replace the TI patch with a smaller patchset

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38816

1 files changed, 176 insertions, 0 deletions

diff --git a/target/linux/omap/patches-3.12/103-ARM-dts-add-AM33XX-MMC-support-and-documentation.patch b/target/linux/omap/patches-3.12/103-ARM-dts-add-AM33XX-MMC-support-and-documentation.patch
new file mode 100644
index 0000000..b4585b1
--- /dev/null
+++ b/target/linux/omap/patches-3.12/103-ARM-dts-add-AM33XX-MMC-support-and-documentation.patch
@@ -0,0 +1,176 @@
+Adds AM33XX MMC support for am335x-bone, am335x-evm and am335x-evmsk boards.
+
+Also added is the DMA binding definitions based on the generic DMA request
+binding.
+
+Additional changes made to DTS:
+* Interrupt, reg and compatible properties added
+* ti,needs-special-hs-handling added
+
+Signed-off-by: Matt Porter <mporter@ti.com>
+Acked-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Joel Fernandes <joelf@ti.com>
+
+---
+.../devicetree/bindings/mmc/ti-omap-hsmmc.txt      | 26 ++++++++++++++-
+ arch/arm/boot/dts/am335x-bone.dts                  | 11 +++++++
+ arch/arm/boot/dts/am335x-evm.dts                   |  7 ++++
+ arch/arm/boot/dts/am335x-evmsk.dts                 |  7 ++++
+ arch/arm/boot/dts/am33xx.dtsi                      | 38 ++++++++++++++++++++++
+ 5 files changed, 88 insertions(+), 1 deletion(-)
+
+diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+index ed271fc..8c8908a 100644
+--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
++++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+@@ -20,8 +20,29 @@ ti,dual-volt: boolean, supports dual voltage cards
+ ti,non-removable: non-removable slot (like eMMC)
+ ti,needs-special-reset: Requires a special softreset sequence
+ ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
++dmas: List of DMA specifiers with the controller specific format
++as described in the generic DMA client binding. A tx and rx
++specifier is required.
++dma-names: List of DMA request names. These strings correspond
++1:1 with the DMA specifiers listed in dmas. The string naming is
++to be "rx" and "tx" for RX and TX DMA requests, respectively.
++
++Examples:
++
++[hwmod populated DMA resources]
++
++	mmc1: mmc@0x4809c000 {
++		compatible = "ti,omap4-hsmmc";
++		reg = <0x4809c000 0x400>;
++		ti,hwmods = "mmc1";
++		ti,dual-volt;
++		bus-width = <4>;
++		vmmc-supply = <&vmmc>; /* phandle to regulator node */
++		ti,non-removable;
++	};
++
++[generic DMA request binding]
+ 
+-Example:
+ 	mmc1: mmc@0x4809c000 {
+ 		compatible = "ti,omap4-hsmmc";
+ 		reg = <0x4809c000 0x400>;
+@@ -30,4 +51,7 @@ Example:
+ 		bus-width = <4>;
+ 		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+ 		ti,non-removable;
++		dmas = <&edma 24
++			&edma 25>;
++		dma-names = "tx", "rx";
+ 	};
+diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
+index 7993c48..d5f43fe 100644
+--- a/arch/arm/boot/dts/am335x-bone.dts
++++ b/arch/arm/boot/dts/am335x-bone.dts
+@@ -9,3 +9,14 @@
+ 
+ #include "am33xx.dtsi"
+ #include "am335x-bone-common.dtsi"
++
++&ldo3_reg {
++	regulator-min-microvolt = <1800000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-always-on;
++};
++
++&mmc1 {
++	status = "okay";
++	vmmc-supply = <&ldo3_reg>;
++};
+diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
+index e8ec875..bc4a69d 100644
+--- a/arch/arm/boot/dts/am335x-evm.dts
++++ b/arch/arm/boot/dts/am335x-evm.dts
+@@ -477,6 +477,8 @@
+ 		};
+ 
+ 		vmmc_reg: regulator@12 {
++			regulator-min-microvolt = <1800000>;
++			regulator-max-microvolt = <3300000>;
+ 			regulator-always-on;
+ 		};
+ 	};
+@@ -517,3 +519,8 @@
+ 		ti,adc-channels = <4 5 6 7>;
+ 	};
+ };
++
++&mmc1 {
++	status = "okay";
++	vmmc-supply = <&vmmc_reg>;
++};
+diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
+index 4f339fa..55fd194 100644
+--- a/arch/arm/boot/dts/am335x-evmsk.dts
++++ b/arch/arm/boot/dts/am335x-evmsk.dts
+@@ -393,6 +393,8 @@
+ 		};
+ 
+ 		vmmc_reg: regulator@12 {
++			regulator-min-microvolt = <1800000>;
++			regulator-max-microvolt = <3300000>;
+ 			regulator-always-on;
+ 		};
+ 	};
+@@ -419,3 +421,8 @@
+ 	phy_id = <&davinci_mdio>, <1>;
+ 	phy-mode = "rgmii-txid";
+ };
++
++&mmc1 {
++	status = "okay";
++	vmmc-supply = <&vmmc_reg>;
++};
+diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
+index 9ce85e5..0a82fca 100644
+--- a/arch/arm/boot/dts/am33xx.dtsi
++++ b/arch/arm/boot/dts/am33xx.dtsi
+@@ -240,6 +240,44 @@
+ 			status = "disabled";
+ 		};
+ 
++		mmc1: mmc@48060000 {
++			compatible = "ti,omap4-hsmmc";
++			ti,hwmods = "mmc1";
++			ti,dual-volt;
++			ti,needs-special-reset;
++			ti,needs-special-hs-handling;
++			dmas = <&edma 24
++				&edma 25>;
++			dma-names = "tx", "rx";
++			interrupts = <64>;
++			interrupt-parent = <&intc>;
++			reg = <0x48060000 0x1000>;
++			status = "disabled";
++		};
++
++		mmc2: mmc@481d8000 {
++			compatible = "ti,omap4-hsmmc";
++			ti,hwmods = "mmc2";
++			ti,needs-special-reset;
++			dmas = <&edma 2
++				&edma 3>;
++			dma-names = "tx", "rx";
++			interrupts = <28>;
++			interrupt-parent = <&intc>;
++			reg = <0x481d8000 0x1000>;
++			status = "disabled";
++		};
++
++		mmc3: mmc@47810000 {
++			compatible = "ti,omap4-hsmmc";
++			ti,hwmods = "mmc3";
++			ti,needs-special-reset;
++			interrupts = <29>;
++			interrupt-parent = <&intc>;
++			reg = <0x47810000 0x1000>;
++			status = "disabled";
++		};
++
+ 		wdt2: wdt@44e35000 {
+ 			compatible = "ti,omap3-wdt";
+ 			ti,hwmods = "wd_timer2";