summaryrefslogtreecommitdiff
path: root/target/linux/layerscape
diff options
context:
space:
mode:
authorYutang Jiang <yutang.jiang@nxp.com>2016-12-08 00:07:42 +0800
committerJohn Crispin <john@phrozen.org>2016-12-12 09:57:40 +0100
commitad907e1c03a3a1a236f4836cee085d085f280c8d (patch)
tree6280b4318cb40d6e567a23a250f0d9f564787761 /target/linux/layerscape
parent76fa771a784312f789f5de3d2216c1765a901818 (diff)
downloadmtk-20170518-ad907e1c03a3a1a236f4836cee085d085f280c8d.zip
mtk-20170518-ad907e1c03a3a1a236f4836cee085d085f280c8d.tar.gz
mtk-20170518-ad907e1c03a3a1a236f4836cee085d085f280c8d.tar.bz2
layerscape: add 64b/32b target for ls1046ardb device
Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
Diffstat (limited to 'target/linux/layerscape')
-rw-r--r--target/linux/layerscape/64b/profiles/00-default.mk2
-rw-r--r--target/linux/layerscape/image/Makefile15
-rw-r--r--target/linux/layerscape/patches-4.4/0140-config-add-freescale-config-for-amr64.patch148
-rw-r--r--target/linux/layerscape/patches-4.4/3131-arm64-ls1046a-add-DTS-for-Freescale-LS1046A-SoC.patch1056
-rw-r--r--target/linux/layerscape/patches-4.4/3132-dts-ls1046a-add-LS1046ARDB-board-support.patch557
-rw-r--r--target/linux/layerscape/patches-4.4/3133-ls1046ardb-add-ITS-file.patch69
-rw-r--r--target/linux/layerscape/patches-4.4/3143-armv8-aarch32-Execute-32-bit-Linux-for-ls1046a.patch32
-rw-r--r--target/linux/layerscape/patches-4.4/7126-net-phy-add-driver-for-aquantia-AQR106-107-phy.patch63
-rw-r--r--target/linux/layerscape/patches-4.4/8125-rtc-pcf2127-add-pcf2129-device-id.patch63
-rw-r--r--target/linux/layerscape/patches-4.4/8127-ls1046a-msi-Add-LS1046A-MSI-support.patch25
-rw-r--r--target/linux/layerscape/patches-4.4/8128-pci-layerscape-add-LS1046A-support.patch38
-rw-r--r--target/linux/layerscape/patches-4.4/8129-clk-qoriq-add-ls1046a-support.patch75
-rw-r--r--target/linux/layerscape/patches-4.4/8130-ls1046a-sata-Add-LS1046A-sata-support.patch53
-rw-r--r--target/linux/layerscape/patches-4.4/8134-pci-layerscape-add-LUT-DBG-reigster-offset-member.patch67
-rw-r--r--target/linux/layerscape/patches-4.4/8138-pci-layerscape-add-MSI-interrupt-support.patch259
-rw-r--r--target/linux/layerscape/patches-4.4/8142-drivers-mmc-Add-compatible-string-for-LS1046A.patch25
16 files changed, 2547 insertions, 0 deletions
diff --git a/target/linux/layerscape/64b/profiles/00-default.mk b/target/linux/layerscape/64b/profiles/00-default.mk
index 68b18ba..fc1231d 100644
--- a/target/linux/layerscape/64b/profiles/00-default.mk
+++ b/target/linux/layerscape/64b/profiles/00-default.mk
@@ -10,6 +10,8 @@ endef
DEFAULT_PACKAGES+= \
rcw-layerscape-ls1043ardb uboot-layerscape-$(SUBTARGET)-ls1043ardb \
fman-layerscape-ls1043ardb \
+ rcw-layerscape-ls1046ardb uboot-layerscape-$(SUBTARGET)-ls1046ardb \
+ fman-layerscape-ls1046ardb \
rcw-layerscape-ls1012ardb uboot-layerscape-$(SUBTARGET)-ls1012ardb \
kmod-ppfe ppfe-ls1012ardb
diff --git a/target/linux/layerscape/image/Makefile b/target/linux/layerscape/image/Makefile
index bb94ff8..a06ae9e 100644
--- a/target/linux/layerscape/image/Makefile
+++ b/target/linux/layerscape/image/Makefile
@@ -62,6 +62,21 @@ endif
endef
TARGET_DEVICES += ls1043ardb
+define Device/ls1046ardb
+ DEVICE_TITLE := ls1046ardb-$(SUBTARGET)
+ DEVICE_PACKAGES += rcw-layerscape-ls1046ardb uboot-layerscape-$(SUBTARGET)-ls1046ardb fman-layerscape-ls1046ardb
+ifeq ($(SUBTARGET),64b)
+ DEVICE_DTS = freescale/fsl-ls1046a-rdb
+endif
+ifeq ($(SUBTARGET),32b)
+ DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls1046a-rdb
+endif
+ IMAGE/firmware.bin = append-ls-rcw $(1) | pad-to 1M | append-ls-uboot $(1) | pad-to 3M | \
+ append-ls-fman $(1) | pad-to 4M | append-ls-dtb $$(DEVICE_DTS) | pad-to 5M | \
+ append-kernel | pad-to 10M | append-ls-rootfs-ext4 $(1) 22M | check-size 33554433
+endef
+TARGET_DEVICES += ls1046ardb
+
define Device/ls1012ardb
DEVICE_TITLE := ls1012ardb-$(SUBTARGET)
DEVICE_PACKAGES += rcw-layerscape-ls1012ardb uboot-layerscape-$(SUBTARGET)-ls1012ardb kmod-ppfe ppfe-ls1012ardb
diff --git a/target/linux/layerscape/patches-4.4/0140-config-add-freescale-config-for-amr64.patch b/target/linux/layerscape/patches-4.4/0140-config-add-freescale-config-for-amr64.patch
new file mode 100644
index 0000000..74ff44b
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/0140-config-add-freescale-config-for-amr64.patch
@@ -0,0 +1,148 @@
+From 880b7aa2e2c62e54245fb77d92db502175232d86 Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Wed, 12 Oct 2016 11:01:17 +0800
+Subject: [PATCH 140/141] config: add freescale config for amr64
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ arch/arm64/configs/freescale.config | 134 +++++++++++++++++++++++++++++++++++
+ 1 file changed, 134 insertions(+)
+ create mode 100644 arch/arm64/configs/freescale.config
+
+--- /dev/null
++++ b/arch/arm64/configs/freescale.config
+@@ -0,0 +1,134 @@
++# general options
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SLAB=y
++CONFIG_MODULE_FORCE_LOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_ARM64_VA_BITS_48=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_SIZE=262144
++CONFIG_PRINTK_TIME=y
++CONFIG_PID_IN_CONTEXTIDR=y
++CONFIG_IPV6=y
++# iommu
++CONFIG_IOMMU_SUPPORT=y
++CONFIG_ARM_SMMU=y
++# dpaa2
++CONFIG_STAGING=y
++CONFIG_FSL_MC_BUS=y
++CONFIG_FSL_MC_RESTOOL=y
++CONFIG_FSL_MC_DPIO=y
++CONFIG_FSL_DPAA2=y
++CONFIG_NET_NS=y
++CONFIG_FSL_DPAA2_DCE=y
++CONFIG_FSL_DCE_FLOW_LIMIT=65536
++CONFIG_FSL_DCE_API_TIME_TRIAL=m
++CONFIG_LS_SOC_DRIVERS=y
++# mdio
++CONFIG_FSL_XGMAC_MDIO=y
++CONFIG_MDIO_BUS_MUX_MMIOREG=y
++# phy
++CONFIG_AQUANTIA_PHY=y
++CONFIG_VITESSE_PHY=y
++CONFIG_REALTEK_PHY=y
++CONFIG_FIXED_PHY=y
++# reset support
++CONFIG_POWER_RESET_LAYERSCAPE=y
++# pci
++CONFIG_PCI_LAYERSCAPE=y
++CONFIG_PCI_HOST_GENERIC=y
++CONFIG_E1000=y
++CONFIG_E1000E=y
++# clock driver
++CONFIG_CLK_QORIQ=y
++# usb
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_DWC3=y
++CONFIG_DMADEVICES=y
++# ahci/sata
++CONFIG_AHCI_QORIQ=y
++# esdhc
++CONFIG_MMC_SDHCI_OF_ESDHC=y
++# virtualization
++CONFIG_VHOST_NET=y
++CONFIG_KVM_ARM_MAX_VCPUS=8
++# I2C
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_MUX=y
++CONFIG_I2C_MUX_PCA954x=y
++CONFIG_I2C_IMX=y
++# hardware monitor
++CONFIG_SENSORS_LM90=y
++CONFIG_SENSORS_INA2XX=y
++# DPAA 1
++CONFIG_HAS_FSL_QBMAN=y
++CONFIG_CRYPTO_DEV_FSL_CAAM=y
++# network
++CONFIG_BRIDGE=m
++CONFIG_MACVLAN=y
++CONFIG_FSL_SDK_FMAN=y
++CONFIG_FMAN_ARM=y
++CONFIG_FSL_SDK_DPAA_ETH=y
++CONFIG_INET_ESP=y
++CONFIG_XFRM_USER=y
++CONFIG_NET_KEY=y
++# vfio
++CONFIG_VFIO=y
++CONFIG_VFIO_PCI=y
++CONFIG_VFIO_FSL_MC=y
++# CPU Frequency scaling
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_GOV_COMMON=y
++CONFIG_CPU_FREQ_STAT=y
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
++CONFIG_QORIQ_CPUFREQ=y
++#ifc
++CONFIG_MTD_OF_PARTS=y
++CONFIG_MTD_GEN_PROBE=y
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_ADV_OPTIONS=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_CFI_STAA=y
++CONFIG_MTD_PHYSMAP_OF=y
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_FSL_IFC=y
++#spi
++CONFIG_SPI_FSL_DSPI=y
++CONFIG_MTD_SPI_NOR=y
++CONFIG_MTD_DATAFLASH=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_SST25L=y
++#RTC
++CONFIG_RTC_DRV_DS3232=y
++#CryptoAPI
++CONFIG_CRYPTO_SHA256=y
++CONFIG_CRYPTO_SHA512=y
++# ls1046a
++CONFIG_MTD_CFI_BE_BYTE_SWAP=y
++CONFIG_SPI_FSL_QUADSPI=y
++CONFIG_RTC_DRV_PCF2127=y
++CONFIG_WATCHDOG=y
++CONFIG_IMX2_WDT=y
++CONFIG_HWMON=y
++CONFIG_SENSORS_LM90=y
++CONFIG_SENSORS_INA2XX=y
++CONFIG_EEPROM_AT24=y
++# lpuart
++CONFIG_SERIAL_FSL_LPUART=y
++CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
++# ftm
++CONFIG_FTM_ALARM=y
++# qDMA
++CONFIG_FSL_QDMA=y
++CONFIG_DMATEST=y
++#NVMe
++CONFIG_BLK_DEV_NVME=y
diff --git a/target/linux/layerscape/patches-4.4/3131-arm64-ls1046a-add-DTS-for-Freescale-LS1046A-SoC.patch b/target/linux/layerscape/patches-4.4/3131-arm64-ls1046a-add-DTS-for-Freescale-LS1046A-SoC.patch
new file mode 100644
index 0000000..ca11f9f
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/3131-arm64-ls1046a-add-DTS-for-Freescale-LS1046A-SoC.patch
@@ -0,0 +1,1056 @@
+From 80ca93f1a5590529e39560099a71edb03897050e Mon Sep 17 00:00:00 2001
+From: Mingkai Hu <mingkai.hu@nxp.com>
+Date: Wed, 11 May 2016 11:29:51 +0800
+Subject: [PATCH 131/141] arm64/ls1046a: add DTS for Freescale LS1046A SoC
+
+LS1046a is an SoC with 4 ARMv8 A72 cores and most other IP blocks
+similar to LS1043a which complies to Chassis 2.1 spec.
+
+Following levels of DTSI/DTS files have been created for the
+LS1046A SoC family:
+
+- fsl-ls1046a.dtsi:
+ DTS-Include file for FSL LS1046A SoC.
+
+Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
+Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
+Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
+Signed-off-by: Mihai Bantea <mihai.bantea@freescale.com>
+Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
+---
+ arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1029 ++++++++++++++++++++++++
+ 1 file changed, 1029 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+@@ -0,0 +1,1029 @@
++/*
++ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
++ *
++ * Copyright 2016, Freescale Semiconductor
++ *
++ * Mingkai Hu <mingkai.hu@nxp.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPLv2 or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This library is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This library is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/ {
++ compatible = "fsl,ls1046a";
++ interrupt-parent = <&gic>;
++ #address-cells = <2>;
++ #size-cells = <2>;
++
++ aliases {
++ ethernet0 = &fm1mac1;
++ ethernet1 = &fm1mac2;
++ ethernet2 = &fm1mac3;
++ ethernet3 = &fm1mac4;
++ ethernet4 = &fm1mac5;
++ ethernet5 = &fm1mac6;
++ ethernet6 = &fm1mac9;
++ };
++
++ cpus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ cpu0: cpu@0 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0>;
++ clocks = <&clockgen 1 0>;
++ next-level-cache = <&l2>;
++ };
++
++ cpu1: cpu@1 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x1>;
++ clocks = <&clockgen 1 0>;
++ next-level-cache = <&l2>;
++ };
++
++ cpu2: cpu@2 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x2>;
++ clocks = <&clockgen 1 0>;
++ next-level-cache = <&l2>;
++ };
++
++ cpu3: cpu@3 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x3>;
++ clocks = <&clockgen 1 0>;
++ next-level-cache = <&l2>;
++ };
++
++ l2: l2-cache {
++ compatible = "cache";
++ };
++ };
++
++ memory@80000000 {
++ device_type = "memory";
++ reg = <0x0 0x80000000 0 0x80000000>;
++ /* DRAM space 1, size: 2GiB DRAM */
++ };
++
++ sysclk: sysclk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <100000000>;
++ clock-output-names = "sysclk";
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <1 13 0x1>, /* Physical Secure PPI */
++ <1 14 0x1>, /* Physical Non-Secure PPI */
++ <1 11 0x1>, /* Virtual PPI */
++ <1 10 0x1>; /* Hypervisor PPI */
++ arm,reread-timer;
++ };
++
++ pmu {
++ compatible = "arm,armv8-pmuv3";
++ interrupts = <0 106 0x4>,
++ <0 107 0x4>,
++ <0 95 0x4>,
++ <0 97 0x4>;
++ interrupt-affinity = <&cpu0>,
++ <&cpu1>,
++ <&cpu2>,
++ <&cpu3>;
++ };
++
++ gic: interrupt-controller@1400000 {
++ compatible = "arm,gic-400";
++ #interrupt-cells = <3>;
++ interrupt-controller;
++ reg = <0x0 0x1410000 0 0x10000>, /* GICD */
++ <0x0 0x1420000 0 0x20000>, /* GICC */
++ <0x0 0x1440000 0 0x20000>, /* GICH */
++ <0x0 0x1460000 0 0x20000>; /* GICV */
++ interrupts = <1 9 0xf08>;
++ };
++
++ soc {
++ compatible = "simple-bus";
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++
++ clockgen: clocking@1ee1000 {
++ compatible = "fsl,ls1046a-clockgen";
++ reg = <0x0 0x1ee1000 0x0 0x1000>;
++ #clock-cells = <2>;
++ clocks = <&sysclk>;
++ };
++
++ scfg: scfg@1570000 {
++ compatible = "fsl,ls1046a-scfg", "syscon";
++ reg = <0x0 0x1570000 0x0 0x10000>;
++ big-endian;
++ };
++
++ reset: reset@1ee00b0 {
++ compatible = "fsl,ls-reset";
++ reg = <0x0 0x1ee00b0 0x0 0x4>;
++ big-endian;
++ };
++
++ rcpm: rcpm@1ee2000 {
++ compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1";
++ reg = <0x0 0x1ee2000 0x0 0x10000>;
++ };
++
++ ifc: ifc@1530000 {
++ compatible = "fsl,ifc", "simple-bus";
++ reg = <0x0 0x1530000 0x0 0x10000>;
++ interrupts = <0 43 0x4>;
++ };
++
++ esdhc: esdhc@1560000 {
++ compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
++ reg = <0x0 0x1560000 0x0 0x10000>;
++ interrupts = <0 62 0x4>;
++ clock-frequency = <0>;
++ voltage-ranges = <1800 1800 3300 3300>;
++ sdhci,auto-cmd12;
++ big-endian;
++ bus-width = <4>;
++ };
++
++ qman: qman@1880000 {
++ compatible = "fsl,qman";
++ reg = <0x00 0x1880000 0x0 0x10000>;
++ interrupts = <0 45 0x4>;
++ };
++
++ bman: bman@1890000 {
++ compatible = "fsl,bman";
++ reg = <0x00 0x1890000 0x0 0x10000>;
++ interrupts = <0 45 0x4>;
++ };
++
++ fman0: fman@1a00000 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ cell-index = <0>;
++ compatible = "fsl,fman", "simple-bus";
++ ranges = <0x0 0x00 0x1a00000 0x100000>;
++ reg = <0x00 0x1a00000 0x0 0x100000>;
++ interrupts = <0 44 0x4>, <0 45 0x4>;
++ clocks = <&clockgen 3 0>;
++ clock-names = "fmanclk";
++
++ cc {
++ compatible = "fsl,fman-cc";
++ };
++
++ muram@0 {
++ compatible = "fsl,fman-muram";
++ reg = <0x0 0x60000>;
++ };
++
++ bmi@80000 {
++ compatible = "fsl,fman-bmi";
++ reg = <0x80000 0x400>;
++ };
++
++ qmi@80400 {
++ compatible = "fsl,fman-qmi";
++ reg = <0x80400 0x400>;
++ };
++
++ fman0_oh1: port@82000 {
++ cell-index = <0>;
++ compatible = "fsl,fman-port-oh";
++ reg = <0x82000 0x1000>;
++ };
++
++ fman0_oh2: port@83000 {
++ cell-index = <1>;
++ compatible = "fsl,fman-port-oh";
++ reg = <0x83000 0x1000>;
++ };
++
++ fman0_oh3: port@84000 {
++ cell-index = <2>;
++ compatible = "fsl,fman-port-oh";
++ reg = <0x84000 0x1000>;
++ };
++
++ fman0_oh4: port@85000 {
++ cell-index = <3>;
++ compatible = "fsl,fman-port-oh";
++ reg = <0x85000 0x1000>;
++ };
++
++ fman0_oh5: port@86000 {
++ cell-index = <4>;
++ compatible = "fsl,fman-port-oh";
++ reg = <0x86000 0x1000>;
++ };
++
++ fman0_oh6: port@87000 {
++ cell-index = <5>;
++ compatible = "fsl,fman-port-oh";
++ reg = <0x87000 0x1000>;
++ };
++
++ policer@c0000 {
++ compatible = "fsl,fman-policer";
++ reg = <0xc0000 0x1000>;
++ };
++
++ keygen@c1000 {
++ compatible = "fsl,fman-keygen";
++ reg = <0xc1000 0x1000>;
++ };
++
++ dma@c2000 {
++ compatible = "fsl,fman-dma";
++ reg = <0xc2000 0x1000>;
++ };
++
++ fpm@c3000 {
++ compatible = "fsl,fman-fpm";
++ reg = <0xc3000 0x1000>;
++ };
++
++ parser@c7000 {
++ compatible = "fsl,fman-parser";
++ reg = <0xc7000 0x1000>;
++ };
++
++ vsps@dc000 {
++ compatible = "fsl,fman-vsps";
++ reg = <0xdc000 0x1000>;
++ };
++
++ mdio0: mdio@fc000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0xfc000 0x1000>;
++ };
++
++ xmdio0: mdio@fd000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0xfd000 0x1000>;
++ };
++
++ fman0_rx0: port@88000 {
++ cell-index = <0>;
++ compatible = "fsl,fman-port-1g-rx";
++ reg = <0x88000 0x1000>;
++ };
++
++ fman0_tx0: port@a8000 {
++ cell-index = <0>;
++ compatible = "fsl,fman-port-1g-tx";
++ reg = <0xa8000 0x1000>;
++ };
++
++ fm1mac1: ethernet@e0000 {
++ cell-index = <0>;
++ compatible = "fsl,fman-memac";
++ reg = <0xe0000 0x1000>;
++ fsl,port-handles = <&fman0_rx0 &fman0_tx0>;
++ ptimer-handle = <&ptp_timer0>;
++ };
++
++ mdio@e1000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0xe1000 0x1000>;
++ };
++
++ fman0_rx1: port@89000 {
++ cell-index = <1>;
++ compatible = "fsl,fman-port-1g-rx";
++ reg = <0x89000 0x1000>;
++ };
++
++ fman0_tx1: port@a9000 {
++ cell-index = <1>;
++ compatible = "fsl,fman-port-1g-tx";
++ reg = <0xa9000 0x1000>;
++ };
++
++ fm1mac2: ethernet@e2000 {
++ cell-index = <1>;
++ compatible = "fsl,fman-memac";
++ reg = <0xe2000 0x1000>;
++ fsl,port-handles = <&fman0_rx1 &fman0_tx1>;
++ ptimer-handle = <&ptp_timer0>;
++ };
++
++ mdio@e3000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0xe3000 0x1000>;
++ };
++
++ fman0_rx2: port@8a000 {
++ cell-index = <2>;
++ compatible = "fsl,fman-port-1g-rx";
++ reg = <0x8a000 0x1000>;
++ };
++
++ fman0_tx2: port@aa000 {
++ cell-index = <2>;
++ compatible = "fsl,fman-port-1g-tx";
++ reg = <0xaa000 0x1000>;
++ };
++
++ fm1mac3: ethernet@e4000 {
++ cell-index = <2>;
++ compatible = "fsl,fman-memac";
++ reg = <0xe4000 0x1000>;
++ fsl,port-handles = <&fman0_rx2 &fman0_tx2>;
++ ptimer-handle = <&ptp_timer0>;
++ };
++
++ mdio@e5000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0xe5000 0x1000>;
++ };
++
++ fman0_rx3: port@8b000 {
++ cell-index = <3>;
++ compatible = "fsl,fman-port-1g-rx";
++ reg = <0x8b000 0x1000>;
++ };
++
++ fman0_tx3: port@ab000 {
++ cell-index = <3>;
++ compatible = "fsl,fman-port-1g-tx";
++ reg = <0xab000 0x1000>;
++ };
++
++ fm1mac4: ethernet@e6000 {
++ cell-index = <3>;
++ compatible = "fsl,fman-memac";
++ reg = <0xe6000 0x1000>;
++ fsl,port-handles = <&fman0_rx3 &fman0_tx3>;
++ ptimer-handle = <&ptp_timer0>;
++ };
++
++ mdio@e7000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0xe7000 0x1000>;
++ };
++
++ fman0_rx4: port@8c000 {
++ cell-index = <4>;
++ compatible = "fsl,fman-port-1g-rx";
++ reg = <0x8c000 0x1000>;
++ };
++
++ fman0_tx4: port@ac000 {
++ cell-index = <4>;
++ compatible = "fsl,fman-port-1g-tx";
++ reg = <0xac000 0x1000>;
++ };
++
++ fm1mac5: ethernet@e8000 {
++ cell-index = <4>;
++ compatible = "fsl,fman-memac";
++ reg = <0xe8000 0x1000>;
++ fsl,port-handles = <&fman0_rx4 &fman0_tx4>;
++ ptimer-handle = <&ptp_timer0>;
++ };
++
++ mdio@e9000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0xe9000 0x1000>;
++ };
++
++ fman0_rx5: port@8d000 {
++ cell-index = <5>;
++ compatible = "fsl,fman-port-1g-rx";
++ reg = <0x8d000 0x1000>;
++ };
++
++ fman0_tx5: port@ad000 {
++ cell-index = <5>;
++ compatible = "fsl,fman-port-1g-tx";
++ reg = <0xad000 0x1000>;
++ };
++
++ fm1mac6: ethernet@ea000 {
++ cell-index = <5>;
++ compatible = "fsl,fman-memac";
++ reg = <0xea000 0x1000>;
++ fsl,port-handles = <&fman0_rx5 &fman0_tx5>;
++ ptimer-handle = <&ptp_timer0>;
++ };
++
++ mdio@eb000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0xeb000 0x1000>;
++ };
++
++ fman0_10g_rx0: port@90000 {
++ cell-index = <0>;
++ compatible = "fsl,fman-port-10g-rx";
++ reg = <0x90000 0x1000>;
++ };
++
++ fman0_10g_tx0: port@b0000 {
++ cell-index = <0>;
++ compatible = "fsl,fman-port-10g-tx";
++ reg = <0xb0000 0x1000>;
++ fsl,qman-channel-id = <0x800>;
++ };
++
++ fm1mac9: ethernet@f0000 {
++ cell-index = <0>;
++ compatible = "fsl,fman-memac";
++ reg = <0xf0000 0x1000>;
++ fsl,port-handles = <&fman0_10g_rx0 &fman0_10g_tx0>;
++ };
++
++ mdio@f1000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0xf1000 0x1000>;
++ };
++
++ ptp_timer0: rtc@fe000 {
++ compatible = "fsl,fman-rtc";
++ reg = <0xfe000 0x1000>;
++ };
++ };
++
++ dspi: dspi@2100000 {
++ compatible = "fsl,ls1046a-dspi", "fsl,ls1021a-v1.0-dspi";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2100000 0x0 0x10000>;
++ interrupts = <0 64 0x4>;
++ clock-names = "dspi";
++ clocks = <&clockgen 4 1>;
++ spi-num-chipselects = <5>;
++ big-endian;
++ status = "disabled";
++ };
++
++ qspi: quadspi@1550000 {
++ compatible = "fsl,ls1046a-qspi", "fsl,ls1021a-qspi";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x1550000 0x0 0x10000>,
++ <0x0 0x40000000 0x0 0x10000000>;
++ reg-names = "QuadSPI", "QuadSPI-memory";
++ interrupts = <0 99 0x4>;
++ clock-names = "qspi_en", "qspi";
++ clocks = <&clockgen 4 1>, <&clockgen 4 1>;
++ big-endian;
++ fsl,qspi-has-second-chip;
++ status = "disabled";
++ };
++
++ i2c0: i2c@2180000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2180000 0x0 0x10000>;
++ interrupts = <0 56 0x4>;
++ clock-names = "i2c";
++ clocks = <&clockgen 4 1>;
++ dmas = <&edma0 1 39>,
++ <&edma0 1 38>;
++ dma-names = "tx", "rx";
++ status = "disabled";
++ };
++
++ i2c1: i2c@2190000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2190000 0x0 0x10000>;
++ interrupts = <0 57 0x4>;
++ clock-names = "i2c";
++ clocks = <&clockgen 4 1>;
++ status = "disabled";
++ };
++
++ i2c2: i2c@21a0000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x21a0000 0x0 0x10000>;
++ interrupts = <0 58 0x4>;
++ clock-names = "i2c";
++ clocks = <&clockgen 4 1>;
++ status = "disabled";
++ };
++
++ i2c3: i2c@21b0000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x21b0000 0x0 0x10000>;
++ interrupts = <0 59 0x4>;
++ clock-names = "i2c";
++ clocks = <&clockgen 4 1>;
++ status = "disabled";
++ };
++
++ duart0: serial@21c0500 {
++ compatible = "fsl,ns16550", "ns16550a";
++ reg = <0x00 0x21c0500 0x0 0x100>;
++ interrupts = <0 54 0x4>;
++ clocks = <&clockgen 4 1>;
++ };
++
++ duart1: serial@21c0600 {
++ compatible = "fsl,ns16550", "ns16550a";
++ reg = <0x00 0x21c0600 0x0 0x100>;
++ interrupts = <0 54 0x4>;
++ clocks = <&clockgen 4 1>;
++ };
++
++ duart2: serial@21d0500 {
++ compatible = "fsl,ns16550", "ns16550a";
++ reg = <0x0 0x21d0500 0x0 0x100>;
++ interrupts = <0 55 0x4>;
++ clocks = <&clockgen 4 1>;
++ };
++
++ duart3: serial@21d0600 {
++ compatible = "fsl,ns16550", "ns16550a";
++ reg = <0x0 0x21d0600 0x0 0x100>;
++ interrupts = <0 55 0x4>;
++ clocks = <&clockgen 4 1>;
++ };
++
++ gpio0: gpio@2300000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2300000 0x0 0x10000>;
++ interrupts = <0 66 0x4>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio1: gpio@2310000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2310000 0x0 0x10000>;
++ interrupts = <0 67 0x4>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio2: gpio@2320000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2320000 0x0 0x10000>;
++ interrupts = <0 68 0x4>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio3: gpio@2330000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2330000 0x0 0x10000>;
++ interrupts = <0 134 0x4>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ lpuart0: serial@2950000 {
++ compatible = "fsl,ls1021a-lpuart";
++ reg = <0x0 0x2950000 0x0 0x1000>;
++ interrupts = <0 48 0x4>;
++ clocks = <&clockgen 0 0>;
++ clock-names = "ipg";
++ status = "disabled";
++ };
++
++ lpuart1: serial@2960000 {
++ compatible = "fsl,ls1021a-lpuart";
++ reg = <0x0 0x2960000 0x0 0x1000>;
++ interrupts = <0 49 0x4>;
++ clocks = <&clockgen 4 1>;
++ clock-names = "ipg";
++ status = "disabled";
++ };
++
++ lpuart2: serial@2970000 {
++ compatible = "fsl,ls1021a-lpuart";
++ reg = <0x0 0x2970000 0x0 0x1000>;
++ interrupts = <0 50 0x4>;
++ clocks = <&clockgen 4 1>;
++ clock-names = "ipg";
++ status = "disabled";
++ };
++
++ lpuart3: serial@2980000 {
++ compatible = "fsl,ls1021a-lpuart";
++ reg = <0x0 0x2980000 0x0 0x1000>;
++ interrupts = <0 51 0x4>;
++ clocks = <&clockgen 4 1>;
++ clock-names = "ipg";
++ status = "disabled";
++ };
++
++ lpuart4: serial@2990000 {
++ compatible = "fsl,ls1021a-lpuart";
++ reg = <0x0 0x2990000 0x0 0x1000>;
++ interrupts = <0 52 0x4>;
++ clocks = <&clockgen 4 1>;
++ clock-names = "ipg";
++ status = "disabled";
++ };
++
++ lpuart5: serial@29a0000 {
++ compatible = "fsl,ls1021a-lpuart";
++ reg = <0x0 0x29a0000 0x0 0x1000>;
++ interrupts = <0 53 0x4>;
++ clocks = <&clockgen 4 1>;
++ clock-names = "ipg";
++ status = "disabled";
++ };
++
++ ftm0: ftm0@29d0000 {
++ compatible = "fsl,ftm-alarm";
++ reg = <0x0 0x29d0000 0x0 0x10000>;
++ interrupts = <0 86 0x4>;
++ big-endian;
++ rcpm-wakeup = <&rcpm 0x0 0x20000000>;
++ status = "okay";
++ };
++
++ wdog0: wdog@2ad0000 {
++ compatible = "fsl,ls1046a-wdt", "fsl,imx21-wdt";
++ reg = <0x0 0x2ad0000 0x0 0x10000>;
++ interrupts = <0 83 0x4>;
++ clocks = <&clockgen 4 1>;
++ clock-names = "wdog";
++ big-endian;
++ };
++
++ edma0: edma@2c00000 {
++ #dma-cells = <2>;
++ compatible = "fsl,vf610-edma";
++ reg = <0x0 0x2c00000 0x0 0x10000>,
++ <0x0 0x2c10000 0x0 0x10000>,
++ <0x0 0x2c20000 0x0 0x10000>;
++ interrupts = <0 103 0x4>,
++ <0 103 0x4>;
++ interrupt-names = "edma-tx", "edma-err";
++ dma-channels = <32>;
++ big-endian;
++ clock-names = "dmamux0", "dmamux1";
++ clocks = <&clockgen 4 1>,
++ <&clockgen 4 1>;
++ };
++
++ usb0: usb3@2f00000 {
++ compatible = "snps,dwc3";
++ reg = <0x0 0x2f00000 0x0 0x10000>;
++ interrupts = <0 60 0x4>;
++ dr_mode = "host";
++ configure-gfladj;
++ snps,dis_rxdet_inp3_quirk;
++ };
++
++ usb1: usb3@3000000 {
++ compatible = "snps,dwc3";
++ reg = <0x0 0x3000000 0x0 0x10000>;
++ interrupts = <0 61 0x4>;
++ dr_mode = "host";
++ configure-gfladj;
++ snps,dis_rxdet_inp3_quirk;
++ };
++
++ usb2: usb3@3100000 {
++ compatible = "snps,dwc3";
++ reg = <0x0 0x3100000 0x0 0x10000>;
++ interrupts = <0 63 0x4>;
++ dr_mode = "host";
++ configure-gfladj;
++ snps,dis_rxdet_inp3_quirk;
++ };
++
++ sata: sata@3200000 {
++ compatible = "fsl,ls1046a-ahci";
++ reg = <0x0 0x3200000 0x0 0x10000>;
++ interrupts = <0 69 0x4>;
++ clocks = <&clockgen 4 1>;
++ };
++
++ qdma: qdma@8380000 {
++ compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
++ reg = <0x0 0x838f000 0x0 0x11000 /* Controller regs */
++ 0x0 0x83a0000 0x0 0x40000>; /* Block regs */
++ interrupts = <0 152 0x4>,
++ <0 39 0x4>;
++ interrupt-names = "qdma-error", "qdma-queue";
++ channels = <8>;
++ queues = <2>;
++ status-sizes = <64>;
++ queue-sizes = <64 64>;
++ big-endian;
++ };
++
++ msi1: msi-controller@1580000 {
++ compatible = "fsl,1s1046a-msi";
++ reg = <0x0 0x1580000 0x0 0x10000>;
++ msi-controller;
++ interrupts = <0 116 0x4>,
++ <0 111 0x4>,
++ <0 112 0x4>,
++ <0 113 0x4>;
++ };
++
++ msi2: msi-controller@1590000 {
++ compatible = "fsl,1s1046a-msi";
++ reg = <0x0 0x1590000 0x0 0x10000>;
++ msi-controller;
++ interrupts = <0 126 0x4>,
++ <0 121 0x4>,
++ <0 122 0x4>,
++ <0 123 0x4>;
++ };
++
++ msi3: msi-controller@15a0000 {
++ compatible = "fsl,1s1046a-msi";
++ reg = <0x0 0x15a0000 0x0 0x10000>;
++ msi-controller;
++ interrupts = <0 160 0x4>,
++ <0 155 0x4>,
++ <0 156 0x4>,
++ <0 157 0x4>;
++ };
++
++ pcie@3400000 {
++ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
++ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 118 0x4>, /* controller interrupt */
++ <0 117 0x4>; /* PME interrupt */
++ interrupt-names = "intr", "pme";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ num-lanes = <4>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&msi1>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
++ <0000 0 0 2 &gic 0 110 0x4>,
++ <0000 0 0 3 &gic 0 110 0x4>,
++ <0000 0 0 4 &gic 0 110 0x4>;
++ };
++
++ pcie@3500000 {
++ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
++ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 128 0x4>,
++ <0 127 0x4>;
++ interrupt-names = "intr", "pme";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ num-lanes = <2>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&msi2>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 120 0x4>,
++ <0000 0 0 2 &gic 0 120 0x4>,
++ <0000 0 0 3 &gic 0 120 0x4>,
++ <0000 0 0 4 &gic 0 120 0x4>;
++ };
++
++ pcie@3600000 {
++ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
++ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 162 0x4>,
++ <0 161 0x4>;
++ interrupt-names = "intr", "pme";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ num-lanes = <2>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&msi3>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
++ <0000 0 0 2 &gic 0 154 0x4>,
++ <0000 0 0 3 &gic 0 154 0x4>,
++ <0000 0 0 4 &gic 0 154 0x4>;
++ };
++ };
++
++ fsl,dpaa {
++ compatible = "fsl,ls1046a-dpaa", "simple-bus", "fsl,dpaa";
++ ethernet@0 {
++ compatible = "fsl,dpa-ethernet";
++ fsl,fman-mac = <&fm1mac1>;
++ };
++ ethernet@1 {
++ compatible = "fsl,dpa-ethernet";
++ fsl,fman-mac = <&fm1mac2>;
++ };
++ ethernet@2 {
++ compatible = "fsl,dpa-ethernet";
++ fsl,fman-mac = <&fm1mac3>;
++ };
++ ethernet@3 {
++ compatible = "fsl,dpa-ethernet";
++ fsl,fman-mac = <&fm1mac4>;
++ };
++ ethernet@4 {
++ compatible = "fsl,dpa-ethernet";
++ fsl,fman-mac = <&fm1mac5>;
++ };
++ ethernet@5 {
++ compatible = "fsl,dpa-ethernet";
++ fsl,fman-mac = <&fm1mac6>;
++ };
++ ethernet@8 {
++ compatible = "fsl,dpa-ethernet";
++ fsl,fman-mac = <&fm1mac9>;
++ };
++ };
++
++ qportals: qman-portals@500000000 {
++ ranges = <0x0 0x5 0x00000000 0x8000000>;
++ };
++ bportals: bman-portals@508000000 {
++ ranges = <0x0 0x5 0x08000000 0x8000000>;
++ };
++ reserved-memory {
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++
++ bman_fbpr: bman-fbpr {
++ size = <0 0x1000000>;
++ alignment = <0 0x1000000>;
++ };
++ qman_fqd: qman-fqd {
++ size = <0 0x800000>;
++ alignment = <0 0x800000>;
++ };
++ qman_pfdr: qman-pfdr {
++ size = <0 0x2000000>;
++ alignment = <0 0x2000000>;
++ };
++ };
++};
++
++&fman0 {
++ /* offline - 1 */
++ port@82000 {
++ fsl,qman-channel-id = <0x809>;
++ };
++
++ /* tx - 10g - 2 */
++ port@a8000 {
++ fsl,qman-channel-id = <0x802>;
++ };
++ /* tx - 10g - 3 */
++ port@a9000 {
++ fsl,qman-channel-id = <0x803>;
++ };
++ /* tx - 1g - 2 */
++ port@aa000 {
++ fsl,qman-channel-id = <0x804>;
++ };
++ /* tx - 1g - 3 */
++ port@ab000 {
++ fsl,qman-channel-id = <0x805>;
++ };
++ /* tx - 1g - 4 */
++ port@ac000 {
++ fsl,qman-channel-id = <0x806>;
++ };
++ /* tx - 1g - 5 */
++ port@ad000 {
++ fsl,qman-channel-id = <0x807>;
++ };
++ /* tx - 10g - 0 */
++ port@b0000 {
++ fsl,qman-channel-id = <0x800>;
++ };
++ /* tx - 10g - 1 */
++ port@b1000 {
++ fsl,qman-channel-id = <0x801>;
++ };
++ /* offline - 2 */
++ port@83000 {
++ fsl,qman-channel-id = <0x80a>;
++ };
++ /* offline - 3 */
++ port@84000 {
++ fsl,qman-channel-id = <0x80b>;
++ };
++ /* offline - 4 */
++ port@85000 {
++ fsl,qman-channel-id = <0x80c>;
++ };
++ /* offline - 5 */
++ port@86000 {
++ fsl,qman-channel-id = <0x80d>;
++ };
++ /* offline - 6 */
++ port@87000 {
++ fsl,qman-channel-id = <0x80e>;
++ };
++};
++
++&bman_fbpr {
++ compatible = "fsl,bman-fbpr";
++ alloc-ranges = <0 0 0x10000 0>;
++};
++
++&qman_fqd {
++ compatible = "fsl,qman-fqd";
++ alloc-ranges = <0 0 0x10000 0>;
++};
++
++&qman_pfdr {
++ compatible = "fsl,qman-pfdr";
++ alloc-ranges = <0 0 0x10000 0>;
++};
++
++/include/ "qoriq-qman1-portals.dtsi"
++/include/ "qoriq-bman1-portals.dtsi"
diff --git a/target/linux/layerscape/patches-4.4/3132-dts-ls1046a-add-LS1046ARDB-board-support.patch b/target/linux/layerscape/patches-4.4/3132-dts-ls1046a-add-LS1046ARDB-board-support.patch
new file mode 100644
index 0000000..77b53d7
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/3132-dts-ls1046a-add-LS1046ARDB-board-support.patch
@@ -0,0 +1,557 @@
+From feb12cb699adbac2d4619401c7ff4fcc2fc97b6c Mon Sep 17 00:00:00 2001
+From: Mingkai Hu <mingkai.hu@nxp.com>
+Date: Mon, 26 Sep 2016 12:33:42 +0800
+Subject: [PATCH 132/141] dts/ls1046a: add LS1046ARDB board support
+
+commit e95a28cfd9a392fe5dc189a9ae097bbaaccd1228
+[context adjustment]
+
+Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
+Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ arch/arm64/boot/dts/freescale/Makefile | 1 +
+ arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 198 +++++++++++++++++++++
+ arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 178 +++++++++++++-----
+ 3 files changed, 328 insertions(+), 49 deletions(-)
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+
+--- a/arch/arm64/boot/dts/freescale/Makefile
++++ b/arch/arm64/boot/dts/freescale/Makefile
+@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+
+ always := $(dtb-y)
+ subdir-y := $(dts-dirs)
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+@@ -0,0 +1,198 @@
++/*
++ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
++ *
++ * Copyright 2016, Freescale Semiconductor
++ *
++ * Mingkai Hu <mingkai.hu@nxp.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPLv2 or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This library is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This library is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "fsl-ls1046a.dtsi"
++
++/ {
++ model = "LS1046A RDB Board";
++ compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
++
++ aliases {
++ ethernet0 = &fm1mac3;
++ ethernet1 = &fm1mac4;
++ ethernet2 = &fm1mac5;
++ ethernet3 = &fm1mac6;
++ ethernet4 = &fm1mac9;
++ ethernet5 = &fm1mac10;
++ };
++};
++
++&i2c0 {
++ status = "okay";
++ ina220@40 {
++ compatible = "ti,ina220";
++ reg = <0x40>;
++ shunt-resistor = <1000>;
++ };
++ adt7461a@4c {
++ compatible = "adi,adt7461";
++ reg = <0x4c>;
++ };
++ eeprom@56 {
++ compatible = "at24,24c512";
++ reg = <0x52>;
++ };
++ eeprom@57 {
++ compatible = "at24,24c512";
++ reg = <0x53>;
++ };
++};
++
++&i2c3 {
++ status = "okay";
++ rtc@51 {
++ compatible = "nxp,pcf2129";
++ reg = <0x51>;
++ };
++};
++
++&ifc {
++ status = "okay";
++ #address-cells = <2>;
++ #size-cells = <1>;
++ /* NAND Flashe and CPLD on board */
++ ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
++ 0x2 0x0 0x0 0x7fb00000 0x00000100>;
++
++ nand@0,0 {
++ compatible = "fsl,ifc-nand";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ reg = <0x0 0x0 0x10000>;
++ };
++
++ cpld: board-control@2,0 {
++ compatible = "fsl,ls1046ardb-cpld";
++ reg = <0x2 0x0 0x0000100>;
++ };
++};
++
++&qspi {
++ num-cs = <2>;
++ bus-num = <0>;
++ status = "okay";
++
++ qflash0: s25fs128s@0 {
++ compatible = "spansion,m25p80";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ spi-max-frequency = <20000000>;
++ reg = <0>;
++ };
++
++ qflash1: s25fs128s@1 {
++ compatible = "spansion,m25p80";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ spi-max-frequency = <20000000>;
++ reg = <1>;
++ };
++
++};
++
++&duart0 {
++ status = "okay";
++};
++
++&duart1 {
++ status = "okay";
++};
++
++&fman0 {
++ ethernet@e4000 {
++ phy-handle = <&rgmii_phy1>;
++ phy-connection-type = "rgmii";
++ };
++
++ ethernet@e6000 {
++ phy-handle = <&rgmii_phy2>;
++ phy-connection-type = "rgmii";
++ };
++
++ ethernet@e8000 {
++ phy-handle = <&sgmii_phy1>;
++ phy-connection-type = "sgmii";
++ };
++
++ ethernet@ea000 {
++ phy-handle = <&sgmii_phy2>;
++ phy-connection-type = "sgmii";
++ };
++
++ ethernet@f0000 { /* 10GEC1 */
++ phy-handle = <&aqr106_phy>;
++ phy-connection-type = "xgmii";
++ };
++
++ ethernet@f2000 { /* 10GEC2 */
++ fixed-link = <0 1 10000 0 0>;
++ phy-connection-type = "xgmii";
++ };
++
++ mdio@fc000 {
++ rgmii_phy1: ethernet-phy@1 {
++ reg = <0x1>;
++ };
++ rgmii_phy2: ethernet-phy@2 {
++ reg = <0x2>;
++ };
++ sgmii_phy1: ethernet-phy@3 {
++ reg = <0x3>;
++ };
++ sgmii_phy2: ethernet-phy@4 {
++ reg = <0x4>;
++ };
++ };
++
++ mdio@fd000 {
++ aqr106_phy: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c45";
++ interrupts = <0 131 4>;
++ reg = <0x0>;
++ };
++ };
++};
+--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
++++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+@@ -51,13 +51,7 @@
+ #size-cells = <2>;
+
+ aliases {
+- ethernet0 = &fm1mac1;
+- ethernet1 = &fm1mac2;
+- ethernet2 = &fm1mac3;
+- ethernet3 = &fm1mac4;
+- ethernet4 = &fm1mac5;
+- ethernet5 = &fm1mac6;
+- ethernet6 = &fm1mac9;
++ crypto = &crypto;
+ };
+
+ cpus {
+@@ -70,6 +64,7 @@
+ reg = <0x0>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&l2>;
++ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu1: cpu@1 {
+@@ -78,6 +73,7 @@
+ reg = <0x1>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&l2>;
++ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu2: cpu@2 {
+@@ -86,6 +82,7 @@
+ reg = <0x2>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&l2>;
++ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu3: cpu@3 {
+@@ -94,6 +91,7 @@
+ reg = <0x3>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&l2>;
++ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ l2: l2-cache {
+@@ -101,6 +99,19 @@
+ };
+ };
+
++ idle-states {
++ entry-method = "arm,psci";
++
++ CPU_PH20: cpu-ph20 {
++ compatible = "arm,idle-state";
++ idle-state-name = "PH20";
++ arm,psci-suspend-param = <0x00010000>;
++ entry-latency-us = <1000>;
++ exit-latency-us = <1000>;
++ min-residency-us = <3000>;
++ };
++ };
++
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0 0x80000000>;
+@@ -193,6 +204,49 @@
+ bus-width = <4>;
+ };
+
++ crypto: crypto@1700000 {
++ compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
++ "fsl,sec-v4.0";
++ fsl,sec-era = <8>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x00 0x1700000 0x100000>;
++ reg = <0x00 0x1700000 0x0 0x100000>;
++ interrupts = <0 75 0x4>;
++
++ sec_jr0: jr@10000 {
++ compatible = "fsl,sec-v5.4-job-ring",
++ "fsl,sec-v5.0-job-ring",
++ "fsl,sec-v4.0-job-ring";
++ reg = <0x10000 0x10000>;
++ interrupts = <0 71 0x4>;
++ };
++
++ sec_jr1: jr@20000 {
++ compatible = "fsl,sec-v5.4-job-ring",
++ "fsl,sec-v5.0-job-ring",
++ "fsl,sec-v4.0-job-ring";
++ reg = <0x20000 0x10000>;
++ interrupts = <0 72 0x4>;
++ };
++
++ sec_jr2: jr@30000 {
++ compatible = "fsl,sec-v5.4-job-ring",
++ "fsl,sec-v5.0-job-ring",
++ "fsl,sec-v4.0-job-ring";
++ reg = <0x30000 0x10000>;
++ interrupts = <0 73 0x4>;
++ };
++
++ sec_jr3: jr@40000 {
++ compatible = "fsl,sec-v5.4-job-ring",
++ "fsl,sec-v5.0-job-ring",
++ "fsl,sec-v4.0-job-ring";
++ reg = <0x40000 0x10000>;
++ interrupts = <0 74 0x4>;
++ };
++ };
++
+ qman: qman@1880000 {
+ compatible = "fsl,qman";
+ reg = <0x00 0x1880000 0x0 0x10000>;
+@@ -490,6 +544,19 @@
+ fsl,qman-channel-id = <0x800>;
+ };
+
++ fman0_10g_rx1: port@91000 {
++ cell-index = <1>;
++ compatible = "fsl,fman-port-10g-rx";
++ reg = <0x91000 0x1000>;
++ };
++
++ fman0_10g_tx1: port@b1000 {
++ cell-index = <1>;
++ compatible = "fsl,fman-port-10g-tx";
++ reg = <0xb1000 0x1000>;
++ fsl,qman-channel-id = <0x801>;
++ };
++
+ fm1mac9: ethernet@f0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-memac";
+@@ -497,6 +564,13 @@
+ fsl,port-handles = <&fman0_10g_rx0 &fman0_10g_tx0>;
+ };
+
++ fm1mac10: ethernet@f2000 {
++ cell-index = <1>;
++ compatible = "fsl,fman-memac";
++ reg = <0xf2000 0x1000>;
++ fsl,port-handles = <&fman0_10g_rx1 &fman0_10g_tx1>;
++ };
++
+ mdio@f1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+@@ -504,6 +578,13 @@
+ reg = <0xf1000 0x1000>;
+ };
+
++ mdio@f3000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0xf3000 0x1000>;
++ };
++
+ ptp_timer0: rtc@fe000 {
+ compatible = "fsl,fman-rtc";
+ reg = <0xfe000 0x1000>;
+@@ -657,7 +738,7 @@
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2950000 0x0 0x1000>;
+ interrupts = <0 48 0x4>;
+- clocks = <&clockgen 0 0>;
++ clocks = <&clockgen 4 0>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+@@ -712,7 +793,7 @@
+ reg = <0x0 0x29d0000 0x0 0x10000>;
+ interrupts = <0 86 0x4>;
+ big-endian;
+- rcpm-wakeup = <&rcpm 0x0 0x20000000>;
++ rcpm-wakeup = <&rcpm 0x00020000 0x0>;
+ status = "okay";
+ };
+
+@@ -789,34 +870,34 @@
+ big-endian;
+ };
+
+- msi1: msi-controller@1580000 {
+- compatible = "fsl,1s1046a-msi";
+- reg = <0x0 0x1580000 0x0 0x10000>;
++ msi: msi-controller@1580000 {
++ compatible = "fsl,ls1046a-msi";
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
+ msi-controller;
+- interrupts = <0 116 0x4>,
+- <0 111 0x4>,
+- <0 112 0x4>,
+- <0 113 0x4>;
+- };
+
+- msi2: msi-controller@1590000 {
+- compatible = "fsl,1s1046a-msi";
+- reg = <0x0 0x1590000 0x0 0x10000>;
+- msi-controller;
+- interrupts = <0 126 0x4>,
+- <0 121 0x4>,
+- <0 122 0x4>,
+- <0 123 0x4>;
+- };
+-
+- msi3: msi-controller@15a0000 {
+- compatible = "fsl,1s1046a-msi";
+- reg = <0x0 0x15a0000 0x0 0x10000>;
+- msi-controller;
+- interrupts = <0 160 0x4>,
+- <0 155 0x4>,
+- <0 156 0x4>,
+- <0 157 0x4>;
++ msi-bank@1580000 {
++ reg = <0x0 0x1580000 0x0 0x10000>;
++ interrupts = <0 116 0x4>,
++ <0 111 0x4>,
++ <0 112 0x4>,
++ <0 113 0x4>;
++ };
++ msi-bank@1590000 {
++ reg = <0x0 0x1590000 0x0 0x10000>;
++ interrupts = <0 126 0x4>,
++ <0 121 0x4>,
++ <0 122 0x4>,
++ <0 123 0x4>;
++ };
++ msi-bank@15a0000 {
++ reg = <0x0 0x15a0000 0x0 0x10000>;
++ interrupts = <0 160 0x4>,
++ <0 155 0x4>,
++ <0 156 0x4>,
++ <0 157 0x4>;
++ };
+ };
+
+ pcie@3400000 {
+@@ -826,15 +907,16 @@
+ reg-names = "regs", "config";
+ interrupts = <0 118 0x4>, /* controller interrupt */
+ <0 117 0x4>; /* PME interrupt */
+- interrupt-names = "intr", "pme";
++ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
++ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+- msi-parent = <&msi1>;
++ msi-parent = <&msi>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
+@@ -850,15 +932,16 @@
+ reg-names = "regs", "config";
+ interrupts = <0 128 0x4>,
+ <0 127 0x4>;
+- interrupt-names = "intr", "pme";
++ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
++ dma-coherent;
+ num-lanes = <2>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+- msi-parent = <&msi2>;
++ msi-parent = <&msi>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 120 0x4>,
+@@ -874,15 +957,16 @@
+ reg-names = "regs", "config";
+ interrupts = <0 162 0x4>,
+ <0 161 0x4>;
+- interrupt-names = "intr", "pme";
++ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
++ dma-coherent;
+ num-lanes = <2>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+- msi-parent = <&msi3>;
++ msi-parent = <&msi>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
+@@ -894,14 +978,6 @@
+
+ fsl,dpaa {
+ compatible = "fsl,ls1046a-dpaa", "simple-bus", "fsl,dpaa";
+- ethernet@0 {
+- compatible = "fsl,dpa-ethernet";
+- fsl,fman-mac = <&fm1mac1>;
+- };
+- ethernet@1 {
+- compatible = "fsl,dpa-ethernet";
+- fsl,fman-mac = <&fm1mac2>;
+- };
+ ethernet@2 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&fm1mac3>;
+@@ -922,6 +998,10 @@
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&fm1mac9>;
+ };
++ ethernet@9 {
++ compatible = "fsl,dpa-ethernet";
++ fsl,fman-mac = <&fm1mac10>;
++ };
+ };
+
+ qportals: qman-portals@500000000 {
diff --git a/target/linux/layerscape/patches-4.4/3133-ls1046ardb-add-ITS-file.patch b/target/linux/layerscape/patches-4.4/3133-ls1046ardb-add-ITS-file.patch
new file mode 100644
index 0000000..7461b92
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/3133-ls1046ardb-add-ITS-file.patch
@@ -0,0 +1,69 @@
+From 1a831d848c88f1bb9e599abc641a201be6b03ef7 Mon Sep 17 00:00:00 2001
+From: Mingkai Hu <mingkai.hu@nxp.com>
+Date: Mon, 18 Apr 2016 15:38:24 +0800
+Subject: [PATCH 133/141] ls1046ardb: add ITS file
+
+Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
+---
+ kernel-ls1046a-rdb.its | 55 ++++++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 55 insertions(+)
+ create mode 100644 kernel-ls1046a-rdb.its
+
+--- /dev/null
++++ b/kernel-ls1046a-rdb.its
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2016, Freescale Semiconductor
++ *
++ * Mingkai Hu <mingkai.hu@nxp.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++/ {
++ description = "Image file for the LS1046A Linux Kernel";
++ #address-cells = <1>;
++
++ images {
++ kernel@1 {
++ description = "ARM64 Linux kernel";
++ data = /incbin/("./arch/arm64/boot/Image.gz");
++ type = "kernel";
++ arch = "arm64";
++ os = "linux";
++ compression = "gzip";
++ load = <0x80080000>;
++ entry = <0x80080000>;
++ };
++ fdt@1 {
++ description = "Flattened Device Tree blob";
++ data = /incbin/("./arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb");
++ type = "flat_dt";
++ arch = "arm64";
++ compression = "none";
++ load = <0x90000000>;
++ };
++ ramdisk@1 {
++ description = "LS1046 Ramdisk";
++ data = /incbin/("./fsl-image-core-ls1046ardb-be.ext2.gz");
++ type = "ramdisk";
++ arch = "arm64";
++ os = "linux";
++ compression = "gzip";
++ };
++ };
++
++ configurations {
++ default = "config@1";
++ config@1 {
++ description = "Boot Linux kernel";
++ kernel = "kernel@1";
++ fdt = "fdt@1";
++ ramdisk = "ramdisk@1";
++ };
++ };
++};
diff --git a/target/linux/layerscape/patches-4.4/3143-armv8-aarch32-Execute-32-bit-Linux-for-ls1046a.patch b/target/linux/layerscape/patches-4.4/3143-armv8-aarch32-Execute-32-bit-Linux-for-ls1046a.patch
new file mode 100644
index 0000000..fc50e98
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/3143-armv8-aarch32-Execute-32-bit-Linux-for-ls1046a.patch
@@ -0,0 +1,32 @@
+From 887fd872791ce6e60045f4c6a97926365c6c817c Mon Sep 17 00:00:00 2001
+From: Yutang Jiang <yutang.jiang@nxp.com>
+Date: Wed, 7 Dec 2016 00:47:35 +0800
+Subject: [PATCH] armv8: aarch32: Execute 32-bit Linux for ls1046a
+
+Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
+---
+ arch/arm/mach-imx/mach-layerscape.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/mach-imx/mach-layerscape.c b/arch/arm/mach-imx/mach-layerscape.c
+index b87a90a..cbc541e 100644
+--- a/arch/arm/mach-imx/mach-layerscape.c
++++ b/arch/arm/mach-imx/mach-layerscape.c
+@@ -12,11 +12,13 @@
+ #include "common.h"
+
+ static const char * const layerscape_dt_compat[] __initconst = {
+- "fsl,ls1043a",
+ "fsl,ls1012a",
++ "fsl,ls1043a",
++ "fsl,ls1046a",
+ NULL,
+ };
+
+ DT_MACHINE_START(LAYERSCAPE, "Freescale LAYERSCAPE")
++ .smp = smp_ops(layerscape_smp_ops),
+ .dt_compat = layerscape_dt_compat,
+ MACHINE_END
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/7126-net-phy-add-driver-for-aquantia-AQR106-107-phy.patch b/target/linux/layerscape/patches-4.4/7126-net-phy-add-driver-for-aquantia-AQR106-107-phy.patch
new file mode 100644
index 0000000..474982c
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/7126-net-phy-add-driver-for-aquantia-AQR106-107-phy.patch
@@ -0,0 +1,63 @@
+From 637a6e183edf302111b28461c0c98b9634b30437 Mon Sep 17 00:00:00 2001
+From: Mingkai Hu <mingkai.hu@nxp.com>
+Date: Fri, 1 Apr 2016 17:11:10 +0800
+Subject: [PATCH 126/141] net: phy: add driver for aquantia AQR106/107 phy
+
+Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
+---
+ drivers/net/phy/aquantia.c | 30 ++++++++++++++++++++++++++++++
+ 1 file changed, 30 insertions(+)
+
+--- a/drivers/net/phy/aquantia.c
++++ b/drivers/net/phy/aquantia.c
+@@ -21,6 +21,8 @@
+ #define PHY_ID_AQ1202 0x03a1b445
+ #define PHY_ID_AQ2104 0x03a1b460
+ #define PHY_ID_AQR105 0x03a1b4a2
++#define PHY_ID_AQR106 0x03a1b4d0
++#define PHY_ID_AQR107 0x03a1b4e0
+ #define PHY_ID_AQR405 0x03a1b4b0
+
+ #define PHY_AQUANTIA_FEATURES (SUPPORTED_10000baseT_Full | \
+@@ -157,6 +159,32 @@ static struct phy_driver aquantia_driver
+ .driver = { .owner = THIS_MODULE,},
+ },
+ {
++ .phy_id = PHY_ID_AQR106,
++ .phy_id_mask = 0xfffffff0,
++ .name = "Aquantia AQR106",
++ .features = PHY_AQUANTIA_FEATURES,
++ .flags = PHY_HAS_INTERRUPT,
++ .aneg_done = aquantia_aneg_done,
++ .config_aneg = aquantia_config_aneg,
++ .config_intr = aquantia_config_intr,
++ .ack_interrupt = aquantia_ack_interrupt,
++ .read_status = aquantia_read_status,
++ .driver = { .owner = THIS_MODULE,},
++},
++{
++ .phy_id = PHY_ID_AQR107,
++ .phy_id_mask = 0xfffffff0,
++ .name = "Aquantia AQR107",
++ .features = PHY_AQUANTIA_FEATURES,
++ .flags = PHY_HAS_INTERRUPT,
++ .aneg_done = aquantia_aneg_done,
++ .config_aneg = aquantia_config_aneg,
++ .config_intr = aquantia_config_intr,
++ .ack_interrupt = aquantia_ack_interrupt,
++ .read_status = aquantia_read_status,
++ .driver = { .owner = THIS_MODULE,},
++},
++{
+ .phy_id = PHY_ID_AQR405,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Aquantia AQR405",
+@@ -177,6 +205,8 @@ static struct mdio_device_id __maybe_unu
+ { PHY_ID_AQ1202, 0xfffffff0 },
+ { PHY_ID_AQ2104, 0xfffffff0 },
+ { PHY_ID_AQR105, 0xfffffff0 },
++ { PHY_ID_AQR106, 0xfffffff0 },
++ { PHY_ID_AQR107, 0xfffffff0 },
+ { PHY_ID_AQR405, 0xfffffff0 },
+ { }
+ };
diff --git a/target/linux/layerscape/patches-4.4/8125-rtc-pcf2127-add-pcf2129-device-id.patch b/target/linux/layerscape/patches-4.4/8125-rtc-pcf2127-add-pcf2129-device-id.patch
new file mode 100644
index 0000000..6ece597
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8125-rtc-pcf2127-add-pcf2129-device-id.patch
@@ -0,0 +1,63 @@
+From 228d15f0c525d1d62540539ebb8d311feddb79f5 Mon Sep 17 00:00:00 2001
+From: Akinobu Mita <akinobu.mita@gmail.com>
+Date: Mon, 26 Sep 2016 11:26:11 +0800
+Subject: [PATCH 125/141] rtc: pcf2127: add pcf2129 device id
+
+commit e8bf83a7f9454ed1026f100139ebd10eace0e280
+[context adjustment]
+
+There are only a few differences between PCF2127 and PCF2129 (PCF2127
+has 512 bytes of general purpose SRAM and count-down timer).
+
+The rtc-pcf2127 driver currently doesn't use the PCF2127 specific
+functionality and Kconfig help text already says this driver supports
+PCF2127/29, so we can simply add pcf2129 to device id list.
+
+Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
+Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
+Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
+Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ drivers/rtc/rtc-pcf2127.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+--- a/drivers/rtc/rtc-pcf2127.c
++++ b/drivers/rtc/rtc-pcf2127.c
+@@ -1,12 +1,12 @@
+ /*
+- * An I2C driver for the NXP PCF2127 RTC
++ * An I2C and SPI driver for the NXP PCF2127/29 RTC
+ * Copyright 2013 Til-Technologies
+ *
+ * Author: Renaud Cerrato <r.cerrato@til-technologies.fr>
+ *
+ * based on the other drivers in this same directory.
+ *
+- * http://www.nxp.com/documents/data_sheet/PCF2127AT.pdf
++ * Datasheet: http://cache.nxp.com/documents/data_sheet/PCF2127.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+@@ -216,6 +216,7 @@ static int pcf2127_probe(struct i2c_clie
+
+ static const struct i2c_device_id pcf2127_id[] = {
+ { "pcf2127", 0 },
++ { "pcf2129", 0 },
+ { }
+ };
+ MODULE_DEVICE_TABLE(i2c, pcf2127_id);
+@@ -223,6 +224,7 @@ MODULE_DEVICE_TABLE(i2c, pcf2127_id);
+ #ifdef CONFIG_OF
+ static const struct of_device_id pcf2127_of_match[] = {
+ { .compatible = "nxp,pcf2127" },
++ { .compatible = "nxp,pcf2129" },
+ {}
+ };
+ MODULE_DEVICE_TABLE(of, pcf2127_of_match);
+@@ -240,5 +242,5 @@ static struct i2c_driver pcf2127_driver
+ module_i2c_driver(pcf2127_driver);
+
+ MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>");
+-MODULE_DESCRIPTION("NXP PCF2127 RTC driver");
++MODULE_DESCRIPTION("NXP PCF2127/29 RTC driver");
+ MODULE_LICENSE("GPL v2");
diff --git a/target/linux/layerscape/patches-4.4/8127-ls1046a-msi-Add-LS1046A-MSI-support.patch b/target/linux/layerscape/patches-4.4/8127-ls1046a-msi-Add-LS1046A-MSI-support.patch
new file mode 100644
index 0000000..a3850c7
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8127-ls1046a-msi-Add-LS1046A-MSI-support.patch
@@ -0,0 +1,25 @@
+From 51ab89c787184d47dbff37c3c69ea2c82cc4749c Mon Sep 17 00:00:00 2001
+From: Mingkai Hu <mingkai.hu@nxp.com>
+Date: Mon, 26 Sep 2016 12:13:56 +0800
+Subject: [PATCH 127/141] ls1046a/msi: Add LS1046A MSI support
+
+commit 2b5a00d46a8f8762b9f78b727eab6fc0e12f3fd7
+[context adjustment]
+
+Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
+Integated-by: Zhao Qiang <qiang.zhao@nxp.com>
+Integated-by: Yutang Jiang <yutang.jiang@nxp.com>
+---
+ drivers/irqchip/irq-ls-scfg-msi.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/irqchip/irq-ls-scfg-msi.c
++++ b/drivers/irqchip/irq-ls-scfg-msi.c
+@@ -222,6 +222,7 @@ static const struct of_device_id ls_scfg
+ { .compatible = "fsl,ls1012a-msi", },
+ { .compatible = "fsl,1s1021a-msi", },
+ { .compatible = "fsl,1s1043a-msi", },
++ { .compatible = "fsl,ls1046a-msi", },
+ {},
+ };
+
diff --git a/target/linux/layerscape/patches-4.4/8128-pci-layerscape-add-LS1046A-support.patch b/target/linux/layerscape/patches-4.4/8128-pci-layerscape-add-LS1046A-support.patch
new file mode 100644
index 0000000..0a9f296
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8128-pci-layerscape-add-LS1046A-support.patch
@@ -0,0 +1,38 @@
+From 5a95e58e58da417ca8a8f4ae11347ad9a66803cd Mon Sep 17 00:00:00 2001
+From: Mingkai Hu <mingkai.hu@nxp.com>
+Date: Mon, 26 Sep 2016 12:17:36 +0800
+Subject: [PATCH 128/141] pci/layerscape: add LS1046A support
+
+commit a52797fe443a79c53d0b63c505c99f65264de8b7
+[context adjustment]
+
+Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
+Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
+Integrated-by: Yutang Jiang <yutang.jiang@nxp.com>
+---
+ drivers/pci/host/pci-layerscape.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/drivers/pci/host/pci-layerscape.c
++++ b/drivers/pci/host/pci-layerscape.c
+@@ -205,6 +205,12 @@ static struct ls_pcie_drvdata ls1043_drv
+ .ops = &ls_pcie_host_ops,
+ };
+
++static struct ls_pcie_drvdata ls1046_drvdata = {
++ .lut_offset = 0x10000,
++ .ltssm_shift = 24,
++ .ops = &ls_pcie_host_ops,
++};
++
+ static struct ls_pcie_drvdata ls2080_drvdata = {
+ .lut_offset = 0x80000,
+ .ltssm_shift = 0,
+@@ -215,6 +221,7 @@ static const struct of_device_id ls_pcie
+ { .compatible = "fsl,ls1012a-pcie", .data = &ls1012_drvdata },
+ { .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata },
+ { .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata },
++ { .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata },
+ { .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
+ { .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
+ { },
diff --git a/target/linux/layerscape/patches-4.4/8129-clk-qoriq-add-ls1046a-support.patch b/target/linux/layerscape/patches-4.4/8129-clk-qoriq-add-ls1046a-support.patch
new file mode 100644
index 0000000..8dd5cdb
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8129-clk-qoriq-add-ls1046a-support.patch
@@ -0,0 +1,75 @@
+From 4fe33d4f4dc608fc5013390db58df06723282d01 Mon Sep 17 00:00:00 2001
+From: Mingkai Hu <mingkai.hu@nxp.com>
+Date: Thu, 2 Jun 2016 11:15:58 +0800
+Subject: [PATCH 129/141] clk: qoriq: add ls1046a support
+
+Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
+Integated-by: Yutang Jiang <yutang.jiang@nxp.com>
+---
+ drivers/clk/clk-qoriq.c | 41 +++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 41 insertions(+)
+
+--- a/drivers/clk/clk-qoriq.c
++++ b/drivers/clk/clk-qoriq.c
+@@ -275,6 +275,31 @@ static const struct clockgen_muxinfo ls1
+ },
+ };
+
++static const struct clockgen_muxinfo ls1046a_hwa1 = {
++ {
++ {},
++ {},
++ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
++ { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
++ { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
++ { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
++ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
++ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
++ },
++};
++
++static const struct clockgen_muxinfo ls1046a_hwa2 = {
++ {
++ {},
++ { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
++ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
++ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
++ {},
++ {},
++ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
++ },
++};
++
+ static const struct clockgen_muxinfo t1023_hwa1 = {
+ {
+ {},
+@@ -508,6 +533,21 @@ static const struct clockgen_chipinfo ch
+ .flags = CG_PLL_8BIT,
+ },
+ {
++ .compat = "fsl,ls1046a-clockgen",
++ .init_periph = t2080_init_periph,
++ .cmux_groups = {
++ &t1040_cmux
++ },
++ .hwaccel = {
++ &ls1046a_hwa1, &ls1046a_hwa2
++ },
++ .cmux_to_group = {
++ 0, -1
++ },
++ .pll_mask = 0x07,
++ .flags = CG_PLL_8BIT,
++ },
++ {
+ .compat = "fsl,ls2080a-clockgen",
+ .cmux_groups = {
+ &clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+@@ -1285,6 +1325,7 @@ CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qo
+ CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init);
+ CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init);
+ CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
++CLK_OF_DECLARE(qoriq_clockgen_ls1046a, "fsl,ls1046a-clockgen", clockgen_init);
+ CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
+ CLK_OF_DECLARE(qoriq_clockgen_ls1012a, "fsl,ls1012a-clockgen", clockgen_init);
+
diff --git a/target/linux/layerscape/patches-4.4/8130-ls1046a-sata-Add-LS1046A-sata-support.patch b/target/linux/layerscape/patches-4.4/8130-ls1046a-sata-Add-LS1046A-sata-support.patch
new file mode 100644
index 0000000..ea384e6
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8130-ls1046a-sata-Add-LS1046A-sata-support.patch
@@ -0,0 +1,53 @@
+From 5cd461cd17c3e27e5501e499d5d865b60ee58257 Mon Sep 17 00:00:00 2001
+From: Gong Qianyu <Qianyu.Gong@nxp.com>
+Date: Mon, 26 Sep 2016 12:29:24 +0800
+Subject: [PATCH 130/141] ls1046a/sata: Add LS1046A sata support
+
+Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
+Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
+Integated-by: Yutang Jiang <yutang.jiang@nxp.com>
+---
+ drivers/ata/ahci_qoriq.c | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/drivers/ata/ahci_qoriq.c
++++ b/drivers/ata/ahci_qoriq.c
+@@ -40,11 +40,16 @@
+ #define AHCI_PORT_PHY_5_CFG 0x192c96a4
+ #define AHCI_PORT_TRANS_CFG 0x08000025
+
++/* for ls1046a */
++#define LS1046A_PORT_PHY2 0x28184d1f
++#define LS1046A_PORT_PHY3 0x0e081509
++
+ #define SATA_ECC_DISABLE 0x00020000
+
+ enum ahci_qoriq_type {
+ AHCI_LS1021A,
+ AHCI_LS1043A,
++ AHCI_LS1046A,
+ AHCI_LS2080A,
+ };
+
+@@ -57,6 +62,7 @@ struct ahci_qoriq_priv {
+ static const struct of_device_id ahci_qoriq_of_match[] = {
+ { .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A},
+ { .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
++ { .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
+ { .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A},
+ {},
+ };
+@@ -158,6 +164,13 @@ static int ahci_qoriq_phy_init(struct ah
+ writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+ break;
+
++ case AHCI_LS1046A:
++ writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
++ writel(LS1046A_PORT_PHY2, reg_base + PORT_PHY2);
++ writel(LS1046A_PORT_PHY3, reg_base + PORT_PHY3);
++ writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
++ break;
++
+ case AHCI_LS1043A:
+ case AHCI_LS2080A:
+ writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
diff --git a/target/linux/layerscape/patches-4.4/8134-pci-layerscape-add-LUT-DBG-reigster-offset-member.patch b/target/linux/layerscape/patches-4.4/8134-pci-layerscape-add-LUT-DBG-reigster-offset-member.patch
new file mode 100644
index 0000000..4f7f515
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8134-pci-layerscape-add-LUT-DBG-reigster-offset-member.patch
@@ -0,0 +1,67 @@
+From 57d147c02fdcbae5e61ba322d51c5734f9511fd7 Mon Sep 17 00:00:00 2001
+From: Mingkai Hu <mingkai.hu@nxp.com>
+Date: Mon, 26 Sep 2016 14:19:32 +0800
+Subject: [PATCH 134/141] pci/layerscape: add LUT DBG reigster offset member
+
+commit 59ab37d6f46356a5b9755fcec74b23616dfdd62f
+[doesn't apply pm part]
+
+Different chip have different LUT debug register offset,
+so add a member to avoid macro redifinition.
+
+Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
+Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
+Integrated-by: Yutang Jiang <yutang.jiang@nxp.com>
+---
+ drivers/pci/host/pci-layerscape.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+--- a/drivers/pci/host/pci-layerscape.c
++++ b/drivers/pci/host/pci-layerscape.c
+@@ -41,6 +41,7 @@
+ struct ls_pcie_drvdata {
+ u32 lut_offset;
+ u32 ltssm_shift;
++ u32 lut_dbg;
+ struct pcie_host_ops *ops;
+ };
+
+@@ -134,7 +135,7 @@ static int ls_pcie_link_up(struct pcie_p
+ struct ls_pcie *pcie = to_ls_pcie(pp);
+ u32 state;
+
+- state = (ioread32(pcie->lut + PCIE_LUT_DBG) >>
++ state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >>
+ pcie->drvdata->ltssm_shift) &
+ LTSSM_STATE_MASK;
+
+@@ -196,24 +197,28 @@ static struct ls_pcie_drvdata ls1021_drvdata = {
+ static struct ls_pcie_drvdata ls1012_drvdata = {
+ .lut_offset = 0xC0000,
+ .ltssm_shift = 24,
++ .lut_dbg = 0x7fc,
+ .ops = &ls_pcie_host_ops,
+ };
+
+ static struct ls_pcie_drvdata ls1043_drvdata = {
+ .lut_offset = 0x10000,
+ .ltssm_shift = 24,
++ .lut_dbg = 0x7fc,
+ .ops = &ls_pcie_host_ops,
+ };
+
+ static struct ls_pcie_drvdata ls1046_drvdata = {
+- .lut_offset = 0x10000,
++ .lut_offset = 0x80000,
+ .ltssm_shift = 24,
++ .lut_dbg = 0x407fc,
+ .ops = &ls_pcie_host_ops,
+ };
+
+ static struct ls_pcie_drvdata ls2080_drvdata = {
+ .lut_offset = 0x80000,
+ .ltssm_shift = 0,
++ .lut_dbg = 0x7fc,
+ .ops = &ls_pcie_host_ops,
+ };
+
diff --git a/target/linux/layerscape/patches-4.4/8138-pci-layerscape-add-MSI-interrupt-support.patch b/target/linux/layerscape/patches-4.4/8138-pci-layerscape-add-MSI-interrupt-support.patch
new file mode 100644
index 0000000..fd597e5
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8138-pci-layerscape-add-MSI-interrupt-support.patch
@@ -0,0 +1,259 @@
+From b0e74277164b17bb0d207ffe16056e13e558f6ba Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Tue, 11 Oct 2016 16:25:07 +0800
+Subject: [PATCH 138/141] pci-layerscape: add MSI interrupt support
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ drivers/iommu/amd_iommu.c | 5 +++--
+ drivers/iommu/arm-smmu.c | 21 ++++++++++++++++++
+ drivers/iommu/iommu.c | 8 +++----
+ drivers/pci/host/pci-layerscape.c | 43 +++++++++++++++++++++++++++++++++++++
+ drivers/pci/host/pci-layerscape.h | 17 +++++++++++++++
+ drivers/pci/quirks.c | 19 +++++++++-------
+ drivers/pci/search.c | 5 ++---
+ include/linux/pci.h | 6 +++---
+ 8 files changed, 104 insertions(+), 20 deletions(-)
+ create mode 100644 drivers/pci/host/pci-layerscape.h
+
+--- a/drivers/iommu/amd_iommu.c
++++ b/drivers/iommu/amd_iommu.c
+@@ -222,8 +222,9 @@ static u16 get_alias(struct device *dev)
+ */
+ if (pci_alias == devid &&
+ PCI_BUS_NUM(ivrs_alias) == pdev->bus->number) {
+- pdev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN;
+- pdev->dma_alias_devfn = ivrs_alias & 0xff;
++ pdev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVID;
++ pdev->dma_alias_devid = PCI_DEVID(pdev->bus->number,
++ ivrs_alias & 0xff);
+ pr_info("AMD-Vi: Added PCI DMA alias %02x.%d for %s\n",
+ PCI_SLOT(ivrs_alias), PCI_FUNC(ivrs_alias),
+ dev_name(dev));
+--- a/drivers/iommu/arm-smmu.c
++++ b/drivers/iommu/arm-smmu.c
+@@ -45,6 +45,10 @@
+
+ #include <linux/amba/bus.h>
+
++#ifdef CONFIG_PCI_LAYERSCAPE
++#include <../drivers/pci/host/pci-layerscape.h>
++#endif
++
+ #include "io-pgtable.h"
+
+ /* Maximum number of stream IDs assigned to a single device */
+@@ -1352,6 +1356,23 @@ static int arm_smmu_init_platform_device
+ static int arm_smmu_add_device(struct device *dev)
+ {
+ struct iommu_group *group;
++#ifdef CONFIG_PCI_LAYERSCAPE
++ u16 sid;
++ u32 streamid;
++ struct pci_dev *pdev;
++ if (dev_is_pci(dev)) {
++ pdev = to_pci_dev(dev);
++
++ pci_for_each_dma_alias(pdev, __arm_smmu_get_pci_sid, &sid);
++ streamid = set_pcie_streamid_translation(pdev, sid);
++ if (~streamid == 0) {
++ return -ENODEV;
++ }
++
++ pdev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVID;
++ pdev->dma_alias_devid = streamid;
++ }
++#endif
+
+ group = iommu_group_get_for_dev(dev);
+ if (IS_ERR(group))
+--- a/drivers/iommu/iommu.c
++++ b/drivers/iommu/iommu.c
+@@ -686,10 +686,10 @@ static struct iommu_group *get_pci_alias
+ continue;
+
+ /* We alias them or they alias us */
+- if (((pdev->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVFN) &&
+- pdev->dma_alias_devfn == tmp->devfn) ||
+- ((tmp->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVFN) &&
+- tmp->dma_alias_devfn == pdev->devfn)) {
++ if (((pdev->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVID) &&
++ (pdev->dma_alias_devid & 0xff) == tmp->devfn) ||
++ ((tmp->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVID) &&
++ (tmp->dma_alias_devid & 0xff) == pdev->devfn)) {
+
+ group = get_pci_alias_group(tmp, devfns);
+ if (group) {
+--- a/drivers/pci/host/pci-layerscape.c
++++ b/drivers/pci/host/pci-layerscape.c
+@@ -37,6 +37,11 @@
+
+ /* PEX LUT registers */
+ #define PCIE_LUT_DBG 0x7FC /* PEX LUT Debug Register */
++#define PCIE_LUT_UDR(n) (0x800 + (n) * 8)
++#define PCIE_LUT_LDR(n) (0x804 + (n) * 8)
++#define PCIE_LUT_MASK_ALL 0xffff
++#define PCIE_LUT_DR_NUM 32
++#define PCIE_LUT_ENABLE (1 << 31)
+
+ struct ls_pcie_drvdata {
+ u32 lut_offset;
+@@ -52,10 +57,30 @@ struct ls_pcie {
+ struct pcie_port pp;
+ const struct ls_pcie_drvdata *drvdata;
+ int index;
++ const u32 *avail_streamids;
++ int streamid_index;
+ };
+
+ #define to_ls_pcie(x) container_of(x, struct ls_pcie, pp)
+
++u32 set_pcie_streamid_translation(struct pci_dev *pdev, u32 devid)
++{
++ u32 index, streamid;
++ struct pcie_port *pp = pdev->bus->sysdata;
++ struct ls_pcie *pcie = to_ls_pcie(pp);
++
++ if (!pcie->avail_streamids || !pcie->streamid_index)
++ return ~(u32)0;
++
++ index = --pcie->streamid_index;
++ /* mask is set as all zeroes, want to match all bits */
++ iowrite32((devid << 16), pcie->lut + PCIE_LUT_UDR(index));
++ streamid = be32_to_cpup(&pcie->avail_streamids[index]);
++ iowrite32(streamid | PCIE_LUT_ENABLE, pcie->lut + PCIE_LUT_LDR(index));
++
++ return streamid;
++}
++
+ static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
+ {
+ u32 header_type;
+@@ -283,10 +308,28 @@ static int __init ls_pcie_probe(struct p
+
+ pcie->drvdata = match->data;
+ pcie->lut = pcie->dbi + pcie->drvdata->lut_offset;
++ /* Disable LDR zero */
++ iowrite32(0, pcie->lut + PCIE_LUT_LDR(0));
+
+ if (!ls_pcie_is_bridge(pcie))
+ return -ENODEV;
+
++ if (of_device_is_compatible(pdev->dev.of_node, "fsl,ls2085a-pcie") ||
++ of_device_is_compatible(pdev->dev.of_node, "fsl,ls2080a-pcie") ||
++ of_device_is_compatible(pdev->dev.of_node, "fsl,ls1088a-pcie")) {
++ int len;
++ const u32 *prop;
++ struct device_node *np;
++
++ np = pdev->dev.of_node;
++ prop = (u32 *)of_get_property(np, "available-stream-ids", &len);
++ if (prop) {
++ pcie->avail_streamids = prop;
++ pcie->streamid_index = len/sizeof(u32);
++ } else
++ dev_err(&pdev->dev, "PCIe endpoint partitioning not possible\n");
++ }
++
+ ret = ls_add_pcie_port(&pcie->pp, pdev);
+ if (ret < 0)
+ return ret;
+--- /dev/null
++++ b/drivers/pci/host/pci-layerscape.h
+@@ -0,0 +1,17 @@
++/*
++ * Copyright (C) 2015 Freescale Semiconductor.
++ *
++ * Author: Varun Sethi <Varun.Sethi@freescale.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _PCI_LAYERSCAPE_H
++#define _PCI_LAYERSCAPE_H
++
++/* function for setting up stream id to device id translation */
++u32 set_pcie_streamid_translation(struct pci_dev *pdev, u32 devid);
++
++#endif /* _PCI_LAYERSCAPE_H */
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -3589,8 +3589,9 @@ int pci_dev_specific_reset(struct pci_de
+ static void quirk_dma_func0_alias(struct pci_dev *dev)
+ {
+ if (PCI_FUNC(dev->devfn) != 0) {
+- dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
+- dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN;
++ dev->dma_alias_devid = PCI_DEVID(dev->bus->number,
++ PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
++ dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVID;
+ }
+ }
+
+@@ -3605,8 +3606,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_R
+ static void quirk_dma_func1_alias(struct pci_dev *dev)
+ {
+ if (PCI_FUNC(dev->devfn) != 1) {
+- dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 1);
+- dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN;
++ dev->dma_alias_devid = PCI_DEVID(dev->bus->number,
++ PCI_DEVFN(PCI_SLOT(dev->devfn), 1));
++ dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVID;
+ }
+ }
+
+@@ -3670,11 +3672,12 @@ static void quirk_fixed_dma_alias(struct
+
+ id = pci_match_id(fixed_dma_alias_tbl, dev);
+ if (id) {
+- dev->dma_alias_devfn = id->driver_data;
+- dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN;
++ dev->dma_alias_devid = PCI_DEVID(dev->bus->number,
++ id->driver_data);
++ dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVID;
+ dev_info(&dev->dev, "Enabling fixed DMA alias to %02x.%d\n",
+- PCI_SLOT(dev->dma_alias_devfn),
+- PCI_FUNC(dev->dma_alias_devfn));
++ PCI_SLOT(dev->dma_alias_devid),
++ PCI_FUNC(dev->dma_alias_devid));
+ }
+ }
+
+--- a/drivers/pci/search.c
++++ b/drivers/pci/search.c
+@@ -40,9 +40,8 @@ int pci_for_each_dma_alias(struct pci_de
+ * If the device is broken and uses an alias requester ID for
+ * DMA, iterate over that too.
+ */
+- if (unlikely(pdev->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVFN)) {
+- ret = fn(pdev, PCI_DEVID(pdev->bus->number,
+- pdev->dma_alias_devfn), data);
++ if (unlikely(pdev->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVID)) {
++ ret = fn(pdev, pdev->dma_alias_devid, data);
+ if (ret)
+ return ret;
+ }
+--- a/include/linux/pci.h
++++ b/include/linux/pci.h
+@@ -172,8 +172,8 @@ enum pci_dev_flags {
+ PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) (1 << 2),
+ /* Flag for quirk use to store if quirk-specific ACS is enabled */
+ PCI_DEV_FLAGS_ACS_ENABLED_QUIRK = (__force pci_dev_flags_t) (1 << 3),
+- /* Flag to indicate the device uses dma_alias_devfn */
+- PCI_DEV_FLAGS_DMA_ALIAS_DEVFN = (__force pci_dev_flags_t) (1 << 4),
++ /* Flag to indicate the device uses dma_alias_devid */
++ PCI_DEV_FLAGS_DMA_ALIAS_DEVID = (__force pci_dev_flags_t) (1 << 4),
+ /* Use a PCIe-to-PCI bridge alias even if !pci_is_pcie */
+ PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS = (__force pci_dev_flags_t) (1 << 5),
+ /* Do not use bus resets for device */
+@@ -279,7 +279,7 @@ struct pci_dev {
+ u8 rom_base_reg; /* which config register controls the ROM */
+ u8 pin; /* which interrupt pin this device uses */
+ u16 pcie_flags_reg; /* cached PCIe Capabilities Register */
+- u8 dma_alias_devfn;/* devfn of DMA alias, if any */
++ u32 dma_alias_devid;/* devid of DMA alias */
+
+ struct pci_driver *driver; /* which driver has allocated this device */
+ u64 dma_mask; /* Mask of the bits of bus address this
diff --git a/target/linux/layerscape/patches-4.4/8142-drivers-mmc-Add-compatible-string-for-LS1046A.patch b/target/linux/layerscape/patches-4.4/8142-drivers-mmc-Add-compatible-string-for-LS1046A.patch
new file mode 100644
index 0000000..d86de8b
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8142-drivers-mmc-Add-compatible-string-for-LS1046A.patch
@@ -0,0 +1,25 @@
+From 81c67bb120106c4fbd9b7191ab057b48e13e3e5e Mon Sep 17 00:00:00 2001
+From: Yutang Jiang <yutang.jiang@nxp.com>
+Date: Tue, 8 Nov 2016 01:27:50 +0800
+Subject: [PATCH 142/142] drivers/mmc: Add compatible string for LS1046A
+
+Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
+---
+ drivers/mmc/host/sdhci-of-esdhc.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
+index a04ed4e..1116d38 100644
+--- a/drivers/mmc/host/sdhci-of-esdhc.c
++++ b/drivers/mmc/host/sdhci-of-esdhc.c
+@@ -607,6 +607,7 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
+ of_device_is_compatible(np, "fsl,p4080-esdhc") ||
+ of_device_is_compatible(np, "fsl,p1020-esdhc") ||
+ of_device_is_compatible(np, "fsl,t1040-esdhc") ||
++ of_device_is_compatible(np, "fsl,ls1046a-esdhc") ||
+ of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
+ host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+--
+1.7.9.5
+