kirkwood: drop 3.18

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49021

1 files changed, 0 insertions, 192 deletions

diff --git a/target/linux/kirkwood/patches-3.18/170-ea3500.patch b/target/linux/kirkwood/patches-3.18/170-ea3500.patch
deleted file mode 100644
index 6a03c41..0000000
--- a/target/linux/kirkwood/patches-3.18/170-ea3500.patch
+++ /dev/null
@@ -1,192 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -128,6 +128,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- 	kirkwood-is2.dtb \
- 	kirkwood-km_kirkwood.dtb \
- 	kirkwood-laplug.dtb \
-+	kirkwood-linksys-audi.dtb \
- 	kirkwood-linksys-viper.dtb \
- 	kirkwood-lschlv2.dtb \
- 	kirkwood-lsxhl.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,179 @@
-+/*
-+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ * (c) 2014 Dan Walters <dan@walters.io>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+	model = "Linksys EA3500";
-+	compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x4000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+	};
-+
-+	mbus {
-+		pcie-controller {
-+			status = "okay";
-+
-+			pcie@1,0 {
-+				status = "okay";
-+			};
-+
-+			pcie@2,0 {
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pmx_led_green_power: pmx-led-green-power {
-+				marvell,pins = "mpp7";
-+				marvell,function = "gpo";
-+			};
-+			pmx_btn_wps: pmx-btn-wps {
-+				marvell,pins = "mpp47";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_reset: pmx-btn-reset {
-+				marvell,pins = "mpp48";
-+				marvell,function = "gpio";
-+			};
-+		};
-+
-+		rtc@10300 {
-+			status = "disabled";
-+		};
-+
-+		serial@12000 {
-+			status = "okay";
-+		};
-+
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+		pinctrl-names = "default";
-+
-+		button@15 {
-+			label = "WPS Button";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		button@16 {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = < &pmx_led_green_power >;
-+		pinctrl-names = "default";
-+
-+		green-power {
-+			label = "audi:green:power";
-+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	mvsw61xx {
-+		compatible = "marvell,88e6171";
-+		status = "okay";
-+		reg = <0x10>;
-+
-+		mii-bus = <&mdio>;
-+		cpu-port-0 = <5>;
-+		cpu-port-1 = <6>;
-+		is-indirect;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	pinctrl-0 = <&pmx_nand>;
-+	pinctrl-names = "default";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0 0x80000>;
-+	};
-+
-+	partition@80000 {
-+		label = "u_env";
-+		reg = <0x80000 0x4000>;
-+	};
-+
-+	partition@84000 {
-+		label = "s_env";
-+		reg = <0x84000 0x4000>;
-+	};
-+
-+	partition@200000 {
-+		label = "kernel1";
-+		reg = <0x200000 0x1400000>;
-+	};
-+
-+	partition@490000 {
-+		label = "rootfs1";
-+		reg = <0x490000 0x1170000>;
-+	};
-+
-+	partition@1600000 {
-+		label = "kernel2";
-+		reg = <0x1600000 0x1400000>;
-+	};
-+
-+	partition@1890000 {
-+		label = "rootfs2";
-+		reg = <0x1890000 0x1170000>;
-+	};
-+
-+	partition@2a00000 {
-+		label = "syscfg";
-+		reg = <0x2a00000  0x1600000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
-+
-+&eth1 {
-+	status = "okay";
-+	ethernet1-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};