kirkwood: drop 3.3.x kernel version

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38404

9 files changed, 0 insertions, 1238 deletions

diff --git a/target/linux/kirkwood/config-3.3 b/target/linux/kirkwood/config-3.3
deleted file mode 100644
index d9899f3..0000000
--- a/target/linux/kirkwood/config-3.3
+++ /dev/null
@@ -1,177 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_ARCH_KIRKWOOD=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
-CONFIG_ARM=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-# CONFIG_ARPD is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CMDLINE="rootdelay=1 root=/dev/mmcblk0p1 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FEROCEON=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC16=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DLCI is not set
-CONFIG_DNOTIFY=y
-CONFIG_EXT4_FS=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SCHED_CLOCK=y
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_HW_RANDOM=y
-CONFIG_INET_LRO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_JBD2=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_MACH_D2NET_V2 is not set
-# CONFIG_MACH_DB88F6281_BP is not set
-CONFIG_MACH_DOCKSTAR=y
-CONFIG_MACH_ESATA_SHEEVAPLUG=y 
-CONFIG_MACH_GOFLEXHOME=y
-CONFIG_MACH_GOFLEXNET=y
-# CONFIG_MACH_GURUPLUG is not set
-CONFIG_MACH_ICONNECT=y
-# CONFIG_MACH_INETSPACE_V2 is not set
-# CONFIG_MACH_MV88F6281GTW_GE is not set
-CONFIG_MACH_NAS6210=y
-# CONFIG_MACH_NET2BIG_V2 is not set
-# CONFIG_MACH_NET5BIG_V2 is not set
-# CONFIG_MACH_NETSPACE_MAX_V2 is not set
-# CONFIG_MACH_NETSPACE_V2 is not set
-CONFIG_MACH_NSA310=y
-CONFIG_MACH_OPENRD=y
-CONFIG_MACH_OPENRD_BASE=y
-CONFIG_MACH_OPENRD_CLIENT=y
-# CONFIG_MACH_OPENRD_ULTIMATE is not set
-# CONFIG_MACH_RD88F6192_NAS is not set
-# CONFIG_MACH_RD88F6281 is not set
-CONFIG_MACH_SHEEVAPLUG=y
-# CONFIG_MACH_T5325 is not set
-# CONFIG_MACH_TS219 is not set
-# CONFIG_MACH_TS41X is not set
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
-# CONFIG_MTD_ROOTFS_SPLIT is not set
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
-CONFIG_NET_DSA_TAG_DSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NLS=y
-CONFIG_OUTER_CACHE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PLAT_ORION=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RTC_CLASS=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_UID16=y
-CONFIG_USB=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WAN=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/goflexhome-setup.c b/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/goflexhome-setup.c
deleted file mode 100644
index 84daeef..0000000
--- a/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/goflexhome-setup.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/goflexhome-setup.c
- *
- * Seagate GoFlex Home Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition goflexhome_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_2M + SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data goflexhome_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data goflexhome_sata_data = {
-	.n_ports	= 1,
-};
-
-static struct gpio_led goflexhome_led_pins[] = {
-	{
-		.name			= "status:green:health",
-		.default_trigger	= "default-on",
-		.gpio			= 46,
-		.active_low		= 1,
-	},
-	{
-		.name			= "status:orange:fault",
-		.default_trigger	= "none",
-		.gpio			= 47,
-		.active_low		= 1,
-	},
-	{
-		.name			= "status:white:misc",
-		.default_trigger	= "none",
-		.gpio			= 40,
-		.active_low		= 0,
-	}
-};
-
-static struct gpio_led_platform_data goflexhome_led_data = {
-	.leds		= goflexhome_led_pins,
-	.num_leds	= ARRAY_SIZE(goflexhome_led_pins),
-};
-
-static struct platform_device goflexhome_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &goflexhome_led_data,
-	}
-};
-
-static unsigned int goflexhome_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP47_GPIO,	/* LED Orange */
-	MPP46_GPIO,	/* LED Green */
-	MPP40_GPIO,	/* LED White */
-	0
-};
-
-static void __init goflexhome_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-
-	/* setup gpio pin select */
-	kirkwood_mpp_conf(goflexhome_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(goflexhome_nand_parts), 40);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&goflexhome_ge00_data);
-	kirkwood_sata_init(&goflexhome_sata_data);
-
-	platform_device_register(&goflexhome_leds);
-}
-
-MACHINE_START(GOFLEXHOME, "Seagate GoFlex Home")
-	/* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= goflexhome_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/goflexnet-setup.c b/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/goflexnet-setup.c
deleted file mode 100644
index cd9dc9e..0000000
--- a/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/goflexnet-setup.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/goflexnet-setup.c
- *
- * Seagate GoFlex Net Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition goflexnet_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "rootfs",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_32M
-	}, {
-		.name = "data",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data goflexnet_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct gpio_led goflexnet_led_pins[] = {
-	{
-		.name			= "status:green:health",
-		.default_trigger	= "default-on",
-		.gpio			= 46, // 0x4000
-		.active_low		= 1,
-	},
-	{
-		.name			= "status:orange:fault",
-		.default_trigger	= "none",
-		.gpio			= 47, // 0x8000
-		.active_low		= 1,
-	},
-	{
-		.name			= "status:white:left0",
-		.default_trigger	= "none",
-		.gpio			= 42, // 0x0400
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:left1",
-		.default_trigger	= "none",
-		.gpio			= 43, // 0x0800
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:left2",
-		.default_trigger	= "none",
-		.gpio			= 44, // 0x1000
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:left3",
-		.default_trigger	= "none",
-		.gpio			= 45, // 0x2000
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:right0",
-		.default_trigger	= "none",
-		.gpio			= 38, // 0x0040
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:right1",
-		.default_trigger	= "none",
-		.gpio			= 39, // 0x0080
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:right2",
-		.default_trigger	= "none",
-		.gpio			= 40, // 0x0100
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:white:right3",
-		.default_trigger	= "none",
-		.gpio			= 41, // 0x0200
-		.active_low		= 0,
-	}
-};
-
-static struct gpio_led_platform_data goflexnet_led_data = {
-	.leds		= goflexnet_led_pins,
-	.num_leds	= ARRAY_SIZE(goflexnet_led_pins),
-};
-
-static struct platform_device goflexnet_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &goflexnet_led_data,
-	}
-};
-
-static unsigned int goflexnet_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP47_GPIO,	/* LED Orange */
-	MPP46_GPIO,	/* LED Green */
-	MPP45_GPIO,	/* LED Left Capacity 3 */
-	MPP44_GPIO,	/* LED Left Capacity 2 */
-	MPP43_GPIO,	/* LED Left Capacity 1 */
-	MPP42_GPIO,	/* LED Left Capacity 0 */
-	MPP41_GPIO,	/* LED Right Capacity 3 */
-	MPP40_GPIO,	/* LED Right Capacity 2 */
-	MPP39_GPIO,	/* LED Right Capacity 1 */
-	MPP38_GPIO,	/* LED Right Capacity 0 */
-	0
-};
-
-static void __init goflexnet_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-
-	/* setup gpio pin select */
-	kirkwood_mpp_conf(goflexnet_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(goflexnet_nand_parts), 40);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&goflexnet_ge00_data);
-	kirkwood_sata_init(&goflexnet_sata_data);
-
-	platform_device_register(&goflexnet_leds);
-}
-
-MACHINE_START(GOFLEXNET, "Seagate GoFlex Net")
-	/* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= goflexnet_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/iconnect-setup.c b/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/iconnect-setup.c
deleted file mode 100644
index 4e8d192..0000000
--- a/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/iconnect-setup.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/iconnect-setup.c
- *
- * Iomega iConnect Wireless
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition iconnect_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_1M + SZ_2M
-	}, {
-		.name = "rootfs",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_32M,
-	}, {
-		.name = "data",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct gpio_led iconnect_led_pins[] = {
-	{
-		.name			= "iconnect:blue:power",
-		.default_trigger	= "default-on",
-		.gpio			= 42,
-	},
-	{
-		.name			= "iconnect:red:power",
-		.gpio			= 43,
-	},
-	{
-		.name			= "iconnect:blue:usb1",
-		.gpio			= 44,
-	},
-	{
-		.name			= "iconnect:blue:usb2",
-		.gpio			= 45,
-	},
-	{
-		.name			= "iconnect:blue:usb3",
-		.gpio			= 46,
-	},
-	{
-		.name			= "iconnect:blue:usb4",
-		.gpio			= 47,
-	},
-	{
-		.name			= "iconnect:blue:otb",
-		.gpio			= 48,
-	},
-};
-
-static struct gpio_led_platform_data iconnect_led_data = {
-	.leds		= iconnect_led_pins,
-	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
-};
-
-static struct platform_device iconnect_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &iconnect_led_data,
-	}
-};
-
-#define ICONNECT_GPIO_KEY_RESET		12
-#define ICONNECT_GPIO_KEY_OTB		35
-
-#define ICONNECT_SW_RESET		0x00
-#define ICONNECT_SW_OTB			0x01
-
-static struct gpio_keys_button iconnect_buttons[] = {
-	{
-		.type		= EV_SW,
-		.code		= ICONNECT_SW_RESET,
-		.gpio		= ICONNECT_GPIO_KEY_RESET,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	},
-	{
-		.type		= EV_SW,
-		.code		= ICONNECT_SW_OTB,
-		.gpio		= ICONNECT_GPIO_KEY_OTB,
-		.desc		= "OTB Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	},
-};
-
-static struct gpio_keys_platform_data iconnect_button_data = {
-	.buttons	= iconnect_buttons,
-	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
-};
-
-static struct platform_device iconnect_button_device = {
-	.name	   	= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev = {
-		.platform_data = &iconnect_button_data,
-	},
-};
-
-static unsigned int iconnect_mpp_config[] __initdata = {
-	MPP12_GPIO, /*Input for reset button*/
-	MPP35_GPIO, /*Input for OTB button*/
-	MPP42_GPIO,
-	MPP43_GPIO,
-	MPP44_GPIO,
-	MPP45_GPIO,
-	MPP46_GPIO,
-	MPP47_GPIO,
-	MPP48_GPIO,
-	0
-};
-
-static void __init iconnect_init(void)
-{
-	u32 dev, rev;
-
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(iconnect_mpp_config);
-
-	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&iconnect_ge00_data);
-	kirkwood_pcie_id(&dev, &rev);
-
-	kirkwood_uart0_init();
-	kirkwood_i2c_init();
-
-	platform_device_register(&iconnect_leds);
-	platform_device_register(&iconnect_button_device);
-}
-
-static int __init iconnect_pci_init(void)
-{
-	if (machine_is_iconnect())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(iconnect_pci_init);
-
-
-MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
-	.atag_offset	= 0x100,
-	.init_machine	= iconnect_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/nas6210-setup.c b/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/nas6210-setup.c
deleted file mode 100644
index 00c8531..0000000
--- a/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/nas6210-setup.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/nas6210-setup.c
- *
- * Raidsonic ICYBOX NAS6210 Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-#define NAS6210_GPIO_POWER_OFF	24
-
-static struct mtd_partition nas6210_nand_parts[] = {
-	{
-		.name = "uboot",
-		.offset = 0,
-		.size = SZ_512K
-	}, {
-		.name = "uboot_env",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_128K
-	}, {
-		.name = "kernel",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = 3 * SZ_1M
-	}, {
-		.name = "rootfs",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data nas6210_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data nas6210_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct gpio_led nas6210_led_pins[] = {
-	{
-		.name			= "status:green:power",
-		.default_trigger	= "default-on",
-		.gpio			= 25,
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:red:power",
-		.default_trigger	= "none",
-		.gpio			= 22,
-		.active_low		= 0,
-	},
-	{
-		.name			= "status:red:usb_copy",
-		.default_trigger	= "none",
-		.gpio			= 27,
-		.active_low		= 0,
-	},
-};
-
-static struct gpio_led_platform_data nas6210_led_data = {
-	.leds		= nas6210_led_pins,
-	.num_leds	= ARRAY_SIZE(nas6210_led_pins),
-};
-
-static struct platform_device nas6210_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &nas6210_led_data,
-	}
-};
-
-static struct gpio_keys_button nas6210_buttons[] = {
-	{
-		.code		= KEY_COPY,
-		.gpio		= 29,
-		.desc		= "USB Copy",
-		.active_low	= 1,
-	},
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 28,
-		.desc		= "Reset",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data nas6210_button_data = {
-	.buttons	= nas6210_buttons,
-	.nbuttons	= ARRAY_SIZE(nas6210_buttons),
-};
-
-static struct platform_device nas6210_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &nas6210_button_data,
-	}
-};
-
-static unsigned int nas6210_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_NF_IO3,
-	MPP2_NF_IO4,
-	MPP3_NF_IO5,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
- 	MPP22_GPIO,	/* Power LED red */
-	MPP24_GPIO,	/* Power off device */
-	MPP25_GPIO,	/* Power LED green */
-	MPP27_GPIO,	/* USB transfer LED */
-	MPP28_GPIO,	/* Reset button */
-	MPP29_GPIO,	/* USB Copy button */
-	0
-};
-
-static void nas6210_power_off(void)
-{
-	gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
-}
-
-static void __init nas6210_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(nas6210_mpp_config);
-
-	kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&nas6210_ge00_data);
-	kirkwood_sata_init(&nas6210_sata_data);
-	kirkwood_uart0_init();
-	platform_device_register(&nas6210_leds);
-	platform_device_register(&nas6210_button_device);
-	if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
-	    gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = nas6210_power_off;
-	else
-		pr_err("nas6210: failed to configure power-off GPIO\n");
-}
-
-static int __init nas6210_pci_init(void)
-{
-	if (machine_is_nas6210()) {
-		u32 dev, rev;
-
-		kirkwood_pcie_id(&dev, &rev);
-		if (dev == MV88F6282_DEV_ID)
-			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
-		else
-			kirkwood_pcie_init(KW_PCIE0);
-	}
-
-	return 0;
-}
-subsys_initcall(nas6210_pci_init);
-
-MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
-	/* Maintainer: <gmbnomis at gmail dot com> */
-	.atag_offset	= 0x100,
-	.init_machine	= nas6210_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/nsa-310-setup.c b/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/nsa-310-setup.c
deleted file mode 100644
index 15dc526..0000000
--- a/target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/nsa-310-setup.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/nsa-310-setup.c
- *
- * ZyXEL NSA-310 Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-#define NSA310_GPIO_LED_ESATA_GREEN	12
-#define NSA310_GPIO_LED_ESATA_RED	13
-#define NSA310_GPIO_LED_USB_GREEN	15
-#define NSA310_GPIO_LED_USB_RED		16
-#define NSA310_GPIO_USB_POWER_OFF	21
-#define NSA310_GPIO_LED_SYS_GREEN	28
-#define NSA310_GPIO_LED_SYS_RED		29
-#define NSA310_GPIO_KEY_RESTART		36
-#define NSA310_GPIO_KEY_COPY		37
-#define NSA310_GPIO_LED_COPY_GREEN	39
-#define NSA310_GPIO_LED_COPY_RED	40
-#define NSA310_GPIO_LED_HDD_GREEN	41
-#define NSA310_GPIO_LED_HDD_RED		42
-#define NSA310_GPIO_BUZZER		44
-#define NSA310_GPIO_KEY_POWER		46
-#define NSA310_GPIO_POWER_OFF		48
-
-
-static unsigned int nsa310_mpp_config[] __initdata = {
-	MPP12_GPIO,
-	MPP13_GPIO,
-	MPP15_GPIO,
-	MPP16_GPIO,
-	MPP21_GPIO,
-	MPP28_GPIO,
-	MPP29_GPIO,
-	MPP36_GPIO,
-	MPP37_GPIO,
-	MPP39_GPIO,
-	MPP40_GPIO,
-	MPP41_GPIO,
-	MPP42_GPIO,
-	MPP44_GPIO,
-	MPP46_GPIO,
-	MPP48_GPIO,
-	0
-};
-
-static struct mtd_partition nsa310_mtd_parts[] = {
-	{
-		.name	= "uboot",
-		.offset	= 0,
-		.size	= 0x100000,
-		.mask_flags = MTD_WRITEABLE,
-	}, {
-		.name	= "uboot_env",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0x80000,
-	}, {
-		.name	= "key_store",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0x80000,
-	}, {
-		.name	= "info",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0x80000,
-	}, {
-		.name	= "etc",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0xa00000,
-	}, {
-		.name	= "kernel_1",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0xa00000,
-	}, {
-		.name	= "rootfs1",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0x2fc0000,
-	}, {
-		.name	= "kernel_2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0xa00000,
-	}, {
-		.name	= "rootfs2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 0x2fc0000,
-	},
-};
-
-static struct gpio_led nsa310_leds[] = {
-	{
-		.name	= "nsa310:green:sys",
-		.gpio	= NSA310_GPIO_LED_SYS_GREEN,
-	}, {
-		.name	= "nsa310:red:sys",
-		.gpio	= NSA310_GPIO_LED_SYS_RED,
-	}, {
-		.name	= "nsa310:green:hdd",
-		.gpio	= NSA310_GPIO_LED_HDD_GREEN,
-	}, {
-		.name	= "nsa310:red:hdd",
-		.gpio	= NSA310_GPIO_LED_HDD_RED,
-	}, {
-		.name	= "nsa310:green:esata",
-		.gpio	= NSA310_GPIO_LED_ESATA_GREEN,
-	}, {
-		.name	= "nsa310:red:esata",
-		.gpio	= NSA310_GPIO_LED_ESATA_RED,
-	}, {
-		.name	= "nsa310:green:usb",
-		.gpio	= NSA310_GPIO_LED_USB_GREEN,
-	}, {
-		.name	= "nsa310:red:usb",
-		.gpio	= NSA310_GPIO_LED_USB_RED,
-	}, {
-		.name	= "nsa310:green:copy",
-		.gpio	= NSA310_GPIO_LED_COPY_GREEN,
-	}, {
-		.name	= "nsa310:red:copy",
-		.gpio	= NSA310_GPIO_LED_COPY_RED,
-	},
-};
-
-static struct gpio_led_platform_data nsa310_leds_data = {
-	.leds		= nsa310_leds,
-	.num_leds	= ARRAY_SIZE(nsa310_leds),
-};
-
-static struct platform_device nsa310_leds_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &nsa310_leds_data,
-	}
-};
-
-static struct gpio_keys_button nsa310_buttons[] = {
-	{
-		.desc		= "Power Button",
-		.code		= KEY_POWER,
-		.type		= EV_KEY,
-		.gpio		= NSA310_GPIO_KEY_POWER,
-		.debounce_interval = 1000,
-	}, {
-		.desc		= "Copy Button",
-		.code		= KEY_COPY,
-		.type		= EV_KEY,
-		.gpio		= NSA310_GPIO_KEY_COPY,
-		.active_low	= 1,
-		.debounce_interval = 1000,
-	}, {
-		.desc		= "Reset Button",
-		.code		= KEY_RESTART,
-		.type		= EV_KEY,
-		.gpio		= NSA310_GPIO_KEY_RESTART,
-		.active_low	= 1,
-		.debounce_interval = 1000,
-	},
-};
-
-static struct gpio_keys_platform_data nsa310_keys_data = {
-	.buttons	= nsa310_buttons,
-	.nbuttons	= ARRAY_SIZE(nsa310_buttons),
-};
-
-static struct platform_device nsa310_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev = {
-		.platform_data  = &nsa310_keys_data,
-	}
-};
-
-static struct i2c_board_info __initdata nsa310_i2c_info[] = {
-        { I2C_BOARD_INFO("adt7476", 0x2e) },
-};
-
-static struct mv_sata_platform_data nsa310_sata_data = {
-	.n_ports	= 2,
-};
-
-static void nsa310_power_off(void)
-{
-	gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
-}
-
-static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
-				       const char *label)
-{
-	int err;
-
-	err = gpio_request_one(gpio, flags, label);
-	if (err)
-		pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
-			gpio, label, err);
-
-	return err;
-}
-
-static void __init nsa310_gpio_init(void)
-{
-	int err;
-
-	err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
-				  "Power Off");
-	if (!err)
-		pm_power_off = nsa310_power_off;
-
-	nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
-			    "USB Power Off");
-}
-
-static void __init nsa310_init(void)
-{
-	u32 dev, rev;
-
-	kirkwood_init();
-	kirkwood_mpp_conf(nsa310_mpp_config);
-
-	nsa310_gpio_init();
-
-	kirkwood_nand_init(ARRAY_AND_SIZE(nsa310_mtd_parts), 35);
-	kirkwood_ehci_init();
-
-	kirkwood_pcie_id(&dev, &rev);
-
-	kirkwood_sata_init(&nsa310_sata_data);
-	kirkwood_uart0_init();
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
-	kirkwood_i2c_init();
-
-	platform_device_register(&nsa310_leds_device);
-	platform_device_register(&nsa310_keys_device);
-}
-
-static int __init nsa310_pci_init(void)
-{
-	if (machine_is_nsa310())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(nsa310_pci_init);
-
-MACHINE_START(NSA310, "ZyXEL NSA-310")
-	.atag_offset	= 0x100,
-	.init_machine	= nsa310_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/target/linux/kirkwood/patches-3.3/000-boards.patch b/target/linux/kirkwood/patches-3.3/000-boards.patch
deleted file mode 100644
index 22bd2b6..0000000
--- a/target/linux/kirkwood/patches-3.3/000-boards.patch
+++ /dev/null
@@ -1,66 +0,0 @@
---- a/arch/arm/mach-kirkwood/Makefile
-+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -8,6 +8,8 @@ obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheeva
- obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
- obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
- obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
-+obj-$(CONFIG_MACH_GOFLEXNET)		+= goflexnet-setup.o
-+obj-$(CONFIG_MACH_GOFLEXHOME)		+= goflexhome-setup.o
- obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
- obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
- obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
-@@ -18,5 +20,8 @@ obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2
- obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
- obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
- obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
-+obj-$(CONFIG_MACH_ICONNECT)		+= iconnect-setup.o
-+obj-$(CONFIG_MACH_NAS6210)		+= nas6210-setup.o
-+obj-$(CONFIG_MACH_NSA310)              += nsa-310-setup.o
- 
- obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
---- a/arch/arm/mach-kirkwood/Kconfig
-+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -64,6 +64,18 @@ config MACH_DOCKSTAR
- 	  Say 'Y' here if you want your kernel to support the
- 	  Seagate FreeAgent DockStar.
- 
-+config MACH_GOFLEXNET
-+        bool "Seagate GoFlex Net"
-+        help
-+          Say 'Y' here if you want your kernel to support the
-+          Seagate GoFlex Net.
-+
-+config MACH_GOFLEXHOME
-+        bool "Seagate GoFlex Home"
-+        help
-+          Say 'Y' here if you want your kernel to support the
-+          Seagate GoFlex Home.
-+
- config MACH_OPENRD
-         bool
- 
-@@ -130,6 +142,24 @@ config MACH_T5325
- 	  Say 'Y' here if you want your kernel to support the
- 	  HP t5325 Thin Client.
- 
-+config MACH_ICONNECT
-+	bool "Iomega iConnect Wireless"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Iomega iConnect Wireless.
-+
-+config MACH_NAS6210
-+	bool "RaidSonic ICY BOX IB-NAS6210"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  RaidSonic ICY BOX IB-NAS6210 device.
-+
-+config MACH_NSA310
-+	bool "ZyXEL NSA-310"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  ZyXEL NSA-310 board.
-+
- endmenu
- 
- endif
diff --git a/target/linux/kirkwood/patches-3.3/001-partition_map.patch b/target/linux/kirkwood/patches-3.3/001-partition_map.patch
deleted file mode 100644
index 0f94adc..0000000
--- a/target/linux/kirkwood/patches-3.3/001-partition_map.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
-+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
-@@ -33,7 +33,7 @@ static struct mtd_partition sheevaplug_n
- 		.offset = MTDPART_OFS_NXTBLK,
- 		.size = SZ_4M
- 	}, {
--		.name = "root",
-+		.name = "rootfs",
- 		.offset = MTDPART_OFS_NXTBLK,
- 		.size = MTDPART_SIZ_FULL
- 	},
diff --git a/target/linux/kirkwood/patches-3.3/002-mvsdio_delay.patch b/target/linux/kirkwood/patches-3.3/002-mvsdio_delay.patch
deleted file mode 100644
index 46e2a56..0000000
--- a/target/linux/kirkwood/patches-3.3/002-mvsdio_delay.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/drivers/mmc/core/sd.c
-+++ b/drivers/mmc/core/sd.c
-@@ -389,6 +389,15 @@ int mmc_sd_switch_hs(struct mmc_card *ca
- 		return -ENOMEM;
- 	}
- 
-+	/*
-+	 * Some SDHC cards, notably those with a Sandisk SD controller
-+	 * (also found in Kingston products) need a bit of slack
-+	 * before successfully handling the SWITCH command.  So far,
-+	 * cards identifying themselves as "SD04G" and "SD08G" are
-+	 * affected
-+	 */
-+	udelay(1000);
-+
- 	err = mmc_sd_switch(card, 1, 0, 1, status);
- 	if (err)
- 		goto out;
---- a/drivers/mmc/core/core.c
-+++ b/drivers/mmc/core/core.c
-@@ -529,9 +529,9 @@ void mmc_set_data_timeout(struct mmc_dat
- 			 * The limit is really 250 ms, but that is
- 			 * insufficient for some crappy cards.
- 			 */
--			limit_us = 300000;
-+			limit_us = 500000;
- 		else
--			limit_us = 100000;
-+			limit_us = 200000;
- 
- 		/*
- 		 * SDHC cards always use these fixed values.