summaryrefslogtreecommitdiff
path: root/target/linux/mvebu/patches-4.4
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@nbd.name>2016-05-21 18:07:28 +0200
committerFelix Fietkau <nbd@nbd.name>2016-05-21 18:08:29 +0200
commita5a3b59bf54c72c1eea7745d7a83dfc298d4ae1e (patch)
treeb5bd4ff7e97686baa4f8237e9cd88b5ee2f53932 /target/linux/mvebu/patches-4.4
parent008579f2fff07e97f503d321dd66098d823b4237 (diff)
downloadmtk-20170518-a5a3b59bf54c72c1eea7745d7a83dfc298d4ae1e.zip
mtk-20170518-a5a3b59bf54c72c1eea7745d7a83dfc298d4ae1e.tar.gz
mtk-20170518-a5a3b59bf54c72c1eea7745d7a83dfc298d4ae1e.tar.bz2
mvebu: add some more flash driver fixes
Disable marvell,nand-keep-config property on WRT1900AC to allow the flash driver to properly probe the chip Signed-off-by: Felix Fietkau <nbd@nbd.name>
Diffstat (limited to 'target/linux/mvebu/patches-4.4')
-rw-r--r--target/linux/mvebu/patches-4.4/021-mtd-pxa3xx_nand-Increase-the-initial-chunk-size.patch42
-rw-r--r--target/linux/mvebu/patches-4.4/022-mtd-pxa3xx_nand-Fix-initial-controller-configuration.patch104
-rw-r--r--target/linux/mvebu/patches-4.4/104-linksys_mamba_disable_keep_config.patch10
3 files changed, 156 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-4.4/021-mtd-pxa3xx_nand-Increase-the-initial-chunk-size.patch b/target/linux/mvebu/patches-4.4/021-mtd-pxa3xx_nand-Increase-the-initial-chunk-size.patch
new file mode 100644
index 0000000..f928f46
--- /dev/null
+++ b/target/linux/mvebu/patches-4.4/021-mtd-pxa3xx_nand-Increase-the-initial-chunk-size.patch
@@ -0,0 +1,42 @@
+From: =?UTF-8?q?Ezequiel=20Garc=C3=ADa?= <ezequiel@vanguardiasur.com.ar>
+Date: Wed, 4 Nov 2015 13:13:41 -0300
+Subject: [PATCH] mtd: pxa3xx_nand: Increase the initial chunk size
+
+The chunk size represents the size of the data chunks, which
+is used by the controllers that allow to split transfered data.
+
+However, the initial chunk size is used in a non-splitted way,
+during device identification. Therefore, it must be large enough
+for all the NAND commands issued during device identification.
+This includes NAND_CMD_PARAM which was recently changed to
+transfer up to 2048 bytes (for the redundant parameter pages).
+
+Thus, the initial chunk size should be 2048 as well.
+
+On Armada 370/XP platforms (NFCv2) booted without the keep-config
+devicetree property, this commit fixes a timeout on the NAND_CMD_PARAM
+command:
+
+ [..]
+ pxa3xx-nand f10d0000.nand: This platform can't do DMA on this device
+ pxa3xx-nand f10d0000.nand: Wait time out!!!
+ nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x38
+ nand: Micron MT29F8G08ABABAWP
+ nand: 1024 MiB, SLC, erase size: 512 KiB, page size: 4096, OOB size: 224
+
+Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
+Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+---
+
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -1636,7 +1636,7 @@ static int pxa3xx_nand_scan(struct mtd_i
+ goto KEEP_CONFIG;
+
+ /* Set a default chunk size */
+- info->chunk_size = 512;
++ info->chunk_size = PAGE_CHUNK_SIZE;
+
+ ret = pxa3xx_nand_config_flash(info);
+ if (ret)
diff --git a/target/linux/mvebu/patches-4.4/022-mtd-pxa3xx_nand-Fix-initial-controller-configuration.patch b/target/linux/mvebu/patches-4.4/022-mtd-pxa3xx_nand-Fix-initial-controller-configuration.patch
new file mode 100644
index 0000000..260e7dc
--- /dev/null
+++ b/target/linux/mvebu/patches-4.4/022-mtd-pxa3xx_nand-Fix-initial-controller-configuration.patch
@@ -0,0 +1,104 @@
+From: =?UTF-8?q?Ezequiel=20Garc=C3=ADa?= <ezequiel@vanguardiasur.com.ar>
+Date: Wed, 4 Nov 2015 13:13:42 -0300
+Subject: [PATCH] mtd: pxa3xx_nand: Fix initial controller configuration
+
+The Data Flash Control Register (NDCR) contains two types
+of parameters: those that are needed for device identification,
+and those that can only be set after device identification.
+
+Therefore, the driver can't set them all at once and instead
+needs to configure the first group before nand_scan_ident()
+and the second group later.
+
+Let's split pxa3xx_nand_config in two halves, and set the
+parameters that depend on the device geometry once this is known.
+
+Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+---
+
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -1419,34 +1419,43 @@ static int pxa3xx_nand_waitfunc(struct m
+ return NAND_STATUS_READY;
+ }
+
+-static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info)
++static int pxa3xx_nand_config_ident(struct pxa3xx_nand_info *info)
+ {
+ struct platform_device *pdev = info->pdev;
+ struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+- struct pxa3xx_nand_host *host = info->host[info->cs];
+- struct mtd_info *mtd = host->mtd;
+- struct nand_chip *chip = mtd->priv;
+
+- /* configure default flash values */
++ /* Configure default flash values */
++ info->chunk_size = PAGE_CHUNK_SIZE;
+ info->reg_ndcr = 0x0; /* enable all interrupts */
+ info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
+ info->reg_ndcr |= NDCR_RD_ID_CNT(READ_ID_BYTES);
+- info->reg_ndcr |= NDCR_SPARE_EN; /* enable spare by default */
++ info->reg_ndcr |= NDCR_SPARE_EN;
++
++ return 0;
++}
++
++static void pxa3xx_nand_config_tail(struct pxa3xx_nand_info *info)
++{
++ struct pxa3xx_nand_host *host = info->host[info->cs];
++ struct mtd_info *mtd = host->mtd;
++ struct nand_chip *chip = mtd->priv;
++
+ info->reg_ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+ info->reg_ndcr |= (chip->page_shift == 6) ? NDCR_PG_PER_BLK : 0;
+ info->reg_ndcr |= (mtd->writesize == 2048) ? NDCR_PAGE_SZ : 0;
+-
+- return 0;
+ }
+
+ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
+ {
++ struct platform_device *pdev = info->pdev;
++ struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ uint32_t ndcr = nand_readl(info, NDCR);
+
+ /* Set an initial chunk size */
+ info->chunk_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
+ info->reg_ndcr = ndcr &
+ ~(NDCR_INT_MASK | NDCR_ND_ARB_EN | NFCV1_NDCR_ARB_CNTL);
++ info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
+ info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+ info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+ return 0;
+@@ -1635,10 +1644,7 @@ static int pxa3xx_nand_scan(struct mtd_i
+ if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
+ goto KEEP_CONFIG;
+
+- /* Set a default chunk size */
+- info->chunk_size = PAGE_CHUNK_SIZE;
+-
+- ret = pxa3xx_nand_config_flash(info);
++ ret = pxa3xx_nand_config_ident(info);
+ if (ret)
+ return ret;
+
+@@ -1651,7 +1657,6 @@ static int pxa3xx_nand_scan(struct mtd_i
+ }
+
+ KEEP_CONFIG:
+- info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
+ if (info->reg_ndcr & NDCR_DWIDTH_M)
+ chip->options |= NAND_BUSWIDTH_16;
+
+@@ -1736,6 +1741,10 @@ KEEP_CONFIG:
+ host->row_addr_cycles = 3;
+ else
+ host->row_addr_cycles = 2;
++
++ if (!pdata->keep_config)
++ pxa3xx_nand_config_tail(info);
++
+ return nand_scan_tail(mtd);
+ }
+
diff --git a/target/linux/mvebu/patches-4.4/104-linksys_mamba_disable_keep_config.patch b/target/linux/mvebu/patches-4.4/104-linksys_mamba_disable_keep_config.patch
new file mode 100644
index 0000000..4c6b311
--- /dev/null
+++ b/target/linux/mvebu/patches-4.4/104-linksys_mamba_disable_keep_config.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -298,7 +298,6 @@
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+- marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;