Adding .24 support for olpc

kernel compiles fine, but graphic support is broken

to test new kernel version, change
target/linux/olpc/Makefile
from .23.16 to .24

SVN-Revision: 10493

28 files changed, 12422 insertions, 2 deletions

diff --git a/target/linux/olpc/config-2.6.24 b/target/linux/olpc/config-2.6.24
new file mode 100644
index 0000000..41cee4b
--- /dev/null
+++ b/target/linux/olpc/config-2.6.24
@@ -0,0 +1,2219 @@
+# CONFIG_4KSTACKS is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_64BIT is not set
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_ACPI is not set
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AGP is not set
+# CONFIG_AIRO is not set
+CONFIG_AIRO_CS=m
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMIGA_PARTITION is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APM is not set
+# CONFIG_APPLICOM is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+# CONFIG_ARCNET is not set
+CONFIG_ARPD=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_ATA is not set
+# CONFIG_ATALK is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATM is not set
+CONFIG_ATMEL=m
+# CONFIG_ATM_AMBASSADOR is not set
+CONFIG_ATM_BR2684=m
+CONFIG_ATM_BR2684_IPFILTER=y
+CONFIG_ATM_CLIP=m
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+CONFIG_ATM_DUMMY=m
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_LANAI is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+# CONFIG_ATM_NICSTAR is not set
+CONFIG_ATM_TCP=m
+# CONFIG_ATM_ZATM is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUDIT_ARCH is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX88796 is not set
+# CONFIG_B44 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_PROGEAR is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+CONFIG_BCM43XX=m
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+CONFIG_BCM43XX_PIO=y
+# CONFIG_BCM43XX_PIO_MODE is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_BITREVERSE=y
+# CONFIG_BLINK is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLOCK=y
+# CONFIG_BNX2 is not set
+# CONFIG_BONDING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_BOUNCE=y
+# CONFIG_BPQETHER is not set
+CONFIG_BRIDGE=y
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_VLAN=m
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_BT is not set
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIBLUECARD is not set
+CONFIG_BT_HCIBPA10X=m
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIDTL1 is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_SCO=m
+CONFIG_BUG=y
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CASSINI is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_CFG80211=m
+# CONFIG_CGROUPS is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CMDLINE=""
+# CONFIG_CODA_FS is not set
+CONFIG_COMPAT_VDSO=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_CONNECTOR is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CRAMFS is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_AES_586 is not set
+CONFIG_CRYPTO_ALGAPI=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_HASH=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CS5535_GPIO is not set
+# CONFIG_DAB is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DCDBAS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RODATA is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DECNET is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_CUBIC is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="vegas"
+CONFIG_DEFAULT_VEGAS=y
+# CONFIG_DEFAULT_WESTWOOD is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DELL_RBU is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+CONFIG_DEVPORT=y
+# CONFIG_DGRS is not set
+# CONFIG_DISABLE_SUSPEND_VT_SWITCH is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_DISPLAY_SUPPORT=y
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMA_ENGINE is not set
+CONFIG_DMI=y
+CONFIG_DMIID=y
+CONFIG_DNOTIFY=y
+CONFIG_DOUBLEFAULT=y
+CONFIG_DRM=y
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_SAVAGE is not set
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_E100 is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_ECONET is not set
+# CONFIG_EDAC is not set
+# CONFIG_EDD is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_EFS_FS is not set
+CONFIG_ELF_CORE=y
+CONFIG_EMBEDDED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+# CONFIG_EUROTECH_WDT is not set
+CONFIG_EVENTFD=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_EXPORTFS=m
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_FAT_FS=m
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_FB=y
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_EFI is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_GX=y
+CONFIG_FB_GEODE_GX1=y
+CONFIG_FB_GEODE_LX=y
+# CONFIG_FB_HECUBA is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_I810 is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_NVIDIA is not set
+CONFIG_FB_OLPC_DCON=y
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VESA is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+CONFIG_FIB_RULES=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FLATMEM=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+# CONFIG_FORCEDETH is not set
+CONFIG_FORCED_INLINING=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTL is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FW_LOADER=y
+CONFIG_GACT_PROB=y
+# CONFIG_GAMEPORT is not set
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_GENERIC_CPU is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_GEODE_MFGPT_TIMER=y
+# CONFIG_GFS2_FS is not set
+# CONFIG_GPIO_DEVICE is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_HAPPYMEAL is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HFS_FS is not set
+CONFIG_HIBERNATION=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HID_FF is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIPPI is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_CS is not set
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOTPLUG=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HP100 is not set
+# CONFIG_HPET_TIMER is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_HT_IRQ=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_GEODE=y
+# CONFIG_HW_RANDOM_INTEL is not set
+CONFIG_HW_RANDOM_VIA=y
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+CONFIG_I2C=y
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2O is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_I82092 is not set
+# CONFIG_I8K is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_IDE is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_IDE_PROC_FS=y
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_IFB=m
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_IMQ=m
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+CONFIG_IMQ_BEHAVIOR_BA=y
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+CONFIG_IMQ_NUM_DEVS=2
+CONFIG_INET=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+CONFIG_INET_DIAG=m
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IP1000 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_IMQ=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_ROUTE=m
+# CONFIG_IPC_NS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_IPV6_ROUTER_PREF=y
+# CONFIG_IPV6_ROUTE_INFO is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200 is not set
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPX is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_ARPFILTER=m
+# CONFIG_IP_NF_ARPTABLES is not set
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_IP_NF_CONNTRACK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+CONFIG_IP_NF_MATCH_IPRANGE=m
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+CONFIG_IP_NF_MATCH_SET=m
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_SIP=m
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_TFTP=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SET is not set
+CONFIG_IP_NF_SET_HASHSIZE=1024
+CONFIG_IP_NF_SET_IPHASH=m
+CONFIG_IP_NF_SET_IPMAP=m
+CONFIG_IP_NF_SET_IPPORTHASH=m
+CONFIG_IP_NF_SET_IPTREE=m
+CONFIG_IP_NF_SET_IPTREEMAP=m
+CONFIG_IP_NF_SET_MACIPMAP=m
+CONFIG_IP_NF_SET_MAX=256
+CONFIG_IP_NF_SET_NETHASH=m
+CONFIG_IP_NF_SET_PORTMAP=m
+CONFIG_IP_NF_SIP=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_ROUTE=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_SET=m
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_TFTP=m
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+CONFIG_IP_ROUTE_MULTIPATH_DRR=m
+CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
+CONFIG_IP_ROUTE_MULTIPATH_RR=m
+CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IRDA is not set
+# CONFIG_ISA is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISDN is not set
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIFS=m
+CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_I4L is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_IT8712F_WDT is not set
+# CONFIG_ITCO_WDT is not set
+# CONFIG_IXGB is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_JOLIET=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_KEXEC=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYS is not set
+CONFIG_KMOD=y
+# CONFIG_KPROBES is not set
+CONFIG_KTIME_SCALAR=y
+# CONFIG_KVM is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LBD is not set
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_LEDS_ALIX is not set
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MORSE is not set
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LGUEST is not set
+CONFIG_LIBCRC32C=m
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_LOCKD=m
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_LOCKD_V4=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_LSF is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M686 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MACHZ_WDT is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+CONFIG_MAC_PARTITION=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MARKERS is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_MCA is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MD is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MGEODEGX1 is not set
+CONFIG_MGEODE_LX=y
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_MII=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_MINI_FO=y
+CONFIG_MISC_DEVICES=y
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+CONFIG_MKISS=m
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_RICOH_MMC is not set
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_WBSD is not set
+CONFIG_MMU=y
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+# CONFIG_MOUSE_PS2_OLPC is not set
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPSC is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_BLOCK2MTD=y
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_CAFE=y
+# CONFIG_MTD_NAND_CS553X is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_OOPS=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_PCI=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+CONFIG_MTD_ROOTFS_SPLIT=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_TS5500 is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_MTRR is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_NET=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETDEBUG is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_10000 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_LAYER7=m
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PORTSCAN is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_TARGET_CHAOS is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DELUDE is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+# CONFIG_NETPOLL is not set
+# CONFIG_NETROM is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NET_9P is not set
+CONFIG_NET_ACT_GACT=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_MIRRED=m
+# CONFIG_NET_ACT_NAT is not set
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_FC is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_NET_PCI=y
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NET_SB1000 is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_CBQ=m
+# CONFIG_NET_SCH_CLK_CPU is not set
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_ESFQ is not set
+CONFIG_NET_SCH_ESFQ_NFCT=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_RED is not set
+CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_TULIP is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_NET_WIRELESS=y
+CONFIG_NET_WIRELESS_RTNETLINK=y
+# CONFIG_NEW_GPIO is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NFSD is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V2_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFS_FS is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFTL is not set
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_ENABLED=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_SUPPORT=y
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CT_PROTO_GRE=m
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+CONFIG_NF_NAT=y
+# CONFIG_NF_NAT_AMANDA is not set
+CONFIG_NF_NAT_FTP=m
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+CONFIG_NF_NAT_PROTO_GRE=m
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NL80211=y
+# CONFIG_NLS is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_CODEPAGE_1250=m
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+CONFIG_NLS_KOI8_R=m
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+CONFIG_NOHIGHMEM=y
+CONFIG_NORTEL_HERMES=m
+CONFIG_NO_HZ=y
+CONFIG_NR_QUICK=1
+# CONFIG_NS83820 is not set
+CONFIG_NSC_GPIO=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+CONFIG_NVRAM=y
+# CONFIG_OCFS2_FS is not set
+CONFIG_OLPC=y
+CONFIG_OLPC_PM=y
+CONFIG_OPEN_FIRMWARE=y
+# CONFIG_OSF_PARTITION is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+CONFIG_PATA_PLATFORM=m
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC300TOO is not set
+CONFIG_PC8736x_GPIO=m
+# CONFIG_PC87413_WDT is not set
+# CONFIG_PCCARD is not set
+CONFIG_PCI=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_GOANY is not set
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+CONFIG_PCI_GOOLPC=y
+CONFIG_PCI_HERMES=m
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_OLPC=y
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHYLIB is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_PID_NS is not set
+CONFIG_PLIST=y
+CONFIG_PLX_HERMES=m
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_LEGACY=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_STD_PARTITION=""
+# CONFIG_PM_TRACE is not set
+# CONFIG_PM_VERBOSE is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PPP=m
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_PRINTK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_PRISM54 is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILING is not set
+# CONFIG_PROMFS_FS is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_QEMU is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_QUICKLIST=y
+# CONFIG_QUOTA is not set
+# CONFIG_R3964 is not set
+# CONFIG_R8169 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+CONFIG_RAMFS=y
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_RELAY=y
+# CONFIG_RELOCATABLE is not set
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_RFKILL is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_RTC=y
+# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTL8187 is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_SC92031 is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LPFC is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_PAS16 is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCx200 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_CS=m
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_CT82C710 is not set
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SHAPER is not set
+CONFIG_SHMEM=y
+CONFIG_SIGNALFD=y
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+CONFIG_SLAB=y
+CONFIG_SLABINFO=y
+CONFIG_SLHC=m
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC37B787_WDT is not set
+CONFIG_SND=m
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+CONFIG_SND_HWDEP=m
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+CONFIG_SND_MIXER_OSS=m
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_PCM=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_TIMER=m
+# CONFIG_SND_TRIDENT is not set
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SONYPI is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_SSB is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSFDC is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_STANDALONE=y
+# CONFIG_STRIP is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUN_PARTITION is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SWAP=y
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSCTL=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSFS=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSPROF is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_VEGAS=y
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_YEAH=m
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TELCLOCK is not set
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+CONFIG_TIMERFD=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_TINY_SHMEM is not set
+# CONFIG_TIPC is not set
+# CONFIG_TLAN is not set
+CONFIG_TMD_HERMES=m
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TOSHIBA is not set
+# CONFIG_TR is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_TUN is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_TUNER_TEA5761 is not set
+# CONFIG_TYPHOON is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+CONFIG_UID16=y
+# CONFIG_UIO is not set
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_UNIX=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_USB=y
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_APPLETOUCH is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+CONFIG_USB_ATM=m
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_CATC=m
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_EZUSB=y
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SN9C102 is not set
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_DATAFAB=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_USBAT=y
+# CONFIG_USB_STV680 is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_USBNET_MII=m
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_XUSBATM is not set
+CONFIG_USB_YEALINK=m
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USER_NS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_VETH is not set
+# CONFIG_VFAT_FS is not set
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_VGASTATE is not set
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA7111 is not set
+# CONFIG_VIDEO_SAA7114 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SAA7191 is not set
+CONFIG_VIDEO_SELECT=y
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_VIDEO_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VITESSE_PHY is not set
+CONFIG_VLAN_8021Q=y
+CONFIG_VM86=y
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_VORTEX is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_W1 is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_WDTPCI is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WLAN_80211=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_X25 is not set
+CONFIG_X86=y
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+# CONFIG_X86_BIGSMP is not set
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_CMPXCHG=y
+# CONFIG_X86_CPUID is not set
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_ES7000 is not set
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_GENERIC=y
+# CONFIG_X86_GENERICARCH is not set
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_LOCAL_APIC=y
+# CONFIG_X86_MCE is not set
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_PAE is not set
+CONFIG_X86_PC=y
+CONFIG_X86_POPAD_OK=y
+# CONFIG_X86_REBOOTFIXUPS is not set
+# CONFIG_X86_SUMMIT is not set
+CONFIG_X86_TSC=y
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_USE_3DNOW=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_VSMP is not set
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_XADD=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_USER=m
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_YENTA=m
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ZONE_DMA32 is not set
+CONFIG_ZONE_DMA_FLAG=1
diff --git a/target/linux/olpc/files/arch/i386/boot/setup.S b/target/linux/olpc/files-2.6.23/arch/i386/boot/setup.S
index 4cf6e23..4cf6e23 100644
--- a/target/linux/olpc/files/arch/i386/boot/setup.S
+++ b/target/linux/olpc/files-2.6.23/arch/i386/boot/setup.S
diff --git a/target/linux/olpc/files/arch/i386/configs/olpc_defconfig b/target/linux/olpc/files-2.6.23/arch/i386/configs/olpc_defconfig
index f1675e8..f1675e8 100644
--- a/target/linux/olpc/files/arch/i386/configs/olpc_defconfig
+++ b/target/linux/olpc/files-2.6.23/arch/i386/configs/olpc_defconfig
diff --git a/target/linux/olpc/files/arch/i386/kernel/mfgpt.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/mfgpt.c
index 2e62a41..2e62a41 100644
--- a/target/linux/olpc/files/arch/i386/kernel/mfgpt.c
+++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/mfgpt.c
diff --git a/target/linux/olpc/files/arch/i386/kernel/ofw.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/ofw.c
index fdcd936..fdcd936 100644
--- a/target/linux/olpc/files/arch/i386/kernel/ofw.c
+++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/ofw.c
diff --git a/target/linux/olpc/files/arch/i386/kernel/olpc-pm.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-pm.c
index 93149f1..93149f1 100644
--- a/target/linux/olpc/files/arch/i386/kernel/olpc-pm.c
+++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-pm.c
diff --git a/target/linux/olpc/files/arch/i386/kernel/olpc-sleep.S b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-sleep.S
index 9535c9a..9535c9a 100644
--- a/target/linux/olpc/files/arch/i386/kernel/olpc-sleep.S
+++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-sleep.S
diff --git a/target/linux/olpc/files/arch/i386/kernel/olpc-wakeup.S b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-wakeup.S
index a92cc61..a92cc61 100644
--- a/target/linux/olpc/files/arch/i386/kernel/olpc-wakeup.S
+++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-wakeup.S
diff --git a/target/linux/olpc/files/arch/i386/kernel/olpc.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc.c
index d540cb0..d540cb0 100644
--- a/target/linux/olpc/files/arch/i386/kernel/olpc.c
+++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc.c
diff --git a/target/linux/olpc/files/arch/i386/kernel/prom.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/prom.c
index d64bb27..d64bb27 100644
--- a/target/linux/olpc/files/arch/i386/kernel/prom.c
+++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/prom.c
diff --git a/target/linux/olpc/files/arch/i386/pci/olpc.c b/target/linux/olpc/files-2.6.23/arch/i386/pci/olpc.c
index 1518d25..1518d25 100644
--- a/target/linux/olpc/files/arch/i386/pci/olpc.c
+++ b/target/linux/olpc/files-2.6.23/arch/i386/pci/olpc.c
diff --git a/target/linux/olpc/files/drivers/input/mouse/olpc.c b/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.c
index dc575ac..dc575ac 100644
--- a/target/linux/olpc/files/drivers/input/mouse/olpc.c
+++ b/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.c
diff --git a/target/linux/olpc/files/drivers/input/mouse/olpc.h b/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.h
index 426f8b4..426f8b4 100644
--- a/target/linux/olpc/files/drivers/input/mouse/olpc.h
+++ b/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.h
diff --git a/target/linux/olpc/files/drivers/mtd/mtdcore.h b/target/linux/olpc/files-2.6.23/drivers/mtd/mtdcore.h
index a33251f..a33251f 100644
--- a/target/linux/olpc/files/drivers/mtd/mtdcore.h
+++ b/target/linux/olpc/files-2.6.23/drivers/mtd/mtdcore.h
diff --git a/target/linux/olpc/files/drivers/mtd/mtdoops.c b/target/linux/olpc/files-2.6.23/drivers/mtd/mtdoops.c
index cfc28ab..cfc28ab 100644
--- a/target/linux/olpc/files/drivers/mtd/mtdoops.c
+++ b/target/linux/olpc/files-2.6.23/drivers/mtd/mtdoops.c
diff --git a/target/linux/olpc/files/drivers/mtd/onenand/onenand_sim.c b/target/linux/olpc/files-2.6.23/drivers/mtd/onenand/onenand_sim.c
index b806673..b806673 100644
--- a/target/linux/olpc/files/drivers/mtd/onenand/onenand_sim.c
+++ b/target/linux/olpc/files-2.6.23/drivers/mtd/onenand/onenand_sim.c
diff --git a/target/linux/olpc/files/drivers/video/geode/geode_regs.h b/target/linux/olpc/files-2.6.23/drivers/video/geode/geode_regs.h
index 9e75505..9e75505 100644
--- a/target/linux/olpc/files/drivers/video/geode/geode_regs.h
+++ b/target/linux/olpc/files-2.6.23/drivers/video/geode/geode_regs.h
diff --git a/target/linux/olpc/files/drivers/video/geode/suspend_gx.c b/target/linux/olpc/files-2.6.23/drivers/video/geode/suspend_gx.c
index 43c25be..43c25be 100644
--- a/target/linux/olpc/files/drivers/video/geode/suspend_gx.c
+++ b/target/linux/olpc/files-2.6.23/drivers/video/geode/suspend_gx.c
diff --git a/target/linux/olpc/files/drivers/video/olpc_dcon.c b/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.c
index d4ef138..d4ef138 100644
--- a/target/linux/olpc/files/drivers/video/olpc_dcon.c
+++ b/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.c
diff --git a/target/linux/olpc/files/drivers/video/olpc_dcon.h b/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.h
index 6453ca4..6453ca4 100644
--- a/target/linux/olpc/files/drivers/video/olpc_dcon.h
+++ b/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.h
diff --git a/target/linux/olpc/files/include/asm-i386/ofw.h b/target/linux/olpc/files-2.6.23/include/asm-i386/ofw.h
index 79b08b1..79b08b1 100644
--- a/target/linux/olpc/files/include/asm-i386/ofw.h
+++ b/target/linux/olpc/files-2.6.23/include/asm-i386/ofw.h
diff --git a/target/linux/olpc/files/include/asm-i386/olpc.h b/target/linux/olpc/files-2.6.23/include/asm-i386/olpc.h
index 26bc1a8..26bc1a8 100644
--- a/target/linux/olpc/files/include/asm-i386/olpc.h
+++ b/target/linux/olpc/files-2.6.23/include/asm-i386/olpc.h
diff --git a/target/linux/olpc/files/include/asm-i386/prom.h b/target/linux/olpc/files-2.6.23/include/asm-i386/prom.h
index 59d3bdd..59d3bdd 100644
--- a/target/linux/olpc/files/include/asm-i386/prom.h
+++ b/target/linux/olpc/files-2.6.23/include/asm-i386/prom.h
diff --git a/target/linux/olpc/files/include/linux/battery.h b/target/linux/olpc/files-2.6.23/include/linux/battery.h
index 2f856a0..2f856a0 100644
--- a/target/linux/olpc/files/include/linux/battery.h
+++ b/target/linux/olpc/files-2.6.23/include/linux/battery.h
diff --git a/target/linux/olpc/files/sound/pci/cs5535audio/cs5535audio_olpc.c b/target/linux/olpc/files-2.6.23/sound/pci/cs5535audio/cs5535audio_olpc.c
index 791be73..791be73 100644
--- a/target/linux/olpc/files/sound/pci/cs5535audio/cs5535audio_olpc.c
+++ b/target/linux/olpc/files-2.6.23/sound/pci/cs5535audio/cs5535audio_olpc.c
diff --git a/target/linux/olpc/image/Makefile b/target/linux/olpc/image/Makefile
index a245d72..23aee45 100644
--- a/target/linux/olpc/image/Makefile
+++ b/target/linux/olpc/image/Makefile
@@ -39,7 +39,7 @@ ifeq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),y)
 endif
 
 define Image/Prepare
-	cp $(LINUX_DIR)/arch/i386/boot/bzImage $(KDIR)/bzImage
+	cp $(LINUX_DIR)/arch/*86/boot/bzImage $(KDIR)/bzImage
 	$(call Image/Prepare/bootscript)
 endef
   
diff --git a/target/linux/olpc/image/olpc.fth b/target/linux/olpc/image/olpc.fth
index a23cdd4..3d284d2 100644
--- a/target/linux/olpc/image/olpc.fth
+++ b/target/linux/olpc/image/olpc.fth
@@ -1,4 +1,4 @@
 \ Boot script
 " u:\boot\vmlinuz" to boot-device
-" block2mtd.block2mtd=/dev/sda2,65536,rootfs root=/dev/mtdblock1 rootfstype=squashfs init=/etc/preinit rootdelay=5 noinitrd console=tty0 quiet" to boot-file
+" block2mtd.block2mtd=/dev/sda2,65536,rootfs root=/dev/mtdblock1 rootfstype=squashfs init=/etc/preinit noinitrd console=tty0" to boot-file
 boot
diff --git a/target/linux/olpc/patches-2.6.24/100-olpc.patch b/target/linux/olpc/patches-2.6.24/100-olpc.patch
new file mode 100644
index 0000000..b694ef4
--- /dev/null
+++ b/target/linux/olpc/patches-2.6.24/100-olpc.patch
@@ -0,0 +1,10201 @@
+diff -purN linux_2.6.24_org/arch/x86/Kconfig linux_2.6.24_olpc/arch/x86/Kconfig
+--- linux_2.6.24_org/arch/x86/Kconfig	2008-02-15 20:11:57.000000000 +0000
++++ linux_2.6.24_olpc/arch/x86/Kconfig	2008-02-15 18:59:21.000000000 +0000
+@@ -1415,6 +1415,9 @@ config PCI_GODIRECT
+ config PCI_GOANY
+ 	bool "Any"
+ 
++config PCI_GOOLPC
++	bool "OLPC"
++
+ endchoice
+ 
+ config PCI_BIOS
+@@ -1425,7 +1428,7 @@ config PCI_BIOS
+ # x86-64 doesn't support PCI BIOS access from long mode so always go direct.
+ config PCI_DIRECT
+ 	bool
+-	depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
++	depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS)
+ 	default y
+ 
+ config PCI_MMCONFIG
+@@ -1442,6 +1445,11 @@ config PCI_MMCONFIG
+ 	bool "Support mmconfig PCI config space access"
+ 	depends on X86_64 && PCI && ACPI
+ 
++config PCI_OLPC
++	bool 
++	depends on PCI && PCI_GOOLPC
++	default y
++
+ config DMAR
+ 	bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
+ 	depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL
+@@ -1561,6 +1569,21 @@ config K8_NB
+ 	def_bool y
+ 	depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
+ 
++config OLPC
++	bool "OLPC Support"
++	default n
++	help
++	  Add OLPC Support
++
++config OLPC_PM
++	bool "OLPC power management support"
++	default n
++	depends on OLPC
++
++config OPEN_FIRMWARE
++	bool "Support for Open Firmware"
++	default y if OLPC
++
+ source "drivers/pcmcia/Kconfig"
+ 
+ source "drivers/pci/hotplug/Kconfig"
+diff -purN linux_2.6.24_org/arch/x86/kernel/Makefile_32 linux_2.6.24_olpc/arch/x86/kernel/Makefile_32
+--- linux_2.6.24_org/arch/x86/kernel/Makefile_32	2008-02-15 20:11:58.000000000 +0000
++++ linux_2.6.24_olpc/arch/x86/kernel/Makefile_32	2008-02-15 18:59:25.000000000 +0000
+@@ -49,6 +49,13 @@ obj-y				+= pcspeaker.o
+ 
+ obj-$(CONFIG_SCx200)		+= scx200_32.o
+ 
++obj-$(CONFIG_OLPC)		+= olpc.o
++obj-$(CONFIG_OLPC_PM)		+= olpc-pm.o olpc-wakeup.o
++obj-$(CONFIG_OPEN_FIRMWARE)	+= ofw.o
++obj-$(PROM_FS)			+= promfs.o
++
++
++
+ # vsyscall_32.o contains the vsyscall DSO images as __initdata.
+ # We must build both images before we can assemble it.
+ # Note: kbuild does not track this dependency due to usage of .incbin
+diff -purN linux_2.6.24_org/arch/x86/kernel/ofw.c linux_2.6.24_olpc/arch/x86/kernel/ofw.c
+--- linux_2.6.24_org/arch/x86/kernel/ofw.c	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/ofw.c	2008-02-15 18:59:25.000000000 +0000
+@@ -0,0 +1,100 @@
++/*
++ * ofw.c - Open Firmware client interface for 32-bit systems.
++ * This code is intended to be portable to any 32-bit Open Firmware
++ * implementation with a standard client interface that can be
++ * called when Linux is running.
++ *
++ * Copyright (C) 2007  Mitch Bradley <wmb@firmworks.com>
++ * Copyright (C) 2007  Andres Salomon <dilinger@debian.org>
++ */
++
++#include <stdarg.h>
++#include <linux/spinlock.h>
++#include <linux/module.h>
++#include <asm/ofw.h>
++
++
++int (*call_firmware)(int *);
++
++static DEFINE_SPINLOCK(prom_lock);
++
++#define MAXARGS 20
++
++/*
++ * The return value from ofw() in all cases is 0 if the attempt to call the
++ * function succeeded, <0 otherwise.  That return value is from the
++ * gateway function only.  Any results from the called function are returned
++ * via output argument pointers. 
++ *
++ * Here are call templates for all the standard OFW client services:
++ *
++ * ofw("test", 1, 1, namestr, &missing);
++ * ofw("peer", 1, 1, phandle, &sibling_phandle);
++ * ofw("child", 1, 1, phandle, &child_phandle);
++ * ofw("parent", 1, 1, phandle, &parent_phandle);
++ * ofw("instance_to_package", 1, 1, ihandle, &phandle);
++ * ofw("getproplen", 2, 1, phandle, namestr, &proplen);
++ * ofw("getprop", 4, 1, phandle, namestr, bufaddr, buflen, &size);
++ * ofw("nextprop", 3, 1, phandle, previousstr, bufaddr, &flag);
++ * ofw("setprop", 4, 1, phandle, namestr, bufaddr, len, &size);
++ * ofw("canon", 3, 1, devspecstr, bufaddr, buflen, &length);
++ * ofw("finddevice", 1, 1, devspecstr, &phandle);
++ * ofw("instance-to-path", 3, 1, ihandle, bufaddr, buflen, &length);
++ * ofw("package-to-path", 3, 1, phandle, bufaddr, buflen, &length);
++ * ofw("call_method", numin, numout, in0, in1, ..., &out0, &out1, ...);
++ * ofw("open", 1, 1, devspecstr, &ihandle);
++ * ofw("close", 1, 0, ihandle);
++ * ofw("read", 3, 1, ihandle, addr, len, &actual);
++ * ofw("write", 3, 1, ihandle, addr, len, &actual);
++ * ofw("seek", 3, 1, ihandle, pos_hi, pos_lo, &status);
++ * ofw("claim", 3, 1, virtaddr, size, align, &baseaddr);
++ * ofw("release", 2, 0, virtaddr, size);
++ * ofw("boot", 1, 0, bootspecstr);
++ * ofw("enter", 0, 0);
++ * ofw("exit", 0, 0);
++ * ofw("chain", 5, 0, virtaddr, size, entryaddr, argsaddr, len);
++ * ofw("interpret", numin+1, numout+1, cmdstr, in0, ..., &catchres, &out0, ...);
++ * ofw("set-callback", 1, 1, newfuncaddr, &oldfuncaddr);
++ * ofw("set-symbol-lookup", 2, 0, symtovaladdr, valtosymaddr);
++ * ofw("milliseconds", 0, 1, &ms);
++ */
++
++int ofw(char *name, int numargs, int numres, ...)
++{
++	va_list ap;
++	int argarray[MAXARGS+3];
++	int argnum = 3;
++	int retval;
++	int *intp;
++	unsigned long flags;
++
++	if (!call_firmware)
++		return -1;
++	if ((numargs + numres) > MAXARGS)
++		return -1;	/* spit out an error? */
++
++	argarray[0] = (int) name;
++	argarray[1] = numargs;
++	argarray[2] = numres;
++
++	va_start(ap, numres);
++	while (numargs) {
++		argarray[argnum++] = va_arg(ap, int);
++		numargs--;
++	}
++
++	spin_lock_irqsave(&prom_lock, flags);
++	retval = call_firmware(argarray);
++	spin_unlock_irqrestore(&prom_lock, flags);
++
++	if (retval == 0) {
++		while (numres) {
++			intp = va_arg(ap, int *);
++			*intp = argarray[argnum++];
++			numres--;
++		}
++	}
++	va_end(ap);
++	return retval;
++}
++EXPORT_SYMBOL(ofw);
+diff -purN linux_2.6.24_org/arch/x86/kernel/olpc.c linux_2.6.24_olpc/arch/x86/kernel/olpc.c
+--- linux_2.6.24_org/arch/x86/kernel/olpc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/olpc.c	2008-02-15 18:59:25.000000000 +0000
+@@ -0,0 +1,287 @@
++/* Support for the OLPC DCON and OLPC EC access
++ * Copyright (C) 2006, Advanced Micro Devices, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/autoconf.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/mc146818rtc.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++
++#include <asm/olpc.h>
++#include <asm/ofw.h>
++
++/* This is our new multi-purpose structure used to contain the
++ * information about the platform that we detect
++ */
++
++struct olpc_platform_t olpc_platform_info;
++EXPORT_SYMBOL_GPL(olpc_platform_info);
++
++/*********************************************************************
++ *		EC locking and access
++ *********************************************************************/
++
++static DEFINE_SPINLOCK(ec_lock);
++
++/* what the timeout *should* be (in ms) */
++#define EC_BASE_TIMEOUT 20
++
++/* the timeout that bugs in the EC might force us to actually use */
++static int ec_timeout = EC_BASE_TIMEOUT;
++
++static int __init olpc_ec_timeout_set(char *str)
++{
++	if (get_option(&str, &ec_timeout) != 1) {
++		ec_timeout = EC_BASE_TIMEOUT;
++		printk(KERN_ERR "olpc-ec:  invalid argument to "
++				"'olpc_ec_timeout=', ignoring!\n");
++	}
++	printk(KERN_DEBUG "olpc-ec:  using %d ms delay for EC commands.\n",
++			ec_timeout);
++	return 1;
++}
++__setup("olpc_ec_timeout=", olpc_ec_timeout_set);
++
++/*
++ * These *bf_status functions return whether the buffers are full or not.
++ */
++
++static inline unsigned int ibf_status(unsigned int port)
++{
++	return !!(inb(port) & 0x02);
++}
++
++static inline unsigned int obf_status(unsigned int port)
++{
++	return inb(port) & 0x01;
++}
++
++#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d))
++static int __wait_on_ibf(unsigned int line, unsigned int port, int desired)
++{
++	unsigned int timeo;
++	int state = ibf_status(port);
++
++	for (timeo = ec_timeout; state != desired && timeo; timeo--) {
++		mdelay(1);
++		state = ibf_status(port);
++	}
++
++	if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
++			timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
++		printk(KERN_WARNING "olpc-ec:  %d: waited %u ms for IBF!\n",
++				line, ec_timeout - timeo);
++	}
++
++	return !(state == desired);
++}
++
++#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d))
++static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
++{
++	unsigned int timeo;
++	int state = obf_status(port);
++
++	for (timeo = ec_timeout; state != desired && timeo; timeo--) {
++		mdelay(1);
++		state = obf_status(port);
++	}
++
++	if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
++			timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
++		printk(KERN_WARNING "olpc-ec:  %d: waited %u ms for OBF!\n",
++				line, ec_timeout - timeo);
++	}
++
++	return !(state == desired);
++}
++
++int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
++		unsigned char *outbuf,  size_t outlen)
++{
++	unsigned long flags;
++	int ret = -EIO;
++	int i;
++
++	spin_lock_irqsave(&ec_lock, flags);
++
++	/* Clear OBF */
++	for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++)
++		inb(0x68);
++	if (i == 10) {
++		printk(KERN_ERR "olpc-ec:  timeout while attempting to "
++				"clear OBF flag!\n");
++		goto err;
++	}
++
++	if (wait_on_ibf(0x6c, 0)) {
++		printk(KERN_ERR "olpc-ec:  timeout waiting for EC to "
++				"quiesce!\n");
++		goto err;
++	}
++
++restart:
++	/*
++	 * Note that if we time out during any IBF checks, that's a failure;
++	 * we have to return.  There's no way for the kernel to clear that.
++	 *
++	 * If we time out during an OBF check, we can restart the command;
++	 * reissuing it will clear the OBF flag, and we should be alright.
++	 * The OBF flag will sometimes misbehave due to what we believe
++	 * is a hardware quirk..
++	 */
++	printk(KERN_DEBUG "olpc-ec:  running cmd 0x%x\n", cmd);
++	outb(cmd, 0x6c);
++
++	if (wait_on_ibf(0x6c, 0)) {
++		printk(KERN_ERR "olpc-ec:  timeout waiting for EC to read "
++				"command!\n");
++		goto err;
++	}
++
++	if (inbuf && inlen) {
++		/* write data to EC */
++		for (i = 0; i < inlen; i++) {
++			if (wait_on_ibf(0x6c, 0)) {
++				printk(KERN_ERR "olpc-ec:  timeout waiting for"
++						" EC accept data!\n");
++				goto err;
++			}
++			printk(KERN_DEBUG "olpc-ec:  sending cmd arg 0x%x\n",
++					inbuf[i]);
++			outb(inbuf[i], 0x68);
++		}
++	}
++	if (outbuf && outlen) {
++		/* read data from EC */
++		for (i = 0; i < outlen; i++) {
++			if (wait_on_obf(0x6c, 1)) {
++				printk(KERN_ERR "olpc-ec:  timeout waiting for"
++						" EC to provide data!\n");
++				goto restart;
++			}
++			outbuf[i] = inb(0x68);
++			printk(KERN_DEBUG "olpc-ec:  received 0x%x\n",
++					outbuf[i]);
++		}
++	}
++
++	ret = 0;
++err:
++	spin_unlock_irqrestore(&ec_lock, flags);
++	return ret;
++}
++EXPORT_SYMBOL_GPL(olpc_ec_cmd);
++
++/*********************************************************************
++ *		DCON stuff
++ *********************************************************************/
++
++static void __init
++ec_detect(void)
++{
++	olpc_ec_cmd(0x08, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1);
++}
++
++/* Check to see if this version of the OLPC board has VSA built
++ * in, and set a flag
++ */
++
++static void __init vsa_detect(void)
++{
++	u16 rev;
++
++	outw(0xFC53, 0xAC1C);
++	outw(0x0003, 0xAC1C);
++
++	rev = inw(0xAC1E);
++
++	if (rev == 0x4132)
++		olpc_platform_info.flags |= OLPC_F_VSA;
++}
++
++static void __init platform_detect(void)
++{
++	size_t propsize;
++	u32 rev;
++
++	if (ofw("getprop", 4, 1, NULL, "board-revision-int", &rev, 4,
++			&propsize) || propsize != 4) {
++		printk(KERN_ERR "ofw: getprop call failed!\n");
++		rev = 0;
++	}
++	olpc_platform_info.boardrev = be32_to_cpu(rev);
++}
++
++static int olpc_dcon_present = -1;
++module_param(olpc_dcon_present, int, 0444);
++
++/* REV_A CMOS map:
++ * bit 440;  DCON present bit
++ */
++
++#define OLPC_CMOS_DCON_OFFSET (440 / 8)
++#define OLPC_CMOS_DCON_MASK   0x01
++
++static int __init olpc_init(void)
++{
++	unsigned char *romsig;
++
++	spin_lock_init(&ec_lock);
++
++	romsig = ioremap(0xffffffc0, 16);
++
++	if (!romsig)
++		return 0;
++
++	if (strncmp(romsig, "CL1   Q", 7))
++		goto unmap;
++	if (strncmp(romsig+6, romsig+13, 3)) {
++		printk(KERN_INFO "OLPC BIOS signature looks invalid. Assuming not OLPC\n");
++		goto unmap;
++	}
++	printk(KERN_INFO "OLPC board with OpenFirmware: %.16s\n", romsig);
++
++	olpc_platform_info.flags |= OLPC_F_PRESENT;
++
++	/* Get the platform revision */
++	platform_detect();
++
++	/* If olpc_dcon_present isn't set by the command line, then
++	 * "detect" it
++	 */
++
++	if (olpc_dcon_present == -1) {
++		/* B1 and greater always has a DCON */
++		if (olpc_board_at_least(olpc_board(0xb1)))
++			olpc_dcon_present = 1;
++	}
++
++	if (olpc_dcon_present)
++		olpc_platform_info.flags |= OLPC_F_DCON;
++
++	/* Get the EC revision */
++	ec_detect();
++
++	/* Check to see if the VSA exists */
++	vsa_detect();
++
++	printk(KERN_INFO "OLPC board revision: %s%X (EC=%x)\n",
++			((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
++			olpc_platform_info.boardrev >> 4,
++			olpc_platform_info.ecver);
++
++ unmap:
++	iounmap(romsig);
++
++	return 0;
++}
++
++postcore_initcall(olpc_init);
+diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-pm.c linux_2.6.24_olpc/arch/x86/kernel/olpc-pm.c
+--- linux_2.6.24_org/arch/x86/kernel/olpc-pm.c	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/olpc-pm.c	2008-02-15 18:59:26.000000000 +0000
+@@ -0,0 +1,946 @@
++/* olpc-pm.c
++ * © 2006 Red Hat, Inc.
++ * Portions also copyright 2006 Advanced Micro Devices, Inc.
++ * GPLv2
++ */
++
++#include <linux/kernel.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/input.h>
++#include <linux/suspend.h>
++#include <linux/bootmem.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++#include <linux/mc146818rtc.h>
++#include <asm/io.h>
++
++#include <asm/olpc.h>
++
++/* A few words about accessing the ACPI and PM registers.  Long story short,
++   byte and word accesses of the ACPI and PM registers is broken.  The only
++   way to do it really correctly is to use dword accesses, which we do
++   throughout this code.  For more details, please consult Eratta 17 and 18
++   here:
++
++   http://www.amd.com/files/connectivitysolutions/geode/geode_gx/34472D_CS5536_B1_specupdate.pdf
++*/
++
++#define PM_IRQ 3
++
++#define CS5536_PM_PWRBTN (1 << 8)
++#define CS5536_PM_RTC    (1 << 10)
++#define CS5536_PM_WAK    (1 << 15)
++
++#define GPIO_WAKEUP_EC (1 << 31)
++#define GPIO_WAKEUP_LID (1 << 30)
++
++#define PM_MODE_NORMAL 0
++#define PM_MODE_TEST   1
++#define PM_MODE_MAX    2
++
++/* These, and the battery EC commands, should be in an olpc.h. */
++#define EC_WRITE_SCI_MASK 0x1b
++#define EC_READ_SCI_MASK  0x1c
++
++extern void do_olpc_suspend_lowlevel(void);
++
++static struct {
++	unsigned long address;
++	unsigned short segment;
++} ofw_bios_entry = { 0, __KERNEL_CS };
++
++static int olpc_pm_mode = PM_MODE_NORMAL;
++static unsigned long acpi_base;
++static unsigned long pms_base;
++static int sci_irq;
++static int olpc_lid_flag;
++
++static struct input_dev *pm_inputdev;
++static struct input_dev *lid_inputdev;
++static struct input_dev *ebook_inputdev;
++static struct platform_suspend_ops olpc_pm_ops;
++
++static int gpio_wake_events = 0;
++static int ebook_state = -1;
++static u16 olpc_wakeup_mask = 0;
++
++static unsigned int test_timeout = 0;
++static char *wackup_source = "none";
++
++struct platform_device olpc_powerbutton_dev = {
++	.name = "powerbutton",
++	.id = -1,
++};
++
++struct platform_device olpc_lid_dev = {
++	.name = "lid",
++	.id = -1,
++};
++
++static void __init init_ebook_state(void)
++{
++	if (olpc_ec_cmd(0x2a, NULL, 0, (unsigned char *) &ebook_state, 1)) {
++		printk(KERN_WARNING "olpc-pm:  failed to get EBOOK state!\n");
++		ebook_state = 0;
++	}
++	ebook_state &= 1;
++
++	/* the input layer needs to know what value to default to as well */
++	input_report_switch(ebook_inputdev, SW_TABLET_MODE, ebook_state);
++	input_sync(ebook_inputdev);
++}
++
++static void (*battery_callback)(unsigned long);
++static DEFINE_SPINLOCK(battery_callback_lock);
++
++/* propagate_events is non-NULL if run from workqueue,
++   NULL when called at init time to flush SCI queue */
++static void process_sci_queue(struct work_struct *propagate_events)
++{
++	unsigned char data = 0;
++	unsigned char battery_events = 0;
++	int ret;
++
++	do {
++		ret = olpc_ec_cmd(0x84, NULL, 0, &data, 1);
++		if (!ret) {
++			printk(KERN_DEBUG "olpc-pm:  SCI 0x%x received\n",
++					data);
++
++			if (wackup_source && !strcmp(wackup_source, "sci")) {
++				/*
++				 * XXX: in order for this to not be racy, we
++				 * need assurance that we will never get
++				 * preempted by olpc_do_sleep here!
++				 */
++				switch (data) {
++				case EC_SCI_SRC_EMPTY:
++					wackup_source = "empty sci";
++					break;
++				case EC_SCI_SRC_GAME:
++					wackup_source = "key press";
++					break;
++				case EC_SCI_SRC_BATTERY:
++					wackup_source = "battery";
++					break;
++				case EC_SCI_SRC_BATSOC:
++					wackup_source = "battery state change";
++					break;
++				case EC_SCI_SRC_BATERR:
++					wackup_source = "battery error";
++					break;
++				case EC_SCI_SRC_EBOOK:
++					wackup_source = "ebook";
++					break;
++				case EC_SCI_SRC_WLAN:
++					wackup_source = "wlan packet";
++					break;
++				case EC_SCI_SRC_ACPWR:
++					wackup_source = "ac power";
++					break;
++				default:
++					wackup_source = "unknown";
++				}
++			}
++
++			if (data & (EC_SCI_SRC_BATERR | EC_SCI_SRC_BATSOC |
++					EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR))
++				battery_events |= data;
++			else if (data == EC_SCI_SRC_EBOOK) {
++				ebook_state = !ebook_state;
++				if (propagate_events) {
++					input_report_switch(ebook_inputdev,
++						SW_TABLET_MODE, ebook_state);
++					input_sync(ebook_inputdev);
++				}
++			}
++		}
++	} while (data && !ret);
++
++	if (battery_events && battery_callback && propagate_events) {
++		void (*cbk)(unsigned long);
++		
++		/* Older EC versions didn't distinguish between AC and battery
++		   events */
++		if (olpc_platform_info.ecver < 0x51)
++			battery_events = EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR;
++
++		spin_lock(&battery_callback_lock);
++		cbk = battery_callback;
++		spin_unlock(&battery_callback_lock);
++
++		cbk(battery_events);
++	}
++
++	if (ret)
++		printk(KERN_WARNING "Failed to clear SCI queue!\n");
++}
++
++static DECLARE_WORK(sci_work, process_sci_queue);
++
++void olpc_register_battery_callback(void (*f)(unsigned long))
++{
++	spin_lock(&battery_callback_lock);
++	battery_callback = f;
++	spin_unlock(&battery_callback_lock);
++}
++EXPORT_SYMBOL_GPL(olpc_register_battery_callback);
++
++void olpc_deregister_battery_callback(void)
++{
++	spin_lock(&battery_callback_lock);
++	battery_callback = NULL;
++	spin_unlock(&battery_callback_lock);
++	cancel_work_sync(&sci_work);
++}
++EXPORT_SYMBOL_GPL(olpc_deregister_battery_callback);
++
++
++static int olpc_pm_interrupt(int irq, void *id)
++{
++	uint32_t sts, gpe = 0;
++
++	sts = inl(acpi_base + PM1_STS);
++	outl(sts | 0xFFFF, acpi_base + PM1_STS);
++
++	if (olpc_board_at_least(olpc_board(0xb2))) {
++		gpe = inl(acpi_base + PM_GPE0_STS);
++		outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
++	}
++
++	if (sts & CS5536_PM_PWRBTN) {
++		if (!wackup_source)
++			wackup_source = "power button";
++		printk(KERN_DEBUG "olpm-pm:  PM_PWRBTN %sevent received\n",
++				sts & CS5536_PM_WAK ? "wakeup " : "");
++		if (!(sts & CS5536_PM_WAK)) {
++			input_report_key(pm_inputdev, KEY_POWER, 1);
++			input_sync(pm_inputdev);
++			/* Do we need to delay this? */
++			input_report_key(pm_inputdev, KEY_POWER, 0);
++			input_sync(pm_inputdev);
++		}
++	}
++
++	if (gpe & GPIO_WAKEUP_EC) {
++		geode_gpio_clear(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
++		if (!wackup_source)
++			wackup_source = "sci";
++		schedule_work(&sci_work);
++	}
++
++	if (gpe & GPIO_WAKEUP_LID) {
++		/* Disable events */
++		geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++			
++		/* Clear the edge */
++			
++		if (olpc_lid_flag)
++			geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
++		else
++			geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
++
++		/* Clear the status too */
++		geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
++		geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
++
++		/* The line is high when the LID is open, but SW_LID
++		 * should be high when the LID is closed, so we pass the old
++		 * value of olpc_lid_flag
++		 */
++
++		input_report_switch(lid_inputdev, SW_LID, olpc_lid_flag);
++		input_sync(lid_inputdev);
++		if (!wackup_source)
++			wackup_source = "lid";
++
++		/* Swap the status */
++		olpc_lid_flag = !olpc_lid_flag;
++
++		if (olpc_lid_flag)
++			geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
++		else
++			geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
++
++		/* re-enable the event */
++		geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++	}
++
++	return IRQ_HANDLED;
++}
++
++int olpc_ec_mask_set(u8 bits)
++{
++	int ret;
++	u8 byte;
++
++	ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &byte, 1);
++	if (ret) { 
++		printk(KERN_ERR "olpc-pm:  error getting SCI mask: %d\n", ret);
++		return ret;
++	}
++	/* the high bit is unused, if it is ever unset, that is a good sign
++	   sign of EC communication corruption! */
++	WARN_ON(!(byte & 0x80));
++
++	byte |= bits;
++	ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &byte, 1, NULL, 0);
++	if (ret)
++		printk(KERN_ERR "olpc-pm:  error setting SCI mask: %d\n", ret);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(olpc_ec_mask_set);
++
++int olpc_ec_mask_unset(u8 bits)
++{
++	int ret;
++	u8 byte;
++
++	ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &byte, 1);
++	if (ret) { 
++		printk(KERN_ERR "olpc-pm:  error getting SCI mask: %d\n", ret);
++		return ret;
++	}
++	/* the high bit is unused, if it is ever unset, that is a good sign
++	   sign of EC communication corruption! */
++	WARN_ON(!(byte & 0x80));
++
++	byte &= ~bits;
++	ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &byte, 1, NULL, 0);
++	if (ret)
++		printk(KERN_ERR "olpc-pm:  error setting SCI mask: %d\n", ret);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(olpc_ec_mask_unset);
++
++/*
++ * For now, only support STR.  We also don't support suspending on
++ * B1s, due to difficulties with the cafe FPGA.
++ */
++static int olpc_pm_state_valid(suspend_state_t pm_state)
++{
++        if (pm_state == PM_SUSPEND_MEM && olpc_board_at_least(olpc_board(0xb2)))
++                return 1;
++
++        return 0;
++}
++
++/* This is a catchall function for operations that just don't belong
++ * anywhere else.  Later we will evaluate if these belong in the
++ * individual device drivers or the firmware.
++ * If you add something to this function, please explain yourself with
++ * a comment.
++ */
++
++extern void gxfb_flatpanel_control(int state);
++
++static u32 gpio_wakeup[2];
++static u64 irq_sources[4];
++static u64 mfgpt_irq_msr, mfgpt_nr_msr;
++
++void olpc_fixup_wakeup(void)
++{
++	u32 base = geode_gpio_base();
++	int i;
++
++	/* Enable the flatpanel sequencing as early as possible, because
++	   it takes ~64ms to resume.  This probably belongs in the firmware */
++
++	//gxfb_flatpanel_control(1);
++
++	/* Tell the EC to stop inhibiting SCIs */
++	olpc_ec_cmd(0x34, NULL, 0, NULL, 0);
++
++	/* Restore the interrupt sources */
++	wrmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
++	wrmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
++	wrmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
++	wrmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
++
++	/* Restore the X and Y sources for GPIO */
++	outl(gpio_wakeup[0], base + GPIO_MAP_X);
++	outl(gpio_wakeup[1], base + GPIO_MAP_Y);
++
++	/* Resture the MFGPT MSRs */
++	wrmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
++	wrmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
++
++	for (i=0;i<2;i++) {
++		/* tell the wireless module to restart USB communication */
++		olpc_ec_cmd(0x24, NULL, 0, NULL, 0);
++	}
++
++	/* Turn all events on */
++	olpc_ec_mask_set(EC_SCI_SRC_ALL);
++}
++
++void olpc_fixup_sleep(void)
++{
++	u32 base = geode_gpio_base();
++	int i;
++
++	/* Save the X and Y sources for GPIO */
++	gpio_wakeup[0] = inl(base + GPIO_MAP_X);
++	gpio_wakeup[1] = inl(base + GPIO_MAP_Y);
++
++	/* Save the Y and Z  unrestricted sources */
++
++	rdmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
++	rdmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
++	rdmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
++	rdmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
++
++	/* Turn off the MFGPT timers on the way down */
++
++	for(i = 0; i < 8; i++) {
++		u32 val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
++
++		if (val & MFGPT_SETUP_SETUP) {
++			val &= ~MFGPT_SETUP_CNTEN;
++			geode_mfgpt_write(i, MFGPT_REG_SETUP, val);
++		}
++	}
++
++	/* Save the MFGPT MSRs */
++	rdmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
++	rdmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
++
++	if (device_may_wakeup(&olpc_powerbutton_dev.dev))
++		olpc_wakeup_mask |= CS5536_PM_PWRBTN;
++	else
++		olpc_wakeup_mask &= ~(CS5536_PM_PWRBTN);
++
++	if (device_may_wakeup(&olpc_lid_dev.dev)) {
++		geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++		gpio_wake_events |= GPIO_WAKEUP_LID;
++	} else {
++		geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++		gpio_wake_events &= ~(GPIO_WAKEUP_LID);
++	}
++
++	/* We don't want to wake up on superfluous events */
++	olpc_ec_mask_unset(EC_SCI_SRC_BATSOC | EC_SCI_SRC_ACPWR);
++
++	/* 
++	 * Cmd 0x32 tells the EC that we're going into suspend; this was
++	 * added to work around hardware races related to SCI events.  This
++	 * should cause the EC to inhibit further SCIs while MAIN_ON is
++	 * transitioning low.
++	 *
++	 * There's also some sort of EC race whereby the EC gets its
++	 * IBF/OBF flags confused and all future communication (after
++	 * resuming) fails if we suspend too soon after updating
++	 * the EC SCI mask.  Having this command after updating the
++	 * SCI mask allows the EC enough time to finish doing what it's
++	 * doing.
++	 */
++	olpc_ec_cmd(0x32, NULL, 0, NULL, 0);
++}
++
++static int olpc_pm_enter(suspend_state_t pm_state)
++{
++        /* Only STR is supported */
++        if (pm_state != PM_SUSPEND_MEM)
++                return -EINVAL;
++
++	olpc_fixup_sleep();
++
++	/* Set the GPIO wakeup bits */
++	outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
++	outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
++
++        /* Save CPU state */
++        do_olpc_suspend_lowlevel();
++
++	olpc_fixup_wakeup();
++
++	/* Restore the SCI wakeup events */
++	outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
++
++	return 0;
++}
++
++int asmlinkage olpc_do_sleep(u8 sleep_state)
++{
++	void *pgd_addr = __va(read_cr3());
++	printk(KERN_ERR "olpc_do_sleep!\n"); /* this needs to remain here so
++					      * that gcc doesn't optimize
++					      * away our __va! */
++	/* FIXME: Set the SCI bits we want to wake up on here */
++
++	/* FIXME:  Set any other SCI events that we might want here */
++
++	outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS);
++
++	wackup_source = NULL;
++
++	/* If we are in test mode, then just return (simulate a successful
++	   suspend/resume).  Otherwise, if we are doing the real thing,
++	   then go for the gusto */
++
++ 	if (olpc_pm_mode != PM_MODE_TEST) {
++		__asm__ __volatile__("movl %0,%%eax" : : "r" (pgd_addr));
++		__asm__("call *(%%edi); cld"
++			: : "D" (&ofw_bios_entry));
++		__asm__ __volatile__("movb $0x34, %al\n\t"
++				     "outb %al, $0x70\n\t"
++				     "movb $0x30, %al\n\t"
++				     "outb %al, $0x71\n\t");
++
++	}
++	else if (test_timeout > 0) {
++	  int t;
++
++	  /* Delay N seconds for testing purposes */
++
++	  for(t = 0; t < test_timeout; t++)
++	    mdelay(1000);
++	}
++
++	return 0;
++}
++
++static void olpc_power_off(void)
++{
++	printk(KERN_INFO "OLPC power off sequence...\n");
++
++	/* Enable all of these controls with 0 delay */
++	outl(0x40000000, pms_base + PM_SCLK);
++	outl(0x40000000, pms_base + PM_IN_SLPCTL);
++	outl(0x40000000, pms_base + PM_WKXD);
++	outl(0x40000000, pms_base + PM_WKD);
++
++	/* Clear status bits (possibly unnecessary) */
++	outl(0x0002ffff, pms_base  + PM_SSC);
++	outl(0xffffffff, acpi_base + PM_GPE0_STS);
++
++	/* Write SLP_EN bit to start the machinery */
++	outl(0x00002000, acpi_base + PM1_CNT);
++}
++
++/* This code will slowly disappear as we fixup the issues in the BIOS */
++
++static void __init olpc_fixup_bios(void)
++{
++	unsigned long hi, lo;
++
++	if (olpc_has_vsa()) {
++		/* The VSA aggressively sets up the ACPI and PM register for
++		 * trapping - its not enough to force these values in the BIOS -
++		 * they seem to be changed during PCI init as well.
++		 */
++
++		/* Change the PM registers to decode to the DD */
++
++		rdmsr(0x510100e2, lo, hi);
++		hi |= 0x80000000;
++		wrmsr(0x510100e2, lo, hi);
++
++		/* Change the ACPI registers to decode to the DD */
++
++		rdmsr(0x510100e3, lo, hi);
++		hi |= 0x80000000;
++		wrmsr(0x510100e3, lo, hi);
++	}
++
++	/* GPIO24 controls WORK_AUX */
++
++	geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_ENABLE);
++	geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_AUX1);
++
++	if (olpc_board_at_least(olpc_board(0xb2))) {
++		/* GPIO10 is connected to the thermal alarm */
++		geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_ENABLE);
++		geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_AUX1);
++
++		/* Set up to get LID events */
++		geode_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_ENABLE);
++
++		/* Clear edge detection and event enable for now */
++		geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++		geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
++		geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
++
++		geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
++		geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
++
++		/* Set the LID to cause an PME event on group 6 */
++		geode_gpio_event_pme(OLPC_GPIO_LID, 6);
++
++		/* Set PME group 6 to fire the SCI interrupt */
++		geode_gpio_set_irq(6, sci_irq);
++	}
++
++	geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_INPUT_ENABLE);
++
++	/* Clear pending events */
++
++	geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
++	geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS);
++
++	//geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_EN);
++	geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE);
++
++	/* Set the SCI to cause a PME event on group 7 */
++	geode_gpio_event_pme(OLPC_GPIO_ECSCI, 7);
++
++	/* And have group 6 also fire the SCI interrupt */
++	geode_gpio_set_irq(7, sci_irq);
++}
++
++/* This provides a control file for setting up testing of the
++   power management system.  For now, there is just one setting:
++   "test" which means that we don't actually enter the power
++   off routine.
++*/
++
++static const char * const pm_states[] = {
++	[PM_MODE_NORMAL]  = "normal",
++	[PM_MODE_TEST]    = "test",
++};
++
++extern struct mutex pm_mutex;
++extern struct kset power_subsys;
++
++static ssize_t control_show(struct kset *s, char *buf)
++{
++	return sprintf(buf, "%s\n", pm_states[olpc_pm_mode]);
++}
++
++static ssize_t control_store(struct kset *s, const char *buf, size_t n)
++{
++	int i, len;
++	char *p;
++
++	p = memchr(buf, '\n', n);
++	len = p ? p - buf : n;
++
++	/* Grab the mutex */
++	mutex_lock(&pm_mutex);
++	
++	for(i = 0; i < PM_MODE_MAX; i++) {
++		if (!strncmp(buf, pm_states[i], len)) {
++			olpc_pm_mode = i;
++			break;
++		}
++	}
++
++	mutex_unlock(&pm_mutex);
++
++	return (i == PM_MODE_MAX) ? -EINVAL : n;
++}
++       
++static ssize_t timeout_show(struct kset *s, char *buf) 
++{
++	return sprintf(buf, "%d\n", test_timeout);
++}
++
++static ssize_t timeout_store(struct kset *s, const char *buf, size_t n)
++{
++	unsigned int t = simple_strtoul(buf, NULL, 0);
++	test_timeout = t;
++
++	return n;
++}
++
++static ssize_t wackup_show(struct kset *s, char *buf)
++{
++	return sprintf(buf, "%s\n", wackup_source ? wackup_source : "none");
++}
++
++static struct subsys_attribute control_attr = {
++	.attr = {
++		.name = "olpc-pm",
++		.mode = 0644,
++	},
++	.show = control_show,
++	.store = control_store,
++};
++
++static struct subsys_attribute test_attr = {
++	.attr = {
++		.name = "test-timeout",
++		.mode = 0644,
++	},
++	.show = timeout_show,
++	.store = timeout_store,
++};
++
++static struct subsys_attribute wackup_attr = {
++	.attr = {
++		.name = "wakeup-source",
++		.mode = 0400,
++	},
++	.show = wackup_show,
++};
++
++static struct attribute * olpc_attributes[] = {
++	&control_attr.attr,
++	&test_attr.attr,
++	&wackup_attr.attr,
++	NULL
++};
++
++static struct attribute_group olpc_attrs = {
++	.attrs = olpc_attributes,
++};
++
++static int __init alloc_inputdevs(void)
++{
++	int ret = -ENOMEM;
++
++	pm_inputdev = input_allocate_device();
++	if (!pm_inputdev)
++		goto err;
++
++	pm_inputdev->name = "OLPC PM";
++	pm_inputdev->phys = "olpc_pm/input0";
++	set_bit(EV_KEY, pm_inputdev->evbit);
++	set_bit(KEY_POWER, pm_inputdev->keybit);
++
++	ret = input_register_device(pm_inputdev);
++	if (ret) {
++		printk(KERN_ERR "olpc-pm:  failed to register PM input device: %d\n", ret);
++		goto err;
++	}
++
++	lid_inputdev = input_allocate_device();
++	if (!lid_inputdev)
++		goto err;
++
++	lid_inputdev->name = "OLPC lid switch";
++	lid_inputdev->phys = "olpc_pm/input1";
++	set_bit(EV_SW, lid_inputdev->evbit);
++	set_bit(SW_LID, lid_inputdev->swbit);
++
++	ret = input_register_device(lid_inputdev);
++	if (ret) {
++		printk(KERN_ERR "olpc-pm:  failed to register lid input device: %d\n", ret);
++		goto err;
++	}
++
++	ebook_inputdev = input_allocate_device();
++	if (!ebook_inputdev)
++		goto err;
++
++	ebook_inputdev->name = "OLPC ebook switch";
++	ebook_inputdev->phys = "olpc_pm/input2";
++	set_bit(EV_SW, ebook_inputdev->evbit);
++	set_bit(SW_TABLET_MODE, ebook_inputdev->swbit);
++
++	ret = input_register_device(ebook_inputdev);
++	if (ret) {
++		printk(KERN_ERR "olpc-pm:  failed to register ebook input device: %d\n", ret);
++		goto err;
++	}
++
++	return ret;
++err:
++	if (ebook_inputdev) {
++		input_unregister_device(ebook_inputdev);
++		ebook_inputdev = NULL;
++	}
++	if (lid_inputdev) {
++		input_unregister_device(lid_inputdev);
++		lid_inputdev = NULL;
++	}
++	if (pm_inputdev) {
++		input_unregister_device(pm_inputdev);
++		pm_inputdev = NULL;
++	}
++
++	return ret;
++}
++
++static int __init olpc_pm_init(void)
++{
++	uint32_t lo, hi;
++	int ret;
++
++	if (!machine_is_olpc())
++		return -ENODEV;
++
++	acpi_base = geode_acpi_base();
++	pms_base = geode_pms_base();
++
++	if (!acpi_base || !pms_base)
++	  return -ENODEV;
++
++	pm_power_off = olpc_power_off;
++
++	ret = alloc_inputdevs();
++	if (ret)
++		return ret;
++
++	rdmsr(0x51400020, lo, hi);
++	sci_irq = (lo >> 20) & 15;
++
++	if (sci_irq) {
++		printk(KERN_INFO "SCI is mapped to IRQ %d\n", sci_irq);
++	} else {
++		/* Zero doesn't mean zero -- it means masked */
++		printk(KERN_INFO "SCI unmapped. Mapping to IRQ 3\n");
++		sci_irq = 3;
++		lo |= 0x00300000;
++		wrmsrl(0x51400020, lo);
++	}
++
++	olpc_fixup_bios();
++
++	lo = inl(pms_base + PM_FSD);
++
++	/* Lock, enable failsafe, 4 seconds */
++	outl(0xc001f400, pms_base + PM_FSD);
++
++	/* Here we set up the SCI events we're interested in during
++	 * real-time.  We have no sleep button, and the RTC doesn't make
++	 * sense, so set up the power button
++	 */
++
++	outl(inl(acpi_base) | ((CS5536_PM_PWRBTN) << 16), acpi_base);
++
++	if (olpc_board_at_least(olpc_board(0xb2))) {
++		gpio_wake_events |= GPIO_WAKEUP_LID;
++
++		/* Get the current value of the GPIO, and set up the edges */
++		olpc_lid_flag = geode_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK);
++
++		/* Watch for the opposite edge */
++
++		if (olpc_lid_flag)
++			geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
++		else
++			geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
++
++		/* Enable the event */
++		geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++	}
++
++	/* Set up the EC SCI */
++
++	gpio_wake_events |= GPIO_WAKEUP_EC;
++
++	outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
++	outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
++
++	/* Select level triggered in PIC */
++
++	if (sci_irq < 8) {
++		lo = inb(0x4d0);
++		lo |= 1 << sci_irq;
++		outb(lo, 0x4d0);
++	} else {
++		lo = inb(0x4d1);
++		lo |= 1 << (sci_irq - 8);
++		outb(lo, 0x4d1);
++	}
++	/* Clear pending interrupt */
++	outl(inl(acpi_base) | 0xFFFF, acpi_base);
++	process_sci_queue(0);	/* we just want to flush the queue here */
++	init_ebook_state();
++
++	/* Enable the interrupt */
++
++	ret = request_irq(sci_irq, &olpc_pm_interrupt, 0, "SCI", &acpi_base);
++
++	if (ret) {
++		printk(KERN_ERR "Error registering SCI: %d\n", ret);
++		return ret;
++	}
++
++	ofw_bios_entry.address = 0xF0000 + PAGE_OFFSET;
++	suspend_set_ops(&olpc_pm_ops);
++
++	sysfs_create_group(&power_subsys.kobj, &olpc_attrs);
++
++	return 0;
++}
++
++
++#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE)
++struct resource rtc_platform_resource[2] = {
++	{
++		.flags		= IORESOURCE_IO,
++		.start		= RTC_PORT(0),
++		.end		= RTC_PORT(0) + RTC_IO_EXTENT
++	},
++	{
++		.flags = IORESOURCE_IRQ,
++		.start = 8,
++		.end = 8,
++	},
++};
++
++
++static void rtc_wake_on(struct device *dev)
++{
++	olpc_wakeup_mask |= CS5536_PM_RTC;
++}
++
++static void rtc_wake_off(struct device *dev)
++{
++	olpc_wakeup_mask &= ~(CS5536_PM_RTC);
++}
++
++static struct cmos_rtc_board_info rtc_info = {
++	.rtc_day_alarm = 0,
++	.rtc_mon_alarm = 0,
++	.rtc_century = 0,
++	.wake_on = rtc_wake_on,
++	.wake_off = rtc_wake_off,
++};
++
++struct platform_device olpc_rtc_device = {
++	.name = "rtc_cmos",
++	.id = -1,
++	.num_resources = ARRAY_SIZE(rtc_platform_resource),
++	.dev.platform_data = &rtc_info,
++	.resource = rtc_platform_resource,
++};
++
++static int __init olpc_platform_init(void)
++{
++	rdmsrl(MSR_RTC_DOMA_OFFSET, rtc_info.rtc_day_alarm);
++	rdmsrl(MSR_RTC_MONA_OFFSET, rtc_info.rtc_mon_alarm);
++	rdmsrl(MSR_RTC_CEN_OFFSET, rtc_info.rtc_century);
++
++	(void)platform_device_register(&olpc_rtc_device);
++	device_init_wakeup(&olpc_rtc_device.dev, 1);
++
++	(void)platform_device_register(&olpc_powerbutton_dev);
++	device_init_wakeup(&olpc_powerbutton_dev.dev, 1);
++
++	(void)platform_device_register(&olpc_lid_dev);
++	device_init_wakeup(&olpc_lid_dev.dev, 1);
++
++	return 0;
++}
++arch_initcall(olpc_platform_init);
++#endif /* CONFIG_RTC_DRV_CMOS */
++
++static void olpc_pm_exit(void)
++{
++	/* Clear any pending events, and disable them */
++	outl(0xFFFF, acpi_base+2);
++
++	free_irq(sci_irq, &acpi_base);
++	input_unregister_device(pm_inputdev);
++	input_unregister_device(lid_inputdev);
++	input_unregister_device(ebook_inputdev);
++}
++
++static struct platform_suspend_ops olpc_pm_ops = {
++        .valid = olpc_pm_state_valid,
++        .enter = olpc_pm_enter,
++};
++
++module_init(olpc_pm_init);
++module_exit(olpc_pm_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
++MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1");
+diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-sleep.S linux_2.6.24_olpc/arch/x86/kernel/olpc-sleep.S
+--- linux_2.6.24_org/arch/x86/kernel/olpc-sleep.S	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/olpc-sleep.S	2008-02-15 18:59:26.000000000 +0000
+@@ -0,0 +1,39 @@
++.text
++
++ENTRY(olpc_sleep_asm)
++olpc_sleep:
++	;; Get the value of PM1_CNT and store it off
++	
++	add 08h, ax
++	mov bx,dx
++	in dx,eax
++	or 2000h, ax
++	mov ax,di
++	
++	;; flush the cache
++	wbinvd
++
++	;; GX2 must disable refresh before going into self-refresh 
++	mov 2000000180xh, ecx
++	rdmsr
++	mov eax, esi
++	and 0FF0000FFh, eax
++	wrmsr
++
++	;; Now, put  the memory into self refresh
++	mov 2004, cx
++	xor edx, edx
++	xor eax, eax
++	mov 04h, al
++	wrmsr
++
++	;; Thats all she wrote - time to go to sleep
++	
++	mov bx, dx
++	movzx di, eax
++	out eax, dx
++
++	;;  
++	
++	
++	
+diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-wakeup.S linux_2.6.24_olpc/arch/x86/kernel/olpc-wakeup.S
+--- linux_2.6.24_org/arch/x86/kernel/olpc-wakeup.S	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/olpc-wakeup.S	2008-02-15 18:59:25.000000000 +0000
+@@ -0,0 +1,133 @@
++.text
++#include <linux/linkage.h>
++#include <asm/segment.h>
++#include <asm/page.h>
++
++	.macro writepost,value
++		movb $0x34, %al
++		outb %al, $0x70
++		movb $\value, %al
++		outb %al, $0x71
++	.endm
++	
++ALIGN
++	.align 4096
++
++wakeup_start:
++#	jmp wakeup_start
++
++	cli
++	cld
++
++	# Clear any dangerous flags
++	
++	pushl $0
++	popfl
++		
++	writepost 0x31
++
++	# Set up %cr3
++	movl $swsusp_pg_dir - __PAGE_OFFSET, %eax
++	movl %eax, %cr3
++
++	movl saved_cr4, %eax
++	movl %eax, %cr4
++	
++	movl saved_cr0, %eax
++	movl %eax, %cr0
++	
++	jmp 1f
++1:	
++	ljmpl $__KERNEL_CS,$wakeup_return
++	
++
++.org 0x1000
++
++wakeup_return:
++	movw    $__KERNEL_DS, %ax
++	movw    %ax, %ss
++	movw    %ax, %ds
++	movw    %ax, %es
++	movw    %ax, %fs
++	movw    %ax, %gs
++	
++	lgdt    saved_gdt
++	lidt    saved_idt
++	lldt    saved_ldt
++	ljmp    $(__KERNEL_CS),$1f
++1:
++	movl    %cr3, %eax
++	movl    %eax, %cr3
++	wbinvd
++
++	# Go back to the return point
++	jmp ret_point
++	
++save_registers:
++	sgdt  saved_gdt
++	sidt  saved_idt
++	sldt  saved_ldt
++
++	pushl %edx
++	movl %cr4, %edx
++	movl %edx, saved_cr4
++
++	movl %cr0, %edx
++	movl %edx, saved_cr0
++
++	popl %edx
++		
++	
++        movl %ebx, saved_context_ebx
++        movl %ebp, saved_context_ebp
++        movl %esi, saved_context_esi
++        movl %edi, saved_context_edi
++
++	pushfl
++	popl saved_context_eflags
++	
++        ret
++
++
++restore_registers:
++        movl saved_context_ebp, %ebp
++        movl saved_context_ebx, %ebx
++        movl saved_context_esi, %esi
++        movl saved_context_edi, %edi
++
++	pushl saved_context_eflags
++	popfl
++	
++        ret
++
++	
++ENTRY(do_olpc_suspend_lowlevel)
++	call	save_processor_state
++	call	save_registers
++
++	# This is the stack context we want to remember
++	movl %esp, saved_context_esp
++
++	pushl	$3
++	call	olpc_do_sleep
++	
++	jmp	wakeup_start
++	.p2align 4,,7
++ret_point:
++	movl    saved_context_esp, %esp
++
++	writepost 0x32
++
++	call	restore_registers
++	call	restore_processor_state
++	ret
++
++.data
++ALIGN
++
++saved_gdt:     .long   0,0
++saved_idt:     .long   0,0
++saved_ldt:     .long   0
++saved_cr4:     .long   0
++saved_cr0:     .long   0
++
+diff -purN linux_2.6.24_org/arch/x86/kernel/prom.c linux_2.6.24_olpc/arch/x86/kernel/prom.c
+--- linux_2.6.24_org/arch/x86/kernel/prom.c	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/prom.c	2008-02-15 18:59:26.000000000 +0000
+@@ -0,0 +1,478 @@
++/*
++ * Procedures for creating, accessing and interpreting the device tree.
++ *
++ * Paul Mackerras	August 1996.
++ * Copyright (C) 1996-2005 Paul Mackerras.
++ * 
++ *  Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
++ *    {engebret|bergner}@us.ibm.com 
++ *
++ *  Adapted for sparc64 by David S. Miller davem@davemloft.net
++ *
++ *  Adapter for i386/OLPC by Andres Salomon <dilinger@debian.org>
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/bootmem.h>
++#include <linux/module.h>
++#include <asm/prom.h>
++#include <asm/ofw.h>
++
++/*
++ * XXX: This is very much a stub; right now we're keeping 2 device trees
++ * in memory (one for promfs, and one here).  That will not remain
++ * for long!
++ */
++
++static struct device_node *allnodes;
++
++/* use when traversing tree through the allnext, child, sibling,
++ * or parent members of struct device_node.
++ */
++static DEFINE_RWLOCK(devtree_lock);
++
++int of_device_is_compatible(const struct device_node *device,
++			    const char *compat)
++{
++	const char* cp;
++	int cplen, l;
++
++	cp = of_get_property(device, "compatible", &cplen);
++	if (cp == NULL)
++		return 0;
++	while (cplen > 0) {
++		if (strncmp(cp, compat, strlen(compat)) == 0)
++			return 1;
++		l = strlen(cp) + 1;
++		cp += l;
++		cplen -= l;
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(of_device_is_compatible);
++
++struct device_node *of_get_parent(const struct device_node *node)
++{
++	struct device_node *np;
++
++	if (!node)
++		return NULL;
++
++	np = node->parent;
++
++	return np;
++}
++EXPORT_SYMBOL(of_get_parent);
++
++struct device_node *of_get_next_child(const struct device_node *node,
++	struct device_node *prev)
++{
++	struct device_node *next;
++
++	next = prev ? prev->sibling : node->child;
++	for (; next != 0; next = next->sibling) {
++		break;
++	}
++
++	return next;
++}
++EXPORT_SYMBOL(of_get_next_child);
++
++struct device_node *of_find_node_by_path(const char *path)
++{
++	struct device_node *np = allnodes;
++
++	for (; np != 0; np = np->allnext) {
++		if (np->full_name != 0 && strcmp(np->full_name, path) == 0)
++			break;
++	}
++
++	return np;
++}
++EXPORT_SYMBOL(of_find_node_by_path);
++
++struct device_node *of_find_node_by_phandle(phandle handle)
++{
++	struct device_node *np;
++
++	for (np = allnodes; np != 0; np = np->allnext)
++		if (np->node == handle)
++			break;
++
++	return np;
++}
++EXPORT_SYMBOL(of_find_node_by_phandle);
++
++struct device_node *of_find_node_by_name(struct device_node *from,
++	const char *name)
++{
++	struct device_node *np;
++
++	np = from ? from->allnext : allnodes;
++	for (; np != NULL; np = np->allnext)
++		if (np->name != NULL && strcmp(np->name, name) == 0)
++			break;
++
++	return np;
++}
++EXPORT_SYMBOL(of_find_node_by_name);
++
++struct device_node *of_find_node_by_type(struct device_node *from,
++	const char *type)
++{
++	struct device_node *np;
++
++	np = from ? from->allnext : allnodes;
++	for (; np != 0; np = np->allnext)
++		if (np->type != 0 && strcmp(np->type, type) == 0)
++			break;
++
++	return np;
++}
++EXPORT_SYMBOL(of_find_node_by_type);
++
++struct device_node *of_find_compatible_node(struct device_node *from,
++	const char *type, const char *compatible)
++{
++	struct device_node *np;
++
++	np = from ? from->allnext : allnodes;
++	for (; np != 0; np = np->allnext) {
++		if (type != NULL
++		    && !(np->type != 0 && strcmp(np->type, type) == 0))
++			continue;
++		if (of_device_is_compatible(np, compatible))
++			break;
++	}
++
++	return np;
++}
++EXPORT_SYMBOL(of_find_compatible_node);
++
++struct property *of_find_property(const struct device_node *np,
++				  const char *name,
++				  int *lenp)
++{
++	struct property *pp;
++
++	for (pp = np->properties; pp != 0; pp = pp->next) {
++		if (strcasecmp(pp->name, name) == 0) {
++			if (lenp != 0)
++				*lenp = pp->length;
++			break;
++		}
++	}
++	return pp;
++}
++EXPORT_SYMBOL(of_find_property);
++
++/*
++ * Find a property with a given name for a given node
++ * and return the value.
++ */
++const void *of_get_property(const struct device_node *np, const char *name,
++		      int *lenp)
++{
++	struct property *pp = of_find_property(np,name,lenp);
++	return pp ? pp->value : NULL;
++}
++EXPORT_SYMBOL(of_get_property);
++
++int of_getintprop_default(struct device_node *np, const char *name, int def)
++{
++	struct property *prop;
++	int len;
++
++	prop = of_find_property(np, name, &len);
++	if (!prop || len != 4)
++		return def;
++
++	return *(int *) prop->value;
++}
++EXPORT_SYMBOL(of_getintprop_default);
++
++int of_n_addr_cells(struct device_node *np)
++{
++	const int* ip;
++	do {
++		if (np->parent)
++			np = np->parent;
++		ip = of_get_property(np, "#address-cells", NULL);
++		if (ip != NULL)
++			return *ip;
++	} while (np->parent);
++	/* No #address-cells property for the root node, default to 2 */
++	return 2;
++}
++EXPORT_SYMBOL(of_n_addr_cells);
++
++int of_n_size_cells(struct device_node *np)
++{
++	const int* ip;
++	do {
++		if (np->parent)
++			np = np->parent;
++		ip = of_get_property(np, "#size-cells", NULL);
++		if (ip != NULL)
++			return *ip;
++	} while (np->parent);
++	/* No #size-cells property for the root node, default to 1 */
++	return 1;
++}
++EXPORT_SYMBOL(of_n_size_cells);
++
++int of_set_property(struct device_node *dp, const char *name, void *val, int len)
++{
++	return -EIO;
++}
++EXPORT_SYMBOL(of_set_property);
++
++static unsigned int prom_early_allocated;
++
++static void * __init prom_early_alloc(unsigned long size)
++{
++	void *ret;
++
++	ret = kmalloc(size, GFP_KERNEL);
++	if (ret != NULL)
++		memset(ret, 0, size);
++	else
++		printk(KERN_ERR "ACK!  couldn't allocate prom memory!\n");
++
++	prom_early_allocated += size;
++
++	return ret;
++}
++
++static int is_root_node(const struct device_node *dp)
++{
++	if (!dp)
++		return 0;
++
++	return (dp->parent == NULL);
++}
++
++static char * __init build_path_component(struct device_node *dp)
++{
++	int pathlen;
++	char *n, *i;
++
++	if (ofw("package-to-path", 3, 1, dp->node, NULL, 0, &pathlen)) {
++		printk(KERN_ERR "PROM: unable to get path name from OFW!\n");
++		return "ERROR";
++	}
++	n = prom_early_alloc(pathlen + 1);
++	if (ofw("package-to-path", 3, 1, dp->node, n, pathlen+1, &pathlen))
++		printk(KERN_ERR "PROM: unable to get path name from OFW\n");
++
++	if ((i = strrchr(n, '/')))
++		n = ++i;	/* we only want the file name */
++	return n;
++}
++
++static char * __init build_full_name(struct device_node *dp)
++{
++	int len, ourlen, plen;
++	char *n;
++
++	plen = strlen(dp->parent->full_name);
++	ourlen = strlen(dp->path_component_name);
++	len = ourlen + plen + 2;
++
++	n = prom_early_alloc(len);
++	strcpy(n, dp->parent->full_name);
++	if (!is_root_node(dp->parent)) {
++		strcpy(n + plen, "/");
++		plen++;
++	}
++	strcpy(n + plen, dp->path_component_name);
++
++	return n;
++}
++
++static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len)
++{
++	static struct property *tmp = NULL;
++	struct property *p;
++
++	if (tmp) {
++		p = tmp;
++		memset(p, 0, sizeof(*p) + 32);
++		tmp = NULL;
++	} else {
++		p = prom_early_alloc(sizeof(struct property) + 32);
++	}
++
++	p->name = (char *) (p + 1);
++	if (special_name) {
++		strcpy(p->name, special_name);
++		p->length = special_len;
++		p->value = prom_early_alloc(special_len);
++		memcpy(p->value, special_val, special_len);
++	} else {
++		int fl;
++		if (prev == NULL) {
++			if (ofw("nextprop", 3, 1, node, "", p->name, &fl)) {
++				printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
++				return NULL;
++			}
++		} else {
++			if (ofw("nextprop", 3, 1, node, prev, p->name, &fl)) {
++				printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
++				return NULL;
++			}
++		}
++		if (strlen(p->name) == 0 || fl != 1) {
++			tmp = p;
++			return NULL;
++		}
++		if (ofw("getproplen", 2, 1, node, p->name, &p->length)) {
++			printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
++			return NULL;
++		}
++		if (p->length <= 0) {
++			p->length = 0;
++		} else {
++			p->value = prom_early_alloc(p->length + 1);
++			if (ofw("getprop", 4, 1, node, p->name, p->value, p->length, &p->length)) {
++				printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
++				return NULL;
++			}
++			((unsigned char *)p->value)[p->length] = '\0';
++		}
++	}
++	return p;
++}
++
++static struct property * __init build_prop_list(phandle node)
++{
++	struct property *head, *tail;
++
++	head = tail = build_one_prop(node, NULL,
++				     ".node", &node, sizeof(node));
++
++	tail->next = build_one_prop(node, NULL, NULL, NULL, 0);
++	tail = tail->next;
++	while(tail) {
++		tail->next = build_one_prop(node, tail->name,
++					    NULL, NULL, 0);
++		tail = tail->next;
++	}
++
++	return head;
++}
++
++static char * __init get_one_property(phandle node, const char *name)
++{
++	char *buf = "<NULL>";
++	int len;
++
++	if (ofw("getproplen", 2, 1, node, name, &len)) {
++		printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
++		return NULL;
++	}
++	if (len > 0) {
++		buf = prom_early_alloc(len);
++		if (ofw("getprop", 4, 1, node, name, buf, len, &len)) {
++			printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
++			return NULL;
++		}
++	}
++
++	return buf;
++}
++
++static struct device_node * __init create_node(phandle node, struct device_node *parent)
++{
++	struct device_node *dp;
++
++	if (!node)
++		return NULL;
++
++	dp = prom_early_alloc(sizeof(*dp));
++	dp->parent = parent;
++
++	kref_init(&dp->kref);
++
++	dp->name = get_one_property(node, "name");
++	dp->type = get_one_property(node, "device_type");
++	dp->node = node;
++
++	dp->properties = build_prop_list(node);
++
++	return dp;
++}
++
++static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp)
++{
++	struct device_node *ret = NULL, *prev_sibling = NULL;
++	struct device_node *dp;
++	u32 child;
++
++	while (1) {
++		dp = create_node(node, parent);
++		if (!dp)
++			break;
++
++		if (prev_sibling)
++			prev_sibling->sibling = dp;
++
++		if (!ret)
++			ret = dp;
++		prev_sibling = dp;
++
++		*(*nextp) = dp;
++		*nextp = &dp->allnext;
++
++		dp->path_component_name = build_path_component(dp);
++		dp->full_name = build_full_name(dp);
++
++		if (ofw("child", 1, 1, node, &child)) {
++			printk(KERN_ERR "PROM: %s: fetching child failed!\n", __func__);
++			return NULL;
++		}
++		dp->child = build_tree(dp, child, nextp);
++
++		if (ofw("peer", 1, 1, node, &node)) {
++			printk(KERN_ERR "PROM: %s: fetching peer failed!\n", __func__);
++			return NULL;
++		}
++	}
++
++	return ret;
++}
++
++static phandle root_node;
++
++void __init prom_build_devicetree(void)
++{
++	struct device_node **nextp;
++	u32 child;
++
++	if (ofw("peer", 1, 1, 0, &root_node)) {
++		printk(KERN_ERR "PROM: unable to get root node from OFW!\n");
++		return;
++	}
++
++	allnodes = create_node(root_node, NULL);
++	allnodes->path_component_name = "";
++	allnodes->full_name = "/";
++
++	nextp = &allnodes->allnext;
++	if (ofw("child", 1, 1, allnodes->node, &child)) {
++		printk(KERN_ERR "PROM: unable to get child node from OFW!\n");
++		return;
++	}
++	allnodes->child = build_tree(allnodes, child, &nextp);
++	printk("PROM: Built device tree with %u bytes of memory.\n",
++	       prom_early_allocated);
++}
+diff -purN linux_2.6.24_org/arch/x86/pci/olpc.c linux_2.6.24_olpc/arch/x86/pci/olpc.c
+--- linux_2.6.24_org/arch/x86/pci/olpc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/pci/olpc.c	2008-02-15 18:59:22.000000000 +0000
+@@ -0,0 +1,298 @@
++/*
++ * olpcpci.c - Low-level PCI config space access for OLPC systems
++ * without the VSA PCI virtualization software.
++ *
++ * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device)
++ * has some I/O functions (display, southbridge, sound, USB HCIs, etc)
++ * that more or less behave like PCI devices, but the hardware doesn't
++ * directly implement the PCI configuration space headers.  AMD provides
++ * "VSA" (Virtual System Architecture) software that emulates PCI config
++ * space for these devices, by trapping I/O accesses to PCI config register
++ * (CF8/CFC) and running some code in System Management Mode interrupt state.
++ * On the OLPC platform, we don't want to use that VSA code because
++ * (a) it slows down suspend/resume, and (b) recompiling it requires special
++ * compilers that are hard to get.  So instead of letting the complex VSA
++ * code simulate the PCI config registers for the on-chip devices, we
++ * just simulate them the easy way, by inserting the code into the
++ * pci_write_config and pci_read_config path.  Most of the config registers
++ * are read-only anyway, so the bulk of the simulation is just table lookup.
++ */
++
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <asm/olpc.h>
++#include <asm/geode.h>
++#include "pci.h"
++
++static int is_lx;
++
++/*
++ * In the tables below, the first two line (8 longwords) are the
++ * size masks that are used when the higher level PCI code determines
++ * the size of the region by writing ~0 to a base address register
++ * and reading back the result.
++ *
++ * The following lines are the values that are read during normal
++ * PCI config access cycles, i.e. not after just having written
++ * ~0 to a base address register.
++ */
++
++static const u32 lxnb_hdr[] = {  /* dev 1 function 0 - devfn = 8 */
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++
++    0x281022 ,  0x2200005 ,  0x6000021 ,   0x80f808 ,  /* AMD Vendor ID */
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,  /* No virtual registers, hence no BAR for them */
++         0x0 ,        0x0 ,        0x0 ,   0x28100b ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++};
++
++static const u32 gxnb_hdr[] = {  /* dev 1 function 0 - devfn = 8 */
++  0xfffffffd ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++
++    0x28100b ,  0x2200005 ,  0x6000021 ,   0x80f808 ,  /* NSC Vendor ID */
++      0xac1d ,        0x0 ,        0x0 ,        0x0 ,  /* I/O BAR - base of virtual registers */
++         0x0 ,        0x0 ,        0x0 ,   0x28100b ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++};
++
++static const u32 lxfb_hdr[] = {  /* dev 1 function 1 - devfn = 9 */
++  0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++
++  0x20811022 ,  0x2200003 ,  0x3000000 ,        0x0 , /* AMD Vendor ID */
++  0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
++  0xfe00c000 ,        0x0 ,        0x0 ,   0x30100b , /* VIP */
++         0x0 ,        0x0 ,        0x0 ,      0x10e , /* INTA, IRQ14 for graphics accel */
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++       0x3d0 ,      0x3c0 ,    0xa0000 ,        0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++};
++
++static const u32 gxfb_hdr[] = {  /* dev 1 function 1 - devfn = 9 */
++  0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++
++    0x30100b ,  0x2200003 ,  0x3000000 ,        0x0 , /* NSC Vendor ID */
++  0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
++         0x0 ,        0x0 ,        0x0 ,   0x30100b ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++       0x3d0 ,      0x3c0 ,    0xa0000 ,        0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++};
++
++static const u32 aes_hdr[] = {	/* dev 1 function 2 - devfn = 0xa */
++  0xffffc000 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++
++  0x20821022 ,  0x2a00006 , 0x10100000 ,        0x8 , /* NSC Vendor ID */
++  0xfe010000 ,        0x0 ,        0x0 ,        0x0 , /* AES registers */
++         0x0 ,        0x0 ,        0x0 , 0x20821022 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++};
++
++
++static const u32 isa_hdr[] = {  /* dev f function 0 - devfn = 78 */
++  0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 ,
++  0xffffff81 , 0xffffffc1 ,        0x0 ,        0x0 ,
++
++  0x20901022 ,  0x2a00049 ,  0x6010003 ,   0x802000 ,
++      0x18b1 ,     0x1001 ,     0x1801 ,     0x1881 , /* SMB-8   GPIO-256  MFGPT-64  IRQ-32 */
++      0x1401 ,     0x1841 ,        0x0 , 0x20901022 , /* PMS-128 ACPI-64 */
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,     0xaa5b , /* interrupt steering */
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++};
++
++static const u32 ac97_hdr[] = {  /* dev f function 3 - devfn = 7b */
++  0xffffff81 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++
++  0x20931022 ,  0x2a00041 ,  0x4010001 ,        0x0 ,
++      0x1481 ,        0x0 ,        0x0 ,        0x0 , /* I/O BAR-128 */
++         0x0 ,        0x0 ,        0x0 , 0x20931022 ,
++         0x0 ,        0x0 ,        0x0 ,      0x205 , /* IntB , IRQ5 */
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++};
++
++static const u32 ohci_hdr[] = {  /* dev f function 4 - devfn = 7c */
++  0xfffff000 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++
++  0x20941022 ,  0x2300006 ,  0xc031002 ,        0x0 ,
++  0xfe01a000 ,        0x0 ,        0x0 ,        0x0 , /* MEMBAR-1000 */
++         0x0 ,        0x0 ,        0x0 , 0x20941022 ,
++         0x0 ,       0x40 ,        0x0 ,      0x40a , /* CapPtr  INT-D, IRQ A */
++  0xc8020001 ,        0x0 ,        0x0 ,        0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++};
++
++static const u32 ehci_hdr[] = {  /* dev f function 4 - devfn = 7d */
++  0xfffff000 ,        0x0 ,        0x0 ,        0x0 ,
++         0x0 ,        0x0 ,        0x0 ,        0x0 ,
++
++  0x20951022 ,  0x2300006 ,  0xc032002 ,        0x0 ,
++  0xfe01b000 ,        0x0 ,        0x0 ,        0x0 , /* MEMBAR-1000 */
++         0x0 ,        0x0 ,        0x0 , 0x20951022 ,
++         0x0 ,       0x40 ,        0x0 ,      0x40a , /* CapPtr  INT-D, IRQ A */
++  0xc8020001 ,        0x0 ,        0x0 ,        0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
++#if 0
++         0x1 , 0x40080000 ,        0x0 ,        0x0 , /* EECP - see section 2.1.7 of EHCI spec */
++#endif
++  0x01000001 , 0x00000000 ,        0x0 ,        0x0 , /* EECP - see section 2.1.7 of EHCI spec */
++      0x2020 ,        0x0 ,        0x0 ,        0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP  */
++};
++
++static u32 ff_loc    = ~0;
++static u32 zero_loc  =  0;
++
++static int bar_probing = 0;       /* Set after a write of ~0 to a BAR */
++
++#define NB_SLOT 0x1      /* Northbridge - GX chip - Device 1 */
++#define SB_SLOT 0xf      /* Southbridge - CS5536 chip - Device F */
++#define SIMULATED(bus, devfn)  (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT)))
++
++static u32 *hdr_addr(const u32 *hdr, int reg)
++{
++	u32 addr;
++
++	/*
++	 * This is a little bit tricky.  The header maps consist of
++	 * 0x20 bytes of size masks, followed by 0x70 bytes of header data.
++	 * In the normal case, when not probing a BAR's size, we want
++	 * to access the header data, so we add 0x20 to the reg offset,
++	 * thus skipping the size mask area.
++	 * In the BAR probing case, we want to access the size mask for
++	 * the BAR, so we subtract 0x10 (the config header offset for
++	 * BAR0), and don't skip the size mask area.
++	 */
++
++	addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20);
++
++	bar_probing = 0;
++	return (u32 *)addr;
++}
++
++static int pci_olpc_read(unsigned int seg, unsigned int bus,
++		unsigned int devfn, int reg, int len, u32 *value)
++{
++	u32 *addr;
++
++	/* Use the hardware mechanism for non-simulated devices */
++	if (!SIMULATED(bus, devfn))
++		return pci_conf1_read(seg, bus, devfn, reg, len, value);
++
++	/*
++	 * No device has config registers past 0x70, so we save table space
++	 * by not storing entries for the nonexistent registers
++	 */
++	if (reg >= 0x70)
++		addr = &zero_loc;
++	else {
++		switch (devfn) {
++			case  0x8:
++				addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg);
++				break;
++			case  0x9:
++				addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg);
++				break;
++			case  0xa:
++				addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc;
++				break;
++			case 0x78:
++				addr = hdr_addr(isa_hdr, reg);
++				break;
++			case 0x7b:
++				addr = hdr_addr(ac97_hdr, reg);
++				break;
++			case 0x7c:
++				addr = hdr_addr(ohci_hdr, reg);
++				break;
++			case 0x7d:
++				addr = hdr_addr(ehci_hdr, reg);
++				break;
++			default:
++				addr = &ff_loc;
++				break;
++		}
++	}
++	switch (len) {
++		case 1:
++			*value = *(u8 *) addr;
++			break;
++		case 2:
++			*value = *(u16 *) addr;
++			break;
++		case 4:
++			*value = *addr;
++			break;
++		default:
++			BUG();
++	}
++
++	return 0;
++}
++
++static int pci_olpc_write(unsigned int seg, unsigned int bus,
++		unsigned int devfn, int reg, int len, u32 value)
++{
++	/* Use the hardware mechanism for non-simulated devices */
++	if (!SIMULATED(bus, devfn))
++		return pci_conf1_write(seg, bus, devfn, reg, len, value);
++
++	/* XXX we may want to extend this to simulate EHCI power management */
++
++	/*
++	 * Mostly we just discard writes, but if the write is a size probe
++	 * (i.e. writing ~0 to a BAR), we remember it and arrange to return
++	 * the appropriate size mask on the next read.  This is cheating
++	 * to some extent, because it depends on the fact that the next
++	 * access after such a write will always be a read to the same BAR.
++	 */
++
++	if ((reg >= 0x10) && (reg < 0x2c)) {
++		/* Write is to a BAR */
++		if (value == ~0)
++			bar_probing = 1;
++	} else {
++		/*
++		 * No warning on writes to ROM BAR, CMD, LATENCY_TIMER,
++		 * CACHE_LINE_SIZE, or PM registers.
++		 */
++		if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) &&
++		    (reg != 0x0c) && (reg != 0x44))
++			printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value);
++	}
++
++	return 0;
++}
++
++static struct pci_raw_ops pci_olpc_conf = {
++	.read =		pci_olpc_read,
++	.write =	pci_olpc_write,
++};
++
++void __init pci_olpc_init(void)
++{
++	if (!machine_is_olpc() || olpc_has_vsa())
++		return;
++
++	printk(KERN_INFO "PCI: Using configuration type OLPC\n");
++	raw_pci_ops = &pci_olpc_conf;
++	is_lx = is_geode_lx();
++}
+diff -purN linux_2.6.24_org/Documentation/kernel-parameters.txt linux_2.6.24_olpc/Documentation/kernel-parameters.txt
+--- linux_2.6.24_org/Documentation/kernel-parameters.txt	2008-02-15 20:12:29.000000000 +0000
++++ linux_2.6.24_olpc/Documentation/kernel-parameters.txt	2008-02-15 18:59:54.000000000 +0000
+@@ -1244,6 +1244,13 @@ and is between 256 and 4096 characters. 
+ 
+ 	nr_uarts=	[SERIAL] maximum number of UARTs to be registered.
+ 
++	olpc_ec_timeout=	[OLPC] ms delay when issuing EC commands
++			Rather than timing out after 20 ms if an EC
++			command is not properly ACKed, override the length
++			of the timeout.  We have interrupts disabled while
++			waiting for the ACK, so if this is set too high
++			interrupts *may* be lost!
++
+ 	opl3=		[HW,OSS]
+ 			Format: <io>
+ 
+diff -purN linux_2.6.24_org/drivers/base/dd.c linux_2.6.24_olpc/drivers/base/dd.c
+--- linux_2.6.24_org/drivers/base/dd.c	2008-02-15 20:11:29.000000000 +0000
++++ linux_2.6.24_olpc/drivers/base/dd.c	2008-02-15 18:58:46.000000000 +0000
+@@ -293,7 +293,6 @@ static void __device_release_driver(stru
+ 	if (drv) {
+ 		driver_sysfs_remove(dev);
+ 		sysfs_remove_link(&dev->kobj, "driver");
+-		klist_remove(&dev->knode_driver);
+ 
+ 		if (dev->bus)
+ 			blocking_notifier_call_chain(&dev->bus->bus_notifier,
+@@ -306,6 +305,7 @@ static void __device_release_driver(stru
+ 			drv->remove(dev);
+ 		devres_release_all(dev);
+ 		dev->driver = NULL;
++		klist_remove(&dev->knode_driver);
+ 		put_driver(drv);
+ 	}
+ }
+diff -purN linux_2.6.24_org/drivers/char/vt_ioctl.c linux_2.6.24_olpc/drivers/char/vt_ioctl.c
+--- linux_2.6.24_org/drivers/char/vt_ioctl.c	2008-02-15 20:11:48.000000000 +0000
++++ linux_2.6.24_olpc/drivers/char/vt_ioctl.c	2008-02-15 18:59:11.000000000 +0000
+@@ -38,6 +38,9 @@
+ char vt_dont_switch;
+ extern struct tty_driver *console_driver;
+ 
++/* Add a notifier chain to inform drivers of a VT_TEXT/VT_GRAPHICS switch */
++RAW_NOTIFIER_HEAD(console_notifier_list);
++
+ #define VT_IS_IN_USE(i)	(console_driver->ttys[i] && console_driver->ttys[i]->count)
+ #define VT_BUSY(i)	(VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
+ 
+@@ -492,6 +495,14 @@ int vt_ioctl(struct tty_struct *tty, str
+ 		vc->vc_mode = (unsigned char) arg;
+ 		if (console != fg_console)
+ 			return 0;
++
++		/* Notify listeners if the current fg_console has switched */
++
++		raw_notifier_call_chain(&console_notifier_list,
++			(arg == KD_TEXT) ?
++			CONSOLE_EVENT_SWITCH_TEXT :
++			CONSOLE_EVENT_SWITCH_GRAPHICS, 0);
++
+ 		/*
+ 		 * explicitly blank/unblank the screen if switching modes
+ 		 */
+diff -purN linux_2.6.24_org/drivers/i2c/busses/scx200_acb.c linux_2.6.24_olpc/drivers/i2c/busses/scx200_acb.c
+--- linux_2.6.24_org/drivers/i2c/busses/scx200_acb.c	2008-02-15 20:11:33.000000000 +0000
++++ linux_2.6.24_olpc/drivers/i2c/busses/scx200_acb.c	2008-02-15 18:58:49.000000000 +0000
+@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820, 
+ module_param_array(base, int, NULL, 0);
+ MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
+ 
++static unsigned int smbclk = 0x70;
++module_param(smbclk, uint, 0);
++MODULE_PARM_DESC(smbclk, "Specify the SMB_CLK value");
++
+ #define POLL_TIMEOUT	(HZ/5)
+ 
+ enum scx200_acb_state {
+@@ -108,6 +112,7 @@ struct scx200_acb_iface {
+ #define ACBADDR		(iface->base + 4)
+ #define ACBCTL2		(iface->base + 5)
+ #define    ACBCTL2_ENABLE	0x01
++#define ACBCTL3        (iface->base + 6)
+ 
+ /************************************************************************/
+ 
+@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struc
+ {
+ 	u8 val;
+ 
+-	/* Disable the ACCESS.bus device and Configure the SCL
+-	   frequency: 16 clock cycles */
+-	outb(0x70, ACBCTL2);
++	/* Disable the ACCESS.bus device and Configure the SCL */
++
++	outb((smbclk & 0x7F) << 1, ACBCTL2);
++
++	outb((smbclk >> 7) & 0xFF, ACBCTL3);
+ 
+-	if (inb(ACBCTL2) != 0x70) {
++	if (inb(ACBCTL2) != ((smbclk & 0x7F) << 1)) {
+ 		pr_debug(NAME ": ACBCTL2 readback failed\n");
+ 		return -ENXIO;
+ 	}
+diff -purN linux_2.6.24_org/drivers/input/keyboard/atkbd.c linux_2.6.24_olpc/drivers/input/keyboard/atkbd.c
+--- linux_2.6.24_org/drivers/input/keyboard/atkbd.c	2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/keyboard/atkbd.c	2008-02-15 18:59:14.000000000 +0000
+@@ -63,12 +63,25 @@ static int atkbd_extra;
+ module_param_named(extra, atkbd_extra, bool, 0);
+ MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
+ 
++#define ATKBD_KEY_UNKNOWN	  0
++#define ATKBD_KEY_NULL		0xFF0000FF
++
++#define ATKBD_SCR_1		0xFF0000FE
++#define ATKBD_SCR_2		0xFF0000FD
++#define ATKBD_SCR_4		0xFF0000FC
++#define ATKBD_SCR_8		0xFF0000FB
++#define ATKBD_SCR_CLICK		0xFF0000FA
++#define ATKBD_SCR_LEFT		0xFF0000F9
++#define ATKBD_SCR_RIGHT		0xFF0000F8
++
++#define ATKBD_SPECIAL		0xFF0000F8
++
+ /*
+  * Scancode to keycode tables. These are just the default setting, and
+  * are loadable via an userland utility.
+  */
+ 
+-static unsigned char atkbd_set2_keycode[512] = {
++static unsigned int atkbd_set2_keycode[512] = {
+ 
+ #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
+ 
+@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[
+ 	 82, 83, 80, 76, 77, 72,  1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
+ 
+ 	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+-	217,100,255,  0, 97,165,  0,  0,156,  0,  0,  0,  0,  0,  0,125,
++
++	217,100,ATKBD_KEY_NULL,  0, 97,165,  0,  0,
++	156,  0,  0,  0,  0,  0,  0,125,
++
+ 	173,114,  0,113,  0,  0,  0,126,128,  0,  0,140,  0,  0,  0,127,
+ 	159,  0,115,  0,164,  0,  0,116,158,  0,172,166,  0,  0,  0,142,
+ 	157,  0,  0,  0,  0,  0,  0,  0,155,  0, 98,  0,  0,163,  0,  0,
+-	226,  0,  0,  0,  0,  0,  0,  0,  0,255, 96,  0,  0,  0,143,  0,
++
++	226,  0,  0,  0,  0,  0,  0,  0,
++	  0,ATKBD_KEY_NULL, 96,  0,  0,  0,143,  0,
++
+ 	  0,  0,  0,  0,  0,  0,  0,  0,  0,107,  0,105,102,  0,  0,112,
+ 	110,111,108,112,106,103,  0,119,  0,118,109,  0, 99,104,119,  0,
+ 
+@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table
+ #define ATKBD_RET_HANGEUL	0xf2
+ #define ATKBD_RET_ERR		0xff
+ 
+-#define ATKBD_KEY_UNKNOWN	  0
+-#define ATKBD_KEY_NULL		255
+-
+-#define ATKBD_SCR_1		254
+-#define ATKBD_SCR_2		253
+-#define ATKBD_SCR_4		252
+-#define ATKBD_SCR_8		251
+-#define ATKBD_SCR_CLICK		250
+-#define ATKBD_SCR_LEFT		249
+-#define ATKBD_SCR_RIGHT		248
+-
+-#define ATKBD_SPECIAL		248
+-
+ #define ATKBD_LED_EVENT_BIT	0
+ #define ATKBD_REP_EVENT_BIT	1
+ 
+@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table
+ #define ATKBD_XL_HANJA		0x20
+ 
+ static struct {
+-	unsigned char keycode;
++	unsigned int keycode;
+ 	unsigned char set2;
+ } atkbd_scroll_keys[] = {
+ 	{ ATKBD_SCR_1,     0xc5 },
+@@ -200,7 +206,7 @@ struct atkbd {
+ 	char phys[32];
+ 
+ 	unsigned short id;
+-	unsigned char keycode[512];
++	unsigned int keycode[512];
+ 	unsigned char set;
+ 	unsigned char translated;
+ 	unsigned char extra;
+@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struc
+ 	unsigned int code = data;
+ 	int scroll = 0, hscroll = 0, click = -1, add_release_event = 0;
+ 	int value;
+-	unsigned char keycode;
++	unsigned int keycode;
+ 
+ #ifdef ATKBD_DEBUG
+ 	printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
+@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(stru
+ 						atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
+ 		}
+ 	} else if (atkbd->set == 3) {
+-		memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
++		for (i = 0; i < ARRAY_SIZE(atkbd_set3_keycode); i++)
++			atkbd->keycode[i] = atkbd_set3_keycode[i];
+ 	} else {
+-		memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
++		for (i = 0; i < ARRAY_SIZE(atkbd_set2_keycode); i++)
++			atkbd->keycode[i] = atkbd_set2_keycode[i];
+ 
+ 		if (atkbd->scroll)
+ 			for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++)
+@@ -930,8 +938,8 @@ static void atkbd_set_device_attrs(struc
+ 	}
+ 
+ 	input_dev->keycode = atkbd->keycode;
+-	input_dev->keycodesize = sizeof(unsigned char);
+-	input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
++	input_dev->keycodesize = sizeof(unsigned int);
++	input_dev->keycodemax = ARRAY_SIZE(atkbd->keycode);
+ 
+ 	for (i = 0; i < 512; i++)
+ 		if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
+@@ -1022,6 +1030,10 @@ static int atkbd_connect(struct serio *s
+ 	return err;
+ }
+ 
++#ifdef CONFIG_OLPC
++#include <asm/olpc.h>
++#endif
++
+ /*
+  * atkbd_reconnect() tries to restore keyboard into a sane state and is
+  * most likely called on resume.
+@@ -1032,6 +1044,12 @@ static int atkbd_reconnect(struct serio 
+ 	struct atkbd *atkbd = serio_get_drvdata(serio);
+ 	struct serio_driver *drv = serio->drv;
+ 
++#ifdef CONFIG_OLPC
++	if (olpc_board_at_least(olpc_board_pre(0xb3)))
++		if (serio->dev.power.power_state.event != PM_EVENT_ON)
++			return 0;
++#endif
++
+ 	if (!atkbd || !drv) {
+ 		printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
+ 		return -1;
+diff -purN linux_2.6.24_org/drivers/input/mouse/Kconfig linux_2.6.24_olpc/drivers/input/mouse/Kconfig
+--- linux_2.6.24_org/drivers/input/mouse/Kconfig	2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/mouse/Kconfig	2008-02-15 18:59:14.000000000 +0000
+@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT
+ 
+ 	  If unsure, say N.
+ 
++config MOUSE_PS2_OLPC
++	bool "OLPC PS/2 mouse protocol extension" if EMBEDDED
++	default n
++	depends on MOUSE_PS2 && OLPC
++	---help---
++	  Say Y here if you have an OLPC PS/2 touchpad connected to
++	  your system.
++
++	  If unsure, say N.
++
+ config MOUSE_SERIAL
+ 	tristate "Serial mouse"
+ 	select SERIO
+diff -purN linux_2.6.24_org/drivers/input/mouse/Makefile linux_2.6.24_olpc/drivers/input/mouse/Makefile
+--- linux_2.6.24_org/drivers/input/mouse/Makefile	2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/mouse/Makefile	2008-02-15 18:59:14.000000000 +0000
+@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP)	+=
+ psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK)	+= lifebook.o
+ psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT)	+= trackpoint.o
+ psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT)	+= touchkit_ps2.o
++psmouse-$(CONFIG_MOUSE_PS2_OLPC)	+= olpc.o
+diff -purN linux_2.6.24_org/drivers/input/mouse/olpc.c linux_2.6.24_olpc/drivers/input/mouse/olpc.c
+--- linux_2.6.24_org/drivers/input/mouse/olpc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/input/mouse/olpc.c	2008-02-15 18:59:14.000000000 +0000
+@@ -0,0 +1,837 @@
++/*
++ * OLPC touchpad PS/2 mouse driver
++ *
++ * Copyright (c) 2006-2008 One Laptop Per Child
++ * Authors:
++ *   Zephaniah E. Hull
++ *   Andres Salomon <dilinger@laptop.org>
++ *
++ * This driver is partly based on the ALPS driver, which is:
++ *
++ * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
++ * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
++ * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
++ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++/*
++ * The touchpad on the OLPC is fairly wide, with the entire area usable
++ * as a tablet (Pen Tablet/PT), and the center 1/3rd also usable as a
++ * touchpad (Glide Sensor/GS).  The spec from ALPS is available from
++ * <http://wiki.laptop.org/go/Touch_Pad/Tablet>.  It refers to this
++ * device as HGPK (Hybrid GS, PT, and Keymatrix).
++ *
++ * Earlier version of the device had simultaneous reporting; however, that
++ * was removed.  Instead, the device now reports packets in one mode, and
++ * tells the driver when a mode switch needs to happen.
++ */
++
++#define DEBUG
++#include <linux/input.h>
++#include <linux/serio.h>
++#include <linux/libps2.h>
++#include <linux/delay.h>
++#include <asm/olpc.h>
++
++#include "psmouse.h"
++#include "olpc.h"
++
++static int tpdebug;
++module_param(tpdebug, int, 0644);
++
++static int ignore_delta = 60;
++module_param(ignore_delta, int, 0644);
++MODULE_PARM_DESC(ignore_delta, "ignore packets that cause an X or Y delta larger than this value.");
++
++/*
++ * With older hardware, a finger-up event is sometimes not sent.  If it's been
++ * more than 50mS since the last packet, we can safely assume that there was
++ * a finger-up event that we never received.
++ */
++static void hgpk_fingerup_hack(struct psmouse *psmouse, struct hgpk_packet *p)
++{
++	struct hgpk_data *priv = psmouse->private;
++	struct timeval now_tv;
++	s64 now_ns;
++
++	if (psmouse->model >= HGPK_MODEL_C)
++		return;
++
++	if (p->gs_down || p->pt_down) {
++		do_gettimeofday(&now_tv);
++		now_ns = timeval_to_ns(&now_tv);
++
++		if (priv->late && now_ns >= priv->late) {
++			struct input_dev *pt = psmouse->dev;
++			struct input_dev *gs = priv->gs;
++
++			input_report_key(pt, BTN_TOUCH, 0);
++			input_report_key(gs, BTN_TOUCH, 0);
++			input_sync(pt);
++			input_sync(gs);
++			hgpk_dbg(psmouse, "Missing finger-up packet detected, "
++					"working around buggy hardware.\n");
++		}
++		priv->late = now_ns + (50 * NSEC_PER_MSEC);
++	} else
++		priv->late = 0;
++}
++
++/*
++ * C and D series touchpads send an extra finger-up packet to ensure we've
++ * seen it.  That's all well and good, but for some uncomprehensible reason
++ * they sometimes also get stuck in a state where they also send an
++ * extra finger-down packet with coordinates of x=0, y=0.  This royally
++ * screws relative positioning; end users see it as the touchpad jumping
++ * around when they first put their finger down.  This works around that.
++ *
++ * *Sigh*. ALPS..
++ */
++static void hgpk_fingerdown_hack(struct psmouse *psmouse, struct hgpk_packet *p)
++{
++	if (psmouse->model < HGPK_MODEL_C)
++		return;
++
++	/* we only care about x=0, y=0 packets */
++	if (p->x != 0 || p->y != 0)
++		return;
++
++	/*
++	 * if we're a gs_down packet but we were not previously down,
++	 * we're going to assume that this is one of those spurious packets
++	 * that needs to be worked around.
++	 */
++	if (p->gs_down && !test_bit(BTN_TOUCH, p->dev->key)) {
++		hgpk_dbg(psmouse, "spurious GS finger-down packet\n");
++		p->gs_down = 0;
++	} else if (p->pt_down && !test_bit(BTN_TOUCH, p->dev->key)) {
++		hgpk_dbg(psmouse, "spurious PT finger-down packet\n");
++		p->pt_down = 0;
++	}
++}
++
++/*
++ * In general, we have lots of calibration problems that manifest
++ * themselves as jumpy mouse pointers.  Miscalibration, capacitance issues
++ * with the hardware, etc; these make the touchpad detect errant packets
++ * at random places all over the place.  Since we don't expect large deltas
++ * to ever actually be useful, we'll large axis changes that go over our
++ * threshold.
++ */
++static void hgpk_big_delta_hack(struct psmouse *psmouse, struct hgpk_packet *p)
++{
++	struct hgpk_data *priv = psmouse->private;
++	struct input_dev *dev = p->dev;
++
++	/* afaik, this happens on all hardware */
++
++	/* ignore finger-up packets */
++	if (!p->pt_down && !p->gs_down)
++		goto done;
++
++	/* ensure that we're not a finger-down packet */
++	if ((p->pt_down && !test_bit(BTN_TOUCH, dev->key)) || 
++			(p->gs_down && !test_bit(BTN_TOUCH, dev->key)))
++		goto done;
++
++	if (abs(dev->abs[ABS_X] - p->x) > ignore_delta ||
++			abs(dev->abs[ABS_Y] - p->y) > ignore_delta) {
++		hgpk_dbg(psmouse, "axis change (%d,%d) => (%d,%d) is over "
++				"delta threshold\n", dev->abs[ABS_X],
++				dev->abs[ABS_Y], p->x, p->y);
++		input_report_key(dev, BTN_TOUCH, 0);
++		input_sync(dev);
++
++
++		/* two in a row is a pretty good indicator of miscalibration */
++		if (priv->axis_errors++) {
++			/* wait 2s for finger removal, and then recalibrate */
++			queue_delayed_work(kpsmoused_wq, &priv->recalib_wq,
++					msecs_to_jiffies(2000));
++			priv->axis_errors = 0;
++		}
++		return;
++	}
++done:
++	priv->axis_errors = 0;	
++}
++
++/*
++ * This is my favorite touchpad hardware bug.  I'm entirely not sure what
++ * triggers it (I've seen it triggered while the laptop was left on overnight,
++ * but my cat could have very well been using it/sleeping on it).  However,
++ * the touchpad will randomly get stuck in a state where it constantly spews
++ * packets without a finger being on it.  A recalibration will fix it, but
++ * without that it will go on for days (auto-recalibration doesn't catch it,
++ * either).  The packets tend to either have the same coordinates, or be
++ * 1px away from each other; ie, (283,139,6) -> (284,139,5) -> (285,139,5) ->
++ * (286,139,6) -> (286,139,6) -> etc.  We have a number of workarounds here..
++ */
++static void hgpk_spewing_hack(struct psmouse *psmouse, struct hgpk_packet *p)
++{
++	struct hgpk_data *priv = psmouse->private;
++	struct input_dev *dev = p->dev;
++	int repeat_axes;
++
++	if (psmouse->model < HGPK_MODEL_C)
++		return;
++
++	/* ignore 0, 0 packets */
++	if (p->x == 0 && p->y == 0)
++		return;
++
++	/* PT packets don't count */
++	if (p->pt_down) {
++		priv->repeat_pkts = 0;
++		return;
++	}
++
++	/* 
++	 * If we see 2s+ worth of packets that have at least 2 axis deltas of
++	 * only 1px, that's a good indication that we're spewing packets.
++	 * We're going to ignore z=15, though; that's pretty indicative of
++	 * an actual finger on the touchpad just staying still.
++	 */
++	if (p->z == 0 || p->z == 15)
++		goto next_hack;
++	repeat_axes = abs(p->x - dev->abs[ABS_X]) < 2 ? 1 : 0;
++	repeat_axes += abs(p->y - dev->abs[ABS_Y]) < 2 ? 1 : 0;
++	repeat_axes += abs(p->z - dev->abs[ABS_PRESSURE]) < 2 ? 1 : 0;
++	if (repeat_axes > 1) {
++		priv->repeat_pkts++;
++		/* we get 1 packet about every 24mS */
++		if (priv->repeat_pkts > 83) {
++			queue_delayed_work(kpsmoused_wq, &priv->recalib_wq, 0);
++			priv->repeat_pkts = 0;
++		}
++	}
++	else
++		priv->repeat_pkts = 0;
++	return;
++
++next_hack:
++	/*
++	 * 10s of y and z not changing is another kind of miscalibration.
++	 */
++	repeat_axes = (p->y == dev->abs[ABS_Y]) ? 1 : 0;
++	repeat_axes += (p->z == dev->abs[ABS_PRESSURE]) ? 1 : 0;
++	if (repeat_axes > 1) {
++		priv->repeat_pkts++;
++		if (priv->repeat_pkts > 416) {
++			queue_delayed_work(kpsmoused_wq, &priv->recalib_wq, 0);
++			priv->repeat_pkts = 0;
++		}
++	}
++	else
++		priv->repeat_pkts = 0;
++}
++
++/*
++ * HGPK Advanced Mode - single-mode format
++ *
++ * byte 0(PT):  1    1    0    0    1    1     1     1
++ * byte 0(GS):  1    1    1    1    1    1     1     1
++ * byte 1:      0   x6   x5   x4   x3   x2    x1    x0
++ * byte 2(PT):  0    0   x9   x8   x7    ? pt-dsw    0
++ * byte 2(GS):  0  x10   x9   x8   x7    ? gs-dsw pt-dsw
++ * byte 3:      0   y9   y8   y7    1    0   swr   swl
++ * byte 4:      0   y6   y5   y4   y3   y2    y1    y0
++ * byte 5:      0   z6   z5   z4   z3   z2    z1    z0
++ *
++ * ?'s are not defined in the protocol spec, may vary between models.
++ *
++ * swr/swl are the left/right buttons.
++ *
++ * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a
++ * pen/finger
++ */
++
++static int hgpk_validate_byte(unsigned char *packet, int pktcnt)
++{
++	BUG_ON(pktcnt < 1);
++
++	if (packet[0] != HGPK_PT && packet[0] != HGPK_GS)
++		return -1;
++
++	/* bytes 2 - 6 should have 0 in the highest bit */
++	if (pktcnt >= 2 && pktcnt <= 6 && (packet[pktcnt - 1] & 0x80))
++		return -1;
++
++	return 0;
++}
++
++static void hgpk_decode_packet(struct psmouse *psmouse, struct hgpk_packet *p)
++{
++	unsigned char *packet = psmouse->packet;
++
++	BUG_ON(psmouse->pktcnt < 6);
++	
++	p->left = packet[3] & 1;
++	p->right = !!(packet[3] & 2);
++	p->x = packet[1] | ((packet[2] & 0x78) << 4);
++	p->y = packet[4] | ((packet[3] & 0x70) << 3);
++	p->z = packet[5];
++
++	if (packet[0] == HGPK_GS) {
++		p->pt_down = !!(packet[2] & 1);
++		p->gs_down = !!(packet[2] & 2);
++		p->dev = ((struct hgpk_data *) psmouse->private)->gs;
++		if (p->pt_down) {
++			/* we miss spurious PT finger-downs if pt_down is set */
++			p->mode_switch = HGPK_PT;
++			p->pt_down = 0;
++		} else {
++			p->mode_switch = 0;
++		}
++	} else if (packet[0] == HGPK_PT) {
++		p->pt_down = !!(packet[2] & 2);
++		p->gs_down = 0;
++		p->dev = psmouse->dev;
++		p->mode_switch = !p->pt_down ? HGPK_GS : 0;
++	}
++
++	if (tpdebug) {
++		hgpk_dbg(psmouse, "l=%d r=%d p=%d g=%d x=%d y=%d z=%d m=%x\n",
++				p->left, p->right, p->pt_down, p->gs_down,
++				p->x, p->y, p->z, p->mode_switch);
++	}
++}
++
++static void hgpk_process_packet_gspt(struct psmouse *psmouse)
++{
++	struct hgpk_data *priv = psmouse->private;
++	struct input_dev *pt = psmouse->dev;
++	struct input_dev *gs = priv->gs;
++	struct hgpk_packet pkt;
++
++	hgpk_decode_packet(psmouse, &pkt);	
++
++	hgpk_fingerup_hack(psmouse, &pkt);
++	hgpk_fingerdown_hack(psmouse, &pkt);
++	hgpk_big_delta_hack(psmouse, &pkt);
++	hgpk_spewing_hack(psmouse, &pkt);
++
++	input_report_key(pt, BTN_LEFT, pkt.left);
++	input_report_key(pt, BTN_RIGHT, pkt.right);
++	input_report_key(pt, BTN_TOUCH, pkt.pt_down);
++
++	input_report_key(gs, BTN_LEFT, pkt.left);
++	input_report_key(gs, BTN_RIGHT, pkt.right);
++	input_report_key(gs, BTN_TOUCH, pkt.gs_down);
++
++	input_report_abs(pkt.dev, ABS_X, pkt.x);
++	input_report_abs(pkt.dev, ABS_Y, pkt.y);
++	input_report_abs(pkt.dev, ABS_PRESSURE, pkt.z);
++
++	input_sync(pt);
++	input_sync(gs);
++
++	if (priv->recalib_window) {
++		if (time_before(jiffies, priv->recalib_window)) {
++			/* 
++			 * ugh, got a packet inside our recalibration
++			 * window, schedule another recalibration.
++			 */
++			hgpk_dbg(psmouse, "packet inside calibration window, "
++					"queueing another recalibration\n");
++			queue_delayed_work(kpsmoused_wq, &priv->recalib_wq,
++					msecs_to_jiffies(1000));
++		}
++		priv->recalib_window = 0;
++	}
++
++	if (psmouse->model != HGPK_MODEL_A) {
++		if (priv->pending_mode && (!pkt.mode_switch  || 
++				priv->current_mode == pkt.mode_switch)) {
++			priv->pending_mode = 0;
++			cancel_delayed_work(&priv->switch_wq);
++		}
++		else if (priv->pending_mode != pkt.mode_switch) {
++			priv->pending_mode = pkt.mode_switch;
++
++			/* allow for spurious mode_switch packets by delaying */
++			queue_delayed_work(kpsmoused_wq, &priv->switch_wq,
++					msecs_to_jiffies(50));
++		}
++	}
++}
++
++static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse)
++{
++	if (hgpk_validate_byte(psmouse->packet, psmouse->pktcnt)) {
++		hgpk_dbg(psmouse, "%s: (%d) %02x %02x %02x %02x %02x %02x\n",
++				__func__, psmouse->pktcnt, psmouse->packet[0],
++				psmouse->packet[1], psmouse->packet[2],
++				psmouse->packet[3], psmouse->packet[4],
++				psmouse->packet[5]);
++		return PSMOUSE_BAD_DATA;
++	}
++
++	if (psmouse->pktcnt == 6) {
++		hgpk_process_packet_gspt(psmouse);
++		return PSMOUSE_FULL_PACKET;
++	}
++
++	return PSMOUSE_GOOD_DATA;
++}
++
++static int hgpk_force_recalibrate(struct psmouse *psmouse)
++{
++	struct ps2dev *ps2dev = &psmouse->ps2dev;
++	struct hgpk_data *priv = psmouse->private;
++	struct input_dev *pt = psmouse->dev;
++	struct input_dev *gs = priv->gs;
++
++	/* C-series touchpads added the recalibrate command */
++	if (psmouse->model < HGPK_MODEL_C)
++		return 0;
++
++	if (ps2_command(ps2dev, NULL, 0xf5) ||
++			ps2_command(ps2dev, NULL, 0xf5) ||
++			ps2_command(ps2dev, NULL, 0xe6) ||
++			ps2_command(ps2dev, NULL, 0xf5))
++		return -1;
++
++	/* send a finger-up event so the cursor doesn't jump around */
++	input_report_key(pt, BTN_TOUCH, 0);
++	input_report_key(gs, BTN_TOUCH, 0);
++	input_sync(pt);
++	input_sync(gs);
++
++	/* according to ALPS, 150mS is required for recalibration */
++	msleep(150);
++
++	/*
++	 * XXX: If a finger is down during this delay, recalibration will
++	 * detect capacitance incorrectly.  This is a hardware bug, and
++	 * we may need to work around that here.
++	 */
++
++	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))
++		return -1;
++
++	/*
++	 * After we recalibrate, we shouldn't get any packets for 2s.  If
++	 * we do, it's likely that someone's finger was on the touchpad.
++	 * If someone's finger *was* on the touchpad, it's probably
++	 * miscalibrated.  So, we should schedule another recalibration
++	 */
++	priv->recalib_window = jiffies +  msecs_to_jiffies(2000);
++
++	return 0;
++}
++
++static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse)
++{
++	struct ps2dev *ps2dev = &psmouse->ps2dev;
++	unsigned char param[3];
++
++ 	/* E7, E7, E7, E9 gets us a 3 byte identifier */
++	if (ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
++			ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
++			ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
++			ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
++		return -EIO;
++
++	hgpk_dbg(psmouse, "ID: %02x %02x %02x", param[0], param[1], param[2]);
++
++	/* HGPK signature: 0x67, 0x00, 0x<model> */
++	if (param[0] != 0x67 || param[1] != 0x00)
++		return -ENODEV;
++	
++	hgpk_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]);
++	return param[2];
++}
++
++/*
++ * Touchpad should be disabled before calling this!
++ */
++static int hgpk_new_mode(struct psmouse *psmouse, int mode)
++{
++	struct ps2dev *ps2dev = &psmouse->ps2dev;
++	struct hgpk_data *priv = psmouse->private;
++
++	/*
++	 * PT mode: F2, F2, F2, E7
++	 * GS mode: F2, F2, F2, E6
++	 */
++	if (ps2_command(ps2dev, NULL, 0xF2) ||
++			ps2_command(ps2dev, NULL, 0xF2) ||
++			ps2_command(ps2dev, NULL, 0xF2))
++		return -EIO;
++
++	if (mode == HGPK_GS) {
++		if (ps2_command(ps2dev, NULL, 0xE6))
++			return -EIO;
++	} else {
++		if (ps2_command(ps2dev, NULL, 0xE7))
++			return -EIO;
++	}
++
++	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))
++		return -EIO;
++
++	/* tell the irq handler to stop ignoring packets */
++	psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
++
++	priv->current_mode = mode;
++	priv->pending_mode = 0;
++	if (tpdebug)
++		hgpk_warn(psmouse, "Switched to mode 0x%x successful.\n", mode);
++
++	return 0;
++}
++
++static int hgpk_advanced_mode(struct psmouse *psmouse)
++{
++	struct ps2dev *ps2dev = &psmouse->ps2dev;
++
++	/* Switch to 'Advanced mode.', four disables in a row. */
++	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
++			ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
++			ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
++			ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
++		return -1;
++	
++	return hgpk_new_mode(psmouse, HGPK_GS);
++}
++
++/*
++ * This kills power to the touchpad; according to ALPS, current consumption
++ * goes down to 50uA after running this.  To turn power back on, we drive
++ * MS-DAT low.
++ */
++static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
++{
++	struct ps2dev *ps2dev = &psmouse->ps2dev;
++	int timeo;
++
++	/* Added on D-series touchpads */
++	if (psmouse->model < HGPK_MODEL_D)
++		return 0;
++
++	if (enable) {
++		psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
++
++		/*
++		 * Sending a byte will drive MS-DAT low; this will wake up
++		 * the controller.  Once we get an ACK back from it, it
++		 * means we can continue with the touchpad re-init.  ALPS
++		 * tells us that 1s should be long enough, so set that as
++		 * the upper bound.
++		 */
++		for (timeo = 20; timeo > 0; timeo--) {
++			if (!ps2_sendbyte(&psmouse->ps2dev,
++					PSMOUSE_CMD_DISABLE, 20))
++				break;
++			msleep(50);
++		}
++
++		psmouse_reset(psmouse);
++
++		if (hgpk_advanced_mode(psmouse)) {
++			hgpk_err(psmouse, "Failed to reinit touchpad!\n");
++			return -1;
++		}
++	} else {
++		hgpk_dbg(psmouse, "Powering off touchpad.\n");
++		psmouse_set_state(psmouse, PSMOUSE_IGNORE);
++
++		if (ps2_command(ps2dev, NULL, 0xec) ||
++				ps2_command(ps2dev, NULL, 0xec) ||
++				ps2_command(ps2dev, NULL, 0xea))
++			return -1;
++		/* probably won't see an ACK, the touchpad will be off */
++		ps2_sendbyte(&psmouse->ps2dev, 0xec, 20);
++	}
++      
++	return 0;
++}
++
++/*
++ * poll the touchpad for current motion packet.
++ * Used in resync.
++ * Note: We can't poll, so always return failure.
++ */
++static int hgpk_poll(struct psmouse *psmouse)
++{
++	return -1;
++}
++
++static int hgpk_reconnect(struct psmouse *psmouse)
++{
++	if (olpc_board_at_least(olpc_board(0xb2)))
++		if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON)
++			return 0;
++
++	psmouse_reset(psmouse);
++
++	if (hgpk_advanced_mode(psmouse)) {
++		hgpk_err(psmouse, "failed to reenable advanced mode.\n");
++		return -1;
++	}
++
++	return 0;
++}
++
++static ssize_t hgpk_show_powered(struct device *dev,
++		struct device_attribute *attr, char *buf)
++{
++	struct serio *serio = to_serio_port(dev);
++	struct psmouse *psmouse;
++	struct hgpk_data *priv;
++	int retval;
++
++	retval = serio_pin_driver(serio);
++	if (retval)
++		return retval;
++
++        psmouse = serio_get_drvdata(serio);
++	priv = psmouse->private;
++
++	retval = sprintf(buf, "%d\n", priv->powered);
++	serio_unpin_driver(serio);
++	return retval;
++}
++
++static ssize_t hgpk_set_powered(struct device *dev,
++		struct device_attribute *attr, const char *buf, size_t count)
++{
++	struct serio *serio = to_serio_port(dev);
++	struct psmouse *psmouse;
++	struct hgpk_data *priv;
++	unsigned long val;
++	int retval;
++
++	if (*buf == '1')
++		val = 1;
++	else if (*buf == '0')
++		val = 0;
++	else
++		return -EINVAL;
++
++	retval = serio_pin_driver(serio);
++	if (retval)
++		return retval;
++
++/*
++ * FUCK IT.  I don't fucking care.  locking in psmouse is fucking retarded!
++	retval = mutex_lock_interruptible(&psmouse_mutex);
++	if (retval)
++		goto out_unpin;
++*/
++
++	psmouse = serio_get_drvdata(serio);
++	priv = psmouse->private;
++
++	if (val == priv->powered)
++		goto done;
++
++	retval = hgpk_toggle_power(psmouse, val);
++	if (!retval)
++		priv->powered = val;
++
++done:
++	serio_unpin_driver(serio);
++	return retval ? retval : count;
++}
++
++static DEVICE_ATTR(powered, S_IWUSR | S_IRUGO, hgpk_show_powered,
++		hgpk_set_powered);
++
++static void hgpk_disconnect(struct psmouse *psmouse)
++{
++	struct hgpk_data *priv = psmouse->private;
++	
++	device_remove_file(&psmouse->ps2dev.serio->dev, &dev_attr_powered);
++	psmouse_reset(psmouse);
++	flush_scheduled_work();
++	input_unregister_device(priv->gs);
++	kfree(priv);
++}
++
++static void hgpk_mode_switch(struct work_struct *work)
++{
++	struct delayed_work *w = container_of(work, struct delayed_work, work);
++	struct hgpk_data *priv = container_of(w, struct hgpk_data, switch_wq);
++	struct psmouse *psmouse = priv->psmouse;
++	struct ps2dev *ps2dev = &psmouse->ps2dev;
++	int pending_mode;
++
++	if (tpdebug)
++		hgpk_dbg(psmouse, "Starting mode switch to 0x%x. [%lu]\n",
++				priv->pending_mode, jiffies);
++
++	if (priv->pending_mode == priv->current_mode) {
++		priv->pending_mode = 0;
++		hgpk_dbg(psmouse, "Already in target mode, no-op.\n");
++		return;
++	}
++
++	/* tell the irq handler to ignore any further packets */
++	psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
++	priv->late = 0;
++
++	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
++		goto bad;
++
++	/*
++	 * ALPS tells us that it may take up to 20msec for the disable to
++	 * take effect; however, ps2_command() will wait up to 200msec for
++	 * the ACK to come back (and I'm assuming that by the time the
++	 * hardware sends back its ACK, it has stopped sending bytes).
++	 */
++	pending_mode = priv->pending_mode;
++
++	if (hgpk_new_mode(psmouse, priv->pending_mode))
++		goto bad;
++
++	/*
++	 * Deal with a potential race condition.
++	 *
++	 * If there is a brief tap of a stylus or a fingernail that
++	 * triggers a mode switch to PT mode, and the stylus/fingernail is
++	 * lifted after the DISABLE above, but before we reenable in the
++	 * new mode then we can get stuck in PT mode.
++	 */
++	if (pending_mode == HGPK_PT) {
++		priv->pending_mode = HGPK_GS;
++		queue_delayed_work(kpsmoused_wq, &priv->switch_wq,
++				msecs_to_jiffies(50));
++	}
++
++	return;
++bad:
++	hgpk_warn(psmouse, "Failure to switch modes, resetting device...\n");
++	hgpk_reconnect(psmouse);
++}
++
++static void hgpk_recalib_work(struct work_struct *work)
++{
++	struct delayed_work *w = container_of(work, struct delayed_work, work);
++	struct hgpk_data *priv = container_of(w, struct hgpk_data, recalib_wq);
++	struct psmouse *psmouse = priv->psmouse;
++
++	if (tpdebug)
++		hgpk_dbg(psmouse, "Recalibrating touchpad..\n");
++
++	if (hgpk_force_recalibrate(psmouse))
++		hgpk_err(psmouse, "Recalibration failed!\n");
++}
++
++int olpc_init(struct psmouse *psmouse)
++{
++	struct hgpk_data *priv;
++	struct input_dev *pt = psmouse->dev;
++	struct input_dev *gs;
++
++	priv = kzalloc(sizeof(struct hgpk_data), GFP_KERNEL);
++	gs = input_allocate_device();
++	if (!priv || !gs)
++		goto init_fail;
++
++	psmouse->private = priv;
++	priv->gs = gs;
++	priv->psmouse = psmouse;
++	priv->powered = 1;
++
++	psmouse_reset(psmouse);
++
++	if (hgpk_advanced_mode(psmouse)) {
++		hgpk_err(psmouse, "failed to enable advanced mode\n");
++		goto init_fail;
++	}
++
++	/* Unset things that psmouse-base sets that we don't have */
++	pt->evbit[0] &= ~BIT(EV_REL);
++	pt->keybit[LONG(BTN_MOUSE)] &= ~BIT(BTN_MIDDLE);
++	pt->relbit[0] &= ~(BIT(REL_X) | BIT(REL_Y));
++
++	/* Set all the things we *do* have */
++	set_bit(EV_KEY, pt->evbit);
++	set_bit(EV_ABS, pt->evbit);
++
++	set_bit(BTN_LEFT, pt->keybit);
++	set_bit(BTN_RIGHT, pt->keybit);
++	set_bit(BTN_TOUCH, pt->keybit);
++
++	input_set_abs_params(pt, ABS_X, 2, 1000, 0, 0);
++	input_set_abs_params(pt, ABS_Y, 0, 717, 0, 0);
++        input_set_abs_params(pt, ABS_PRESSURE, 0, 127, 0, 0);
++
++	snprintf(priv->phys, sizeof(priv->phys),
++		"%s/input1", psmouse->ps2dev.serio->phys);
++	gs->phys = priv->phys;
++	gs->name = "OLPC ALPS GlideSensor";
++	gs->id.bustype = BUS_I8042;
++	gs->id.vendor  = 0x0002;
++	gs->id.product = PSMOUSE_OLPC;
++	gs->id.version = psmouse->model;
++
++	set_bit(EV_KEY, gs->evbit);
++	set_bit(EV_ABS, gs->evbit);
++
++	set_bit(BTN_LEFT, gs->keybit);
++	set_bit(BTN_RIGHT, gs->keybit);
++	set_bit(BTN_TOUCH, gs->keybit);
++
++	input_set_abs_params(gs, ABS_X, 350, 512, 0, 0);
++	input_set_abs_params(gs, ABS_Y, 70, 325, 0, 0);
++	input_set_abs_params(gs, ABS_PRESSURE, 0, 15, 0, 0);
++
++	if (input_register_device(gs)) {
++		hgpk_err(psmouse, "Failed to register GlideSensor\n");
++		goto init_fail;
++	}
++
++	psmouse->protocol_handler = hgpk_process_byte;
++	psmouse->poll = hgpk_poll;
++	psmouse->disconnect = hgpk_disconnect;
++	psmouse->reconnect = hgpk_reconnect;
++	psmouse->pktsize = 6;
++
++	/* Disable the idle resync. */
++	psmouse->resync_time = 0;
++	/* Reset after a lot of bad bytes. */
++	psmouse->resetafter = 1024;
++
++	INIT_DELAYED_WORK(&priv->switch_wq, hgpk_mode_switch);
++	INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work);
++
++	if (device_create_file(&psmouse->ps2dev.serio->dev,
++			&dev_attr_powered)) {
++		hgpk_err(psmouse, "Failed to create sysfs attribute\n");
++		goto attr_fail;
++	}
++
++
++	return 0;
++
++attr_fail:
++	input_unregister_device(gs);
++	gs = NULL;
++init_fail:
++	input_free_device(gs);
++	kfree(priv);
++	return -1;
++}
++
++int olpc_detect(struct psmouse *psmouse, int set_properties)
++{
++	int version;
++
++	version = hgpk_get_model(psmouse);
++	if (version < 0)
++		return version;
++
++	if (set_properties) {
++		psmouse->vendor = "ALPS";
++		psmouse->name = "PenTablet";
++		psmouse->model = version;
++	}
++	return 0;
++}
+diff -purN linux_2.6.24_org/drivers/input/mouse/olpc.h linux_2.6.24_olpc/drivers/input/mouse/olpc.h
+--- linux_2.6.24_org/drivers/input/mouse/olpc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/input/mouse/olpc.h	2008-02-15 18:59:14.000000000 +0000
+@@ -0,0 +1,78 @@
++/*
++ * OLPC touchpad PS/2 mouse driver
++ *
++ * Copyright (c) 2006 One Laptop Per Child, inc.
++ *
++ * This driver is partly based on the ALPS driver.
++ * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
++ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++#ifndef _OLPC_H
++#define _OLPC_H
++
++enum hgpk_model_t {
++	HGPK_MODEL_PreA = 0x0a, /* pre-B1s */
++	HGPK_MODEL_A = 0x14,    /* found on B1s, PT disabled in hardware */
++	HGPK_MODEL_B = 0x28,	/* B2s, has capacitance issues */
++	HGPK_MODEL_C = 0x3c,
++	HGPK_MODEL_D = 0x50,    /* C1, mass production */
++};
++
++#define HGPK_GS		0xff       /* The GlideSensor */
++#define HGPK_PT		0xcf       /* The PenTablet */
++
++struct hgpk_packet {
++	struct input_dev *dev;
++	int x, y, z;
++	unsigned char mode_switch;
++	unsigned int pt_down:1, gs_down:1;
++	unsigned int left:1, right:1;
++};
++
++struct hgpk_data {
++	struct input_dev *gs;		/* GlideSensor */
++	struct psmouse *psmouse;
++	char name[32];			/* Name */
++	char phys[32];			/* Phys */
++	int pending_mode;
++	int current_mode;
++	s64 late;
++	int axis_errors;
++	int repeat_pkts;
++	int powered;
++	unsigned long recalib_window;
++	struct delayed_work switch_wq;
++	struct delayed_work recalib_wq;
++};
++
++#define hgpk_dbg(psmouse, format, arg...)		\
++	dev_dbg(&(psmouse)->ps2dev.serio->dev, format, ## arg)
++#define hgpk_err(psmouse, format, arg...)		\
++	dev_err(&(psmouse)->ps2dev.serio->dev, format, ## arg)
++#define hgpk_info(psmouse, format, arg...)		\
++	dev_info(&(psmouse)->ps2dev.serio->dev, format, ## arg)
++#define hgpk_warn(psmouse, format, arg...)		\
++	dev_warn(&(psmouse)->ps2dev.serio->dev, format, ## arg)
++#define hgpk_notice(psmouse, format, arg...)		\
++	dev_notice(&(psmouse)->ps2dev.serio->dev, format, ## arg)
++
++#ifdef CONFIG_MOUSE_PS2_OLPC
++int olpc_detect(struct psmouse *psmouse, int set_properties);
++int olpc_init(struct psmouse *psmouse);
++#else
++inline int olpc_detect(struct psmouse *psmouse, int set_properties)
++{
++	return -ENOSYS;
++}
++inline int olpc_init(struct psmouse *psmouse)
++{
++	return -ENOSYS;
++}
++#endif
++
++#endif
+diff -purN linux_2.6.24_org/drivers/input/mouse/psmouse-base.c linux_2.6.24_olpc/drivers/input/mouse/psmouse-base.c
+--- linux_2.6.24_org/drivers/input/mouse/psmouse-base.c	2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/mouse/psmouse-base.c	2008-02-15 18:59:14.000000000 +0000
+@@ -26,6 +26,7 @@
+ #include "synaptics.h"
+ #include "logips2pp.h"
+ #include "alps.h"
++#include "olpc.h"
+ #include "lifebook.h"
+ #include "trackpoint.h"
+ #include "touchkit_ps2.h"
+@@ -103,7 +104,7 @@ static struct attribute_group psmouse_at
+  */
+ static DEFINE_MUTEX(psmouse_mutex);
+ 
+-static struct workqueue_struct *kpsmoused_wq;
++struct workqueue_struct *kpsmoused_wq;
+ 
+ struct psmouse_protocol {
+ 	enum psmouse_type type;
+@@ -221,7 +222,7 @@ static inline void __psmouse_set_state(s
+  * is not a concern.
+  */
+ 
+-static void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
++void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
+ {
+ 	serio_pause_rx(psmouse->ps2dev.serio);
+ 	__psmouse_set_state(psmouse, new_state);
+@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(str
+ 			goto out;
+ 		}
+ 
+-		if (psmouse->packet[1] == PSMOUSE_RET_ID) {
++		if (psmouse->packet[1] == PSMOUSE_RET_ID || psmouse->packet[1] == PSMOUSE_RET_BAT) {
+ 			__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+ 			serio_reconnect(serio);
+ 			goto out;
+@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psm
+ 		}
+ 	}
+ 
++/*
++ * Try OLPC touchpad.
++ */
+ 	if (max_proto > PSMOUSE_IMEX) {
++		if (olpc_detect(psmouse, set_properties) == 0) {
++			if (!set_properties || olpc_init(psmouse) == 0)
++				return PSMOUSE_OLPC;
++/*
++ * Init failed, try basic relative protocols
++ */
++			max_proto = PSMOUSE_IMEX;
++		}
++	}
+ 
++	if (max_proto > PSMOUSE_IMEX) {
+ 		if (genius_detect(psmouse, set_properties) == 0)
+ 			return PSMOUSE_GENPS;
+ 
+@@ -763,6 +777,14 @@ static const struct psmouse_protocol psm
+ 		.detect		= touchkit_ps2_detect,
+ 	},
+ #endif
++#ifdef CONFIG_MOUSE_PS2_OLPC
++	{
++		.type		= PSMOUSE_OLPC,
++		.name		= "OLPC",
++		.alias		= "olpc",
++		.detect		= olpc_detect,
++	},
++#endif
+ 	{
+ 		.type		= PSMOUSE_CORTRON,
+ 		.name		= "CortronPS/2",
+diff -purN linux_2.6.24_org/drivers/input/mouse/psmouse.h linux_2.6.24_olpc/drivers/input/mouse/psmouse.h
+--- linux_2.6.24_org/drivers/input/mouse/psmouse.h	2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/mouse/psmouse.h	2008-02-15 18:59:14.000000000 +0000
+@@ -88,6 +88,7 @@ enum psmouse_type {
+ 	PSMOUSE_LIFEBOOK,
+ 	PSMOUSE_TRACKPOINT,
+ 	PSMOUSE_TOUCHKIT_PS2,
++	PSMOUSE_OLPC,
+ 	PSMOUSE_CORTRON,
+ 	PSMOUSE_AUTO		/* This one should always be last */
+ };
+@@ -95,7 +96,9 @@ enum psmouse_type {
+ int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command);
+ int psmouse_reset(struct psmouse *psmouse);
+ void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution);
++void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state);
+ 
++extern struct workqueue_struct *kpsmoused_wq;
+ 
+ struct psmouse_attribute {
+ 	struct device_attribute dattr;
+diff -purN linux_2.6.24_org/drivers/input/serio/i8042.c linux_2.6.24_olpc/drivers/input/serio/i8042.c
+--- linux_2.6.24_org/drivers/input/serio/i8042.c	2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/serio/i8042.c	2008-02-15 18:59:14.000000000 +0000
+@@ -874,6 +874,11 @@ static long i8042_panic_blink(long count
+ #undef DELAY
+ 
+ #ifdef CONFIG_PM
++
++#ifdef CONFIG_OLPC
++#include <asm/olpc.h>
++#endif
++
+ /*
+  * Here we try to restore the original BIOS settings. We only want to
+  * do that once, when we really suspend, not when we taking memory
+@@ -884,8 +889,15 @@ static long i8042_panic_blink(long count
+ static int i8042_suspend(struct platform_device *dev, pm_message_t state)
+ {
+ 	if (dev->dev.power.power_state.event != state.event) {
++#ifdef CONFIG_OLPC
++		/* Anything newer than B2 remains powered; no reset needed */
++		if (!olpc_board_at_least(olpc_board_pre(0xb3))) {
++#endif
+ 		if (state.event == PM_EVENT_SUSPEND)
+ 			i8042_controller_reset();
++#ifdef CONFIG_OLPC
++		}
++#endif
+ 
+ 		dev->dev.power.power_state = state;
+ 	}
+@@ -908,9 +920,15 @@ static int i8042_resume(struct platform_
+ 	if (dev->dev.power.power_state.event == PM_EVENT_ON)
+ 		return 0;
+ 
++#ifdef CONFIG_OLPC
++	if (!olpc_board_at_least(olpc_board_pre(0xb3))) {
++#endif
+ 	error = i8042_controller_check();
+ 	if (error)
+ 		return error;
++#ifdef CONFIG_OLPC
++	}
++#endif
+ 
+ 	error = i8042_controller_selftest();
+ 	if (error)
+diff -purN linux_2.6.24_org/drivers/input/serio/serio.c linux_2.6.24_olpc/drivers/input/serio/serio.c
+--- linux_2.6.24_org/drivers/input/serio/serio.c	2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/serio/serio.c	2008-02-15 18:59:14.000000000 +0000
+@@ -910,11 +910,22 @@ static int serio_uevent(struct device *d
+ #endif /* CONFIG_HOTPLUG */
+ 
+ #ifdef CONFIG_PM
++
++#ifdef CONFIG_OLPC
++#include <asm/olpc.h>
++#endif
++
+ static int serio_suspend(struct device *dev, pm_message_t state)
+ {
+ 	if (dev->power.power_state.event != state.event) {
++#ifdef CONFIG_OLPC
++		if (!olpc_board_at_least(olpc_board_pre(0xb3))) {
++#endif
+ 		if (state.event == PM_EVENT_SUSPEND)
+ 			serio_cleanup(to_serio_port(dev));
++#ifdef CONFIG_OLPC
++		}
++#endif
+ 
+ 		dev->power.power_state = state;
+ 	}
+diff -purN linux_2.6.24_org/drivers/Kconfig linux_2.6.24_olpc/drivers/Kconfig
+--- linux_2.6.24_org/drivers/Kconfig	2008-02-15 20:11:21.000000000 +0000
++++ linux_2.6.24_olpc/drivers/Kconfig	2008-02-15 18:58:34.000000000 +0000
+@@ -94,6 +94,8 @@ source "drivers/auxdisplay/Kconfig"
+ 
+ source "drivers/kvm/Kconfig"
+ 
++source "drivers/sysprof/Kconfig"
++
+ source "drivers/uio/Kconfig"
+ 
+ source "drivers/virtio/Kconfig"
+diff -purN linux_2.6.24_org/drivers/Makefile linux_2.6.24_olpc/drivers/Makefile
+--- linux_2.6.24_org/drivers/Makefile	2008-02-15 20:11:24.000000000 +0000
++++ linux_2.6.24_olpc/drivers/Makefile	2008-02-15 18:58:43.000000000 +0000
+@@ -23,6 +23,8 @@ obj-y				+= char/
+ 
+ obj-$(CONFIG_CONNECTOR)		+= connector/
+ 
++obj-$(CONFIG_SYSPROF)		+= sysprof/
++
+ # i810fb and intelfb depend on char/agp/
+ obj-$(CONFIG_FB_I810)           += video/i810/
+ obj-$(CONFIG_FB_INTEL)          += video/intelfb/
+diff -purN linux_2.6.24_org/drivers/media/video/cafe_ccic.c linux_2.6.24_olpc/drivers/media/video/cafe_ccic.c
+--- linux_2.6.24_org/drivers/media/video/cafe_ccic.c	2008-02-15 20:11:25.000000000 +0000
++++ linux_2.6.24_olpc/drivers/media/video/cafe_ccic.c	2008-02-15 18:58:44.000000000 +0000
+@@ -372,6 +372,10 @@ static int cafe_smbus_write_data(struct 
+ 	rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
+ 	cafe_reg_write(cam, REG_TWSIC1, rval);
+ 	spin_unlock_irqrestore(&cam->dev_lock, flags);
++	mdelay(2); /* It'll probably take about 900µs anyway, and the
++		      CAFÉ is apparently quite sensitive to being poked
++		      at this point. If we can work out precisely what's
++		      going on and reduce this delay, it would be nice. */
+ 
+ 	/*
+ 	 * Time to wait for the write to complete.  THIS IS A RACY
+@@ -907,8 +911,6 @@ static int cafe_cam_configure(struct caf
+ 	struct v4l2_format fmt;
+ 	int ret, zero = 0;
+ 
+-	if (cam->state != S_IDLE)
+-		return -EINVAL;
+ 	fmt.fmt.pix = cam->pix_format;
+ 	ret = __cafe_cam_cmd(cam, VIDIOC_INT_INIT, &zero);
+ 	if (ret == 0)
+@@ -2237,14 +2239,18 @@ static int cafe_pci_suspend(struct pci_d
+ 	int ret;
+ 	enum cafe_state cstate;
+ 
++	mutex_lock(&cam->s_mutex);
+ 	ret = pci_save_state(pdev);
+-	if (ret)
++	if (ret) {
++		cam_warn(cam, "Unable to save PCI state\n");
+ 		return ret;
++	}
+ 	cstate = cam->state; /* HACK - stop_dma sets to idle */
+ 	cafe_ctlr_stop_dma(cam);
+ 	cafe_ctlr_power_down(cam);
+ 	pci_disable_device(pdev);
+ 	cam->state = cstate;
++	/* hold mutex until restore */
+ 	return 0;
+ }
+ 
+@@ -2263,16 +2269,18 @@ static int cafe_pci_resume(struct pci_de
+ 		cam_warn(cam, "Unable to re-enable device on resume!\n");
+ 		return ret;
+ 	}
++	/* we're still holding mutex from suspend */
+ 	cafe_ctlr_init(cam);
+ 	cafe_ctlr_power_down(cam);
+ 
+-	mutex_lock(&cam->s_mutex);
+-	if (cam->users > 0) {
+-		cafe_ctlr_power_up(cam);
+-		__cafe_cam_reset(cam);
+-	}
+-	mutex_unlock(&cam->s_mutex);
+-
++ 	if (cam->users > 0) {
++ 		cafe_ctlr_power_up(cam);
++ 		__cafe_cam_reset(cam);
++ 	}
++	else
++		cafe_ctlr_power_down(cam);
++ 	mutex_unlock(&cam->s_mutex);
++ 
+ 	set_bit(CF_CONFIG_NEEDED, &cam->flags);
+ 	if (cam->state == S_SPECREAD)
+ 		cam->state = S_IDLE;  /* Don't bother restarting */
+diff -purN linux_2.6.24_org/drivers/misc/Kconfig linux_2.6.24_olpc/drivers/misc/Kconfig
+--- linux_2.6.24_org/drivers/misc/Kconfig	2008-02-15 20:11:42.000000000 +0000
++++ linux_2.6.24_olpc/drivers/misc/Kconfig	2008-02-15 18:58:52.000000000 +0000
+@@ -219,6 +219,11 @@ config THINKPAD_ACPI_BAY
+ 
+ 	  If you are not sure, say Y here.
+ 
++config EEPROM_93CX6
++	tristate "EEPROM 93CX6 support"
++	---help---
++	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
++	  The driver supports both read as well as write commands.
+ 
+ config ATMEL_SSC
+ 	tristate "Device driver for Atmel SSC peripheral"
+diff -purN linux_2.6.24_org/drivers/mmc/card/block.c linux_2.6.24_olpc/drivers/mmc/card/block.c
+--- linux_2.6.24_org/drivers/mmc/card/block.c	2008-02-15 20:11:13.000000000 +0000
++++ linux_2.6.24_olpc/drivers/mmc/card/block.c	2008-02-15 18:58:17.000000000 +0000
+@@ -237,6 +237,13 @@ static int mmc_blk_issue_rq(struct mmc_q
+ 		if (brq.data.blocks > card->host->max_blk_count)
+ 			brq.data.blocks = card->host->max_blk_count;
+ 
++		if (mmc_card_sd(card) && !card->host->ios.clock) {
++			printk(KERN_ERR "%s: I/O to stopped card\n",
++			       req->rq_disk->disk_name);
++			goto cmd_err;
++		}
++		mmc_set_data_timeout(&brq.data, card);
++
+ 		/*
+ 		 * If the host doesn't support multiple block writes, force
+ 		 * block writes to single block. SD cards are excepted from
+diff -purN linux_2.6.24_org/drivers/mmc/host/sdhci.c linux_2.6.24_olpc/drivers/mmc/host/sdhci.c
+--- linux_2.6.24_org/drivers/mmc/host/sdhci.c	2008-02-15 20:11:13.000000000 +0000
++++ linux_2.6.24_olpc/drivers/mmc/host/sdhci.c	2008-02-15 18:58:17.000000000 +0000
+@@ -441,6 +441,12 @@ static void sdhci_prepare_data(struct sd
+ 			break;
+ 	}
+ 
++	/*
++	 * There's an off-by-one error in the hw that we need to
++	 * compensate for.
++	 */
++	count++;
++
+ 	if (count >= 0xF) {
+ 		printk(KERN_WARNING "%s: Too large timeout requested!\n",
+ 			mmc_hostname(host->mmc));
+@@ -728,19 +734,17 @@ static void sdhci_set_power(struct sdhci
+ 	if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
+ 		writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
+ 
+-	pwr = SDHCI_POWER_ON;
+-
+ 	switch (1 << power) {
+ 	case MMC_VDD_165_195:
+-		pwr |= SDHCI_POWER_180;
++		pwr = SDHCI_POWER_180;
+ 		break;
+ 	case MMC_VDD_29_30:
+ 	case MMC_VDD_30_31:
+-		pwr |= SDHCI_POWER_300;
++		pwr = SDHCI_POWER_300;
+ 		break;
+ 	case MMC_VDD_32_33:
+ 	case MMC_VDD_33_34:
+-		pwr |= SDHCI_POWER_330;
++		pwr = SDHCI_POWER_330;
+ 		break;
+ 	default:
+ 		BUG();
+@@ -748,6 +752,10 @@ static void sdhci_set_power(struct sdhci
+ 
+ 	writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
+ 
++	pwr |= SDHCI_POWER_ON;
++
++	writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
++
+ out:
+ 	host->power = power;
+ }
+diff -purN linux_2.6.24_org/drivers/mtd/nand/cafe_nand.c linux_2.6.24_olpc/drivers/mtd/nand/cafe_nand.c
+--- linux_2.6.24_org/drivers/mtd/nand/cafe_nand.c	2008-02-15 20:11:46.000000000 +0000
++++ linux_2.6.24_olpc/drivers/mtd/nand/cafe_nand.c	2008-02-15 18:58:57.000000000 +0000
+@@ -11,6 +11,7 @@
+ #undef DEBUG
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/rslib.h>
+ #include <linux/pci.h>
+ #include <linux/delay.h>
+@@ -52,6 +53,7 @@
+ 
+ struct cafe_priv {
+ 	struct nand_chip nand;
++	struct mtd_partition *parts;
+ 	struct pci_dev *pdev;
+ 	void __iomem *mmio;
+ 	struct rs_control *rs;
+@@ -84,6 +86,10 @@ static unsigned int numtimings;
+ static int timing[3];
+ module_param_array(timing, int, &numtimings, 0644);
+ 
++#ifdef CONFIG_MTD_PARTITIONS
++static const char *part_probes[] = { "RedBoot", NULL };
++#endif
++
+ /* Hrm. Why isn't this already conditional on something in the struct device? */
+ #define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
+ 
+@@ -620,7 +626,9 @@ static int __devinit cafe_nand_probe(str
+ {
+ 	struct mtd_info *mtd;
+ 	struct cafe_priv *cafe;
++	struct mtd_partition *parts;
+ 	uint32_t ctrl;
++	int nr_parts;
+ 	int err = 0;
+ 
+ 	/* Very old versions shared the same PCI ident for all three
+@@ -787,7 +795,18 @@ static int __devinit cafe_nand_probe(str
+ 		goto out_irq;
+ 
+ 	pci_set_drvdata(pdev, mtd);
++
++	/* We register the whole device first, separate from the partitions */
+ 	add_mtd_device(mtd);
++
++#ifdef CONFIG_MTD_PARTITIONS
++	nr_parts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
++	if (nr_parts > 0) {
++		cafe->parts = parts;
++		dev_info(&cafe->pdev->dev, "%d RedBoot partitions found\n", nr_parts);
++		add_mtd_partitions(mtd, parts, nr_parts);
++	}
++#endif
+ 	goto out;
+ 
+  out_irq:
+diff -purN linux_2.6.24_org/drivers/mtd/redboot.c linux_2.6.24_olpc/drivers/mtd/redboot.c
+--- linux_2.6.24_org/drivers/mtd/redboot.c	2008-02-15 20:11:46.000000000 +0000
++++ linux_2.6.24_olpc/drivers/mtd/redboot.c	2008-02-15 18:58:58.000000000 +0000
+@@ -59,16 +59,31 @@ static int parse_redboot_partitions(stru
+ 	static char nullstring[] = "unallocated";
+ #endif
+ 
++	if ( directory < 0 ) {
++		offset = master->size + directory * master->erasesize;
++		while (master->block_isbad && 
++		       master->block_isbad(master, offset)) {
++			if (!offset) {
++			nogood:
++				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++				return -EIO;
++			}
++			offset -= master->erasesize;
++		}
++	} else {
++		offset = directory * master->erasesize;
++		while (master->block_isbad && 
++		       master->block_isbad(master, offset)) {
++			offset += master->erasesize;
++			if (offset == master->size)
++				goto nogood;
++		}
++	}
+ 	buf = vmalloc(master->erasesize);
+ 
+ 	if (!buf)
+ 		return -ENOMEM;
+ 
+-	if ( directory < 0 )
+-		offset = master->size + directory*master->erasesize;
+-	else
+-		offset = directory*master->erasesize;
+-
+ 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ 	       master->name, offset);
+ 
+diff -purN linux_2.6.24_org/drivers/net/forcedeth.c linux_2.6.24_olpc/drivers/net/forcedeth.c
+--- linux_2.6.24_org/drivers/net/forcedeth.c	2008-02-15 20:11:19.000000000 +0000
++++ linux_2.6.24_olpc/drivers/net/forcedeth.c	2008-02-15 18:58:33.000000000 +0000
+@@ -3559,11 +3559,13 @@ static int nv_request_irq(struct net_dev
+ 	}
+ 	if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
+ 		if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
++			pci_intx(np->pci_dev, 0);
+ 			np->msi_flags |= NV_MSI_ENABLED;
+ 			dev->irq = np->pci_dev->irq;
+ 			if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0) {
+ 				printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+ 				pci_disable_msi(np->pci_dev);
++				pci_intx(np->pci_dev, 1);
+ 				np->msi_flags &= ~NV_MSI_ENABLED;
+ 				dev->irq = np->pci_dev->irq;
+ 				goto out_err;
+@@ -3606,6 +3608,7 @@ static void nv_free_irq(struct net_devic
+ 		free_irq(np->pci_dev->irq, dev);
+ 		if (np->msi_flags & NV_MSI_ENABLED) {
+ 			pci_disable_msi(np->pci_dev);
++			pci_intx(np->pci_dev, 1);
+ 			np->msi_flags &= ~NV_MSI_ENABLED;
+ 		}
+ 	}
+diff -purN linux_2.6.24_org/drivers/pci/quirks.c linux_2.6.24_olpc/drivers/pci/quirks.c
+--- linux_2.6.24_org/drivers/pci/quirks.c	2008-02-15 20:11:33.000000000 +0000
++++ linux_2.6.24_olpc/drivers/pci/quirks.c	2008-02-15 18:58:50.000000000 +0000
+@@ -1359,6 +1359,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260b, quirk_intel_pcie_pm);
+ 
+ /*
++ * According to Tom Sylla, the Geode does not support PCI power management
++ * transition, so we shouldn't need the D3hot delay.
++ */
++static void __init quirk_geode_pci_pm(struct pci_dev *dev)
++{
++	pci_pm_d3_delay = 0;
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, quirk_geode_pci_pm);
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_geode_pci_pm);
++
++/*
+  * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
+  * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
+  * Re-allocate the region if needed...
+diff -purN linux_2.6.24_org/drivers/power/ds2760_battery.c linux_2.6.24_olpc/drivers/power/ds2760_battery.c
+--- linux_2.6.24_org/drivers/power/ds2760_battery.c	2008-02-15 20:11:45.000000000 +0000
++++ linux_2.6.24_olpc/drivers/power/ds2760_battery.c	2008-02-15 18:58:56.000000000 +0000
+@@ -409,6 +409,7 @@ static int ds2760_battery_suspend(struct
+ 	struct ds2760_device_info *di = platform_get_drvdata(pdev);
+ 
+ 	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
++	power_supply_changed(&di->bat);
+ 
+ 	return 0;
+ }
+diff -purN linux_2.6.24_org/drivers/power/olpc_battery.c linux_2.6.24_olpc/drivers/power/olpc_battery.c
+--- linux_2.6.24_org/drivers/power/olpc_battery.c	2008-02-15 20:11:45.000000000 +0000
++++ linux_2.6.24_olpc/drivers/power/olpc_battery.c	2008-02-15 18:58:56.000000000 +0000
+@@ -14,12 +14,13 @@
+ #include <linux/power_supply.h>
+ #include <linux/jiffies.h>
+ #include <linux/sched.h>
++#include <asm/io.h>
+ #include <asm/olpc.h>
+ 
+ 
+ #define EC_BAT_VOLTAGE	0x10	/* uint16_t,	*9.76/32,    mV   */
+ #define EC_BAT_CURRENT	0x11	/* int16_t,	*15.625/120, mA   */
+-#define EC_BAT_ACR	0x12
++#define EC_BAT_ACR	0x12	/* int16_t	*416.667    µAh  */
+ #define EC_BAT_TEMP	0x13	/* uint16_t,	*100/256,   °C  */
+ #define EC_AMB_TEMP	0x14	/* uint16_t,	*100/256,   °C  */
+ #define EC_BAT_STATUS	0x15	/* uint8_t,	bitmask */
+@@ -84,6 +85,8 @@ static struct power_supply olpc_ac = {
+ 	.get_property = olpc_ac_get_prop,
+ };
+ 
++static char bat_serial[17]; /* Ick */
++
+ /*********************************************************************
+  *		Battery properties
+  *********************************************************************/
+@@ -94,6 +97,7 @@ static int olpc_bat_get_property(struct 
+ 	int ret = 0;
+ 	int16_t ec_word;
+ 	uint8_t ec_byte;
++	uint64_t ser_buf;
+ 
+ 	ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
+ 	if (ret)
+@@ -127,8 +131,8 @@ static int olpc_bat_get_property(struct 
+ 				val->intval = POWER_SUPPLY_STATUS_FULL;
+ 			else /* Not _necessarily_ true but EC doesn't tell all yet */
+ 				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+-			break;
+ 		}
++		break;
+ 	case POWER_SUPPLY_PROP_PRESENT:
+ 		val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+ 		break;
+@@ -249,6 +253,22 @@ static int olpc_bat_get_property(struct 
+ 		ec_word = be16_to_cpu(ec_word);
+ 		val->intval = ec_word * 100 / 256;
+ 		break;
++	case POWER_SUPPLY_PROP_ACCUM_CURRENT:
++		ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
++		if (ret)
++			return ret;
++
++		ec_word = be16_to_cpu(ec_word);
++		val->intval = (uint16_t)ec_word;
++		break;
++	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
++		ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
++		if (ret)
++			return ret;
++
++		sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
++		val->strval = bat_serial;
++		break;
+ 	default:
+ 		ret = -EINVAL;
+ 		break;
+@@ -268,7 +288,51 @@ static enum power_supply_property olpc_b
+ 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ 	POWER_SUPPLY_PROP_TEMP,
+ 	POWER_SUPPLY_PROP_TEMP_AMBIENT,
++	POWER_SUPPLY_PROP_ACCUM_CURRENT,
+ 	POWER_SUPPLY_PROP_MANUFACTURER,
++	POWER_SUPPLY_PROP_SERIAL_NUMBER,
++};
++
++/* EEPROM reading goes completely around the power_supply API, sadly */
++
++#define EEPROM_START	0x20
++#define EEPROM_END	0x80
++#define EEPROM_SIZE	(EEPROM_END - EEPROM_START)
++
++static ssize_t olpc_bat_eeprom_read(struct kobject *kobj, char *buf, loff_t off,
++		size_t count)
++{
++	uint8_t ec_byte;
++	int ret, end;
++
++	if (off >= EEPROM_SIZE)
++		return 0;
++	if (off + count > EEPROM_SIZE)
++		count = EEPROM_SIZE - off;
++
++	end = EEPROM_START + off + count;
++	for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
++		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
++				&buf[ec_byte - EEPROM_START], 1);
++		if (ret) {
++			printk(KERN_ERR "olpc-battery:  EC command "
++					"EC_BAT_EEPROM @ 0x%x failed -"
++					" %d!\n", ec_byte, ret);
++			return -EIO;
++		}
++	}
++
++	return count;
++}
++
++static struct bin_attribute olpc_bat_eeprom = {
++	.attr = {
++		.name = "eeprom",
++		.mode = S_IRUGO, 
++		.owner = THIS_MODULE,
++	},
++	.size = 0,
++	.read = olpc_bat_eeprom_read,
+ };
+ 
+ /*********************************************************************
+@@ -299,7 +363,7 @@ static int __init olpc_bat_init(void)
+ 
+ 	if (!olpc_platform_info.ecver)
+ 		return -ENXIO;
+-	if (olpc_platform_info.ecver < 0x43) {
++	if (olpc_platform_info.ecver < 0x44) {
+ 		printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver);
+ 		return -ENXIO;
+ 	}
+@@ -324,9 +388,15 @@ static int __init olpc_bat_init(void)
+ 	if (ret)
+ 		goto battery_failed;
+ 
++	ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
++	if (ret)
++		goto eeprom_failed;
++
+ 	olpc_register_battery_callback(&olpc_battery_trigger_uevent);
+ 	goto success;
+ 
++eeprom_failed:
++	power_supply_unregister(&olpc_bat);
+ battery_failed:
+ 	power_supply_unregister(&olpc_ac);
+ ac_failed:
+@@ -338,6 +408,7 @@ success:
+ static void __exit olpc_bat_exit(void)
+ {
+ 	olpc_deregister_battery_callback();
++	device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
+ 	power_supply_unregister(&olpc_bat);
+ 	power_supply_unregister(&olpc_ac);
+ 	platform_device_unregister(bat_pdev);
+diff -purN linux_2.6.24_org/drivers/power/power_supply_sysfs.c linux_2.6.24_olpc/drivers/power/power_supply_sysfs.c
+--- linux_2.6.24_org/drivers/power/power_supply_sysfs.c	2008-02-15 20:11:45.000000000 +0000
++++ linux_2.6.24_olpc/drivers/power/power_supply_sysfs.c	2008-02-15 18:58:56.000000000 +0000
+@@ -114,9 +114,11 @@ static struct device_attribute power_sup
+ 	POWER_SUPPLY_ATTR(time_to_empty_avg),
+ 	POWER_SUPPLY_ATTR(time_to_full_now),
+ 	POWER_SUPPLY_ATTR(time_to_full_avg),
++	POWER_SUPPLY_ATTR(accum_current),
+ 	/* Properties of type `const char *' */
+ 	POWER_SUPPLY_ATTR(model_name),
+ 	POWER_SUPPLY_ATTR(manufacturer),
++	POWER_SUPPLY_ATTR(serial_number),
+ };
+ 
+ static ssize_t power_supply_show_static_attrs(struct device *dev,
+diff -purN linux_2.6.24_org/drivers/serial/serial_core.c linux_2.6.24_olpc/drivers/serial/serial_core.c
+--- linux_2.6.24_org/drivers/serial/serial_core.c	2008-02-15 20:11:33.000000000 +0000
++++ linux_2.6.24_olpc/drivers/serial/serial_core.c	2008-02-15 18:58:51.000000000 +0000
+@@ -2013,6 +2013,7 @@ int uart_suspend_port(struct uart_driver
+ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
+ {
+ 	struct uart_state *state = drv->state + port->line;
++	struct ktermios termios;
+ 
+ 	mutex_lock(&state->mutex);
+ 
+@@ -2035,20 +2036,6 @@ int uart_resume_port(struct uart_driver 
+ 	 * Re-enable the console device after suspending.
+ 	 */
+ 	if (uart_console(port)) {
+-		struct ktermios termios;
+-
+-		/*
+-		 * First try to use the console cflag setting.
+-		 */
+-		memset(&termios, 0, sizeof(struct ktermios));
+-		termios.c_cflag = port->cons->cflag;
+-
+-		/*
+-		 * If that's unset, use the tty termios setting.
+-		 */
+-		if (state->info && state->info->tty && termios.c_cflag == 0)
+-			termios = *state->info->tty->termios;
+-
+ 		port->ops->set_termios(port, &termios, NULL);
+ 		console_start(port->cons);
+ 	}
+diff -purN linux_2.6.24_org/drivers/sysprof/config.h linux_2.6.24_olpc/drivers/sysprof/config.h
+--- linux_2.6.24_org/drivers/sysprof/config.h	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/sysprof/config.h	2008-02-15 18:58:59.000000000 +0000
+@@ -0,0 +1,23 @@
++/* config.h.  Generated by configure.  */
++/* config.h.in.  Generated from configure.ac by autoheader.  */
++
++/* Look for global separate debug info in this path */
++#define DEBUGDIR "/usr/local/lib/debug"
++
++/* Define to 1 if you have the `iberty' library (-liberty). */
++/* #undef HAVE_LIBIBERTY */
++
++/* Define to the address where bug reports for this package should be sent. */
++#define PACKAGE_BUGREPORT ""
++
++/* Define to the full name of this package. */
++#define PACKAGE_NAME "sysprof"
++
++/* Define to the full name and version of this package. */
++#define PACKAGE_STRING "sysprof 1.0.8"
++
++/* Define to the one symbol short name of this package. */
++#define PACKAGE_TARNAME "sysprof"
++
++/* Define to the version of this package. */
++#define PACKAGE_VERSION "1.0.8"
+diff -purN linux_2.6.24_org/drivers/sysprof/Kconfig linux_2.6.24_olpc/drivers/sysprof/Kconfig
+--- linux_2.6.24_org/drivers/sysprof/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/sysprof/Kconfig	2008-02-15 18:58:59.000000000 +0000
+@@ -0,0 +1,12 @@
++
++menu "Sysprof"
++
++config SYSPROF
++	tristate "Sysprof support"
++	help
++	 Say M here to include the sysprof-module.
++
++	 Sysprof is a sampling profiler that uses a kernel module,
++	 sysprof-module, to generate stacktraces which are then interpreted by
++	 the userspace program "sysprof".
++endmenu
+diff -purN linux_2.6.24_org/drivers/sysprof/Makefile linux_2.6.24_olpc/drivers/sysprof/Makefile
+--- linux_2.6.24_org/drivers/sysprof/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/sysprof/Makefile	2008-02-15 18:58:59.000000000 +0000
+@@ -0,0 +1 @@
++obj-$(CONFIG_SYSPROF)	+= sysprof-module.o
+diff -purN linux_2.6.24_org/drivers/sysprof/sysprof-module.c linux_2.6.24_olpc/drivers/sysprof/sysprof-module.c
+--- linux_2.6.24_org/drivers/sysprof/sysprof-module.c	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/sysprof/sysprof-module.c	2008-02-15 18:58:59.000000000 +0000
+@@ -0,0 +1,271 @@
++/* -*- c-basic-offset: 8 -*- */
++
++/* Sysprof -- Sampling, systemwide CPU profiler
++ * Copyright 2004, Red Hat, Inc.
++ * Copyright 2004, 2005, Soeren Sandmann
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#ifdef CONFIG_SMP
++# define __SMP__
++#endif
++#include <asm/atomic.h>
++#include <linux/kernel.h>  /* Needed for KERN_ALERT */
++#include <linux/module.h>  /* Needed by all modules */
++#include <linux/sched.h>
++
++#include <linux/proc_fs.h>
++#include <asm/uaccess.h>
++#include <linux/poll.h>
++#include <linux/highmem.h>
++#include <linux/pagemap.h>
++#include <linux/profile.h>
++
++#include "sysprof-module.h"
++
++#include "config.h"
++
++#include <linux/version.h>
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
++#include <linux/config.h>
++#endif
++
++#if !CONFIG_PROFILING
++# error Sysprof needs a kernel with profiling support compiled in.
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
++# error Sysprof needs a Linux 2.6.11 kernel or later
++#endif
++#include <linux/kallsyms.h>
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Soeren Sandmann (sandmann@daimi.au.dk)");
++
++#define SAMPLES_PER_SECOND (200)
++#define INTERVAL ((HZ <= SAMPLES_PER_SECOND)? 1 : (HZ / SAMPLES_PER_SECOND))
++#define N_TRACES 256
++
++static SysprofStackTrace	stack_traces[N_TRACES];
++static SysprofStackTrace *	head = &stack_traces[0];
++static SysprofStackTrace *	tail = &stack_traces[0];
++DECLARE_WAIT_QUEUE_HEAD (wait_for_trace);
++DECLARE_WAIT_QUEUE_HEAD (wait_for_exit);
++
++/* Macro the names of the registers that are used on each architecture */
++#if defined(CONFIG_X86_64)
++# define REG_FRAME_PTR rbp
++# define REG_INS_PTR rip
++# define REG_STACK_PTR rsp
++#elif defined(CONFIG_X86)
++# define REG_FRAME_PTR ebp
++# define REG_INS_PTR eip
++# define REG_STACK_PTR esp
++#else
++# error Sysprof only supports the i386 and x86-64 architectures
++#endif
++
++typedef struct userspace_reader userspace_reader;
++struct userspace_reader
++{
++	struct task_struct *task;
++	unsigned long cache_address;
++	unsigned long *cache;
++};
++
++typedef struct StackFrame StackFrame;
++struct StackFrame {
++	unsigned long next;
++	unsigned long return_address;
++};
++
++struct work_struct work;
++
++static int
++read_frame (void *frame_pointer, StackFrame *frame)
++{
++#if 0
++	/* This is commented out because we seem to be called with
++	 * (current_thread_info()->addr_limit.seg)) == 0
++	 * which means access_ok() _always_ fails.
++	 *
++	 * Not sure why (or if) this isn't the case for oprofile
++	 */
++	if (!access_ok(VERIFY_READ, frame_pointer, sizeof(StackFrame)))
++		return 1;
++#endif
++
++	if (__copy_from_user_inatomic (
++		    frame, frame_pointer, sizeof (StackFrame)))
++		return 1;
++	
++	return 0;
++}
++
++DEFINE_PER_CPU(int, n_samples);
++
++static int
++timer_notify (struct pt_regs *regs)
++{
++	SysprofStackTrace *trace = head;
++	int i;
++	int is_user;
++	static atomic_t in_timer_notify = ATOMIC_INIT(1);
++	int n;
++
++	n = ++get_cpu_var(n_samples);
++	put_cpu_var(n_samples);
++
++	if (n % INTERVAL != 0)
++		return 0;
++
++	/* 0: locked, 1: unlocked */
++	
++	if (!atomic_dec_and_test(&in_timer_notify))
++		goto out;
++	
++	is_user = user_mode(regs);
++
++	if (!current || current->pid == 0)
++		goto out;
++	
++	if (is_user && current->state != TASK_RUNNING)
++		goto out;
++
++	if (!is_user)
++	{
++		/* kernel */
++		
++		trace->pid = current->pid;
++		trace->truncated = 0;
++		trace->n_addresses = 1;
++
++		/* 0x1 is taken by sysprof to mean "in kernel" */
++		trace->addresses[0] = (void *)0x1;
++	}
++	else
++	{
++		StackFrame *frame_pointer;
++		StackFrame frame;
++		memset(trace, 0, sizeof (SysprofStackTrace));
++		
++		trace->pid = current->pid;
++		trace->truncated = 0;
++
++		i = 0;
++		
++		trace->addresses[i++] = (void *)regs->REG_INS_PTR;
++		
++		frame_pointer = (void *)regs->REG_FRAME_PTR;
++	
++		while (read_frame (frame_pointer, &frame) == 0		&&
++		       i < SYSPROF_MAX_ADDRESSES			&&
++		       (unsigned long)frame_pointer >= regs->REG_STACK_PTR)
++		{
++			trace->addresses[i++] = (void *)frame.return_address;
++			frame_pointer = (StackFrame *)frame.next;
++		}
++		
++		trace->n_addresses = i;
++
++		if (i == SYSPROF_MAX_ADDRESSES)
++			trace->truncated = 1;
++		else
++			trace->truncated = 0;
++	}
++	
++	if (head++ == &stack_traces[N_TRACES - 1])
++		head = &stack_traces[0];
++	
++	wake_up (&wait_for_trace);
++
++out:
++	atomic_inc(&in_timer_notify);
++	return 0;
++}
++
++static int
++procfile_read(char *buffer, 
++	      char **buffer_location, 
++	      off_t offset, 
++	      int buffer_len,
++	      int *eof,
++	      void *data)
++{
++	if (head == tail)
++		return -EWOULDBLOCK;
++	
++	*buffer_location = (char *)tail;
++
++	BUG_ON(tail->pid == 0);
++	
++	if (tail++ == &stack_traces[N_TRACES - 1])
++		tail = &stack_traces[0];
++	
++	return sizeof (SysprofStackTrace);
++}
++
++struct proc_dir_entry *trace_proc_file;
++static unsigned int
++procfile_poll(struct file *filp, poll_table *poll_table)
++{
++	if (head != tail)
++		return POLLIN | POLLRDNORM;
++	
++	poll_wait(filp, &wait_for_trace, poll_table);
++
++	if (head != tail)
++		return POLLIN | POLLRDNORM;
++	
++	return 0;
++}
++
++int
++init_module(void)
++{
++	static struct file_operations fops;
++
++	trace_proc_file =
++		create_proc_entry ("sysprof-trace", S_IFREG | S_IRUGO, &proc_root);
++	
++	if (!trace_proc_file)
++		return 1;
++
++	fops = *trace_proc_file->proc_fops;
++	fops.poll = procfile_poll;
++	
++	trace_proc_file->read_proc = procfile_read;
++	trace_proc_file->proc_fops = &fops;
++	trace_proc_file->size = sizeof (SysprofStackTrace);
++
++	register_timer_hook (timer_notify);
++	
++	printk(KERN_ALERT "sysprof: loaded (%s)\n", PACKAGE_VERSION);
++	
++	return 0;
++}
++
++void
++cleanup_module(void)
++{
++	unregister_timer_hook (timer_notify);
++	
++	remove_proc_entry("sysprof-trace", &proc_root);
++
++	printk(KERN_ALERT "sysprof: unloaded\n");
++}
++
+diff -purN linux_2.6.24_org/drivers/sysprof/sysprof-module.h linux_2.6.24_olpc/drivers/sysprof/sysprof-module.h
+--- linux_2.6.24_org/drivers/sysprof/sysprof-module.h	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/sysprof/sysprof-module.h	2008-02-15 18:58:59.000000000 +0000
+@@ -0,0 +1,37 @@
++/* Sysprof -- Sampling, systemwide CPU profiler
++ * Copyright 2004, Red Hat, Inc.
++ * Copyright 2004, 2005, Soeren Sandmann
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#ifndef SYSPROF_MODULE_H
++#define SYSPROF_MODULE_H
++
++typedef struct SysprofStackTrace SysprofStackTrace;
++
++#define SYSPROF_MAX_ADDRESSES 512
++
++struct SysprofStackTrace
++{
++    int	pid;		/* -1 if in kernel */
++    int truncated;
++    int n_addresses;	/* note: this can be 1 if the process was compiled
++			 * with -fomit-frame-pointer or is otherwise weird
++			 */
++    void *addresses[SYSPROF_MAX_ADDRESSES];
++};
++
++#endif
+diff -purN linux_2.6.24_org/drivers/usb/core/driver.c linux_2.6.24_olpc/drivers/usb/core/driver.c
+--- linux_2.6.24_org/drivers/usb/core/driver.c	2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/core/driver.c	2008-02-15 18:58:14.000000000 +0000
+@@ -1062,8 +1062,15 @@ static int usb_suspend_both(struct usb_d
+ 				break;
+ 		}
+ 	}
+-	if (status == 0)
++	if (status == 0) {
++
++		/* Non-root devices don't need to do anything for FREEZE
++		 * or PRETHAW. */
++		if (udev->parent && (msg.event == PM_EVENT_FREEZE ||
++				msg.event == PM_EVENT_PRETHAW))
++			goto done;
+ 		status = usb_suspend_device(udev, msg);
++	}
+ 
+ 	/* If the suspend failed, resume interfaces that did get suspended */
+ 	if (status != 0) {
+diff -purN linux_2.6.24_org/drivers/usb/core/quirks.c linux_2.6.24_olpc/drivers/usb/core/quirks.c
+--- linux_2.6.24_org/drivers/usb/core/quirks.c	2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/core/quirks.c	2008-02-15 18:58:12.000000000 +0000
+@@ -45,6 +45,9 @@ static const struct usb_device_id usb_qu
+ 	/* SKYMEDI USB_DRIVE */
+ 	{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
+ 
++	/* Philips PSC805 audio device */
++	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
++
+ 	{ }  /* terminating entry must be last */
+ };
+ 
+diff -purN linux_2.6.24_org/drivers/usb/core/usb.h linux_2.6.24_olpc/drivers/usb/core/usb.h
+--- linux_2.6.24_org/drivers/usb/core/usb.h	2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/core/usb.h	2008-02-15 18:58:14.000000000 +0000
+@@ -41,6 +41,7 @@ extern void usb_host_cleanup(void);
+ extern void usb_autosuspend_work(struct work_struct *work);
+ extern int usb_port_suspend(struct usb_device *dev);
+ extern int usb_port_resume(struct usb_device *dev);
++extern int usb_reset_suspended_device(struct usb_device *udev);
+ extern int usb_external_suspend_device(struct usb_device *udev,
+ 		pm_message_t msg);
+ extern int usb_external_resume_device(struct usb_device *udev);
+diff -purN linux_2.6.24_org/drivers/usb/host/ehci-hcd.c linux_2.6.24_olpc/drivers/usb/host/ehci-hcd.c
+--- linux_2.6.24_org/drivers/usb/host/ehci-hcd.c	2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/host/ehci-hcd.c	2008-02-15 18:58:12.000000000 +0000
+@@ -653,9 +653,16 @@ static irqreturn_t ehci_irq (struct usb_
+ 
+ 	/* complete the unlinking of some qh [4.15.2.3] */
+ 	if (status & STS_IAA) {
+-		COUNT (ehci->stats.reclaim);
+-		ehci->reclaim_ready = 1;
+-		bh = 1;
++		if (!ehci->reclaim) {
++			printk(KERN_WARNING "%s would set reclaim_ready with nothing to reclaim!\n", __func__);
++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command));
++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status));
++			WARN_ON(1);
++		} else {
++			COUNT (ehci->stats.reclaim);
++			ehci->reclaim_ready = 1;
++			bh = 1;
++		}
+ 	}
+ 
+ 	/* remote wakeup [4.3.1] */
+diff -purN linux_2.6.24_org/drivers/usb/host/ehci-hub.c linux_2.6.24_olpc/drivers/usb/host/ehci-hub.c
+--- linux_2.6.24_org/drivers/usb/host/ehci-hub.c	2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/host/ehci-hub.c	2008-02-15 18:58:12.000000000 +0000
+@@ -132,10 +132,15 @@ static int ehci_bus_suspend (struct usb_
+ 		ehci_quiesce (ehci);
+ 		hcd->state = HC_STATE_QUIESCING;
+ 	}
++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command));
++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status));
++
+ 	ehci->command = ehci_readl(ehci, &ehci->regs->command);
+ 	if (ehci->reclaim)
+ 		ehci->reclaim_ready = 1;
+ 	ehci_work(ehci);
++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command));
++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status));
+ 
+ 	/* Unlike other USB host controller types, EHCI doesn't have
+ 	 * any notion of "global" or bus-wide suspend.  The driver has
+@@ -175,6 +180,9 @@ static int ehci_bus_suspend (struct usb_
+ 	ehci_halt (ehci);
+ 	hcd->state = HC_STATE_SUSPENDED;
+ 
++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command));
++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status));
++
+ 	/* allow remote wakeup */
+ 	mask = INTR_MASK;
+ 	if (!device_may_wakeup(&hcd->self.root_hub->dev))
+@@ -195,6 +203,18 @@ static int ehci_bus_resume (struct usb_h
+ 	u32			temp;
+ 	u32			power_okay;
+ 	int			i;
++#ifdef CONFIG_OLPC
++	u32 lo;
++	static void __iomem *usb_ehc_addr;
++
++	rdmsrl(0x51200009, lo);
++	usb_ehc_addr = ioremap(lo, 256);
++	writel(readl(usb_ehc_addr+0x54) | 0x1000, usb_ehc_addr+0x54);
++	writel(readl(usb_ehc_addr+0x58) | 0x1000, usb_ehc_addr+0x58);
++	writel(readl(usb_ehc_addr+0x5C) | 0x1000, usb_ehc_addr+0x5C);
++	writel(readl(usb_ehc_addr+0x60) | 0x1000, usb_ehc_addr+0x60);
++	iounmap(usb_ehc_addr);
++#endif
+ 
+ 	if (time_before (jiffies, ehci->next_statechange))
+ 		msleep(5);
+diff -purN linux_2.6.24_org/drivers/usb/host/ehci-pci.c linux_2.6.24_olpc/drivers/usb/host/ehci-pci.c
+--- linux_2.6.24_org/drivers/usb/host/ehci-pci.c	2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/host/ehci-pci.c	2008-02-15 18:58:12.000000000 +0000
+@@ -247,6 +247,9 @@ static int ehci_pci_suspend(struct usb_h
+ 		rc = -EINVAL;
+ 		goto bail;
+ 	}
++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command));
++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status));
++
+ 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+ 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
+ 
+diff -purN linux_2.6.24_org/drivers/usb/host/ehci-q.c linux_2.6.24_olpc/drivers/usb/host/ehci-q.c
+--- linux_2.6.24_org/drivers/usb/host/ehci-q.c	2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/host/ehci-q.c	2008-02-15 18:58:12.000000000 +0000
+@@ -177,7 +177,7 @@ static int qtd_copy_status (
+ 			if (QTD_CERR (token))
+ 				status = -EPIPE;
+ 			else {
+-				ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n",
++				printk(KERN_ERR "devpath %s ep%d%s 3strikes\n",
+ 					urb->dev->devpath,
+ 					usb_pipeendpoint (urb->pipe),
+ 					usb_pipein (urb->pipe) ? "in" : "out");
+@@ -973,6 +973,11 @@ static void end_unlink_async (struct ehc
+ 	struct ehci_qh		*qh = ehci->reclaim;
+ 	struct ehci_qh		*next;
+ 
++	if (!qh) {
++		printk(KERN_CRIT "%s with ehci->reclaim == NULL!\n", __func__);
++		WARN_ON(1);
++		return;
++	}
+ 	timer_action_done (ehci, TIMER_IAA_WATCHDOG);
+ 
+ 	// qh->hw_next = cpu_to_hc32(qh->qh_dma);
+diff -purN linux_2.6.24_org/drivers/usb/host/ohci-pci.c linux_2.6.24_olpc/drivers/usb/host/ohci-pci.c
+--- linux_2.6.24_org/drivers/usb/host/ohci-pci.c	2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/host/ohci-pci.c	2008-02-15 18:58:12.000000000 +0000
+@@ -317,6 +317,8 @@ static int ohci_pci_resume (struct usb_h
+ 	/* FIXME: we should try to detect loss of VBUS power here */
+ 	prepare_for_handover(hcd);
+ 
++	/* Force the PM core to resume the root hub */
++	hcd_to_bus(hcd)->root_hub->dev.power.prev_state.event = PM_EVENT_ON;
+ 	return 0;
+ }
+ 
+diff -purN linux_2.6.24_org/drivers/usb/storage/usb.c linux_2.6.24_olpc/drivers/usb/storage/usb.c
+--- linux_2.6.24_org/drivers/usb/storage/usb.c	2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/storage/usb.c	2008-02-15 18:58:11.000000000 +0000
+@@ -244,7 +244,7 @@ static int storage_pre_reset(struct usb_
+ 	return 0;
+ }
+ 
+-static int storage_post_reset(struct usb_interface *iface)
++static void storage_post_reset(struct usb_interface *iface, int reset_resume)
+ {
+ 	struct us_data *us = usb_get_intfdata(iface);
+ 
+@@ -256,8 +256,10 @@ static int storage_post_reset(struct usb
+ 	/* FIXME: Notify the subdrivers that they need to reinitialize
+ 	 * the device */
+ 
+-	mutex_unlock(&us->dev_mutex);
+-	return 0;
++	/* If this is a reset-resume then the pre_reset routine wasn't
++	 * called, so we don't need to unlock the mutex. */
++	if (!reset_resume)
++		mutex_unlock(&us->dev_mutex);
+ }
+ 
+ /*
+diff -purN linux_2.6.24_org/drivers/video/fbmem.c linux_2.6.24_olpc/drivers/video/fbmem.c
+--- linux_2.6.24_org/drivers/video/fbmem.c	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/fbmem.c	2008-02-15 18:58:42.000000000 +0000
+@@ -820,6 +820,53 @@ static void try_to_load(int fb)
+ #endif /* CONFIG_KMOD */
+ 
+ int
++fb_powerup(struct fb_info *info)
++{
++	int ret = 0;
++
++	if (!info || info->state == FBINFO_STATE_RUNNING)
++		return 0;
++
++	if (info->fbops->fb_powerup)
++		ret = info->fbops->fb_powerup(info);
++
++	if (!ret) {
++		acquire_console_sem();
++		fb_set_suspend(info, 0);
++		release_console_sem();
++	}
++
++	return ret;
++}
++
++int
++fb_powerdown(struct fb_info *info)
++{
++	int ret = 0;
++
++	if (!info || info->state == FBINFO_STATE_SUSPENDED)
++		return 0;
++
++	/* Tell everybody that the fbdev is going down */
++	acquire_console_sem();
++	fb_set_suspend(info, 1);
++	release_console_sem();
++
++	if (info->fbops->fb_powerdown)
++		ret = info->fbops->fb_powerdown(info);
++
++	/* If the power down failed, then un-notify */
++
++	if (ret) {
++		acquire_console_sem();
++		fb_set_suspend(info, 0);
++		release_console_sem();
++	}
++
++	return ret;
++}
++
++int
+ fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
+ {
+ 	struct fb_fix_screeninfo *fix = &info->fix;
+diff -purN linux_2.6.24_org/drivers/video/geode/display_gx.c linux_2.6.24_olpc/drivers/video/geode/display_gx.c
+--- linux_2.6.24_org/drivers/video/geode/display_gx.c	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/display_gx.c	2008-02-15 18:58:41.000000000 +0000
+@@ -11,26 +11,44 @@
+  *   Free Software Foundation; either version 2 of the License, or * (at your
+  *   option) any later version.
+  */
++
++#include <linux/kernel.h>
+ #include <linux/spinlock.h>
+ #include <linux/fb.h>
+ #include <linux/delay.h>
+ #include <asm/io.h>
+ #include <asm/div64.h>
+ #include <asm/delay.h>
++#include <asm/olpc.h>
+ 
+ #include "geodefb.h"
+ #include "display_gx.h"
+ 
+-#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE
+-unsigned int gx_frame_buffer_size(void)
++static inline void rmwl(u32 val, u32 *reg)
+ {
+-	return CONFIG_FB_GEODE_GX_FBSIZE;
++	u32 in = readl(reg);
++	if (in != val)
++		writel(val, reg);
+ }
+-#else
++
+ unsigned int gx_frame_buffer_size(void)
+ {
+ 	unsigned int val;
+ 
++#ifdef CONFIG_OLPC
++	if (machine_is_olpc() && !olpc_has_vsa()) {
++		u32 hi,lo;	
++		rdmsr(GLIU0_P2D_RO0, lo, hi);
++
++		/* Top page number */
++		val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);  
++
++		val -= (lo & 0x000fffff); /* Subtract bottom page number */
++		val += 1;		  /* Adjust page count */
++		return (val << 12);
++	}
++#endif
++
+ 	/* FB size is reported by a virtual register */
+ 	/* Virtual register class = 0x02 */
+ 	/* VG_MEM_SIZE(512Kb units) = 0x00 */
+@@ -41,7 +59,6 @@ unsigned int gx_frame_buffer_size(void)
+ 	val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
+ 	return (val << 19);
+ }
+-#endif
+ 
+ int gx_line_delta(int xres, int bpp)
+ {
+@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info *
+ 	gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
+ 	dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
+ 
+-	/* Disable the timing generator. */
+-	dcfg &= ~(DC_DCFG_TGEN);
+-	writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+-
+-	/* Wait for pending memory requests before disabling the FIFO load. */
+-	udelay(100);
+-
+-	/* Disable FIFO load and compression. */
+-	gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
+-	writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+-
+-	/* Setup DCLK and its divisor. */
+-	par->vid_ops->set_dclk(info);
+-
+-	/*
+-	 * Setup new mode.
+-	 */
++	/* Programming the clock is costly and ugly, so avoid if if we can */
++
++	if (par->curdclk != info->var.pixclock) {
++		/* Disable the timing generator. */
++		dcfg &= ~(DC_DCFG_TGEN);
++		writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
++
++		/* Wait for pending memory requests before disabling the FIFO load. */
++		udelay(100);
++
++		/* Disable FIFO load and compression. */
++		gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
++		writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
++
++		/* Setup DCLK and its divisor. */
++		par->vid_ops->set_dclk(info);
++	}
+ 
+ 	/* Clear all unused feature bits. */
+ 	gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
+@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info *
+ 	gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
+ 
+ 	/* Framebuffer start offset. */
+-	writel(0, par->dc_regs + DC_FB_ST_OFFSET);
++	rmwl(0, par->dc_regs + DC_FB_ST_OFFSET);
+ 
+ 	/* Line delta and line buffer length. */
+-	writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
+-	writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
+-	       par->dc_regs + DC_LINE_SIZE);
++	rmwl(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
++
++	rmwl(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
++	     par->dc_regs + DC_LINE_SIZE);
+ 
+ 
+ 	/* Enable graphics and video data and unmask address lines. */
+@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info *
+ 	vblankend = vsyncend + info->var.upper_margin;
+ 	vtotal = vblankend;
+ 
+-	writel((hactive - 1)     | ((htotal - 1) << 16),    par->dc_regs + DC_H_ACTIVE_TIMING);
+-	writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
+-	writel((hsyncstart - 1)  | ((hsyncend - 1) << 16),  par->dc_regs + DC_H_SYNC_TIMING);
+-
+-	writel((vactive - 1)     | ((vtotal - 1) << 16),    par->dc_regs + DC_V_ACTIVE_TIMING);
+-	writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
+-	writel((vsyncstart - 1)  | ((vsyncend - 1) << 16),  par->dc_regs + DC_V_SYNC_TIMING);
++	rmwl((hactive - 1)     | ((htotal - 1) << 16),    par->dc_regs + DC_H_ACTIVE_TIMING);
++	rmwl((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
++	rmwl((hsyncstart - 1)  | ((hsyncend - 1) << 16),  par->dc_regs + DC_H_SYNC_TIMING);
++	rmwl((vactive - 1)     | ((vtotal - 1) << 16),    par->dc_regs + DC_V_ACTIVE_TIMING);
++	rmwl((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
++	rmwl((vsyncstart - 1)  | ((vsyncend - 1) << 16),  par->dc_regs + DC_V_SYNC_TIMING);
+ 
+ 	/* Write final register values. */
+-	writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+-	writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
++	rmwl(dcfg, par->dc_regs + DC_DISPLAY_CFG);
++	rmwl(gcfg, par->dc_regs + DC_GENERAL_CFG);
+ 
+ 	par->vid_ops->configure_display(info);
+ 
+diff -purN linux_2.6.24_org/drivers/video/geode/display_gx.h linux_2.6.24_olpc/drivers/video/geode/display_gx.h
+--- linux_2.6.24_org/drivers/video/geode/display_gx.h	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/display_gx.h	2008-02-15 18:58:41.000000000 +0000
+@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops;
+ #define GLD_MSR_CONFIG   0xC0002001
+ #define GLD_MSR_CONFIG_DM_FP 0x40
+ 
++/* Used for memory dection on the OLPC */
++#define GLIU0_P2D_RO0 0x10000029
++
+ /* Display controller registers */
+ 
+ #define DC_UNLOCK 0x00
+diff -purN linux_2.6.24_org/drivers/video/geode/geodefb.h linux_2.6.24_olpc/drivers/video/geode/geodefb.h
+--- linux_2.6.24_org/drivers/video/geode/geodefb.h	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/geodefb.h	2008-02-15 18:58:41.000000000 +0000
+@@ -12,6 +12,10 @@
+ #ifndef __GEODEFB_H__
+ #define __GEODEFB_H__
+ 
++#define FB_POWER_STATE_OFF      0
++#define FB_POWER_STATE_SUSPEND  1
++#define FB_POWER_STATE_ON       2
++
+ struct geodefb_info;
+ 
+ struct geode_dc_ops {
+@@ -21,18 +25,24 @@ struct geode_dc_ops {
+ 
+ struct geode_vid_ops {
+ 	void (*set_dclk)(struct fb_info *);
++	unsigned int (*get_dclk)(struct fb_info *);
+ 	void (*configure_display)(struct fb_info *);
+ 	int  (*blank_display)(struct fb_info *, int blank_mode);
+ };
+ 
+ struct geodefb_par {
+ 	int enable_crt;
++	int fbactive;  /* True if the current console is in KD_GRAPHICS mode */
+ 	int panel_x; /* dimensions of an attached flat panel, non-zero => enable panel */
+ 	int panel_y;
++	unsigned int curdclk;  /* Used by GX to avoid unnessesary clock switching */
+ 	void __iomem *dc_regs;
+ 	void __iomem *vid_regs;
++	void __iomem *gp_regs;
+ 	struct geode_dc_ops  *dc_ops;
+ 	struct geode_vid_ops *vid_ops;
++
++	int state;
+ };
+ 
+ #endif /* !__GEODEFB_H__ */
+diff -purN linux_2.6.24_org/drivers/video/geode/geode_regs.h linux_2.6.24_olpc/drivers/video/geode/geode_regs.h
+--- linux_2.6.24_org/drivers/video/geode/geode_regs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/video/geode/geode_regs.h	2008-02-15 18:58:41.000000000 +0000
+@@ -0,0 +1,255 @@
++/* This header file defines the registers and suspend/resume
++   structures for the Geode GX and LX.   The lxfb driver defines
++   _GEODELX_ before including this file, which will unlock the
++   extra registers that are only valid for LX.
++*/
++
++#ifndef _GEODE_REGS_H_
++#define _GEODE_REGS_H_
++
++/* MSRs */
++
++#define GX_VP_MSR_PAD_SELECT    0xC0002011
++#define LX_VP_MSR_PAD_SELECT    0x48000011
++
++#define GEODE_MSR_GLCP_DOTPLL   0x4c000015
++
++#define GLCP_DOTPLL_RESET    (1 << 0)
++#define GLCP_DOTPLL_BYPASS   (1 << 15)
++#define GLCP_DOTPLL_HALFPIX  (1 << 24)
++#define GLCP_DOTPLL_LOCK     (1 << 25)
++
++/* Registers */
++#define VP_FP_START          0x400
++
++
++#ifdef _GEODELX_
++
++#define GP_REG_SIZE  0x7C
++#define DC_REG_SIZE  0xF0
++#define VP_REG_SIZE  0x158
++#define FP_REG_SIZE  0x70
++
++#else
++
++#define GP_REG_SIZE 0x50
++#define DC_REG_SIZE 0x90
++#define VP_REG_SIZE 0x138
++#define FP_REG_SIZE 0x70
++
++#endif
++
++#define DC_PAL_SIZE 0x105
++#define VP_COEFF_COUNT 512
++#define DC_HFILT_SIZE 256
++#define DC_VFILT_SIZE 256
++
++struct geoderegs {
++
++	struct {
++		u64 padsel;
++		u64 dotpll;
++
++#ifdef _GEODELX_
++		u64 dfglcfg;
++		u64 dcspare;
++#else
++		u64 rstpll;
++#endif
++	} msr;
++
++	union {
++		unsigned char b[GP_REG_SIZE];
++		struct {
++			u32 dst_offset;         /* 0x00 */
++			u32 src_offset;         /* 0x04 */
++			u32 stride;             /* 0x08 */
++			u32 wid_height;         /* 0x0C */
++			u32 src_color_fg;       /* 0x10 */
++			u32 src_color_bg;       /* 0x14 */
++			u32 pat_color_0;        /* 0x18 */
++			u32 pat_color_1;        /* 0x1C */
++			u32 pat_color_2;        /* 0x20 */
++			u32 pat_color_3;        /* 0x24 */
++			u32 pat_color_4;        /* 0x28 */
++			u32 pat_color_5;        /* 0x2C */
++			u32 pat_data_0;         /* 0x30 */
++			u32 pat_data_1;         /* 0x34 */
++			u32 raster_mode;        /* 0x38 */
++			u32 vector_mode;        /* 0x3C */
++			u32 blt_mode;           /* 0x40 */
++			u32 blit_status;        /* 0x4C */
++			u32 hst_src;            /* 0x48 */
++			u32 base_offset;        /* 0x4C */
++
++#ifdef _GEODELX_
++			u32 cmd_top;            /* 0x50 */
++			u32 cmd_bot;            /* 0x54 */
++			u32 cmd_read;           /* 0x58 */
++			u32 cmd_write;          /* 0x5C */
++			u32 ch3_offset;         /* 0x60 */
++			u32 ch3_mode_str;       /* 0x64 */
++			u32 ch3_width;          /* 0x68 */
++			u32 ch3_hsrc;           /* 0x6C */
++			u32 lut_index;          /* 0x70 */
++			u32 lut_data;           /* 0x74 */
++			u32 int_cntrl;          /* 0x78 */
++#endif
++		} r;
++	} gp;
++
++	union {
++		unsigned char b[DC_REG_SIZE];
++
++		struct {
++			u32 unlock;             /* 0x00 */
++			u32 gcfg;               /* 0x04 */
++			u32 dcfg;               /* 0x08 */
++			u32 arb;                /* 0x0C */
++			u32 fb_st_offset;       /* 0x10 */
++			u32 cb_st_offset;       /* 0x14 */
++			u32 curs_st_offset;     /* 0x18 */
++			u32 icon_st_offset;     /* 0x1C */
++			u32 vid_y_st_offset;    /* 0x20 */
++			u32 vid_u_st_offset;    /* 0x24 */
++			u32 vid_v_st_offset;    /* 0x28 */
++			u32 dctop;              /* 0x2c */
++			u32 line_size;          /* 0x30 */
++			u32 gfx_pitch;          /* 0x34 */
++			u32 vid_yuv_pitch;      /* 0x38 */
++			u32 rsvd2;              /* 0x3C */
++			u32 h_active_timing;    /* 0x40 */
++			u32 h_blank_timing;     /* 0x44 */
++			u32 h_sync_timing;      /* 0x48 */
++			u32 rsvd3;              /* 0x4C */
++			u32 v_active_timing;    /* 0x50 */
++			u32 v_blank_timing;     /* 0x54 */
++			u32 v_sync_timing;      /* 0x58 */
++			u32 fbactive;           /* 0x5C */
++			u32 dc_cursor_x;        /* 0x60 */
++			u32 dc_cursor_y;        /* 0x64 */
++			u32 dc_icon_x;          /* 0x68 */
++			u32 dc_line_cnt;        /* 0x6C */
++			u32 rsvd5;              /* 0x70 - palette address */
++			u32 rsvd6;              /* 0x74 - palette data */
++			u32 dfifo_diag;         /* 0x78 */
++			u32 cfifo_diag;         /* 0x7C */
++			u32 dc_vid_ds_delta;    /* 0x80 */
++			u32 gliu0_mem_offset;   /* 0x84 */
++			u32 dv_ctl;             /* 0x88 - added by LX */
++			u32 dv_acc;             /* 0x8C */
++
++#ifdef _GEODELX_
++			u32 gfx_scale;
++			u32 irq_filt_ctl;
++			u32 filt_coeff1;
++			u32 filt_coeff2;
++			u32 vbi_event_ctl;
++			u32 vbi_odd_ctl;
++			u32 vbi_hor;
++			u32 vbi_ln_odd;
++			u32 vbi_ln_event;
++			u32 vbi_pitch;
++			u32 clr_key;
++			u32 clr_key_mask;
++			u32 clr_key_x;
++			u32 clr_key_y;
++			u32 irq;
++			u32 rsvd8;
++			u32 genlk_ctrl;
++			u32 vid_even_y_st_offset;    /* 0xD8 */
++			u32 vid_even_u_st_offset;    /* 0xDC */
++			u32 vid_even_v_st_offset;    /* 0xE0 */
++			u32 v_active_even_timing;    /* 0xE4 */
++			u32 v_blank_even_timing;     /* 0xE8 */
++			u32 v_sync_even_timing;      /* 0xEC */
++#endif
++		} r;
++	} dc;
++
++	union {
++		unsigned char b[VP_REG_SIZE];
++
++		struct {
++			u64 vcfg;               /* 0x00 */
++			u64 dcfg;               /* 0x08 */
++			u64 vx;                 /* 0x10 */
++			u64 vy;                 /* 0x18 */
++			u64 vs;                 /* 0x20 */
++			u64 vck;                /* 0x28 */
++			u64 vcm;                /* 0x30 */
++			u64 rsvd1;              /* 0x38 - Gamma address*/
++			u64 rsvd2;              /* 0x40 - Gamma data*/
++			u64 slr;                /* 0x48 - LX only*/
++			u64 misc;               /* 0x50 */
++			u64 ccs;                /* 0x58 */
++			u64 vys;		/* 0x60 */
++			u64 vxs;		/* 0x68 */
++			u64 rsvd4;              /* 0x70 */
++			u64 vdc;                /* 0x78 */
++			u64 vco;                /* 0x80 */
++			u64 crc;                /* 0x88 */
++			u64 crc32;              /* 0x90 */
++			u64 vde;                /* 0x98 */
++			u64 cck;                /* 0xA0 */
++			u64 ccm;                /* 0xA8 */
++			u64 cc1;                /* 0xB0 */
++			u64 cc2;                /* 0xB8 */
++			u64 a1x;                /* 0xC0 */
++			u64 a1y;                /* 0xC8 */
++			u64 a1c;                /* 0xD0 */
++			u64 a1t;                /* 0xD8 */
++			u64 a2x;                /* 0xE0 */
++			u64 a2y;                /* 0xE8 */
++			u64 a2c;                /* 0xF0 */
++			u64 a2t;                /* 0xF8 */
++			u64 a3x;                /* 0x100 */
++			u64 a3y;                /* 0x108 */
++			u64 a3c;                /* 0x110 */
++			u64 a3t;                /* 0x118 */
++			u64 vrr;                /* 0x120 */
++			u64 awt;                /* 0x128 */
++			u64 vtm;                /* 0x130 */
++#ifdef _GEODELX_
++			u64 vye;                /* 0x138 */
++			u64 a1ye;               /* 0x140 */
++			u32 a2ye;               /* 0x148 */
++			u32 a3ye;	        /* 0x150 */
++#endif
++		} r;
++	} vp;
++
++	union {
++		unsigned char b[FP_REG_SIZE];
++
++		struct {
++			u64 pt1;                /* 0x400 */
++			u64 pt2;                /* 0x408 */
++			u64 pm;                 /* 0x410 */
++			u64 dfc;                /* 0x418 */
++			u64 blfsr;              /* 0x420 */
++			u64 rlfsr;              /* 0x428 */
++			u64 fmi;                /* 0x430 */
++			u64 fmd;                /* 0x438 */
++			u64 rsvd;               /* 0x440 */
++			u64 dca;                /* 0x448 */
++			u64 dmd;                /* 0x450 */
++			u64 crc;                /* 0x458 */
++			u64 fbb;                /* 0x460 */
++			u64 crc32;              /* 0x468 */
++		} r;
++	} fp;
++
++	u32 pal[DC_PAL_SIZE];
++	u32 gamma[256];
++
++#ifdef _GEODELX_
++
++	u32 hcoeff[DC_HFILT_SIZE * 2];
++	u32 vcoeff[DC_VFILT_SIZE];
++
++	u32 vp_coeff[VP_COEFF_COUNT];
++#endif
++};
++
++#endif
+diff -purN linux_2.6.24_org/drivers/video/geode/gxfb_core.c linux_2.6.24_olpc/drivers/video/geode/gxfb_core.c
+--- linux_2.6.24_org/drivers/video/geode/gxfb_core.c	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/gxfb_core.c	2008-02-15 18:58:41.000000000 +0000
+@@ -30,12 +30,31 @@
+ #include <linux/fb.h>
+ #include <linux/init.h>
+ #include <linux/pci.h>
++#include <linux/notifier.h>
++#include <linux/vt_kern.h>
++#include <linux/console.h>
++#include <asm/uaccess.h>
++#include <asm/olpc.h>
+ 
+ #include "geodefb.h"
+ #include "display_gx.h"
+ #include "video_gx.h"
+ 
++#define FBIOSGAMMA		_IOW('F', 0x20, void *)
++#define FBIOGGAMMA		_IOW('F', 0x21, void *)
++
++#ifdef DEBUG
++
++#define FBIODUMPGP		_IOW('F', 0x22, void *)
++#define FBIODUMPDC		_IOW('F', 0x23, void *)
++#define FBIODUMPVP		_IOW('F', 0x24, void *)
++#define FBIODUMPFP		_IOW('F', 0x25, void *)
++
++#endif
++
+ static char *mode_option;
++static int noclear;
++struct fb_info *gxfb_info;
+ 
+ /* Modes relevant to the GX (taken from modedb.c) */
+ static const struct fb_videomode gx_modedb[] __initdata = {
+@@ -103,8 +122,20 @@ static const struct fb_videomode gx_mode
+ 	{ NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
+ 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ 	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1200x900-75 - CRT timings for the OLPC mode */
++	{ NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
++	  0, FB_VMODE_NONINTERLACED, 0 }
+ };
+ 
++#ifdef CONFIG_OLPC
++static const struct fb_videomode gx_dcon_modedb[] __initdata = {
++	/* The only mode the DCON has is 1200x900 */
++	{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
++	  0, FB_VMODE_NONINTERLACED, 0 }
++};
++#endif
++
++
+ static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+ {
+ 	if (var->xres > 1600 || var->yres > 1200)
+@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_
+ 	return 0;
+ }
+ 
+-static int gxfb_set_par(struct fb_info *info)
++int gxfb_set_par(struct fb_info *info)
+ {
+ 	struct geodefb_par *par = info->par;
+ 
+@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, st
+ 	return par->vid_ops->blank_display(info, blank_mode);
+ }
+ 
++static int fbsize;
++
+ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
+ {
+ 	struct geodefb_par *par = info->par;
+-	int fb_len;
+ 	int ret;
+ 
+ 	ret = pci_enable_device(dev);
+ 	if (ret < 0)
+ 		return ret;
+ 
++	ret = pci_request_region(dev, 1, "gxfb (graphics processor)");
++	if (ret < 0)
++		return ret;
++
++	par->gp_regs = ioremap(pci_resource_start(dev, 1),
++				pci_resource_len(dev, 1));
++	if (!par->gp_regs)
++		return -ENOMEM;
++
+ 	ret = pci_request_region(dev, 3, "gxfb (video processor)");
+ 	if (ret < 0)
+ 		return ret;
+@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory(
+ 	ret = pci_request_region(dev, 0, "gxfb (framebuffer)");
+ 	if (ret < 0)
+ 		return ret;
+-	if ((fb_len = gx_frame_buffer_size()) < 0)
+-		return -ENOMEM;
++
++	/* If the fbsize wasn't specified then try to probe it */
++
++	if (!fbsize) {
++		fbsize = gx_frame_buffer_size();
++		if (fbsize == 0)
++			return -ENOMEM;
++	}
++
+ 	info->fix.smem_start = pci_resource_start(dev, 0);
+-	info->fix.smem_len = fb_len;
++	info->fix.smem_len = fbsize;
+ 	info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+ 	if (!info->screen_base)
+ 		return -ENOMEM;
+ 
+-	/* Set the 16MB aligned base address of the graphics memory region
++	/* Set the 16MiB aligned base address of the graphics memory region
+ 	 * in the display controller */
+ 
+ 	writel(info->fix.smem_start & 0xFF000000,
+ 			par->dc_regs + DC_GLIU0_MEM_OFFSET);
+ 
+-	dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
++	dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n",
+ 		 info->fix.smem_len / 1024, info->fix.smem_start);
+ 
+ 	return 0;
+ }
+ 
++static int gxfb_ioctl( struct fb_info *info, unsigned int cmd,
++		       unsigned long arg)
++{
++	unsigned int gamma[GXFB_GAMMA_DWORDS];
++	int ret = -EINVAL;
++	struct geodefb_par *par = info->par;
++	int i;
++
++	switch(cmd) {
++	case FBIOSGAMMA:
++		/* Read the gamma information from the user - 256 dwords */
++
++		if (copy_from_user(gamma, (void * __user) arg, GXFB_GAMMA_SIZE))
++			return -EFAULT;
++
++		writel(0, par->vid_regs + GX_GAR);
++
++		/* Sequential writes to the data register will increment the
++		   address automatically  */
++
++		for(i = 0; i < GXFB_GAMMA_DWORDS; i++)
++			writel(gamma[i] & 0xFFFFFF, par->vid_regs + GX_GDR);
++
++		writel(readl(par->vid_regs + GX_MISC) & ~GX_MISC_GAM_EN,
++		       par->vid_regs + GX_MISC);
++
++		ret = 0;
++		break;
++
++	case FBIOGGAMMA:
++		if (readl(par->vid_regs + GX_MISC) & GX_MISC_GAM_EN)
++			return -EINVAL;
++
++		memset(gamma, 0, GXFB_GAMMA_SIZE);
++		writel(0, par->vid_regs + GX_GAR);
++
++		for(i = 0; i < GXFB_GAMMA_DWORDS;i++)
++			gamma[i] = readl(par->vid_regs + GX_GDR);
++
++		if (copy_to_user((void * __user) arg, gamma, GXFB_GAMMA_SIZE))
++			ret = -EFAULT;
++		else
++			ret = 0;
++
++		break;
++
++#ifdef DEBUG
++	case FBIODUMPGP:
++		ret = 0;
++		dump_regs(info, 0);
++		break;
++		
++	case FBIODUMPDC:
++		ret = 0;
++		dump_regs(info, 1);
++		break;
++
++	case FBIODUMPVP:
++		ret = 0;
++		dump_regs(info, 2);
++		break;
++
++	case FBIODUMPFP:
++		ret = 0;
++		dump_regs(info, 3);
++		break;
++#endif
++	}
++
++	return ret;
++}
++
+ static struct fb_ops gxfb_ops = {
+ 	.owner		= THIS_MODULE,
+ 	.fb_check_var	= gxfb_check_var,
+ 	.fb_set_par	= gxfb_set_par,
+ 	.fb_setcolreg	= gxfb_setcolreg,
+ 	.fb_blank       = gxfb_blank,
++	.fb_ioctl       = gxfb_ioctl,
+ 	/* No HW acceleration for now. */
+ 	.fb_fillrect	= cfb_fillrect,
+ 	.fb_copyarea	= cfb_copyarea,
+ 	.fb_imageblit	= cfb_imageblit,
++	.fb_powerdown   = gxfb_powerdown,
++	.fb_powerup     = gxfb_powerup,
+ };
+ 
+ static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
+@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init
+ 	return info;
+ }
+ 
+-static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
++static int gxfb_console_notify(struct notifier_block *self,
++				unsigned long action, void *data)
++{
++	if (gxfb_info != NULL) {
++		struct geodefb_par *par = gxfb_info->par;
++		par->fbactive = (action == CONSOLE_EVENT_SWITCH_TEXT) ? 0 : 1;
++	}
++
++	return NOTIFY_OK;
++}
++
++static struct notifier_block gxfb_console_notifier = {
++	.notifier_call = gxfb_console_notify
++};
++
++#ifdef CONFIG_PM
++
++static int gxfb_suspend(struct pci_dev *pdev,  pm_message_t state)
++{
++	struct fb_info *info = pci_get_drvdata(pdev);
++	struct geodefb_par *par = info->par;
++
++	if (pdev->dev.power.power_state.event == state.event)
++		return 0;
++
++	if (state.event == PM_EVENT_SUSPEND) {
++	 
++		acquire_console_sem();
++		gxfb_powerdown(info);
++
++		par->state = FB_POWER_STATE_OFF;
++		fb_set_suspend(info, 1);
++		
++		release_console_sem();
++	}
++
++	pdev->dev.power.power_state = state;
++	return 0;
++}
++
++static int gxfb_resume(struct pci_dev *pdev)
++{
++	struct fb_info *info = pci_get_drvdata(pdev);
++
++	acquire_console_sem();
++	
++	/* Turn the engine completely on */
++
++	if (gxfb_powerup(info))
++	  printk(KERN_ERR "gxfb:  Powerup failed\n");
++
++	fb_set_suspend(info, 0);
++	release_console_sem();
++
++	pdev->dev.power.power_state = PMSG_ON;
++        return 0;
++}
++#endif
++
++static int __init gxfb_probe(struct pci_dev *pdev,
++			     const struct pci_device_id *id)
+ {
+ 	struct geodefb_par *par;
+-	struct fb_info *info;
+ 	int ret;
+ 	unsigned long val;
+ 
+-	info = gxfb_init_fbinfo(&pdev->dev);
+-	if (!info)
++	struct fb_videomode *modedb_ptr;
++	int modedb_size;
++
++	gxfb_info = gxfb_init_fbinfo(&pdev->dev);
++	if (gxfb_info == NULL)
+ 		return -ENOMEM;
+-	par = info->par;
++
++	par = gxfb_info->par;
+ 
+ 	/* GX display controller and GX video device. */
+ 	par->dc_ops  = &gx_dc_ops;
+ 	par->vid_ops = &gx_vid_ops;
+ 
+-	if ((ret = gxfb_map_video_memory(info, pdev)) < 0) {
++	if ((ret = gxfb_map_video_memory(gxfb_info, pdev)) < 0) {
+ 		dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n");
+ 		goto err;
+ 	}
+@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_
+ 	else
+ 		par->enable_crt = 1;
+ 
+-	ret = fb_find_mode(&info->var, info, mode_option,
+-			   gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16);
++	/* Get the current dotclock */
++
++	par->curdclk = (par->vid_ops->get_dclk) ? par->vid_ops->get_dclk(gxfb_info) : 0;
++
++	/* We need to determine a display mode right now, so we will
++	 * check to see if the DCON was previously detected by the BIOS
++	 * and use that to make our mode database decision.
++	 */
++
++	modedb_ptr = (struct fb_videomode *) gx_modedb;
++	modedb_size = ARRAY_SIZE(gx_modedb);
++
++#ifdef CONFIG_OLPC
++	if (olpc_has_dcon()) {
++		modedb_ptr = (struct fb_videomode *) gx_dcon_modedb;
++		modedb_size = ARRAY_SIZE(gx_dcon_modedb);
++	}
++#endif
++
++	ret = fb_find_mode(&gxfb_info->var, gxfb_info, mode_option,
++			   modedb_ptr, modedb_size, NULL, 16);
++
+ 	if (ret == 0 || ret == 4) {
+ 		dev_err(&pdev->dev, "could not find valid video mode\n");
+ 		ret = -EINVAL;
+ 		goto err;
+ 	}
+ 
++	/* Clear the screen of garbage, unless noclear was specified,
++	 * in which case we assume the user knows what he is doing */
++
++	if (!noclear)
++		memset_io(gxfb_info->screen_base, 0, gxfb_info->fix.smem_len);
++
++	gxfb_check_var(&gxfb_info->var, gxfb_info);
++	gxfb_set_par(gxfb_info);
++
++	/* We are powered up */
++	par->state = FB_POWER_STATE_ON;
+ 
+-	/* Clear the frame buffer of garbage. */
+-        memset_io(info->screen_base, 0, info->fix.smem_len);
+ 
+-	gxfb_check_var(&info->var, info);
+-	gxfb_set_par(info);
++	console_event_register(&gxfb_console_notifier);
+ 
+-	if (register_framebuffer(info) < 0) {
++	if (register_framebuffer(gxfb_info) < 0) {
+ 		ret = -EINVAL;
+ 		goto err;
+ 	}
+-	pci_set_drvdata(pdev, info);
+-	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
++	pci_set_drvdata(pdev, gxfb_info);
++	printk(KERN_INFO "fb%d: %s frame buffer device\n", gxfb_info->node, gxfb_info->fix.id);
+ 	return 0;
+ 
+   err:
+-	if (info->screen_base) {
+-		iounmap(info->screen_base);
++	if (gxfb_info->screen_base) {
++		iounmap(gxfb_info->screen_base);
+ 		pci_release_region(pdev, 0);
+ 	}
+ 	if (par->vid_regs) {
+@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_
+ 		pci_release_region(pdev, 2);
+ 	}
+ 
+-	if (info)
+-		framebuffer_release(info);
++	if (gxfb_info)
++		framebuffer_release(gxfb_info);
++
+ 	return ret;
+ }
+ 
+@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev *
+ }
+ 
+ static struct pci_device_id gxfb_id_table[] = {
+-	{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO,
+-	  PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
+-	  0xff0000, 0 },
++	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO) },
+ 	{ 0, }
+ };
+ 
+@@ -410,22 +623,30 @@ static struct pci_driver gxfb_driver = {
+ 	.id_table	= gxfb_id_table,
+ 	.probe		= gxfb_probe,
+ 	.remove		= gxfb_remove,
++#ifdef CONFIG_PM
++	.suspend        = gxfb_suspend,
++	.resume         = gxfb_resume
++#endif
+ };
+ 
+ #ifndef MODULE
+-static int __init gxfb_setup(char *options)
+-{
++static int __init gxfb_setup(char *options) {
+ 
+ 	char *opt;
+ 
+ 	if (!options || !*options)
+ 		return 0;
+ 
+-	while ((opt = strsep(&options, ",")) != NULL) {
++	while((opt = strsep(&options, ",")) != NULL) {
+ 		if (!*opt)
+ 			continue;
+ 
+-		mode_option = opt;
++		if (!strncmp(opt, "fbsize:", 7))
++			fbsize = simple_strtoul(opt+7, NULL, 0);
++		else if (!strcmp(opt, "noclear"))
++			noclear = 1;
++		else
++			mode_option = opt;
+ 	}
+ 
+ 	return 0;
+@@ -444,7 +665,6 @@ static int __init gxfb_init(void)
+ #endif
+ 	return pci_register_driver(&gxfb_driver);
+ }
+-
+ static void __exit gxfb_cleanup(void)
+ {
+ 	pci_unregister_driver(&gxfb_driver);
+@@ -456,5 +676,8 @@ module_exit(gxfb_cleanup);
+ module_param(mode_option, charp, 0);
+ MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])");
+ 
++module_param(fbsize, int, 0);
++MODULE_PARM_DESC(fbsize, "video memory size");
++
+ MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
+ MODULE_LICENSE("GPL");
+diff -purN linux_2.6.24_org/drivers/video/geode/Kconfig linux_2.6.24_olpc/drivers/video/geode/Kconfig
+--- linux_2.6.24_org/drivers/video/geode/Kconfig	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/Kconfig	2008-02-15 18:58:41.000000000 +0000
+@@ -38,26 +38,6 @@ config FB_GEODE_GX
+ 
+ 	  If unsure, say N.
+ 
+-config FB_GEODE_GX_SET_FBSIZE
+-	bool "Manually specify the Geode GX framebuffer size"
+-	depends on FB_GEODE_GX
+-	default n
+-	---help---
+-	  If you want to manually specify the size of your GX framebuffer,
+-	  say Y here, otherwise say N to dynamically probe it.
+-
+-	  Say N unless you know what you are doing.
+-
+-config FB_GEODE_GX_FBSIZE
+-	hex "Size of the GX framebuffer, in bytes"
+-	depends on FB_GEODE_GX_SET_FBSIZE
+-	default "0x1600000"
+-	---help---
+-	  Specify the size of the GX framebuffer.  Normally, you will
+-	  want this to be MB aligned.  Common values are 0x80000 (8MB)
+-	  and 0x1600000 (16MB).  Don't change this unless you know what
+-	  you are doing
+-
+ config FB_GEODE_GX1
+ 	tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)"
+ 	depends on FB && FB_GEODE && EXPERIMENTAL
+diff -purN linux_2.6.24_org/drivers/video/geode/lxfb_core.c linux_2.6.24_olpc/drivers/video/geode/lxfb_core.c
+--- linux_2.6.24_org/drivers/video/geode/lxfb_core.c	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/lxfb_core.c	2008-02-15 18:58:41.000000000 +0000
+@@ -21,7 +21,8 @@
+ #include <linux/fb.h>
+ #include <linux/init.h>
+ #include <linux/pci.h>
+-#include <linux/uaccess.h>
++#include <asm/uaccess.h>
++#include <asm/olpc.h>
+ 
+ #include "lxfb.h"
+ 
+@@ -35,186 +36,84 @@ static int fbsize;
+  */
+ 
+ const struct fb_videomode geode_modedb[] __initdata = {
+-	/* 640x480-60 */
+-	{ NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
++	/* 640x480-60 VESA */
++	{ NULL, 60, 640, 480, 39682,  48, 16, 33, 10, 96, 2,
++	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 640x480-75 VESA */
++	{ NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3,
++	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 640x480-85 VESA */
++	{ NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3,
++	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 800x600-60 VESA */
++	{ NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4,
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 800x600-75 VESA */
++	{ NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3,
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 800x600-85 VESA */
++	{ NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3,
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1024x768-60 VESA */
++	{ NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6,
++	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1024x768-75 VESA */
++	{ NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3,
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1024x768-85 VESA */
++	{ NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3,
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1280x960-60 VESA */
++	{ NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3,
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1280x960-85 VESA */
++	{ NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3,
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1280x1024-60 VESA */
++	{ NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3,
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1280x1024-75 VESA */
++	{ NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3,
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1280x1024-85 VESA */
++	{ NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3,
+ 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 640x400-70 */
+-	{ NULL, 70, 640, 400, 39770, 40, 8, 28, 5, 96, 2,
+-	  FB_SYNC_HOR_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 640x480-70 */
+-	{ NULL, 70, 640, 480, 35014, 88, 24, 15, 2, 64, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 640x480-72 */
+-	{ NULL, 72, 640, 480, 32102, 120, 16, 20, 1, 40, 3,
+-	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 640x480-75 */
+-	{ NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3,
+-	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 640x480-85 */
+-	{ NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3,
+-	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 640x480-90 */
+-	{ NULL, 90, 640, 480, 26392, 96, 32, 22, 1, 64, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 640x480-100 */
+-	{ NULL, 100, 640, 480, 23167, 104, 40, 25, 1, 64, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 640x480-60 */
+-	{ NULL, 60, 640, 480, 39682, 48, 16, 25, 10, 88, 2,
+-	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 800x600-56 */
+-	{ NULL, 56, 800, 600, 27901, 128, 24, 22, 1, 72, 2,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 800x600-60 */
+-	{ NULL, 60, 800, 600, 25131, 72, 32, 23, 1, 136, 4,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 800x600-70 */
+-	{ NULL, 70, 800, 600, 21873, 120, 40, 21, 4, 80, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 800x600-72 */
+-	{ NULL, 72, 800, 600, 20052, 64, 56, 23, 37, 120, 6,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 800x600-75 */
+-	{ NULL, 75, 800, 600, 20202, 160, 16, 21, 1, 80, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 800x600-85 */
+-	{ NULL, 85, 800, 600, 17790, 152, 32, 27, 1, 64, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 800x600-90 */
+-	{ NULL, 90, 800, 600, 16648, 128, 40, 28, 1, 88, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 800x600-100 */
+-	{ NULL, 100, 800, 600, 14667, 136, 48, 27, 1, 88, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 800x600-60 */
+-	{ NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4,
+-	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 1024x768-60 */
+-	{ NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
+-	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 1024x768-70 */
+-	{ NULL, 70, 1024, 768, 13346, 144, 24, 29, 3, 136, 6,
+-	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 1024x768-72 */
+-	{ NULL, 72, 1024, 768, 12702, 168, 56, 29, 4, 112, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1024x768-75 */
+-	{ NULL, 75, 1024, 768, 12703, 176, 16, 28, 1, 96, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1024x768-85 */
+-	{ NULL, 85, 1024, 768, 10581, 208, 48, 36, 1, 96, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1024x768-90 */
+-	{ NULL, 90, 1024, 768, 9981, 176, 64, 37, 1, 112, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1024x768-100 */
+-	{ NULL, 100, 1024, 768, 8825, 184, 72, 42, 1, 112, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1024x768-60 */
+-	{ NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
+-	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 1152x864-60 */
+-	{ NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1152x864-70 */
+-	{ NULL, 70, 1152, 864, 10254, 192, 72, 32, 8, 120, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1152x864-72 */
+-	{ NULL, 72, 1152, 864, 9866, 200, 72, 33, 7, 128, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1152x864-75 */
+-	{ NULL, 75, 1152, 864, 9259, 256, 64, 32, 1, 128, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1152x864-85 */
+-	{ NULL, 85, 1152, 864, 8357, 200, 72, 37, 3, 128, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1152x864-90 */
+-	{ NULL, 90, 1152, 864, 7719, 208, 80, 42, 9, 128, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1152x864-100 */
+-	{ NULL, 100, 1152, 864, 6947, 208, 80, 48, 3, 128, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1152x864-60 */
+-	{ NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
+-	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 1280x1024-60 */
+-	{ NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1280x1024-70 */
+-	{ NULL, 70, 1280, 1024, 7719, 224, 88, 38, 6, 136, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1280x1024-72 */
+-	{ NULL, 72, 1280, 1024, 7490, 224, 88, 39, 7, 136, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1280x1024-75 */
+-	{ NULL, 75, 1280, 1024, 7409, 248, 16, 38, 1, 144, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1280x1024-85 */
+-	{ NULL, 85, 1280, 1024, 6351, 224, 64, 44, 1, 160, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1280x1024-90 */
+-	{ NULL, 90, 1280, 1024, 5791, 240, 96, 51, 12, 144, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1280x1024-100 */
+-	{ NULL, 100, 1280, 1024, 5212, 240, 96, 57, 6, 144, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1280x1024-60 */
+-	{ NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
+-	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 1600x1200-60 */
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1600x1200-60 VESA */
+ 	{ NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1600x1200-70 */
+-	{ NULL, 70, 1600, 1200, 5291, 304, 64, 46, 1, 192, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1600x1200-72 */
+-	{ NULL, 72, 1600, 1200, 5053, 288, 112, 47, 13, 176, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1600x1200-75 */
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1600x1200-75 VESA */
+ 	{ NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1600x1200-85 */
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1600x1200-85 VESA */
+ 	{ NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1600x1200-90 */
+-	{ NULL, 90, 1600, 1200, 3981, 304, 128, 60, 1, 176, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1600x1200-100 */
+-	{ NULL, 100, 1600, 1200, 3563, 304, 128, 67, 1, 176, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1600x1200-60 */
+-	{ NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
+ 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+-	  FB_VMODE_NONINTERLACED, 0 },
+-	/* 1920x1440-60 */
+-	{ NULL, 60, 1920, 1440, 4273, 344, 128, 56, 1, 208, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1920x1440-70 */
+-	{ NULL, 70, 1920, 1440, 3593, 360, 152, 55, 8, 208, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1920x1440-72 */
+-	{ NULL, 72, 1920, 1440, 3472, 360, 152, 68, 4, 208, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1920x1440-75 */
+-	{ NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
+-	/* 1920x1440-85 */
+-	{ NULL, 85, 1920, 1440, 2929, 368, 152, 68, 1, 216, 3,
+-	  0, FB_VMODE_NONINTERLACED, 0 },
++	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++	/* 1200x900-75 - CRT timings for the OLPC mode */
++	{ NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
++	  0, FB_VMODE_NONINTERLACED, 0 }
+ };
+ 
++#ifdef CONFIG_OLPC
++const struct fb_videomode olpc_dcon_modedb[] __initdata = {
++	/* The only mode the DCON has is 1200x900 */
++	{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
++	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++	  FB_VMODE_NONINTERLACED, 0 }
++};
++#endif
++
+ static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+ {
+ 	if (var->xres > 1920 || var->yres > 1440)
+@@ -255,8 +154,7 @@ static int lxfb_set_par(struct fb_info *
+ 		fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0);
+ 	}
+ 
+-	info->fix.line_length = lx_get_pitch(info->var.xres,
+-		info->var.bits_per_pixel);
++	info->fix.line_length = lx_get_pitch(info->var.xres, info->var.bits_per_pixel);
+ 
+ 	lx_set_mode(info);
+ 	return 0;
+@@ -371,24 +269,61 @@ static int __init lxfb_map_video_memory(
+ 	writel(info->fix.smem_start & 0xFF000000,
+ 	       par->dc_regs + DC_PHY_MEM_OFFSET);
+ 
+-	writel(0, par->dc_regs + DC_UNLOCK);
+-
+ 	dev_info(&dev->dev, "%d KB of video memory at 0x%lx\n",
+ 		 info->fix.smem_len / 1024, info->fix.smem_start);
+ 
+ 	return 0;
+ }
+ 
++static int lxfb_set_gamma(struct fb_info *info, void * __user data)
++{
++	unsigned int gamma[LXFB_GAMMA_DWORDS];
++
++	if (copy_from_user(gamma, data, LXFB_GAMMA_SIZE))
++		return -EFAULT;
++
++	lx_set_gamma(info, gamma, LXFB_GAMMA_SIZE);
++	return 0;
++}
++
++static int lxfb_get_gamma(struct fb_info *info, void * __user data)
++{
++	unsigned int gamma[LXFB_GAMMA_DWORDS];
++	memset(gamma, 0, sizeof(gamma));
++
++	lx_get_gamma(info, gamma, LXFB_GAMMA_DWORDS);
++
++	return copy_to_user(data, gamma, LXFB_GAMMA_SIZE) ?
++		-EFAULT : 0;
++}
++
++static int lxfb_ioctl( struct fb_info *info, unsigned int cmd,
++		       unsigned long arg)
++{
++	switch(cmd) {
++	case FBIOSGAMMA:
++		return lxfb_set_gamma(info, (void * __user) arg);
++
++	case FBIOGGAMMA:
++		return lxfb_get_gamma(info, (void * __user) arg);
++	}
++
++	return -ENOTTY;
++}
++
+ static struct fb_ops lxfb_ops = {
+ 	.owner		= THIS_MODULE,
+ 	.fb_check_var	= lxfb_check_var,
+ 	.fb_set_par	= lxfb_set_par,
+ 	.fb_setcolreg	= lxfb_setcolreg,
+ 	.fb_blank       = lxfb_blank,
++	.fb_ioctl       = lxfb_ioctl,
+ 	/* No HW acceleration for now. */
+ 	.fb_fillrect	= cfb_fillrect,
+ 	.fb_copyarea	= cfb_copyarea,
+ 	.fb_imageblit	= cfb_imageblit,
++	.fb_powerdown	= lx_shutdown,
++	.fb_powerup	= lx_powerup,
+ };
+ 
+ static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
+@@ -431,6 +366,45 @@ static struct fb_info * __init lxfb_init
+ 	return info;
+ }
+ 
++#ifdef CONFIG_PM
++
++static int lxfb_suspend(struct pci_dev *pdev,  pm_message_t state)
++{
++	struct fb_info *info = pci_get_drvdata(pdev);
++
++	if (pdev->dev.power.power_state.event == state.event)
++		return 0;
++
++	if (state.event == PM_EVENT_SUSPEND) {
++
++		acquire_console_sem();
++		lx_shutdown(info);
++		fb_set_suspend(info, 1);
++		release_console_sem();
++	}
++
++	pdev->dev.power.power_state = state;
++	return 0;
++}
++
++static int lxfb_resume(struct pci_dev *pdev)
++{
++	struct fb_info *info = pci_get_drvdata(pdev);
++
++	acquire_console_sem();
++
++	/* Turn the engine completely on */
++
++	lx_powerup(info);
++	fb_set_suspend(info, 0);
++	release_console_sem();
++
++	pdev->dev.power.power_state = PMSG_ON;
++        return 0;
++}
++
++#endif
++
+ static int __init lxfb_probe(struct pci_dev *pdev,
+ 			     const struct pci_device_id *id)
+ {
+@@ -467,6 +441,13 @@ static int __init lxfb_probe(struct pci_
+ 	modedb_ptr = (struct fb_videomode *) geode_modedb;
+ 	modedb_size = ARRAY_SIZE(geode_modedb);
+ 
++#ifdef CONFIG_OLPC
++	if (olpc_has_dcon()) {
++		modedb_ptr = (struct fb_videomode *) olpc_dcon_modedb;
++		modedb_size = ARRAY_SIZE(olpc_dcon_modedb);
++	}
++#endif
++
+ 	ret = fb_find_mode(&info->var, info, mode_option,
+ 			   modedb_ptr, modedb_size, NULL, 16);
+ 
+@@ -556,6 +537,10 @@ static struct pci_driver lxfb_driver = {
+ 	.id_table	= lxfb_id_table,
+ 	.probe		= lxfb_probe,
+ 	.remove		= lxfb_remove,
++#ifdef CONFIG_PM
++	.suspend        = lxfb_suspend,
++	.resume         = lxfb_resume
++#endif
+ };
+ 
+ #ifndef MODULE
+diff -purN linux_2.6.24_org/drivers/video/geode/lxfb.h linux_2.6.24_olpc/drivers/video/geode/lxfb.h
+--- linux_2.6.24_org/drivers/video/geode/lxfb.h	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/lxfb.h	2008-02-15 18:58:41.000000000 +0000
+@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *);
+ void lx_get_gamma(struct fb_info *, unsigned int *, int);
+ void lx_set_gamma(struct fb_info *, unsigned int *, int);
+ unsigned int lx_framebuffer_size(void);
++int lx_shutdown(struct fb_info *);
++int lx_powerup(struct fb_info *);
+ int lx_blank_display(struct fb_info *, int);
+ void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
+ 			unsigned int, unsigned int);
+ 
++
++
++/* ioctl() defines */
++
++#define FBIOSGAMMA              _IOW('F', 0x20, void *)
++#define FBIOGGAMMA              _IOW('F', 0x21, void *)
++
++/* General definitions */
++#define LXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
++#define LXFB_GAMMA_SIZE (LXFB_GAMMA_DWORDS * sizeof(unsigned int))
++
+ /* MSRS */
+ 
+ #define MSR_LX_GLD_CONFIG    0x48002001
+@@ -127,7 +140,7 @@ void lx_set_palette_reg(struct fb_info *
+ 
+ #define DC_GFX_SCALE       0x90
+ #define DC_IRQ_FILT_CTL    0x94
+-
++#define DC_IRQFILT_H_FILT_SEL              0x00000400
+ 
+ #define DC_IRQ               0xC8
+ #define  DC_IRQ_MASK         (1 << 0)
+diff -purN linux_2.6.24_org/drivers/video/geode/lxfb_ops.c linux_2.6.24_olpc/drivers/video/geode/lxfb_ops.c
+--- linux_2.6.24_org/drivers/video/geode/lxfb_ops.c	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/lxfb_ops.c	2008-02-15 18:58:41.000000000 +0000
+@@ -11,11 +11,15 @@
+ #include <linux/kernel.h>
+ #include <linux/errno.h>
+ #include <linux/fb.h>
+-#include <linux/uaccess.h>
+-#include <linux/delay.h>
++#include <asm/uaccess.h>
++#include <asm/delay.h>
++#include <asm/olpc.h>
+ 
+ #include "lxfb.h"
+ 
++#define _GEODELX_
++#include "geode_regs.h"
++
+ /* TODO
+  * Support panel scaling
+  * Add acceleration
+@@ -290,6 +294,19 @@ unsigned int lx_framebuffer_size(void)
+ {
+ 	unsigned int val;
+ 
++#ifdef CONFIG_OLPC
++	 if (machine_is_olpc() && !olpc_has_vsa()) {
++		u32 hi,lo;
++		rdmsr(MSR_LX_GLIU0_P2D_RO0, lo, hi);
++
++		/* Top page number */
++		val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
++		val -= (lo & 0x000fffff); /* Subtract bottom page number */
++		val += 1;                 /* Adjust page count */
++		return (val << 12);
++	}
++#endif
++
+ 	/* The frame buffer size is reported by a VSM in VSA II */
+ 	/* Virtual Register Class    = 0x02                     */
+ 	/* VG_MEM_SIZE (1MB units)   = 0x00                     */
+@@ -301,6 +318,34 @@ unsigned int lx_framebuffer_size(void)
+ 	return (val << 20);
+ }
+ 
++void lx_set_gamma(struct fb_info *info, unsigned int *gamma, int len)
++{
++	int i;
++	struct lxfb_par *par = info->par;
++
++	writel(0, par->df_regs + DF_PAR);
++
++	/* Sequential writes to the data register will increment the
++	   address automatically  */
++
++	for(i = 0; i < len; i++)
++		writel(gamma[i] & 0xFFFFFF, par->df_regs + DF_PDR);
++
++	writel(readl(par->df_regs + DF_MISC) & ~DF_MISC_GAM_BYPASS,
++	       par->df_regs + DF_MISC);
++}
++
++void lx_get_gamma(struct fb_info *info, unsigned int *gamma, int len)
++{
++	int i;
++	struct lxfb_par *par = info->par;
++
++	writel(0, par->df_regs + DF_PAR);
++
++	for(i = 0; i < len;i++)
++		gamma[i] = readl(par->df_regs + DF_PDR);
++}
++
+ void lx_set_mode(struct fb_info *info)
+ {
+ 	struct lxfb_par *par = info->par;
+@@ -313,6 +358,7 @@ void lx_set_mode(struct fb_info *info)
+ 	int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
+ 
+ 	/* Unlock the DC registers */
++	readl(par->dc_regs + DC_UNLOCK);
+ 	writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
+ 
+ 	lx_graphics_disable(info);
+@@ -483,54 +529,408 @@ void lx_set_palette_reg(struct fb_info *
+ 	writel(val, par->dc_regs + DC_PAL_DATA);
+ }
+ 
++static int lx_blank_mode = FB_BLANK_UNBLANK;
++
+ int lx_blank_display(struct fb_info *info, int blank_mode)
+ {
+ 	struct lxfb_par *par = info->par;
+-	u32 dcfg, fp_pm;
+-	int blank, hsync, vsync;
++	u32 dcfg, val;
++
++	if (blank_mode == lx_blank_mode)
++		return 0;
++
++	writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
++
++	if (lx_blank_mode == FB_BLANK_POWERDOWN) {
++		val = readl(par->df_regs + DF_FP_PM);
++		writel(val | DF_FP_PM_P, par->df_regs + DF_FP_PM);
++		val = readl(par->df_regs + DF_MISC) & ~DF_MISC_DAC_PWRDN;
++		writel(val, par->df_regs + DF_MISC);
++
++		val = readl(par->dc_regs + DC_GENERAL_CFG) | DC_GCFG_DFLE;
++		writel(val, par->dc_regs + DC_GENERAL_CFG);
++
++		val = readl(par->dc_regs + DC_DISPLAY_CFG) | DC_DCFG_TGEN;
++		writel(val, par->dc_regs + DC_DISPLAY_CFG);
++	}
++
++	dcfg = readl(par->df_regs + DF_DISPLAY_CFG);
+ 
+ 	/* CRT power saving modes. */
+ 	switch (blank_mode) {
+ 	case FB_BLANK_UNBLANK:
+-		blank = 0; hsync = 1; vsync = 1;
++		dcfg |= DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN;
++		dcfg |= DF_DCFG_DAC_BL_EN;
+ 		break;
+ 	case FB_BLANK_NORMAL:
+-		blank = 1; hsync = 1; vsync = 1;
++		dcfg |= DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN;
++		dcfg |= DF_DCFG_DAC_BL_EN;
+ 		break;
+ 	case FB_BLANK_VSYNC_SUSPEND:
+-		blank = 1; hsync = 1; vsync = 0;
++		dcfg |= DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_DAC_BL_EN;
++		dcfg &= ~DF_DCFG_VSYNC_EN;
+ 		break;
+ 	case FB_BLANK_HSYNC_SUSPEND:
+-		blank = 1; hsync = 0; vsync = 1;
++		dcfg |= DF_DCFG_CRT_EN | DF_DCFG_VSYNC_EN | DF_DCFG_DAC_BL_EN;
++		dcfg &= ~DF_DCFG_HSYNC_EN;
+ 		break;
+ 	case FB_BLANK_POWERDOWN:
+-		blank = 1; hsync = 0; vsync = 0;
++		dcfg &= ~DF_DCFG_DAC_BL_EN;
++		dcfg &= ~(DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN);
+ 		break;
+ 	default:
++		writel(0, par->dc_regs + DC_UNLOCK);
+ 		return -EINVAL;
+ 	}
+ 
+-	dcfg = readl(par->df_regs + DF_DISPLAY_CFG);
+-	dcfg &= ~(DF_DCFG_DAC_BL_EN
+-		  | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN);
+-	if (!blank)
+-		dcfg |= DF_DCFG_DAC_BL_EN;
+-	if (hsync)
+-		dcfg |= DF_DCFG_HSYNC_EN;
+-	if (vsync)
+-		dcfg |= DF_DCFG_VSYNC_EN;
+-	writel(dcfg, par->df_regs + DF_DISPLAY_CFG);
++	/* Turn off the engine when we are in power down mode */
++	if (blank_mode == FB_BLANK_POWERDOWN) {
++		val = readl(par->df_regs + DF_MISC) | DF_MISC_DAC_PWRDN;
++		writel(val, par->df_regs + DF_MISC);
++
++		val = readl(par->dc_regs + DC_DISPLAY_CFG);
++		val &= ~DC_DCFG_TGEN;
++		writel(val, par->dc_regs + DC_DISPLAY_CFG);
++
++		udelay(1000);
++
++		val = readl(par->dc_regs + DC_GENERAL_CFG) & ~DC_GCFG_DFLE;
++		writel(val, par->dc_regs + DC_GENERAL_CFG);
++
++		val = readl(par->df_regs + DF_FP_PM);
++		writel(val & ~DF_FP_PM_P, par->df_regs + DF_FP_PM);
++	}
+ 
++	writel(0, par->dc_regs + DC_UNLOCK);
++
++	lx_blank_mode = blank_mode;
++	return 0;
++}
++
++static struct geoderegs saved_regs;
++
++static void lx_save_regs(struct fb_info *info, struct geoderegs *regs)
++{
++	struct lxfb_par *par = info->par;
++	int i;
++	u32 filt;
++
++	/* Wait for the command buffer to empty */
++	while(!(readl(par->gp_regs + 0x44) & (1 << 4)));
++
++	/* Unlock the DC */
++	writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
++
++	rdmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
++	rdmsrl(MSR_LX_GLCP_DOTPLL, regs->msr.dotpll);
++	rdmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
++	rdmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
++
++	writel(0x4758, par->dc_regs + 0x00);
++
++	memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
++	memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
++	memcpy(regs->vp.b, par->df_regs, VP_REG_SIZE);
++	memcpy(regs->fp.b, par->df_regs + VP_FP_START, FP_REG_SIZE);
++
++	/* Save the palette */
++	writel(0, par->dc_regs + 0x70);
+ 	/* Power on/off flat panel */
++	for(i = 0; i < DC_PAL_SIZE; i++)
++		regs->pal[i] = readl(par->dc_regs + 0x74);
+ 
+-	if (par->output & OUTPUT_PANEL) {
+-		fp_pm = readl(par->df_regs + DF_FP_PM);
+-		if (blank_mode == FB_BLANK_POWERDOWN)
+-			fp_pm &= ~DF_FP_PM_P;
+-		else
+-			fp_pm |= DF_FP_PM_P;
+-		writel(fp_pm, par->df_regs + DF_FP_PM);
++	/* save the filter coefficients */
++
++	filt = readl(par->dc_regs + 0x94);
++	filt |= DC_IRQFILT_H_FILT_SEL;
++
++	for(i = 0; i < DC_HFILT_SIZE; i++) {
++		writel((filt & 0xFFFFFF00) | i, par->dc_regs + 0x94);
++		regs->hcoeff[i << 1] = readl(par->dc_regs + 0x98);
++		regs->hcoeff[(i << 1) + 1] = readl(par->dc_regs + 0x9c);
++	}
++
++	filt &= ~DC_IRQFILT_H_FILT_SEL;
++
++	for(i = 0; i < DC_VFILT_SIZE; i++) {
++		writel((filt & 0xFFFFFF00) | i, par->dc_regs + 0x94);
++		regs->vcoeff[i] = readl(par->dc_regs + 0x98);
+ 	}
+ 
++	/* Save the vg filter coefficients */
++	for(i = 0; i < VP_COEFF_COUNT; i++)
++		regs->vp_coeff[i] =
++			readl(par->df_regs + 0x1000 + (i << 2));
++
++	/* Save the VP gamma */
++
++	writel(0, par->df_regs + 0x38);
++
++	for(i = 0; i <= 0xFF; i++)
++		regs->gamma[i] = readl(par->df_regs + 0x40);
++}
++
++static void lx_restore_dc(struct lxfb_par *par, struct geoderegs *regs)
++{
++	u32 filt;
++	int i;
++
++	/* Unlock the registers */
++	writel(DC_UNLOCK_CODE, par->dc_regs + 0x00);
++
++	/* Restore the framebuffer offset */
++	writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
++
++	/* Blank the configuration registers while we restore */
++	writel(0, par->dc_regs + 0x04);
++	writel(0, par->dc_regs + 0x08);
++
++	/* Restore the bulk of the registers */
++
++	writel(regs->dc.r.arb, par->dc_regs + 0x0C);
++	writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
++	writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
++	writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
++
++	/* skip 0x1c */
++
++	writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
++	writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
++	writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
++
++	writel(regs->dc.r.dctop, par->dc_regs + 0x2c);
++	writel(regs->dc.r.line_size, par->dc_regs + 0x30);
++	writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
++	writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
++	writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
++	writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
++	writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
++	writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
++	writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
++	writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
++	writel(regs->dc.r.fbactive, par->dc_regs + 0x5c);
++	writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
++	writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
++
++	/* skip 0x68, 0x6c, 0x70, 0x74, 0x78, 0x7c */
++
++	writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
++
++	/* 0x84 was written above */
++
++	writel(regs->dc.r.dv_ctl | 0x01, par->dc_regs + 0x88);
++	writel(regs->dc.r.gfx_scale, par->dc_regs + 0x90);
++	writel(regs->dc.r.irq_filt_ctl, par->dc_regs + 0x94);
++
++	/* skip 0x98, 0x9c */
++
++	writel(regs->dc.r.vbi_event_ctl, par->dc_regs + 0xA0);
++	writel(regs->dc.r.vbi_odd_ctl, par->dc_regs + 0xA4);
++	writel(regs->dc.r.vbi_hor, par->dc_regs + 0xA8);
++	writel(regs->dc.r.vbi_ln_odd, par->dc_regs + 0xAC);
++	writel(regs->dc.r.vbi_ln_event, par->dc_regs + 0xB0);
++	writel(regs->dc.r.vbi_pitch, par->dc_regs + 0xB4);
++	writel(regs->dc.r.clr_key, par->dc_regs + 0xB8);
++	writel(regs->dc.r.clr_key_mask, par->dc_regs + 0xBC);
++	writel(regs->dc.r.clr_key_x, par->dc_regs + 0xC0);
++	writel(regs->dc.r.clr_key_y, par->dc_regs + 0xC4);
++	writel(regs->dc.r.irq, par->dc_regs + 0xC8);
++	writel(regs->dc.r.genlk_ctrl, par->dc_regs + 0xD4);
++	writel(regs->dc.r.vid_even_y_st_offset, par->dc_regs + 0xD8);
++	writel(regs->dc.r.vid_even_u_st_offset, par->dc_regs + 0xDC);
++	writel(regs->dc.r.vid_even_v_st_offset, par->dc_regs + 0xE0);
++	writel(regs->dc.r.v_active_even_timing, par->dc_regs + 0xE4);
++	writel(regs->dc.r.v_blank_even_timing, par->dc_regs + 0xE8);
++	writel(regs->dc.r.v_sync_even_timing, par->dc_regs + 0xEC);
++
++	/* Restore the palette */
++	writel(0, par->dc_regs + 0x70);
++
++	for(i = 0; i < DC_PAL_SIZE; i++)
++		writel(regs->pal[i], par->dc_regs + 0x74);
++
++	/* Restore the horizontal filter coefficients */
++	filt = readl(par->dc_regs + 0x94);
++	filt |= DC_IRQFILT_H_FILT_SEL;
++
++	for(i = 0; i < DC_HFILT_SIZE; i++) {
++		writel(((filt & 0xFFFFFF00) | i), par->dc_regs + 0x94);
++		writel(regs->hcoeff[i << 1], par->dc_regs + 0x98);
++		writel(regs->hcoeff[(i << 1) + 1], par->dc_regs + 0x9c);
++	}
++
++	filt &= ~DC_IRQFILT_H_FILT_SEL;
++
++	for(i = 0; i < DC_VFILT_SIZE; i++) {
++		writel(((filt & 0xFFFFFF00) | i), par->dc_regs + 0x94);
++		writel(regs->vcoeff[i], par->dc_regs + 0x98);
++	}
++
++	/* Turn on the dotpll */
++	lx_set_dotpll((u32) (regs->msr.dotpll >> 32));
++
++	/* Restore MSRs */
++	wrmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
++
++	/* Restore the configuration registers */
++
++	writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
++	writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
++
++	/* Lock the DC again */
++	writel(0, par->dc_regs + 0x00);
++}
++
++static void lx_restore_vp(struct lxfb_par *par, struct geoderegs *regs)
++{
++	u32 val;
++	int i;
++
++	/* Restore MSRs */
++
++	wrmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
++	wrmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
++
++	/* Restore the registers */
++
++	writel((u32) regs->vp.r.vx, par->df_regs + 0x10);
++	writel((u32) regs->vp.r.vy, par->df_regs + 0x18);
++	writel((u32) regs->vp.r.vs, par->df_regs + 0x20);
++	writel((u32) regs->vp.r.vck, par->df_regs + 0x28);
++	writel((u32) regs->vp.r.vcm, par->df_regs + 0x30);
++	/* skip 0x38 and 0x40 */
++	writel((u32) regs->vp.r.slr, par->df_regs + 0x48);
++	writel((u32) regs->vp.r.misc, par->df_regs + 0x50);
++	/* skip 0x58 */
++	writel((u32) regs->vp.r.vys, par->df_regs + 0x60);
++	writel((u32) regs->vp.r.vxs, par->df_regs + 0x68);
++	writel((u32) regs->vp.r.vde, par->df_regs + 0x98);
++	writel((u32) regs->vp.r.cck, par->df_regs + 0xA0);
++	writel((u32) regs->vp.r.ccm, par->df_regs + 0xA8);
++	writel((u32) regs->vp.r.cc1, par->df_regs + 0xB0);
++	writel((u32) regs->vp.r.cc2, par->df_regs + 0xB8);
++	writel((u32) regs->vp.r.a1x, par->df_regs + 0xC0);
++	writel((u32) regs->vp.r.a1y, par->df_regs + 0xC8);
++	writel((u32) regs->vp.r.a1c, par->df_regs + 0xD0);
++	writel((u32) regs->vp.r.a1t, par->df_regs + 0xD8);
++	writel((u32) regs->vp.r.a2x, par->df_regs + 0xE0);
++	writel((u32) regs->vp.r.a2y, par->df_regs + 0xE8);
++	writel((u32) regs->vp.r.a2c, par->df_regs + 0xF0);
++	writel((u32) regs->vp.r.a2t, par->df_regs + 0xF8);
++	writel((u32) regs->vp.r.a3x, par->df_regs + 0x100);
++	writel((u32) regs->vp.r.a3y, par->df_regs + 0x108);
++	writel((u32) regs->vp.r.a3c, par->df_regs + 0x110);
++	writel((u32) regs->vp.r.a3t, par->df_regs + 0x118);
++	writel((u32) regs->vp.r.vrr, par->df_regs + 0x120);
++	writel((u32) regs->vp.r.vye, par->df_regs + 0x138);
++	writel((u32) regs->vp.r.a1ye, par->df_regs + 0x140);
++	writel((u32) regs->vp.r.a2ye, par->df_regs + 0x148);
++	writel((u32) regs->vp.r.a3ye, par->df_regs + 0x150);
++
++	/* Panel */
++
++	writel((u32) regs->fp.r.pt1, par->df_regs + 0x400);
++	writel((u32) regs->fp.r.pt2, par->df_regs + 0x408);
++	writel((u32) regs->fp.r.dfc, par->df_regs + 0x418);
++
++	/* Restore panel power */
++
++	val = readl(par->df_regs + 0x410);
++
++	if (regs->fp.r.pm & (1 << 24)) {
++		if (!(val & 0x09))
++                       writel(regs->fp.r.pm, par->df_regs + 0x410);
++	}
++	else {
++		if (!(val & 0x05))
++			writel(regs->fp.r.pm, par->df_regs + 0x410);
++	}
++
++	/* Restore the vp palette */
++
++	writel(0, par->df_regs + 0x38);
++
++	for(i = 0; i <= 0xFF; i++)
++		writel((u32) regs->gamma[i], par->df_regs + 0x40);
++
++	/* Restore filter coefficients */
++
++	for(i = 0; i < VP_COEFF_COUNT; i++)
++		writel(regs->vp_coeff[i],
++		       par->df_regs + 0x1000 + (i << 2));
++
++	/* Restore the configuration registers */
++
++	writel((u32) regs->vp.r.dcfg, par->df_regs + 0x08);
++	writel((u32) regs->vp.r.vcfg, par->df_regs + 0x00);
++}
++
++static void lx_restore_gp(struct lxfb_par *par, struct geoderegs *regs)
++{
++	writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
++	writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
++	writel(regs->gp.r.stride, par->gp_regs + 0x08);
++	writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
++	writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
++	writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
++	writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
++	writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
++	writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
++	writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
++	writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
++	writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
++	writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
++	writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
++
++	/* Writing to these registers would cause a blt to happen */
++	/* 0x38, 0x3c, 0x40 */
++
++	/* Status register (0x44) is read only */
++
++	writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
++	writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
++	writel(regs->gp.r.cmd_top, par->gp_regs + 0x50);
++	writel(regs->gp.r.cmd_bot, par->gp_regs + 0x54);
++	writel(regs->gp.r.cmd_read, par->gp_regs + 0x58);
++	writel(regs->gp.r.cmd_write, par->gp_regs + 0x5C);
++	writel(regs->gp.r.ch3_offset, par->gp_regs + 0x60);
++	writel(regs->gp.r.ch3_mode_str, par->gp_regs + 0x64);
++	writel(regs->gp.r.ch3_width, par->gp_regs + 0x6C);
++	writel(regs->gp.r.ch3_hsrc, par->gp_regs + 0x70);
++
++	writel(regs->gp.r.int_cntrl, par->gp_regs + 0x70);
++}
++
++static void lx_restore_regs(struct fb_info *info, struct geoderegs *regs)
++{
++	struct lxfb_par *par = info->par;
++
++	lx_restore_gp(par, regs);
++	lx_restore_vp(par, regs);
++	lx_restore_dc(par, regs);
++}
++
++static int lx_power_on = 1;
++
++int lx_shutdown(struct fb_info *info)
++{
++	if (lx_power_on == 0)
++		return 0;
++
++	lx_save_regs(info, &saved_regs);
++	lx_graphics_disable(info);
++
++	lx_power_on = 0;
++	return 0;
++}
++
++int lx_powerup(struct fb_info *info)
++{
++	if (lx_power_on == 1)
++		return 0;
++
++	lx_restore_regs(info, &saved_regs);
++
++	lx_power_on = 1;
+ 	return 0;
+ }
+diff -purN linux_2.6.24_org/drivers/video/geode/Makefile linux_2.6.24_olpc/drivers/video/geode/Makefile
+--- linux_2.6.24_org/drivers/video/geode/Makefile	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/Makefile	2008-02-15 18:58:41.000000000 +0000
+@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX)  += gxfb.o
+ obj-$(CONFIG_FB_GEODE_LX)  += lxfb.o
+ 
+ gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o
+-gxfb-objs  := gxfb_core.o display_gx.o video_gx.o
++gxfb-objs  := gxfb_core.o display_gx.o video_gx.o suspend_gx.o
+ lxfb-objs  := lxfb_core.o lxfb_ops.o
+diff -purN linux_2.6.24_org/drivers/video/geode/suspend_gx.c linux_2.6.24_olpc/drivers/video/geode/suspend_gx.c
+--- linux_2.6.24_org/drivers/video/geode/suspend_gx.c	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/video/geode/suspend_gx.c	2008-02-15 18:58:41.000000000 +0000
+@@ -0,0 +1,272 @@
++#include <linux/fb.h>
++#include <asm/io.h>
++#include <asm/msr.h>
++
++#include "geodefb.h"
++#include "video_gx.h"
++
++void gx_set_dotpll(struct fb_info *info, struct geoderegs *regs)
++{
++	int timeout = 1000;
++
++	u64 rstpll, dotpll;
++	
++	rdmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
++	rdmsrl(MSR_GLCP_DOTPLL, dotpll);
++
++	dotpll &= 0x00000000ffffffffull;
++	dotpll |= regs->msr.dotpll & 0xffffffff00000000ull;
++	
++	dotpll |= MSR_GLCP_DOTPLL_DOTRESET;
++	dotpll &= ~MSR_GLCP_DOTPLL_BYPASS;
++	
++	wrmsrl(MSR_GLCP_DOTPLL, dotpll);
++
++	rstpll |= (regs->msr.rstpll & 
++		   ( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2  |
++		     MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 |
++		     MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3));
++	
++	wrmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
++	dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET);
++	wrmsrl(MSR_GLCP_DOTPLL, dotpll);
++
++	do {
++		rdmsrl(MSR_GLCP_DOTPLL, dotpll);
++	} while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
++}
++
++/* FIXME: Make sure nothing is read to clear */
++
++void gx_save_regs(struct fb_info *info, struct geoderegs *regs)
++{
++	struct geodefb_par *par = info->par;
++	int i;
++
++	/* Wait for the BLT engine to stop being busy */
++	while(readl(par->gp_regs + 0x44) & 0x05);
++
++	rdmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
++	rdmsrl(MSR_GLCP_DOTPLL, regs->msr.dotpll);
++	rdmsrl(MSR_GLCP_SYS_RSTPLL, regs->msr.rstpll);
++
++	writel(0x4758, par->dc_regs + 0x00);
++
++	memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
++	memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
++	memcpy(regs->vp.b, par->vid_regs, VP_REG_SIZE);
++	memcpy(regs->fp.b, par->vid_regs + 0x400, FP_REG_SIZE);
++
++	/* Save the palettes */
++	writel(0, par->dc_regs + 0x70);
++
++	for(i = 0; i < DC_PAL_SIZE; i++) 
++		regs->pal[i] = readl(par->dc_regs + 0x74);
++	
++	writel(0, par->vid_regs + 0x38);
++
++	for(i = 0; i < 0xFF; i++)
++		regs->gamma[i] = readl(par->vid_regs + 0x40);       	
++}
++
++void gx_restore_regs(struct fb_info *info, struct geoderegs *regs)
++{
++	struct geodefb_par *par = info->par;
++	u32 val, i;
++
++	/* DOTPLL */
++	gx_set_dotpll(info, regs);
++
++	/* GP */
++
++	writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
++	writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
++	writel(regs->gp.r.stride, par->gp_regs + 0x08);
++	writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
++	writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
++	writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
++	writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
++	writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
++	writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
++	writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
++	writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
++	writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
++	writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
++	writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
++
++	/* Don't write the raster / vector / blt mode regs */
++	/* status register is read only */
++
++	writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
++	writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
++	
++	/* DC */
++	
++	/* Write the unlock value */
++	writel(0x4758, par->dc_regs + 0x00);
++
++	writel(0, par->dc_regs + 0x70);
++	
++	for(i = 0; i < DC_PAL_SIZE; i++)
++		writel(regs->pal[i], par->dc_regs + 0x74);
++
++	/* Write the gcfg register without the enables */
++	writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04);
++	
++	/* Write the vcfg register without the enables */
++	writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08);
++	
++	/* Write the rest of the active registers */
++
++	writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
++	writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
++	writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
++	writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C);
++	writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
++	writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
++	writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
++	writel(regs->dc.r.line_size, par->dc_regs + 0x30);
++	writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
++	writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
++	writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
++	writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
++	writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
++	writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
++	writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
++	writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
++	writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
++	writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
++	writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68);
++	
++	/* Don't write the line_cnt or diag registers */
++
++	writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
++	writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
++	writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C);
++	
++	/* VP */
++
++	/* MSR */
++	wrmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
++
++	writel(0, par->vid_regs + 0x38);
++	
++	for(i = 0; i < 0xFF; i++)
++		writel((u32) regs->gamma[i], par->vid_regs + 0x40);   
++
++	/* Don't enable video yet */
++	writel((u32) regs->vp.r.vcfg & ~0x01, par->vid_regs + 0x00);
++
++	/* Don't enable the CRT yet */
++	writel((u32) regs->vp.r.dcfg & ~0x0F, par->vid_regs + 0x08);
++
++	/* Write the rest of the VP registers */
++
++	writel((u32) regs->vp.r.vx, par->vid_regs + 0x10);
++	writel((u32) regs->vp.r.vy, par->vid_regs + 0x18);
++	writel((u32) regs->vp.r.vs, par->vid_regs + 0x20);
++	writel((u32) regs->vp.r.vck, par->vid_regs + 0x28);
++	writel((u32) regs->vp.r.vcm, par->vid_regs + 0x30);
++	writel((u32) regs->vp.r.misc, par->vid_regs + 0x50);
++	writel((u32) regs->vp.r.ccs, par->vid_regs + 0x58);
++	writel((u32) regs->vp.r.vdc, par->vid_regs + 0x78);
++	writel((u32) regs->vp.r.vco, par->vid_regs + 0x80);
++	writel((u32) regs->vp.r.crc, par->vid_regs + 0x88);
++	writel((u32) regs->vp.r.vde, par->vid_regs + 0x98);
++	writel((u32) regs->vp.r.cck, par->vid_regs + 0xA0);
++	writel((u32) regs->vp.r.ccm, par->vid_regs + 0xA8);
++	writel((u32) regs->vp.r.cc1, par->vid_regs + 0xB0);
++	writel((u32) regs->vp.r.cc2, par->vid_regs + 0xB8);
++	writel((u32) regs->vp.r.a1x, par->vid_regs + 0xC0);
++	writel((u32) regs->vp.r.a1y, par->vid_regs + 0xC8);
++	writel((u32) regs->vp.r.a1c, par->vid_regs + 0xD0);
++	writel((u32) regs->vp.r.a1t, par->vid_regs + 0xD8);
++	writel((u32) regs->vp.r.a2x, par->vid_regs + 0xE0);
++	writel((u32) regs->vp.r.a2y, par->vid_regs + 0xE8);
++	writel((u32) regs->vp.r.a2c, par->vid_regs + 0xF0);
++	writel((u32) regs->vp.r.a2t, par->vid_regs + 0xF8);
++	writel((u32) regs->vp.r.a3x, par->vid_regs + 0x100);
++	writel((u32) regs->vp.r.a3y, par->vid_regs + 0x108);
++	writel((u32) regs->vp.r.a3c, par->vid_regs + 0x110);
++	writel((u32) regs->vp.r.a3t, par->vid_regs + 0x118);
++	writel((u32) regs->vp.r.vrr, par->vid_regs + 0x120);
++	
++	
++	/* FP registers */
++	
++	writel((u32) regs->fp.r.pt1, par->vid_regs + 0x400);
++	writel((u32) regs->fp.r.pt2, par->vid_regs + 0x408);
++
++	writel((u32) regs->fp.r.dfc, par->vid_regs + 0x418);
++	writel(regs->fp.r.blfsr, par->vid_regs + 0x420);
++	writel(regs->fp.r.rlfsr, par->vid_regs + 0x428);
++	writel(regs->fp.r.fmi, par->vid_regs + 0x430);
++	writel(regs->fp.r.fmd, par->vid_regs + 0x438);
++	writel(regs->fp.r.dca, par->vid_regs + 0x448);
++	writel(regs->fp.r.dmd, par->vid_regs + 0x450);
++	writel(regs->fp.r.crc, par->vid_regs + 0x458);
++	writel(regs->fp.r.fbb, par->vid_regs + 0x460);
++	
++	/* Final enables */
++
++	val = readl(par->vid_regs + 0x410);
++
++	/* Control the panel */
++	if (regs->fp.r.pm & (1 << 24)) {
++
++		if (!(val & 0x09))
++			writel(regs->fp.r.pm, par->vid_regs + 0x410);
++	}
++	else {
++		if (!(val & 0x05))
++			writel(regs->fp.r.pm, par->vid_regs + 0x410);
++	}
++       	
++	/* Turn everything on */
++
++	writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
++	writel((u32) regs->vp.r.vcfg, par->vid_regs + 0x00);
++	writel((u32) regs->vp.r.dcfg, par->vid_regs + 0x08);
++	writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
++}
++
++
++#ifdef DEBUG
++
++void dump_regs(struct fb_info *info, int mode) {
++
++	struct geodefb_par *par = info->par;
++	u32 val;
++	int i;
++
++	if (mode == 0) {
++		for(i = 0; i < GP_REG_SIZE; i += 4) {
++			val = readl(par->gp_regs + i);
++		}
++	}
++
++	if (mode == 1) {
++		writel(0x4758, par->dc_regs + 0x00);
++
++		for(i = 0; i < DC_REG_SIZE; i += 4) {
++			val = readl(par->dc_regs + i);
++			printk("DC%x: %x\n", i, val);
++		}
++	}
++
++	if (mode == 2) {
++		for(i = 0; i < VP_REG_SIZE; i += 8) {
++			val = readl(par->vid_regs + i);
++			printk("VP%x: %x\n", i, val);
++		}
++	}
++
++	if (mode == 3) {
++		for(i = 0; i < FP_REG_SIZE; i += 8) {
++			val = readl(par->vid_regs + 0x400 + i);
++			printk("FP%x: %x\n", i, val);
++		}
++	}
++}
++
++#endif
+diff -purN linux_2.6.24_org/drivers/video/geode/video_gx.c linux_2.6.24_olpc/drivers/video/geode/video_gx.c
+--- linux_2.6.24_org/drivers/video/geode/video_gx.c	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/video_gx.c	2008-02-15 18:58:41.000000000 +0000
+@@ -16,10 +16,14 @@
+ #include <asm/io.h>
+ #include <asm/delay.h>
+ #include <asm/msr.h>
++#include <asm/olpc.h>
+ 
+ #include "geodefb.h"
+ #include "video_gx.h"
++#include "display_gx.h"
+ 
++/* This structure is used to store the saved registers during suspend */
++static struct geoderegs gx_saved_regs;
+ 
+ /*
+  * Tables of register settings for various DOTCLKs.
+@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_
+ 	{ 13888, POSTDIV3,	    0x000007E1 },	/*  72.0000 */
+ 	{ 13426, PREMULT2,	    0x00000F4A },	/*  74.4810 */
+ 	{ 13333, 0,		    0x00000052 },	/*  75.0000 */
+-	{ 12698, 0,		    0x00000056 },	/*  78.7500 */
++	{ 12698, 0,		    0x00000056 },       /*  78.7500 */
+ 	{ 12500, POSTDIV3|PREMULT2, 0x00000709 },	/*  80.0000 */
+ 	{ 11135, PREMULT2,	    0x00000262 },	/*  89.8000 */
+ 	{ 10582, 0,		    0x000002D2 },	/*  94.5000 */
+@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_
+ 	{  4357, 0, 0x0000057D },	/* 229.5000 */
+ };
+ 
+-static void gx_set_dclk_frequency(struct fb_info *info)
++void gx_set_dclk_frequency(struct fb_info *info)
+ {
++	struct geodefb_par *par = info->par;
+ 	const struct gx_pll_entry *pll_table;
+ 	int pll_table_len;
+ 	int i, best_i;
+@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct
+ 	do {
+ 		rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+ 	} while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
++
++	par->curdclk = pll_table[best_i].dotpll_value;
+ }
+ 
+-static void
+-gx_configure_tft(struct fb_info *info)
++/* Find out the current clock - we will use this information to avoid
++   re-programming it if we don't need to */
++
++unsigned int gx_get_dclk(struct fb_info *info)
+ {
+-	struct geodefb_par *par = info->par;
+-	unsigned long val;
+-	unsigned long fp;
++	const struct gx_pll_entry *pll_table;
++	int pll_table_len;
++	u64 dotpll;
++	int i;
+ 
+-	/* Set up the DF pad select MSR */
++	if (cpu_data(0).x86_mask == 1) {
++		pll_table = gx_pll_table_14MHz;
++		pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz);
++	} else {
++		pll_table = gx_pll_table_48MHz;
++		pll_table_len = ARRAY_SIZE(gx_pll_table_48MHz);
++	}
+ 
+-	rdmsrl(GX_VP_MSR_PAD_SELECT, val);
+-	val &= ~GX_VP_PAD_SELECT_MASK;
+-	val |= GX_VP_PAD_SELECT_TFT;
+-	wrmsrl(GX_VP_MSR_PAD_SELECT, val);
++	rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+ 
+-	/* Turn off the panel */
++	for(i = 0; i < pll_table_len; i++) {
++		if (pll_table[i].dotpll_value == (u32) (dotpll >> 32))
++			break;
++	}
++
++	return (i == pll_table_len) ? 0 : pll_table[i].pixclock;
++}
+ 
+-	fp = readl(par->vid_regs + GX_FP_PM);
+-	fp &= ~GX_FP_PM_P;
+-	writel(fp, par->vid_regs + GX_FP_PM);
+ 
+-	/* Set timing 1 */
++#define CMP(val, mask, res) (((val) & (mask)) == (res))
+ 
+-	fp = readl(par->vid_regs + GX_FP_PT1);
+-	fp &= GX_FP_PT1_VSIZE_MASK;
+-	fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
+-	writel(fp, par->vid_regs + GX_FP_PT1);
++static void
++gx_configure_tft(struct fb_info *info) {
+ 
+-	/* Timing 2 */
+-	/* Set bits that are always on for TFT */
++	struct geodefb_par *par = info->par;
++	u32 val, fp = 0, fp1, fp2, sync = 0;
+ 
+-	fp = 0x0F100000;
++	/* Set up the DF pad select MSR */
+ 
+-	/* Add sync polarity */
++	rdmsrl(GX_VP_MSR_PAD_SELECT, val);
++
++	if ((val & GX_VP_PAD_SELECT_MASK) != GX_VP_PAD_SELECT_TFT) {
++		val &= ~GX_VP_PAD_SELECT_MASK;
++		val |= GX_VP_PAD_SELECT_TFT;
++		wrmsrl(GX_VP_MSR_PAD_SELECT, val);
++	}
+ 
+ 	if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+-		fp |= GX_FP_PT2_VSP;
++		sync |= GX_FP_PT2_VSP;
+ 
+ 	if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+-		fp |= GX_FP_PT2_HSP;
++		sync |= GX_FP_PT2_HSP;
+ 
+-	writel(fp, par->vid_regs + GX_FP_PT2);
++	/* We only need to turn off the panel if something changed */
+ 
+-	/*  Set the dither control */
+-	writel(0x70, par->vid_regs + GX_FP_DFC);
++	fp1 = readl(par->vid_regs + GX_FP_PT1);
++	fp2 = readl(par->vid_regs + GX_FP_PT2);
++
++	if (!CMP(fp1, GX_FP_PT1_VSIZE_MASK, info->var.yres << GX_FP_PT1_VSIZE_SHIFT) ||
++	    (fp2 != (0x0F100000 | sync))) {
++
++		/* Turn off the panel */
++
++#ifdef NOTUSED
++		/* Do we really need to turn off the panel? */
++		/* Possibly - we have a glitch somewhere */
+ 
+-	/* Enable the FP data and power (in case the BIOS didn't) */
++		fp = readl(par->vid_regs + GX_FP_PM);
++		fp &= ~GX_FP_PM_P;
++		writel(fp, par->vid_regs + GX_FP_PM);
++#endif
+ 
+-	fp = readl(par->vid_regs + GX_DCFG);
+-	fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
+-	writel(fp, par->vid_regs + GX_DCFG);
++		/* Timing 1 */
++		fp1 &= GX_FP_PT1_VSIZE_MASK;
++		fp1 |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
++		writel(fp, par->vid_regs + GX_FP_PT1);
+ 
+-	/* Unblank the panel */
++		/* Timing 2 */
++		writel(0x0F100000 | sync, par->vid_regs + GX_FP_PT2);
++	}
++
++	/*  Set the dither control */
++	if (readl(par->vid_regs + GX_FP_DFC) != 0x70) {
++		writel(0x70, par->vid_regs + GX_FP_DFC);
++	}
++
++	/* Turn on the panel */
+ 
+ 	fp = readl(par->vid_regs + GX_FP_PM);
+-	fp |= GX_FP_PM_P;
+-	writel(fp, par->vid_regs + GX_FP_PM);
++
++	if (!(fp & 0x09))
++		writel(fp | GX_FP_PM_P, par->vid_regs + GX_FP_PM);
+ }
+ 
++#define DCFG_DEFAULT_VAL GX_DCFG_CRT_SYNC_SKW_DFLT | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN | \
++GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN
++
+ static void gx_configure_display(struct fb_info *info)
+ {
+ 	struct geodefb_par *par = info->par;
+-	u32 dcfg, misc;
++	u32 dcfg, misc, sync = 0;
+ 
+ 	/* Set up the MISC register */
+-
+ 	misc = readl(par->vid_regs + GX_MISC);
+ 
+-	/* Power up the DAC */
+-	misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
++	/* We leave gamma enabled if it was already enabled.
++	   Although the hardware enables it without setting
++	   up the gamma table, the BIOS or bootloader ought
++	   to have either disabled it or loaded a table by now */
+ 
+-	/* Disable gamma correction */
+-	misc |= GX_MISC_GAM_EN;
+ 
+-	writel(misc, par->vid_regs + GX_MISC);
+ 
+-	/* Write the display configuration */
+-	dcfg = readl(par->vid_regs + GX_DCFG);
++	if (par->enable_crt) {
++		/* Power up the CRT DACs */
++		if (misc & ( GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN)) {
++			misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
++			writel(misc, par->vid_regs + GX_MISC);
++		}
+ 
+-	/* Disable hsync and vsync */
+-	dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+-	writel(dcfg, par->vid_regs + GX_DCFG);
++		if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
++			sync |= GX_DCFG_CRT_HSYNC_POL;
+ 
+-	/* Clear bits from existing mode. */
+-	dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
+-		  | GX_DCFG_CRT_HSYNC_POL   | GX_DCFG_CRT_VSYNC_POL
+-		  | GX_DCFG_VSYNC_EN        | GX_DCFG_HSYNC_EN);
++		if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
++			sync |= GX_DCFG_CRT_VSYNC_POL;
++	}
++	else {
++		/* Turn off the CRT DACs in FP mode - we don't need them */
++		if ((misc & (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN))) {
++			misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
++			writel(misc, par->vid_regs + GX_MISC);
++		}
++	}
+ 
+-	/* Set default sync skew.  */
+-	dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
++	/* Write the display configuration */
++	dcfg = readl(par->vid_regs + GX_DCFG);
+ 
+-	/* Enable hsync and vsync. */
+-	dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
++	if (!CMP(dcfg, DCFG_DEFAULT_VAL | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL,
++		 DCFG_DEFAULT_VAL | sync)) {
+ 
+-	/* Sync polarities. */
+-	if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+-		dcfg |= GX_DCFG_CRT_HSYNC_POL;
+-	if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+-		dcfg |= GX_DCFG_CRT_VSYNC_POL;
++		/* Disable hsync and vsync */
++		dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
++		writel(dcfg, par->vid_regs + GX_DCFG);
+ 
+-	/* Enable the display logic */
+-	/* Set up the DACS to blank normally */
++		/* Clear bits from existing mode. */
++		dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
++			  | GX_DCFG_CRT_HSYNC_POL   | GX_DCFG_CRT_VSYNC_POL
++			  | GX_DCFG_VSYNC_EN        | GX_DCFG_HSYNC_EN);
+ 
+-	dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
++		/* Set default sync skew.  */
++		dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
+ 
+-	/* Enable the external DAC VREF? */
++		/* Enable hsync and vsync. */
++		dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
+ 
+-	writel(dcfg, par->vid_regs + GX_DCFG);
++		/* Enable the display logic */
++		dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
++
++		writel(dcfg, par->vid_regs + GX_DCFG);
++	}
+ 
+ 	/* Set up the flat panel (if it is enabled) */
+ 
+@@ -289,6 +348,100 @@ static void gx_configure_display(struct 
+ 		gx_configure_tft(info);
+ }
+ 
++int gxfb_powerdown(struct fb_info *info) 
++{
++	struct geodefb_par *par = info->par;
++
++	/* We're already suspended */
++
++	if (par->state != FB_POWER_STATE_ON)
++		return 0;
++
++	/* Save the registers */
++	gx_save_regs(info, &gx_saved_regs);
++
++	/* Shut down the engine */
++
++	writel(gx_saved_regs.vp.r.vcfg & ~0x01, par->vid_regs + GX_VCFG);
++	writel(gx_saved_regs.vp.r.dcfg & ~0x0F, par->vid_regs + GX_DCFG);
++
++	/* Turn off the flat panel unless we are attached to a DCON */
++	if (!olpc_has_dcon())
++		writel(gx_saved_regs.fp.r.pm & ~GX_FP_PM_P, par->vid_regs + GX_FP_PM);
++
++	writel(0x4758, par->dc_regs + DC_UNLOCK);
++
++	writel(gx_saved_regs.dc.r.gcfg & ~0x0F,
++	       par->dc_regs + DC_GENERAL_CFG);
++
++	writel(gx_saved_regs.dc.r.dcfg & ~0x19,
++	       par->dc_regs + DC_DISPLAY_CFG);
++	
++	par->state = FB_POWER_STATE_SUSPEND;
++
++	return 0;
++}
++
++int gxfb_powerup(struct fb_info *info)
++{
++	struct geodefb_par *par = info->par;
++	u32 val;
++
++	if (par->state == FB_POWER_STATE_SUSPEND) {
++
++		writel(gx_saved_regs.dc.r.dcfg,
++		       par->dc_regs + DC_DISPLAY_CFG);
++
++		writel(gx_saved_regs.vp.r.vcfg, par->vid_regs + GX_VCFG);
++		writel(gx_saved_regs.vp.r.dcfg, par->vid_regs + GX_DCFG);
++
++		val = readl(par->vid_regs + GX_FP_PM);
++
++		/* power up the panel if it needs it; we don't always power it down */
++		if (!(val & 0x09)) {
++			writel(gx_saved_regs.fp.r.pm, par->vid_regs + GX_FP_PM);
++			mdelay(64);
++		}
++	}
++
++	/* If the panel is currently on its way up, then wait up to 100ms
++	   for it */
++	
++	if (readl(par->vid_regs + GX_FP_PM) & 0x08) {
++		int i;
++		
++		for(i = 0; i < 10; i++) {
++			if (readl(par->vid_regs + GX_FP_PM) & 0x01)
++				break;
++
++			mdelay(10);
++		}
++
++		if (i == 10) 
++			printk(KERN_ERR "gxfb:  Panel power up timed out\n");
++	}
++
++	if (par->state == FB_POWER_STATE_ON)
++		return 0;
++	
++	switch(par->state) {
++	case FB_POWER_STATE_OFF:
++		gx_restore_regs(info, &gx_saved_regs);
++		break;
++
++	case FB_POWER_STATE_SUSPEND:
++		/* Do this because it will turn on the FIFO which will
++	   	   start the line count */
++		writel(gx_saved_regs.dc.r.gcfg,
++		       par->dc_regs + DC_GENERAL_CFG);
++		writel(0x0, par->dc_regs + DC_UNLOCK);
++		break;
++	}
++
++	par->state = FB_POWER_STATE_ON;
++	return 0;
++}
++
+ static int gx_blank_display(struct fb_info *info, int blank_mode)
+ {
+ 	struct geodefb_par *par = info->par;
+@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_in
+ 	default:
+ 		return -EINVAL;
+ 	}
++
+ 	dcfg = readl(par->vid_regs + GX_DCFG);
+ 	dcfg &= ~(GX_DCFG_DAC_BL_EN
+ 		  | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN);
+@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_in
+ 		dcfg |= GX_DCFG_VSYNC_EN;
+ 	writel(dcfg, par->vid_regs + GX_DCFG);
+ 
+-	/* Power on/off flat panel. */
++	/* Power on/off flat panel */
+ 
+ 	if (par->enable_crt == 0) {
+ 		fp_pm = readl(par->vid_regs + GX_FP_PM);
+@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_in
+ 	return 0;
+ }
+ 
++extern struct fb_info *gxfb_info;
++
++/* This function controls the flatpanel power sequencing - this is used
++   by the OLPC power management engine to enable the FP sequencing much
++   earlier in the resume process
++*/
++
++void gxfb_flatpanel_control(int state)
++{
++	struct geodefb_par *par = gxfb_info->par;
++	u32 val, fp = readl(par->vid_regs + GX_FP_PM);
++	val  = fp;
++
++	/* Turn on the panel if it isn't aleady */
++
++	if (state) {
++		if (!(val & 0x01))
++			val |= GX_FP_PM_P;
++	}
++	else {
++		if (!(val & 0x02))
++			val &= ~GX_FP_PM_P;
++	}
++
++	if (val != fp)
++		writel(val, par->vid_regs + GX_FP_PM);
++}
++
+ struct geode_vid_ops gx_vid_ops = {
+ 	.set_dclk	   = gx_set_dclk_frequency,
++	.get_dclk          = gx_get_dclk,
+ 	.configure_display = gx_configure_display,
+ 	.blank_display	   = gx_blank_display,
+ };
+diff -purN linux_2.6.24_org/drivers/video/geode/video_gx.h linux_2.6.24_olpc/drivers/video/geode/video_gx.h
+--- linux_2.6.24_org/drivers/video/geode/video_gx.h	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/video_gx.h	2008-02-15 18:58:41.000000000 +0000
+@@ -11,6 +11,8 @@
+ #ifndef __VIDEO_GX_H__
+ #define __VIDEO_GX_H__
+ 
++#include "geode_regs.h"
++
+ extern struct geode_vid_ops gx_vid_ops;
+ 
+ /* GX Flatpanel control MSR */
+@@ -20,6 +22,8 @@ extern struct geode_vid_ops gx_vid_ops;
+ 
+ /* Geode GX video processor registers */
+ 
++#define GX_VCFG         0x0000
++
+ #define GX_DCFG		0x0008
+ #  define GX_DCFG_CRT_EN		0x00000001
+ #  define GX_DCFG_HSYNC_EN		0x00000002
+@@ -42,6 +46,14 @@ extern struct geode_vid_ops gx_vid_ops;
+ #define GX_MISC_DAC_PWRDN  0x00000400
+ #define GX_MISC_A_PWRDN    0x00000800
+ 
++/* Gamma correction RAM - address and data registers */
++
++#define GX_GAR 0x038
++#define GX_GDR 0x040
++
++#define GXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
++#define GXFB_GAMMA_SIZE (GXFB_GAMMA_DWORDS * sizeof(unsigned int))
++
+ /* Geode GX flat panel display control registers */
+ 
+ #define GX_FP_PT1 0x0400
+@@ -69,4 +81,13 @@ extern struct geode_vid_ops gx_vid_ops;
+ #  define MSR_GLCP_DOTPLL_BYPASS		(0x0000000000008000ull)
+ #  define MSR_GLCP_DOTPLL_LOCK			(0x0000000002000000ull)
+ 
++int gxfb_powerdown(struct fb_info *info);
++int gxfb_powerup(struct fb_info *info);
++
++void gx_set_dclk_frequency(struct fb_info *info);
++unsigned int gx_get_dclk(struct fb_info *info);
++
++void gx_save_regs(struct fb_info *info, struct geoderegs *regs);
++void gx_restore_regs(struct fb_info *info, struct geoderegs *regs);
++
+ #endif /* !__VIDEO_GX_H__ */
+diff -purN linux_2.6.24_org/drivers/video/Kconfig linux_2.6.24_olpc/drivers/video/Kconfig
+--- linux_2.6.24_org/drivers/video/Kconfig	2008-02-15 20:11:22.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/Kconfig	2008-02-15 18:58:36.000000000 +0000
+@@ -1869,6 +1869,15 @@ config FB_PS3_DEFAULT_SIZE_M
+ 	  The default value can be overridden on the kernel command line
+ 	  using the "ps3fb" option (e.g. "ps3fb=9M");
+ 
++config FB_OLPC_DCON
++	tristate "One Laptop Per Child Display CONtroller support"
++	depends on OLPC
++	select I2C
++	---help---
++	  Add support for the OLPC DCON controller.  This controller is only
++	  available on OLPC platforms.   Unless you have one of these
++	  platforms, you will want to say 'N'.
++
+ config FB_XILINX
+ 	tristate "Xilinx frame buffer support"
+ 	depends on FB && XILINX_VIRTEX
+diff -purN linux_2.6.24_org/drivers/video/Makefile linux_2.6.24_olpc/drivers/video/Makefile
+--- linux_2.6.24_org/drivers/video/Makefile	2008-02-15 20:11:22.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/Makefile	2008-02-15 18:58:36.000000000 +0000
+@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx
+ obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
+ obj-$(CONFIG_FB_PS3)		  += ps3fb.o
+ obj-$(CONFIG_FB_SM501)            += sm501fb.o
++obj-$(CONFIG_FB_OLPC_DCON)	  += olpc_dcon.o
+ obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
+ obj-$(CONFIG_FB_OMAP)             += omap/
+ 
+diff -purN linux_2.6.24_org/drivers/video/modedb.c linux_2.6.24_olpc/drivers/video/modedb.c
+--- linux_2.6.24_org/drivers/video/modedb.c	2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/modedb.c	2008-02-15 18:58:41.000000000 +0000
+@@ -33,6 +33,8 @@ const char *fb_mode_option;
+      *  Standard video mode definitions (taken from XFree86)
+      */
+ 
++#define DEFAULT_MODEDB_INDEX	0
++
+ static const struct fb_videomode modedb[] = {
+     {
+ 	/* 640x400 @ 70 Hz, 31.5 kHz hsync */
+@@ -508,7 +510,8 @@ int fb_find_mode(struct fb_var_screeninf
+     }
+ 
+     if (!default_mode)
+-	default_mode = &db[0];
++	    default_mode = (db == modedb) ?
++		    &modedb[DEFAULT_MODEDB_INDEX] : &db[0];
+ 
+     if (!default_bpp)
+ 	default_bpp = 8;
+diff -purN linux_2.6.24_org/drivers/video/olpc_dcon.c linux_2.6.24_olpc/drivers/video/olpc_dcon.c
+--- linux_2.6.24_org/drivers/video/olpc_dcon.c	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/video/olpc_dcon.c	2008-02-15 18:58:42.000000000 +0000
+@@ -0,0 +1,946 @@
++/*
++ * Mainly by David Woodhouse, somewhat modified by Jordan Crouse
++ *
++ * Copyright © 2006-2007  Red Hat, Inc.
++ * Copyright © 2006-2007  Advanced Micro Devices, Inc.
++ *
++ * This program is free software.  You can redistribute it and/or
++ * modify it under the terms of version 2 of the GNU General Public
++ * License as published by the Free Software Foundation.
++ */
++
++
++#include <linux/kernel.h>
++#include <linux/fb.h>
++#include <linux/console.h>
++#include <linux/i2c.h>
++#include <linux/platform_device.h>
++#include <linux/i2c-id.h>
++#include <linux/pci.h>
++#include <linux/vt_kern.h>
++#include <linux/pci_ids.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/backlight.h>
++#include <linux/device.h>
++#include <linux/notifier.h>
++#include <asm/uaccess.h>
++#include <linux/ctype.h>
++#include <linux/reboot.h>
++#include <asm/tsc.h>
++#include <asm/olpc.h>
++#include <asm/geode.h>
++
++#include "olpc_dcon.h"
++
++/* Module definitions */
++
++static int resumeline = 898;
++module_param(resumeline, int, 0444);
++
++static int noinit;
++module_param(noinit, int, 0444);
++
++/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */
++static int useaa = 1;
++module_param(useaa, int, 0444);
++
++/* I2C structures */
++
++static struct i2c_driver dcon_driver;
++static struct i2c_client *dcon_client;
++
++/* Platform devices */
++static struct platform_device *dcon_device;
++
++/* Backlight device */
++static struct backlight_device *dcon_bl_dev;
++
++/* Base address of the GPIO registers */
++static unsigned long gpio_base;
++
++static struct fb_info *fbinfo;
++
++/* Current source, initialized at probe time */
++static int dcon_source;
++
++/* Desired source */
++static int dcon_pending;
++
++/* Current output type */
++static int dcon_output = DCON_OUTPUT_COLOR;
++
++/* Current sleep status (not yet implemented) */
++static int dcon_sleep_val = DCON_ACTIVE;
++
++/* Shadow register for the DCON_REG_MODE register */
++static unsigned short dcon_disp_mode;
++
++/* Variables used during switches */
++static int dcon_switched;
++
++static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue);
++
++static unsigned short normal_i2c[] = { 0x0D, I2C_CLIENT_END };
++I2C_CLIENT_INSMOD;
++
++#define dcon_write(reg,val) i2c_smbus_write_word_data(dcon_client,reg,val)
++#define dcon_read(reg) i2c_smbus_read_word_data(dcon_client,reg)
++
++/* The current backlight value - this saves us some smbus traffic */
++static int bl_val = -1;
++
++/* ===== API functions - these are called by a variety of users ==== */
++
++static int dcon_request_irq(void);
++
++static int dcon_hw_init(struct i2c_client *client, int is_init)
++{
++	uint16_t ver;
++	int rc = 0;
++
++	ver = i2c_smbus_read_word_data(client, DCON_REG_ID);
++	if ((ver >> 8) != 0xDC) {
++		printk(KERN_ERR "olpc-dcon:  DCON ID not 0xDCxx: 0x%04x "
++				"instead.\n", ver);
++		rc = -ENXIO;
++		goto err;
++	}
++
++	if (is_init) {
++		printk(KERN_INFO "olpc-dcon:  Discovered DCON version %x\n",
++				ver & 0xFF);
++		if ((rc = dcon_request_irq())) {
++			printk(KERN_ERR "olpc-dcon:  Unable to grab IRQ.\n");
++			goto err;
++		}
++	}
++
++	if (ver < 0xdc02 && !noinit) {
++		/* Initialize the DCON registers */
++
++		/* Start with work-arounds for DCON ASIC */
++		i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
++		i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
++		i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
++		i2c_smbus_write_word_data(client, 0x0b, 0x007a);
++		i2c_smbus_write_word_data(client, 0x36, 0x025c);
++		i2c_smbus_write_word_data(client, 0x37, 0x025e);
++		
++		/* Initialise SDRAM */
++
++		i2c_smbus_write_word_data(client, 0x3b, 0x002b);
++		i2c_smbus_write_word_data(client, 0x41, 0x0101);
++		i2c_smbus_write_word_data(client, 0x42, 0x0101);
++	}
++	else if (!noinit) {
++		/* SDRAM setup/hold time */
++		i2c_smbus_write_word_data(client, 0x3a, 0xc040);
++		i2c_smbus_write_word_data(client, 0x41, 0x0000);
++		i2c_smbus_write_word_data(client, 0x41, 0x0101);
++		i2c_smbus_write_word_data(client, 0x42, 0x0101);
++	}
++
++	/* Colour swizzle, AA, no passthrough, backlight */
++	if (is_init) {
++		dcon_disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | MODE_CSWIZZLE;
++		if (useaa)
++			dcon_disp_mode |= MODE_COL_AA;
++	}
++	i2c_smbus_write_word_data(client, DCON_REG_MODE, dcon_disp_mode);
++
++
++	/* Set the scanline to interrupt on during resume */
++
++	i2c_smbus_write_word_data(client, DCON_REG_SCAN_INT, resumeline);
++
++err:
++	return rc;
++}
++
++/*
++ * The smbus doesn't always come back due to what is believed to be
++ * hardware (power rail) bugs.  For older models where this is known to
++ * occur, our solution is to attempt to wait for the bus to stabilize;
++ * if it doesn't happen, cut power to the dcon, repower it, and wait
++ * for the bus to stabilize.  Rinse, repeat until we have a working
++ * smbus.  For newer models, we simply BUG(); we want to know if this
++ * still happens despite the power fixes that have been made!
++ */
++static int dcon_bus_stabilize(struct i2c_client *client, int is_powered_down)
++{
++	unsigned long timeout;
++	int x;
++
++power_up:
++	if (is_powered_down) {
++		x = 1;
++		if ((x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0))) {
++			printk(KERN_WARNING "olpc-dcon:  unable to force dcon "
++					"to power up: %d!\n", x);
++			return x;
++		}
++		msleep(10); /* we'll be conservative */
++	}
++	
++	/*
++	 * According to HiMax, when powering the DCON up we should hold
++	 * SMB_DATA high for 8 SMB_CLK cycles.  This will force the DCON
++	 * state machine to reset to a (sane) initial state.  Mitch Bradley
++	 * did some testing and discovered that holding for 16 SMB_CLK cycles
++	 * worked a lot more reliably, so that's what we do here.
++	 *
++	 * According to the cs5536 spec, to set GPIO14 to SMB_CLK we must
++	 * simultaneously set AUX1 IN/OUT to GPIO14; ditto for SMB_DATA and
++	 * GPIO15.
++ 	 */
++	geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_VAL);
++	geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_ENABLE);
++	geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1);
++	geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX2);
++	geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1);
++
++	for (x = 0; x < 16; x++) {
++		udelay(5);
++		geode_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL);
++		udelay(5);
++		geode_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL);
++	}
++	udelay(5);
++	geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1);
++	geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1);
++
++	for (x = -1, timeout = 50; timeout && x < 0; timeout--) {
++		msleep(1);
++		x = dcon_read(DCON_REG_ID);
++	}
++	if (x < 0) {
++		printk(KERN_ERR "olpc-dcon:  unable to stabilize dcon's "
++				"smbus, reasserting power and praying.\n");
++		BUG_ON(olpc_board_at_least(olpc_board(0xc2)));
++		x = 0;
++		olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0);
++		msleep(100);
++		is_powered_down = 1;
++		goto power_up;	/* argh, stupid hardware.. */
++	}
++
++	if (is_powered_down)
++		return dcon_hw_init(client, 0);
++	return 0;
++}
++
++
++/* Backlight notes - turning off the backlight enable bit in the DCON
++ * doesn't save us any power over just pushing the BL to zero, so we
++ * don't use that bit in this code.
++ */
++
++static int dcon_get_backlight(void)
++{
++	if (dcon_client == NULL)
++		return 0;
++
++	if (bl_val == -1)
++		bl_val = dcon_read(DCON_REG_BRIGHT) & 0x0F;
++
++	return bl_val;
++}
++
++static void dcon_set_backlight(int level)
++{
++	if (dcon_client == NULL)
++		return;
++
++	if (bl_val == (level & 0x0F))
++		return;
++
++	bl_val = level & 0x0F;
++	dcon_write(DCON_REG_BRIGHT, bl_val);
++
++	/* Purposely turn off the backlight when we go to level 0 */
++
++	if (bl_val == 0) {
++	  dcon_disp_mode &= ~MODE_BL_ENABLE;
++	  dcon_write(DCON_REG_MODE, dcon_disp_mode);
++	}
++	else if (!(dcon_disp_mode & MODE_BL_ENABLE)) {
++	  dcon_disp_mode |= MODE_BL_ENABLE;
++	  dcon_write(DCON_REG_MODE, dcon_disp_mode);
++	}
++}
++
++/* Set the output type to either color or mono */
++
++static int dcon_set_output(int arg)
++{
++	if (dcon_output == arg)
++		return 0;
++
++	dcon_output = arg;
++
++	if (arg == DCON_OUTPUT_MONO) {
++		dcon_disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA);
++		dcon_disp_mode |= MODE_MONO_LUMA;
++	}
++	else {
++		dcon_disp_mode &= ~(MODE_MONO_LUMA);
++		dcon_disp_mode |= MODE_CSWIZZLE;
++		if (useaa)
++			dcon_disp_mode |= MODE_COL_AA;
++	}
++
++	dcon_write(DCON_REG_MODE, dcon_disp_mode);
++	return 0;
++}
++
++/* For now, this will be really stupid - we need to address how
++ * DCONLOAD works in a sleep and account for it accordingly
++ */
++
++static void dcon_sleep(int state)
++{
++	int x;
++
++	/* Turn off the backlight and put the DCON to sleep */
++
++	if (state == dcon_sleep_val)
++		return;
++
++	if (!olpc_board_at_least(olpc_board(0xc2)))
++		return;
++
++	if (state == DCON_SLEEP) {
++		x = 0;
++		if ((x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0)))
++			printk(KERN_WARNING "olpc-dcon:  unable to force dcon "
++					"to power down: %d!\n", x);
++		else
++			dcon_sleep_val = state;
++	}
++	else {
++		/* Only re-enable the backlight if the backlight value is set */
++		if (bl_val != 0)
++			dcon_disp_mode |= MODE_BL_ENABLE;
++
++		if ((x=dcon_bus_stabilize(dcon_client, 1)))
++			printk(KERN_WARNING "olpc-dcon:  unable to reinit dcon"
++					" hardware: %d!\n", x);
++		else
++			dcon_sleep_val = state;
++	}
++
++	/* We should turn off some stuff in the framebuffer - but what? */
++}
++
++/* Set the source of the display (CPU or DCON) */
++
++static void dcon_source_switch(struct work_struct *work)
++{
++	DECLARE_WAITQUEUE(wait, current);
++	int source = dcon_pending;
++
++	if (dcon_source == source)
++		return;
++
++	dcon_switched = 0;
++
++	switch (source) {
++	case DCON_SOURCE_CPU:
++
++		/* Enable the scanline interrupt bit */
++		if (dcon_write(DCON_REG_MODE, dcon_disp_mode | MODE_SCAN_INT))
++			printk(KERN_ERR "olpc-dcon:  couldn't enable scanline interrupt!\n");
++		else {
++			/* Wait up to one second for the scanline interrupt */
++			wait_event_timeout(dcon_wait_queue, dcon_switched == 1, HZ);
++		}
++
++		if (!dcon_switched)
++			printk(KERN_ERR "olpc-dcon:  Timeout entering CPU mode; expect a screen glitch.\n");
++
++		/*
++		 * Ideally we'd like to disable interrupts here so that the
++		 * fb unblanking and DCON turn on happen at a known time value;
++		 * however, we can't do that right now with fb_blank
++		 * messing with semaphores.
++		 *
++		 * For now, we just hope..
++		 */
++		acquire_console_sem();
++		if (fb_blank(fbinfo, FB_BLANK_UNBLANK)) {
++			release_console_sem();
++			printk(KERN_ERR "olpc-dcon:  Failed to enter CPU mode\n");
++			dcon_pending = DCON_SOURCE_DCON;
++			return;
++		}
++		release_console_sem();
++
++		/* And turn off the DCON */
++		outl(1<<11, gpio_base + GPIOx_OUT_VAL);
++
++		/* Turn off the scanline interrupt */
++		if (dcon_write(DCON_REG_MODE, dcon_disp_mode))
++			printk(KERN_ERR "olpc-dcon:  couldn't disable scanline interrupt!\n");
++
++		printk(KERN_INFO "olpc-dcon: The CPU has control\n");
++		break;
++	case DCON_SOURCE_DCON:
++	{
++		int t;
++
++		add_wait_queue(&dcon_wait_queue, &wait);
++		set_current_state(TASK_UNINTERRUPTIBLE);
++
++		/* Clear GPIO11 (DCONLOAD) - this implies that the DCON is in
++		   control */
++
++		outl(1 << (11 + 16), gpio_base + GPIOx_OUT_VAL);
++
++		t = schedule_timeout(HZ/2);
++		remove_wait_queue(&dcon_wait_queue, &wait);
++		set_current_state(TASK_RUNNING);
++
++		if (!dcon_switched)
++			printk(KERN_ERR "olpc-dcon: Timeout entering DCON mode; expect a screen glitch.\n");
++
++		acquire_console_sem();
++		if (fb_blank(fbinfo, FB_BLANK_POWERDOWN))
++			printk(KERN_ERR "olpc-dcon:  couldn't blank fb!\n");
++		release_console_sem();
++
++		printk(KERN_INFO "olpc-dcon: The DCON has control\n");
++		break;
++	}
++	default:
++		BUG();
++	}
++
++	dcon_source = source;
++}
++
++static DECLARE_WORK(dcon_work, dcon_source_switch);
++
++static int dcon_set_source(int arg)
++{
++	if (arg != DCON_SOURCE_CPU && arg != DCON_SOURCE_DCON)
++		return -EINVAL;
++
++	if (dcon_pending == arg)
++		return 0;
++
++	dcon_pending = arg;
++	if ((dcon_source != arg) && !work_pending(&dcon_work))
++		schedule_work(&dcon_work);
++
++	return 0;
++}
++
++static int dcon_set_source_sync(int arg)
++{
++	int ret = dcon_set_source(arg);
++	if (!ret)
++		flush_scheduled_work();
++	return ret;
++}
++
++static int dconbl_set(struct backlight_device *dev) {
++
++	int level = dev->props.brightness;
++
++	if (dev->props.power != FB_BLANK_UNBLANK)
++		level = 0;
++
++	dcon_set_backlight(level);
++	return 0;
++}
++
++static int dconbl_get(struct backlight_device *dev) {
++	return dcon_get_backlight();
++}
++
++static ssize_t dcon_mode_show(struct device *dev,
++	struct device_attribute *attr, char *buf)
++{
++	return sprintf(buf, "%4.4X\n", dcon_disp_mode);
++}
++
++static ssize_t dcon_sleep_show(struct device *dev,
++	struct device_attribute *attr, char *buf)
++{
++	return sprintf(buf, "%d\n", dcon_sleep_val);
++}
++
++static ssize_t /* __deprecated */ dcon_source_show(struct device *dev,
++	struct device_attribute *attr, char *buf)
++{
++	printk(KERN_WARNING "olpc-dcon:  using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
++	return sprintf(buf, "%d\n", dcon_source);
++}
++
++static ssize_t dcon_freeze_show(struct device *dev,
++	struct device_attribute *attr, char *buf)
++{
++	return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0);
++}
++
++static ssize_t dcon_output_show(struct device *dev,
++	struct device_attribute *attr, char *buf)
++{
++	return sprintf(buf, "%d\n", dcon_output);
++}
++
++static ssize_t dcon_resumeline_show(struct device *dev,
++	struct device_attribute *attr, char *buf)
++{
++	return sprintf(buf, "%d\n", resumeline);
++}
++
++static int _strtoul(const char *buf, int len, unsigned int *val)
++{
++
++	char *endp;
++	unsigned int output = simple_strtoul(buf, &endp, 0);
++	int size = endp - buf;
++
++	if (*endp && isspace(*endp))
++		size++;
++
++	if (size != len)
++		return -EINVAL;
++
++	*val = output;
++	return 0;
++}
++
++static ssize_t dcon_output_store(struct device *dev,
++	struct device_attribute *attr, const char *buf, size_t count)
++{
++	int output;
++	int rc = -EINVAL;
++
++	if (_strtoul(buf, count, &output))
++		return -EINVAL;
++
++	if (output == DCON_OUTPUT_COLOR || output == DCON_OUTPUT_MONO) {
++		dcon_set_output(output);
++		rc = count;
++	}
++
++	return rc;
++}
++
++static ssize_t /* __deprecated */ dcon_source_store(struct device *dev,
++	struct device_attribute *attr, const char *buf, size_t count)
++{
++	int output;
++	int rc = -EINVAL;
++
++	printk(KERN_WARNING "olpc-dcon:  using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
++	if (_strtoul(buf, count, &output))
++		return -EINVAL;
++
++	dcon_set_source(output);
++	rc = count;
++
++	return rc;
++}
++
++static ssize_t dcon_freeze_store(struct device *dev,
++	struct device_attribute *attr, const char *buf, size_t count)
++{
++	int output;
++	int rc = -EINVAL;
++
++	if (_strtoul(buf, count, &output))
++		return rc;
++
++	dcon_set_source(output ? DCON_SOURCE_DCON : DCON_SOURCE_CPU);
++	rc = count;
++
++	return rc;
++}
++
++static ssize_t dcon_resumeline_store(struct device *dev,
++	struct device_attribute *attr, const char *buf, size_t count)
++{
++	int rl;
++	int rc = -EINVAL;
++
++	if (_strtoul(buf, count, &rl))
++		return rc;
++
++	resumeline = rl;
++	dcon_write(DCON_REG_SCAN_INT, resumeline);
++	rc = count;
++
++	return rc;
++}
++
++static ssize_t dcon_sleep_store(struct device *dev,
++	struct device_attribute *attr, const char *buf, size_t count)
++{
++	int output;
++
++	if (_strtoul(buf, count, &output))
++		return -EINVAL;
++
++	dcon_sleep(output ? DCON_SLEEP : DCON_ACTIVE);
++	return count;
++}
++
++static struct device_attribute dcon_device_files[] = {
++	__ATTR(mode, 0444, dcon_mode_show, NULL),
++	__ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store),
++	__ATTR(source, 0644, dcon_source_show, dcon_source_store),
++	__ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store),
++	__ATTR(output, 0644, dcon_output_show, dcon_output_store),
++	__ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store),
++};
++
++static struct backlight_ops dcon_bl_ops = {
++	.get_brightness = dconbl_get,
++	.update_status = dconbl_set
++};
++
++/* List of GPIOs that we care about:
++   (in)  GPIO12   -- DCONBLNK
++   (in)  GPIO[56] -- DCONSTAT[01]
++   (out) GPIO11   -- DCONLOAD
++*/
++
++#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12))
++#define OUT_GPIOS (1<<11)
++
++static irqreturn_t dcon_interrupt(int, void *);
++
++static int dcon_request_irq(void)
++{
++	unsigned long lo, hi;
++	unsigned char lob;
++
++	rdmsr(MSR_LBAR_GPIO, lo, hi);
++
++	/* Check the mask and whether GPIO is enabled (sanity check) */
++	if (hi != 0x0000f001) {
++		printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n");
++		return -ENODEV;
++	}
++
++	/* Mask off the IO base address */
++	gpio_base = lo & 0x0000ff00;
++
++	/* Turn off the event enable for GPIO7 just to be safe */
++	outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN);
++
++	/* Set the directions for the GPIO pins */
++	outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN);
++	outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN);
++
++	/* Set up the interrupt mappings */
++
++	/* Set the IRQ to pair 2 */
++	geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2);
++
++	/* Enable group 2 to trigger the DCON interrupt */
++	geode_gpio_set_irq(2, DCON_IRQ);
++
++	/* Select edge level for interrupt (in PIC) */
++
++	lob = inb(0x4d0);
++	lob &= ~(1 << DCON_IRQ);
++	outb(lob, 0x4d0);
++
++	/* Register the interupt handler */
++	if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver))
++		return -EIO;
++
++	/* Clear INV_EN for GPIO7 (DCONIRQ) */
++	outl((1<<(16+7)), gpio_base + GPIOx_INV_EN);
++
++	/* Enable filter for GPIO12 (DCONBLANK) */
++	outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN);
++
++	/* Disable filter for GPIO7 */
++	outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN);
++
++	/* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
++
++	outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN);
++	outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN);
++
++	/* Add GPIO12 to the Filter Event Pair #7 */
++	outb(12, gpio_base + GPIO_FE7_SEL);
++
++	/* Turn off negative Edge Enable for GPIO12 */
++	outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN);
++
++	/* Enable negative Edge Enable for GPIO7 */
++	outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN);
++
++	/* Zero the filter amount for Filter Event Pair #7 */
++	outw(0, gpio_base + GPIO_FLT7_AMNT);
++
++	/* Clear the negative edge status for GPIO7 and GPIO12 */
++	outl((1<<7) | (1<<12), gpio_base+0x4c);
++
++	/* FIXME:  Clear the posiitive status as well, just to be sure */
++	outl((1<<7) | (1<<12), gpio_base+0x48);
++
++	/* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
++	outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN);
++
++	/* Determine the current state by reading the GPIO bit */
++	/* Earlier stages of the boot process have established the state */
++	dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11)
++		? DCON_SOURCE_CPU
++		: DCON_SOURCE_DCON;
++	dcon_pending = dcon_source;
++
++	return 0;
++}
++
++static int dcon_reboot_notify(struct notifier_block *nb, unsigned long foo, void *bar)
++{
++	if (dcon_client == NULL)
++		return 0;
++
++	/* Turn off the DCON. Entirely. */
++	dcon_write(DCON_REG_MODE, 0x39);
++	dcon_write(DCON_REG_MODE, 0x32);
++	return 0;
++}
++
++static int dcon_conswitch_notify(struct notifier_block *nb,
++				 unsigned long mode, void *dummy)
++{
++	if (mode == CONSOLE_EVENT_SWITCH_TEXT)
++		dcon_sleep(DCON_ACTIVE);
++
++	return 0;
++}
++
++static struct notifier_block dcon_nb = {
++	.notifier_call = dcon_reboot_notify,
++	.priority = -1,
++};
++
++static struct notifier_block dcon_console_nb = {
++	.notifier_call = dcon_conswitch_notify,
++	.priority = -1,
++};
++
++static int unfreeze_on_panic(struct notifier_block *nb, unsigned long e, void *p)
++{
++	outl(1<<11, gpio_base + GPIOx_OUT_VAL);
++	return NOTIFY_DONE;
++}
++
++static struct notifier_block dcon_panic_nb = {
++	.notifier_call = unfreeze_on_panic,
++};
++
++static int dcon_probe(struct i2c_adapter *adap, int addr, int kind)
++{
++	struct i2c_client *client;
++	int rc, i;
++
++	if (!olpc_has_dcon()) {
++		printk("olpc-dcon:  No DCON is attached.\n");
++		return -ENODEV;
++	}
++
++	if (num_registered_fb >= 1)
++		fbinfo = registered_fb[0];
++
++	if (adap->id != I2C_HW_SMBUS_SCX200) {
++		printk(KERN_ERR "olpc-dcon: Invalid I2C bus (%d not %d)\n",
++		       adap->id, I2C_HW_SMBUS_SCX200);
++		return -ENXIO;
++	}
++
++	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
++	if (client == NULL)
++		return -ENOMEM;
++
++	strncpy(client->name, "OLPC-DCON", I2C_NAME_SIZE);
++	client->addr = addr;
++	client->adapter = adap;
++	client->driver = &dcon_driver;
++
++	if ((rc = i2c_attach_client(client)) != 0) {
++		printk(KERN_ERR "olpc-dcon: Unable to attach the I2C client.\n");
++		goto eclient;
++	}
++
++	rc = dcon_hw_init(client, 1);
++	if (rc)
++		goto ei2c;
++
++	/* Add the DCON device */
++
++	dcon_device = platform_device_alloc("dcon", -1);
++
++	if (dcon_device == NULL) {
++		printk(KERN_ERR "dcon:  Unable to create the DCON device\n");
++		rc = -ENOMEM;
++		goto eirq;
++	}
++
++	if ((rc = platform_device_add(dcon_device))) {
++		printk(KERN_ERR "dcon:  Unable to add the DCON device\n");
++		goto edev;
++	}
++
++	for(i = 0; i < ARRAY_SIZE(dcon_device_files); i++)
++		device_create_file(&dcon_device->dev, &dcon_device_files[i]);
++
++	/* Add the backlight device for the DCON */
++
++	dcon_client = client;
++
++	dcon_bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev,
++		NULL, &dcon_bl_ops);
++
++	if (IS_ERR(dcon_bl_dev)) {
++		printk(KERN_INFO "Could not register the backlight device for the DCON (%ld)\n", PTR_ERR(dcon_bl_dev));
++		dcon_bl_dev = NULL;
++	}
++	else {
++		dcon_bl_dev->props.max_brightness = 15;
++		dcon_bl_dev->props.power = FB_BLANK_UNBLANK;
++		dcon_bl_dev->props.brightness = dcon_get_backlight();
++
++		backlight_update_status(dcon_bl_dev);
++	}
++
++	register_reboot_notifier(&dcon_nb);
++	console_event_register(&dcon_console_nb);
++	atomic_notifier_chain_register(&panic_notifier_list, &dcon_panic_nb);
++
++	return 0;
++
++ edev:
++	platform_device_unregister(dcon_device);
++	dcon_device = NULL;
++ eirq:
++	free_irq(DCON_IRQ, &dcon_driver);
++ ei2c:
++	i2c_detach_client(client);
++ eclient:
++	kfree(client);
++
++	return rc;
++}
++
++static int dcon_attach(struct i2c_adapter *adap)
++{
++	int ret;
++
++	ret = i2c_probe(adap, &addr_data, dcon_probe);
++
++	if (dcon_client == NULL)
++		printk(KERN_ERR "olpc-dcon: No DCON found on SMBus\n");
++
++	return ret;
++}
++
++static int dcon_detach(struct i2c_client *client)
++{
++	int rc;
++	dcon_client = NULL;
++
++	unregister_reboot_notifier(&dcon_nb);
++	console_event_unregister(&dcon_console_nb);
++	atomic_notifier_chain_unregister(&panic_notifier_list, &dcon_panic_nb);
++
++	free_irq(DCON_IRQ, &dcon_driver);
++
++	if ((rc = i2c_detach_client(client)) == 0)
++		kfree(i2c_get_clientdata(client));
++
++	if (dcon_bl_dev != NULL)
++		backlight_device_unregister(dcon_bl_dev);
++
++	if (dcon_device != NULL)
++		platform_device_unregister(dcon_device);
++	cancel_work_sync(&dcon_work);
++
++	return rc;
++}
++
++
++#ifdef CONFIG_PM
++static int dcon_suspend(struct i2c_client *client, pm_message_t state)
++{
++	if (dcon_sleep_val != DCON_ACTIVE)
++		return 0;
++
++	/* Set up the DCON to have the source */
++	return dcon_set_source_sync(DCON_SOURCE_DCON);
++}
++
++static int dcon_resume(struct i2c_client *client)
++{
++	if (dcon_sleep_val != DCON_ACTIVE)
++		return 0;
++
++	dcon_bus_stabilize(client, 0);
++
++	return dcon_set_source(DCON_SOURCE_CPU);
++}
++
++#endif
++
++static irqreturn_t dcon_interrupt(int irq, void *id)
++{
++	int status = inl(gpio_base + GPIOx_READ_BACK) >> 5;
++
++	/* Clear the negative edge status for GPIO7 */
++	outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS);
++
++	switch (status & 3) {
++	case 3:
++		printk(KERN_DEBUG "olpc-dcon: DCONLOAD_MISSED interrupt\n");
++		break;
++	case 2:	/* switch to DCON mode */
++	case 1: /* switch to CPU mode */
++		dcon_switched = 1;
++		wake_up(&dcon_wait_queue);
++		break;
++	case 0:
++		printk(KERN_DEBUG "olpc-dcon: scanline interrupt w/CPU\n");
++	}
++
++	return IRQ_HANDLED;
++}
++
++static struct i2c_driver dcon_driver = {
++	.driver = {
++		.name	= "OLPC-DCON",
++	},
++	.id = I2C_DRIVERID_DCON,
++	.attach_adapter = dcon_attach,
++	.detach_client = dcon_detach,
++#ifdef CONFIG_PM
++	.suspend = dcon_suspend,
++	.resume = dcon_resume,
++#endif
++};
++
++
++static int __init olpc_dcon_init(void)
++{
++	i2c_add_driver(&dcon_driver);
++	return 0;
++}
++
++static void __exit olpc_dcon_exit(void)
++{
++	i2c_del_driver(&dcon_driver);
++}
++
++module_init(olpc_dcon_init);
++module_exit(olpc_dcon_exit);
++
++MODULE_LICENSE("GPL");
+Binary files linux_2.6.24_org/drivers/video/.olpc_dcon.c.swp and linux_2.6.24_olpc/drivers/video/.olpc_dcon.c.swp differ
+diff -purN linux_2.6.24_org/drivers/video/olpc_dcon.h linux_2.6.24_olpc/drivers/video/olpc_dcon.h
+--- linux_2.6.24_org/drivers/video/olpc_dcon.h	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/video/olpc_dcon.h	2008-02-15 18:58:35.000000000 +0000
+@@ -0,0 +1,75 @@
++#ifndef OLPC_DCON_H_
++#define OLPC_DCON_H_
++
++/* DCON registers */
++
++#define DCON_REG_ID		 0
++#define DCON_REG_MODE		 1
++
++#define MODE_PASSTHRU	(1<<0)
++#define MODE_SLEEP	(1<<1)
++#define MODE_SLEEP_AUTO	(1<<2)
++#define MODE_BL_ENABLE	(1<<3)
++#define MODE_BLANK	(1<<4)
++#define MODE_CSWIZZLE	(1<<5)
++#define MODE_COL_AA	(1<<6)
++#define MODE_MONO_LUMA	(1<<7)
++#define MODE_SCAN_INT	(1<<8)
++#define MODE_CLOCKDIV	(1<<9)
++#define MODE_DEBUG	(1<<14)
++#define MODE_SELFTEST	(1<<15)
++
++#define DCON_REG_HRES		2
++#define DCON_REG_HTOTAL		3
++#define DCON_REG_HSYNC_WIDTH	4
++#define DCON_REG_VRES		5
++#define DCON_REG_VTOTAL		6
++#define DCON_REG_VSYNC_WIDTH	7
++#define DCON_REG_TIMEOUT	8
++#define DCON_REG_SCAN_INT	9
++#define DCON_REG_BRIGHT		10
++
++/* GPIO registers (CS5536) */
++
++#define MSR_LBAR_GPIO		0x5140000C
++
++#define GPIOx_OUT_VAL     0x00
++#define GPIOx_OUT_EN      0x04
++#define GPIOx_IN_EN       0x20
++#define GPIOx_INV_EN      0x24
++#define GPIOx_IN_FLTR_EN  0x28
++#define GPIOx_EVNTCNT_EN  0x2C
++#define GPIOx_READ_BACK   0x30
++#define GPIOx_EVNT_EN     0x38
++#define GPIOx_NEGEDGE_EN  0x44
++#define GPIOx_NEGEDGE_STS 0x4C
++#define GPIO_FLT7_AMNT    0xD8
++#define GPIO_MAP_X        0xE0
++#define GPIO_MAP_Y        0xE4
++#define GPIO_FE7_SEL      0xF7
++
++
++/* Status values */
++
++#define DCONSTAT_SCANINT	0
++#define DCONSTAT_SCANINT_DCON	1
++#define DCONSTAT_DISPLAYLOAD	2
++#define DCONSTAT_MISSED		3
++
++/* Source values */
++
++#define DCON_SOURCE_DCON        0
++#define DCON_SOURCE_CPU         1
++
++/* Output values */
++#define DCON_OUTPUT_COLOR       0
++#define DCON_OUTPUT_MONO        1
++
++/* Sleep values */
++#define DCON_ACTIVE             0
++#define DCON_SLEEP              1
++
++/* Interrupt */
++#define DCON_IRQ                6
++
++#endif
+diff -purN linux_2.6.24_org/fs/jffs2/nodelist.h linux_2.6.24_olpc/fs/jffs2/nodelist.h
+--- linux_2.6.24_org/fs/jffs2/nodelist.h	2008-02-15 20:10:35.000000000 +0000
++++ linux_2.6.24_olpc/fs/jffs2/nodelist.h	2008-02-15 18:57:39.000000000 +0000
+@@ -197,7 +197,7 @@ struct jffs2_inode_cache {
+ #define RAWNODE_CLASS_XATTR_DATUM	1
+ #define RAWNODE_CLASS_XATTR_REF		2
+ 
+-#define INOCACHE_HASHSIZE 128
++#define INOCACHE_HASHSIZE 1024
+ 
+ #define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size)
+ 
+diff -purN linux_2.6.24_org/fs/Kconfig linux_2.6.24_olpc/fs/Kconfig
+--- linux_2.6.24_org/fs/Kconfig	2008-02-15 20:10:31.000000000 +0000
++++ linux_2.6.24_olpc/fs/Kconfig	2008-02-15 18:57:33.000000000 +0000
+@@ -1031,6 +1031,37 @@ config HUGETLBFS
+ config HUGETLB_PAGE
+ 	def_bool HUGETLBFS
+ 
++config PROMFS_FS
++	tristate "PromFS IEEE 1275 file system support"
++	depends on SPARC || PPC || OLPC
++	help
++	  PromFS is a file system interface to various IEEE-1275 compatible
++	  firmwares.  If you have such a firmware (Sparc64, PowerPC, and
++	  some other architectures and embedded systems have such firmwares,
++	  with names like "OpenBoot (tm)" and "OpenFirmware"), say Y here
++	  to be able to access the firmware's device-tree from Linux.
++
++	  The firmware device-tree is available as a virtual file system,
++	  can be mounted under /prom with the command "mount -t promfs
++	  none /prom".
++
++	  To compile PromFS support as a module, choose M here; the module
++	  will be called promfs.  If unsure, choose M.
++
++config RAMFS
++	bool
++	default y
++	---help---
++	  Ramfs is a file system which keeps all files in RAM. It allows
++	  read and write access.
++
++	  It is more of an programming example than a useable file system.  If
++	  you need a file system which lives in RAM with limit checking use
++	  tmpfs.
++
++	  To compile this as a module, choose M here: the module will be called
++	  ramfs.
++
+ config CONFIGFS_FS
+ 	tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)"
+ 	depends on SYSFS && EXPERIMENTAL
+diff -purN linux_2.6.24_org/fs/Makefile linux_2.6.24_olpc/fs/Makefile
+--- linux_2.6.24_org/fs/Makefile	2008-02-15 20:10:33.000000000 +0000
++++ linux_2.6.24_olpc/fs/Makefile	2008-02-15 18:57:34.000000000 +0000
+@@ -110,6 +110,7 @@ obj-$(CONFIG_ADFS_FS)		+= adfs/
+ obj-$(CONFIG_FUSE_FS)		+= fuse/
+ obj-$(CONFIG_UDF_FS)		+= udf/
+ obj-$(CONFIG_SUN_OPENPROMFS)	+= openpromfs/
++obj-$(CONFIG_PROMFS_FS)		+= promfs/
+ obj-$(CONFIG_JFS_FS)		+= jfs/
+ obj-$(CONFIG_XFS_FS)		+= xfs/
+ obj-$(CONFIG_9P_FS)		+= 9p/
+diff -purN linux_2.6.24_org/fs/promfs/Makefile linux_2.6.24_olpc/fs/promfs/Makefile
+--- linux_2.6.24_org/fs/promfs/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/fs/promfs/Makefile	2008-02-15 18:57:33.000000000 +0000
+@@ -0,0 +1 @@
++obj-$(CONFIG_PROMFS_FS) += promfs.o
+diff -purN linux_2.6.24_org/fs/promfs/promfs.c linux_2.6.24_olpc/fs/promfs/promfs.c
+--- linux_2.6.24_org/fs/promfs/promfs.c	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/fs/promfs/promfs.c	2008-02-15 18:57:33.000000000 +0000
+@@ -0,0 +1,295 @@
++/*
++ * promfs.c - generic inode/dentry functions for IEEE 1275-based filesystems.
++ *
++ * This is based heavily upon prior ieee1275 and other virtual filesystems
++ * implementations; openpromfs, proc_devtree.c, oprofilefs, procfs, ...
++ * 
++ * Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/pagemap.h>
++#include <linux/fs.h>
++//#include <linux/promfs.h>
++#include <asm/prom.h>
++
++#define PROMFS_MAGIC 0x1f2f3fff
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andres Salomon");
++
++struct promfs_inode
++{
++	struct inode ino;
++	struct property *prop;
++};
++
++static inline struct promfs_inode *to_promfs_inode(struct inode *inode)
++{
++	return container_of(inode, struct promfs_inode, ino);
++}
++
++#if 0
++static DEFINE_SPINLOCK(promfs_lock);
++
++static struct of_node *of_tree = NULL;
++static DEFINE_RWLOCK(of_tree_lock);
++
++void __init of_build_tree(void)
++{
++
++
++}
++#endif
++
++static int promfs_open_file(struct inode *inode, struct file *file)
++{
++	struct promfs_inode *ino;
++
++	ino = to_promfs_inode(inode);
++	if (!ino->prop)
++		return -EIO;
++	file->private_data = ino->prop;
++
++	return 0;
++}
++
++static ssize_t promfs_read_file(struct file *file, char __user *data,
++		size_t len, loff_t *ppos)
++{
++	struct property *prop = (struct property *) file->private_data;
++	return simple_read_from_buffer(data, len, ppos, prop->value,
++			prop->length);
++}
++
++static ssize_t promfs_write_file(struct file *file, char const __user *buf,
++		size_t count, loff_t * offset)
++{
++	/* TODO.... 'cause, y'know, it would be nice. */
++	return -EIO;
++}
++
++static struct file_operations promfs_file_ops = {
++	.open = promfs_open_file,
++	.read = promfs_read_file,
++	.write = promfs_write_file,
++};
++
++static struct kmem_cache *promfs_inode_cachep;
++
++static struct inode *promfs_alloc_inode(struct super_block *sb)
++{
++	struct promfs_inode *pr_ino;
++
++	pr_ino = kmem_cache_alloc(promfs_inode_cachep, GFP_KERNEL);
++	if (!pr_ino)
++		return NULL;
++	pr_ino->prop = NULL;
++
++	return &pr_ino->ino;
++}
++
++static void promfs_destroy_inode(struct inode *inode)
++{
++	kmem_cache_free(promfs_inode_cachep, to_promfs_inode(inode));
++}
++
++static void promfs_read_inode(struct inode *inode)
++{
++	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
++}
++
++static int promfs_remount(struct super_block *sb, int *flags, char *data)
++{
++	*flags |= MS_NOATIME;
++	return 0;
++}
++
++static struct super_operations promfs_s_ops = {
++	.alloc_inode = promfs_alloc_inode,
++	.destroy_inode = promfs_destroy_inode,
++	.read_inode = promfs_read_inode,
++	.statfs = simple_statfs,
++	.drop_inode = generic_delete_inode,
++	.remount_fs = promfs_remount,
++};
++
++static struct inode *promfs_get_inode(struct super_block *sb, int mode)
++{
++	struct inode *inode = new_inode(sb);
++
++	if (inode) {
++		inode->i_mode = mode;
++		inode->i_uid = 0;
++		inode->i_gid = 0;
++		inode->i_blocks = 0;
++		inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
++	}
++
++	return inode;
++}
++
++static int promfs_create_file(struct super_block *sb, struct dentry *root,
++		struct property *prop, const struct file_operations *fops)
++{
++	struct dentry *dentry;
++	struct inode *inode;
++	struct promfs_inode *ino;
++
++	dentry = d_alloc_name(root, prop->name);
++	if (!dentry)
++		goto err;
++
++	inode = promfs_get_inode(sb, S_IFREG | 0644);
++	if (!inode)
++		goto err_dput;
++	inode->i_fop = fops;
++	ino = to_promfs_inode(inode);
++	ino->prop = prop;
++	d_add(dentry, inode);
++
++	return 0;
++
++err_dput:
++	dput(dentry);
++err:
++	return -EFAULT;
++}
++
++struct dentry *promfs_create_dir(struct super_block *sb, struct dentry *root,
++		char const *name)
++{
++	struct dentry *dentry;
++	struct inode *inode;
++
++	dentry = d_alloc_name(root, name);
++	if (!dentry)
++		goto err;
++
++	inode = promfs_get_inode(sb, S_IFDIR | 0755);
++	if (!inode)
++		goto err_dput;
++	inode->i_op = &simple_dir_inode_operations;
++	inode->i_fop = &simple_dir_operations;
++	d_add(dentry, inode);
++	return dentry;
++
++err_dput:
++	dput(dentry);
++err:
++	return NULL;
++}
++
++void promfs_populate(struct super_block *sb, struct dentry *root,
++		struct device_node *node)
++{
++	struct dentry *dentry;
++	struct device_node *child;
++	struct property *prop;
++
++	if (!node)
++		return;
++
++	for (child = node->child; child; child = child->sibling) {
++		dentry = promfs_create_dir(sb, root, child->path_component_name);
++		promfs_populate(sb, dentry, child);
++	}
++	for (prop = node->properties; prop; prop = prop->next)
++		promfs_create_file(sb, root, prop, &promfs_file_ops);
++}
++
++static int promfs_fill_super(struct super_block *sb, void *data, int silent)
++{
++	struct inode *root_inode;
++	struct dentry *root_dentry;
++	struct promfs_inode *inode;
++
++	sb->s_blocksize = PAGE_CACHE_SIZE;
++	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
++	sb->s_magic = PROMFS_MAGIC;
++	sb->s_op = &promfs_s_ops;
++	sb->s_time_gran = 1;
++	sb->s_flags |= MS_NOATIME;
++
++	root_inode = promfs_get_inode(sb, S_IFDIR | 0755);
++	if (!root_inode)
++		goto err;
++	root_inode->i_op = &simple_dir_inode_operations;
++	root_inode->i_fop = &simple_dir_operations;
++
++	inode = to_promfs_inode(root_inode);
++
++	root_dentry = d_alloc_root(root_inode);
++	if (!root_dentry)
++		goto err_iput;
++	sb->s_root = root_dentry;
++
++	promfs_populate(sb, root_dentry, of_find_node_by_path("/"));
++	return 0;
++
++err_iput:
++	iput(root_inode);
++err:
++	return -ENOMEM;
++}
++
++static int promfs_get_sb(struct file_system_type *fs_type, int flags,
++		const char *dev_name, void *data, struct vfsmount *mnt)
++{
++	return get_sb_single(fs_type, flags, data, promfs_fill_super, mnt);
++}
++
++static struct file_system_type promfs_fs_type = {
++	.owner = THIS_MODULE,
++	.name = "promfs",
++	.get_sb = promfs_get_sb,
++	.kill_sb = kill_litter_super,
++};
++
++static void init_once(void *i, struct kmem_cache *cachep, unsigned long fl)
++{
++	struct promfs_inode *inode = (struct promfs_inode *) i;
++	inode_init_once(&inode->ino);
++}
++
++static int __init init_promfs(void)
++{
++	int err;
++
++	prom_build_devicetree();
++	promfs_inode_cachep = kmem_cache_create("promfs_inode_cache",
++			sizeof(struct promfs_inode), 0,
++			SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD, init_once, NULL);
++	if (!promfs_inode_cachep)
++		return -ENOMEM;
++
++	err = register_filesystem(&promfs_fs_type);
++	if (err)
++		kmem_cache_destroy(promfs_inode_cachep);
++		
++	return err;
++}
++
++static void __exit exit_promfs(void)
++{
++	unregister_filesystem(&promfs_fs_type);
++	kmem_cache_destroy(promfs_inode_cachep);
++}
++
++module_init(init_promfs);
++module_exit(exit_promfs);
+diff -purN linux_2.6.24_org/include/asm-x86/ofw.h linux_2.6.24_olpc/include/asm-x86/ofw.h
+--- linux_2.6.24_org/include/asm-x86/ofw.h	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/include/asm-x86/ofw.h	2008-02-15 18:57:59.000000000 +0000
+@@ -0,0 +1,16 @@
++/*
++ * Definitions for Open Firmware client interface on 32-bit system.
++ * OF Cell size is 4. Integer properties are encoded big endian,
++ * as with all OF implementations.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++#ifndef _OFW_H
++#define _OFW_H
++
++extern int ofw(char *, int, int, ...); 
++
++#endif
+diff -purN linux_2.6.24_org/include/asm-x86/olpc.h linux_2.6.24_olpc/include/asm-x86/olpc.h
+--- linux_2.6.24_org/include/asm-x86/olpc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/include/asm-x86/olpc.h	2008-02-15 18:57:59.000000000 +0000
+@@ -0,0 +1,107 @@
++/* OLPC machine specific definitions */
++
++#ifndef ASM_OLPC_H_
++#define ASM_OLPC_H_
++
++#include <asm/geode.h>
++
++struct olpc_platform_t {
++	int flags;
++	u32 boardrev;
++	int ecver;
++};
++
++#define OLPC_F_PRESENT 0x01
++#define OLPC_F_DCON    0x02
++#define OLPC_F_VSA     0x04
++
++/*
++ * OLPC board IDs contain the major build number within the mask 0x0ff0,
++ * and the minor build number withing 0x000f.  Pre-builds have a minor
++ * number less than 8, and normal builds start at 8.  For example, 0x0B10
++ * is a PreB1, and 0x0C18 is a C1.
++ */
++
++static inline u32 olpc_board(u8 id)
++{
++	return (id << 4) | 0x8;
++}
++
++static inline u32 olpc_board_pre(u8 id)
++{
++	return id << 4;
++}
++
++#ifndef CONFIG_OLPC
++
++static inline int machine_is_olpc(void) { return 0; }
++static inline int olpc_has_dcon(void) { return 0; }
++static inline int olpc_has_vsa(void) { return 0; }
++
++#else
++
++extern struct olpc_platform_t olpc_platform_info;
++
++static inline int
++machine_is_olpc(void)
++{
++	return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
++}
++
++static inline int
++olpc_has_dcon(void)
++{
++	return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
++}
++
++static inline int
++olpc_has_vsa(void)
++{
++	return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
++}
++
++static inline int olpc_board_at_least(u32 rev)
++{
++	return olpc_platform_info.boardrev >= rev;
++}
++
++#endif
++
++/* EC functions */
++
++int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
++		unsigned char *outbuf, size_t outlen);
++
++void olpc_register_battery_callback(void (*f)(unsigned long));
++void olpc_deregister_battery_callback(void);
++
++/* EC commands and responses */
++
++/* SCI source values */
++
++#define EC_SCI_SRC_EMPTY   0x00
++#define EC_SCI_SRC_GAME    0x01
++#define EC_SCI_SRC_BATTERY 0x02
++#define EC_SCI_SRC_BATSOC  0x04
++#define EC_SCI_SRC_BATERR  0x08
++#define EC_SCI_SRC_EBOOK   0x10
++#define EC_SCI_SRC_WLAN    0x20
++#define EC_SCI_SRC_ACPWR   0x40
++#define EC_SCI_SRC_ALL     0x7F
++
++int olpc_ec_mask_set(u8 bits);
++int olpc_ec_mask_unset(u8 bits);
++
++/* GPIO assignments */
++
++#define OLPC_GPIO_MIC_AC     (1 << 1)
++#define OLPC_GPIO_DCON_IRQ   (1 << 7)
++#define OLPC_GPIO_THRM_ALRM  (1 << 10)
++#define OLPC_GPIO_SMB_CLK    (1 << 14)
++#define OLPC_GPIO_SMB_DATA   (1 << 15)
++#define OLPC_GPIO_WORKAUX    (1 << 24)
++#define OLPC_GPIO_LID        (1 << 26)
++#define OLPC_GPIO_ECSCI      (1 << 27)
++
++#endif
++
+diff -purN linux_2.6.24_org/include/asm-x86/prom.h linux_2.6.24_olpc/include/asm-x86/prom.h
+--- linux_2.6.24_org/include/asm-x86/prom.h	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/include/asm-x86/prom.h	2008-02-15 18:57:59.000000000 +0000
+@@ -0,0 +1,108 @@
++#ifndef _I386_PROM_H
++#define _I386_PROM_H
++#ifdef __KERNEL__
++
++
++/*
++ * Definitions for talking to the Open Firmware PROM on
++ * Power Macintosh computers.
++ *
++ * Copyright (C) 1996-2005 Paul Mackerras.
++ *
++ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
++ * Updates for SPARC64 by David S. Miller
++ * Updates for i386/OLPC by Andres Salomon
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/types.h>
++#include <linux/proc_fs.h>
++#include <asm/atomic.h>
++
++typedef u32 phandle;
++typedef u32 ihandle;
++
++struct property {
++	char	*name;
++	int	length;
++	void	*value;
++	struct property *next;
++};
++
++struct device_node {
++	const char	*name;
++	const char	*type;
++	phandle	node;
++//        phandle linux_phandle;
++	char	*path_component_name;
++	char	*full_name;
++
++	struct	property *properties;
++	struct  property *deadprops; /* removed properties */
++	struct	device_node *parent;
++	struct	device_node *child;
++	struct	device_node *sibling;
++	struct	device_node *next;	/* next device of same type */
++	struct	device_node *allnext;	/* next in list of all nodes */
++	struct  proc_dir_entry *pde;	/* this node's proc directory */
++	struct  kref kref;
++	unsigned long _flags;
++	void	*data;
++};
++
++/* flag descriptions */
++#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
++
++#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
++#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
++
++#define OF_BAD_ADDR	((u64)-1)
++
++static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
++{
++	dn->pde = de;
++}
++
++extern struct device_node *of_find_node_by_name(struct device_node *from,
++	const char *name);
++#define for_each_node_by_name(dn, name) \
++	for (dn = of_find_node_by_name(NULL, name); dn; \
++	     dn = of_find_node_by_name(dn, name))
++extern struct device_node *of_find_node_by_type(struct device_node *from,
++	const char *type);
++#define for_each_node_by_type(dn, type) \
++	for (dn = of_find_node_by_type(NULL, type); dn; \
++	     dn = of_find_node_by_type(dn, type))
++extern struct device_node *of_find_compatible_node(struct device_node *from,
++	const char *type, const char *compat);
++extern struct device_node *of_find_node_by_path(const char *path);
++extern struct device_node *of_find_node_by_phandle(phandle handle);
++extern struct device_node *of_get_parent(const struct device_node *node);
++extern struct device_node *of_get_next_child(const struct device_node *node,
++					     struct device_node *prev);
++extern struct property *of_find_property(const struct device_node *np,
++					 const char *name,
++					 int *lenp);
++//extern struct device_node *of_node_get(struct device_node *node);
++//extern void of_node_put(struct device_node *node);
++extern int of_device_is_compatible(const struct device_node *device,
++				   const char *);
++extern const void *of_get_property(const struct device_node *node,
++			     const char *name,
++			     int *lenp);
++#define get_property(node,name,lenp) of_get_property(node,name,lenp)
++extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
++extern int of_getintprop_default(struct device_node *np,
++				 const char *name,
++				 int def);
++extern int of_n_addr_cells(struct device_node *np);
++extern int of_n_size_cells(struct device_node *np);
++
++extern void prom_build_devicetree(void);
++
++#endif /* __KERNEL__ */
++#endif
+diff -purN linux_2.6.24_org/include/linux/battery.h linux_2.6.24_olpc/include/linux/battery.h
+--- linux_2.6.24_org/include/linux/battery.h	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/include/linux/battery.h	2008-02-15 18:58:06.000000000 +0000
+@@ -0,0 +1,101 @@
++/*
++ * Driver model for batteries
++ *
++ *	© 2006 David Woodhouse <dwmw2@infradead.org>
++ *
++ * Based on LED Class support, by John Lenz and Richard Purdie:
++ *
++ *	© 2005 John Lenz <lenz@cs.wisc.edu>
++ *	© 2005-2006 Richard Purdie <rpurdie@openedhand.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#ifndef __LINUX_BATTERY_H__
++#define __LINUX_BATTERY_H__
++
++struct device;
++struct class_device;
++
++/*
++ * Battery Core
++ */
++#define PWRDEV_TYPE_BATTERY	0
++#define PWRDEV_TYPE_AC		1
++
++#define BAT_STAT_PRESENT	(1<<0)
++#define BAT_STAT_LOW		(1<<1)
++#define BAT_STAT_FULL		(1<<2)
++#define BAT_STAT_CHARGING	(1<<3)
++#define BAT_STAT_DISCHARGING	(1<<4)
++#define BAT_STAT_OVERTEMP	(1<<5)
++#define BAT_STAT_CRITICAL	(1<<6)
++#define BAT_STAT_FIRE		(1<<7)
++#define BAT_STAT_CHARGE_DONE	(1<<8)
++
++/* Thou shalt not export any attributes in sysfs except these, and
++   with these units: */
++#define BAT_INFO_STATUS		"status"		/* Not free-form. Use
++							   provided function */
++#define BAT_INFO_TEMP1		"temp1"			/* °C/1000 */
++#define BAT_INFO_TEMP1_NAME	"temp1_name"		/* string */
++
++#define BAT_INFO_TEMP2		"temp2"			/* °C/1000 */
++#define BAT_INFO_TEMP2_NAME	"temp2_name"		/* string */
++
++#define BAT_INFO_VOLTAGE	"voltage"		/* mV */
++#define BAT_INFO_VOLTAGE_DESIGN	"voltage_design"	/* mV */
++
++#define BAT_INFO_CURRENT	"current"		/* mA */
++#define BAT_INFO_CURRENT_NOW	"current_now"		/* mA */
++
++#define BAT_INFO_POWER		"power"			/* mW */
++#define BAT_INFO_POWER_NOW	"power_now"		/* mW */
++
++/* The following capacity/charge properties are represented in either
++   mA or mW. The CAP_UNITS property MUST be provided if any of these are. */
++#define BAT_INFO_RATE		"rate"			/* CAP_UNITS */
++#define BAT_INFO_CAP_LEFT	"capacity_left"		/* CAP_UNITS*h */
++#define BAT_INFO_CAP_DESIGN	"capacity_design"	/* CAP_UNITS*h */
++#define BAT_INFO_CAP_LAST_FULL	"capacity_last_full"	/* CAP_UNITS*h */
++#define BAT_INFO_CAP_LOW	"capacity_low_thresh"	/* CAP_UNITS*h */
++#define BAT_INFO_CAP_WARN	"capacity_warn_thresh"	/* CAP_UNITS*h */
++#define BAT_INFO_CAP_UNITS	"capacity_units"	/* string: must be
++							   either mA or mW */
++	
++#define BAT_INFO_CAP_PCT	"capacity_percentage"	/* integer */
++
++#define BAT_INFO_TIME_EMPTY	"time_to_empty"		/* seconds */
++#define BAT_INFO_TIME_EMPTY_NOW	"time_to_empty_now"	/* seconds */
++#define BAT_INFO_TIME_FULL	"time_to_full"		/* seconds */
++#define BAT_INFO_TIME_FULL_NOW	"time_to_full_now"	/* seconds */
++
++#define BAT_INFO_MANUFACTURER	"manufacturer"		/* string */
++#define BAT_INFO_TECHNOLOGY	"technology"		/* string */
++#define BAT_INFO_MODEL		"model"			/* string */
++#define BAT_INFO_SERIAL		"serial"		/* string */
++#define BAT_INFO_OEM_INFO	"oem_info"		/* string */
++
++#define BAT_INFO_CYCLE_COUNT	"cycle_count"		/* integer */
++#define BAT_INFO_DATE_MFR	"date_manufactured"	/* YYYY[-MM[-DD]] */
++#define BAT_INFO_DATE_FIRST_USE	"date_first_use"	/* YYYY[-MM[-DD]] */
++
++struct battery_dev {
++	int			status_cap;
++	int			id;
++	int			type;
++	const char		*name;
++
++	struct device		*dev;
++};
++
++int battery_device_register(struct device *parent,
++			    struct battery_dev *battery_cdev);
++void battery_device_unregister(struct battery_dev *battery_cdev);
++
++
++ssize_t battery_attribute_show_status(char *buf, unsigned long status);
++ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status);
++#endif /* __LINUX_BATTERY_H__ */
+diff -purN linux_2.6.24_org/include/linux/fb.h linux_2.6.24_olpc/include/linux/fb.h
+--- linux_2.6.24_org/include/linux/fb.h	2008-02-15 20:10:55.000000000 +0000
++++ linux_2.6.24_olpc/include/linux/fb.h	2008-02-15 18:58:01.000000000 +0000
+@@ -666,6 +666,12 @@ struct fb_ops {
+ 	/* restore saved state */
+ 	void (*fb_restore_state)(struct fb_info *info);
+ 
++	/* Shut down the graphics engine to save power */
++	int (*fb_powerdown)(struct fb_info *info);
++
++	/* Power it back up */
++	int (*fb_powerup)(struct fb_info *info);
++
+ 	/* get capability given var */
+ 	void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
+ 			    struct fb_var_screeninfo *var);
+@@ -945,6 +951,9 @@ extern int fb_get_color_depth(struct fb_
+ extern int fb_get_options(char *name, char **option);
+ extern int fb_new_modelist(struct fb_info *info);
+ 
++extern int fb_powerdown(struct fb_info *info);
++extern int fb_powerup(struct fb_info *info);
++
+ extern struct fb_info *registered_fb[FB_MAX];
+ extern int num_registered_fb;
+ extern struct class *fb_class;
+diff -purN linux_2.6.24_org/include/linux/i2c-id.h linux_2.6.24_olpc/include/linux/i2c-id.h
+--- linux_2.6.24_org/include/linux/i2c-id.h	2008-02-15 20:10:52.000000000 +0000
++++ linux_2.6.24_olpc/include/linux/i2c-id.h	2008-02-15 18:58:00.000000000 +0000
+@@ -125,6 +125,7 @@
+ #define I2C_DRIVERID_LM4857 	92 	/* LM4857 Audio Amplifier */
+ #define I2C_DRIVERID_VP27SMPX	93	/* Panasonic VP27s tuner internal MPX */
+ #define I2C_DRIVERID_CS4270	94	/* Cirrus Logic 4270 audio codec */
++#define I2C_DRIVERID_DCON	95
+ 
+ #define I2C_DRIVERID_I2CDEV	900
+ #define I2C_DRIVERID_ARP        902    /* SMBus ARP Client              */
+diff -purN linux_2.6.24_org/include/linux/isl_38xx.h linux_2.6.24_olpc/include/linux/isl_38xx.h
+--- linux_2.6.24_org/include/linux/isl_38xx.h	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/include/linux/isl_38xx.h	2008-02-15 18:58:05.000000000 +0000
+@@ -0,0 +1,127 @@
++/*
++ *  Copyright (C) 2002 Intersil Americas Inc.
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef _LINUX_ISL_38XX_H
++#define _LINUX_ISL_38XX_H
++
++#include <asm/io.h>
++
++#define ISL38XX_CB_RX_QSIZE                     8
++#define ISL38XX_CB_TX_QSIZE                     32
++
++/* ISL38XX Access Point Specific definitions */
++#define ISL38XX_MAX_WDS_LINKS                   8
++
++/* ISL38xx Client Specific definitions */
++#define ISL38XX_PSM_ACTIVE_STATE                0
++#define ISL38XX_PSM_POWERSAVE_STATE             1
++
++/* ISL38XX Host Interface Definitions */
++#define ISL38XX_PCI_MEM_SIZE                    0x02000
++#define ISL38XX_MEMORY_WINDOW_SIZE              0x01000
++#define ISL38XX_DEV_FIRMWARE_ADDRES             0x20000
++#define ISL38XX_WRITEIO_DELAY                   10	/* in us */
++#define ISL38XX_RESET_DELAY                     50	/* in ms */
++#define ISL38XX_WAIT_CYCLE                      10	/* in 10ms */
++#define ISL38XX_MAX_WAIT_CYCLES                 10
++
++/* PCI Memory Area */
++#define ISL38XX_HARDWARE_REG                    0x0000
++#define ISL38XX_CARDBUS_CIS                     0x0800
++#define ISL38XX_DIRECT_MEM_WIN                  0x1000
++
++/* Hardware registers */
++#define ISL38XX_DEV_INT_REG                     0x0000
++#define ISL38XX_INT_IDENT_REG                   0x0010
++#define ISL38XX_INT_ACK_REG                     0x0014
++#define ISL38XX_INT_EN_REG                      0x0018
++#define ISL38XX_GEN_PURP_COM_REG_1              0x0020
++#define ISL38XX_GEN_PURP_COM_REG_2              0x0024
++#define ISL38XX_CTRL_BLK_BASE_REG               ISL38XX_GEN_PURP_COM_REG_1
++#define ISL38XX_DIR_MEM_BASE_REG                0x0030
++#define ISL38XX_CTRL_STAT_REG                   0x0078
++
++/* High end mobos queue up pci writes, the following
++ * is used to "read" from after a write to force flush */
++#define ISL38XX_PCI_POSTING_FLUSH		ISL38XX_INT_EN_REG
++
++/**
++ * isl38xx_w32_flush - PCI iomem write helper
++ * @base: (host) memory base address of the device
++ * @val: 32bit value (host order) to write
++ * @offset: byte offset into @base to write value to
++ * 
++ *  This helper takes care of writing a 32bit datum to the
++ *  specified offset into the device's pci memory space, and making sure 
++ *  the pci memory buffers get flushed by performing one harmless read 
++ *  from the %ISL38XX_PCI_POSTING_FLUSH offset.
++ */
++static inline void
++isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset)
++{
++	writel(val, base + offset);
++	(void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
++}
++
++/* Device Interrupt register bits */
++#define ISL38XX_DEV_INT_RESET                   0x0001
++#define ISL38XX_DEV_INT_UPDATE                  0x0002
++#define ISL38XX_DEV_INT_WAKEUP                  0x0008
++#define ISL38XX_DEV_INT_SLEEP                   0x0010
++#define ISL38XX_DEV_INT_ABORT                   0x0020
++/* thos two only used in USB */
++#define ISL38XX_DEV_INT_DATA                    0x0040
++#define ISL38XX_DEV_INT_MGMT                    0x0080
++
++#define ISL38XX_DEV_INT_PCIUART_CTS             0x4000
++#define ISL38XX_DEV_INT_PCIUART_DR              0x8000
++
++/* Interrupt Identification/Acknowledge/Enable register bits */
++#define ISL38XX_INT_IDENT_UPDATE                0x0002
++#define ISL38XX_INT_IDENT_INIT                  0x0004
++#define ISL38XX_INT_IDENT_WAKEUP                0x0008
++#define ISL38XX_INT_IDENT_SLEEP                 0x0010
++#define ISL38XX_INT_IDENT_PCIUART_CTS           0x4000
++#define ISL38XX_INT_IDENT_PCIUART_DR            0x8000
++
++#define ISL38XX_INT_SOURCES                     (ISL38XX_INT_IDENT_UPDATE | \
++						 ISL38XX_INT_IDENT_INIT | \
++						 ISL38XX_INT_IDENT_WAKEUP | \
++						 ISL38XX_INT_IDENT_SLEEP | \
++						 ISL38XX_INT_IDENT_PCIUART_CTS | \
++						 ISL38XX_INT_IDENT_PCIUART_DR)
++
++/* Control/Status register bits */
++/* Looks like there are other meaningful bits
++    0x20004400 seen in normal operation,
++    0x200044db at 'timeout waiting for mgmt response'
++*/
++#define ISL38XX_CTRL_STAT_SLEEPMODE             0x00000200
++#define	ISL38XX_CTRL_STAT_CLKRUN		0x00800000
++#define ISL38XX_CTRL_STAT_RESET                 0x10000000
++#define ISL38XX_CTRL_STAT_RAMBOOT               0x20000000
++#define ISL38XX_CTRL_STAT_STARTHALTED           0x40000000
++#define ISL38XX_CTRL_STAT_HOST_OVERRIDE         0x80000000
++
++/* Some flags for the isl hardware registers controlling DMA inside the
++ * chip */
++#define ISL38XX_DMA_STATUS_DONE                 0x00000001
++#define ISL38XX_DMA_STATUS_READY                0x00000002
++#define NET2280_EPA_FIFO_PCI_ADDR               0x20000000
++#define ISL38XX_DMA_MASTER_CONTROL_TRIGGER      0x00000004
++
++#endif /* _LINUX_ISL_38XX_H */
+diff -purN linux_2.6.24_org/include/linux/pm.h linux_2.6.24_olpc/include/linux/pm.h
+--- linux_2.6.24_org/include/linux/pm.h	2008-02-15 20:11:06.000000000 +0000
++++ linux_2.6.24_olpc/include/linux/pm.h	2008-02-15 18:58:06.000000000 +0000
+@@ -178,6 +178,9 @@ struct dev_pm_info {
+ 	unsigned		can_wakeup:1;
+ #ifdef	CONFIG_PM_SLEEP
+ 	unsigned		should_wakeup:1;
++	pm_message_t		prev_state;
++	void			* saved_state;
++	struct device		* pm_parent;
+ 	struct list_head	entry;
+ #endif
+ };
+diff -purN linux_2.6.24_org/include/linux/power_supply.h linux_2.6.24_olpc/include/linux/power_supply.h
+--- linux_2.6.24_org/include/linux/power_supply.h	2008-02-15 20:10:55.000000000 +0000
++++ linux_2.6.24_olpc/include/linux/power_supply.h	2008-02-15 18:58:01.000000000 +0000
+@@ -98,9 +98,11 @@ enum power_supply_property {
+ 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ 	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ 	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
++	POWER_SUPPLY_PROP_ACCUM_CURRENT,
+ 	/* Properties of type `const char *' */
+ 	POWER_SUPPLY_PROP_MODEL_NAME,
+ 	POWER_SUPPLY_PROP_MANUFACTURER,
++	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+ };
+ 
+ enum power_supply_type {
+@@ -169,9 +171,10 @@ struct power_supply_info {
+ 
+ extern void power_supply_changed(struct power_supply *psy);
+ extern int power_supply_am_i_supplied(struct power_supply *psy);
++extern void power_supply_status_changed(struct power_supply *psy);
+ 
+ extern int power_supply_register(struct device *parent,
+-				 struct power_supply *psy);
++                                 struct power_supply *psy);
+ extern void power_supply_unregister(struct power_supply *psy);
+ 
+ /* For APM emulation, think legacy userspace. */
+diff -purN linux_2.6.24_org/include/linux/vt_kern.h linux_2.6.24_olpc/include/linux/vt_kern.h
+--- linux_2.6.24_org/include/linux/vt_kern.h	2008-02-15 20:10:55.000000000 +0000
++++ linux_2.6.24_olpc/include/linux/vt_kern.h	2008-02-15 18:58:02.000000000 +0000
+@@ -96,4 +96,23 @@ struct vt_spawn_console {
+ };
+ extern struct vt_spawn_console vt_spawn_con;
+ 
++/* A notifier list for console events  */
++extern struct raw_notifier_head console_notifier_list;
++
++/* Called when the FG console switches to KD_TEXT mode */
++#define CONSOLE_EVENT_SWITCH_TEXT 0x01
++
++/* Called when the FG console switches to KD_GRAPHICS mode */
++#define CONSOLE_EVENT_SWITCH_GRAPHICS 0x02
++
++static inline int console_event_register(struct notifier_block *n)
++{
++	return raw_notifier_chain_register(&console_notifier_list, n);
++}
++
++static inline int console_event_unregister(struct notifier_block *n)
++{
++	return raw_notifier_chain_unregister(&console_notifier_list, n);
++}
++
+ #endif /* _VT_KERN_H */
+diff -purN linux_2.6.24_org/include/sound/ac97_codec.h linux_2.6.24_olpc/include/sound/ac97_codec.h
+--- linux_2.6.24_org/include/sound/ac97_codec.h	2008-02-15 20:10:44.000000000 +0000
++++ linux_2.6.24_olpc/include/sound/ac97_codec.h	2008-02-15 18:57:45.000000000 +0000
+@@ -281,10 +281,12 @@
+ /* specific - Analog Devices */
+ #define AC97_AD_TEST		0x5a	/* test register */
+ #define AC97_AD_TEST2		0x5c	/* undocumented test register 2 */
++#define AC97_AD_HPFD_SHIFT	12	/* High Pass Filter Disable */
+ #define AC97_AD_CODEC_CFG	0x70	/* codec configuration */
+ #define AC97_AD_JACK_SPDIF	0x72	/* Jack Sense & S/PDIF */
+ #define AC97_AD_SERIAL_CFG	0x74	/* Serial Configuration */
+ #define AC97_AD_MISC		0x76	/* Misc Control Bits */
++#define AC97_AD_VREFD_SHIFT	2	/* V_REFOUT Disable (AD1888) */
+ 
+ /* specific - Cirrus Logic */
+ #define AC97_CSR_ACMODE		0x5e	/* AC Mode Register */
+diff -purN linux_2.6.24_org/kernel/power/console.c linux_2.6.24_olpc/kernel/power/console.c
+--- linux_2.6.24_org/kernel/power/console.c	2008-02-15 20:12:34.000000000 +0000
++++ linux_2.6.24_olpc/kernel/power/console.c	2008-02-15 19:00:00.000000000 +0000
+@@ -9,7 +9,7 @@
+ #include <linux/console.h>
+ #include "power.h"
+ 
+-#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
++#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) && !defined(CONFIG_DISABLE_SUSPEND_VT_SWITCH)
+ #define SUSPEND_CONSOLE	(MAX_NR_CONSOLES-1)
+ 
+ static int orig_fgconsole, orig_kmsg;
+diff -purN linux_2.6.24_org/kernel/power/Kconfig linux_2.6.24_olpc/kernel/power/Kconfig
+--- linux_2.6.24_org/kernel/power/Kconfig	2008-02-15 20:12:34.000000000 +0000
++++ linux_2.6.24_olpc/kernel/power/Kconfig	2008-02-15 19:00:00.000000000 +0000
+@@ -37,9 +37,22 @@ config PM_DEBUG
+ 	code. This is helpful when debugging and reporting PM bugs, like
+ 	suspend support.
+ 
++config DISABLE_SUSPEND_VT_SWITCH
++	bool "Disable the console switch prior to suspend (DANGEROUS)"
++	depends on PM_DEBUG
++	default n
++	---help---
++	This option disables the automatic switch to VT console that happens
++	prior to Linux going into a suspend/sleep.  Your video card/framebuffer
++	must be able to properly restore the display (even if X is doing
++	something crazy!) in this scenario.  This is useful for saving
++	precious milliseconds during suspend and resume.
++
++	If unsure, say N.
++
+ config PM_VERBOSE
+ 	bool "Verbose Power Management debugging"
+-	depends on PM_DEBUG
++	depends on VT_CONSOLE && PM && EXPERIMENTAL
+ 	default n
+ 	---help---
+ 	This option enables verbose messages from the Power Management code.
+diff -purN linux_2.6.24_org/kernel/power/main.c linux_2.6.24_olpc/kernel/power/main.c
+--- linux_2.6.24_org/kernel/power/main.c	2008-02-15 20:12:34.000000000 +0000
++++ linux_2.6.24_olpc/kernel/power/main.c	2008-02-15 19:00:00.000000000 +0000
+@@ -76,11 +76,13 @@ static int suspend_prepare(void)
+ 	if (!suspend_ops || !suspend_ops->enter)
+ 		return -EPERM;
+ 
++#ifndef CONFIG_OLPC_PM
+ 	error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
+ 	if (error)
+ 		goto Finish;
+ 
+ 	pm_prepare_console();
++#endif
+ 
+ 	if (freeze_processes()) {
+ 		error = -EAGAIN;
+diff -purN linux_2.6.24_org/scripts/kconfig/conf.c linux_2.6.24_olpc/scripts/kconfig/conf.c
+--- linux_2.6.24_org/scripts/kconfig/conf.c	2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/conf.c	2008-02-15 18:57:09.000000000 +0000
+@@ -22,6 +22,7 @@ enum {
+ 	ask_new,
+ 	ask_silent,
+ 	set_default,
++	set_silentdefault,
+ 	set_yes,
+ 	set_mod,
+ 	set_no,
+@@ -64,10 +65,11 @@ static void strip(char *str)
+ 
+ static void check_stdin(void)
+ {
+-	if (!valid_stdin && input_mode == ask_silent) {
++	if (!valid_stdin && (input_mode == ask_silent ||
++			input_mode == set_silentdefault)) {
+ 		printf(_("aborted!\n\n"));
+ 		printf(_("Console input/output is redirected. "));
+-		printf(_("Run 'make oldconfig' to update configuration.\n\n"));
++		printf(_("Configuration file needs to be updated.\n\n"));
+ 		exit(1);
+ 	}
+ }
+@@ -102,6 +104,7 @@ static int conf_askvalue(struct symbol *
+ 		break;
+ 	case ask_new:
+ 	case ask_silent:
++	case set_silentdefault:
+ 		if (sym_has_value(sym)) {
+ 			printf("%s\n", def);
+ 			return 0;
+@@ -352,6 +355,7 @@ static int conf_choice(struct menu *menu
+ 		switch (input_mode) {
+ 		case ask_new:
+ 		case ask_silent:
++		case set_silentdefault:
+ 			if (!is_new) {
+ 				cnt = def;
+ 				printf("%d\n", cnt);
+@@ -424,7 +428,9 @@ static void conf(struct menu *menu)
+ 
+ 		switch (prop->type) {
+ 		case P_MENU:
+-			if (input_mode == ask_silent && rootEntry != menu) {
++			if ((input_mode == ask_silent ||
++					input_mode == set_silentdefault) &&
++					rootEntry != menu) {
+ 				check_conf(menu);
+ 				return;
+ 			}
+@@ -508,6 +514,16 @@ int main(int ac, char **av)
+ 			input_mode = ask_silent;
+ 			valid_stdin = isatty(0) && isatty(1) && isatty(2);
+ 			break;
++		case 'S':
++			input_mode = set_silentdefault;
++			valid_stdin = isatty(0) && isatty(1) && isatty(2);
++			defconfig_file = av[i++];
++			if (!defconfig_file) {
++				printf("%s: No default config file specified\n",
++					av[0]);
++				exit(1);
++			}
++			break;
+ 		case 'd':
+ 			input_mode = set_default;
+ 			break;
+@@ -557,6 +573,14 @@ int main(int ac, char **av)
+ 			exit(1);
+ 		}
+ 		break;
++	case set_silentdefault:
++		if (conf_read(defconfig_file)) {
++			printf("***\n"
++				"*** Can't find default configuration \"%s\"!\n"
++				"***\n", defconfig_file);
++			exit(1);
++		}
++		break;
+ 	case ask_silent:
+ 		if (stat(".config", &tmpstat)) {
+ 			printf(_("***\n"
+@@ -597,7 +621,7 @@ int main(int ac, char **av)
+ 		break;
+ 	}
+ 
+-	if (input_mode != ask_silent) {
++	if (input_mode != ask_silent && input_mode != set_silentdefault) {
+ 		rootEntry = &rootmenu;
+ 		conf(&rootmenu);
+ 		if (input_mode == ask_all) {
+@@ -610,19 +634,21 @@ int main(int ac, char **av)
+ 			fprintf(stderr, _("\n*** Kernel configuration requires explicit update.\n\n"));
+ 			return 1;
+ 		}
+-	} else
++	} else if (input_mode != set_silentdefault)
+ 		goto skip_check;
+ 
+ 	do {
+ 		conf_cnt = 0;
+ 		check_conf(&rootmenu);
+ 	} while (conf_cnt);
+-	if (conf_write(NULL)) {
++	if (conf_write(NULL, input_mode == ask_silent ||
++			input_mode == set_silentdefault)) {
+ 		fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+ 		return 1;
+ 	}
+ skip_check:
+-	if (input_mode == ask_silent && conf_write_autoconf()) {
++	if ((input_mode == ask_silent || input_mode == set_silentdefault) &&
++			conf_write_autoconf()) {
+ 		fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+ 		return 1;
+ 	}
+diff -purN linux_2.6.24_org/scripts/kconfig/confdata.c linux_2.6.24_olpc/scripts/kconfig/confdata.c
+--- linux_2.6.24_org/scripts/kconfig/confdata.c	2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/confdata.c	2008-02-15 18:57:09.000000000 +0000
+@@ -393,7 +393,7 @@ int conf_read(const char *name)
+ 	return 0;
+ }
+ 
+-int conf_write(const char *name)
++int conf_write(const char *name, int quiet)
+ {
+ 	FILE *out;
+ 	struct symbol *sym;
+@@ -548,9 +548,10 @@ int conf_write(const char *name)
+ 			return 1;
+ 	}
+ 
+-	printf(_("#\n"
+-		 "# configuration written to %s\n"
+-		 "#\n"), newname);
++	if (!quiet)
++		printf("#\n"
++			"# configuration written to %s\n"
++			"#\n", newname);
+ 
+ 	sym_set_change_count(0);
+ 
+diff -purN linux_2.6.24_org/scripts/kconfig/gconf.c linux_2.6.24_olpc/scripts/kconfig/gconf.c
+--- linux_2.6.24_org/scripts/kconfig/gconf.c	2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/gconf.c	2008-02-15 18:57:09.000000000 +0000
+@@ -621,7 +621,7 @@ void on_load1_activate(GtkMenuItem * men
+ 
+ void on_save_activate(GtkMenuItem * menuitem, gpointer user_data)
+ {
+-	if (conf_write(NULL))
++	if (conf_write(NULL, 0))
+ 		text_insert_msg(_("Error"), _("Unable to save configuration !"));
+ }
+ 
+@@ -634,7 +634,7 @@ store_filename(GtkFileSelection * file_s
+ 	fn = gtk_file_selection_get_filename(GTK_FILE_SELECTION
+ 					     (user_data));
+ 
+-	if (conf_write(fn))
++	if (conf_write(fn, 0))
+ 		text_insert_msg(_("Error"), _("Unable to save configuration !"));
+ 
+ 	gtk_widget_destroy(GTK_WIDGET(user_data));
+diff -purN linux_2.6.24_org/scripts/kconfig/lkc_proto.h linux_2.6.24_olpc/scripts/kconfig/lkc_proto.h
+--- linux_2.6.24_org/scripts/kconfig/lkc_proto.h	2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/lkc_proto.h	2008-02-15 18:57:09.000000000 +0000
+@@ -3,7 +3,7 @@
+ P(conf_parse,void,(const char *name));
+ P(conf_read,int,(const char *name));
+ P(conf_read_simple,int,(const char *name, int));
+-P(conf_write,int,(const char *name));
++P(conf_write,int,(const char *name, int));
+ P(conf_write_autoconf,int,(void));
+ P(conf_get_changed,bool,(void));
+ P(conf_set_changed_callback, void,(void (*fn)(void)));
+diff -purN linux_2.6.24_org/scripts/kconfig/Makefile linux_2.6.24_olpc/scripts/kconfig/Makefile
+--- linux_2.6.24_org/scripts/kconfig/Makefile	2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/Makefile	2008-02-15 18:57:09.000000000 +0000
+@@ -69,6 +69,9 @@ endif
+ %_defconfig: $(obj)/conf
+ 	$(Q)$< -D arch/$(SRCARCH)/configs/$@ $(Kconfig)
+ 
++%_silentdefconfig: $(obj)/conf
++	$(Q)$< -S arch/$(ARCH)/configs/$(subst _silentdefconfig,_defconfig,$@) arch/$(ARCH)/Kconfig
++
+ # Help text used by make help
+ help:
+ 	@echo  '  config	  - Update current config utilising a line-oriented program'
+Binary files linux_2.6.24_org/scripts/kconfig/mconf and linux_2.6.24_olpc/scripts/kconfig/mconf differ
+diff -purN linux_2.6.24_org/scripts/kconfig/mconf.c linux_2.6.24_olpc/scripts/kconfig/mconf.c
+--- linux_2.6.24_org/scripts/kconfig/mconf.c	2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/mconf.c	2008-02-15 18:57:09.000000000 +0000
+@@ -885,7 +885,7 @@ static void conf_save(void)
+ 		case 0:
+ 			if (!dialog_input_result[0])
+ 				return;
+-			if (!conf_write(dialog_input_result)) {
++			if (!conf_write(dialog_input_result, 0)) {
+ 				set_config_filename(dialog_input_result);
+ 				return;
+ 			}
+@@ -945,7 +945,7 @@ int main(int ac, char **av)
+ 
+ 	switch (res) {
+ 	case 0:
+-		if (conf_write(filename)) {
++		if (conf_write(filename, 0)) {
+ 			fprintf(stderr, _("\n\n"
+ 				"Error during writing of the kernel configuration.\n"
+ 				"Your kernel configuration changes were NOT saved."
+diff -purN linux_2.6.24_org/scripts/kconfig/qconf.cc linux_2.6.24_olpc/scripts/kconfig/qconf.cc
+--- linux_2.6.24_org/scripts/kconfig/qconf.cc	2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/qconf.cc	2008-02-15 18:57:09.000000000 +0000
+@@ -1458,7 +1458,7 @@ void ConfigMainWindow::loadConfig(void)
+ 
+ void ConfigMainWindow::saveConfig(void)
+ {
+-	if (conf_write(NULL))
++	if (conf_write(NULL, 0))
+ 		QMessageBox::information(this, "qconf", "Unable to save configuration!");
+ }
+ 
+@@ -1467,7 +1467,7 @@ void ConfigMainWindow::saveConfigAs(void
+ 	QString s = QFileDialog::getSaveFileName(".config", NULL, this);
+ 	if (s.isNull())
+ 		return;
+-	if (conf_write(QFile::encodeName(s)))
++	if (conf_write(QFile::encodeName(s), 0))
+ 		QMessageBox::information(this, "qconf", "Unable to save configuration!");
+ }
+ 
+@@ -1619,7 +1619,7 @@ void ConfigMainWindow::closeEvent(QClose
+ 	mb.setButtonText(QMessageBox::Cancel, "Cancel Exit");
+ 	switch (mb.exec()) {
+ 	case QMessageBox::Yes:
+-		conf_write(NULL);
++		conf_write(NULL, 0);
+ 	case QMessageBox::No:
+ 		e->accept();
+ 		break;
+diff -purN linux_2.6.24_org/sound/pci/ac97/ac97_patch.c linux_2.6.24_olpc/sound/pci/ac97/ac97_patch.c
+--- linux_2.6.24_org/sound/pci/ac97/ac97_patch.c	2008-02-15 20:10:24.000000000 +0000
++++ linux_2.6.24_olpc/sound/pci/ac97/ac97_patch.c	2008-02-15 18:57:24.000000000 +0000
+@@ -2029,8 +2029,9 @@ static const struct snd_kcontrol_new snd
+ 		.get = snd_ac97_ad1888_lohpsel_get,
+ 		.put = snd_ac97_ad1888_lohpsel_put
+ 	},
+-	AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1),
+-	AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1),
++	AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1),
++	AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2,
++			AC97_AD_HPFD_SHIFT, 1, 1),
+ 	AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0),
+ 	{
+ 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.c
+--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.c	2008-02-15 20:10:23.000000000 +0000
++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.c	2008-02-15 18:57:23.000000000 +0000
+@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac
+ 	return snd_cs5535audio_codec_read(cs5535au, reg);
+ }
+ 
+-static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
++static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
+ {
+ 	struct snd_card *card = cs5535au->card;
+ 	struct snd_ac97_bus *pbus;
+@@ -160,10 +160,14 @@ static int snd_cs5535audio_mixer(struct 
+ 		return err;
+ 
+ 	memset(&ac97, 0, sizeof(ac97));
+-	ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM;
++	ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM
++			| AC97_SCAP_POWER_SAVE;
+ 	ac97.private_data = cs5535au;
+ 	ac97.pci = cs5535au->pci;
+ 
++	/* olpc_prequirks is dummied out if not olpc */
++	olpc_prequirks(card, &ac97);
++
+ 	if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) {
+ 		snd_printk(KERN_ERR "mixer failed\n");
+ 		return err;
+@@ -171,6 +175,12 @@ static int snd_cs5535audio_mixer(struct 
+ 
+ 	snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk);
+ 
++	/* olpc_quirks is dummied out if not olpc */
++	if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) {
++		snd_printk(KERN_ERR "olpc quirks failed\n");
++		return err;
++	}
++
+ 	return 0;
+ }
+ 
+diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.h linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.h
+--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.h	2008-02-15 20:10:23.000000000 +0000
++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.h	2008-02-15 18:57:23.000000000 +0000
+@@ -78,6 +78,7 @@ struct cs5535audio_dma {
+ 	unsigned int buf_addr, buf_bytes;
+ 	unsigned int period_bytes, periods;
+ 	u32 saved_prd;
++	int pcm_open_flag;
+ };
+ 
+ struct cs5535audio {
+@@ -93,8 +94,21 @@ struct cs5535audio {
+ 	struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS];
+ };
+ 
++#ifdef CONFIG_PM
+ int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state);
+ int snd_cs5535audio_resume(struct pci_dev *pci);
++#endif
++
++#ifdef CONFIG_OLPC
++void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) __devinit;
++int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) __devinit;
++int olpc_ai_enable(struct snd_ac97 *ac97, u8 val);
++#else
++#define olpc_prequirks(arg,arg2)	do {} while (0)
++#define olpc_quirks(arg,arg2)		(0)
++#define olpc_ai_enable(a, v) (0)
++#endif
++
+ int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);
+ 
+ #endif /* __SOUND_CS5535AUDIO_H */
+diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_olpc.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_olpc.c
+--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_olpc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_olpc.c	2008-02-15 18:57:23.000000000 +0000
+@@ -0,0 +1,110 @@
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/info.h>
++#include <sound/control.h>
++#include <sound/ac97_codec.h>
++
++#include <asm/olpc.h>
++#include "cs5535audio.h"
++
++/*
++ * OLPC has an additional feature on top of the regular AD1888 codec features.
++ * It has an Analog Input mode that is switched into (after disabling the
++ * High Pass Filter) via GPIO.  It is only supported on B2 and later models.
++ */
++
++int olpc_ai_enable(struct snd_ac97 *ac97, u8 val)
++{
++	int err;
++
++	/*
++	 * update the High Pass Filter (via AC97_AD_TEST2), and then set
++	 * Analog Input mode through a GPIO.
++	 */
++
++	if (val) {
++		err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
++				1<<AC97_AD_HPFD_SHIFT, 1<<AC97_AD_HPFD_SHIFT);
++		geode_gpio_set(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
++	}
++	else {
++		err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
++				1<<AC97_AD_HPFD_SHIFT, 0);
++		geode_gpio_clear(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
++	}
++	if (err < 0)
++		snd_printk(KERN_ERR "Error updating AD_TEST2: %d\n", err);
++
++	return err;
++}
++EXPORT_SYMBOL_GPL(olpc_ai_enable);
++
++static int snd_cs5535audio_ai_info(struct snd_kcontrol *kcontrol,
++		struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++	uinfo->count = 1;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = 1;
++	return 0;
++}
++
++static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol,
++		struct snd_ctl_elem_value *ucontrol)
++{
++	ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC,
++			GPIO_OUTPUT_VAL);
++	return 0;
++}
++
++static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol,
++		struct snd_ctl_elem_value *ucontrol)
++{
++	struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol);
++	struct snd_ac97 *ac97 = cs5535au->ac97;
++
++	olpc_ai_enable(ac97, ucontrol->value.integer.value[0]);
++
++	return 1;
++}
++
++static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata =
++{
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++	.name = "DC Mode Enable",
++	.info = snd_cs5535audio_ai_info,
++	.get = snd_cs5535audio_ai_get,
++	.put = snd_cs5535audio_ai_put,
++	.private_value = 0
++};
++
++void __devinit olpc_prequirks(struct snd_card *card,
++		struct snd_ac97_template *ac97)
++{
++	/* Bail if this isn't an OLPC platform */
++	if (!machine_is_olpc())
++		return;
++
++	/* If on an OLPC B3 or higher, invert EAPD. */
++	if (olpc_board_at_least(olpc_board_pre(0xb3)))
++		ac97->scaps |= AC97_SCAP_INV_EAPD;
++}
++
++int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
++{
++	struct snd_ctl_elem_id elem;
++
++	/* Bail if this isn't an OLPC platform */
++	if (!machine_is_olpc())
++		return 0;
++
++	/* drop the original ad1888 HPF control */
++	memset(&elem, 0, sizeof(elem));
++	elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
++	strcpy(elem.name, "High Pass Filter Enable");
++	snd_ctl_remove_id(card, &elem);
++
++	/* add the override for OLPC's HPF */
++	return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls,
++			ac97->private_data));
++}
+diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_pcm.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_pcm.c
+--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_pcm.c	2008-02-15 20:10:23.000000000 +0000
++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_pcm.c	2008-02-15 18:57:23.000000000 +0000
+@@ -259,6 +259,9 @@ static int snd_cs5535audio_hw_params(str
+ 	err = cs5535audio_build_dma_packets(cs5535au, dma, substream,
+ 					    params_periods(hw_params),
+ 					    params_period_bytes(hw_params));
++	if (!err)
++		dma->pcm_open_flag = 1;
++
+ 	return err;
+ }
+ 
+@@ -267,6 +270,15 @@ static int snd_cs5535audio_hw_free(struc
+ 	struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
+ 	struct cs5535audio_dma *dma = substream->runtime->private_data;
+ 
++	if (dma->pcm_open_flag) {
++		if (substream == cs5535au->playback_substream)
++			snd_ac97_update_power(cs5535au->ac97,
++					AC97_PCM_FRONT_DAC_RATE, 0);
++		else
++			snd_ac97_update_power(cs5535au->ac97,
++					AC97_PCM_LR_ADC_RATE, 0);
++		dma->pcm_open_flag = 0;
++	}
+ 	cs5535audio_clear_dma_packets(cs5535au, dma, substream);
+ 	return snd_pcm_lib_free_pages(substream);
+ }
+@@ -341,6 +353,7 @@ static int snd_cs5535audio_capture_open(
+ 	int err;
+ 	struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
+ 	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct snd_ac97 *ac97 = cs5535au->ac97;
+ 
+ 	runtime->hw = snd_cs5535audio_capture;
+ 	cs5535au->capture_substream = substream;
+@@ -348,11 +361,29 @@ static int snd_cs5535audio_capture_open(
+ 	if ((err = snd_pcm_hw_constraint_integer(runtime,
+ 					 SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
+ 		return err;
+-	return 0;
++
++#ifdef CONFIG_OLPC
++	/* Disable Analog Input */
++	olpc_ai_enable(ac97, 0);
++	/* Enable V_ref bias while recording. */
++	snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT, 0);
++#endif
++	return err;
+ }
+ 
+ static int snd_cs5535audio_capture_close(struct snd_pcm_substream *substream)
+ {
++#ifdef CONFIG_OLPC
++	struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
++	struct snd_ac97 *ac97 = cs5535au->ac97;
++
++	/* Disable Analog Input */
++	olpc_ai_enable(ac97, 0);
++	/* Disable V_ref bias. */
++	snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT,
++			1<<AC97_AD_VREFD_SHIFT);
++#endif
++
+ 	return 0;
+ }
+ 
+diff -purN linux_2.6.24_org/sound/pci/cs5535audio/Makefile linux_2.6.24_olpc/sound/pci/cs5535audio/Makefile
+--- linux_2.6.24_org/sound/pci/cs5535audio/Makefile	2008-02-15 20:10:23.000000000 +0000
++++ linux_2.6.24_olpc/sound/pci/cs5535audio/Makefile	2008-02-15 18:57:23.000000000 +0000
+@@ -5,5 +5,9 @@
+ snd-cs5535audio-y := cs5535audio.o cs5535audio_pcm.o
+ snd-cs5535audio-$(CONFIG_PM) += cs5535audio_pm.o
+ 
++ifdef CONFIG_OLPC
++snd-cs5535audio-objs += cs5535audio_olpc.o
++endif
++
+ # Toplevel Module Dependency
+ obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o