lantiq: fix falcon build breakage

dev-wifi-rt2x00 fails to build on falcon due to missing pci

SVN-Revision: 29129

4 files changed, 30 insertions, 18 deletions

diff --git a/target/linux/lantiq/files-3.1/arch/mips/lantiq/dev-wifi-rt2x00.c b/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/dev-wifi-rt2x00.c
index 94932df..94932df 100644
--- a/target/linux/lantiq/files-3.1/arch/mips/lantiq/dev-wifi-rt2x00.c
+++ b/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/dev-wifi-rt2x00.c
diff --git a/target/linux/lantiq/files-3.1/arch/mips/lantiq/dev-wifi-rt2x00.h b/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/dev-wifi-rt2x00.h
index 060ca50..060ca50 100644
--- a/target/linux/lantiq/files-3.1/arch/mips/lantiq/dev-wifi-rt2x00.h
+++ b/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/dev-wifi-rt2x00.h
diff --git a/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-arv45xx.c b/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-arv45xx.c
index 6768546..249cc9b 100644
--- a/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-arv45xx.c
+++ b/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-arv45xx.c
@@ -25,7 +25,7 @@
 #include <dev-gpio-buttons.h>
 
 #include "../machtypes.h"
-#include "../dev-wifi-rt2x00.h"
+#include "dev-wifi-rt2x00.h"
 #include "devices.h"
 #include "dev-dwc_otg.h"
 
diff --git a/target/linux/lantiq/patches/211-devices.patch b/target/linux/lantiq/patches/211-devices.patch
index 4c3f50f..dd02806 100644
--- a/target/linux/lantiq/patches/211-devices.patch
+++ b/target/linux/lantiq/patches/211-devices.patch
@@ -1,5 +1,7 @@
---- a/arch/mips/lantiq/devices.c
-+++ b/arch/mips/lantiq/devices.c
+Index: linux-3.1.1/arch/mips/lantiq/devices.c
+===================================================================
+--- linux-3.1.1.orig/arch/mips/lantiq/devices.c	2011-11-14 20:22:33.588135463 +0100
++++ linux-3.1.1/arch/mips/lantiq/devices.c	2011-11-14 20:22:34.328135495 +0100
 @@ -18,6 +18,7 @@
  #include <linux/time.h>
  #include <linux/io.h>
@@ -8,7 +10,7 @@
  
  #include <asm/bootinfo.h>
  #include <asm/irq.h>
-@@ -100,3 +101,20 @@ void __init ltq_register_pci(struct ltq_
+@@ -100,3 +101,20 @@
  	pr_err("kernel is compiled without PCI support\n");
  }
  #endif
@@ -29,27 +31,33 @@
 +	cp1_base =
 +		(void*)CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE, &dma, GFP_ATOMIC));
 +}
---- a/arch/mips/lantiq/devices.h
-+++ b/arch/mips/lantiq/devices.h
-@@ -23,5 +23,6 @@ extern void ltq_register_nor(struct phys
+Index: linux-3.1.1/arch/mips/lantiq/devices.h
+===================================================================
+--- linux-3.1.1.orig/arch/mips/lantiq/devices.h	2011-11-14 20:22:33.588135463 +0100
++++ linux-3.1.1/arch/mips/lantiq/devices.h	2011-11-14 20:22:34.328135495 +0100
+@@ -23,5 +23,6 @@
  extern void ltq_register_wdt(void);
  extern void ltq_register_asc(int port);
  extern void ltq_register_pci(struct ltq_pci_data *data);
 +extern void ltq_register_tapi(void);
  
  #endif
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
+Index: linux-3.1.1/arch/mips/lantiq/xway/Makefile
+===================================================================
+--- linux-3.1.1.orig/arch/mips/lantiq/xway/Makefile	2011-11-14 20:22:34.304135491 +0100
++++ linux-3.1.1/arch/mips/lantiq/xway/Makefile	2011-11-14 20:39:51.404179655 +0100
 @@ -1,5 +1,7 @@
  obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o nand.o timer.o
  
-+obj-y += dev-dwc_otg.o
++obj-y += dev-dwc_otg.o dev-wifi-rt2x00.o
 +
  obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
  obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o
  obj-$(CONFIG_SOC_VR9) += clk-vr9.o prom-vr9.o
---- a/arch/mips/lantiq/xway/devices.c
-+++ b/arch/mips/lantiq/xway/devices.c
+Index: linux-3.1.1/arch/mips/lantiq/xway/devices.c
+===================================================================
+--- linux-3.1.1.orig/arch/mips/lantiq/xway/devices.c	2011-11-14 20:22:34.092135483 +0100
++++ linux-3.1.1/arch/mips/lantiq/xway/devices.c	2011-11-14 20:22:34.328135495 +0100
 @@ -19,6 +19,7 @@
  #include <linux/time.h>
  #include <linux/io.h>
@@ -58,7 +66,7 @@
  
  #include <asm/bootinfo.h>
  #include <asm/irq.h>
-@@ -99,3 +100,98 @@ ltq_register_etop(struct ltq_eth_data *e
+@@ -99,3 +100,98 @@
  		platform_device_register(&ltq_etop);
  	}
  }
@@ -157,8 +165,10 @@
 +	ltq_spi.dev.platform_data = pdata;
 +	platform_device_register(&ltq_spi);
 +}
---- a/arch/mips/lantiq/xway/devices.h
-+++ b/arch/mips/lantiq/xway/devices.h
+Index: linux-3.1.1/arch/mips/lantiq/xway/devices.h
+===================================================================
+--- linux-3.1.1.orig/arch/mips/lantiq/xway/devices.h	2011-11-11 21:19:27.000000000 +0100
++++ linux-3.1.1/arch/mips/lantiq/xway/devices.h	2011-11-14 20:22:34.328135495 +0100
 @@ -11,10 +11,17 @@
  
  #include "../devices.h"
@@ -177,14 +187,16 @@
 +extern void ltq_register_gpio_buttons(struct gpio_button *buttons, int cnt);
  
  #endif
---- a/arch/mips/lantiq/Makefile
-+++ b/arch/mips/lantiq/Makefile
+Index: linux-3.1.1/arch/mips/lantiq/Makefile
+===================================================================
+--- linux-3.1.1.orig/arch/mips/lantiq/Makefile	2011-11-14 20:22:33.640135462 +0100
++++ linux-3.1.1/arch/mips/lantiq/Makefile	2011-11-14 20:39:09.852178049 +0100
 @@ -4,7 +4,7 @@
  # under the terms of the GNU General Public License version 2 as published
  # by the Free Software Foundation.
  
 -obj-y := irq.o setup.o clk.o prom.o devices.o
-+obj-y := irq.o setup.o clk.o prom.o devices.o dev-gpio-leds.o dev-gpio-buttons.o dev-wifi-rt2x00.o
++obj-y := irq.o setup.o clk.o prom.o devices.o dev-gpio-leds.o dev-gpio-buttons.o
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o