add devicetrees

SVN-Revision: 34691

1 files changed, 87 insertions, 54 deletions

diff --git a/target/linux/lantiq/image/ARV752DPW.dts b/target/linux/lantiq/image/ARV752DPW.dts
index eb28b9b..3c58f7e 100644
--- a/target/linux/lantiq/image/ARV752DPW.dts
+++ b/target/linux/lantiq/image/ARV752DPW.dts
@@ -3,6 +3,8 @@
 /include/ "danube.dtsi"
 
 / {
+	model = "ARV752DPW - Arcor 802";
+
 	chosen {
 		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
 	};
@@ -11,16 +13,15 @@
 		reg = <0x0 0x4000000>;
 	};
 
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpiomm 1 0>;
+		};
+	};
+
 	fpi@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		localbus@0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-				1 0 0x4000000 0x4000010>; /* addsel1 */
-			compatible = "lantiq,localbus", "simple-bus";
-
 			nor-boot@0 {
 				compatible = "lantiq,nor";
 				bank-width = <2>;
@@ -37,6 +38,7 @@
 				partition@10000 {
 					label = "uboot_env";
 					reg = <0x10000 0x10000>;
+					read-only;
 				};
 
 				partition@20000 {
@@ -45,11 +47,18 @@
 				};
 
 				partition@7f0000 {
-					label = "boardconfig";
+					label = "board_config";
 					reg = <0x7f0000 0x10000>;
 					read-only;
 				};
 			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0x7f0016 0x6>;
+				mac-increment = <2>;
+			};
+
 			gpiomm: gpiomm@4000000 {
 				compatible = "lantiq,gpio-mm";
 				reg = <1 0x0 0x10 >;
@@ -57,130 +66,154 @@
 				#size-cells = <1>;
 				#gpio-cells = <2>;
 				gpio-controller;
-				lantiq,shadow = <2>;
+				lantiq,shadow = <0x3>;
 			};
 		};
 
 		gpio: pinmux@E100B10 {
-			compatible = "lantiq,pinctrl-xway";
 			pinctrl-names = "default";
 			pinctrl-0 = <&state_default>;
 
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100B10 0xA0>;
-
 			state_default: pinmux {
 				ebu {
 					lantiq,groups = "ebu cs1";
 					lantiq,function = "ebu";
 				};
-				pci {
-					lantiq,groups = "gnt1", "req1";
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_in {
+					lantiq,groups = "req2", "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
 					lantiq,function = "pci";
+					lantiq,output = <1>;
 				};
-				conf_out {
-					lantiq,pins = "io3", "io5", "io6", "io8", /* leds */
-							"io21"; /* pci-rst */
-					lantiq,open-drain;
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+				leds {
+					lantiq,pins = "io3", "io5", "io6", "io8";
+					lantiq,output = <1>;
 					lantiq,pull = <0>;
 				};
+				keys {
+					lantiq,pins = "io11", "io12", "io13", "io28";
+					lantiq,output = <0>;
+					lantiq,pull = <2>;
+					lantiq,open-drain = <1>;
+				};
 			};
 		};
 
-		adsl: dsl@E116000 {
-			compatible = "lantiq,dsl-xway";
-			interrupt-parent = <&icu0>;
-			interrupts = <63 96>;
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpiomm 0 0>;
 		};
 
 		etop@E180000 {
-			compatible = "lantiq,etop-xway";
-			reg = <0xE180000 0x40000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <73 78>;
 			phy-mode = "rmii";
-			mac-address = [ 00 11 22 33 44 55 ];
 		};
 
 		pci@E105400 {
-			lantiq,bus-clock = <33333333>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-                                0x7000 0 0 1 &icu0 30 1 // slot 14, irq 29
-			>;
+			status = "okay";
 			lantiq,external-clock;
 			gpio-reset = <&gpio 21 0>;
+			interrupt-map = <0x7000 0 0 1 &icu0 135>;
 			req-mask = <0x3>;
 		};
 
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys1";
+	ralink_eep {
+		compatible = "ralink,eeprom";
+		ralink,eeprom = "RT2860.eeprom";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		
+	/*	wps {
+			label = "wps";
+			gpios = <&gpio 11 1>;
+			linux,code = <0x211>;
+		};*/
+		restart {
+			label = "restart";
+			gpios = <&gpio 12 0>;
+			linux,code = <0x110>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 13 0>;
+			linux,code = <0x111>;
+		};
 		reset {
-			label = "Reset";
-			gpios = <&gpio 29 1>;
-			gpio-key,wakeup;
+			label = "reset";
+			gpios = <&gpio 28 0>;
 			linux,code = <0x100>;
 		};
 	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
-		power0 {
-			label = "power0";
+		power {
+			label = "power";
 			gpios = <&gpio 3 1>;
-			default-state = "on";
 		};
 		message {
 			label = "message";
 			gpios = <&gpio 5 1>;
-			default-state = "on";
 		};
 		power1 {
 			label = "power1";
 			gpios = <&gpio 6 1>;
-			default-state = "on";
 		};
 		voice1 {
 			label = "voice1";
 			gpios = <&gpio 8 1>;
-			default-state = "on";
 		};
 		microphone {
-			label = "microphone";
+			/* use this led as te usb led */
+			label = "usb";
 			gpios = <&gpiomm 3 1>;
-			default-state = "on";
 		};
 		wifi {
 			label = "wifi";
 			gpios = <&gpiomm 4 1>;
-			default-state = "on";
 		};
 		fxs1 {
 			label = "fxs1";
 			gpios = <&gpiomm 5 1>;
-			default-state = "on";
 		};
 		fx2 {
 			label = "fxs2";
 			gpios = <&gpiomm 6 1>;
-			default-state = "on";
 		};
 		fxo {
 			label = "fxo";
 			gpios = <&gpiomm 7 1>;
-			default-state = "on";
 		};
 		internet {
 			label = "internet";
 			gpios = <&gpiomm 8 1>;
-			default-state = "on";
 		};
 		voice2 {
 			label = "voice2";
 			gpios = <&gpiomm 9 1>;
-			default-state = "on";
 		};
 	};
 };