mvebu: add the new tlc59116 driver and migrate the Mamba to it

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43975

4 files changed, 401 insertions, 531 deletions

diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts
index b544389..8593fde 100644
--- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts
+++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts
@@ -153,10 +153,61 @@
 				};
 
 				tlc59116@68 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					#gpio-cells = <2>;
-					compatible = "gpio,tlc59116";
+					compatible = "ti,tlc59116";
 					reg = <0x68>;
-					gpio-controller;
+
+					wan_amber@0 {
+						label = "mamba:amber:wan";
+							reg = <0x0>;
+					};
+
+					wan_white@1 {
+						label = "mamba:white:wan";
+							reg = <0x1>;
+					};
+
+					wlan_2g@2 {
+						label = "mamba:white:wlan_2g";
+							reg = <0x2>;
+					};
+
+					wlan_5g@3 {
+						label = "mamba:white:wlan_5g";
+							reg = <0x3>;
+					};
+
+					esata@4 {
+						label = "mamba:white:esata";
+							reg = <0x4>;
+					};
+
+					usb2@5 {
+						label = "mamba:white:usb2";
+							reg = <0x5>;
+					};
+
+					usb3_1@6 {
+						label = "mamba:white:usb3_1";
+							reg = <0x6>;
+					};
+
+					usb3_2@7 {
+						label = "mamba:white:usb3_2";
+							reg = <0x7>;
+					};
+
+					wps_white@8 {
+						label = "mamba:white:wps";
+							reg = <0x8>;
+					};
+
+					wps_amber@9 {
+						label = "mamba:amber:wps";
+							reg = <0x9>;
+					};
 				};
 			};
 
diff --git a/target/linux/mvebu/patches-3.18/003-add_leds_tlc59116_driver.patch b/target/linux/mvebu/patches-3.18/003-add_leds_tlc59116_driver.patch
deleted file mode 100644
index cb9f157..0000000
--- a/target/linux/mvebu/patches-3.18/003-add_leds_tlc59116_driver.patch
+++ /dev/null
@@ -1,529 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -505,6 +505,15 @@ config LEDS_VERSATILE
- 	  This option enabled support for the LEDs on the ARM Versatile
- 	  and RealView boards. Say Y to enabled these.
- 
-+config LEDS_TLC59116
-+	tristate "LED driver for TLC59116F dimmer"
-+	depends on LEDS_CLASS
-+	depends on I2C
-+	help
-+	  This option enables support for Texas Instruments TLC59116F
-+	  LED controller. It is generally only useful
-+	  as a platform driver
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
- 
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_LEDS_BLINKM)		+= leds-blink
- obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
- obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
- obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
-+obj-$(CONFIG_LEDS_TLC59116)		+= leds-tlc59116.o
- 
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
---- /dev/null
-+++ b/drivers/leds/leds-tlc59116.c
-@@ -0,0 +1,498 @@
-+/*
-+ * Copyright 2014 Belkin Inc.
-+ *
-+ * Author: Belkin Inc.
-+ *
-+ * This file is subject to the terms and conditions of version 2 of
-+ * the GNU General Public License.  See the file COPYING in the main
-+ * directory of this archive for more details.
-+ *
-+ * LED driver for various TLC59116 I2C LED drivers
-+  */
-+
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/string.h>
-+#include <linux/ctype.h>
-+#include <linux/leds.h>
-+#include <linux/err.h>
-+#include <linux/i2c.h>
-+#include <linux/workqueue.h>
-+
-+/* LED select registers determine the source that drives LED outputs */
-+#define TLC59116_LED_OFF	0x0	/* Output LOW */
-+#define TLC59116_LED_ON	0x1	/* Output HI-Z */
-+#define TLC59116_DIM	0x2	/* Dimming */
-+#define TLC59116_BLINK	0x3	/* Blinking */
-+
-+#define TLC59116_PINS		16
-+#define TLC59116_REG_MODE1	0x00	/* Mode register 0 */
-+#define MODE1_RESPON_ADDR_MASK	0xF0
-+#define MODE1_NORMAL_MODE	(0 << 4)
-+#define MODE1_SPEED_MODE	(1 << 4)
-+
-+#define TLC59116_REG_MODE2	0x01	/* Mode register 1 */
-+#define MODE2_DIM		(0 << 5)
-+#define MODE2_BLINK		(1 << 5)
-+#define MODE2_OCH_STOP                  (0 << 3)
-+#define MODE2_OCH_ACK                   (1 << 3)
-+
-+#define TLC59116_REG_PWM0	0x02
-+#define TLC59116_REG_PWM1	0x03
-+#define TLC59116_REG_PWM2	0x04
-+#define TLC59116_REG_PWM3	0x05
-+#define TLC59116_REG_PWM4	0x06
-+#define TLC59116_REG_PWM5	0x07
-+#define TLC59116_REG_PWM6	0x08
-+#define TLC59116_REG_PWM7	0x09
-+#define TLC59116_REG_PWM8	0x0a
-+#define TLC59116_REG_PWM9	0x0b
-+#define TLC59116_REG_PWM10	0x0c
-+#define TLC59116_REG_PWM11	0x0d
-+#define TLC59116_REG_PWM12	0x0e
-+#define TLC59116_REG_PWM13	0x0f
-+#define TLC59116_REG_PWM14	0x10
-+#define TLC59116_REG_PWM15	0x01
-+
-+#define TLC59116_REG_GRPPWM	0x12
-+#define TLC59116_REG_GRPFREQ	0x13
-+
-+#define TLC59116_PERIOD_MIN	41	/* 41ms */
-+#define TLC59116_PERIOD_MAX	10730	/* 10.73s */
-+
-+#define TLC59116_REG_LEDOUT0         0x14    /* LED [3:0] driver output state registers */              
-+#define TLC59116_REG_LEDOUT1         0x15    /* LED [7:4] driver output state registers */
-+#define TLC59116_REG_LEDOUT2         0x16    /* LED [11:8] driver output state registers */
-+#define TLC59116_REG_LEDOUT3         0x17    /* LED [15:12] driver output state registers */
-+
-+#define GPIO0_MASK        0x3
-+
-+#define DEBUG 0
-+
-+#if DEBUG > 1
-+#define led_dbg(fmt, arg...) printk(KERN_DEBUG "tlc59116:%s " fmt "\n", __func__ , ## arg)
-+#else
-+#define led_dbg(fmt, arg...)
-+#endif
-+
-+
-+#if DEBUG > 0
-+#define led_info(fmt, arg...) printk("tlc59116:%s " fmt "\n", __func__ , ## arg)
-+#else
-+#define led_info(fmt, arg...)
-+#endif
-+
-+enum tlc59116_type {
-+	tlc59116,
-+};
-+
-+struct tlc59116_chipdef {
-+	int			bits;
-+	u8			slv_addr;	/* 7-bit slave address mask */
-+	int			slv_addr_shift;	/* Number of bits to ignore */
-+};
-+
-+static struct tlc59116_chipdef tlc59116_chipdefs[] = {
-+	[tlc59116] = {
-+		.bits		= 16,
-+		.slv_addr	= /* 1100xxx */ 0x68,
-+		.slv_addr_shift	= 3,
-+	},
-+};
-+
-+static const struct i2c_device_id tlc59116_id[] = {
-+	{ "tlc59116", tlc59116 },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(i2c, tlc59116_id);
-+
-+struct tlc59116_led {
-+	struct tlc59116_chipdef	*chipdef;
-+	struct i2c_client	*client;
-+	struct work_struct	work;
-+	spinlock_t		lock;
-+	enum led_brightness	brightness;
-+	struct led_classdev	led_cdev;
-+	int			led_num;	/* 0 .. 8 potentially */
-+	char			name[32];
-+};
-+
-+//#define DUMP_REGS
-+
-+#ifdef DUMP_REGS
-+void dump_regs(struct i2c_client *client)
-+{
-+        int i, j = 0;
-+        u8 data;
-+        printk ("\n-------------------------------------\n");
-+        for (i = 0; i< 0x20; i++)
-+        {
-+                data = i2c_smbus_read_byte_data(client, i);
-+		printk ("[0x%x] = 0x%x ",i, data);
-+                j++;
-+                if (j == 5)
-+                {
-+                        printk ("\n");
-+                        j = 0;
-+                }
-+        }
-+        printk ("\n");
-+}
-+#endif
-+
-+static int tlc59116_set_mode(struct i2c_client *client, uint8_t mode)
-+{
-+	uint8_t val = 0;
-+	
-+	if ((mode != MODE2_DIM) && (mode != MODE2_BLINK))
-+		mode = MODE2_DIM;
-+
-+	/* Configure MODE1 register */
-+	val &= 0x0;
-+	val &= MODE1_RESPON_ADDR_MASK;
-+	val |= MODE1_NORMAL_MODE;
-+        i2c_smbus_write_byte_data(client, TLC59116_REG_MODE1, val);
-+
-+        /* Configure MODE2 Reg */
-+        val &= 0x00;
-+        val |= MODE2_OCH_STOP;
-+
-+        val |= mode;
-+
-+        i2c_smbus_write_byte_data(client, TLC59116_REG_MODE2, val);
-+        mdelay(100);
-+	
-+	return 0;
-+}
-+
-+static int tlc59116_set_gpio_act(struct i2c_client *client, u8 gpio_no, u8 act_mode)
-+{
-+        char data, addr = 0, i;
-+
-+        if ((gpio_no >= 0) && (gpio_no < 4))
-+                addr = TLC59116_REG_LEDOUT0;
-+        else if ((gpio_no >= 4) && (gpio_no < 8))
-+                addr = TLC59116_REG_LEDOUT1;
-+        else if ((gpio_no >= 8) && (gpio_no < 12))
-+                addr = TLC59116_REG_LEDOUT2;
-+        else if ((gpio_no >=12 ) && (gpio_no < 16))
-+                addr = TLC59116_REG_LEDOUT3;
-+
-+        data = i2c_smbus_read_byte_data(client, addr);
-+
-+        i = (gpio_no % 4) * 2;
-+
-+        data &= ~(GPIO0_MASK << i);
-+        act_mode = act_mode << i;
-+        data |= act_mode;
-+
-+        if(i2c_smbus_write_byte_data(client, addr, data) != 0) {
-+                return -1;
-+        }
-+        return 0;
-+}
-+
-+static int tlc59116_set_gpio(struct i2c_client *client, uint8_t gpio_no, uint8_t val)
-+{
-+	val &= 0x03;
-+        tlc59116_set_gpio_act(client, gpio_no, val);
-+#ifdef DUMP_REGS
-+	dump_regs(client);
-+#endif
-+        return 0;
-+}
-+
-+static int tlc59116_get_gpio(struct i2c_client *client, uint8_t gpio_no)
-+{
-+	uint8_t val, reg, data;
-+	
-+	led_dbg("gpio = %d\n", gpio_no);
-+	reg = TLC59116_REG_LEDOUT0;
-+
-+        if ((gpio_no >= 0) && (gpio_no < 4))
-+                reg = TLC59116_REG_LEDOUT0;
-+        else if ((gpio_no >= 4) && (gpio_no < 8)) {
-+                reg = TLC59116_REG_LEDOUT1;
-+		gpio_no = gpio_no - 4;
-+	}
-+        else if ((gpio_no >= 8) && (gpio_no < 12)) {
-+                reg = TLC59116_REG_LEDOUT2;
-+		gpio_no = gpio_no - 8;
-+	}
-+        else if ((gpio_no >=12 ) && (gpio_no < 16)) {
-+                reg = TLC59116_REG_LEDOUT3;
-+		gpio_no = gpio_no - 12;
-+	}
-+	
-+	val = i2c_smbus_read_byte_data(client, reg);
-+
-+	data = (val >> (gpio_no * 2)) & 0x03;
-+	return data;
-+}
-+
-+/*
-+ * gpio_no [0..7]
-+ * duty_cycle [0..99]%
-+ * 
-+ * */
-+static int tlc59116_individual_brighness_control(struct i2c_client *client, uint8_t gpio_no, uint8_t brightness)
-+{
-+	uint8_t pwm;
-+
-+	pwm = gpio_no + TLC59116_REG_PWM0;
-+        i2c_smbus_write_byte_data(client, pwm, brightness);
-+
-+        return 0;
-+}
-+
-+static void tlc59116_led_work(struct work_struct *work)
-+{
-+	struct tlc59116_led *tlc59116;
-+
-+	tlc59116 = container_of(work, struct tlc59116_led, work);
-+
-+	led_dbg("\nbrighness = %d \n", tlc59116->brightness);
-+	switch (tlc59116->brightness) {
-+	case LED_OFF:
-+		led_info("\nLed off\n");
-+		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_OFF);
-+		break;
-+
-+	case LED_FULL:
-+		led_info("\nLed on\n");
-+		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_ON);
-+		break;
-+	default:
-+		led_info("\nBrightness is %d\n", tlc59116->brightness);
-+		if (TLC59116_BLINK != tlc59116_get_gpio(tlc59116->client, tlc59116->led_num))
-+			tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_DIM);
-+
-+		tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
-+		break;
-+	}
-+
-+}
-+
-+static void tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	struct tlc59116_led *tlc59116;
-+
-+	tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev);
-+
-+	spin_lock(&tlc59116->lock);
-+	tlc59116->brightness = value;
-+
-+	/*
-+	 * Must use workqueue for the actual I/O since I2C operations
-+	 * can sleep.
-+	 */
-+	schedule_work(&tlc59116->work);
-+
-+	spin_unlock(&tlc59116->lock);
-+}
-+
-+/*
-+ * delay_on, delay_off: units are in ms
-+ *
-+ */
-+
-+static int tlc59116_set_blink(struct led_classdev *led_cdev,
-+				unsigned long *delay_on,
-+				unsigned long *delay_off)
-+{
-+	struct tlc59116_led *tlc59116;
-+	uint16_t	period;
-+	uint16_t	duty_cycle;
-+	uint8_t		gdc;
-+	uint8_t		gfrq;
-+	
-+	tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev);
-+	led_info ("Blinking: delay_on = %ldms, delay_off = %ldms, brightness = %d\n", 
-+				*delay_on, *delay_off, tlc59116->brightness);
-+
-+	// Hardware blinking only for tricolor leds . The rest will have software blinking
-+	if (tlc59116->led_num > 2) 
-+		return 1;
-+
-+	if ((*delay_on == 0) && (*delay_off ==0)) {
-+		spin_lock(&tlc59116->lock);
-+
-+		/* MODE2[DMBLNK] = 1 */
-+		tlc59116_set_mode(tlc59116->client, MODE2_BLINK);
-+
-+		/* Set LDRx = 11 */
-+		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK);
-+
-+		tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
-+		spin_unlock(&tlc59116->lock);
-+		return 0;
-+	}
-+
-+
-+	if ((*delay_on + *delay_off) > TLC59116_PERIOD_MAX)
-+	{
-+		led_dbg ("Max period is %dms\n", TLC59116_PERIOD_MAX);
-+		return -EINVAL;
-+	}
-+
-+	if ((*delay_on + *delay_off) < TLC59116_PERIOD_MIN)
-+	{
-+		*delay_on = TLC59116_PERIOD_MIN/2 + 1;
-+		*delay_off = TLC59116_PERIOD_MIN/2 + 1;
-+	}
-+	period = (*delay_on) + (*delay_off);
-+
-+	duty_cycle = (100 * (*delay_on)) / period;
-+
-+	spin_lock(&tlc59116->lock);
-+	
-+	/* MODE2[DMBLNK] = 1 */
-+	tlc59116_set_mode(tlc59116->client, MODE2_BLINK);
-+
-+	/* Set LDRx = 11 */
-+	tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK);
-+
-+	tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
-+
-+	gdc = (duty_cycle * 256)/100;
-+	i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPPWM, gdc);	
-+
-+	gfrq = (24 * period)/1000 - 1; /* unit is in second (convert from ms to second) */
-+	i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPFREQ, gfrq);		
-+	
-+
-+#ifdef DUMP_REGS
-+	dump_regs(tlc59116->client);
-+#endif
-+
-+	spin_unlock(&tlc59116->lock);
-+	return 0;
-+}
-+
-+static int tlc59116_probe(struct i2c_client *client,
-+					const struct i2c_device_id *id)
-+{
-+	struct tlc59116_led *tlc59116;
-+	struct tlc59116_chipdef *chip;
-+	struct i2c_adapter *adapter;
-+	struct led_platform_data *pdata;
-+	int i, err;
-+
-+	chip = &tlc59116_chipdefs[id->driver_data];
-+	adapter = to_i2c_adapter(client->dev.parent);
-+	pdata = client->dev.platform_data;
-+
-+	/* Make sure the slave address / chip type combo given is possible */
-+	if ((client->addr & ~((1 << chip->slv_addr_shift) - 1)) !=
-+	    chip->slv_addr) {
-+		dev_err(&client->dev, "invalid slave address %02x\n",
-+				client->addr);
-+		return -ENODEV;
-+	}
-+
-+	printk(KERN_INFO "leds-tlc59116: Using %s %d-bit LED driver at "
-+			"slave address 0x%02x\n",
-+			id->name, chip->bits, client->addr);
-+
-+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
-+		return -EIO;
-+
-+	if (pdata) {
-+		if (pdata->num_leds != chip->bits) {
-+			dev_err(&client->dev, "board info claims %d LEDs"
-+					" on a %d-bit chip\n",
-+					pdata->num_leds, chip->bits);
-+			return -ENODEV;
-+		}
-+	}
-+
-+	tlc59116 = devm_kzalloc(&client->dev, sizeof(*tlc59116) * chip->bits, GFP_KERNEL);
-+	if (!tlc59116)
-+		return -ENOMEM;
-+
-+	i2c_set_clientdata(client, tlc59116);
-+
-+	for (i = 0; i < chip->bits; i++) {
-+		tlc59116[i].chipdef = chip;
-+		tlc59116[i].client = client;
-+		tlc59116[i].led_num = i;
-+
-+		/* Platform data can specify LED names and default triggers */
-+		if (pdata) {
-+			if (pdata->leds[i].name)
-+				snprintf(tlc59116[i].name,
-+					 sizeof(tlc59116[i].name), "tlc59116:%s",
-+					 pdata->leds[i].name);
-+			if (pdata->leds[i].default_trigger)
-+				tlc59116[i].led_cdev.default_trigger =
-+					pdata->leds[i].default_trigger;
-+		} else {
-+			snprintf(tlc59116[i].name, sizeof(tlc59116[i].name),
-+				 "tlc59116:%d", i);
-+		}
-+
-+		spin_lock_init(&tlc59116[i].lock);
-+
-+		tlc59116[i].led_cdev.name = tlc59116[i].name;
-+		tlc59116[i].led_cdev.brightness_set = tlc59116_led_set;
-+	        tlc59116[i].led_cdev.blink_set = tlc59116_set_blink;	
-+		tlc59116[i].led_cdev.brightness = 0;
-+
-+		INIT_WORK(&tlc59116[i].work, tlc59116_led_work);
-+
-+		err = led_classdev_register(&client->dev, &tlc59116[i].led_cdev);
-+		if (err < 0)
-+			goto exit;
-+	}
-+		
-+        tlc59116_set_mode(client, MODE2_DIM);
-+
-+	/* Turn off LEDs */
-+	for (i = 0; i < chip->bits; i++)
-+		tlc59116_set_gpio(client, i, TLC59116_LED_OFF);
-+
-+	return 0;
-+
-+exit:
-+	while (i--) {
-+		led_classdev_unregister(&tlc59116[i].led_cdev);
-+		cancel_work_sync(&tlc59116[i].work);
-+	}
-+
-+	devm_kfree(&client->dev, tlc59116);
-+	i2c_set_clientdata(client, NULL);
-+
-+	return err;
-+}
-+
-+static int tlc59116_remove(struct i2c_client *client)
-+{
-+	struct tlc59116_led *tlc59116 = i2c_get_clientdata(client);
-+	int i;
-+
-+	for (i = 0; i < tlc59116->chipdef->bits; i++) {
-+		led_classdev_unregister(&tlc59116[i].led_cdev);
-+		cancel_work_sync(&tlc59116[i].work);
-+	}
-+
-+	devm_kfree(&client->dev, tlc59116);
-+	i2c_set_clientdata(client, NULL);
-+
-+	return 0;
-+}
-+
-+static struct i2c_driver tlc59116_driver = {
-+	.driver = {
-+		.name	= "leds-tlc59116",
-+		.owner	= THIS_MODULE,
-+	},
-+	.probe	= tlc59116_probe,
-+	.remove	= tlc59116_remove,
-+	.id_table = tlc59116_id,
-+};
-+
-+module_i2c_driver(tlc59116_driver);
-+
-+MODULE_AUTHOR("Belkin Inc.");
-+MODULE_DESCRIPTION("TLC59116 LED driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/mvebu/patches-3.18/050-leds_tlc59116_document_binding.patch b/target/linux/mvebu/patches-3.18/050-leds_tlc59116_document_binding.patch
new file mode 100644
index 0000000..e55eca3
--- /dev/null
+++ b/target/linux/mvebu/patches-3.18/050-leds_tlc59116_document_binding.patch
@@ -0,0 +1,51 @@
+Document the binding for the TLC59116 LED driver.
+
+Signed-off-by: Andrew Lunn <andrew@lunn.ch>
+---
+ .../devicetree/bindings/leds/leds-tlc59116.txt     | 40 ++++++++++++++++++++++
+ 1 file changed, 40 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt
+@@ -0,0 +1,40 @@
++LEDs connected to tcl59116
++
++Required properties
++- compatible: should be "ti,tlc59116"
++- #address-cells: must be 1
++- #size-cells: must be 0
++- reg: typically 0x68
++
++Each led is represented as a sub-node of the ti,,tlc59116.
++See Documentation/devicetree/bindings/leds/common.txt
++
++LED sub-node properties:
++- reg: number of LED line, 0 to 15
++- label: (optional) name of LED
++- linux,default-trigger : (optional)
++
++Examples:
++
++tlc59116@68 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	compatible = "ti,tlc59116";
++	reg = <0x68>;
++
++	wan@0 {
++		label = "wrt1900ac:amber:wan";
++		reg = <0x0>;
++	};
++
++	2g@2 {
++		label = "wrt1900ac:white:2g";
++		reg = <0x2>;
++	};
++
++	alive@9 {
++		label = "wrt1900ac:green:alive";
++		reg = <0x9>;
++		linux,default_trigger = "heartbeat";
++	};
++};
diff --git a/target/linux/mvebu/patches-3.18/051-leds_tlc59116_add_driver.patch b/target/linux/mvebu/patches-3.18/051-leds_tlc59116_add_driver.patch
new file mode 100644
index 0000000..fd22aef
--- /dev/null
+++ b/target/linux/mvebu/patches-3.18/051-leds_tlc59116_add_driver.patch
@@ -0,0 +1,297 @@
+The TLC59116 is an I2C bus controlled 16-channel LED driver.  Each LED
+output has its own 8-bit fixed-frequency PWM controller to control the
+brightness of the LED.
+
+This is based on a driver from Belkin, but has been extensively
+rewritten.
+
+Signed-off-by: Andrew Lunn <andrew@lunn.ch>
+---
+ drivers/leds/Kconfig         |   8 ++
+ drivers/leds/Makefile        |   1 +
+ drivers/leds/leds-tlc59116.c | 252 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 261 insertions(+)
+ create mode 100644 drivers/leds/leds-tlc59116.c
+
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -446,6 +446,14 @@ config LEDS_TCA6507
+ 	  LED driver chips accessed via the I2C bus.
+ 	  Driver support brightness control and hardware-assisted blinking.
+ 
++config LEDS_TLC59116
++	tristate "LED driver for TLC59116F controllers"
++	depends on LEDS_CLASS && I2C
++	select REGMAP_I2C
++	help
++	  This option enables support for Texas Instruments TLC59116F
++	  LED controller.
++
+ config LEDS_MAX8997
+ 	tristate "LED support for MAX8997 PMIC"
+ 	depends on LEDS_CLASS && MFD_MAX8997
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_LP5562)		+= leds-lp556
+ obj-$(CONFIG_LEDS_LP8501)		+= leds-lp8501.o
+ obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
+ obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
++obj-$(CONFIG_LEDS_TLC59116)		+= leds-tlc59116.o
+ obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
+ obj-$(CONFIG_LEDS_IPAQ_MICRO)		+= leds-ipaq-micro.o
+ obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
+--- /dev/null
++++ b/drivers/leds/leds-tlc59116.c
+@@ -0,0 +1,252 @@
++/*
++ * Copyright 2014 Belkin Inc.
++ * Copyright 2014 Andrew Lunn <andrew@lunn.ch>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License.
++ */
++
++#include <linux/i2c.h>
++#include <linux/leds.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/regmap.h>
++#include <linux/slab.h>
++#include <linux/workqueue.h>
++
++#define TLC59116_LEDS		16
++
++#define TLC59116_REG_MODE1	0x00
++#define MODE1_RESPON_ADDR_MASK	0xF0
++#define MODE1_NORMAL_MODE	(0 << 4)
++#define MODE1_SPEED_MODE	(1 << 4)
++
++#define TLC59116_REG_MODE2	0x01
++#define MODE2_DIM		(0 << 5)
++#define MODE2_BLINK		(1 << 5)
++#define MODE2_OCH_STOP		(0 << 3)
++#define MODE2_OCH_ACK		(1 << 3)
++
++#define TLC59116_REG_PWM(x)	(0x02 + (x))
++
++#define TLC59116_REG_GRPPWM	0x12
++#define TLC59116_REG_GRPFREQ	0x13
++
++/* LED Driver Output State, determine the source that drives LED outputs */
++#define TLC59116_REG_LEDOUT(x)	(0x14 + ((x) >> 2))
++#define TLC59116_LED_OFF	0x0	/* Output LOW */
++#define TLC59116_LED_ON		0x1	/* Output HI-Z */
++#define TLC59116_DIM		0x2	/* Dimming */
++#define TLC59116_BLINK		0x3	/* Blinking */
++#define LED_MASK		0x3
++
++#define ldev_to_led(c)		container_of(c, struct tlc59116_led, ldev)
++#define work_to_led(work)	container_of(work, struct tlc59116_led, work)
++
++struct tlc59116_led {
++	bool active;
++	struct regmap *regmap;
++	unsigned int led_no;
++	struct led_classdev ldev;
++	struct work_struct work;
++};
++
++struct tlc59116_priv {
++	struct tlc59116_led leds[TLC59116_LEDS];
++};
++
++static int
++tlc59116_set_mode(struct regmap *regmap, u8 mode)
++{
++	int err;
++	u8 val;
++
++	if ((mode != MODE2_DIM) && (mode != MODE2_BLINK))
++		mode = MODE2_DIM;
++
++	/* Configure MODE1 register */
++	err = regmap_write(regmap, TLC59116_REG_MODE1, MODE1_NORMAL_MODE);
++	if (err)
++		return err;
++
++	/* Configure MODE2 Reg */
++	val = MODE2_OCH_STOP | mode;
++
++	return regmap_write(regmap, TLC59116_REG_MODE2, val);
++}
++
++static int
++tlc59116_set_led(struct tlc59116_led *led, u8 val)
++{
++	struct regmap *regmap = led->regmap;
++	unsigned int i = (led->led_no % 4) * 2;
++	unsigned int addr = TLC59116_REG_LEDOUT(led->led_no);
++	unsigned int mask = LED_MASK << i;
++
++	val = val << i;
++
++	return regmap_update_bits(regmap, addr, mask, val);
++}
++
++static void
++tlc59116_led_work(struct work_struct *work)
++{
++	struct tlc59116_led *led = work_to_led(work);
++	struct regmap *regmap = led->regmap;
++	int err;
++	u8 pwm;
++
++	pwm = TLC59116_REG_PWM(led->led_no);
++	err = regmap_write(regmap, pwm, led->ldev.brightness);
++	if (err)
++		dev_err(led->ldev.dev, "Failed setting brightness\n");
++}
++
++static void
++tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	struct tlc59116_led *led = ldev_to_led(led_cdev);
++
++	led->ldev.brightness = value;
++	schedule_work(&led->work);
++}
++
++static void
++tlc59116_destroy_devices(struct tlc59116_priv *priv, unsigned int i)
++{
++	while (--i >= 0) {
++		if (priv->leds[i].active) {
++			led_classdev_unregister(&priv->leds[i].ldev);
++			cancel_work_sync(&priv->leds[i].work);
++		}
++	}
++}
++
++static int
++tlc59116_configure(struct device *dev,
++		   struct tlc59116_priv *priv,
++		   struct regmap *regmap)
++{
++	unsigned int i;
++	int err = 0;
++
++	tlc59116_set_mode(regmap, MODE2_DIM);
++	for (i = 0; i < TLC59116_LEDS; i++) {
++		struct tlc59116_led *led = &priv->leds[i];
++
++		if (!led->active)
++			continue;
++
++		led->regmap = regmap;
++		led->led_no = i;
++		led->ldev.brightness_set = tlc59116_led_set;
++		led->ldev.max_brightness = LED_FULL;
++		INIT_WORK(&led->work, tlc59116_led_work);
++		err = led_classdev_register(dev, &led->ldev);
++		if (err < 0) {
++			dev_err(dev, "couldn't register LED %s\n",
++				led->ldev.name);
++			goto exit;
++		}
++		tlc59116_set_led(led, TLC59116_DIM);
++	}
++
++	return 0;
++
++exit:
++	tlc59116_destroy_devices(priv, i);
++	return err;
++}
++
++static const struct regmap_config tlc59116_regmap = {
++	.reg_bits = 8,
++	.val_bits = 8,
++	.max_register = 0x1e,
++};
++
++static int
++tlc59116_probe(struct i2c_client *client,
++	       const struct i2c_device_id *id)
++{
++	struct tlc59116_priv *priv = i2c_get_clientdata(client);
++	struct device *dev = &client->dev;
++	struct device_node *np = client->dev.of_node, *child;
++	struct regmap *regmap;
++	int err, count, reg;
++
++	count = of_get_child_count(np);
++	if (!count || count > TLC59116_LEDS)
++		return -EINVAL;
++
++	if (!i2c_check_functionality(client->adapter,
++		I2C_FUNC_SMBUS_BYTE_DATA))
++		return -EIO;
++
++	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
++	if (!priv)
++		return -ENOMEM;
++
++	regmap = devm_regmap_init_i2c(client, &tlc59116_regmap);
++	if (IS_ERR(regmap)) {
++		err = PTR_ERR(regmap);
++		dev_err(dev, "Failed to allocate register map: %d\n", err);
++		return err;
++	}
++
++	i2c_set_clientdata(client, priv);
++
++	for_each_child_of_node(np, child) {
++		err = of_property_read_u32(child, "reg", &reg);
++		if (err)
++			return err;
++		if (reg < 0 || reg >= TLC59116_LEDS)
++			return -EINVAL;
++		if (priv->leds[reg].active)
++			return -EINVAL;
++		priv->leds[reg].active = true;
++		priv->leds[reg].ldev.name =
++			of_get_property(child, "label", NULL) ? : child->name;
++		priv->leds[reg].ldev.default_trigger =
++			of_get_property(child, "linux,default-trigger", NULL);
++	}
++	return tlc59116_configure(dev, priv, regmap);
++}
++
++static int
++tlc59116_remove(struct i2c_client *client)
++{
++	struct tlc59116_priv *priv = i2c_get_clientdata(client);
++
++	tlc59116_destroy_devices(priv, TLC59116_LEDS);
++
++	return 0;
++}
++
++static const struct of_device_id of_tlc59116_leds_match[] = {
++	{ .compatible = "ti,tlc59116", },
++	{},
++};
++MODULE_DEVICE_TABLE(of, of_tlc59116_leds_match);
++
++static const struct i2c_device_id tlc59116_id[] = {
++	{ "tlc59116" },
++	{},
++};
++MODULE_DEVICE_TABLE(i2c, tlc59116_id);
++
++static struct i2c_driver tlc59116_driver = {
++	.driver = {
++		.name = "tlc59116",
++		.of_match_table = of_match_ptr(of_tlc59116_leds_match),
++	},
++	.probe = tlc59116_probe,
++	.remove = tlc59116_remove,
++	.id_table = tlc59116_id,
++};
++
++module_i2c_driver(tlc59116_driver);
++
++MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("TLC59116 LED driver");