diff options
author | John Crispin <john@openwrt.org> | 2016-03-21 20:42:51 +0000 |
---|---|---|
committer | John Crispin <john@openwrt.org> | 2016-03-21 20:42:51 +0000 |
commit | 5d2f529c9b83d5f769258928b5ddd82f4dc9979e (patch) | |
tree | 65ecb999d7bfda861006ffba75f375c1d7c8260d /target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch | |
parent | c8a6c583fc5f5c0834f993b591d6bb52d958c99a (diff) | |
download | mtk-20170518-5d2f529c9b83d5f769258928b5ddd82f4dc9979e.zip mtk-20170518-5d2f529c9b83d5f769258928b5ddd82f4dc9979e.tar.gz mtk-20170518-5d2f529c9b83d5f769258928b5ddd82f4dc9979e.tar.bz2 |
mediatek: bump to v4.4
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 49064
Diffstat (limited to 'target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch')
-rw-r--r-- | target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch | 775 |
1 files changed, 0 insertions, 775 deletions
diff --git a/target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch b/target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch deleted file mode 100644 index 3c2d2db..0000000 --- a/target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch +++ /dev/null @@ -1,775 +0,0 @@ -From 014330a304100782a26bc7df02778c8c386b2857 Mon Sep 17 00:00:00 2001 -From: Sascha Hauer <s.hauer@pengutronix.de> -Date: Wed, 13 May 2015 10:52:42 +0200 -Subject: [PATCH 23/76] thermal: Add Mediatek thermal controller support - -This adds support for the Mediatek thermal controller found on MT8173 -and likely other SoCs. -The controller is a bit special. It does not have its own ADC, instead -it controls the on-SoC AUXADC via AHB bus accesses. For this reason -we need the physical address of the AUXADC. Also it controls a mux -using AHB bus accesses, so we need the APMIXEDSYS physical address aswell. - -Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> ---- - drivers/thermal/Kconfig | 8 + - drivers/thermal/Makefile | 1 + - drivers/thermal/mtk_thermal.c | 728 +++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 737 insertions(+) - create mode 100644 drivers/thermal/mtk_thermal.c - ---- a/drivers/thermal/Kconfig -+++ b/drivers/thermal/Kconfig -@@ -285,6 +285,14 @@ config ACPI_THERMAL_REL - tristate - depends on ACPI - -+config MTK_THERMAL -+ tristate "Temperature sensor driver for mediatek SoCs" -+ depends on ARCH_MEDIATEK || COMPILE_TEST -+ default y -+ help -+ Enable this option if you want to have support for thermal management -+ controller present in Mediatek SoCs -+ - menu "Texas Instruments thermal drivers" - source "drivers/thermal/ti-soc-thermal/Kconfig" - endmenu ---- a/drivers/thermal/Makefile -+++ b/drivers/thermal/Makefile -@@ -39,3 +39,4 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-t - obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ - obj-$(CONFIG_ST_THERMAL) += st/ - obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o -+obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o ---- /dev/null -+++ b/drivers/thermal/mtk_thermal.c -@@ -0,0 +1,728 @@ -+/* -+ * Copyright (c) 2014 MediaTek Inc. -+ * Author: Hanyi.Wu <hanyi.wu@mediatek.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/dmi.h> -+#include <linux/thermal.h> -+#include <linux/platform_device.h> -+#include <linux/types.h> -+#include <linux/delay.h> -+#include <linux/slab.h> -+#include <linux/clk.h> -+#include <linux/time.h> -+#include <linux/of.h> -+#include <linux/of_irq.h> -+#include <linux/of_address.h> -+#include <linux/interrupt.h> -+#include <linux/reset.h> -+ -+/* AUXADC Registers */ -+#define AUXADC_CON0_V 0x000 -+#define AUXADC_CON1_V 0x004 -+#define AUXADC_CON1_SET_V 0x008 -+#define AUXADC_CON1_CLR_V 0x00c -+#define AUXADC_CON2_V 0x010 -+#define AUXADC_DATA(channel) (0x14 + (channel) * 4) -+#define AUXADC_MISC_V 0x094 -+ -+#define AUXADC_CON1_CHANNEL(x) (1 << (x)) -+ -+/* Thermal Controller Registers */ -+#define TEMPMONCTL0 0x000 -+#define TEMPMONCTL1 0x004 -+#define TEMPMONCTL2 0x008 -+#define TEMPMONINT 0x00c -+#define TEMPMONINTSTS 0x010 -+#define TEMPMONIDET0 0x014 -+#define TEMPMONIDET1 0x018 -+#define TEMPMONIDET2 0x01c -+#define TEMPH2NTHRE 0x024 -+#define TEMPHTHRE 0x028 -+#define TEMPCTHRE 0x02c -+#define TEMPOFFSETH 0x030 -+#define TEMPOFFSETL 0x034 -+#define TEMPMSRCTL0 0x038 -+#define TEMPMSRCTL1 0x03c -+#define TEMPAHBPOLL 0x040 -+#define TEMPAHBTO 0x044 -+#define TEMPADCPNP0 0x048 -+#define TEMPADCPNP1 0x04c -+#define TEMPADCPNP2 0x050 -+#define TEMPADCPNP3 0x0b4 -+ -+#define TEMPADCMUX 0x054 -+#define TEMPADCEXT 0x058 -+#define TEMPADCEXT1 0x05c -+#define TEMPADCEN 0x060 -+#define TEMPPNPMUXADDR 0x064 -+#define TEMPADCMUXADDR 0x068 -+#define TEMPADCEXTADDR 0x06c -+#define TEMPADCEXT1ADDR 0x070 -+#define TEMPADCENADDR 0x074 -+#define TEMPADCVALIDADDR 0x078 -+#define TEMPADCVOLTADDR 0x07c -+#define TEMPRDCTRL 0x080 -+#define TEMPADCVALIDMASK 0x084 -+#define TEMPADCVOLTAGESHIFT 0x088 -+#define TEMPADCWRITECTRL 0x08c -+#define TEMPMSR0 0x090 -+#define TEMPMSR1 0x094 -+#define TEMPMSR2 0x098 -+#define TEMPMSR3 0x0B8 -+ -+#define TEMPIMMD0 0x0a0 -+#define TEMPIMMD1 0x0a4 -+#define TEMPIMMD2 0x0a8 -+ -+#define TEMPPROTCTL 0x0c0 -+#define TEMPPROTTA 0x0c4 -+#define TEMPPROTTB 0x0c8 -+#define TEMPPROTTC 0x0cc -+ -+#define TEMPSPARE0 0x0f0 -+#define TEMPSPARE1 0x0f4 -+#define TEMPSPARE2 0x0f8 -+#define TEMPSPARE3 0x0fc -+ -+#define PTPCORESEL 0x400 -+#define THERMINTST 0x404 -+#define PTPODINTST 0x408 -+#define THSTAGE0ST 0x40c -+#define THSTAGE1ST 0x410 -+#define THSTAGE2ST 0x414 -+#define THAHBST0 0x418 -+#define THAHBST1 0x41c /* Only for DE debug */ -+#define PTPSPARE0 0x420 -+#define PTPSPARE1 0x424 -+#define PTPSPARE2 0x428 -+#define PTPSPARE3 0x42c -+#define THSLPEVEB 0x430 -+ -+#define TEMPMONINT_COLD(sp) ((1 << 0) << ((sp) * 5)) -+#define TEMPMONINT_HOT(sp) ((1 << 1) << ((sp) * 5)) -+#define TEMPMONINT_LOW_OFS(sp) ((1 << 2) << ((sp) * 5)) -+#define TEMPMONINT_HIGH_OFS(sp) ((1 << 3) << ((sp) * 5)) -+#define TEMPMONINT_HOT_TO_NORM(sp) ((1 << 4) << ((sp) * 5)) -+#define TEMPMONINT_TIMEOUT (1 << 15) -+#define TEMPMONINT_IMMEDIATE_SENSE(sp) (1 << (16 + (sp))) -+#define TEMPMONINT_FILTER_SENSE(sp) (1 << (19 + (sp))) -+ -+#define TEMPADCWRITECTRL_ADC_PNP_WRITE (1 << 0) -+#define TEMPADCWRITECTRL_ADC_MUX_WRITE (1 << 1) -+#define TEMPADCWRITECTRL_ADC_EXTRA_WRITE (1 << 2) -+#define TEMPADCWRITECTRL_ADC_EXTRA1_WRITE (1 << 3) -+ -+#define TEMPADCVALIDMASK_VALID_HIGH (1 << 5) -+#define TEMPADCVALIDMASK_VALID_POS(bit) (bit) -+ -+#define TEMPPROTCTL_AVERAGE (0 << 16) -+#define TEMPPROTCTL_MAXIMUM (1 << 16) -+#define TEMPPROTCTL_SELECTED (2 << 16) -+ -+#define MT8173_THERMAL_ZONE_CA57 0 -+#define MT8173_THERMAL_ZONE_CA53 1 -+#define MT8173_THERMAL_ZONE_GPU 2 -+#define MT8173_THERMAL_ZONE_CORE 3 -+ -+#define MT8173_TS1 0 -+#define MT8173_TS2 1 -+#define MT8173_TS3 2 -+#define MT8173_TS4 3 -+#define MT8173_TSABB 4 -+ -+/* AUXADC channel 11 is used for the temperature sensors */ -+#define MT8173_TEMP_AUXADC_CHANNEL 11 -+ -+/* The total number of temperature sensors in the MT8173 */ -+#define MT8173_NUM_SENSORS 5 -+ -+/* The number of banks in the MT8173 */ -+#define MT8173_NUM_BANKS 4 -+ -+/* The number of sensing points per bank */ -+#define MT8173_NUM_SENSING_POINTS 4 -+ -+#define THERMAL_NAME "mtk-thermal" -+ -+struct mtk_thermal; -+ -+struct mtk_thermal_bank { -+ struct mtk_thermal *mt; -+ struct thermal_zone_device *tz; -+ int id; -+}; -+ -+struct mtk_thermal { -+ struct device *dev; -+ void __iomem *thermal_base; -+ void __iomem *auxadc_base; -+ -+ u64 auxadc_phys_base; -+ u64 apmixed_phys_base; -+ struct reset_control *reset; -+ struct clk *clk_peri_therm; -+ struct clk *clk_auxadc; -+ -+ struct mtk_thermal_bank banks[MT8173_NUM_BANKS]; -+ -+ struct mutex lock; -+ -+ /* Calibration values */ -+ s32 adc_ge; -+ s32 adc_oe; -+ s32 degc_cali; -+ s32 o_slope; -+ s32 vts; -+}; -+ -+struct mtk_thermal_bank_cfg { -+ unsigned int enable_mask; -+ unsigned int sensors[4]; -+}; -+ -+static int sensor_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; -+ -+/* -+ * The MT8173 thermal controller has four banks. Each bank can read up to -+ * four temperature sensors simultaneously. The MT8173 has a total of 5 -+ * temperature sensors. We use each bank to measure a certain area of the -+ * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple -+ * areas, hence is used in different banks. -+ */ -+static struct mtk_thermal_bank_cfg bank_data[] = { -+ { -+ .enable_mask = 3, -+ .sensors = { MT8173_TS2, MT8173_TS3 }, -+ }, { -+ .enable_mask = 3, -+ .sensors = { MT8173_TS2, MT8173_TS4 }, -+ }, { -+ .enable_mask = 7, -+ .sensors = { MT8173_TS1, MT8173_TS2, MT8173_TSABB }, -+ }, { -+ .enable_mask = 1, -+ .sensors = { MT8173_TS2 }, -+ }, -+}; -+ -+static int tempmsr_ofs[MT8173_NUM_SENSING_POINTS] = { -+ TEMPMSR0, TEMPMSR1, TEMPMSR2, TEMPMSR3 -+}; -+ -+static int tempadcpnp_ofs[MT8173_NUM_SENSING_POINTS] = { -+ TEMPADCPNP0, TEMPADCPNP1, TEMPADCPNP2, TEMPADCPNP3 -+}; -+ -+/** -+ * raw_to_mcelsius - convert a raw ADC value to mcelsius -+ * @mt: The thermal controller -+ * @raw: raw ADC value -+ * -+ * This converts the raw ADC value to mcelsius using the SoC specific -+ * calibration constants -+ */ -+static int raw_to_mcelsius(struct mtk_thermal *mt, u32 raw) -+{ -+ s32 format_1, format_2, format_3, format_4; -+ s32 xtoomt; -+ s32 gain; -+ -+ raw &= 0xfff; -+ -+ gain = (10000 + mt->adc_ge); -+ -+ xtoomt = ((((mt->vts + 3350 - mt->adc_oe) * 10000) / 4096) * 10000) / -+ gain; -+ -+ format_1 = ((mt->degc_cali * 10) >> 1); -+ format_2 = (raw - mt->adc_oe); -+ format_3 = (((((format_2) * 10000) >> 12) * 10000) / gain) - xtoomt; -+ format_3 = format_3 * 15 / 18; -+ format_4 = ((format_3 * 100) / (165 + mt->o_slope)); -+ format_4 = format_4 - (format_4 << 1); -+ -+ return (format_1 + format_4) * 100; -+} -+ -+/** -+ * mcelsius_to_raw - convert mcelsius to raw ADC value -+ * @mt: The thermal controller -+ * @temp: The temperature in mcelsius -+ * -+ * This converts a temperature in mcelsius to a raw ADC value, needed to -+ * calculate the trigger values for interrupt generation. -+ */ -+static u32 mcelsius_to_raw(struct mtk_thermal *mt, int temp) -+{ -+ s32 format_1, format_2, format_3, format_4; -+ s32 xtoomt; -+ s32 gain; -+ -+ gain = (10000 + mt->adc_ge); -+ -+ xtoomt = ((((mt->vts + 3350 - mt->adc_oe) * 10000) / 4096) * 10000) / -+ gain; -+ -+ format_1 = temp - (mt->degc_cali * 1000 / 2); -+ format_2 = format_1 * (165 + mt->o_slope) * 18 / 15; -+ format_2 = format_2 - 2 * format_2; -+ format_3 = format_2 / 1000 + xtoomt * 10; -+ format_4 = (format_3 * 4096 / 10000 * gain) / 100000 + mt->adc_oe; -+ -+ return format_4; -+} -+ -+/** -+ * mtk_thermal_get_bank - get bank -+ * @bank: The bank -+ * -+ * The bank registers are banked, we have to select a bank in the -+ * PTPCORESEL register to access it. -+ */ -+static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank) -+{ -+ struct mtk_thermal *mt = bank->mt; -+ u32 val; -+ -+ mutex_lock(&mt->lock); -+ -+ val = readl(mt->thermal_base + PTPCORESEL); -+ val &= ~0xf; -+ val |= bank->id; -+ writel(val, mt->thermal_base + PTPCORESEL); -+} -+ -+/** -+ * mtk_thermal_put_bank - release bank -+ * @bank: The bank -+ * -+ * release a bank previously taken with mtk_thermal_get_bank, -+ */ -+static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank) -+{ -+ struct mtk_thermal *mt = bank->mt; -+ -+ mutex_unlock(&mt->lock); -+} -+ -+/** -+ * mtk_thermal_bank_temperature - get the temperature of a bank -+ * @bank: The bank -+ * -+ * The temperature of a bank is considered the maximum temperature of -+ * the sensors associated to the bank. -+ */ -+static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) -+{ -+ struct mtk_thermal *mt = bank->mt; -+ int temp, i, max; -+ u32 raw; -+ -+ temp = max = -INT_MAX; -+ -+ for (i = 0; i < 4; i++) { -+ int sensno; -+ -+ if (!(bank_data[bank->id].enable_mask & (1 << i))) -+ continue; -+ -+ raw = readl(mt->thermal_base + tempmsr_ofs[i]); -+ -+ sensno = bank_data[bank->id].sensors[i]; -+ temp = raw_to_mcelsius(mt, raw); -+ -+ if (temp > max) -+ max = temp; -+ } -+ -+ return max; -+} -+ -+static void mtk_thermal_irq_bank(struct mtk_thermal_bank *bank) -+{ -+ struct mtk_thermal *mt = bank->mt; -+ int sp; -+ u32 irqstat; -+ bool update = false; -+ -+ mtk_thermal_get_bank(bank); -+ -+ irqstat = readl(mt->thermal_base + TEMPMONINTSTS); -+ -+ mtk_thermal_put_bank(bank); -+ -+ for (sp = 0; sp < 3; sp++) { -+ if (irqstat & TEMPMONINT_LOW_OFS(sp)) { -+ update = true; -+ dev_vdbg(mt->dev, "bank %d sensor %d low offset interrupt\n", -+ bank->id, sp); -+ } -+ -+ if (irqstat & TEMPMONINT_HIGH_OFS(sp)) { -+ update = true; -+ dev_vdbg(mt->dev, "bank %d sensor %d high offset interrupt\n", -+ bank->id, sp); -+ } -+ } -+ -+ if (update) -+ thermal_zone_device_update(bank->tz); -+} -+ -+static irqreturn_t mtk_thermal_irq(int irq, void *dev_id) -+{ -+ struct mtk_thermal *mt = dev_id; -+ u32 irqstat = 0; -+ int i; -+ -+ irqstat = readl(mt->thermal_base + THERMINTST); -+ -+ dev_vdbg(mt->dev, "thermal_interrupt_handler : THERMINTST = 0x%x\n", -+ irqstat); -+ -+ for (i = 0; i < MT8173_NUM_BANKS; i++) { -+ if (!(irqstat & (1 << i))) -+ mtk_thermal_irq_bank(&mt->banks[i]); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static int mtk_read_temp(void *data, int *temp) -+{ -+ struct mtk_thermal_bank *bank = data; -+ -+ mtk_thermal_get_bank(bank); -+ -+ *temp = mtk_thermal_bank_temperature(bank); -+ -+ mtk_thermal_put_bank(bank); -+ -+ return 0; -+} -+ -+static int mtk_set_trips(void *data, int low, int high) -+{ -+ struct mtk_thermal_bank *bank = data; -+ struct mtk_thermal *mt = bank->mt; -+ int i; -+ u32 val, enable_mask; -+ u32 raw_low, raw_high; -+ -+ raw_low = mcelsius_to_raw(mt, low); -+ raw_high = mcelsius_to_raw(mt, high); -+ -+ mtk_thermal_get_bank(bank); -+ -+ writel(0x0, mt->thermal_base + TEMPMONINT); -+ -+ writel(TEMPPROTCTL_SELECTED, mt->thermal_base + TEMPPROTCTL); -+ -+ writel(raw_low, mt->thermal_base + TEMPOFFSETL); -+ writel(raw_high, mt->thermal_base + TEMPOFFSETH); -+ -+ enable_mask = readl(mt->thermal_base + TEMPMONCTL0); -+ -+ val = 0; -+ for (i = 0; i < MT8173_NUM_SENSING_POINTS; i++) -+ if (enable_mask & (1 << i)) -+ val |= TEMPMONINT_LOW_OFS(i) | TEMPMONINT_HIGH_OFS(i); -+ -+ writel(val, mt->thermal_base + TEMPMONINT); -+ -+ mtk_thermal_put_bank(bank); -+ -+ dev_dbg(mt->dev, "new boundaries: %d (0x%04x) < x < %d (0x%04x)\n", -+ low, mcelsius_to_raw(mt, low), -+ high, mcelsius_to_raw(mt, high)); -+ -+ return 0; -+} -+ -+static const struct thermal_zone_of_device_ops mtk_thermal_ops = { -+ .get_temp = mtk_read_temp, -+ .set_trips = mtk_set_trips, -+}; -+ -+static void mtk_thermal_init_bank(struct mtk_thermal_bank *bank) -+{ -+ struct mtk_thermal *mt = bank->mt; -+ struct mtk_thermal_bank_cfg *cfg = &bank_data[bank->id]; -+ int i; -+ -+ mtk_thermal_get_bank(bank); -+ -+ /* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */ -+ writel(0x0000000c, mt->thermal_base + TEMPMONCTL1); -+ -+ /* -+ * filt interval is 1 * 46.540us = 46.54us, -+ * sen interval is 429 * 46.540us = 19.96ms -+ */ -+ writel(0x000101ad, mt->thermal_base + TEMPMONCTL2); -+ -+ /* poll is set to 10u */ -+ writel(0x00000300, mt->thermal_base + TEMPAHBPOLL); -+ -+ /* temperature sampling control, 1 sample */ -+ writel(0x00000000, mt->thermal_base + TEMPMSRCTL0); -+ -+ /* exceed this polling time, IRQ would be inserted */ -+ writel(0xffffffff, mt->thermal_base + TEMPAHBTO); -+ -+ /* number of interrupts per event, 1 is enough */ -+ writel(0x0, mt->thermal_base + TEMPMONIDET0); -+ writel(0x0, mt->thermal_base + TEMPMONIDET1); -+ -+ /* -+ * The MT8173 thermal controller does not have its own ADC. Instead it -+ * uses AHB bus accesses to control the AUXADC. To do this the thermal -+ * controller has to be programmed with the physical addresses of the -+ * AUXADC registers and with the various bit positions in the AUXADC. -+ * Also the thermal controller controls a mux in the APMIXEDSYS register -+ * space. -+ */ -+ -+ /* -+ * this value will be stored to TEMPPNPMUXADDR (TEMPSPARE0) -+ * automatically by hw -+ */ -+ writel(1 << MT8173_TEMP_AUXADC_CHANNEL, mt->thermal_base + TEMPADCMUX); -+ -+ /* AHB address for auxadc mux selection */ -+ writel(mt->auxadc_phys_base + 0x00c, -+ mt->thermal_base + TEMPADCMUXADDR); -+ -+ /* AHB address for pnp sensor mux selection */ -+ writel(mt->apmixed_phys_base + 0x0604, -+ mt->thermal_base + TEMPPNPMUXADDR); -+ -+ /* AHB value for auxadc enable */ -+ writel(1 << MT8173_TEMP_AUXADC_CHANNEL, mt->thermal_base + TEMPADCEN); -+ -+ /* AHB address for auxadc enable (channel 0 immediate mode selected) */ -+ writel(mt->auxadc_phys_base + AUXADC_CON1_SET_V, -+ mt->thermal_base + TEMPADCENADDR); -+ -+ /* AHB address for auxadc valid bit */ -+ writel(mt->auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), -+ mt->thermal_base + TEMPADCVALIDADDR); -+ -+ /* AHB address for auxadc voltage output */ -+ writel(mt->auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), -+ mt->thermal_base + TEMPADCVOLTADDR); -+ -+ /* read valid & voltage are at the same register */ -+ writel(0x0, mt->thermal_base + TEMPRDCTRL); -+ -+ /* indicate where the valid bit is */ -+ writel(TEMPADCVALIDMASK_VALID_HIGH | TEMPADCVALIDMASK_VALID_POS(12), -+ mt->thermal_base + TEMPADCVALIDMASK); -+ -+ /* no shift */ -+ writel(0x0, mt->thermal_base + TEMPADCVOLTAGESHIFT); -+ -+ /* enable auxadc mux write transaction */ -+ writel(TEMPADCWRITECTRL_ADC_MUX_WRITE, -+ mt->thermal_base + TEMPADCWRITECTRL); -+ -+ for (i = 0; i < MT8173_NUM_SENSING_POINTS; i++) -+ writel(sensor_mux_values[cfg->sensors[i]], -+ mt->thermal_base + tempadcpnp_ofs[i]); -+ -+ writel(cfg->enable_mask, mt->thermal_base + TEMPMONCTL0); -+ -+ writel(TEMPADCWRITECTRL_ADC_PNP_WRITE | TEMPADCWRITECTRL_ADC_MUX_WRITE, -+ mt->thermal_base + TEMPADCWRITECTRL); -+ -+ mtk_thermal_put_bank(bank); -+} -+ -+static u64 of_get_phys_base(struct device_node *np) -+{ -+ u64 size64; -+ const __be32 *regaddr_p; -+ -+ regaddr_p = of_get_address(np, 0, &size64, NULL); -+ if (!regaddr_p) -+ return OF_BAD_ADDR; -+ -+ return of_translate_address(np, regaddr_p); -+} -+ -+static int mtk_thermal_probe(struct platform_device *pdev) -+{ -+ int ret, i; -+ struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; -+ int irq; -+ struct mtk_thermal *mt; -+ struct resource *res; -+ -+ mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL); -+ if (!mt) -+ return -ENOMEM; -+ -+ mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm"); -+ if (IS_ERR(mt->clk_peri_therm)) -+ return PTR_ERR(mt->clk_peri_therm); -+ -+ mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc"); -+ if (IS_ERR(mt->clk_auxadc)) -+ return PTR_ERR(mt->clk_auxadc); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ mt->thermal_base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mt->thermal_base)) -+ return PTR_ERR(mt->thermal_base); -+ -+ mt->reset = devm_reset_control_get(&pdev->dev, "therm"); -+ if (IS_ERR(mt->reset)) { -+ ret = PTR_ERR(mt->reset); -+ dev_err(&pdev->dev, "cannot get reset: %d\n", ret); -+ return ret; -+ } -+ -+ mutex_init(&mt->lock); -+ -+ mt->dev = &pdev->dev; -+ -+ auxadc = of_parse_phandle(np, "auxadc", 0); -+ if (!auxadc) { -+ dev_err(&pdev->dev, "missing auxadc node\n"); -+ return -ENODEV; -+ } -+ -+ mt->auxadc_phys_base = of_get_phys_base(auxadc); -+ if (mt->auxadc_phys_base == OF_BAD_ADDR) { -+ dev_err(&pdev->dev, "Can't get auxadc phys address\n"); -+ return -EINVAL; -+ } -+ -+ apmixedsys = of_parse_phandle(np, "apmixedsys", 0); -+ if (!apmixedsys) { -+ dev_err(&pdev->dev, "missing apmixedsys node\n"); -+ return -ENODEV; -+ } -+ -+ mt->apmixed_phys_base = of_get_phys_base(apmixedsys); -+ if (mt->apmixed_phys_base == OF_BAD_ADDR) { -+ dev_err(&pdev->dev, "Can't get auxadc phys address\n"); -+ return -EINVAL; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (!irq) { -+ dev_err(&pdev->dev, "Can't find irq\n"); -+ return -EINVAL; -+ } -+ -+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, mtk_thermal_irq, -+ IRQF_ONESHOT, THERMAL_NAME, mt); -+ if (ret) { -+ dev_err(&pdev->dev, "Can't request irq %d: %d\n", irq, ret); -+ return ret; -+ } -+ -+ ret = clk_prepare_enable(mt->clk_auxadc); -+ if (ret) { -+ dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret); -+ return ret; -+ } -+ -+ reset_control_reset(mt->reset); -+ -+ ret = clk_prepare_enable(mt->clk_peri_therm); -+ if (ret) { -+ dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret); -+ goto err_enable_clk; -+ } -+ -+ /* -+ * These calibration values should finally be provided by the -+ * firmware or fuses. For now use default values. -+ */ -+ mt->adc_ge = ((512 - 512) * 10000) / 4096; -+ mt->adc_oe = 512 - 512; -+ mt->degc_cali = 40; -+ mt->o_slope = 0; -+ mt->vts = 260; -+ -+ for (i = 0; i < MT8173_NUM_BANKS; i++) { -+ struct mtk_thermal_bank *bank = &mt->banks[i]; -+ -+ bank->id = i; -+ bank->mt = mt; -+ mtk_thermal_init_bank(&mt->banks[i]); -+ } -+ -+ platform_set_drvdata(pdev, mt); -+ -+ /* -+ * This is needed after initialising the banks because otherwise -+ * the first temperature read contains bogus high temperatures which -+ * immediately cause a system shutdown. -+ */ -+ msleep(100); -+ -+ for (i = 0; i < MT8173_NUM_BANKS; i++) { -+ struct mtk_thermal_bank *bank = &mt->banks[i]; -+ -+ bank->tz = thermal_zone_of_sensor_register(&pdev->dev, i, bank, -+ &mtk_thermal_ops); -+ } -+ -+ return 0; -+ -+err_enable_clk: -+ clk_disable_unprepare(mt->clk_peri_therm); -+ -+ return ret; -+} -+ -+static int mtk_thermal_remove(struct platform_device *pdev) -+{ -+ struct mtk_thermal *mt = platform_get_drvdata(pdev); -+ int i; -+ -+ for (i = 0; i < MT8173_NUM_BANKS; i++) { -+ struct mtk_thermal_bank *bank = &mt->banks[i]; -+ -+ if (!IS_ERR(bank)) -+ thermal_zone_of_sensor_unregister(&pdev->dev, bank->tz); -+ } -+ -+ clk_disable_unprepare(mt->clk_peri_therm); -+ clk_disable_unprepare(mt->clk_auxadc); -+ -+ return 0; -+} -+ -+static const struct of_device_id mtk_thermal_of_match[] = { -+ { -+ .compatible = "mediatek,mt8173-thermal", -+ }, { -+ }, -+}; -+ -+static struct platform_driver mtk_thermal_driver = { -+ .probe = mtk_thermal_probe, -+ .remove = mtk_thermal_remove, -+ .driver = { -+ .name = THERMAL_NAME, -+ .of_match_table = mtk_thermal_of_match, -+ }, -+}; -+ -+module_platform_driver(mtk_thermal_driver); |