(clk);
++ ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000);
++ if (ret)
++ return ret;
+
+ ret = qcom_cc_probe(pdev, match->data);
+ if (ret)
+diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c
+index 28abb8f..335952d 100644
+--- a/drivers/clk/qcom/gcc-msm8974.c
++++ b/drivers/clk/qcom/gcc-msm8974.c
+@@ -2717,7 +2717,7 @@ static void msm8974_pro_clock_override(void)
+
+ static int gcc_msm8974_probe(struct platform_device *pdev)
+ {
+- struct clk *clk;
++ int ret;
+ struct device *dev = &pdev->dev;
+ bool pro;
+ const struct of_device_id *id;
+@@ -2730,16 +2730,13 @@ static int gcc_msm8974_probe(struct platform_device *pdev)
+ if (pro)
+ msm8974_pro_clock_override();
+
+- /* Temporary until RPM clocks supported */
+- clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
+- if (IS_ERR(clk))
+- return PTR_ERR(clk);
++ ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000);
++ if (ret)
++ return ret;
+
+- /* Should move to DT node? */
+- clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL,
+- CLK_IS_ROOT, 32768);
+- if (IS_ERR(clk))
+- return PTR_ERR(clk);
++ ret = qcom_cc_register_sleep_clk(dev);
++ if (ret)
++ return ret;
+
+ return qcom_cc_probe(pdev, &gcc_msm8974_desc);
+ }
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/178-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch b/target/linux/ipq806x/patches-4.4/178-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch
new file mode 100644
index 0000000..8126c7c
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/178-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch
@@ -0,0 +1,746 @@
+From patchwork Wed Nov 2 15:56:56 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v9,1/3] clk: qcom: Add support for SMD-RPM Clocks
+From: Georgi Djakov <georgi.djakov@linaro.org>
+X-Patchwork-Id: 9409419
+Message-Id: <20161102155658.32203-2-georgi.djakov@linaro.org>
+To: sboyd@codeaurora.org, mturquette@baylibre.com
+Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
+ robh+dt@kernel.org, mark.rutland@arm.com,
+ linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
+ georgi.djakov@linaro.org
+Date: Wed, 2 Nov 2016 17:56:56 +0200
+
+This adds initial support for clocks controlled by the Resource
+Power Manager (RPM) processor on some Qualcomm SoCs, which use
+the qcom_smd_rpm driver to communicate with RPM.
+Such platforms are msm8916, apq8084 and msm8974.
+
+The RPM is a dedicated hardware engine for managing the shared
+SoC resources in order to keep the lowest power profile. It
+communicates with other hardware subsystems via shared memory
+and accepts clock requests, aggregates the requests and turns
+the clocks on/off or scales them on demand.
+
+This driver is based on the codeaurora.org driver:
+https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ .../devicetree/bindings/clock/qcom,rpmcc.txt | 36 ++
+ drivers/clk/qcom/Kconfig | 16 +
+ drivers/clk/qcom/Makefile | 1 +
+ drivers/clk/qcom/clk-smd-rpm.c | 571 +++++++++++++++++++++
+ include/dt-bindings/clock/qcom,rpmcc.h | 45 ++
+ 5 files changed, 669 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+ create mode 100644 drivers/clk/qcom/clk-smd-rpm.c
+ create mode 100644 include/dt-bindings/clock/qcom,rpmcc.h
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+@@ -0,0 +1,36 @@
++Qualcomm RPM Clock Controller Binding
++------------------------------------------------
++The RPM is a dedicated hardware engine for managing the shared
++SoC resources in order to keep the lowest power profile. It
++communicates with other hardware subsystems via shared memory
++and accepts clock requests, aggregates the requests and turns
++the clocks on/off or scales them on demand.
++
++Required properties :
++- compatible : shall contain only one of the following. The generic
++ compatible "qcom,rpmcc" should be also included.
++
++ "qcom,rpmcc-msm8916", "qcom,rpmcc"
++
++- #clock-cells : shall contain 1
++
++Example:
++ smd {
++ compatible = "qcom,smd";
++
++ rpm {
++ interrupts = <0 168 1>;
++ qcom,ipc = <&apcs 8 0>;
++ qcom,smd-edge = <15>;
++
++ rpm_requests {
++ compatible = "qcom,rpm-msm8916";
++ qcom,smd-channels = "rpm_requests";
++
++ rpmcc: clock-controller {
++ compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
++ #clock-cells = <1>;
++ };
++ };
++ };
++ };
+--- a/drivers/clk/qcom/Kconfig
++++ b/drivers/clk/qcom/Kconfig
+@@ -2,6 +2,9 @@ config QCOM_GDSC
+ bool
+ select PM_GENERIC_DOMAINS if PM
+
++config QCOM_RPMCC
++ bool
++
+ config COMMON_CLK_QCOM
+ tristate "Support for Qualcomm's clock controllers"
+ depends on OF
+@@ -9,6 +12,19 @@ config COMMON_CLK_QCOM
+ select REGMAP_MMIO
+ select RESET_CONTROLLER
+
++config QCOM_CLK_SMD_RPM
++ tristate "RPM over SMD based Clock Controller"
++ depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
++ select QCOM_RPMCC
++ help
++ The RPM (Resource Power Manager) is a dedicated hardware engine for
++ managing the shared SoC resources in order to keep the lowest power
++ profile. It communicates with other hardware subsystems via shared
++ memory and accepts clock requests, aggregates the requests and turns
++ the clocks on/off or scales them on demand.
++ Say Y if you want to support the clocks exposed by the RPM on
++ platforms such as apq8016, apq8084, msm8974 etc.
++
+ config APQ_GCC_8084
+ tristate "APQ8084 Global Clock Controller"
+ select QCOM_GDSC
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -28,3 +28,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8
+ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+ obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
+ obj-$(CONFIG_KRAITCC) += krait-cc.o
++obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
+--- /dev/null
++++ b/drivers/clk/qcom/clk-smd-rpm.c
+@@ -0,0 +1,571 @@
++/*
++ * Copyright (c) 2016, Linaro Limited
++ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/err.h>
++#include <linux/export.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++#include <linux/soc/qcom/smd-rpm.h>
++
++#include <dt-bindings/clock/qcom,rpmcc.h>
++#include <dt-bindings/mfd/qcom-rpm.h>
++
++#define QCOM_RPM_KEY_SOFTWARE_ENABLE 0x6e657773
++#define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY 0x62636370
++#define QCOM_RPM_SMD_KEY_RATE 0x007a484b
++#define QCOM_RPM_SMD_KEY_ENABLE 0x62616e45
++#define QCOM_RPM_SMD_KEY_STATE 0x54415453
++#define QCOM_RPM_SCALING_ENABLE_ID 0x2
++
++#define __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, stat_id, \
++ key) \
++ static struct clk_smd_rpm _platform##_##_active; \
++ static struct clk_smd_rpm _platform##_##_name = { \
++ .rpm_res_type = (type), \
++ .rpm_clk_id = (r_id), \
++ .rpm_status_id = (stat_id), \
++ .rpm_key = (key), \
++ .peer = &_platform##_##_active, \
++ .rate = INT_MAX, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_smd_rpm_ops, \
++ .name = #_name, \
++ .parent_names = (const char *[]){ "xo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }; \
++ static struct clk_smd_rpm _platform##_##_active = { \
++ .rpm_res_type = (type), \
++ .rpm_clk_id = (r_id), \
++ .rpm_status_id = (stat_id), \
++ .active_only = true, \
++ .rpm_key = (key), \
++ .peer = &_platform##_##_name, \
++ .rate = INT_MAX, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_smd_rpm_ops, \
++ .name = #_active, \
++ .parent_names = (const char *[]){ "xo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }
++
++#define __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, \
++ stat_id, r, key) \
++ static struct clk_smd_rpm _platform##_##_active; \
++ static struct clk_smd_rpm _platform##_##_name = { \
++ .rpm_res_type = (type), \
++ .rpm_clk_id = (r_id), \
++ .rpm_status_id = (stat_id), \
++ .rpm_key = (key), \
++ .branch = true, \
++ .peer = &_platform##_##_active, \
++ .rate = (r), \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_smd_rpm_branch_ops, \
++ .name = #_name, \
++ .parent_names = (const char *[]){ "xo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }; \
++ static struct clk_smd_rpm _platform##_##_active = { \
++ .rpm_res_type = (type), \
++ .rpm_clk_id = (r_id), \
++ .rpm_status_id = (stat_id), \
++ .active_only = true, \
++ .rpm_key = (key), \
++ .branch = true, \
++ .peer = &_platform##_##_name, \
++ .rate = (r), \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_smd_rpm_branch_ops, \
++ .name = #_active, \
++ .parent_names = (const char *[]){ "xo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }
++
++#define DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id) \
++ __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \
++ 0, QCOM_RPM_SMD_KEY_RATE)
++
++#define DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, r) \
++ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, \
++ r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE)
++
++#define DEFINE_CLK_SMD_RPM_QDSS(_platform, _name, _active, type, r_id) \
++ __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \
++ 0, QCOM_RPM_SMD_KEY_STATE)
++
++#define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id) \
++ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \
++ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \
++ QCOM_RPM_KEY_SOFTWARE_ENABLE)
++
++#define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active, r_id) \
++ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \
++ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \
++ QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
++
++#define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)
++
++struct clk_smd_rpm {
++ const int rpm_res_type;
++ const int rpm_key;
++ const int rpm_clk_id;
++ const int rpm_status_id;
++ const bool active_only;
++ bool enabled;
++ bool branch;
++ struct clk_smd_rpm *peer;
++ struct clk_hw hw;
++ unsigned long rate;
++ struct qcom_smd_rpm *rpm;
++};
++
++struct clk_smd_rpm_req {
++ __le32 key;
++ __le32 nbytes;
++ __le32 value;
++};
++
++struct rpm_cc {
++ struct qcom_rpm *rpm;
++ struct clk_hw_onecell_data data;
++ struct clk_hw *hws[];
++};
++
++struct rpm_smd_clk_desc {
++ struct clk_smd_rpm **clks;
++ size_t num_clks;
++};
++
++static DEFINE_MUTEX(rpm_smd_clk_lock);
++
++static int clk_smd_rpm_handoff(struct clk_smd_rpm *r)
++{
++ int ret;
++ struct clk_smd_rpm_req req = {
++ .key = cpu_to_le32(r->rpm_key),
++ .nbytes = cpu_to_le32(sizeof(u32)),
++ .value = cpu_to_le32(INT_MAX),
++ };
++
++ ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
++ r->rpm_res_type, r->rpm_clk_id, &req,
++ sizeof(req));
++ if (ret)
++ return ret;
++ ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
++ r->rpm_res_type, r->rpm_clk_id, &req,
++ sizeof(req));
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static int clk_smd_rpm_set_rate_active(struct clk_smd_rpm *r,
++ unsigned long rate)
++{
++ struct clk_smd_rpm_req req = {
++ .key = cpu_to_le32(r->rpm_key),
++ .nbytes = cpu_to_le32(sizeof(u32)),
++ .value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
++ };
++
++ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
++ r->rpm_res_type, r->rpm_clk_id, &req,
++ sizeof(req));
++}
++
++static int clk_smd_rpm_set_rate_sleep(struct clk_smd_rpm *r,
++ unsigned long rate)
++{
++ struct clk_smd_rpm_req req = {
++ .key = cpu_to_le32(r->rpm_key),
++ .nbytes = cpu_to_le32(sizeof(u32)),
++ .value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
++ };
++
++ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
++ r->rpm_res_type, r->rpm_clk_id, &req,
++ sizeof(req));
++}
++
++static void to_active_sleep(struct clk_smd_rpm *r, unsigned long rate,
++ unsigned long *active, unsigned long *sleep)
++{
++ *active = rate;
++
++ /*
++ * Active-only clocks don't care what the rate is during sleep. So,
++ * they vote for zero.
++ */
++ if (r->active_only)
++ *sleep = 0;
++ else
++ *sleep = *active;
++}
++
++static int clk_smd_rpm_prepare(struct clk_hw *hw)
++{
++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++ struct clk_smd_rpm *peer = r->peer;
++ unsigned long this_rate = 0, this_sleep_rate = 0;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ unsigned long active_rate, sleep_rate;
++ int ret = 0;
++
++ mutex_lock(&rpm_smd_clk_lock);
++
++ /* Don't send requests to the RPM if the rate has not been set. */
++ if (!r->rate)
++ goto out;
++
++ to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate,
++ &peer_rate, &peer_sleep_rate);
++
++ active_rate = max(this_rate, peer_rate);
++
++ if (r->branch)
++ active_rate = !!active_rate;
++
++ ret = clk_smd_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++ if (r->branch)
++ sleep_rate = !!sleep_rate;
++
++ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ /* Undo the active set vote and restore it */
++ ret = clk_smd_rpm_set_rate_active(r, peer_rate);
++
++out:
++ if (!ret)
++ r->enabled = true;
++
++ mutex_unlock(&rpm_smd_clk_lock);
++
++ return ret;
++}
++
++static void clk_smd_rpm_unprepare(struct clk_hw *hw)
++{
++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++ struct clk_smd_rpm *peer = r->peer;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ unsigned long active_rate, sleep_rate;
++ int ret;
++
++ mutex_lock(&rpm_smd_clk_lock);
++
++ if (!r->rate)
++ goto out;
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate, &peer_rate,
++ &peer_sleep_rate);
++
++ active_rate = r->branch ? !!peer_rate : peer_rate;
++ ret = clk_smd_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
++ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ goto out;
++
++ r->enabled = false;
++
++out:
++ mutex_unlock(&rpm_smd_clk_lock);
++}
++
++static int clk_smd_rpm_set_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long parent_rate)
++{
++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++ struct clk_smd_rpm *peer = r->peer;
++ unsigned long active_rate, sleep_rate;
++ unsigned long this_rate = 0, this_sleep_rate = 0;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ int ret = 0;
++
++ mutex_lock(&rpm_smd_clk_lock);
++
++ if (!r->enabled)
++ goto out;
++
++ to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate,
++ &peer_rate, &peer_sleep_rate);
++
++ active_rate = max(this_rate, peer_rate);
++ ret = clk_smd_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ goto out;
++
++ r->rate = rate;
++
++out:
++ mutex_unlock(&rpm_smd_clk_lock);
++
++ return ret;
++}
++
++static long clk_smd_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long *parent_rate)
++{
++ /*
++ * RPM handles rate rounding and we don't have a way to
++ * know what the rate will be, so just return whatever
++ * rate is requested.
++ */
++ return rate;
++}
++
++static unsigned long clk_smd_rpm_recalc_rate(struct clk_hw *hw,
++ unsigned long parent_rate)
++{
++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
++
++ /*
++ * RPM handles rate rounding and we don't have a way to
++ * know what the rate will be, so just return whatever
++ * rate was set.
++ */
++ return r->rate;
++}
++
++static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
++{
++ int ret;
++ struct clk_smd_rpm_req req = {
++ .key = cpu_to_le32(QCOM_RPM_SMD_KEY_ENABLE),
++ .nbytes = cpu_to_le32(sizeof(u32)),
++ .value = cpu_to_le32(1),
++ };
++
++ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_SLEEP_STATE,
++ QCOM_SMD_RPM_MISC_CLK,
++ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
++ if (ret) {
++ pr_err("RPM clock scaling (sleep set) not enabled!\n");
++ return ret;
++ }
++
++ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_ACTIVE_STATE,
++ QCOM_SMD_RPM_MISC_CLK,
++ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
++ if (ret) {
++ pr_err("RPM clock scaling (active set) not enabled!\n");
++ return ret;
++ }
++
++ pr_debug("%s: RPM clock scaling is enabled\n", __func__);
++ return 0;
++}
++
++static const struct clk_ops clk_smd_rpm_ops = {
++ .prepare = clk_smd_rpm_prepare,
++ .unprepare = clk_smd_rpm_unprepare,
++ .set_rate = clk_smd_rpm_set_rate,
++ .round_rate = clk_smd_rpm_round_rate,
++ .recalc_rate = clk_smd_rpm_recalc_rate,
++};
++
++static const struct clk_ops clk_smd_rpm_branch_ops = {
++ .prepare = clk_smd_rpm_prepare,
++ .unprepare = clk_smd_rpm_unprepare,
++ .round_rate = clk_smd_rpm_round_rate,
++ .recalc_rate = clk_smd_rpm_recalc_rate,
++};
++
++/* msm8916 */
++DEFINE_CLK_SMD_RPM(msm8916, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
++DEFINE_CLK_SMD_RPM(msm8916, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
++DEFINE_CLK_SMD_RPM(msm8916, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
++DEFINE_CLK_SMD_RPM_QDSS(msm8916, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk1, bb_clk1_a, 1);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk2, bb_clk2_a, 2);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk1, rf_clk1_a, 4);
++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk2, rf_clk2_a, 5);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk1_pin, bb_clk1_a_pin, 1);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk2_pin, bb_clk2_a_pin, 2);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk1_pin, rf_clk1_a_pin, 4);
++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk2_pin, rf_clk2_a_pin, 5);
++
++static struct clk_smd_rpm *msm8916_clks[] = {
++ [RPM_SMD_PCNOC_CLK] = &msm8916_pcnoc_clk,
++ [RPM_SMD_PCNOC_A_CLK] = &msm8916_pcnoc_a_clk,
++ [RPM_SMD_SNOC_CLK] = &msm8916_snoc_clk,
++ [RPM_SMD_SNOC_A_CLK] = &msm8916_snoc_a_clk,
++ [RPM_SMD_BIMC_CLK] = &msm8916_bimc_clk,
++ [RPM_SMD_BIMC_A_CLK] = &msm8916_bimc_a_clk,
++ [RPM_SMD_QDSS_CLK] = &msm8916_qdss_clk,
++ [RPM_SMD_QDSS_A_CLK] = &msm8916_qdss_a_clk,
++ [RPM_SMD_BB_CLK1] = &msm8916_bb_clk1,
++ [RPM_SMD_BB_CLK1_A] = &msm8916_bb_clk1_a,
++ [RPM_SMD_BB_CLK2] = &msm8916_bb_clk2,
++ [RPM_SMD_BB_CLK2_A] = &msm8916_bb_clk2_a,
++ [RPM_SMD_RF_CLK1] = &msm8916_rf_clk1,
++ [RPM_SMD_RF_CLK1_A] = &msm8916_rf_clk1_a,
++ [RPM_SMD_RF_CLK2] = &msm8916_rf_clk2,
++ [RPM_SMD_RF_CLK2_A] = &msm8916_rf_clk2_a,
++ [RPM_SMD_BB_CLK1_PIN] = &msm8916_bb_clk1_pin,
++ [RPM_SMD_BB_CLK1_A_PIN] = &msm8916_bb_clk1_a_pin,
++ [RPM_SMD_BB_CLK2_PIN] = &msm8916_bb_clk2_pin,
++ [RPM_SMD_BB_CLK2_A_PIN] = &msm8916_bb_clk2_a_pin,
++ [RPM_SMD_RF_CLK1_PIN] = &msm8916_rf_clk1_pin,
++ [RPM_SMD_RF_CLK1_A_PIN] = &msm8916_rf_clk1_a_pin,
++ [RPM_SMD_RF_CLK2_PIN] = &msm8916_rf_clk2_pin,
++ [RPM_SMD_RF_CLK2_A_PIN] = &msm8916_rf_clk2_a_pin,
++};
++
++static const struct rpm_smd_clk_desc rpm_clk_msm8916 = {
++ .clks = msm8916_clks,
++ .num_clks = ARRAY_SIZE(msm8916_clks),
++};
++
++static const struct of_device_id rpm_smd_clk_match_table[] = {
++ { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
++ { }
++};
++MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table);
++
++static int rpm_smd_clk_probe(struct platform_device *pdev)
++{
++ struct clk_hw **hws;
++ struct rpm_cc *rcc;
++ struct clk_hw_onecell_data *data;
++ int ret;
++ size_t num_clks, i;
++ struct qcom_smd_rpm *rpm;
++ struct clk_smd_rpm **rpm_smd_clks;
++ const struct rpm_smd_clk_desc *desc;
++
++ rpm = dev_get_drvdata(pdev->dev.parent);
++ if (!rpm) {
++ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
++ return -ENODEV;
++ }
++
++ desc = of_device_get_match_data(&pdev->dev);
++ if (!desc)
++ return -EINVAL;
++
++ rpm_smd_clks = desc->clks;
++ num_clks = desc->num_clks;
++
++ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
++ GFP_KERNEL);
++ if (!rcc)
++ return -ENOMEM;
++
++ hws = rcc->hws;
++ data = &rcc->data;
++ data->num = num_clks;
++
++ for (i = 0; i < num_clks; i++) {
++ if (!rpm_smd_clks[i]) {
++ continue;
++ }
++
++ rpm_smd_clks[i]->rpm = rpm;
++
++ ret = clk_smd_rpm_handoff(rpm_smd_clks[i]);
++ if (ret)
++ goto err;
++ }
++
++ ret = clk_smd_rpm_enable_scaling(rpm);
++ if (ret)
++ goto err;
++
++ for (i = 0; i < num_clks; i++) {
++ if (!rpm_smd_clks[i]) {
++ data->hws[i] = ERR_PTR(-ENOENT);
++ continue;
++ }
++
++ ret = devm_clk_hw_register(&pdev->dev, &rpm_smd_clks[i]->hw);
++ if (ret)
++ goto err;
++ }
++
++ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
++ data);
++ if (ret)
++ goto err;
++
++ return 0;
++err:
++ dev_err(&pdev->dev, "Error registering SMD clock driver (%d)\n", ret);
++ return ret;
++}
++
++static int rpm_smd_clk_remove(struct platform_device *pdev)
++{
++ of_clk_del_provider(pdev->dev.of_node);
++ return 0;
++}
++
++static struct platform_driver rpm_smd_clk_driver = {
++ .driver = {
++ .name = "qcom-clk-smd-rpm",
++ .of_match_table = rpm_smd_clk_match_table,
++ },
++ .probe = rpm_smd_clk_probe,
++ .remove = rpm_smd_clk_remove,
++};
++
++static int __init rpm_smd_clk_init(void)
++{
++ return platform_driver_register(&rpm_smd_clk_driver);
++}
++core_initcall(rpm_smd_clk_init);
++
++static void __exit rpm_smd_clk_exit(void)
++{
++ platform_driver_unregister(&rpm_smd_clk_driver);
++}
++module_exit(rpm_smd_clk_exit);
++
++MODULE_DESCRIPTION("Qualcomm RPM over SMD Clock Controller Driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:qcom-clk-smd-rpm");
+--- /dev/null
++++ b/include/dt-bindings/clock/qcom,rpmcc.h
+@@ -0,0 +1,45 @@
++/*
++ * Copyright 2015 Linaro Limited
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
++#define _DT_BINDINGS_CLK_MSM_RPMCC_H
++
++/* msm8916 */
++#define RPM_SMD_XO_CLK_SRC 0
++#define RPM_SMD_XO_A_CLK_SRC 1
++#define RPM_SMD_PCNOC_CLK 2
++#define RPM_SMD_PCNOC_A_CLK 3
++#define RPM_SMD_SNOC_CLK 4
++#define RPM_SMD_SNOC_A_CLK 5
++#define RPM_SMD_BIMC_CLK 6
++#define RPM_SMD_BIMC_A_CLK 7
++#define RPM_SMD_QDSS_CLK 8
++#define RPM_SMD_QDSS_A_CLK 9
++#define RPM_SMD_BB_CLK1 10
++#define RPM_SMD_BB_CLK1_A 11
++#define RPM_SMD_BB_CLK2 12
++#define RPM_SMD_BB_CLK2_A 13
++#define RPM_SMD_RF_CLK1 14
++#define RPM_SMD_RF_CLK1_A 15
++#define RPM_SMD_RF_CLK2 16
++#define RPM_SMD_RF_CLK2_A 17
++#define RPM_SMD_BB_CLK1_PIN 18
++#define RPM_SMD_BB_CLK1_A_PIN 19
++#define RPM_SMD_BB_CLK2_PIN 20
++#define RPM_SMD_BB_CLK2_A_PIN 21
++#define RPM_SMD_RF_CLK1_PIN 22
++#define RPM_SMD_RF_CLK1_A_PIN 23
++#define RPM_SMD_RF_CLK2_PIN 24
++#define RPM_SMD_RF_CLK2_A_PIN 25
++
++#endif
diff --git a/target/linux/ipq806x/patches-4.4/179-clk-qcom-Add-support-for-RPM-Clocks.patch b/target/linux/ipq806x/patches-4.4/179-clk-qcom-Add-support-for-RPM-Clocks.patch
new file mode 100644
index 0000000..27e20be
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/179-clk-qcom-Add-support-for-RPM-Clocks.patch
@@ -0,0 +1,598 @@
+!This is the adjusted version of patch that has been submitted to upstream and that, unfortunately, provides support for RPM clocks only for apq8064 board.
+
+!TODO: make a patch that adds support for ipq806x along with apq8064 and not replaces it.
+
+From patchwork Wed Nov 2 15:56:57 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v9,2/3] clk: qcom: Add support for RPM Clocks
+From: Georgi Djakov <georgi.djakov@linaro.org>
+X-Patchwork-Id: 9409425
+Message-Id: <20161102155658.32203-3-georgi.djakov@linaro.org>
+To: sboyd@codeaurora.org, mturquette@baylibre.com
+Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
+ robh+dt@kernel.org, mark.rutland@arm.com,
+ linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
+ georgi.djakov@linaro.org
+Date: Wed, 2 Nov 2016 17:56:57 +0200
+
+This adds initial support for clocks controlled by the Resource
+Power Manager (RPM) processor on some Qualcomm SoCs, which use
+the qcom_rpm driver to communicate with RPM.
+Such platforms are ipq806x and msm8960.
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
+ drivers/clk/qcom/Kconfig | 13 +
+ drivers/clk/qcom/Makefile | 1 +
+ drivers/clk/qcom/clk-rpm.c | 489 +++++++++++++++++++++
+ include/dt-bindings/clock/qcom,rpmcc.h | 24 +
+ 5 files changed, 528 insertions(+)
+ create mode 100644 drivers/clk/qcom/clk-rpm.c
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
+--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+@@ -11,6 +11,7 @@ Required properties :
+ compatible "qcom,rpmcc" should be also included.
+
+ "qcom,rpmcc-msm8916", "qcom,rpmcc"
++ "qcom,rpmcc-ipq806x", "qcom,rpmcc"
+
+ - #clock-cells : shall contain 1
+
+--- a/drivers/clk/qcom/Kconfig
++++ b/drivers/clk/qcom/Kconfig
+@@ -12,6 +12,19 @@ config COMMON_CLK_QCOM
+ select REGMAP_MMIO
+ select RESET_CONTROLLER
+
++config QCOM_CLK_RPM
++ tristate "RPM based Clock Controller"
++ depends on COMMON_CLK_QCOM && MFD_QCOM_RPM
++ select QCOM_RPMCC
++ help
++ The RPM (Resource Power Manager) is a dedicated hardware engine for
++ managing the shared SoC resources in order to keep the lowest power
++ profile. It communicates with other hardware subsystems via shared
++ memory and accepts clock requests, aggregates the requests and turns
++ the clocks on/off or scales them on demand.
++ Say Y if you want to support the clocks exposed by the RPM on
++ platforms such as ipq806x, msm8660, msm8960 etc.
++
+ config QCOM_CLK_SMD_RPM
+ tristate "RPM over SMD based Clock Controller"
+ depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -29,3 +29,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
+ obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
+ obj-$(CONFIG_KRAITCC) += krait-cc.o
+ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
++obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
+--- /dev/null
++++ b/drivers/clk/qcom/clk-rpm.c
+@@ -0,0 +1,486 @@
++/*
++ * Copyright (c) 2016, Linaro Limited
++ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/err.h>
++#include <linux/export.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/mfd/qcom_rpm.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++
++#include <dt-bindings/mfd/qcom-rpm.h>
++#include <dt-bindings/clock/qcom,rpmcc.h>
++
++#define QCOM_RPM_MISC_CLK_TYPE 0x306b6c63
++#define QCOM_RPM_SCALING_ENABLE_ID 0x2
++
++#define DEFINE_CLK_RPM(_platform, _name, _active, r_id) \
++ static struct clk_rpm _platform##_##_active; \
++ static struct clk_rpm _platform##_##_name = { \
++ .rpm_clk_id = (r_id), \
++ .peer = &_platform##_##_active, \
++ .rate = INT_MAX, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_ops, \
++ .name = #_name, \
++ .parent_names = (const char *[]){ "pxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }; \
++ static struct clk_rpm _platform##_##_active = { \
++ .rpm_clk_id = (r_id), \
++ .peer = &_platform##_##_name, \
++ .active_only = true, \
++ .rate = INT_MAX, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_ops, \
++ .name = #_active, \
++ .parent_names = (const char *[]){ "pxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }
++
++#define DEFINE_CLK_RPM_PXO_BRANCH(_platform, _name, _active, r_id, r) \
++ static struct clk_rpm _platform##_##_active; \
++ static struct clk_rpm _platform##_##_name = { \
++ .rpm_clk_id = (r_id), \
++ .active_only = true, \
++ .peer = &_platform##_##_active, \
++ .rate = (r), \
++ .branch = true, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_branch_ops, \
++ .name = #_name, \
++ .parent_names = (const char *[]){ "pxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }; \
++ static struct clk_rpm _platform##_##_active = { \
++ .rpm_clk_id = (r_id), \
++ .peer = &_platform##_##_name, \
++ .rate = (r), \
++ .branch = true, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_branch_ops, \
++ .name = #_active, \
++ .parent_names = (const char *[]){ "pxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }
++
++#define DEFINE_CLK_RPM_CXO_BRANCH(_platform, _name, _active, r_id, r) \
++ static struct clk_rpm _platform##_##_active; \
++ static struct clk_rpm _platform##_##_name = { \
++ .rpm_clk_id = (r_id), \
++ .peer = &_platform##_##_active, \
++ .rate = (r), \
++ .branch = true, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_branch_ops, \
++ .name = #_name, \
++ .parent_names = (const char *[]){ "cxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }; \
++ static struct clk_rpm _platform##_##_active = { \
++ .rpm_clk_id = (r_id), \
++ .active_only = true, \
++ .peer = &_platform##_##_name, \
++ .rate = (r), \
++ .branch = true, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_rpm_branch_ops, \
++ .name = #_active, \
++ .parent_names = (const char *[]){ "cxo_board" }, \
++ .num_parents = 1, \
++ }, \
++ }
++
++#define to_clk_rpm(_hw) container_of(_hw, struct clk_rpm, hw)
++
++struct clk_rpm {
++ const int rpm_clk_id;
++ const bool active_only;
++ unsigned long rate;
++ bool enabled;
++ bool branch;
++ struct clk_rpm *peer;
++ struct clk_hw hw;
++ struct qcom_rpm *rpm;
++};
++
++struct rpm_cc {
++ struct qcom_rpm *rpm;
++ struct clk_hw_onecell_data data;
++ struct clk_hw *hws[];
++};
++
++struct rpm_clk_desc {
++ struct clk_rpm **clks;
++ size_t num_clks;
++};
++
++static DEFINE_MUTEX(rpm_clk_lock);
++
++static int clk_rpm_handoff(struct clk_rpm *r)
++{
++ int ret;
++ u32 value = INT_MAX;
++
++ ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE,
++ r->rpm_clk_id, &value, 1);
++ if (ret)
++ return ret;
++ ret = qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE,
++ r->rpm_clk_id, &value, 1);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static int clk_rpm_set_rate_active(struct clk_rpm *r, unsigned long rate)
++{
++ u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */
++
++ return qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE,
++ r->rpm_clk_id, &value, 1);
++}
++
++static int clk_rpm_set_rate_sleep(struct clk_rpm *r, unsigned long rate)
++{
++ u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */
++
++ return qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE,
++ r->rpm_clk_id, &value, 1);
++}
++
++static void to_active_sleep(struct clk_rpm *r, unsigned long rate,
++ unsigned long *active, unsigned long *sleep)
++{
++ *active = rate;
++
++ /*
++ * Active-only clocks don't care what the rate is during sleep. So,
++ * they vote for zero.
++ */
++ if (r->active_only)
++ *sleep = 0;
++ else
++ *sleep = *active;
++}
++
++static int clk_rpm_prepare(struct clk_hw *hw)
++{
++ struct clk_rpm *r = to_clk_rpm(hw);
++ struct clk_rpm *peer = r->peer;
++ unsigned long this_rate = 0, this_sleep_rate = 0;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ unsigned long active_rate, sleep_rate;
++ int ret = 0;
++
++ mutex_lock(&rpm_clk_lock);
++
++ /* Don't send requests to the RPM if the rate has not been set. */
++ if (!r->rate)
++ goto out;
++
++ to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate,
++ &peer_rate, &peer_sleep_rate);
++
++ active_rate = max(this_rate, peer_rate);
++
++ if (r->branch)
++ active_rate = !!active_rate;
++
++ ret = clk_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++ if (r->branch)
++ sleep_rate = !!sleep_rate;
++
++ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ /* Undo the active set vote and restore it */
++ ret = clk_rpm_set_rate_active(r, peer_rate);
++
++out:
++ if (!ret)
++ r->enabled = true;
++
++ mutex_unlock(&rpm_clk_lock);
++
++ return ret;
++}
++
++static void clk_rpm_unprepare(struct clk_hw *hw)
++{
++ struct clk_rpm *r = to_clk_rpm(hw);
++ struct clk_rpm *peer = r->peer;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ unsigned long active_rate, sleep_rate;
++ int ret;
++
++ mutex_lock(&rpm_clk_lock);
++
++ if (!r->rate)
++ goto out;
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate, &peer_rate,
++ &peer_sleep_rate);
++
++ active_rate = r->branch ? !!peer_rate : peer_rate;
++ ret = clk_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
++ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ goto out;
++
++ r->enabled = false;
++
++out:
++ mutex_unlock(&rpm_clk_lock);
++}
++
++static int clk_rpm_set_rate(struct clk_hw *hw,
++ unsigned long rate, unsigned long parent_rate)
++{
++ struct clk_rpm *r = to_clk_rpm(hw);
++ struct clk_rpm *peer = r->peer;
++ unsigned long active_rate, sleep_rate;
++ unsigned long this_rate = 0, this_sleep_rate = 0;
++ unsigned long peer_rate = 0, peer_sleep_rate = 0;
++ int ret = 0;
++
++ mutex_lock(&rpm_clk_lock);
++
++ if (!r->enabled)
++ goto out;
++
++ to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
++
++ /* Take peer clock's rate into account only if it's enabled. */
++ if (peer->enabled)
++ to_active_sleep(peer, peer->rate,
++ &peer_rate, &peer_sleep_rate);
++
++ active_rate = max(this_rate, peer_rate);
++ ret = clk_rpm_set_rate_active(r, active_rate);
++ if (ret)
++ goto out;
++
++ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
++ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
++ if (ret)
++ goto out;
++
++ r->rate = rate;
++
++out:
++ mutex_unlock(&rpm_clk_lock);
++
++ return ret;
++}
++
++static long clk_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long *parent_rate)
++{
++ /*
++ * RPM handles rate rounding and we don't have a way to
++ * know what the rate will be, so just return whatever
++ * rate is requested.
++ */
++ return rate;
++}
++
++static unsigned long clk_rpm_recalc_rate(struct clk_hw *hw,
++ unsigned long parent_rate)
++{
++ struct clk_rpm *r = to_clk_rpm(hw);
++
++ /*
++ * RPM handles rate rounding and we don't have a way to
++ * know what the rate will be, so just return whatever
++ * rate was set.
++ */
++ return r->rate;
++}
++
++static const struct clk_ops clk_rpm_ops = {
++ .prepare = clk_rpm_prepare,
++ .unprepare = clk_rpm_unprepare,
++ .set_rate = clk_rpm_set_rate,
++ .round_rate = clk_rpm_round_rate,
++ .recalc_rate = clk_rpm_recalc_rate,
++};
++
++static const struct clk_ops clk_rpm_branch_ops = {
++ .prepare = clk_rpm_prepare,
++ .unprepare = clk_rpm_unprepare,
++ .round_rate = clk_rpm_round_rate,
++ .recalc_rate = clk_rpm_recalc_rate,
++};
++
++/* ipq806x */
++DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
++DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
++DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
++DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
++DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
++
++static struct clk_rpm *ipq806x_clks[] = {
++ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
++ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
++ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
++ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
++ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
++ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
++ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
++ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
++ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
++ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
++ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
++ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
++ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
++ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
++ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
++ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
++};
++
++static const struct rpm_clk_desc rpm_clk_ipq806x = {
++ .clks = ipq806x_clks,
++ .num_clks = ARRAY_SIZE(ipq806x_clks),
++};
++
++static const struct of_device_id rpm_clk_match_table[] = {
++ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
++ { }
++};
++MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
++
++static int rpm_clk_probe(struct platform_device *pdev)
++{
++ struct clk_hw **hws;
++ struct rpm_cc *rcc;
++ struct clk_hw_onecell_data *data;
++ int ret;
++ size_t num_clks, i;
++ struct qcom_rpm *rpm;
++ struct clk_rpm **rpm_clks;
++ const struct rpm_clk_desc *desc;
++
++ rpm = dev_get_drvdata(pdev->dev.parent);
++ if (!rpm) {
++ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
++ return -ENODEV;
++ }
++
++ desc = of_device_get_match_data(&pdev->dev);
++ if (!desc)
++ return -EINVAL;
++
++ rpm_clks = desc->clks;
++ num_clks = desc->num_clks;
++
++ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
++ GFP_KERNEL);
++ if (!rcc)
++ return -ENOMEM;
++
++ hws = rcc->hws;
++ data = &rcc->data;
++ data->num = num_clks;
++
++ for (i = 0; i < num_clks; i++) {
++ if (!rpm_clks[i])
++ continue;
++
++ rpm_clks[i]->rpm = rpm;
++
++ ret = clk_rpm_handoff(rpm_clks[i]);
++ if (ret)
++ goto err;
++ }
++
++ for (i = 0; i < num_clks; i++) {
++ if (!rpm_clks[i]) {
++ data->hws[i] = ERR_PTR(-ENOENT);
++ continue;
++ }
++
++ ret = devm_clk_hw_register(&pdev->dev, &rpm_clks[i]->hw);
++ if (ret)
++ goto err;
++ }
++
++ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
++ data);
++ if (ret)
++ goto err;
++
++ return 0;
++err:
++ dev_err(&pdev->dev, "Error registering RPM Clock driver (%d)\n", ret);
++ return ret;
++}
++
++static int rpm_clk_remove(struct platform_device *pdev)
++{
++ of_clk_del_provider(pdev->dev.of_node);
++ return 0;
++}
++
++static struct platform_driver rpm_clk_driver = {
++ .driver = {
++ .name = "qcom-clk-rpm",
++ .of_match_table = rpm_clk_match_table,
++ },
++ .probe = rpm_clk_probe,
++ .remove = rpm_clk_remove,
++};
++
++static int __init rpm_clk_init(void)
++{
++ return platform_driver_register(&rpm_clk_driver);
++}
++core_initcall(rpm_clk_init);
++
++static void __exit rpm_clk_exit(void)
++{
++ platform_driver_unregister(&rpm_clk_driver);
++}
++module_exit(rpm_clk_exit);
++
++MODULE_DESCRIPTION("Qualcomm RPM Clock Controller Driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:qcom-clk-rpm");
+--- a/include/dt-bindings/clock/qcom,rpmcc.h
++++ b/include/dt-bindings/clock/qcom,rpmcc.h
+@@ -14,6 +14,28 @@
+ #ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
+ #define _DT_BINDINGS_CLK_MSM_RPMCC_H
+
++/* ipq806x */
++#define RPM_PXO_CLK 0
++#define RPM_PXO_A_CLK 1
++#define RPM_CXO_CLK 2
++#define RPM_CXO_A_CLK 3
++#define RPM_APPS_FABRIC_CLK 4
++#define RPM_APPS_FABRIC_A_CLK 5
++#define RPM_CFPB_CLK 6
++#define RPM_CFPB_A_CLK 7
++#define RPM_DAYTONA_FABRIC_CLK 8
++#define RPM_DAYTONA_FABRIC_A_CLK 9
++#define RPM_EBI1_CLK 10
++#define RPM_EBI1_A_CLK 11
++#define RPM_NSS_FABRIC_0_CLK 12
++#define RPM_NSS_FABRIC_0_A_CLK 13
++#define RPM_NSS_FABRIC_1_CLK 14
++#define RPM_NSS_FABRIC_1_A_CLK 15
++#define RPM_SYS_FABRIC_CLK 16
++#define RPM_SYS_FABRIC_A_CLK 17
++#define RPM_SFPB_CLK 18
++#define RPM_SFPB_A_CLK 19
++
+ /* msm8916 */
+ #define RPM_SMD_XO_CLK_SRC 0
+ #define RPM_SMD_XO_A_CLK_SRC 1
diff --git a/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch b/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch
new file mode 100644
index 0000000..c8d83e9
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch
@@ -0,0 +1,53 @@
+From patchwork Wed Nov 2 15:56:58 2016
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v9,3/3] clk: qcom: Always add factor clock for xo clocks
+From: Georgi Djakov <georgi.djakov@linaro.org>
+X-Patchwork-Id: 9409421
+Message-Id: <20161102155658.32203-4-georgi.djakov@linaro.org>
+To: sboyd@codeaurora.org, mturquette@baylibre.com
+Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
+ robh+dt@kernel.org, mark.rutland@arm.com,
+ linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
+ georgi.djakov@linaro.org
+Date: Wed, 2 Nov 2016 17:56:58 +0200
+
+Currently the RPM/RPM-SMD clock drivers do not register the xo clocks,
+so we should always add factor clock. When we later add xo clocks support
+into the drivers, we should update this function to skip registration.
+By doing so we avoid any DT dependencies.
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ drivers/clk/qcom/common.c | 15 ++++++---------
+ 1 file changed, 6 insertions(+), 9 deletions(-)
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+
+--- a/drivers/clk/qcom/common.c
++++ b/drivers/clk/qcom/common.c
+@@ -154,15 +154,12 @@ int qcom_cc_register_board_clk(struct de
+ const char *name, unsigned long rate)
+ {
+ bool add_factor = true;
+- struct device_node *node;
+
+- /* The RPM clock driver will add the factor clock if present */
+- if (IS_ENABLED(CONFIG_QCOM_RPMCC)) {
+- node = of_find_compatible_node(NULL, NULL, "qcom,rpmcc");
+- if (of_device_is_available(node))
+- add_factor = false;
+- of_node_put(node);
+- }
++ /*
++ * TODO: The RPM clock driver currently does not support the xo clock.
++ * When xo is added to the RPM clock driver, we should change this
++ * function to skip registration of xo factor clocks.
++ */
+
+ return _qcom_cc_register_board_clk(dev, path, name, rate, add_factor);
+ }
diff --git a/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch b/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch
new file mode 100644
index 0000000..d8bbcf0
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch
@@ -0,0 +1,45 @@
+From 6da1b6260843da455cad8180c18d020679fd4a46 Mon Sep 17 00:00:00 2001
+From: Pavel Kubelun <be.dissent@gmail.com>
+Date: Sun, 6 Nov 2016 19:07:24 +0300
+Subject: [PATCH] ipq806x: add board clocks and rpmcc into DT
+
+Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+index 8c989c0..6b06118 100644
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -92,6 +92,18 @@
+ };
+
+ clocks {
++ cxo_board {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <25000000>;
++ };
++
++ pxo_board {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <25000000>;
++ };
++
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+@@ -175,6 +187,11 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
++ rpmcc: clock-controller {
++ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
++ #clock-cells = <1>;
++ };
++
+ regulators {
+ compatible = "qcom,rpm-smb208-regulators";
+