mpc83xx: remove 3.6 support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35112

1 files changed, 0 insertions, 279 deletions

diff --git a/target/linux/mpc83xx/patches-3.6/203-mtd-add-rbppc_nand-driver.patch b/target/linux/mpc83xx/patches-3.6/203-mtd-add-rbppc_nand-driver.patch
deleted file mode 100644
index f67aa7b..0000000
--- a/target/linux/mpc83xx/patches-3.6/203-mtd-add-rbppc_nand-driver.patch
+++ /dev/null
@@ -1,279 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -497,6 +497,13 @@ config MTD_NAND_PLATFORM
- 	  devices. You will need to provide platform-specific functions
- 	  via platform_data.
- 
-+config MTD_NAND_RB_PPC
-+	tristate "MikroTik RB333/600 NAND support"
-+	depends on RB_PPC
-+	help
-+	  This option enables support for the NAND device on MikroTik
-+	  RouterBOARD 333/600 series boards.
-+
- config MTD_ALAUDA
- 	tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
- 	depends on USB
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB_PPC)		+= rbppc_nand.o
- obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
---- /dev/null
-+++ b/drivers/mtd/nand/rbppc_nand.c
-@@ -0,0 +1,250 @@
-+/*
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+
-+#define DRV_NAME	"rbppc_nand"
-+#define DRV_VERSION	"0.0.2"
-+
-+static struct mtd_info rmtd;
-+static struct nand_chip rnand;
-+
-+struct rbppc_nand_info {
-+	void *gpi;
-+	void *gpo;
-+	void *localbus;
-+
-+	unsigned gpio_rdy;
-+	unsigned gpio_nce;
-+	unsigned gpio_cle;
-+	unsigned gpio_ale;
-+	unsigned gpio_ctrls;
-+};
-+
-+/* We must use the OOB layout from yaffs 1 if we want this to be recognized
-+ * properly. Borrowed from the OpenWRT patches for the RB532.
-+ *
-+ * See <https://dev.openwrt.org/browser/trunk/target/linux/rb532/
-+ * patches-2.6.28/025-rb532_nand_fixup.patch> for more details.
-+ */
-+static struct nand_ecclayout rbppc_nand_oob_16 = {
-+	.eccbytes = 6,
-+	.eccpos = { 8, 9, 10, 13, 14, 15 },
-+	.oobavail = 9,
-+	.oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-+};
-+
-+static struct mtd_partition rbppc_nand_partition_info[] = {
-+	{
-+		name: "kernel",
-+		offset: 0,
-+		size: 4 * 1024 * 1024,
-+	},
-+	{
-+		name: "rootfs",
-+		offset: MTDPART_OFS_NXTBLK,
-+		size: MTDPART_SIZ_FULL,
-+	},
-+};
-+
-+static int rbppc_nand_dev_ready(struct mtd_info *mtd) {
-+	struct nand_chip *chip = mtd->priv;
-+	struct rbppc_nand_info *priv = chip->priv;
-+
-+	return in_be32(priv->gpi) & priv->gpio_rdy;
-+}
-+
-+static void rbppc_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) {
-+	struct nand_chip *chip = mtd->priv;
-+	struct rbppc_nand_info *priv = chip->priv;
-+
-+	if (ctrl & NAND_CTRL_CHANGE) {
-+		unsigned val = in_be32(priv->gpo);
-+		if (!(val & priv->gpio_nce)) {
-+			/* make sure Local Bus has done NAND operations */
-+			readb(priv->localbus);
-+		}
-+
-+		if (ctrl & NAND_CLE) {
-+			val |= priv->gpio_cle;
-+		} else {
-+			val &= ~priv->gpio_cle;
-+		}
-+		if (ctrl & NAND_ALE) {
-+			val |= priv->gpio_ale;
-+		} else {
-+			val &= ~priv->gpio_ale;
-+		}
-+		if (!(ctrl & NAND_NCE)) {
-+			val |= priv->gpio_nce;
-+		} else {
-+			val &= ~priv->gpio_nce;
-+		}
-+		out_be32(priv->gpo, val);
-+
-+		/* make sure GPIO output has changed */
-+		val ^= in_be32(priv->gpo);
-+		if (val & priv->gpio_ctrls) {
-+			printk(KERN_ERR "rbppc_nand_hwcontrol: NAND GPO change failed 0x%08x\n", val);
-+		}
-+	}
-+
-+	if (cmd != NAND_CMD_NONE) writeb(cmd, chip->IO_ADDR_W);
-+}
-+
-+static void rbppc_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-+{
-+	struct nand_chip *chip = mtd->priv;
-+	memcpy(buf, chip->IO_ADDR_R, len);
-+}
-+
-+static unsigned init_ok = 0;
-+
-+static int __devinit rbppc_nand_probe(struct platform_device *pdev)
-+{
-+	struct device_node *gpio;
-+	struct device_node *nnand;
-+	struct resource res;
-+	struct rbppc_nand_info *info;
-+	void *baddr;
-+	const unsigned *rdy, *nce, *cle, *ale;
-+
-+	printk(KERN_INFO "rbppc_nand_probe: MikroTik RouterBOARD 333/600 series NAND driver, version " DRV_VERSION "\n");
-+
-+	info = kmalloc(sizeof(*info), GFP_KERNEL);
-+
-+	rdy = of_get_property(pdev->dev.of_node, "rdy", NULL);
-+	nce = of_get_property(pdev->dev.of_node, "nce", NULL);
-+	cle = of_get_property(pdev->dev.of_node, "cle", NULL);
-+	ale = of_get_property(pdev->dev.of_node, "ale", NULL);
-+
-+	if (!rdy || !nce || !cle || !ale) {
-+		printk(KERN_ERR "rbppc_nand_probe: GPIO properties are missing\n");
-+		goto err;
-+	}
-+	if (rdy[0] != nce[0] || rdy[0] != cle[0] || rdy[0] != ale[0]) {
-+		printk(KERN_ERR "rbppc_nand_probe: Different GPIOs are not supported\n");
-+		goto err;
-+	}
-+
-+	gpio = of_find_node_by_phandle(rdy[0]);
-+	if (!gpio) {
-+		printk(KERN_ERR "rbppc_nand_probe: No GPIO<%x> node found\n", *rdy);
-+		goto err;
-+	}
-+	if (of_address_to_resource(gpio, 0, &res)) {
-+		printk(KERN_ERR "rbppc_nand_probe: No reg property in GPIO found\n");
-+		goto err;
-+	}
-+	info->gpo = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+	if (!of_address_to_resource(gpio, 1, &res)) {
-+		info->gpi = ioremap_nocache(res.start, res.end - res.start + 1);
-+	} else {
-+		info->gpi = info->gpo;
-+	}
-+	of_node_put(gpio);
-+
-+	info->gpio_rdy = 1 << (31 - rdy[1]);
-+	info->gpio_nce = 1 << (31 - nce[1]);
-+	info->gpio_cle = 1 << (31 - cle[1]);
-+	info->gpio_ale = 1 << (31 - ale[1]);
-+	info->gpio_ctrls = info->gpio_nce | info->gpio_cle | info->gpio_ale;
-+
-+	nnand = of_find_node_by_name(NULL, "nnand");
-+	if (!nnand) {
-+		printk("rbppc_nand_probe: No nNAND found\n");
-+		goto err;
-+	}
-+	if (of_address_to_resource(nnand, 0, &res)) {
-+		printk("rbppc_nand_probe: No reg property in nNAND found\n");
-+		goto err;
-+	}
-+	of_node_put(nnand);
-+	info->localbus = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+	if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
-+	    printk("rbppc_nand_probe: No reg property found\n");
-+	    goto err;
-+	}
-+	baddr = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+	memset(&rnand, 0, sizeof(rnand));
-+	rnand.cmd_ctrl = rbppc_nand_cmd_ctrl;
-+	rnand.dev_ready = rbppc_nand_dev_ready;
-+	rnand.read_buf = rbppc_nand_read_buf;
-+	rnand.IO_ADDR_W = baddr;
-+	rnand.IO_ADDR_R = baddr;
-+	rnand.priv = info;
-+
-+	memset(&rmtd, 0, sizeof(rmtd));
-+	rnand.ecc.mode = NAND_ECC_SOFT;
-+	rnand.ecc.layout = &rbppc_nand_oob_16;
-+	rnand.chip_delay = 25;
-+	rmtd.priv = &rnand;
-+	rmtd.owner = THIS_MODULE;
-+
-+	if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
-+		printk(KERN_ERR "rbppc_nand_probe: RouterBOARD NAND device not found\n");
-+		return -ENXIO;
-+	}
-+
-+	mtd_device_parse_register(&rmtd, NULL, 0, rbppc_nand_partition_info, 2);
-+	init_ok = 1;
-+	return 0;
-+
-+err:
-+	kfree(info);
-+	return -1;
-+}
-+
-+static struct of_device_id rbppc_nand_ids[] = {
-+	{ .name = "nand", },
-+	{ },
-+};
-+
-+static struct platform_driver rbppc_nand_driver = {
-+	.probe	= rbppc_nand_probe,
-+	.driver	= {
-+		.name = "rbppc-nand",
-+		.owner = THIS_MODULE,
-+		.of_match_table = rbppc_nand_ids,
-+	},
-+};
-+
-+static int __init rbppc_nand_init(void)
-+{
-+	return platform_driver_register(&rbppc_nand_driver);
-+}
-+
-+static void __exit rbppc_nand_exit(void)
-+{
-+	platform_driver_unregister(&rbppc_nand_driver);
-+}
-+
-+MODULE_AUTHOR("Mikrotikls SIA");
-+MODULE_AUTHOR("Noah Fontes");
-+MODULE_AUTHOR("Michael Guntsche");
-+MODULE_DESCRIPTION("MikroTik RouterBOARD 333/600 series NAND driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(rbppc_nand_init);
-+module_exit(rbppc_nand_exit);