finally move buildroot-ng to trunk

4 files changed, 1702 insertions, 0 deletions

diff --git a/target/linux/magicbox-2.6/Makefile b/target/linux/magicbox-2.6/Makefile
new file mode 100644
index 0000000..7ffd11c
--- /dev/null
+++ b/target/linux/magicbox-2.6/Makefile
@@ -0,0 +1,22 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+LINUX_VERSION:=2.6.17
+LINUX_RELEASE:=1
+LINUX_KERNEL_MD5SUM:=37ddefe96625502161f075b9d907f21e
+
+include ./config
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/kernel-build.mk
+
+$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
+	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
+	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
+	@$(CP) config $(LINUX_DIR)/.config
+	touch $@
+
diff --git a/target/linux/magicbox-2.6/config b/target/linux/magicbox-2.6/config
new file mode 100644
index 0000000..1f7f591
--- /dev/null
+++ b/target/linux/magicbox-2.6/config
@@ -0,0 +1,1161 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Wed Aug 30 06:45:18 2006
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_4xx=y
+CONFIG_WANT_EARLY_SERIAL=y
+
+#
+# IBM 4xx options
+#
+# CONFIG_BUBINGA is not set
+# CONFIG_CPCI405 is not set
+# CONFIG_EP405 is not set
+# CONFIG_REDWOOD_5 is not set
+# CONFIG_REDWOOD_6 is not set
+# CONFIG_SYCAMORE is not set
+# CONFIG_WALNUT is not set
+CONFIG_MAGICBOX=y
+# CONFIG_XILINX_ML300 is not set
+# CONFIG_XILINX_ML403 is not set
+CONFIG_IBM_OCP=y
+CONFIG_BIOS_FIXUP=y
+CONFIG_405EP=y
+CONFIG_PPC4xx_DMA=y
+CONFIG_PPC4xx_EDMA=y
+CONFIG_PPC_GEN550=y
+CONFIG_UART0_TTYS0=y
+# CONFIG_UART0_TTYS1 is not set
+CONFIG_NOT_COHERENT_CACHE=y
+
+#
+# Platform options
+#
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IPSEC_NAT_TRAVERSAL is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=y
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
+CONFIG_IP_NF_QUEUE=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_IPP2P=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_TIME=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_MATCH_LAYER7=m
+# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_IMQ=m
+# CONFIG_IP_NF_TARGET_LOG is not set
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=y
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_IP_NF_TARGET_ROUTE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=y
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_TTL=m
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+CONFIG_IP_NF_SET=m
+CONFIG_IP_NF_SET_MAX=256
+CONFIG_IP_NF_SET_HASHSIZE=1024
+CONFIG_IP_NF_SET_IPMAP=m
+CONFIG_IP_NF_SET_MACIPMAP=m
+CONFIG_IP_NF_SET_PORTMAP=m
+CONFIG_IP_NF_SET_IPHASH=m
+CONFIG_IP_NF_SET_NETHASH=m
+CONFIG_IP_NF_SET_IPTREE=m
+CONFIG_IP_NF_MATCH_SET=m
+CONFIG_IP_NF_TARGET_SET=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_ESFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_MAGICMAP=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_IMQ=m
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+CONFIG_IMQ_BEHAVIOR_BA=y
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+CONFIG_IMQ_NUM_DEVS=2
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=64
+CONFIG_IBM_EMAC_TXB=8
+CONFIG_IBM_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_EMAC_PHY_RX_CLK_FIX is not set
+# CONFIG_IBM_EMAC_DEBUG is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+CONFIG_NET_WIRELESS_RTNETLINK=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW_QOS is not set
+# CONFIG_IPW2200_DEBUG is not set
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+CONFIG_PRISM54=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_HOSTAP_PLX is not set
+CONFIG_HOSTAP_PCI=m
+# CONFIG_BCM43XX is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_BOOKE_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# IBM 40x options
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+CONFIG_PPC_OCP=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/target/linux/magicbox-2.6/patches/001-magicbox_support.patch b/target/linux/magicbox-2.6/patches/001-magicbox_support.patch
new file mode 100644
index 0000000..b7806da
--- /dev/null
+++ b/target/linux/magicbox-2.6/patches/001-magicbox_support.patch
@@ -0,0 +1,372 @@
+diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/Kconfig linux-2.6.17-owrt/arch/ppc/platforms/4xx/Kconfig
+--- linux-2.6.17/arch/ppc/platforms/4xx/Kconfig	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/Kconfig	2006-08-25 23:33:05.000000000 +0200
+@@ -52,6 +52,12 @@
+ 	help
+ 	  This option enables support for the IBM PPC405GP evaluation board.
+ 
++config MAGICBOX
++	bool "MagicBox"
++	select WANT_EARLY_SERIAL
++	help
++	  This option enables support for the IBM PPC405EP evaluation board.
++
+ config XILINX_ML300
+ 	bool "Xilinx-ML300"
+ 	help
+@@ -173,7 +179,7 @@
+ 
+ config IBM_OCP
+ 	bool
+-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
++	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT || MAGICBOX
+ 	default y
+ 
+ config IBM_EMAC4
+@@ -183,7 +189,7 @@
+ 
+ config BIOS_FIXUP
+ 	bool
+-	depends on BUBINGA || EP405 || SYCAMORE || WALNUT
++	depends on BUBINGA || EP405 || SYCAMORE || WALNUT || MAGICBOX
+ 	default y
+ 
+ # OAK doesn't exist but wanted to keep this around for any future 403GCX boards
+@@ -194,7 +200,7 @@
+ 
+ config 405EP
+ 	bool
+-	depends on BUBINGA
++	depends on BUBINGA || MAGICBOX
+ 	default y
+ 
+ config 405GP
+diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/magicbox.c linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.c
+--- linux-2.6.17/arch/ppc/platforms/4xx/magicbox.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.c	2006-08-25 23:33:05.000000000 +0200
+@@ -0,0 +1,249 @@
++/*
++ * Support for IBM PPC 405EP-based MagicBox board 
++ * Copyright (C) 2006  Karol Lewandowski
++ *
++ * Heavily based on bubinga.c
++ *
++ * Author: SAW (IBM), derived from walnut.c.
++ *         Maintained by MontaVista Software <source@mvista.com>
++ *
++ * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
++ * terms of the GNU General Public License version 2. This program is
++ * licensed "as is" without any warranty of any kind, whether express
++ * or implied.
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/smp.h>
++#include <linux/threads.h>
++#include <linux/param.h>
++#include <linux/string.h>
++#include <linux/blkdev.h>
++#include <linux/pci.h>
++#include <linux/tty.h>
++#include <linux/serial.h>
++#include <linux/serial_core.h>
++
++#include <asm/system.h>
++#include <asm/pci-bridge.h>
++#include <asm/processor.h>
++#include <asm/machdep.h>
++#include <asm/page.h>
++#include <asm/time.h>
++#include <asm/io.h>
++#include <asm/kgdb.h>
++#include <asm/ocp.h>
++#include <asm/ibm_ocp_pci.h>
++
++#include <platforms/4xx/ibm405ep.h>
++
++#undef DEBUG
++
++#ifdef DEBUG
++#define DBG(x...) printk(x)
++#else
++#define DBG(x...)
++#endif
++
++extern bd_t __res;
++
++/* Some IRQs unique to board
++ * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
++ */
++int __init
++ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
++{
++	static char pci_irq_table[][4] =
++	    /*
++	     *      PCI IDSEL/INTPIN->INTLINE
++	     *      A       B       C       D
++	     */
++	{
++		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
++		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
++		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
++		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
++	};
++
++	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
++	return PCI_IRQ_TABLE_LOOKUP;
++};
++
++
++/* The serial clock for the chip is an internal clock determined by
++ * different clock speeds/dividers.
++ * Calculate the proper input baud rate and setup the serial driver.
++ */
++static void __init
++magicbox_early_serial_map(void)
++{
++	u32 uart_div;
++	int uart_clock;
++	struct uart_port port;
++
++         /* Calculate the serial clock input frequency
++          *
++          * The base baud is the PLL OUTA (provided in the board info
++          * structure) divided by the external UART Divisor, divided
++          * by 16.
++          */
++	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
++	uart_clock = __res.bi_procfreq / uart_div;
++
++	/* Setup serial port access */
++	memset(&port, 0, sizeof(port));
++	port.membase = (void*)ACTING_UART0_IO_BASE;
++	port.irq = ACTING_UART0_INT;
++	port.uartclk = uart_clock;
++	port.regshift = 0;
++	port.iotype = SERIAL_IO_MEM;
++	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
++	port.line = 0;
++
++	if (early_serial_setup(&port) != 0) {
++		printk("Early serial init of port 0 failed\n");
++	}
++
++	port.membase = (void*)ACTING_UART1_IO_BASE;
++	port.irq = ACTING_UART1_INT;
++	port.line = 1;
++
++	if (early_serial_setup(&port) != 0) {
++		printk("Early serial init of port 1 failed\n");
++	}
++}
++
++void __init
++bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
++{
++	unsigned int bar_response, bar;
++	/*
++	 * Expected PCI mapping:
++	 *
++	 *  PLB addr             PCI memory addr
++	 *  ---------------------       ---------------------
++	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
++	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
++	 *
++	 *  PLB addr             PCI io addr
++	 *  ---------------------       ---------------------
++	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
++	 *
++	 * The following code is simplified by assuming that the bootrom
++	 * has been well behaved in following this mapping.
++	 */
++
++#ifdef DEBUG
++	int i;
++
++	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
++	printk("PCI bridge regs before fixup \n");
++	for (i = 0; i <= 3; i++) {
++		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
++		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
++		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
++		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
++	}
++	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
++	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
++	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
++	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
++
++#endif
++
++	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
++
++	/* Disable region first */
++	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
++	/* PLB starting addr, PCI: 0x80000000 */
++	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
++	/* PCI start addr, 0x80000000 */
++	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
++	/* 512MB range of PLB to PCI */
++	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
++	/* Enable no pre-fetch, enable region */
++	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
++						(PPC405_PCI_UPPER_MEM -
++						 PPC405_PCI_MEM_BASE)) | 0x01));
++
++	/* Disable region one */
++	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
++	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
++	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
++	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
++	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
++	out_le32((void *) &(pcip->ptm1ms), 0x00000001);
++
++	/* Disable region two */
++	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
++	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
++	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
++	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
++	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
++	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
++	out_le32((void *) &(pcip->ptm2la), 0x00000000);
++
++	/* Zero config bars */
++	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
++		early_write_config_dword(hose, hose->first_busno,
++					 PCI_FUNC(hose->first_busno), bar,
++					 0x00000000);
++		early_read_config_dword(hose, hose->first_busno,
++					PCI_FUNC(hose->first_busno), bar,
++					&bar_response);
++		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
++		    hose->first_busno, PCI_SLOT(hose->first_busno),
++		    PCI_FUNC(hose->first_busno), bar, bar_response);
++	}
++	/* end work arround */
++
++#ifdef DEBUG
++	printk("PCI bridge regs after fixup \n");
++	for (i = 0; i <= 3; i++) {
++		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
++		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
++		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
++		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
++	}
++	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
++	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
++	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
++	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
++
++#endif /* DEBUG */
++}
++
++void __init
++magicbox_setup_arch(void)
++{
++	ppc4xx_setup_arch();
++
++	ibm_ocp_set_emac(0, 1);
++
++	magicbox_early_serial_map();
++
++	/* Identify the system */
++	printk("MagicBox port (C) 2005 Karol Lewandowski <kl@jasmine.eu.org>\n");
++}
++
++void __init
++magicbox_map_io(void)
++{
++	ppc4xx_map_io();
++}
++
++void __init
++platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
++	      unsigned long r6, unsigned long r7)
++{
++	ppc4xx_init(r3, r4, r5, r6, r7);
++
++	ppc_md.setup_arch = magicbox_setup_arch;
++	ppc_md.setup_io_mappings = magicbox_map_io;
++
++#ifdef CONFIG_KGDB
++	ppc_md.early_serial_map = bubinga_early_serial_map;
++#endif
++
++}
+diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/magicbox.h linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.h
+--- linux-2.6.17/arch/ppc/platforms/4xx/magicbox.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.h	2006-08-25 23:33:05.000000000 +0200
+@@ -0,0 +1,47 @@
++/*
++ * Support for IBM PPC 405EP-based MagicBox board
++ *
++ * Heavily based on bubinga.h
++ *
++ *
++ * Author: SAW (IBM), derived from walnut.h.
++ *         Maintained by MontaVista Software <source@mvista.com>
++ *
++ * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
++ * terms of the GNU General Public License version 2. This program is
++ * licensed "as is" without any warranty of any kind, whether express
++ * or implied.
++ */
++
++#ifdef __KERNEL__
++#ifndef __MAGICBOX_H__
++#define __MAGICBOX_H__
++
++#include <linux/config.h>
++#include <platforms/4xx/ibm405ep.h>
++#include <asm/ppcboot.h>
++
++/* Memory map for the "MagicBox" 405EP evaluation board -- generic 4xx. */
++
++/* The UART clock is based off an internal clock -
++ * define BASE_BAUD based on the internal clock and divider(s).
++ * Since BASE_BAUD must be a constant, we will initialize it
++ * using clock/divider values which OpenBIOS initializes
++ * for typical configurations at various CPU speeds.
++ * The base baud is calculated as (FWDA / EXT UART DIV / 16)
++ */
++#define BASE_BAUD       0
++
++/* Flash */
++#define PPC40x_FPGA_BASE	0xF0300000
++#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */
++#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
++#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
++#define PPC40x_FLASH_LOW	0xFFF00000
++#define PPC40x_FLASH_HIGH	0xFFF80000
++#define PPC40x_FLASH_SIZE	0x80000
++
++#define PPC4xx_MACHINE_NAME	"MagicBox"
++
++#endif /* __MAGICBOX_H__ */
++#endif /* __KERNEL__ */
+diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/Makefile linux-2.6.17-owrt/arch/ppc/platforms/4xx/Makefile
+--- linux-2.6.17/arch/ppc/platforms/4xx/Makefile	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/Makefile	2006-08-25 23:33:05.000000000 +0200
+@@ -13,6 +13,7 @@
+ obj-$(CONFIG_REDWOOD_6)		+= redwood6.o
+ obj-$(CONFIG_SYCAMORE)		+= sycamore.o
+ obj-$(CONFIG_WALNUT)		+= walnut.o
++obj-$(CONFIG_MAGICBOX)		+= magicbox.o
+ obj-$(CONFIG_XILINX_ML300)	+= xilinx_ml300.o
+ obj-$(CONFIG_XILINX_ML403)	+= xilinx_ml403.o
+ 
+diff -Nur linux-2.6.17/include/asm-ppc/ibm4xx.h linux-2.6.17-owrt/include/asm-ppc/ibm4xx.h
+--- linux-2.6.17/include/asm-ppc/ibm4xx.h	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/include/asm-ppc/ibm4xx.h	2006-08-25 23:33:05.000000000 +0200
+@@ -19,6 +19,10 @@
+ 
+ #ifdef CONFIG_40x
+ 
++#if defined(CONFIG_MAGICBOX)
++#include <platforms/4xx/magicbox.h>
++#endif
++
+ #if defined(CONFIG_BUBINGA)
+ #include <platforms/4xx/bubinga.h>
+ #endif
diff --git a/target/linux/magicbox-2.6/patches/002-flash_map.patch b/target/linux/magicbox-2.6/patches/002-flash_map.patch
new file mode 100644
index 0000000..e5f803a
--- /dev/null
+++ b/target/linux/magicbox-2.6/patches/002-flash_map.patch
@@ -0,0 +1,147 @@
+diff -urN linux.old/drivers/mtd/maps/Kconfig linux.dev/drivers/mtd/maps/Kconfig
+--- linux.old/drivers/mtd/maps/Kconfig	2006-08-30 06:30:59.000000000 +0200
++++ linux.dev/drivers/mtd/maps/Kconfig	2006-08-30 06:11:51.000000000 +0200
+@@ -323,6 +323,15 @@
+ 	  Walnut board. If you have one of these boards and would like to
+ 	  use the flash chips on it, say 'Y'.
+ 
++config MTD_MAGICMAP
++	tristate "Flash device mapped on IBM 405EP MagicBox"
++	depends on MTD_CFI && MTD_PARTITIONS && 40x && MAGICBOX
++	help
++	  This enables access routines for the flash chips on the IBM 405EP
++	  MagicBox board. If you have one of these boards and would like to
++	  use the flash chips on it, say 'Y'.
++
++
+ config MTD_EBONY
+ 	tristate "Flash devices mapped on IBM 440GP Ebony"
+ 	depends on MTD_JEDECPROBE && EBONY
+diff -urN linux.old/drivers/mtd/maps/magicmap.c linux.dev/drivers/mtd/maps/magicmap.c
+--- linux.old/drivers/mtd/maps/magicmap.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/mtd/maps/magicmap.c	2006-08-30 06:52:34.000000000 +0200
+@@ -0,0 +1,113 @@
++/*
++ * magicmap.c: Copyleft 2005  Karol Lewandowski
++ *
++ * Mapping for MagicBox flash.
++ * Based on walnut.c.
++ *
++ * Heikki Lindholm <holindho@infradead.org>
++ *
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <linux/config.h>
++#include <asm/io.h>
++
++static struct mtd_info *flash;
++
++static struct map_info magic_map = {
++	.name =		"Magically mapped flash",
++	.phys =         0xffc00000,
++	.size =		0x400000,
++	.bankwidth =	2,
++};
++
++static struct mtd_partition magic_partitions[] = {
++	{
++		.name =   "linux",
++		.offset = 0x0,
++		.size =   0x3c0000,
++	},
++	{
++		.name =   "rootfs",
++		.offset = 0x100000,
++		.size =   0x2c0000,
++	},
++	{
++		.name =   "bootloader",
++		.offset = 0x3c0000,
++		.size =   0x040000,
++		.mask_flags = MTD_WRITEABLE,
++	},
++};
++
++int __init init_magic(void)
++{
++	u32 size, len;
++	
++	magic_map.virt =
++		(void __iomem *)ioremap(magic_map.phys, magic_map.size);
++
++	if (!magic_map.virt) {
++		printk("Failed to ioremap flash.\n");
++		return -EIO;
++	}
++
++	simple_map_init(&magic_map);
++
++	flash = do_map_probe("cfi_probe", &magic_map);
++	if (flash) {
++		flash->owner = THIS_MODULE;
++		if (MTD_READ(flash, 12, sizeof(u32), &len, (char *) &size) ||
++			len != 4)
++			return -ENXIO;
++		size += 0x40; /* header size of the uImage */
++		if (size < 0x400000) {
++			/* skip to next erase block */
++			if (size & (flash->erasesize - 1)) {
++				size |= (flash->erasesize - 1);
++				size += 1;
++			}
++			magic_partitions[1].offset = size;
++			magic_partitions[1].size = magic_partitions[2].offset - size;
++		}
++		
++		add_mtd_partitions(flash, magic_partitions,
++					ARRAY_SIZE(magic_partitions));
++	} else {
++		printk("map probe failed for flash\n");
++		return -ENXIO;
++	}
++
++	return 0;
++}
++
++static void __exit cleanup_magic(void)
++{
++	if (flash) {
++		del_mtd_partitions(flash);
++		map_destroy(flash);
++	}
++
++	if (magic_map.virt) {
++		iounmap((void *)magic_map.virt);
++		magic_map.virt = NULL;
++	}
++}
++
++module_init(init_magic);
++module_exit(cleanup_magic);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Karol Lewandowski");
++MODULE_DESCRIPTION("MTD map and partitions for IBM 405EP MagicBox boards");
+diff -urN linux.old/drivers/mtd/maps/Makefile linux.dev/drivers/mtd/maps/Makefile
+--- linux.old/drivers/mtd/maps/Makefile	2006-08-30 06:30:59.000000000 +0200
++++ linux.dev/drivers/mtd/maps/Makefile	2006-08-30 06:11:51.000000000 +0200
+@@ -58,6 +58,7 @@
+ obj-$(CONFIG_MTD_BEECH)		+= beech-mtd.o
+ obj-$(CONFIG_MTD_ARCTIC)	+= arctic-mtd.o
+ obj-$(CONFIG_MTD_WALNUT)        += walnut.o
++obj-$(CONFIG_MTD_MAGICMAP)      += magicmap.o
+ obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
+ obj-$(CONFIG_MTD_SBC8240)	+= sbc8240.o
+ obj-$(CONFIG_MTD_NOR_TOTO)	+= omap-toto-flash.o