lantiq: use the compatible string as board name

Use the first compatible string as board name in userspace. Add the new
board name as well as the former used board name to the image metadata
to keep compatibilty with already deployed installations.

Don't add the former used boardname for boards which exists only in
master or evaluation boards.

Signed-off-by: Mathias Kresin <dev@kresin.me>

7 files changed, 71 insertions, 67 deletions

diff --git a/target/linux/lantiq/base-files/etc/board.d/01_leds b/target/linux/lantiq/base-files/etc/board.d/01_leds
index 187ae68..0426fb1 100755
--- a/target/linux/lantiq/base-files/etc/board.d/01_leds
+++ b/target/linux/lantiq/base-files/etc/board.d/01_leds
@@ -32,40 +32,43 @@ led_dsl="$(get_dt_led dsl)"
 board=$(board_name)
 
 case "$board" in
-ALL0333CJ)
+allnet,all0333cj)
 	ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
 	;;
-ARV4525PW)
+arcadyan,arv4525pw)
 	ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
 	;;
-ARV7506PW11)
+arcadyan,arv7506pw11)
 	ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
 	;;
-ARV7519RW22)
+arcadyan,arv7519rw22)
 	ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1"
 	;;
-ARV752DPW22)
+arcadyan,arv752dpw22)
 	ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio"
 	;;
-BTHOMEHUBV5A)
+bt,homehub-v5a)
 	ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
 	;;
-DM200)
+netgear,dm200)
 	ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0"
 	;;
-FRITZ7320)
+avm,fritz7320)
 	ucidef_set_led_netdev "wifi" "wifi" "fritz7320:green:wlan" "wlan0"
 	;;
-P2812HNUF*)
+zyxel,p-2812hnu-f1|\
+zyxel,p-2812hnu-f3)
 	ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio"
 	;;
-VGV7510KW22*)
+arcadyan,vgv7510kw22-nor|\
+arcadyan,vgv7510kw22-brn)
 	ucidef_set_led_wlan "wifi" "wifi" "vgv7510kw22:green:wlan" "phy0radio"
 	;;
-VGV7519*)
+arcadyan,vgv7519-nor|\
+arcadyan,vgv7519-brn)
 	ucidef_set_led_wlan "wifi" "wifi" "vgv7519:green:wireless" "phy0radio"
 	;;
-WBMR300)
+buffalo,wbmr-300hpd)
 	ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08"
 	ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04"
 	ucidef_set_led_switch "wan" "WAN" "wbmr300:green:wan" "switch0" "0x10"
diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index 0a52f1c..efe631c 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -23,199 +23,199 @@ interface_wan="dsl0"
 board=$(board_name)
 
 case "$board" in
-ACMP252)
+audiocodes,mp-252)
 	ucidef_add_switch "switch0" \
 		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
 	;;
 
-ALL0333CJ)
+allnet,all0333cj)
 	annex="b"
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_set_interface_lan 'eth0'
 	;;
 
-ARV4510PW)
+arcadyan,arv4510pw)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
 	;;
 
-ARV4519PW|ARV7510PW22|ARV7518PW)
+arcadyan,arv4519pw|arcadyan,arv7510pw22|arcadyan,arv7518pw)
 	ucidef_add_switch "switch0" \
 		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 	;;
 
-ARV4520PW)
+arcadyan,arv4520pw)
 	annex="b"
 	ucidef_add_switch "switch0" \
 		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
 	;;
 
-ARV4525PW|ARV452CQW|ARV7525PW|ARV752DPW)
+arcadyan,arv4525pw|arcadyan,arv452cqw|arcadyan,arv7525pw|arcadyan,arv752dpw)
 	annex="b"
 	ucidef_set_interface_lan 'eth0'
 	;;
 
-ARV7506PW11)
+arcadyan,arv7506pw11)
 	annex="b"
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
 	ucidef_add_switch "switch0" \
 		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
 	;;
 
-ARV7519PW)
+arcadyan,arv7519pw)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
 	;;
 
-ARV7519RW22)
+arcadyan,arv7519rw22)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
 	;;
 
-ARV752DPW22|ARV8539PW22)
+arcadyan,arv752dpw22|arcadyan,arv8539pw22)
 	annex="b"
 	ucidef_add_switch "switch0" \
 		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 	;;
 
-ASL56026)
+alphanetworks,asl56026)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
 	ucidef_add_switch "switch0"\
 		"2:lan" "3:lan" "6t@eth0"
 	;;
 
-BTHOMEHUBV2B)
+bt,homehub-v2b)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
 	;;
 
-BTHOMEHUBV3A)
+bt,homehub-v3a)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_set_interface_lan 'eth0'
 	;;
 
-BTHOMEHUBV5A)
+bt,homehub-v5a)
 	lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 	;;
 
-DGN1000B)
+netgear,dgn1000b)
 	annex="b"
 	ucidef_set_interface_lan 'eth0'
 	;;
 
-DGN3500*)
+netgear,dgn3500|netgear,dgn3500b)
 	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
 	;;
 
-DM200)
+netgear,dm200)
 	lan_mac=$(mtd_get_mac_binary ART 0)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_set_interface_lan 'eth0'
 	;;
 
-EASY80920NAND|EASY80920NOR)
+lantiq,easy80920-nand|lantiq,easy80920-nor)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 	;;
 
-FRITZ3370)
+avm,fritz3370)
 	annex="b"
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
 	ucidef_set_interface_lan 'eth0'
 	;;
 
-FRITZ7320)
+avm,fritz7320)
 	annex="b"
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
 	ucidef_set_interface_lan 'eth0'
 	;;
 
-FRITZ7360SL)
+avm,fritz7360sl)
 	annex="b"
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
 
-GIGASX76X)
+siemens,gigaset-sx76x)
 	annex="b"
 	ucidef_add_switch "switch0" \
 		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
 	;;
 
-H201L)
+zte,h201l)
 	annex="b"
 	ucidef_add_switch "switch0" \
 		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
 	;;
 
-P2601HNFX)
+zyxel,p-2601hn)
 	ucidef_add_switch "switch0" \
 		"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
 	;;
 
-P2812HNUF*)
+zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3)
 	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
 	;;
 
-TDW8970|TDW8980)
+tplink,tdw8970|tplink,tdw8980)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
 	;;
 
-VG3503J)
+arcadyan,vg3503j)
 	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
 		"2:lan:1" "4:lan:2" "6t@eth0"
 	;;
 
-VR200v)
+tplink,vr200v)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 	;;
 
-VGV7510KW22*)
+arcadyan,vgv7510kw22-nor|arcadyan,vgv7510kw22-brn)
 	annex="b"
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
 	ucidef_add_switch "switch0" \
 		"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
 	;;
 
-VGV7519*)
+arcadyan,vgv7519-nor|arcadyan,vgv7519-brn)
 	wan_mac=$(mtd_get_mac_binary board_config 22)
 	ucidef_add_switch "switch0" \
 		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 	;;
 
-WBMR)
+buffalo,wbmr-hp-g300h)
 	ucidef_add_switch "switch0" \
 		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 	;;
 
-WBMR300)
+buffalo,wbmr-300hpd)
 	lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
 	wan_mac="$lan_mac"
 	ucidef_add_switch "switch0" \
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 1c2b845..6b4d09d 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -38,7 +38,7 @@ case "$FIRMWARE" in
 "ath10k/cal-pci-0000:02:00.0.bin")
 	board=$(board_name)
 	case $board in
-		BTHOMEHUBV5A)
+		bt,homehub-v5a)
 			ath10k_caldata_extract_ubi "caldata" 20480 2116
 			ath10k_caldata_set_macaddr $(macaddr_add $(mtd_get_mac_binary_ubi caldata 4364) +3)
 			;;
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
index 7144423..498a509 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -116,32 +116,32 @@ case "$FIRMWARE" in
 		board=$(board_name)
 
 		case "$board" in
-			ARV7518PW)
+			arcadyan,arv7518pw)
 				ath9k_eeprom_extract "boardconfig" 1024 1
 				;;
-			ARV8539PW22)
+			arcadyan,arv8539pw22)
 				ath9k_eeprom_extract "art" 1024 1
 				;;
-			BTHOMEHUBV2B)
+			bt,homehub-v2b)
 				ath9k_eeprom_extract "art" 0 1
 				ath9k_patch_fw_mac_crc "00:00:00:00:00:00" 524
 				;;
-			BTHOMEHUBV3A)
+			bt,homehub-v3a)
 				ath9k_eeprom_extract "art-copy" 0 1
 				ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 268
 				;;
-			BTHOMEHUBV5A)
+			bt,homehub-v5a)
 				ath9k_ubi_eeprom_extract "caldata" 4096 0
 				ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 4364) +2) 268
 				;;
-			DGN3500*)
+			netgear,dgn3500|netgear,dgn3500b)
 				ath9k_eeprom_extract "calibration" 61440 0
 				ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524
 				;;
-			FRITZ3370|FRITZ7320|FRITZ7360SL)
+			avm,fritz3370|avm,fritz7320|avm,fritz7360sl)
 				ath9k_eeprom_extract "urlader" 2437 0
 				;;
-			TDW8970|TDW8980)
+			tplink,tdw8970|tplink,tdw8980)
 				ath9k_eeprom_extract "boardconfig" 135168 0
 				;;
 			*)
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/01_led_migration b/target/linux/lantiq/base-files/etc/uci-defaults/01_led_migration
index 6ff4355..dc594e3 100644
--- a/target/linux/lantiq/base-files/etc/uci-defaults/01_led_migration
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/01_led_migration
@@ -56,20 +56,21 @@ migrate_leds()
 }
 
 case "$(board_name)" in
-ARV452CQW|\
-ARV7510PW22|\
-ARV7519RW22|\
-ARV752DPW|\
-ARV752DPW22|\
-ASL56026|\
-BTHOMEHUBV2B|\
-BTHOMEHUBV3A|\
-BTHOMEHUBV5A|\
-FRTZ7360SL|\
-VG3503J)
+arcadyan,arv452cqw|\
+arcadyan,arv7510pw22|\
+arcadyan,arv7519rw22|\
+arcadyan,arv752dpw|\
+arcadyan,arv752dpw22|\
+alphanetworks,asl56026|\
+bt,homehub-v2b|\
+bt,homehub-v3a|\
+bt,homehub-v5a|\
+avm,fritz7360sl|\
+arcadyan,vg3503j)
 	do_internet_led_rename
 	;;
-DGN3500*)
+netgear,dgn3500|\
+netgear,dgn3500b)
 	migrate_leds "dgn3500:blue:wireless=dgn3500:green:wireless"
 	;;
 *)
diff --git a/target/linux/lantiq/base-files/lib/preinit/01_preinit_board.sh b/target/linux/lantiq/base-files/lib/preinit/01_preinit_board.sh
index aef9460..bbbac97 100755
--- a/target/linux/lantiq/base-files/lib/preinit/01_preinit_board.sh
+++ b/target/linux/lantiq/base-files/lib/preinit/01_preinit_board.sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 
 lantiq_board_detect() {
-	name=`grep "^machine" /proc/cpuinfo | sed "s/machine.*: \(.*\)/\1/g" | sed "s/\(.*\) - .*/\1/g"`
+	name="$(strings /proc/device-tree/compatible | head -1)"
 	model=`grep "^machine" /proc/cpuinfo | sed "s/machine.*: \(.*\)/\1/g" | sed "s/.* - \(.*\)/\1/g"`
 	[ -z "$name" ] && name="unknown"
 	[ -z "$model" ] && model="unknown"
diff --git a/target/linux/lantiq/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/base-files/lib/upgrade/platform.sh
index 9158fa7..77b3868 100755
--- a/target/linux/lantiq/base-files/lib/upgrade/platform.sh
+++ b/target/linux/lantiq/base-files/lib/upgrade/platform.sh
@@ -9,7 +9,7 @@ platform_pre_upgrade() {
 	local board=$(board_name)
 
 	case "$board" in
-	BTHOMEHUBV2B|BTHOMEHUBV3A|BTHOMEHUBV5A|P2812HNUF* )
+	bt,homehub-v2b|bt,homehub-v3a|bt,homehub-v5a|zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3)
 		nand_do_upgrade $1
 		;;
 	esac