diff options
| author | Piotr Dymacz <pepe2k@gmail.com> | 2017-03-31 13:37:31 +0200 |
|---|---|---|
| committer | Piotr Dymacz <pepe2k@gmail.com> | 2017-07-23 00:26:51 +0200 |
| commit | 3959110c5b8b7b9f757d547dc01bf226f2bd1e34 (patch) | |
| tree | 1447acd1ffe02f85fe86226d6b14c1a51c0632f3 /target/linux/lantiq/dts/danube.dtsi | |
| parent | f6907dcc7968a81ebbe75b630dde919468cc8025 (diff) | |
| download | mtk-20170518-3959110c5b8b7b9f757d547dc01bf226f2bd1e34.zip mtk-20170518-3959110c5b8b7b9f757d547dc01bf226f2bd1e34.tar.gz mtk-20170518-3959110c5b8b7b9f757d547dc01bf226f2bd1e34.tar.bz2 | |
ar71xx: add support for ALFA Network AP121F
ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users.
Device is based on Atheros AR9331 WiSoC and is running a custom version
(updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware.
Specification:
- 400/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR1)
- 16 MB of FLASH (SPI NOR)
- 1x 10/100 Mbps Ethernet
- 1T1R 2.4 GHz
- 1x microSD (optional, on separate PCB)
- 3x LED, 1x button, 1x switch
- UART header on PCB
Flash instruction (under U-Boot web recovery mode):
1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with RJ45 port, press the reset button, power up device,
wait for first blink of all LEDs (indicates network setup), then keep
button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/lantiq/dts/danube.dtsi')
0 files changed, 0 insertions, 0 deletions