omap24xx: remove 2.6.38 support

SVN-Revision: 31426

1 files changed, 0 insertions, 195 deletions

diff --git a/target/linux/omap24xx/patches-2.6.38/300-nokia-board.patch b/target/linux/omap24xx/patches-2.6.38/300-nokia-board.patch
deleted file mode 100644
index e292c21..0000000
--- a/target/linux/omap24xx/patches-2.6.38/300-nokia-board.patch
+++ /dev/null
@@ -1,195 +0,0 @@
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -15,8 +15,10 @@
- #include <linux/delay.h>
- #include <linux/gpio.h>
- #include <linux/init.h>
-+#include <linux/irq.h>
- #include <linux/io.h>
- #include <linux/stddef.h>
-+#include <linux/platform_device.h>
- #include <linux/i2c.h>
- #include <linux/spi/spi.h>
- #include <linux/usb/musb.h>
-@@ -33,6 +35,7 @@
- #include <plat/onenand.h>
- #include <plat/mmc.h>
- #include <plat/serial.h>
-+#include <plat/cbus.h>
- 
- #include "mux.h"
- 
-@@ -194,6 +197,114 @@ static struct omap_onenand_platform_data
- };
- #endif
- 
-+#if defined(CONFIG_CBUS) || defined(CONFIG_CBUS_MODULE)
-+
-+static struct cbus_host_platform_data n8x0_cbus_data = {
-+	.clk_gpio	= 66,
-+	.dat_gpio	= 65,
-+	.sel_gpio	= 64,
-+};
-+
-+static struct platform_device n8x0_cbus_device = {
-+	.name		= "cbus",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data = &n8x0_cbus_data,
-+	},
-+};
-+
-+static struct resource retu_resource[] = {
-+	{
-+		.start	= -EINVAL, /* set later */
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct cbus_retu_platform_data n8x0_retu_data = {
-+	.irq_base	= CBUS_RETU_IRQ_BASE,
-+	.irq_end	= CBUS_RETU_IRQ_END,
-+	.devid		= CBUS_RETU_DEVICE_ID,
-+};
-+
-+static struct platform_device retu_device = {
-+	.name		= "retu",
-+	.id		= -1,
-+	.resource	= retu_resource,
-+	.num_resources	= ARRAY_SIZE(retu_resource),
-+	.dev		= {
-+		.platform_data = &n8x0_retu_data,
-+	},
-+};
-+
-+static struct resource tahvo_resource[] = {
-+	{
-+		.start	= -EINVAL, /* set later */
-+		.flags	= IORESOURCE_IRQ,
-+	}
-+};
-+
-+static struct platform_device tahvo_device = {
-+	.name		= "tahvo",
-+	.id		= -1,
-+	.resource	= tahvo_resource,
-+	.num_resources	= ARRAY_SIZE(tahvo_resource),
-+};
-+
-+static struct platform_device tahvo_usb_device = {
-+	.name		= "tahvo-usb",
-+	.id		= -1,
-+};
-+
-+static void __init n8x0_cbus_init(void)
-+{
-+	int		ret;
-+
-+	platform_device_register(&n8x0_cbus_device);
-+
-+	ret = gpio_request(108, "RETU irq");
-+	if (ret < 0) {
-+		pr_err("retu: Unable to reserve IRQ GPIO\n");
-+		return;
-+	}
-+
-+	ret = gpio_direction_input(108);
-+	if (ret < 0) {
-+		pr_err("retu: Unable to change gpio direction\n");
-+		gpio_free(108);
-+		return;
-+	}
-+
-+	set_irq_type(gpio_to_irq(108), IRQ_TYPE_EDGE_RISING);
-+	retu_resource[0].start = gpio_to_irq(108);
-+	platform_device_register(&retu_device);
-+
-+	ret = gpio_request(111, "TAHVO irq");
-+	if (ret) {
-+		pr_err("tahvo: Unable to reserve IRQ GPIO\n");
-+		gpio_free(108);
-+		return;
-+	}
-+
-+	/* Set the pin as input */
-+	ret = gpio_direction_input(111);
-+	if (ret) {
-+		pr_err("tahvo: Unable to change direction\n");
-+		gpio_free(108);
-+		gpio_free(111);
-+		return;
-+	}
-+
-+	tahvo_resource[0].start = gpio_to_irq(111);
-+	platform_device_register(&tahvo_device);
-+	platform_device_register(&tahvo_usb_device);
-+}
-+
-+#else
-+static inline void __init n8x0_cbus_init(void)
-+{
-+}
-+#endif
-+
- #if defined(CONFIG_MENELAUS) &&						\
- 	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
- 
-@@ -628,11 +739,10 @@ static void __init n8x0_map_io(void)
- 	omap242x_map_common_io();
- }
- 
--static void __init n8x0_init_irq(void)
-+static void __init n8x0_init_early(void)
- {
- 	omap2_init_common_infrastructure();
- 	omap2_init_common_devices(NULL, NULL);
--	omap_init_irq();
- }
- 
- #ifdef CONFIG_OMAP_MUX
-@@ -686,6 +796,8 @@ static inline void board_serial_init(voi
- static void __init n8x0_init_machine(void)
- {
- 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-+	n8x0_cbus_init();
-+
- 	/* FIXME: add n810 spi devices */
- 	spi_register_board_info(n800_spi_board_info,
- 				ARRAY_SIZE(n800_spi_board_info));
-@@ -703,27 +815,30 @@ static void __init n8x0_init_machine(voi
- 
- MACHINE_START(NOKIA_N800, "Nokia N800")
- 	.boot_params	= 0x80000100,
--	.map_io		= n8x0_map_io,
- 	.reserve	= omap_reserve,
--	.init_irq	= n8x0_init_irq,
-+	.map_io		= n8x0_map_io,
-+	.init_early	= n8x0_init_early,
-+	.init_irq	= omap_init_irq,
- 	.init_machine	= n8x0_init_machine,
- 	.timer		= &omap_timer,
- MACHINE_END
- 
- MACHINE_START(NOKIA_N810, "Nokia N810")
- 	.boot_params	= 0x80000100,
--	.map_io		= n8x0_map_io,
- 	.reserve	= omap_reserve,
--	.init_irq	= n8x0_init_irq,
-+	.map_io		= n8x0_map_io,
-+	.init_early	= n8x0_init_early,
-+	.init_irq	= omap_init_irq,
- 	.init_machine	= n8x0_init_machine,
- 	.timer		= &omap_timer,
- MACHINE_END
- 
- MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
- 	.boot_params	= 0x80000100,
--	.map_io		= n8x0_map_io,
- 	.reserve	= omap_reserve,
--	.init_irq	= n8x0_init_irq,
-+	.map_io		= n8x0_map_io,
-+	.init_early	= n8x0_init_early,
-+	.init_irq	= omap_init_irq,
- 	.init_machine	= n8x0_init_machine,
- 	.timer		= &omap_timer,
- MACHINE_END