diff options
| author | John Crispin <john@openwrt.org> | 2012-02-14 17:48:04 +0000 |
|---|---|---|
| committer | John Crispin <john@openwrt.org> | 2012-02-14 17:48:04 +0000 |
| commit | cd1a204365fff2639329c28c1b986f3a4e7246d4 (patch) | |
| tree | 110a78ac8772fcb23ba40e73117c18271957f642 /target/linux/lantiq/image | |
| parent | 17e17170332f0fba7a53dbb0bd7480a639cf8ef7 (diff) | |
| download | mtk-20170518-cd1a204365fff2639329c28c1b986f3a4e7246d4.zip mtk-20170518-cd1a204365fff2639329c28c1b986f3a4e7246d4.tar.gz mtk-20170518-cd1a204365fff2639329c28c1b986f3a4e7246d4.tar.bz2 | |
Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 30532
Diffstat (limited to 'target/linux/lantiq/image')
| -rw-r--r-- | target/linux/lantiq/image/Makefile | 9 |
1 files changed, 8 insertions, 1 deletions
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index 8c607b2..9ccf45d 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -23,6 +23,12 @@ define PatchKernelLzma $(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).lzma) endef +define MkBrnImage + mkbrncmdline -i $(KDIR)/vmlinux-$(4) -o $(KDIR)/vmlinux-$(4)-brn BRN-BOOT $(6) + $(call CompressLzma,$(KDIR)/vmlinux-$(4)-brn,$(KDIR)/vmlinux-$(4)-brn.lzma) + mkbrnimg -s $(1) -m $(2) -o $(3) $(KDIR)/vmlinux-$(4)-brn.lzma $(KDIR)/root.$(5) +endef + define MkImageLzma mkimage -A mips -O linux -T kernel -a 0x80002000 -C lzma \ -e 0x80002000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ @@ -32,6 +38,7 @@ endef define Image/Build/squashfs cat $(KDIR)/uImage-$(2) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image $(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image) + $(if $(3),$(call MkBrnImage,$(3),$(4),$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(3)-brnImage,$(2),$(1),$(5))) endef define Image/Build/jffs2-64k @@ -109,7 +116,7 @@ define Image/BuildKernel/Profile/ARV4525PW endef define Image/Build/Profile/ARV4525PW - $(call Image/Build/$(1),$(1),ARV4525PW) + $(call Image/Build/$(1),$(1),ARV4525PW,BRNDTW502,0x12345678,memsize=32) endef define Image/BuildKernel/Profile/ARV7525PW |