kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernels

SVN-Revision: 21081

13 files changed, 42 insertions, 74 deletions

diff --git a/target/linux/ixp4xx/patches-2.6.33/020-gateworks_i2c_pld.patch b/target/linux/ixp4xx/patches-2.6.33/020-gateworks_i2c_pld.patch
index a09a3be..b51e26d 100644
--- a/target/linux/ixp4xx/patches-2.6.33/020-gateworks_i2c_pld.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/020-gateworks_i2c_pld.patch
@@ -374,9 +374,9 @@
 +MODULE_AUTHOR("Chris Lang");
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
-@@ -196,6 +196,14 @@ config GPIO_LANGWELL
- 	help
- 	  Say Y here to support Intel Moorestown platform GPIO.
+@@ -221,6 +221,14 @@ config GPIO_TIMBERDALE
+ 	---help---
+ 	Add support for the GPIO IP in the timberdale FPGA.
  
 +config GPIO_GW_I2C_PLD
 +	tristate "Gateworks I2C PLD GPIO Expander"
@@ -391,7 +391,7 @@
  config GPIO_MAX7301
 --- a/drivers/gpio/Makefile
 +++ b/drivers/gpio/Makefile
-@@ -19,3 +19,4 @@ obj-$(CONFIG_GPIO_XILINX)	+= xilinx_gpio
+@@ -22,3 +22,4 @@ obj-$(CONFIG_GPIO_CS5535)	+= cs5535-gpio
  obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
  obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
  obj-$(CONFIG_GPIO_WM831X)	+= wm831x-gpio.o
diff --git a/target/linux/ixp4xx/patches-2.6.33/050-disable_dmabounce.patch b/target/linux/ixp4xx/patches-2.6.33/050-disable_dmabounce.patch
index 34de296..64b3da0 100644
--- a/target/linux/ixp4xx/patches-2.6.33/050-disable_dmabounce.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/050-disable_dmabounce.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -418,7 +418,6 @@ config ARCH_IXP4XX
+@@ -417,7 +417,6 @@ config ARCH_IXP4XX
  	select GENERIC_GPIO
  	select GENERIC_TIME
  	select GENERIC_CLOCKEVENTS
@@ -109,7 +109,7 @@
  
  void __init ixp4xx_pci_preinit(void)
  {
-@@ -517,19 +529,35 @@ struct pci_bus * __devinit ixp4xx_scan_b
+@@ -513,19 +525,35 @@ struct pci_bus * __devinit ixp4xx_scan_b
  int
  pci_set_dma_mask(struct pci_dev *dev, u64 mask)
  {
diff --git a/target/linux/ixp4xx/patches-2.6.33/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.33/120-compex_support.patch
index ccac8cc..3a26afe 100644
--- a/target/linux/ixp4xx/patches-2.6.33/120-compex_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/120-compex_support.patch
@@ -189,7 +189,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
 +MACHINE_END
 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
 +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -66,7 +66,8 @@ struct hw_pci ixdp425_pci __initdata = {
+@@ -70,7 +70,8 @@ struct hw_pci ixdp425_pci __initdata = {
  int __init ixdp425_pci_init(void)
  {
  	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
diff --git a/target/linux/ixp4xx/patches-2.6.33/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-2.6.33/150-lanready_ap1000_support.patch
index 378786e..1dd31e7 100644
--- a/target/linux/ixp4xx/patches-2.6.33/150-lanready_ap1000_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/150-lanready_ap1000_support.patch
@@ -154,7 +154,7 @@
 +#endif
 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
 +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -67,7 +67,7 @@ int __init ixdp425_pci_init(void)
+@@ -71,7 +71,7 @@ int __init ixdp425_pci_init(void)
  {
  	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
  			machine_is_ixdp465() || machine_is_kixrp435() ||
diff --git a/target/linux/ixp4xx/patches-2.6.33/170-ixdpg425_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.33/170-ixdpg425_mac_plat_info.patch
index 772b697..279f4c6 100644
--- a/target/linux/ixp4xx/patches-2.6.33/170-ixdpg425_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/170-ixdpg425_mac_plat_info.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-ixp4xx/coyote-setup.c
 +++ b/arch/arm/mach-ixp4xx/coyote-setup.c
-@@ -73,9 +73,37 @@ static struct platform_device coyote_uar
+@@ -82,9 +82,37 @@ static struct platform_device coyote_uar
  	.resource	= &coyote_uart_resource,
  };
  
diff --git a/target/linux/ixp4xx/patches-2.6.33/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-2.6.33/191-cambria_optional_uart.patch
index 41058e2..2ebe3e4 100644
--- a/target/linux/ixp4xx/patches-2.6.33/191-cambria_optional_uart.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/191-cambria_optional_uart.patch
@@ -106,7 +106,7 @@
  	unsigned int	type;		/* If UPF_FIXED_TYPE */
 --- a/include/linux/serial_core.h
 +++ b/include/linux/serial_core.h
-@@ -285,6 +285,7 @@ struct uart_port {
+@@ -288,6 +288,7 @@ struct uart_port {
  #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
  #define UPIO_DWAPB		(6)			/* DesignWare APB UART */
  #define UPIO_RM9000		(7)			/* RM9000 type IO */
@@ -114,7 +114,7 @@
  
  	unsigned int		read_status_mask;	/* driver specific */
  	unsigned int		ignore_status_mask;	/* driver specific */
-@@ -327,6 +328,7 @@ struct uart_port {
+@@ -330,6 +331,7 @@ struct uart_port {
  
  	unsigned int		mctrl;			/* current modem ctrl settings */
  	unsigned int		timeout;		/* character-based timeout */
@@ -124,7 +124,7 @@
  	unsigned int		custom_divisor;
 --- a/drivers/serial/8250.c
 +++ b/drivers/serial/8250.c
-@@ -409,6 +409,20 @@
+@@ -409,6 +409,20 @@ static void mem_serial_out(struct uart_p
  	writeb(value, p->membase + offset);
  }
  
@@ -145,7 +145,7 @@
  static void mem32_serial_out(struct uart_port *p, int offset, int value)
  {
  	offset = map_8250_out_reg(p, offset) << p->regshift;
-@@ -502,6 +516,11 @@
+@@ -502,6 +516,11 @@ static void set_io_from_upio(struct uart
  		p->serial_out = mem32_serial_out;
  		break;
  
@@ -157,7 +157,7 @@
  #ifdef CONFIG_SERIAL_8250_AU1X00
  	case UPIO_AU:
  		p->serial_in = au_serial_in;
-@@ -534,6 +553,7 @@
+@@ -534,6 +553,7 @@ serial_out_sync(struct uart_8250_port *u
  	switch (p->iotype) {
  	case UPIO_MEM:
  	case UPIO_MEM32:
@@ -165,7 +165,7 @@
  #ifdef CONFIG_SERIAL_8250_AU1X00
  	case UPIO_AU:
  #endif
-@@ -2450,6 +2470,7 @@
+@@ -2450,6 +2470,7 @@ static int serial8250_request_std_resour
  	case UPIO_MEM32:
  	case UPIO_MEM:
  	case UPIO_DWAPB:
@@ -173,7 +173,7 @@
  		if (!up->port.mapbase)
  			break;
  
-@@ -2487,6 +2508,7 @@
+@@ -2487,6 +2508,7 @@ static void serial8250_release_std_resou
  	case UPIO_MEM32:
  	case UPIO_MEM:
  	case UPIO_DWAPB:
@@ -181,7 +181,7 @@
  		if (!up->port.mapbase)
  			break;
  
-@@ -2964,6 +2986,7 @@
+@@ -2964,6 +2986,7 @@ static int __devinit serial8250_probe(st
  		port.serial_in		= p->serial_in;
  		port.serial_out		= p->serial_out;
  		port.dev		= &dev->dev;
@@ -189,7 +189,7 @@
  		port.irqflags		|= irqflag;
  		ret = serial8250_register_port(&port);
  		if (ret < 0) {
-@@ -3113,6 +3136,7 @@
+@@ -3113,6 +3136,7 @@ int serial8250_register_port(struct uart
  		uart->port.iotype       = port->iotype;
  		uart->port.flags        = port->flags | UPF_BOOT_AUTOCONF;
  		uart->port.mapbase      = port->mapbase;
@@ -199,7 +199,7 @@
  			uart->port.dev = port->dev;
 --- a/drivers/serial/serial_core.c
 +++ b/drivers/serial/serial_core.c
-@@ -2161,6 +2161,7 @@ uart_report_port(struct uart_driver *drv
+@@ -2144,6 +2144,7 @@ uart_report_port(struct uart_driver *drv
  		snprintf(address, sizeof(address),
  			 "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
  		break;
@@ -207,7 +207,7 @@
  	case UPIO_MEM:
  	case UPIO_MEM32:
  	case UPIO_AU:
-@@ -2573,6 +2574,7 @@ int uart_match_port(struct uart_port *po
+@@ -2557,6 +2558,7 @@ int uart_match_port(struct uart_port *po
  	case UPIO_HUB6:
  		return (port1->iobase == port2->iobase) &&
  		       (port1->hub6   == port2->hub6);
diff --git a/target/linux/ixp4xx/patches-2.6.33/300-avila_fetch_mac.patch b/target/linux/ixp4xx/patches-2.6.33/300-avila_fetch_mac.patch
index d3ccb04..329fd95 100644
--- a/target/linux/ixp4xx/patches-2.6.33/300-avila_fetch_mac.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/300-avila_fetch_mac.patch
@@ -15,11 +15,11 @@
 +#include <linux/i2c/at24.h>
 +
  #include <linux/i2c-gpio.h>
- 
  #include <asm/types.h>
-@@ -29,6 +35,13 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
+ #include <asm/setup.h>
+@@ -31,6 +37,13 @@
+ #define AVILA_SDA_PIN	7
+ #define AVILA_SCL_PIN	6
  
 +struct avila_board_info {
 +	unsigned char	*model;
@@ -31,7 +31,7 @@
  static struct flash_platform_data avila_flash_data = {
  	.map_name	= "cfi_probe",
  	.width		= 2,
-@@ -132,16 +145,181 @@ static struct platform_device avila_pata
+@@ -134,16 +147,181 @@ static struct platform_device avila_pata
  	.resource		= avila_pata_resources,
  };
  
@@ -213,7 +213,7 @@
  	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
  	avila_flash_resource.end =
  		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-@@ -159,7 +337,28 @@ static void __init avila_init(void)
+@@ -161,7 +339,28 @@ static void __init avila_init(void)
  
  	platform_device_register(&avila_pata);
  
diff --git a/target/linux/ixp4xx/patches-2.6.33/301-avila_led.patch b/target/linux/ixp4xx/patches-2.6.33/301-avila_led.patch
index b5ecef6..cc5fade 100644
--- a/target/linux/ixp4xx/patches-2.6.33/301-avila_led.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/301-avila_led.patch
@@ -6,9 +6,9 @@
  
 +#include <linux/leds.h>
  #include <linux/i2c-gpio.h>
- 
  #include <asm/types.h>
-@@ -170,6 +171,72 @@ static struct platform_device avila_npec
+ #include <asm/setup.h>
+@@ -172,6 +173,72 @@ static struct platform_device avila_npec
  	.dev.platform_data	= &avila_npec_data,
  };
  
@@ -81,7 +81,7 @@
  static struct platform_device *avila_devices[] __initdata = {
  	&avila_i2c_gpio,
  	&avila_flash,
-@@ -180,12 +247,16 @@ static void __init avila_gw23xx_setup(vo
+@@ -182,12 +249,16 @@ static void __init avila_gw23xx_setup(vo
  {
  	platform_device_register(&avila_npeb_device);
  	platform_device_register(&avila_npec_device);
@@ -98,7 +98,7 @@
  }
  
  static void __init avila_gw2345_setup(void)
-@@ -196,22 +267,30 @@ static void __init avila_gw2345_setup(vo
+@@ -198,22 +269,30 @@ static void __init avila_gw2345_setup(vo
  
  	avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
  	platform_device_register(&avila_npec_device);
@@ -129,7 +129,7 @@
  }
  
  static void __init avila_gw2355_setup(void)
-@@ -222,11 +301,29 @@ static void __init avila_gw2355_setup(vo
+@@ -224,11 +303,29 @@ static void __init avila_gw2355_setup(vo
  
  	avila_npec_data.phy = 16;
  	platform_device_register(&avila_npec_device);
diff --git a/target/linux/ixp4xx/patches-2.6.33/302-avila_gpio_device.patch b/target/linux/ixp4xx/patches-2.6.33/302-avila_gpio_device.patch
index 7e3daaa..f941a94 100644
--- a/target/linux/ixp4xx/patches-2.6.33/302-avila_gpio_device.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/302-avila_gpio_device.patch
@@ -1,37 +1,5 @@
 --- a/arch/arm/mach-ixp4xx/avila-setup.c
 +++ b/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -237,10 +237,28 @@ static struct platform_device avila_latc
- 	.dev.platform_data	= &avila_latch_leds_data,
- };
- 
-+static struct resource avila_gpio_resources[] = {
-+	{
-+		.name	= "gpio",
-+		/* FIXME: gpio mask should be model specific */
-+		.start	= AVILA_GPIO_MASK,
-+		.end	= AVILA_GPIO_MASK,
-+		.flags	= 0,
-+	},
-+};
-+
-+static struct platform_device avila_gpio = {
-+	.name			= "GPIODEV",
-+	.id			= -1,
-+	.num_resources		= ARRAY_SIZE(avila_gpio_resources),
-+	.resource		= avila_gpio_resources,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- 	&avila_i2c_gpio,
- 	&avila_flash,
--	&avila_uart
-+	&avila_uart,
-+	&avila_gpio,
- };
- 
- static void __init avila_gw23xx_setup(void)
---- a/arch/arm/mach-ixp4xx/avila-setup.c
-+++ b/arch/arm/mach-ixp4xx/avila-setup.c
 @@ -38,6 +38,13 @@
  #define AVILA_SDA_PIN	7
  #define AVILA_SCL_PIN	6
diff --git a/target/linux/ixp4xx/patches-2.6.33/310-gtwx5717_spi_bus.patch b/target/linux/ixp4xx/patches-2.6.33/310-gtwx5717_spi_bus.patch
index d778c88..164e03e 100644
--- a/target/linux/ixp4xx/patches-2.6.33/310-gtwx5717_spi_bus.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/310-gtwx5717_spi_bus.patch
@@ -8,7 +8,7 @@
  #include <asm/types.h>
  #include <asm/setup.h>
  #include <asm/memory.h>
-@@ -147,9 +148,41 @@
+@@ -147,9 +148,41 @@ static struct platform_device gtwx5715_f
  	.resource	= &gtwx5715_flash_resource,
  };
  
diff --git a/target/linux/ixp4xx/patches-2.6.33/311-gtwx5717_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.33/311-gtwx5717_mac_plat_info.patch
index 29f3290..8ce79e4 100644
--- a/target/linux/ixp4xx/patches-2.6.33/311-gtwx5717_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/311-gtwx5717_mac_plat_info.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
 +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -154,10 +154,37 @@ static struct platform_device gtwx5715_s
+@@ -179,10 +179,37 @@ static struct platform_device gtwx5715_s
  	},
  };
  
diff --git a/target/linux/ixp4xx/patches-2.6.33/402-ixp4xx_gpiolib.patch b/target/linux/ixp4xx/patches-2.6.33/402-ixp4xx_gpiolib.patch
index b3f1336..0d5a253 100644
--- a/target/linux/ixp4xx/patches-2.6.33/402-ixp4xx_gpiolib.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/402-ixp4xx_gpiolib.patch
@@ -50,7 +50,7 @@
  
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -418,6 +418,7 @@ config ARCH_IXP4XX
+@@ -417,6 +417,7 @@ config ARCH_IXP4XX
  	select GENERIC_GPIO
  	select GENERIC_TIME
  	select GENERIC_CLOCKEVENTS
@@ -122,4 +122,4 @@
 +#define gpio_cansleep __gpio_cansleep
  
  extern int gpio_to_irq(int gpio);
- extern int irq_to_gpio(int gpio);
+ extern int irq_to_gpio(unsigned int irq);
diff --git a/target/linux/ixp4xx/patches-2.6.33/520-tw2662_support.patch b/target/linux/ixp4xx/patches-2.6.33/520-tw2662_support.patch
index b26016c..cc796c5 100644
--- a/target/linux/ixp4xx/patches-2.6.33/520-tw2662_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.33/520-tw2662_support.patch
@@ -1,6 +1,6 @@
---- a/arch/arm/mach-ixp4xx/Kconfig	
+--- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -180,6 +180,15 @@
+@@ -180,6 +180,15 @@ config ARCH_PRPMC1100
  	  PrPCM1100 Processor Mezanine Module. For more information on
  	  this platform, see <file:Documentation/arm/IXP4xx>.
  
@@ -18,7 +18,7 @@
  	select PCI
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -23,6 +23,7 @@
+@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sid
  obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
  obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
  obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
@@ -26,7 +26,7 @@
  obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
  obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
  obj-pci-$(CONFIG_MACH_USR8200)		+= usr8200-pci.o
-@@ -48,6 +49,7 @@
+@@ -48,6 +49,7 @@ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewin
  obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
  obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
  obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
@@ -36,7 +36,7 @@
  obj-$(CONFIG_MACH_USR8200)	+= usr8200-setup.o
 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
 +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -43,7 +43,7 @@
+@@ -43,7 +43,7 @@ static __inline__ void __arch_decomp_set
  	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
  			 machine_is_gateway7001() || machine_is_wg302v2() ||
  			 machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
@@ -45,7 +45,7 @@
  		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
  	else
  		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- a/arch/arm/mach-ixp4xx/tw2662-pci.c
+--- /dev/null
 +++ b/arch/arm/mach-ixp4xx/tw2662-pci.c
 @@ -0,0 +1,68 @@
 +/*
@@ -116,7 +116,7 @@
 +}
 +
 +subsys_initcall(tw2662_pci_init);
---- a/arch/arm/mach-ixp4xx/tw2662-setup.c
+--- /dev/null
 +++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
 @@ -0,0 +1,208 @@
 +/*