mpc85xx: move newly created files from patch files to files directory

This will make these files much more maintainable.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45597

1 files changed, 0 insertions, 537 deletions

diff --git a/target/linux/mpc85xx/patches-3.18/140-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-3.18/140-powerpc-85xx-tl-wdr4900-v1-support.patch
index 6a6eeac..9b4815c 100644
--- a/target/linux/mpc85xx/patches-3.18/140-powerpc-85xx-tl-wdr4900-v1-support.patch
+++ b/target/linux/mpc85xx/patches-3.18/140-powerpc-85xx-tl-wdr4900-v1-support.patch
@@ -11,16 +11,9 @@ the Freescale P1014 SoC.
 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
 ---
  arch/powerpc/boot/Makefile                  |   3 +
- arch/powerpc/boot/cuboot-tl-wdr4900-v1.c    | 164 +++++++++++++++++++++
- arch/powerpc/boot/dts/tl-wdr4900-v1.dts     | 212 ++++++++++++++++++++++++++++
  arch/powerpc/boot/wrapper                   |   4 +
  arch/powerpc/platforms/85xx/Kconfig         |  11 ++
  arch/powerpc/platforms/85xx/Makefile        |   1 +
- arch/powerpc/platforms/85xx/tl_wdr4900_v1.c | 145 +++++++++++++++++++
- 7 files changed, 540 insertions(+)
- create mode 100644 arch/powerpc/boot/cuboot-tl-wdr4900-v1.c
- create mode 100644 arch/powerpc/boot/dts/tl-wdr4900-v1.dts
- create mode 100644 arch/powerpc/platforms/85xx/tl_wdr4900_v1.c
 
 --- a/arch/powerpc/boot/Makefile
 +++ b/arch/powerpc/boot/Makefile
@@ -40,388 +33,6 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  
  # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
  image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
---- /dev/null
-+++ b/arch/powerpc/boot/cuboot-tl-wdr4900-v1.c
-@@ -0,0 +1,164 @@
-+/*
-+ * U-Boot compatibility wrapper for the TP-Link TL-WDR4900 v1 board
-+ *
-+ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Based on:
-+ *  cuboot-85xx.c
-+ *     Author: Scott Wood <scottwood@freescale.com>
-+ *     Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ *  simpleboot.c
-+ *     Authors: Scott Wood <scottwood@freescale.com>
-+ *              Grant Likely <grant.likely@secretlab.ca>
-+ *     Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *     Copyright (c) 2008 Secret Lab Technologies Ltd.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "types.h"
-+#include "io.h"
-+#include "stdio.h"
-+#include <libfdt.h>
-+
-+BSS_STACK(4*1024);
-+
-+static unsigned long bus_freq;
-+static unsigned long int_freq;
-+static u64 mem_size;
-+static unsigned char enetaddr[6];
-+
-+static void process_boot_dtb(void *boot_dtb)
-+{
-+	const u32 *na, *ns, *reg, *val32;
-+	const char *path;
-+	u64 memsize64;
-+	int node, size, i;
-+
-+	/* Make sure FDT blob is sane */
-+	if (fdt_check_header(boot_dtb) != 0)
-+		fatal("Invalid device tree blob\n");
-+
-+	/* Find the #address-cells and #size-cells properties */
-+	node = fdt_path_offset(boot_dtb, "/");
-+	if (node < 0)
-+		fatal("Cannot find root node\n");
-+	na = fdt_getprop(boot_dtb, node, "#address-cells", &size);
-+	if (!na || (size != 4))
-+		fatal("Cannot find #address-cells property");
-+
-+	ns = fdt_getprop(boot_dtb, node, "#size-cells", &size);
-+	if (!ns || (size != 4))
-+		fatal("Cannot find #size-cells property");
-+
-+	/* Find the memory range */
-+	node = fdt_node_offset_by_prop_value(boot_dtb, -1, "device_type",
-+					     "memory", sizeof("memory"));
-+	if (node < 0)
-+		fatal("Cannot find memory node\n");
-+	reg = fdt_getprop(boot_dtb, node, "reg", &size);
-+	if (size < (*na+*ns) * sizeof(u32))
-+		fatal("cannot get memory range\n");
-+
-+	/* Only interested in memory based at 0 */
-+	for (i = 0; i < *na; i++)
-+		if (*reg++ != 0)
-+			fatal("Memory range is not based at address 0\n");
-+
-+	/* get the memsize and trucate it to under 4G on 32 bit machines */
-+	memsize64 = 0;
-+	for (i = 0; i < *ns; i++)
-+		memsize64 = (memsize64 << 32) | *reg++;
-+	if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
-+		memsize64 = 0xffffffff;
-+
-+	mem_size = memsize64;
-+
-+	/* get clock frequencies */
-+	node = fdt_node_offset_by_prop_value(boot_dtb, -1, "device_type",
-+					     "cpu", sizeof("cpu"));
-+	if (!node)
-+		fatal("Cannot find cpu node\n");
-+
-+	val32 = fdt_getprop(boot_dtb, node, "clock-frequency", &size);
-+	if (!val32 || (size != 4))
-+		fatal("Cannot get clock frequency");
-+
-+	int_freq = *val32;
-+
-+	val32 = fdt_getprop(boot_dtb, node, "bus-frequency", &size);
-+	if (!val32 || (size != 4))
-+		fatal("Cannot get bus frequency");
-+
-+	bus_freq = *val32;
-+
-+	path = fdt_get_alias(boot_dtb, "ethernet0");
-+	if (path) {
-+		const void *p;
-+
-+		node = fdt_path_offset(boot_dtb, path);
-+		if (node < 0)
-+			fatal("Cannot find ethernet0 node");
-+
-+		p = fdt_getprop(boot_dtb, node, "mac-address", &size);
-+		if (!p || (size < 6)) {
-+			printf("no mac-address property, finding local\n\r");
-+			p = fdt_getprop(boot_dtb, node, "local-mac-address", &size);
-+		}
-+
-+		if (!p || (size < 6))
-+			fatal("cannot get MAC addres");
-+
-+		memcpy(enetaddr, p, sizeof(enetaddr));
-+	}
-+}
-+
-+static void platform_fixups(void)
-+{
-+	void *soc;
-+
-+	dt_fixup_memory(0, mem_size);
-+
-+	dt_fixup_mac_address_by_alias("ethernet0", enetaddr);
-+	dt_fixup_cpu_clocks(int_freq, bus_freq / 8, bus_freq);
-+
-+	/* Unfortunately, the specific model number is encoded in the
-+	 * soc node name in existing dts files -- once that is fixed,
-+	 * this can do a simple path lookup.
-+	 */
-+	soc = find_node_by_devtype(NULL, "soc");
-+	if (soc) {
-+		void *serial = NULL;
-+
-+		setprop(soc, "bus-frequency", &bus_freq, sizeof(bus_freq));
-+
-+		while ((serial = find_node_by_devtype(serial, "serial"))) {
-+			if (get_parent(serial) != soc)
-+				continue;
-+
-+			setprop(serial, "clock-frequency", &bus_freq,
-+				sizeof(bus_freq));
-+		}
-+	}
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+                   unsigned long r6, unsigned long r7)
-+{
-+	mem_size = 64 * 1024 * 1024;
-+
-+	simple_alloc_init(_end, mem_size - (u32)_end - 1024*1024, 32, 64);
-+
-+	fdt_init(_dtb_start);
-+	serial_console_init();
-+
-+	printf("\n\r-- TL-WDR4900 v1 boot wrapper --\n\r");
-+
-+	process_boot_dtb((void *) r3);
-+
-+	platform_ops.fixups = platform_fixups;
-+}
---- /dev/null
-+++ b/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
-@@ -0,0 +1,212 @@
-+/*
-+ * TP-Link TL-WDR4900 v1 Device Tree Source
-+ *
-+ * Copyright 2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+/include/ "fsl/p1010si-pre.dtsi"
-+
-+/ {
-+	model = "TP-Link TL-WDR4900 v1";
-+	compatible = "tp-link,TL-WDR4900v1";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+/*
-+		linux,stdout-path = "/soc@ffe00000/serial@4500";
-+*/
-+	};
-+
-+	aliases {
-+		spi0 = &spi0;
-+	};
-+
-+	memory {
-+		device_type = "memory";
-+	};
-+
-+	soc: soc@ffe00000 {
-+		ranges = <0x0 0x0 0xffe00000 0x100000>;
-+
-+		spi0: spi@7000 {
-+			flash@0 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "spansion,s25fl129p1";
-+				reg = <0>;
-+				spi-max-frequency = <25000000>;
-+
-+				u-boot@0 {
-+					reg = <0x0 0x0050000>;
-+					label = "u-boot";
-+					read-only;
-+				};
-+
-+				dtb@50000 {
-+					reg = <0x00050000 0x00010000>;
-+					label = "dtb";
-+					read-only;
-+				};
-+
-+				kernel@60000 {
-+					reg = <0x00060000 0x002a0000>;
-+					label = "kernel";
-+				};
-+
-+				rootfs@300000 {
-+					reg = <0x00300000 0x00ce0000>;
-+					label = "rootfs";
-+				};
-+
-+				config@fe0000 {
-+					reg = <0x00fe0000 0x00010000>;
-+					label = "config";
-+					read-only;
-+				};
-+
-+				caldata@ff0000 {
-+					reg = <0x00ff0000 0x00010000>;
-+					label = "caldata";
-+					read-only;
-+				};
-+
-+				firmware@60000 {
-+					reg = <0x00060000 0x00f80000>;
-+					label = "firmware";
-+				};
-+			};
-+		};
-+
-+		gpio0: gpio-controller@f000 {
-+		};
-+
-+		usb@22000 {
-+			phy_type = "utmi";
-+			dr_mode = "host";
-+		};
-+
-+		mdio@24000 {
-+			phy0: ethernet-phy@0 {
-+				reg = <0x0>;
-+				qca,ar8327-initvals = <
-+					0x00004 0x07600000 /* PAD0_MODE */
-+					0x00008 0x00000000 /* PAD5_MODE */
-+					0x0000c 0x01000000 /* PAD6_MODE */
-+					0x00010 0x40000000 /* POWER_ON_STRIP */
-+					0x00050 0xcf35cf35 /* LED_CTRL0 */
-+					0x00054 0xcf35cf35 /* LED_CTRL1 */
-+					0x00058 0xcf35cf35 /* LED_CTRL2 */
-+					0x0005c 0x03ffff00 /* LED_CTRL3 */
-+					0x0007c 0x0000007e /* PORT0_STATUS */
-+				>;
-+			};
-+		};
-+
-+		mdio@25000 {
-+			status = "disabled";
-+		};
-+
-+		mdio@26000 {
-+			status = "disabled";
-+		};
-+
-+		enet0: ethernet@b0000 {
-+			phy-handle = <&phy0>;
-+			phy-connection-type = "rgmii-id";
-+		};
-+
-+		enet1: ethernet@b1000 {
-+			status = "disabled";
-+		};
-+
-+		enet2: ethernet@b2000 {
-+			status = "disabled";
-+		};
-+
-+		sdhc@2e000 {
-+			status = "disabled";
-+		};
-+
-+		serial1: serial@4600 {
-+			status = "disabled";
-+		};
-+
-+		can0: can@1c000 {
-+			status = "disabled";
-+		};
-+
-+		can1: can@1d000 {
-+			status = "disabled";
-+		};
-+	};
-+
-+	pci0: pcie@ffe09000 {
-+		reg = <0 0xffe09000 0 0x1000>;
-+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-+		pcie@0 {
-+			ranges = <0x2000000 0x0 0xa0000000
-+				  0x2000000 0x0 0xa0000000
-+				  0x0 0x20000000
-+
-+				  0x1000000 0x0 0x0
-+				  0x1000000 0x0 0x0
-+				  0x0 0x100000>;
-+		};
-+	};
-+
-+	pci1: pcie@ffe0a000 {
-+		reg = <0 0xffe0a000 0 0x1000>;
-+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-+		pcie@0 {
-+			ranges = <0x2000000 0x0 0x80000000
-+				  0x2000000 0x0 0x80000000
-+				  0x0 0x20000000
-+
-+				  0x1000000 0x0 0x0
-+				  0x1000000 0x0 0x0
-+				  0x0 0x100000>;
-+		};
-+	};
-+
-+	ifc: ifc@ffe1e000 {
-+		status = "disabled";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		system {
-+			gpios = <&gpio0 2 1>; /* active low */
-+			label = "tp-link:blue:system";
-+		};
-+
-+		usb1 {
-+			gpios = <&gpio0 3 1>; /* active low */
-+			label = "tp-link:green:usb1";
-+		};
-+
-+		usb2 {
-+			gpios = <&gpio0 4 1>; /* active low */
-+			label = "tp-link:green:usb2";
-+		};
-+	};
-+
-+	buttons {
-+		compatible = "gpio-keys";
-+
-+		reset {
-+			label = "Reset button";
-+			gpios = <&gpio0 5 1>; /* active low */
-+			linux,code = <0x198>; /* KEY_RESTART */
-+		};
-+	};
-+};
-+
-+/include/ "fsl/p1010si-post.dtsi"
 --- a/arch/powerpc/boot/wrapper
 +++ b/arch/powerpc/boot/wrapper
 @@ -218,6 +218,10 @@ cuboot*)
@@ -465,151 +76,3 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  obj-$(CONFIG_SBC8548)     += sbc8548.o
  obj-$(CONFIG_PPA8548)     += ppa8548.o
  obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
---- /dev/null
-+++ b/arch/powerpc/platforms/85xx/tl_wdr4900_v1.c
-@@ -0,0 +1,145 @@
-+/*
-+ * TL-WDR4900 v1 board setup
-+ *
-+ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Based on:
-+ *   p1010rdb.c:
-+ *      P1010RDB Board Setup
-+ *      Copyright 2011 Freescale Semiconductor Inc.
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/stddef.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/of_platform.h>
-+#include <linux/ath9k_platform.h>
-+#include <linux/leds.h>
-+
-+#include <asm/time.h>
-+#include <asm/machdep.h>
-+#include <asm/pci-bridge.h>
-+#include <mm/mmu_decl.h>
-+#include <asm/prom.h>
-+#include <asm/udbg.h>
-+#include <asm/mpic.h>
-+
-+#include <sysdev/fsl_soc.h>
-+#include <sysdev/fsl_pci.h>
-+
-+#include "mpc85xx.h"
-+
-+void __init tl_wdr4900_v1_pic_init(void)
-+{
-+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
-+	  MPIC_SINGLE_DEST_CPU,
-+	  0, 256, " OpenPIC  ");
-+
-+	BUG_ON(mpic == NULL);
-+
-+	mpic_init(mpic);
-+}
-+
-+#ifdef CONFIG_PCI
-+static struct gpio_led tl_wdr4900_v1_wmac_leds_gpio[] = {
-+	{
-+		.name		= "tp-link:blue:wps",
-+		.gpio		= 1,
-+		.active_low	= 1,
-+	},
-+};
-+
-+static struct ath9k_platform_data tl_wdr4900_v1_wmac0_data = {
-+	.led_pin = 0,
-+	.eeprom_name = "pci_wmac0.eeprom",
-+	.leds = tl_wdr4900_v1_wmac_leds_gpio,
-+	.num_leds = ARRAY_SIZE(tl_wdr4900_v1_wmac_leds_gpio),
-+};
-+
-+static struct ath9k_platform_data tl_wdr4900_v1_wmac1_data = {
-+	.led_pin = 0,
-+	.eeprom_name = "pci_wmac1.eeprom",
-+};
-+
-+static void tl_wdr4900_v1_pci_wmac_fixup(struct pci_dev *dev)
-+{
-+	if (!machine_is(tl_wdr4900_v1))
-+		return;
-+
-+	if (dev->bus->number == 1 &&
-+	    PCI_SLOT(dev->devfn) == 0) {
-+		dev->dev.platform_data = &tl_wdr4900_v1_wmac0_data;
-+		return;
-+	}
-+
-+	if (dev->bus->number == 3 &&
-+	    PCI_SLOT(dev->devfn) == 0 &&
-+	    dev->device == 0xabcd) {
-+		dev->dev.platform_data = &tl_wdr4900_v1_wmac1_data;
-+
-+		/*
-+		 * The PCI header of the AR9381 chip is not programmed
-+		 * correctly by the bootloader and the device uses wrong
-+		 * data due to that. Replace the broken values with the
-+		 * correct ones.
-+		 */
-+		dev->device = 0x30;
-+		dev->class = 0x028000;
-+
-+		pr_info("pci %s: AR9381 fixup applied\n", pci_name(dev));
-+	}
-+}
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID,
-+			tl_wdr4900_v1_pci_wmac_fixup);
-+#endif /* CONFIG_PCI */
-+
-+/*
-+ * Setup the architecture
-+ */
-+static void __init tl_wdr4900_v1_setup_arch(void)
-+{
-+	if (ppc_md.progress)
-+		ppc_md.progress("tl_wdr4900_v1_setup_arch()", 0);
-+
-+	fsl_pci_assign_primary();
-+
-+	printk(KERN_INFO "TL-WDR4900 v1 board from TP-Link\n");
-+}
-+
-+machine_arch_initcall(tl_wdr4900_v1, mpc85xx_common_publish_devices);
-+machine_arch_initcall(tl_wdr4900_v1, swiotlb_setup_bus_notifier);
-+
-+/*
-+ * Called very early, device-tree isn't unflattened
-+ */
-+static int __init tl_wdr4900_v1_probe(void)
-+{
-+	unsigned long root = of_get_flat_dt_root();
-+
-+	if (of_flat_dt_is_compatible(root, "tp-link,TL-WDR4900v1"))
-+		return 1;
-+
-+	return 0;
-+}
-+
-+define_machine(tl_wdr4900_v1) {
-+	.name			= "Freescale P1014",
-+	.probe			= tl_wdr4900_v1_probe,
-+	.setup_arch		= tl_wdr4900_v1_setup_arch,
-+	.init_IRQ		= tl_wdr4900_v1_pic_init,
-+#ifdef CONFIG_PCI
-+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-+#endif
-+	.get_irq		= mpic_get_irq,
-+	.restart		= fsl_rstcr_restart,
-+	.calibrate_decr		= generic_calibrate_decr,
-+	.progress		= udbg_progress,
-+};