generic/3.18: upgrade to 3.18.10

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45197

1 files changed, 0 insertions, 61 deletions

diff --git a/target/linux/mvebu/patches-3.18/210-xhci_move_marvell_quirks.patch b/target/linux/mvebu/patches-3.18/210-xhci_move_marvell_quirks.patch
deleted file mode 100644
index 2296900..0000000
--- a/target/linux/mvebu/patches-3.18/210-xhci_move_marvell_quirks.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 1e7e4fb66489cc84366656ca5318f1cb61afd4ba Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 24 Feb 2015 18:27:00 +0200
-Subject: usb: XHCI: platform: Move the Marvell quirks after the enabling the
- clocks
-
-The commit 973747928514 ("usb: host: xhci-plat: add support for the Armada
-375/38x XHCI controllers") extended the xhci-plat driver to support the Armada
-375/38x SoCs, mostly by adding a quirk configuring the MBUS window.
-
-However, that quirk was run before the clock the controllers needs has been
-enabled. This usually worked because the clock was first enabled by the
-bootloader, and left as such until the driver is probe, where it tries to
-access the MBUS configuration registers before enabling the clock.
-
-Things get messy when EPROBE_DEFER is involved during the probe, since as part
-of its error path, the driver will rightfully disable the clock. When the
-driver will be reprobed, it will retry to access the MBUS registers, but this
-time with the clock disabled, which hangs forever.
-
-Fix this by running the quirks after the clock has been enabled by the driver.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Cc: <stable@vger.kernel.org> # v3.16+
-Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -87,15 +87,6 @@ static int xhci_plat_probe(struct platfo
- 	if (!res)
- 		return -ENODEV;
- 
--	if (of_device_is_compatible(pdev->dev.of_node,
--				    "marvell,armada-375-xhci") ||
--	    of_device_is_compatible(pdev->dev.of_node,
--				    "marvell,armada-380-xhci")) {
--		ret = xhci_mvebu_mbus_init_quirk(pdev);
--		if (ret)
--			return ret;
--	}
--
- 	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
- 	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- 	if (ret)
-@@ -129,6 +120,15 @@ static int xhci_plat_probe(struct platfo
- 			goto put_hcd;
- 	}
- 
-+	if (of_device_is_compatible(pdev->dev.of_node,
-+				    "marvell,armada-375-xhci") ||
-+	    of_device_is_compatible(pdev->dev.of_node,
-+				    "marvell,armada-380-xhci")) {
-+		ret = xhci_mvebu_mbus_init_quirk(pdev);
-+		if (ret)
-+			return ret;
-+	}
-+
- 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- 	if (ret)
- 		goto disable_clk;