summaryrefslogtreecommitdiff
path: root/target/linux/lantiq
diff options
context:
space:
mode:
authorMathias Kresin <dev@kresin.me>2016-05-26 23:11:16 +0200
committerJohn Crispin <john@phrozen.org>2016-05-27 15:50:17 +0200
commit4d5db712e3618a37e85e383da82d131df37ba3e9 (patch)
tree5c4ffaa744435eae59c185bba8ddcb370a9c4bf1 /target/linux/lantiq
parentb0a202ebdc4e523c66d593c9933beda69ce274c6 (diff)
downloadmtk-20170518-4d5db712e3618a37e85e383da82d131df37ba3e9.zip
mtk-20170518-4d5db712e3618a37e85e383da82d131df37ba3e9.tar.gz
mtk-20170518-4d5db712e3618a37e85e383da82d131df37ba3e9.tar.bz2
lantiq: VGV7510KW22 - fix pinmux configuration
The STP pinmux was initially added in assumption LAN2 led is driven by it. It worked somehow because STP group and gphy0 led0 share the GPIO. Do it the right way by adding the gphy0 led0 the gphy function. According to the author, the SPI node is a copy & paste leftover. Which makes sense since nothing is connected to the SPI bus on this device. Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/lantiq')
-rw-r--r--target/linux/lantiq/dts/VGV7510KW22.dtsi26
1 files changed, 1 insertions, 25 deletions
diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi
index c9045fa..ed3a6e8 100644
--- a/target/linux/lantiq/dts/VGV7510KW22.dtsi
+++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi
@@ -55,18 +55,11 @@
lantiq,pull = <1>;
};
gphy-leds {
- lantiq,groups = "gphy0 led1",
+ lantiq,groups = "gphy0 led0", "gphy0 led1",
"gphy1 led0", "gphy1 led1";
lantiq,function = "gphy";
lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
lantiq,pull = <2>;
- lantiq,open-drain = <0>;
lantiq,output = <1>;
};
mdio {
@@ -79,26 +72,9 @@
lantiq,pull = <0>;
lantiq,output = <1>;
};
- spi {
- lantiq,groups = "spi_di", "spi_do", "spi_clk";
- lantiq,function = "spi";
- };
};
};
- stp: stp@E100BB0 {
- compatible = "lantiq,gpio-stp-xway";
- reg = <0xE100BB0 0x40>;
- #gpio-cells = <2>;
- gpio-controller;
-
- lantiq,shadow = <0xff>;
- lantiq,groups = <0x1>;
- lantiq,dsl = <0x0>;
- lantiq,phy1 = <0x7>;
- lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */
- };
-
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 47 0>;