mvebu: add support for the Linksys WRT3200ACM (Rango)

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

8 files changed, 34 insertions, 14 deletions

diff --git a/target/linux/mvebu/base-files/etc/board.d/01_leds b/target/linux/mvebu/base-files/etc/board.d/01_leds
index 71dd347..8310160 100755
--- a/target/linux/mvebu/base-files/etc/board.d/01_leds
+++ b/target/linux/mvebu/base-files/etc/board.d/01_leds
@@ -1,6 +1,7 @@
 #!/bin/sh
 #
-# Copyright (C) 2014-2015 OpenWrt.org
+# Copyright (C) 2014-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
 #
 
 . /lib/functions/uci-defaults.sh
@@ -21,6 +22,11 @@ armada-385-linksys-cobra)
 	ucidef_set_led_usbdev "usb2" "USB2" "pca963x:cobra:white:usb2" "1-1"
 	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:cobra:white:usb3_1" "2-1"
 	;;
+armada-385-linksys-rango)
+	ucidef_set_led_netdev "wan" "WAN" "pca963x:rango:white:wan" "eth0"
+	ucidef_set_led_usbdev "usb2" "USB2" "pca963x:rango:white:usb2" "1-1"
+	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:rango:white:usb3_1" "2-1"
+	;;
 armada-385-linksys-shelby)
 	ucidef_set_led_netdev "wan" "WAN" "pca963x:shelby:white:wan" "eth0"
 	ucidef_set_led_usbdev "usb2" "USB2" "pca963x:shelby:white:usb2" "1-1"
diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network
index 21c6660..614a0e2 100755
--- a/target/linux/mvebu/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/base-files/etc/board.d/02_network
@@ -1,6 +1,7 @@
 #!/bin/sh
 #
-# Copyright (C) 2014-2015 OpenWrt.org
+# Copyright (C) 2014-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
 #
 
 . /lib/functions/uci-defaults.sh
@@ -13,6 +14,7 @@ board=$(mvebu_board_name)
 case "$board" in
 armada-385-linksys-caiman|\
 armada-385-linksys-cobra|\
+armada-385-linksys-rango|\
 armada-385-linksys-shelby)
 	ucidef_set_interfaces_lan_wan "eth1" "eth0"
 	ucidef_add_switch "switch0" \
diff --git a/target/linux/mvebu/base-files/etc/diag.sh b/target/linux/mvebu/base-files/etc/diag.sh
index a361fa7..622c7d9 100644
--- a/target/linux/mvebu/base-files/etc/diag.sh
+++ b/target/linux/mvebu/base-files/etc/diag.sh
@@ -13,6 +13,9 @@ get_status_led() {
 	armada-385-linksys-cobra)
 		status_led="cobra:white:power"
 		;;
+	armada-385-linksys-rango)
+		status_led="rango:white:power"
+		;;
 	armada-385-linksys-shelby)
 		status_led="shelby:white:power"
 		;;
diff --git a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
index d9cae7b..8eeb5f9 100755
--- a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
+++ b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
@@ -1,5 +1,6 @@
 #!/bin/sh /etc/rc.common
-# Copyright (C) 2015 OpenWrt.org
+# Copyright (C) 2015-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
 
 START=97
 boot() {
@@ -7,7 +8,7 @@ boot() {
 . /lib/mvebu.sh
 
 case $(mvebu_board_name) in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
 		# make sure auto_recovery in uboot is always on
 		AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
 		if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
diff --git a/target/linux/mvebu/base-files/lib/mvebu.sh b/target/linux/mvebu/base-files/lib/mvebu.sh
index 836717d..9a4c53e 100755
--- a/target/linux/mvebu/base-files/lib/mvebu.sh
+++ b/target/linux/mvebu/base-files/lib/mvebu.sh
@@ -1,6 +1,7 @@
 #!/bin/sh
 #
 # Copyright (C) 2013-2015 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
 #
 
 MVEBU_BOARD_NAME=
@@ -43,6 +44,9 @@ mvebu_board_detect() {
 	*"Linksys WRT1900ACS")
 		name="armada-385-linksys-shelby"
 		;;
+	*"Linksys WRT3200ACM")
+		name="armada-385-linksys-rango"
+		;;
 	*"Marvell Armada 385 Access Point Development Board")
 		name="armada-385-db-ap"
 		;;
diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
index 876c08b..3e870e8 100644
--- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
@@ -1,5 +1,6 @@
 #
 # Copyright (C) 2014-2015 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
 #
 
 preinit_set_mac_address() {
@@ -14,7 +15,7 @@ preinit_set_mac_address() {
 		ifconfig eth0 hw ether $mac 2>/dev/null
 		ifconfig eth1 hw ether $mac 2>/dev/null
 		;;
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby)
 		mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		mac_wan=$(macaddr_setbit_la "$mac")
 		ifconfig eth1 hw ether $mac 2>/dev/null
diff --git a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
index a54226f..3edd82e 100644
--- a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
+++ b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
@@ -1,5 +1,6 @@
 #
-# Copyright (C) 2014 OpenWrt.org
+# Copyright (C) 2014-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
 #
 
 preinit_mount_syscfg() {
@@ -8,15 +9,16 @@ preinit_mount_syscfg() {
 	. /lib/mvebu.sh
 
 	case $(mvebu_board_name) in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
 		needs_recovery=0
-		ubiattach -m 8 || needs_recovery=1
+		syscfg_part=$(grep syscfg /proc/mtd |cut -c4)
+		ubiattach -m $syscfg_part || needs_recovery=1
 		if [ $needs_recovery -eq 1 ]
 		then
 			echo "ubifs syscfg partition is damaged, reformatting"
-			ubidetach -m 8
-			ubiformat -y -O 2048 -q /dev/mtd8
-			ubiattach -m 8
+			ubidetach -m $syscfg_part
+			ubiformat -y -O 2048 -q /dev/mtd$syscfg_part
+			ubiattach -m $syscfg_part
 			ubimkvol /dev/ubi1 -n 0 -N syscfg -t dynamic --maxavsize
 		fi
 		mkdir /tmp/syscfg
diff --git a/target/linux/mvebu/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
index 5652e98..a8ad602 100755
--- a/target/linux/mvebu/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
@@ -1,5 +1,6 @@
 #
-# Copyright (C) 2014 OpenWrt.org
+# Copyright (C) 2014-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
 #
 
 . /lib/mvebu.sh
@@ -13,7 +14,7 @@ platform_check_image() {
 	[ "$#" -gt 1 ] && return 1
 
 	case "$board" in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
 		[ "$magic_long" != "27051956" -a "$magic_long" != "73797375" ] && {
 			echo "Invalid image type."
 			return 1
@@ -34,7 +35,7 @@ platform_do_upgrade() {
 	local board=$(mvebu_board_name)
 
 	case "$board" in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
 		platform_do_upgrade_linksys "$ARGV"
 		;;
 	armada-388-clearfog)