mvebu: Enable the A385 AP on 3.19

In order for the image to be built, some patches need to be ported to 3.19.

Add the relevant patches. Note that most of them (if not all) should be merged
in 3.20, removing the need to carry them on then.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44267

1 files changed, 70 insertions, 0 deletions

diff --git a/target/linux/mvebu/patches-3.19/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch b/target/linux/mvebu/patches-3.19/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch
new file mode 100644
index 0000000..7e27ae2
--- /dev/null
+++ b/target/linux/mvebu/patches-3.19/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch
@@ -0,0 +1,70 @@
+From 91b4c91f919abffa72cbf7545a944252f8e4f775 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Thu, 8 Jan 2015 18:38:08 +0100
+Subject: [PATCH 3/4] ARM: mvebu: Add a number of pinctrl functions
+
+Some pinctrl functions can be shared with all DTS out there, since they are
+generic, SoC-wide muxing options. Add a number of these to the DTSI to avoid
+duplication.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Signed-off-by: Andrew Lunn <andrew@lunn.ch>
+---
+ arch/arm/boot/dts/armada-38x.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 39 insertions(+)
+
+diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
+index 40200084c6c8..98885c58be29 100644
+--- a/arch/arm/boot/dts/armada-38x.dtsi
++++ b/arch/arm/boot/dts/armada-38x.dtsi
+@@ -195,6 +195,45 @@
+ 
+ 			pinctrl@18000 {
+ 				reg = <0x18000 0x20>;
++
++				ge0_rgmii_pins: ge-rgmii-pins-0 {
++					marvell,pins = "mpp6", "mpp7", "mpp8",
++						       "mpp9", "mpp10", "mpp11",
++						       "mpp12", "mpp13", "mpp14",
++						       "mpp15", "mpp16", "mpp17";
++					marvell,function = "ge0";
++				};
++
++				i2c0_pins: i2c-pins-0 {
++					marvell,pins = "mpp2", "mpp3";
++					marvell,function = "i2c0";
++				};
++
++				mdio_pins: mdio-pins {
++					marvell,pins = "mpp4", "mpp5";
++					marvell,function = "ge";
++				};
++
++				ref_clk0_pins: ref-clk-pins-0 {
++					marvell,pins = "mpp45";
++					marvell,function = "ref";
++				};
++
++				spi1_pins: spi-pins-1 {
++					marvell,pins = "mpp56", "mpp57", "mpp58",
++						       "mpp59";
++					marvell,function = "spi1";
++				};
++
++				uart0_pins: uart-pins-0 {
++					marvell,pins = "mpp0", "mpp1";
++					marvell,function = "ua0";
++				};
++
++				uart1_pins: uart-pins-1 {
++					marvell,pins = "mpp19", "mpp20";
++					marvell,function = "ua1";
++				};
+ 			};
+ 
+ 			gpio0: gpio@18100 {
+-- 
+2.2.1
+