kirkwood: prepare for 3.10

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38279

5 files changed, 0 insertions, 952 deletions

diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexhome-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexhome-setup.c
deleted file mode 100644
index 84daeef..0000000
--- a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexhome-setup.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/goflexhome-setup.c
- *
- * Seagate GoFlex Home Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition goflexhome_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_2M + SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data goflexhome_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data goflexhome_sata_data = {
-	.n_ports	= 1,
-};
-
-static struct gpio_led goflexhome_led_pins[] = {
-	{
-		.name			= "status:green:health",
-		.default_trigger	= "default-on",
-		.gpio			= 46,
-		.active_low		= 1,
-	},
-	{
-		.name			= "status:orange:fault",
-		.default_trigger	= "none",
-		.gpio			= 47,
-		.active_low		= 1,
-	},
-	{
-		.name			= "status:white:misc",
-		.default_trigger	= "none",
-		.gpio			= 40,
-		.active_low		= 0,
-	}
-};
-
-static struct gpio_led_platform_data goflexhome_led_data = {
-	.leds		= goflexhome_led_pins,
-	.num_leds	= ARRAY_SIZE(goflexhome_led_pins),
-};
-
-static struct platform_device goflexhome_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &goflexhome_led_data,
-	}
-};
-
-static unsigned int goflexhome_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP47_GPIO,	/* LED Orange */
-	MPP46_GPIO,	/* LED Green */
-	MPP40_GPIO,	/* LED White */
-	0
-};
-
-static void __init goflexhome_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-
-	/* setup gpio pin select */
-	kirkwood_mpp_conf(goflexhome_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(goflexhome_nand_parts), 40);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&goflexhome_ge00_data);
-	kirkwood_sata_init(&goflexhome_sata_data);
-
-	platform_device_register(&goflexhome_leds);
-}
-
-MACHINE_START(GOFLEXHOME, "Seagate GoFlex Home")
-	/* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= goflexhome_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexnet-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexnet-setup.c
deleted file mode 100644
index cd9dc9e..0000000
--- a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexnet-setup.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/goflexnet-setup.c
- *
- * Seagate GoFlex Net Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition goflexnet_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "rootfs",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_32M
-	}, {
-		.name = "data",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data goflexnet_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct gpio_led goflexnet_led_pins[] = {
-	{
-		.name			= "status:green:health",
-		.default_trigger	= "default-on",
-		.gpio			= 46, // 0x4000
-		.active_low		= 1,
-	},
-	{
-		.name			= "status:orange:fault",
-		.default_trigger	= "none",
-		.gpio			= 47, // 0x8000
-		.active_low		= 1,
-	},
-	{
-		.name			= "status:white:left0",
-		.default_trigger	= "none",
-		.gpio			= 42, // 0x0400
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:left1",
-		.default_trigger	= "none",
-		.gpio			= 43, // 0x0800
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:left2",
-		.default_trigger	= "none",
-		.gpio			= 44, // 0x1000
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:left3",
-		.default_trigger	= "none",
-		.gpio			= 45, // 0x2000
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:right0",
-		.default_trigger	= "none",
-		.gpio			= 38, // 0x0040
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:right1",
-		.default_trigger	= "none",
-		.gpio			= 39, // 0x0080
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:right2",
-		.default_trigger	= "none",
-		.gpio			= 40, // 0x0100
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:right3",
-		.default_trigger	= "none",
-		.gpio			= 41, // 0x0200
-		.active_low		= 0,
-	}
-};
-
-static struct gpio_led_platform_data goflexnet_led_data = {
-	.leds		= goflexnet_led_pins,
-	.num_leds	= ARRAY_SIZE(goflexnet_led_pins),
-};
-
-static struct platform_device goflexnet_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &goflexnet_led_data,
-	}
-};
-
-static unsigned int goflexnet_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP47_GPIO,	/* LED Orange */
-	MPP46_GPIO,	/* LED Green */
-	MPP45_GPIO,	/* LED Left Capacity 3 */
-	MPP44_GPIO,	/* LED Left Capacity 2 */
-	MPP43_GPIO,	/* LED Left Capacity 1 */
-	MPP42_GPIO,	/* LED Left Capacity 0 */
-	MPP41_GPIO,	/* LED Right Capacity 3 */
-	MPP40_GPIO,	/* LED Right Capacity 2 */
-	MPP39_GPIO,	/* LED Right Capacity 1 */
-	MPP38_GPIO,	/* LED Right Capacity 0 */
-	0
-};
-
-static void __init goflexnet_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-
-	/* setup gpio pin select */
-	kirkwood_mpp_conf(goflexnet_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(goflexnet_nand_parts), 40);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&goflexnet_ge00_data);
-	kirkwood_sata_init(&goflexnet_sata_data);
-
-	platform_device_register(&goflexnet_leds);
-}
-
-MACHINE_START(GOFLEXNET, "Seagate GoFlex Net")
-	/* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= goflexnet_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c
deleted file mode 100644
index 4e8d192..0000000
--- a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/iconnect-setup.c
- *
- * Iomega iConnect Wireless
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition iconnect_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_1M + SZ_2M
-	}, {
-		.name = "rootfs",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_32M,
-	}, {
-		.name = "data",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct gpio_led iconnect_led_pins[] = {
-	{
-		.name			= "iconnect:blue:power",
-		.default_trigger	= "default-on",
-		.gpio			= 42,
-	},
-	{
-		.name			= "iconnect:red:power",
-		.gpio			= 43,
-	},
-	{
-		.name			= "iconnect:blue:usb1",
-		.gpio			= 44,
-	},
-	{
-		.name			= "iconnect:blue:usb2",
-		.gpio			= 45,
-	},
-	{
-		.name			= "iconnect:blue:usb3",
-		.gpio			= 46,
-	},
-	{
-		.name			= "iconnect:blue:usb4",
-		.gpio			= 47,
-	},
-	{
-		.name			= "iconnect:blue:otb",
-		.gpio			= 48,
-	},
-};
-
-static struct gpio_led_platform_data iconnect_led_data = {
-	.leds		= iconnect_led_pins,
-	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
-};
-
-static struct platform_device iconnect_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &iconnect_led_data,
-	}
-};
-
-#define ICONNECT_GPIO_KEY_RESET		12
-#define ICONNECT_GPIO_KEY_OTB		35
-
-#define ICONNECT_SW_RESET		0x00
-#define ICONNECT_SW_OTB			0x01
-
-static struct gpio_keys_button iconnect_buttons[] = {
-	{
-		.type		= EV_SW,
-		.code		= ICONNECT_SW_RESET,
-		.gpio		= ICONNECT_GPIO_KEY_RESET,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	},
-	{
-		.type		= EV_SW,
-		.code		= ICONNECT_SW_OTB,
-		.gpio		= ICONNECT_GPIO_KEY_OTB,
-		.desc		= "OTB Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	},
-};
-
-static struct gpio_keys_platform_data iconnect_button_data = {
-	.buttons	= iconnect_buttons,
-	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
-};
-
-static struct platform_device iconnect_button_device = {
-	.name	   	= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev = {
-		.platform_data = &iconnect_button_data,
-	},
-};
-
-static unsigned int iconnect_mpp_config[] __initdata = {
-	MPP12_GPIO, /*Input for reset button*/
-	MPP35_GPIO, /*Input for OTB button*/
-	MPP42_GPIO,
-	MPP43_GPIO,
-	MPP44_GPIO,
-	MPP45_GPIO,
-	MPP46_GPIO,
-	MPP47_GPIO,
-	MPP48_GPIO,
-	0
-};
-
-static void __init iconnect_init(void)
-{
-	u32 dev, rev;
-
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(iconnect_mpp_config);
-
-	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&iconnect_ge00_data);
-	kirkwood_pcie_id(&dev, &rev);
-
-	kirkwood_uart0_init();
-	kirkwood_i2c_init();
-
-	platform_device_register(&iconnect_leds);
-	platform_device_register(&iconnect_button_device);
-}
-
-static int __init iconnect_pci_init(void)
-{
-	if (machine_is_iconnect())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(iconnect_pci_init);
-
-
-MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
-	.atag_offset	= 0x100,
-	.init_machine	= iconnect_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c
deleted file mode 100644
index 00c8531..0000000
--- a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/nas6210-setup.c
- *
- * Raidsonic ICYBOX NAS6210 Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-#define NAS6210_GPIO_POWER_OFF	24
-
-static struct mtd_partition nas6210_nand_parts[] = {
-	{
-		.name = "uboot",
-		.offset = 0,
-		.size = SZ_512K
-	}, {
-		.name = "uboot_env",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_128K
-	}, {
-		.name = "kernel",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = 3 * SZ_1M
-	}, {
-		.name = "rootfs",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data nas6210_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data nas6210_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct gpio_led nas6210_led_pins[] = {
-	{
-		.name			= "status:green:power",
-		.default_trigger	= "default-on",
-		.gpio			= 25,
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:red:power",
-		.default_trigger	= "none",
-		.gpio			= 22,
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:red:usb_copy",
-		.default_trigger	= "none",
-		.gpio			= 27,
-		.active_low		= 0,
-	},
-};
-
-static struct gpio_led_platform_data nas6210_led_data = {
-	.leds		= nas6210_led_pins,
-	.num_leds	= ARRAY_SIZE(nas6210_led_pins),
-};
-
-static struct platform_device nas6210_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &nas6210_led_data,
-	}
-};
-
-static struct gpio_keys_button nas6210_buttons[] = {
-	{
-		.code		= KEY_COPY,
-		.gpio		= 29,
-		.desc		= "USB Copy",
-		.active_low	= 1,
-	},
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 28,
-		.desc		= "Reset",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data nas6210_button_data = {
-	.buttons	= nas6210_buttons,
-	.nbuttons	= ARRAY_SIZE(nas6210_buttons),
-};
-
-static struct platform_device nas6210_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &nas6210_button_data,
-	}
-};
-
-static unsigned int nas6210_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_NF_IO3,
-	MPP2_NF_IO4,
-	MPP3_NF_IO5,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
- 	MPP22_GPIO,	/* Power LED red */
-	MPP24_GPIO,	/* Power off device */
-	MPP25_GPIO,	/* Power LED green */
-	MPP27_GPIO,	/* USB transfer LED */
-	MPP28_GPIO,	/* Reset button */
-	MPP29_GPIO,	/* USB Copy button */
-	0
-};
-
-static void nas6210_power_off(void)
-{
-	gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
-}
-
-static void __init nas6210_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(nas6210_mpp_config);
-
-	kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&nas6210_ge00_data);
-	kirkwood_sata_init(&nas6210_sata_data);
-	kirkwood_uart0_init();
-	platform_device_register(&nas6210_leds);
-	platform_device_register(&nas6210_button_device);
-	if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
-	    gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = nas6210_power_off;
-	else
-		pr_err("nas6210: failed to configure power-off GPIO\n");
-}
-
-static int __init nas6210_pci_init(void)
-{
-	if (machine_is_nas6210()) {
-		u32 dev, rev;
-
-		kirkwood_pcie_id(&dev, &rev);
-		if (dev == MV88F6282_DEV_ID)
-			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
-		else
-			kirkwood_pcie_init(KW_PCIE0);
-	}
-
-	return 0;
-}
-subsys_initcall(nas6210_pci_init);
-
-MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
-	/* Maintainer: <gmbnomis at gmail dot com> */
-	.atag_offset	= 0x100,
-	.init_machine	= nas6210_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nsa-310-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nsa-310-setup.c
deleted file mode 100644
index 15dc526..0000000
--- a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nsa-310-setup.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/nsa-310-setup.c
- *
- * ZyXEL NSA-310 Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-#define NSA310_GPIO_LED_ESATA_GREEN	12
-#define NSA310_GPIO_LED_ESATA_RED	13
-#define NSA310_GPIO_LED_USB_GREEN	15
-#define NSA310_GPIO_LED_USB_RED		16
-#define NSA310_GPIO_USB_POWER_OFF	21
-#define NSA310_GPIO_LED_SYS_GREEN	28
-#define NSA310_GPIO_LED_SYS_RED		29
-#define NSA310_GPIO_KEY_RESTART		36
-#define NSA310_GPIO_KEY_COPY		37
-#define NSA310_GPIO_LED_COPY_GREEN	39
-#define NSA310_GPIO_LED_COPY_RED	40
-#define NSA310_GPIO_LED_HDD_GREEN	41
-#define NSA310_GPIO_LED_HDD_RED		42
-#define NSA310_GPIO_BUZZER		44
-#define NSA310_GPIO_KEY_POWER		46
-#define NSA310_GPIO_POWER_OFF		48
-
-
-static unsigned int nsa310_mpp_config[] __initdata = {
-	MPP12_GPIO,
-	MPP13_GPIO,
-	MPP15_GPIO,
-	MPP16_GPIO,
-	MPP21_GPIO,
-	MPP28_GPIO,
-	MPP29_GPIO,
-	MPP36_GPIO,
-	MPP37_GPIO,
-	MPP39_GPIO,
-	MPP40_GPIO,
-	MPP41_GPIO,
-	MPP42_GPIO,
-	MPP44_GPIO,
-	MPP46_GPIO,
-	MPP48_GPIO,
-	0
-};
-
-static struct mtd_partition nsa310_mtd_parts[] = {
-	{
-		.name	= "uboot",
-		.offset	= 0,
-		.size	= 0x100000,
-		.mask_flags = MTD_WRITEABLE,
-	}, {
-		.name	= "uboot_env",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0x80000,
-	}, {
-		.name	= "key_store",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0x80000,
-	}, {
-		.name	= "info",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0x80000,
-	}, {
-		.name	= "etc",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0xa00000,
-	}, {
-		.name	= "kernel_1",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0xa00000,
-	}, {
-		.name	= "rootfs1",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0x2fc0000,
-	}, {
-		.name	= "kernel_2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0xa00000,
-	}, {
-		.name	= "rootfs2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0x2fc0000,
-	},
-};
-
-static struct gpio_led nsa310_leds[] = {
-	{
-		.name	= "nsa310:green:sys",
-		.gpio	= NSA310_GPIO_LED_SYS_GREEN,
-	}, {
-		.name	= "nsa310:red:sys",
-		.gpio	= NSA310_GPIO_LED_SYS_RED,
-	}, {
-		.name	= "nsa310:green:hdd",
-		.gpio	= NSA310_GPIO_LED_HDD_GREEN,
-	}, {
-		.name	= "nsa310:red:hdd",
-		.gpio	= NSA310_GPIO_LED_HDD_RED,
-	}, {
-		.name	= "nsa310:green:esata",
-		.gpio	= NSA310_GPIO_LED_ESATA_GREEN,
-	}, {
-		.name	= "nsa310:red:esata",
-		.gpio	= NSA310_GPIO_LED_ESATA_RED,
-	}, {
-		.name	= "nsa310:green:usb",
-		.gpio	= NSA310_GPIO_LED_USB_GREEN,
-	}, {
-		.name	= "nsa310:red:usb",
-		.gpio	= NSA310_GPIO_LED_USB_RED,
-	}, {
-		.name	= "nsa310:green:copy",
-		.gpio	= NSA310_GPIO_LED_COPY_GREEN,
-	}, {
-		.name	= "nsa310:red:copy",
-		.gpio	= NSA310_GPIO_LED_COPY_RED,
-	},
-};
-
-static struct gpio_led_platform_data nsa310_leds_data = {
-	.leds		= nsa310_leds,
-	.num_leds	= ARRAY_SIZE(nsa310_leds),
-};
-
-static struct platform_device nsa310_leds_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &nsa310_leds_data,
-	}
-};
-
-static struct gpio_keys_button nsa310_buttons[] = {
-	{
-		.desc		= "Power Button",
-		.code		= KEY_POWER,
-		.type		= EV_KEY,
-		.gpio		= NSA310_GPIO_KEY_POWER,
-		.debounce_interval = 1000,
-	}, {
-		.desc		= "Copy Button",
-		.code		= KEY_COPY,
-		.type		= EV_KEY,
-		.gpio		= NSA310_GPIO_KEY_COPY,
-		.active_low	= 1,
-		.debounce_interval = 1000,
-	}, {
-		.desc		= "Reset Button",
-		.code		= KEY_RESTART,
-		.type		= EV_KEY,
-		.gpio		= NSA310_GPIO_KEY_RESTART,
-		.active_low	= 1,
-		.debounce_interval = 1000,
-	},
-};
-
-static struct gpio_keys_platform_data nsa310_keys_data = {
-	.buttons	= nsa310_buttons,
-	.nbuttons	= ARRAY_SIZE(nsa310_buttons),
-};
-
-static struct platform_device nsa310_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev = {
-		.platform_data  = &nsa310_keys_data,
-	}
-};
-
-static struct i2c_board_info __initdata nsa310_i2c_info[] = {
-        { I2C_BOARD_INFO("adt7476", 0x2e) },
-};
-
-static struct mv_sata_platform_data nsa310_sata_data = {
-	.n_ports	= 2,
-};
-
-static void nsa310_power_off(void)
-{
-	gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
-}
-
-static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
-				       const char *label)
-{
-	int err;
-
-	err = gpio_request_one(gpio, flags, label);
-	if (err)
-		pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
-			gpio, label, err);
-
-	return err;
-}
-
-static void __init nsa310_gpio_init(void)
-{
-	int err;
-
-	err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
-				  "Power Off");
-	if (!err)
-		pm_power_off = nsa310_power_off;
-
-	nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
-			    "USB Power Off");
-}
-
-static void __init nsa310_init(void)
-{
-	u32 dev, rev;
-
-	kirkwood_init();
-	kirkwood_mpp_conf(nsa310_mpp_config);
-
-	nsa310_gpio_init();
-
-	kirkwood_nand_init(ARRAY_AND_SIZE(nsa310_mtd_parts), 35);
-	kirkwood_ehci_init();
-
-	kirkwood_pcie_id(&dev, &rev);
-
-	kirkwood_sata_init(&nsa310_sata_data);
-	kirkwood_uart0_init();
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
-	kirkwood_i2c_init();
-
-	platform_device_register(&nsa310_leds_device);
-	platform_device_register(&nsa310_keys_device);
-}
-
-static int __init nsa310_pci_init(void)
-{
-	if (machine_is_nsa310())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(nsa310_pci_init);
-
-MACHINE_START(NSA310, "ZyXEL NSA-310")
-	.atag_offset	= 0x100,
-	.init_machine	= nsa310_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END