strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

SVN-Revision: 8653

8 files changed, 851 insertions, 0 deletions

diff --git a/target/linux/magicbox/Makefile b/target/linux/magicbox/Makefile
new file mode 100644
index 0000000..e003330
--- /dev/null
+++ b/target/linux/magicbox/Makefile
@@ -0,0 +1,21 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=powerpc
+BOARD:=magicbox
+BOARDNAME:=Magicbox
+FEATURES:=squashfs jffs2
+
+LINUX_VERSION:=2.6.22.4
+
+include $(INCLUDE_DIR)/kernel-build.mk
+
+# include the profiles
+-include profiles/*.mk
+
+$(eval $(call BuildKernel))
diff --git a/target/linux/magicbox/config/default b/target/linux/magicbox/config/default
new file mode 100644
index 0000000..3e36514
--- /dev/null
+++ b/target/linux/magicbox/config/default
@@ -0,0 +1,174 @@
+CONFIG_405EP=y
+CONFIG_40x=y
+# CONFIG_44x is not set
+CONFIG_4xx=y
+# CONFIG_6xx is not set
+# CONFIG_8139TOO is not set
+# CONFIG_8xx is not set
+# CONFIG_ADVANCED_OPTIONS is not set
+# CONFIG_AGP is not set
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_B44 is not set
+CONFIG_BASE_SMALL=0
+CONFIG_BIOS_FIXUP=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_IDE=m
+# CONFIG_BLK_DEV_IDECD is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_MAGICBOX_IDE=y
+# CONFIG_BOOKE_WDT is not set
+CONFIG_BOOT_LOAD=0x00400000
+# CONFIG_BT is not set
+# CONFIG_BUBINGA is not set
+CONFIG_CMDLINE="root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 init=/etc/preinit"
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_CONSISTENT_START=0xff100000
+# CONFIG_CPCI405 is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+# CONFIG_EP405 is not set
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_NVRAM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_I2C is not set
+CONFIG_IBM_EMAC=y
+# CONFIG_IBM_EMAC_DEBUG is not set
+# CONFIG_IBM_EMAC_PHY_RX_CLK_FIX is not set
+CONFIG_IBM_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_EMAC_RXB=64
+CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
+CONFIG_IBM_EMAC_TXB=8
+CONFIG_IBM_OCP=y
+CONFIG_IDE=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_IDE_GENERIC=m
+CONFIG_IDE_MAX_HWIFS=4
+# CONFIG_IDE_PROC_FS is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_ISA_DMA_API=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_KERNEL_START=0xc0000000
+# CONFIG_KEXEC is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LOWMEM_SIZE=0x30000000
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_MAGICBOX=y
+CONFIG_MATH_EMULATION=y
+CONFIG_MINI_FO=y
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_START=0xffc00000
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NOT_COHERENT_CACHE=y
+# CONFIG_NVRAM is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_PM is not set
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_PPC4xx_DMA=y
+CONFIG_PPC4xx_EDMA=y
+CONFIG_PPC_GEN550=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PPC_OCP=y
+# CONFIG_REDWOOD_5 is not set
+# CONFIG_REDWOOD_6 is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOUND is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SYCAMORE is not set
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_UART0_TTYS0=y
+# CONFIG_UART0_TTYS1 is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_WALNUT is not set
+CONFIG_WANT_EARLY_SERIAL=y
+# CONFIG_WINDFARM is not set
+# CONFIG_XILINX_ML300 is not set
+# CONFIG_XILINX_ML403 is not set
diff --git a/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.c b/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.c
new file mode 100644
index 0000000..18c67ab
--- /dev/null
+++ b/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.c
@@ -0,0 +1,297 @@
+/*
+ * Support for IBM PPC 405EP-based MagicBox board 
+ * Copyright (C) 2006  Karol Lewandowski
+ *
+ * Heavily based on bubinga.c
+ *
+ * Author: SAW (IBM), derived from walnut.c.
+ *         Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/blkdev.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/kgdb.h>
+#include <asm/ocp.h>
+#include <asm/ibm_ocp_pci.h>
+
+#include <platforms/4xx/ibm405ep.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+extern bd_t __res;
+
+/* Some IRQs unique to the board
+ * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
+ */
+int __init
+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	    /*
+	     *      PCI IDSEL/INTPIN->INTLINE
+	     *      A       B       C       D
+	     */
+	{
+		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
+		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
+		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
+		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
+	};
+
+	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+};
+
+/* The serial clock for the chip is an internal clock determined by
+ * different clock speeds/dividers.
+ * Calculate the proper input baud rate and setup the serial driver.
+ */
+static void __init
+magicbox_early_serial_map(void)
+{
+	u32 uart_div;
+	int uart_clock;
+	struct uart_port port;
+
+         /* Calculate the serial clock input frequency
+          *
+          * The base baud is the PLL OUTA (provided in the board info
+          * structure) divided by the external UART Divisor, divided
+          * by 16.
+          */
+	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
+	uart_clock = __res.bi_procfreq / uart_div;
+
+	/* Setup serial port access */
+	memset(&port, 0, sizeof(port));
+	port.membase = (void*)ACTING_UART0_IO_BASE;
+	port.irq = ACTING_UART0_INT;
+	port.uartclk = uart_clock;
+	port.regshift = 0;
+	port.iotype = UPIO_MEM;
+	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+	port.line = 0;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 0 failed\n");
+	}
+
+	port.membase = (void*)ACTING_UART1_IO_BASE;
+	port.irq = ACTING_UART1_INT;
+	port.line = 1;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 1 failed\n");
+	}
+}
+
+void __init
+bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
+{
+#ifdef CONFIG_PCI
+
+	unsigned int bar_response, bar;
+	/*
+	 * Expected PCI mapping:
+	 *
+	 *  PLB addr             PCI memory addr
+	 *  ---------------------       ---------------------
+	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
+	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
+	 *
+	 *  PLB addr             PCI io addr
+	 *  ---------------------       ---------------------
+	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
+	 *
+	 * The following code is simplified by assuming that the bootrom
+	 * has been well behaved in following this mapping.
+	 */
+
+#ifdef DEBUG
+	int i;
+
+	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
+	printk("PCI bridge regs before fixup \n");
+	for (i = 0; i <= 3; i++) {
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+	}
+	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif
+
+	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
+
+	/* Disable region first */
+	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
+	/* PLB starting addr, PCI: 0x80000000 */
+	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
+	/* PCI start addr, 0x80000000 */
+	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
+	/* 512MB range of PLB to PCI */
+	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
+	/* Enable no pre-fetch, enable region */
+	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
+						(PPC405_PCI_UPPER_MEM -
+						 PPC405_PCI_MEM_BASE)) | 0x01));
+
+	/* Disable region one */
+	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+	out_le32((void *) &(pcip->ptm1ms), 0x00000001);
+
+	/* Disable region two */
+	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
+	out_le32((void *) &(pcip->ptm2la), 0x00000000);
+
+	/* Zero config bars */
+	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+		early_write_config_dword(hose, hose->first_busno,
+					 PCI_FUNC(hose->first_busno), bar,
+					 0x00000000);
+		early_read_config_dword(hose, hose->first_busno,
+					PCI_FUNC(hose->first_busno), bar,
+					&bar_response);
+		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
+		    hose->first_busno, PCI_SLOT(hose->first_busno),
+		    PCI_FUNC(hose->first_busno), bar, bar_response);
+	}
+	/* end workaround */
+
+#ifdef DEBUG
+	printk("PCI bridge regs after fixup \n");
+	for (i = 0; i <= 3; i++) {
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+	}
+	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif
+#endif
+}
+
+static struct resource magicbox_flash_resource = {
+	.start = 0xffc00000,
+	.end   = 0xffffffffULL,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition magicbox_flash_parts[] = {
+	{
+		.name = "linux",
+		.offset = 0x0,
+		.size = 0x3c0000,
+	},
+	{
+		.name = "rootfs",
+		.offset = 0x100000,
+		.size = 0x2c0000,
+	}
+};
+
+static struct physmap_flash_data magicbox_flash_data = {
+	.width		= 2,
+	.parts		= magicbox_flash_parts,
+	.nr_parts	= ARRAY_SIZE(magicbox_flash_parts),
+};
+
+static struct platform_device magicbox_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+			.platform_data = &magicbox_flash_data,
+		},
+	.num_resources	= 1,
+	.resource	= &magicbox_flash_resource,
+};
+
+static int magicbox_setup_flash(void)
+{
+	platform_device_register(&magicbox_flash_device);
+
+	return 0;
+};
+
+arch_initcall (magicbox_setup_flash);
+
+void __init
+magicbox_setup_arch(void)
+{
+	ppc4xx_setup_arch();
+
+	ibm_ocp_set_emac(0, 1);
+
+	magicbox_early_serial_map();
+
+	/* Identify the system */
+	printk("MagicBox port (C) 2005 Karol Lewandowski <kl@jasmine.eu.org>\n");
+}
+
+void __init
+magicbox_map_io(void)
+{
+	ppc4xx_map_io();
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	      unsigned long r6, unsigned long r7)
+{
+	ppc4xx_init(r3, r4, r5, r6, r7);
+
+	ppc_md.setup_arch = magicbox_setup_arch;
+	ppc_md.setup_io_mappings = magicbox_map_io;
+
+#ifdef CONFIG_KGDB
+	ppc_md.early_serial_map = bubinga_early_serial_map;
+#endif
+}
+
diff --git a/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.h b/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.h
new file mode 100644
index 0000000..50b8d41
--- /dev/null
+++ b/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.h
@@ -0,0 +1,46 @@
+/*
+ * Support for IBM PPC 405EP-based MagicBox board
+ *
+ * Heavily based on bubinga.h
+ *
+ *
+ * Author: SAW (IBM), derived from walnut.h.
+ *         Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __MAGICBOX_H__
+#define __MAGICBOX_H__
+
+#include <platforms/4xx/ibm405ep.h>
+#include <asm/ppcboot.h>
+
+/* Memory map for the "MagicBox" 405EP evaluation board -- generic 4xx. */
+
+/* The UART clock is based off an internal clock -
+ * define BASE_BAUD based on the internal clock and divider(s).
+ * Since BASE_BAUD must be a constant, we will initialize it
+ * using clock/divider values which OpenBIOS initializes
+ * for typical configurations at various CPU speeds.
+ * The base baud is calculated as (FWDA / EXT UART DIV / 16)
+ */
+#define BASE_BAUD		0
+
+/* Flash */
+#define PPC40x_FPGA_BASE	0xF0300000
+#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW	0xFFF00000
+#define PPC40x_FLASH_HIGH	0xFFF80000
+#define PPC40x_FLASH_SIZE	0x80000
+
+#define PPC4xx_MACHINE_NAME	"MagicBox"
+
+#endif /* __MAGICBOX_H__ */
+#endif /* __KERNEL__ */
diff --git a/target/linux/magicbox/files/drivers/ide/ppc/magicbox_ide.c b/target/linux/magicbox/files/drivers/ide/ppc/magicbox_ide.c
new file mode 100644
index 0000000..2e29e83
--- /dev/null
+++ b/target/linux/magicbox/files/drivers/ide/ppc/magicbox_ide.c
@@ -0,0 +1,152 @@
+/* Driver for MagicBox 2.0 onboard CompactFlash adapter.
+ * Written by Wojtek Kaniewski <wojtekka@toxygen.net>
+ *
+ * GNU General Public License.
+ */
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+
+#define UIC0_PR 0xc4
+#define UIC0_TR 0xc5
+#define IRQ 25
+
+static int ide_offsets[IDE_NR_PORTS] = {0, 2, 4, 6, 8, 10, 12, 14, -1, -1};
+
+static u8 magicbox_ide_inb (unsigned long port)
+{
+	return (u8) (readw((void __iomem *) port) >> 8) & 255;
+}
+
+static u16 magicbox_ide_inw (unsigned long port)
+{
+	return (u16) readw((void __iomem *) port);
+}
+
+static void magicbox_ide_insw (unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr;
+
+	for (ptr = addr; count--; ptr++)
+		*ptr = readw((void __iomem *) port);
+}
+
+static u32 magicbox_ide_inl (unsigned long port)
+{
+	return (u32) readl((void __iomem *) port);
+}
+
+static void magicbox_ide_insl (unsigned long port, void *addr, u32 count)
+{
+	u32 *ptr;
+
+	for (ptr = addr; count--; ptr++)
+		*ptr = readl((void __iomem *) port);
+}
+
+static void magicbox_ide_outb (u8 value, unsigned long port)
+{
+	writew(value << 8, (void __iomem *) port);
+}
+
+static void magicbox_ide_outbsync (ide_drive_t *drive, u8 value, unsigned long port)
+{
+	writew(value << 8, (void __iomem *) port);
+}
+
+static void magicbox_ide_outw (u16 value, unsigned long port)
+{
+	writew(value, (void __iomem *) port);
+}
+
+static void magicbox_ide_outsw (unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr;
+
+	for (ptr = addr; count--; ptr++)
+		writew(*ptr, (void __iomem *) port);
+}
+
+static void magicbox_ide_outl (u32 value, unsigned long port)
+{
+	writel(value, (void __iomem *) port);
+}
+
+static void magicbox_ide_outsl (unsigned long port, void *addr, u32 count)
+{
+	u32 *ptr;
+
+	for (ptr = addr; count--; ptr++)
+		writel(*ptr, (void __iomem *) port);
+}
+
+
+static void __init ide_magicbox_register(unsigned long addr,
+					 unsigned long caddr, int irq)
+{
+	hw_regs_t hw;
+	ide_hwif_t *hwif;
+
+  	memset(&hw, 0, sizeof(hw));
+	ide_setup_ports(&hw, addr, ide_offsets, caddr + 12, 0, NULL,irq);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22)
+	if (ide_register_hw(&hw, &hwif) != -1)
+#else
+	if (ide_register_hw(&hw, 1, &hwif) != -1)
+#endif
+	{
+		printk(KERN_NOTICE "magicbox-ide: Registered IDE-CF driver\n");
+		hwif->mmio = 2;
+		hwif->drives[0].unmask = 1;
+		hwif->OUTB = magicbox_ide_outb;
+		hwif->OUTBSYNC = magicbox_ide_outbsync;
+		hwif->OUTW = magicbox_ide_outw;
+		hwif->OUTSW = magicbox_ide_outsw;
+		hwif->OUTSL = magicbox_ide_outsl;
+		hwif->INB = magicbox_ide_inb;
+		hwif->INW = magicbox_ide_inw;
+		hwif->INSW = magicbox_ide_insw;
+		hwif->INSL = magicbox_ide_insl;
+	}
+}
+
+void __init ide_magicbox_init(void)
+{
+	volatile u16 *addr;
+	volatile u16 *caddr;
+
+	/* Turn on PerWE instead of PCIsomething */
+	mtdcr(DCRN_CPC0_PCI_BASE, mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27));
+
+	/* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */
+	mtdcr(DCRN_EBC_BASE, 1);
+	mtdcr(DCRN_EBC_BASE + 1, 0xff11a000);
+	mtdcr(DCRN_EBC_BASE, 0x11);
+	mtdcr(DCRN_EBC_BASE + 1, 0x080bd800);
+
+	/* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */
+	mtdcr(DCRN_EBC_BASE, 2);
+	mtdcr(DCRN_EBC_BASE + 1, 0xff21a000);
+	mtdcr(DCRN_EBC_BASE, 0x12);
+	mtdcr(DCRN_EBC_BASE + 1, 0x080bd800);
+
+	/* Remap physical address space */
+	addr = ioremap_nocache(0xff100000, 4096);
+	caddr = ioremap_nocache(0xff200000, 4096);
+
+	/* Set interrupt to low-to-high-edge-triggered */
+	mtdcr(UIC0_TR, mfdcr(UIC0_TR) & ~(0x80000000L >> IRQ));
+	mtdcr(UIC0_PR, mfdcr(UIC0_PR) | (0x80000000L >> IRQ));
+
+	ide_magicbox_register((unsigned long)addr, (unsigned long)caddr, IRQ);
+}
+
diff --git a/target/linux/magicbox/image/Makefile b/target/linux/magicbox/image/Makefile
new file mode 100644
index 0000000..f99590f
--- /dev/null
+++ b/target/linux/magicbox/image/Makefile
@@ -0,0 +1,37 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Image/Prepare
+	cp $(LINUX_DIR)/arch/ppc/boot/images/uImage $(KDIR)/uImage
+endef
+
+define Image/BuildKernel
+	cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage
+endef
+
+define Image/Build
+	$(call Image/Build/$(1),$(1))
+endef
+
+define Image/Build/jffs2-64k
+	( \
+		dd if=$(KDIR)/uImage bs=1024k conv=sync; \
+		dd if=$(KDIR)/root.$(1) bs=65536 conv=sync; \
+	) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
+endef
+
+define Image/Build/squashfs
+	$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+	( \
+		dd if=$(LINUX_DIR)/arch/ppc/boot/images/uImage bs=1024k conv=sync; \
+		dd if=$(KDIR)/root.$(1) bs=65536 conv=sync; \
+	) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/magicbox/patches-2.6.22/001-magicbox_support.patch b/target/linux/magicbox/patches-2.6.22/001-magicbox_support.patch
new file mode 100644
index 0000000..de7e86b
--- /dev/null
+++ b/target/linux/magicbox/patches-2.6.22/001-magicbox_support.patch
@@ -0,0 +1,71 @@
+Index: linux-2.6.22-rc6/arch/ppc/platforms/4xx/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/arch/ppc/platforms/4xx/Kconfig	2007-06-28 08:23:13.508980416 +0200
++++ linux-2.6.22-rc6/arch/ppc/platforms/4xx/Kconfig	2007-06-28 08:23:15.637656808 +0200
+@@ -53,6 +53,12 @@
+ 	help
+ 	  This option enables support for the IBM PPC405GP evaluation board.
+ 
++config MAGICBOX
++	bool "MagicBox"
++	select WANT_EARLY_SERIAL
++	help
++	  This option enables support for the IBM PPC405EP evaluation board.
++
+ config XILINX_ML300
+ 	bool "Xilinx-ML300"
+ 	select XILINX_VIRTEX_II_PRO
+@@ -184,7 +190,7 @@
+ 
+ config IBM_OCP
+ 	bool
+-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT
++	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT || MAGICBOX
+ 	default y
+ 
+ config IBM_EMAC4
+@@ -194,7 +200,7 @@
+ 
+ config BIOS_FIXUP
+ 	bool
+-	depends on BUBINGA || EP405 || SYCAMORE || WALNUT || CPCI405
++	depends on BUBINGA || EP405 || SYCAMORE || WALNUT || CPCI405 || MAGICBOX
+ 	default y
+ 
+ # OAK doesn't exist but wanted to keep this around for any future 403GCX boards
+@@ -205,7 +211,7 @@
+ 
+ config 405EP
+ 	bool
+-	depends on BUBINGA
++	depends on BUBINGA || MAGICBOX
+ 	default y
+ 
+ config 405GP
+Index: linux-2.6.22-rc6/arch/ppc/platforms/4xx/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/arch/ppc/platforms/4xx/Makefile	2007-06-28 08:23:13.516979200 +0200
++++ linux-2.6.22-rc6/arch/ppc/platforms/4xx/Makefile	2007-06-28 08:23:15.637656808 +0200
+@@ -14,6 +14,7 @@
+ obj-$(CONFIG_SYCAMORE)		+= sycamore.o
+ obj-$(CONFIG_TAISHAN)		+= taishan.o
+ obj-$(CONFIG_WALNUT)		+= walnut.o
++obj-$(CONFIG_MAGICBOX)		+= magicbox.o
+ obj-$(CONFIG_XILINX_ML300)	+= xilinx_ml300.o
+ obj-$(CONFIG_XILINX_ML403)	+= xilinx_ml403.o
+ 
+Index: linux-2.6.22-rc6/include/asm-ppc/ibm4xx.h
+===================================================================
+--- linux-2.6.22-rc6.orig/include/asm-ppc/ibm4xx.h	2007-06-28 08:23:13.526977680 +0200
++++ linux-2.6.22-rc6/include/asm-ppc/ibm4xx.h	2007-06-28 08:23:15.637656808 +0200
+@@ -19,6 +19,10 @@
+ 
+ #ifdef CONFIG_40x
+ 
++#if defined(CONFIG_MAGICBOX)
++#include <platforms/4xx/magicbox.h>
++#endif
++
+ #if defined(CONFIG_BUBINGA)
+ #include <platforms/4xx/bubinga.h>
+ #endif
diff --git a/target/linux/magicbox/patches-2.6.22/100-cf_slot.patch b/target/linux/magicbox/patches-2.6.22/100-cf_slot.patch
new file mode 100644
index 0000000..3a5dde7
--- /dev/null
+++ b/target/linux/magicbox/patches-2.6.22/100-cf_slot.patch
@@ -0,0 +1,53 @@
+Index: linux-2.6.22-rc6/drivers/ide/ide.c
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/ide/ide.c	2007-06-28 08:23:49.463514496 +0200
++++ linux-2.6.22-rc6/drivers/ide/ide.c	2007-06-28 08:23:54.658724704 +0200
+@@ -1604,6 +1604,7 @@
+ extern void __init pnpide_init(void);
+ extern void __exit pnpide_exit(void);
+ extern void __init h8300_ide_init(void);
++extern void __init ide_magicbox_init(void);
+ 
+ /*
+  * probe_for_hwifs() finds/initializes "known" IDE interfaces
+@@ -1668,6 +1669,9 @@
+ #ifdef CONFIG_H8300
+ 	h8300_ide_init();
+ #endif
++#ifdef CONFIG_BLK_DEV_MAGICBOX_IDE
++	ide_magicbox_init();
++#endif
+ }
+ 
+ /*
+Index: linux-2.6.22-rc6/drivers/ide/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/ide/Kconfig	2007-06-28 08:23:49.470513432 +0200
++++ linux-2.6.22-rc6/drivers/ide/Kconfig	2007-06-28 08:23:54.658724704 +0200
+@@ -946,6 +946,14 @@
+ 
+ 	  If unsure, say N.
+ 
++config BLK_DEV_MAGICBOX_IDE
++	bool "MagicBox 2.0 CF IDE support"
++	depends on 4xx && IDE
++	help
++	  This option provides support for IDE on MagicBox 2.0 boards.
++
++	  If unsure, say N.
++
+ choice
+ 	prompt "Type of MPC8xx IDE interface"
+ 	depends on BLK_DEV_MPC8xx_IDE
+Index: linux-2.6.22-rc6/drivers/ide/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/ide/Makefile	2007-06-28 08:23:49.478512216 +0200
++++ linux-2.6.22-rc6/drivers/ide/Makefile	2007-06-28 08:23:54.659724552 +0200
+@@ -37,6 +37,7 @@
+ # built-in only drivers from ppc/
+ ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE)	+= ppc/mpc8xx.o
+ ide-core-$(CONFIG_BLK_DEV_IDE_PMAC)	+= ppc/pmac.o
++ide-core-$(CONFIG_BLK_DEV_MAGICBOX_IDE)	+= ppc/magicbox_ide.o
+ 
+ # built-in only drivers from h8300/
+ ide-core-$(CONFIG_H8300)		+= h8300/ide-h8300.o