summaryrefslogtreecommitdiff
path: root/target/linux/mxs/files
diff options
context:
space:
mode:
authorZoltan Herpai <wigyori@uid0.hu>2013-10-14 21:22:40 +0000
committerZoltan Herpai <wigyori@uid0.hu>2013-10-14 21:22:40 +0000
commit9e2b69139b569a0e521685b0459fdda47121a93e (patch)
tree14a991a7dcc6ecda0e60d905ee7f47ad919f0ff9 /target/linux/mxs/files
parentbea9d64f4a79561a3644edbf2e6f5c493dfe3b31 (diff)
downloadmtk-20170518-9e2b69139b569a0e521685b0459fdda47121a93e.zip
mtk-20170518-9e2b69139b569a0e521685b0459fdda47121a93e.tar.gz
mtk-20170518-9e2b69139b569a0e521685b0459fdda47121a93e.tar.bz2
mxs: add support for I2SE Duckbill devices
Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 38407
Diffstat (limited to 'target/linux/mxs/files')
-rw-r--r--target/linux/mxs/files/arch/arm/boot/dts/imx28-duckbill.dts118
1 files changed, 118 insertions, 0 deletions
diff --git a/target/linux/mxs/files/arch/arm/boot/dts/imx28-duckbill.dts b/target/linux/mxs/files/arch/arm/boot/dts/imx28-duckbill.dts
new file mode 100644
index 0000000..b102d62
--- /dev/null
+++ b/target/linux/mxs/files/arch/arm/boot/dts/imx28-duckbill.dts
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+ model = "I2SE Duckbill";
+ compatible = "i2se,duckbill", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <8>;
+ vmmc-supply = <&reg_3p3v>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13, PHY Reset */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ led_pins_a: led_gpio@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3003 /* MX28_PAD_AUART0_RX__GPIO_3_0 */
+ 0x3013 /* MX28_PAD_AUART0_TX__GPIO_3_1 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ status = "okay";
+ };
+
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-supply = <&reg_3p3v>;
+ phy-reset-gpios = <&gpio4 13 0>;
+ phy-reset-duration = <100>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a>;
+
+ status {
+ label = "duckbill:green:status";
+ gpios = <&gpio3 0 0>;
+ };
+
+ failure {
+ label = "duckbill:red:status";
+ gpios = <&gpio3 1 0>;
+ };
+ };
+};