mediatek: update patches

fixes trgmii on old eco and adds nand support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 49066

1 files changed, 64 insertions, 0 deletions

diff --git a/target/linux/mediatek/patches-4.4/0064-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch b/target/linux/mediatek/patches-4.4/0064-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch
new file mode 100644
index 0000000..533ff56
--- /dev/null
+++ b/target/linux/mediatek/patches-4.4/0064-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch
@@ -0,0 +1,64 @@
+From 91f978e8a8f27eb9988d33904eaba55309b6c0b9 Mon Sep 17 00:00:00 2001
+From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+Date: Wed, 2 Mar 2016 12:00:11 -0500
+Subject: [PATCH 64/66] mtd: mediatek: device tree docs for MTK Smart Device
+ Gen1 NAND
+
+This patch adds documentation support for Smart Device Gen1 type of
+NAND controllers.
+
+Mediatek's SoC 2701 is one of the SoCs that implements this controller.
+
+Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+---
+ .../devicetree/bindings/mtd/mtksdg1-nand.txt       |   38 ++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt
+
+diff --git a/Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt b/Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt
+new file mode 100644
+index 0000000..129d17b
+--- /dev/null
++++ b/Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt
+@@ -0,0 +1,38 @@
++MTK Smart Device SoCs NAND controller DT binding
++
++Required properties:
++- compatible:          Should be "mediatek,mt2701-nfc".
++- reg:                 The first contains base physical address and size of
++                       NAND controller's registers. The second contains base
++                       physical address and size of NAND ECC engine.
++- interrupts:          the NFC NFI interrupt, and the NFC ECC interrupt
++- clocks:              NAND controller clocks.
++- clock-names:         NAND controller clocks internal name.
++- vmch-supply:         NAND power supply.
++- #address-cells:      Partition address, should be set 1.
++- #size-cells:         Partition size, should be set 1.
++
++Optional properties:
++
++nand-on-flash-bbt:  Use a flash based bad block table.
++
++Optional subnodes:
++- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
++
++Example:
++
++	nand: nand@1100d000 {
++		compatible = "mediatek,mt2701-nfc";
++		reg = <0 0x1100d000 0 0x1000>, <0 0x1100e000 0 0x1000>;
++		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>,
++			<GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
++		clocks = <&pericfg CLK_PERI_NFI>, <&pericfg CLK_PERI_NFI_ECC>,
++			<&pericfg CLK_PERI_NFI_PAD>;
++		clock-names = "nfi_ck", "nfi_ecc_ck", "nfi_pad_ck";
++		vmch-supply = <&mt6323_vmch_reg>;
++		status = "disabled";
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		...
++	};
+-- 
+1.7.10.4
+