upgrade ppc40x to 2.6.30, unify magicbox and openrb board cuimages

SVN-Revision: 17018

9 files changed, 153 insertions, 839 deletions

diff --git a/target/linux/ppc40x/Makefile b/target/linux/ppc40x/Makefile
index b7e584f..d46dcba 100644
--- a/target/linux/ppc40x/Makefile
+++ b/target/linux/ppc40x/Makefile
@@ -9,9 +9,9 @@ include $(TOPDIR)/rules.mk
 ARCH:=powerpc
 BOARD:=ppc40x
 BOARDNAME:=AMCC/IBM PPC40x
-FEATURES:=squashfs jffs2 usb
+FEATURES:=squashfs usb
 
-LINUX_VERSION:=2.6.28.10
+LINUX_VERSION:=2.6.30.2
 LINUX_KARCH:=powerpc
 
 include $(INCLUDE_DIR)/target.mk
diff --git a/target/linux/ppc40x/config-2.6.30 b/target/linux/ppc40x/config-2.6.30
index 9854f66..b650877 100644
--- a/target/linux/ppc40x/config-2.6.30
+++ b/target/linux/ppc40x/config-2.6.30
@@ -27,7 +27,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_BOOKE_WDT is not set
 CONFIG_BOUNCE=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd"
+CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd"
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CONSISTENT_SIZE=0x00200000
 # CONFIG_CPU_FREQ is not set
@@ -111,8 +111,7 @@ CONFIG_KILAUEA=y
 # CONFIG_LEDS_GPIO is not set
 CONFIG_LOWMEM_SIZE=0x30000000
 # CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_MAGICBOXV1=y
-CONFIG_MAGICBOXV2=y
+CONFIG_MAGICBOX=y
 # CONFIG_MAKALU is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_MMIO_NVRAM is not set
@@ -129,8 +128,7 @@ CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
-CONFIG_OPENRB_LIGHT=y
-CONFIG_OPENRB_MEDIUM=y
+CONFIG_OPENRB=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_PCI=y
diff --git a/target/linux/ppc40x/image/Makefile b/target/linux/ppc40x/image/Makefile
index 3afeeca..e03ffd9 100644
--- a/target/linux/ppc40x/image/Makefile
+++ b/target/linux/ppc40x/image/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2008 OpenWrt.org
+# Copyright (C) 2008-2009 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -36,21 +36,13 @@ endef
 
 define Image/Build/jffs2-64k
 	( \
-		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.magicboxv1 bs=1152k conv=sync; \
+		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.magicbox bs=1152k conv=sync; \
 		dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-	) > $(BIN_DIR)/openwrt-$(BOARD)-magicboxv1-jffs2.img
+	) > $(BIN_DIR)/openwrt-$(BOARD)-magicbox-jffs2.img
 	( \
-		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.magicboxv2 bs=1152k conv=sync; \
+		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.openrb bs=1152k conv=sync; \
 		dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-	) > $(BIN_DIR)/openwrt-$(BOARD)-magicboxv2-jffs2.img
-	( \
-		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.openrb-light bs=1152k conv=sync; \
-		dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-	) > $(BIN_DIR)/openwrt-$(BOARD)-openrb-light-jffs2.img
-	( \
-		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.openrb-medium bs=1152k conv=sync; \
-		dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-	) > $(BIN_DIR)/openwrt-$(BOARD)-openrb-medium-jffs2.img
+	) > $(BIN_DIR)/openwrt-$(BOARD)-openrb-jffs2.img
 endef
 
 define Image/Build/squashfs
@@ -61,21 +53,13 @@ define Image/Build/squashfs
 		dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
 	) > $(BIN_DIR)/openwrt-$(BOARD)-kilauea-$(1).img
 	( \
-		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.magicboxv1 bs=1152k conv=sync; \
-		dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-	) > $(BIN_DIR)/openwrt-$(BOARD)-magicboxv1-$(1).img
-	( \
-		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.magicboxv2 bs=1152k conv=sync; \
-		dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-	) > $(BIN_DIR)/openwrt-$(BOARD)-magicboxv2-$(1).img
-	( \
-		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.openrb-light bs=1152k conv=sync; \
+		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.magicbox bs=1152k conv=sync; \
 		dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-	) > $(BIN_DIR)/openwrt-$(BOARD)-openrb-light-$(1).img
+	) > $(BIN_DIR)/openwrt-$(BOARD)-magicbox-$(1).img
 	( \
-		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.openrb-medium bs=1152k conv=sync; \
+		dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.openrb bs=1152k conv=sync; \
 		dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-	) > $(BIN_DIR)/openwrt-$(BOARD)-openrb-medium-$(1).img
+	) > $(BIN_DIR)/openwrt-$(BOARD)-openrb-$(1).img
 endef
 
 $(eval $(call BuildImage))
diff --git a/target/linux/ppc40x/patches-2.6.30/008-openrb-medium.patch b/target/linux/ppc40x/patches-2.6.30/004-magicbox.patch
index c7b7af0..a1a9da8 100644
--- a/target/linux/ppc40x/patches-2.6.30/008-openrb-medium.patch
+++ b/target/linux/ppc40x/patches-2.6.30/004-magicbox.patch
@@ -1,58 +1,11 @@
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -76,7 +76,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
- 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
- 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
- 		cuboot-acadia.c cuboot-amigaone.c cuboot-magicboxv1.c \
--		cuboot-magicboxv2.c cuboot-openrb-light.c
-+		cuboot-magicboxv2.c cuboot-openrb-light.c cuboot-openrb-medium.c
- src-boot := $(src-wlib) $(src-plat) empty.c
- 
- src-boot := $(addprefix $(obj)/, $(src-boot))
-@@ -196,6 +196,7 @@ image-$(CONFIG_ACADIA)			+= cuImage.acad
- image-$(CONFIG_MAGICBOXV1)		+= cuImage.magicboxv1
- image-$(CONFIG_MAGICBOXV2)		+= cuImage.magicboxv2
- image-$(CONFIG_OPENRB_LIGHT)		+= cuImage.openrb-light
-+image-$(CONFIG_OPENRB_MEDIUM)		+= cuImage.openrb-medium
- 
- # Board ports in arch/powerpc/platform/44x/Kconfig
- image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
---- a/arch/powerpc/platforms/40x/Kconfig
-+++ b/arch/powerpc/platforms/40x/Kconfig
-@@ -89,6 +89,16 @@ config OPENRB_LIGHT
- 	help
- 	  This option enables support for the OpenRB Light board.
- 
-+config OPENRB_MEDIUM
-+	bool "OpenRB Medium"
-+	depends on 40x
-+	default n
-+	select PPC40x_SIMPLE
-+	select 405EP
-+	select PCI
-+	help
-+	  This option enables support for the OpenRB Medium board.
-+
- #config REDWOOD_5
- #	bool "Redwood-5"
- #	depends on 40x
---- a/arch/powerpc/platforms/40x/ppc40x_simple.c
-+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
-@@ -55,6 +55,7 @@ static char *board[] __initdata = {
- 	"magicboxv1",
- 	"magicboxv2",
- 	"openrb,light",
-+	"openrb,medium",
- };
- 
- static int __init ppc40x_probe(void)
 --- /dev/null
-+++ b/arch/powerpc/boot/cuboot-openrb-medium.c
-@@ -0,0 +1,69 @@
++++ b/arch/powerpc/boot/cuboot-magicbox.c
+@@ -0,0 +1,90 @@
 +/*
-+ * Old U-boot compatibility for OpenRB Medium
++ * Old U-boot compatibility for Magicbox boards
 + *
-+ * Author: Gabor Juhos <juhosg@openwrt.org>
++ * Author: Imre Kaloz <kaloz@openwrt.org>
++ *         Gabor Juhos <juhosg@openwrt.org>
 + *
 + * This program is free software; you can redistribute it and/or modify it
 + * under the terms of the GNU General Public License version 2 as published
@@ -76,8 +29,8 @@
 +static void fixup_cf_card(void)
 +{
 +#define DCRN_CPC0_PCI_BASE	0xf9
-+#define CF_CS0_BASE		0xff100000
-+#define CF_CS1_BASE		0xff200000
++#define CF_CS0_BASE	0xff100000
++#define CF_CS1_BASE	0xff200000
 +
 +	/* Turn on PerWE instead of PCIsomething */
 +	mtdcr(DCRN_CPC0_PCI_BASE,
@@ -100,11 +53,32 @@
 +#undef CF_CS1_BASE
 +}
 +
-+static void openrb_light_fixups(void)
++static void magicbox_fixups(void)
 +{
-+	fixup_cf_card();
-+	ibm405ep_fixup_clocks(33333000);
++	ibm405ep_fixup_clocks(bd.bi_procfreq / 8);
 +	ibm4xx_sdram_fixup_memsize();
++
++	/* Magicbox v1 has only one ethernet, one serial and no
++	 * CF slot -- detect it using it's fake enet1addr
++	 */
++	if ((bd.bi_enet1addr[0] == 0x00) &&
++	    (bd.bi_enet1addr[1] == 0x00) &&
++	    (bd.bi_enet1addr[2] == 0x02) &&
++	    (bd.bi_enet1addr[3] == 0xfa) &&
++	    (bd.bi_enet1addr[4] == 0xf0) &&
++	    (bd.bi_enet1addr[5] == 0x80)) {
++		void *devp;
++
++		devp = finddevice("/plb/opb/ethernet@ef600900");
++		del_node(devp);
++		devp = finddevice("/plb/opb/serial@ef600400");
++		del_node(devp);
++		devp = finddevice("/plb/ebc/cf_card@ff100000");
++		del_node(devp);
++	} else {
++		fixup_cf_card();
++	}
++
 +	dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
 +}
 +
@@ -112,19 +86,18 @@
 +		unsigned long r6, unsigned long r7)
 +{
 +	CUBOOT_INIT();
-+	platform_ops.fixups = openrb_light_fixups;
++	platform_ops.fixups = magicbox_fixups;
 +	platform_ops.exit = ibm40x_dbcr_reset;
 +	fdt_init(_dtb_start);
 +	serial_console_init();
 +}
-+
 --- /dev/null
-+++ b/arch/powerpc/boot/dts/openrb-medium.dts
++++ b/arch/powerpc/boot/dts/magicbox.dts
 @@ -0,0 +1,281 @@
 +/*
-+ * Device Tree Source for OpenRB Medium board
++ * Device Tree Source for Magicbox boards
 + *
-+ * Copyright 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright 2008-2009 Imre Kaloz <kaloz@openwrt.org>
 + * Copyright 2009 Gabor Juhos <juhosg@openwrt.org>
 + *
 + * Based on walnut.dts
@@ -139,8 +112,8 @@
 +/ {
 +	#address-cells = <1>;
 +	#size-cells = <1>;
-+	model = "openrb,medium";
-+	compatible = "openrb,medium";
++	model = "magicbox";
++	compatible = "magicbox";
 +	dcr-parent = <&{/cpus/cpu@0}>;
 +
 +	aliases {
@@ -158,12 +131,12 @@
 +			device_type = "cpu";
 +			model = "PowerPC,405EP";
 +			reg = <0x00000000>;
-+			clock-frequency = <0xbebc200>; /* Filled in by zImage */
++			clock-frequency = <0>; /* Filled in by zImage */
 +			timebase-frequency = <0>; /* Filled in by zImage */
-+			i-cache-line-size = <20>;
-+			d-cache-line-size = <20>;
-+			i-cache-size = <4000>;
-+			d-cache-size = <4000>;
++			i-cache-line-size = <0x20>;
++			d-cache-line-size = <0x20>;
++			i-cache-size = <0x4000>;
++			d-cache-size = <0x4000>;
 +			dcr-controller;
 +			dcr-access-method = "native";
 +		};
@@ -402,3 +375,53 @@
 +		linux,stdout-path = "/plb/opb/serial@ef600300";
 +	};
 +};
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -75,7 +75,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
+ 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
+ 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
+ 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
+-		cuboot-acadia.c cuboot-amigaone.c
++		cuboot-acadia.c cuboot-amigaone.c cuboot-magicbox.c
+ src-boot := $(src-wlib) $(src-plat) empty.c
+ 
+ src-boot := $(addprefix $(obj)/, $(src-boot))
+@@ -192,6 +192,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImag
+ image-$(CONFIG_EP405)			+= dtbImage.ep405
+ image-$(CONFIG_WALNUT)			+= treeImage.walnut
+ image-$(CONFIG_ACADIA)			+= cuImage.acadia
++image-$(CONFIG_MAGICBOX)		+= cuImage.magicbox
+ 
+ # Board ports in arch/powerpc/platform/44x/Kconfig
+ image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
+--- a/arch/powerpc/platforms/40x/Kconfig
++++ b/arch/powerpc/platforms/40x/Kconfig
+@@ -49,6 +49,16 @@ config KILAUEA
+ 	help
+ 	  This option enables support for the AMCC PPC405EX evaluation board.
+ 
++config MAGICBOX
++	bool "Magicbox"
++	depends on 40x
++	default n
++	select PPC40x_SIMPLE
++	select 405EP
++	select PCI
++	help
++	  This option enables support for the Magicbox boards.
++
+ config MAKALU
+ 	bool "Makalu"
+ 	depends on 40x
+--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
++++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
+@@ -51,7 +51,8 @@ machine_device_initcall(ppc40x_simple, p
+  * board.c file for it rather than adding it to this list.
+  */
+ static char *board[] __initdata = {
+-	"amcc,acadia"
++	"amcc,acadia",
++	"magicbox"
+ };
+ 
+ static int __init ppc40x_probe(void)
diff --git a/target/linux/ppc40x/patches-2.6.30/005-magicboxv1.patch b/target/linux/ppc40x/patches-2.6.30/005-magicboxv1.patch
deleted file mode 100644
index 990eb53..0000000
--- a/target/linux/ppc40x/patches-2.6.30/005-magicboxv1.patch
+++ /dev/null
@@ -1,314 +0,0 @@
---- /dev/null
-+++ b/arch/powerpc/boot/cuboot-magicboxv1.c
-@@ -0,0 +1,41 @@
-+/*
-+ * Old U-boot compatibility for Magicbox v1
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "io.h"
-+#include "dcr.h"
-+#include "stdio.h"
-+#include "4xx.h"
-+#include "44x.h"
-+#include "cuboot.h"
-+
-+#define TARGET_4xx
-+#define TARGET_405EP
-+#include "ppcboot.h"
-+
-+static bd_t bd;
-+
-+static void magicboxv1_fixups(void)
-+{
-+	ibm405ep_fixup_clocks(25000000);
-+	ibm4xx_sdram_fixup_memsize();
-+	dt_fixup_mac_addresses(&bd.bi_enetaddr);
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+		unsigned long r6, unsigned long r7)
-+{
-+	CUBOOT_INIT();
-+	platform_ops.fixups = magicboxv1_fixups;
-+	platform_ops.exit = ibm40x_dbcr_reset;
-+	fdt_init(_dtb_start);
-+	serial_console_init();
-+}
-+
---- /dev/null
-+++ b/arch/powerpc/boot/dts/magicboxv1.dts
-@@ -0,0 +1,217 @@
-+/*
-+ * Device Tree Source for Magicbox v1
-+ *
-+ * Copyright 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * Based on walnut.dts
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without
-+ * any warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+/ {
-+	#address-cells = <1>;
-+	#size-cells = <1>;
-+	model = "magicboxv1";
-+	compatible = "magicboxv1";
-+	dcr-parent = <&{/cpus/cpu@0}>;
-+
-+	aliases {
-+		ethernet0 = &EMAC;
-+		serial0 = &UART;
-+	};
-+
-+	cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		cpu@0 {
-+			device_type = "cpu";
-+			model = "PowerPC,405EP";
-+			reg = <0x00000000>;
-+			clock-frequency = <0xbebc200>; /* Filled in by zImage */
-+			timebase-frequency = <0>; /* Filled in by zImage */
-+			i-cache-line-size = <20>;
-+			d-cache-line-size = <20>;
-+			i-cache-size = <4000>;
-+			d-cache-size = <4000>;
-+			dcr-controller;
-+			dcr-access-method = "native";
-+		};
-+	};
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
-+	};
-+
-+	UIC0: interrupt-controller {
-+		compatible = "ibm,uic";
-+		interrupt-controller;
-+		cell-index = <0>;
-+		dcr-reg = <0x0c0 0x009>;
-+		#address-cells = <0>;
-+		#size-cells = <0>;
-+		#interrupt-cells = <2>;
-+	};
-+
-+	plb {
-+		compatible = "ibm,plb3";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges;
-+		clock-frequency = <0>; /* Filled in by zImage */
-+
-+		SDRAM0: memory-controller {
-+			compatible = "ibm,sdram-405ep";
-+			dcr-reg = <0x010 0x002>;
-+		};
-+
-+		MAL: mcmal {
-+			compatible = "ibm,mcmal-405ep", "ibm,mcmal";
-+			dcr-reg = <0x180 0x062>;
-+			num-tx-chans = <4>;
-+			num-rx-chans = <2>;
-+			interrupt-parent = <&UIC0>;
-+			interrupts = <
-+				0xb 0x4 /* TXEOB */
-+				0xc 0x4 /* RXEOB */
-+				0xa 0x4 /* SERR */
-+				0xd 0x4 /* TXDE */
-+				0xe 0x4 /* RXDE */>;
-+		};
-+
-+		POB0: opb {
-+			compatible = "ibm,opb-405ep", "ibm,opb";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0xef600000 0xef600000 0x00a00000>;
-+			dcr-reg = <0x0a0 0x005>;
-+			clock-frequency = <0>; /* Filled in by zImage */
-+
-+			UART: serial@ef600300 {
-+				device_type = "serial";
-+				compatible = "ns16550";
-+				reg = <0xef600300 0x00000008>;
-+				virtual-reg = <0xef600300>;
-+				clock-frequency = <0>; /* Filled in by zImage */
-+				current-speed = <115200>;
-+				interrupt-parent = <&UIC0>;
-+				interrupts = <0x0 0x4>;
-+			};
-+
-+			IIC: i2c@ef600500 {
-+				compatible = "ibm,iic-405ep", "ibm,iic";
-+				reg = <0xef600500 0x00000011>;
-+				interrupt-parent = <&UIC0>;
-+				interrupts = <0x2 0x4>;
-+			};
-+
-+			GPIO: gpio@ef600700 {
-+				compatible = "ibm,gpio-405ep";
-+				reg = <0xef600700 0x00000020>;
-+			};
-+
-+			EMAC: ethernet@ef600800 {
-+				linux,network-index = <0x0>;
-+				device_type = "network";
-+				compatible = "ibm,emac-405ep", "ibm,emac";
-+				interrupt-parent = <&UIC0>;
-+				interrupts = <
-+					0xf 0x4 /* Ethernet */
-+					0x9 0x4 /* Ethernet Wake Up */>;
-+				local-mac-address = [000000000000]; /* Filled in by zImage */
-+				reg = <0xef600800 0x00000070>;
-+				mal-device = <&MAL>;
-+				mal-tx-channel = <0>;
-+				mal-rx-channel = <0>;
-+				cell-index = <0>;
-+				max-frame-size = <0x5dc>;
-+				rx-fifo-size = <0x1000>;
-+				tx-fifo-size = <0x800>;
-+				phy-mode = "mii";
-+				phy-map = <0x00000000>;
-+			};
-+
-+		};
-+
-+		EBC0: ebc {
-+			compatible = "ibm,ebc-405ep", "ibm,ebc";
-+			dcr-reg = <0x012 0x002>;
-+			#address-cells = <2>;
-+			#size-cells = <1>;
-+			/* The ranges property is supplied by the bootwrapper
-+			 * and is based on the firmware's configuration of the
-+			 * EBC bridge
-+			 */
-+			clock-frequency = <0>; /* Filled in by zImage */
-+
-+			nor_flash@ffc00000 {
-+				compatible = "cfi-flash";
-+				bank-width = <2>;
-+				reg = <0x00000000 0xffc00000 0x00400000>;
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				partition@0 {
-+					label = "linux";
-+					reg = <0x0 0x120000>;
-+				};
-+				partition@120000 {
-+					label = "rootfs";
-+					reg = <0x120000 0x2a0000>;
-+				};
-+				partition@3c0000 {
-+					label = "u-boot";
-+					reg = <0x3c0000 0x30000>;
-+					read-only;
-+				};
-+			};
-+		};
-+
-+		PCI0: pci@ec000000 {
-+			device_type = "pci";
-+			#interrupt-cells = <1>;
-+			#size-cells = <2>;
-+			#address-cells = <3>;
-+			compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
-+			primary;
-+			reg = <0xeec00000 0x00000008	/* Config space access */
-+			       0xeed80000 0x00000004	/* IACK */
-+			       0xeed80000 0x00000004	/* Special cycle */
-+			       0xef480000 0x00000040>;	/* Internal registers */
-+
-+			/* Outbound ranges, one memory and one IO,
-+			 * later cannot be changed. Chip supports a second
-+			 * IO range but we don't use it for now
-+			 */
-+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
-+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
-+
-+			/* Inbound 2GB range starting at 0 */
-+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-+
-+			/* Magicbox v1 has all 4 IRQ pins tied together per slot */
-+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
-+			interrupt-map = <
-+				/* IDSEL 1 */
-+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
-+
-+				/* IDSEL 2 */
-+				0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
-+
-+				/* IDSEL 3 */
-+				0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
-+
-+				/* IDSEL 4 */
-+				0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
-+			>;
-+		};
-+	};
-+
-+	chosen {
-+		linux,stdout-path = "/plb/opb/serial@ef600300";
-+	};
-+};
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -75,7 +75,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
- 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
- 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
- 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
--		cuboot-acadia.c cuboot-amigaone.c
-+		cuboot-acadia.c cuboot-amigaone.c cuboot-magicboxv1.c
- src-boot := $(src-wlib) $(src-plat) empty.c
- 
- src-boot := $(addprefix $(obj)/, $(src-boot))
-@@ -192,6 +192,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImag
- image-$(CONFIG_EP405)			+= dtbImage.ep405
- image-$(CONFIG_WALNUT)			+= treeImage.walnut
- image-$(CONFIG_ACADIA)			+= cuImage.acadia
-+image-$(CONFIG_MAGICBOXV1)		+= cuImage.magicboxv1
- 
- # Board ports in arch/powerpc/platform/44x/Kconfig
- image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
---- a/arch/powerpc/platforms/40x/Kconfig
-+++ b/arch/powerpc/platforms/40x/Kconfig
-@@ -49,6 +49,16 @@ config KILAUEA
- 	help
- 	  This option enables support for the AMCC PPC405EX evaluation board.
- 
-+config MAGICBOXV1
-+	bool "Magicbox v1"
-+	depends on 40x
-+	default n
-+	select PPC40x_SIMPLE
-+	select 405EP
-+	select PCI
-+	help
-+	  This option enables support for the Magicbox v1 board.
-+
- config MAKALU
- 	bool "Makalu"
- 	depends on 40x
---- a/arch/powerpc/platforms/40x/ppc40x_simple.c
-+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
-@@ -51,7 +51,8 @@ machine_device_initcall(ppc40x_simple, p
-  * board.c file for it rather than adding it to this list.
-  */
- static char *board[] __initdata = {
--	"amcc,acadia"
-+	"amcc,acadia",
-+	"magicboxv1",
- };
- 
- static int __init ppc40x_probe(void)
diff --git a/target/linux/ppc40x/patches-2.6.30/006-magicboxv2.patch b/target/linux/ppc40x/patches-2.6.30/005-openrb.patch
index 1fddad5..0ad6740 100644
--- a/target/linux/ppc40x/patches-2.6.30/006-magicboxv2.patch
+++ b/target/linux/ppc40x/patches-2.6.30/005-openrb.patch
@@ -1,11 +1,11 @@
 --- /dev/null
-+++ b/arch/powerpc/boot/cuboot-magicboxv2.c
-@@ -0,0 +1,70 @@
++++ b/arch/powerpc/boot/cuboot-openrb.c
+@@ -0,0 +1,71 @@
 +/*
-+ * Old U-boot compatibility for Magicbox v2
++ * Old U-boot compatibility for OpenRB boards
 + *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ *         Gabor Juhos <juhosg@openwrt.org>
++ * Author: Gabor Juhos <juhosg@openwrt.org>
++ *         Imre Kaloz <kaloz@openwrt.org>
 + *
 + * This program is free software; you can redistribute it and/or modify it
 + * under the terms of the GNU General Public License version 2 as published
@@ -29,8 +29,8 @@
 +static void fixup_cf_card(void)
 +{
 +#define DCRN_CPC0_PCI_BASE	0xf9
-+#define CF_CS0_BASE	0xff100000
-+#define CF_CS1_BASE	0xff200000
++#define CF_CS0_BASE		0xff100000
++#define CF_CS1_BASE		0xff200000
 +
 +	/* Turn on PerWE instead of PCIsomething */
 +	mtdcr(DCRN_CPC0_PCI_BASE,
@@ -53,11 +53,13 @@
 +#undef CF_CS1_BASE
 +}
 +
-+static void magicboxv2_fixups(void)
++static void openrb_fixups(void)
 +{
-+	fixup_cf_card();
-+	ibm405ep_fixup_clocks(25000000);
++	ibm405ep_fixup_clocks(bd.bi_procfreq / 8);
 +	ibm4xx_sdram_fixup_memsize();
++
++	fixup_cf_card();
++
 +	dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
 +}
 +
@@ -65,20 +67,19 @@
 +		unsigned long r6, unsigned long r7)
 +{
 +	CUBOOT_INIT();
-+	platform_ops.fixups = magicboxv2_fixups;
++	platform_ops.fixups = openrb_fixups;
 +	platform_ops.exit = ibm40x_dbcr_reset;
 +	fdt_init(_dtb_start);
 +	serial_console_init();
 +}
-+
 --- /dev/null
-+++ b/arch/powerpc/boot/dts/magicboxv2.dts
-@@ -0,0 +1,281 @@
++++ b/arch/powerpc/boot/dts/openrb.dts
+@@ -0,0 +1,276 @@
 +/*
-+ * Device Tree Source for Magicbox v2
++ * Device Tree Source for OpenRB boards
 + *
-+ * Copyright 2008 Imre Kaloz <kaloz@openwrt.org>
 + * Copyright 2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright 2009 Imre Kaloz <kaloz@openwrt.org>
 + *
 + * Based on walnut.dts
 + *
@@ -92,8 +93,8 @@
 +/ {
 +	#address-cells = <1>;
 +	#size-cells = <1>;
-+	model = "magicboxv2";
-+	compatible = "magicboxv2";
++	model = "openrb";
++	compatible = "openrb";
 +	dcr-parent = <&{/cpus/cpu@0}>;
 +
 +	aliases {
@@ -111,12 +112,12 @@
 +			device_type = "cpu";
 +			model = "PowerPC,405EP";
 +			reg = <0x00000000>;
-+			clock-frequency = <0xbebc200>; /* Filled in by zImage */
++			clock-frequency = <0>; /* Filled in by zImage */
 +			timebase-frequency = <0>; /* Filled in by zImage */
-+			i-cache-line-size = <20>;
-+			d-cache-line-size = <20>;
-+			i-cache-size = <4000>;
-+			d-cache-size = <4000>;
++			i-cache-line-size = <0x20>;
++			d-cache-line-size = <0x20>;
++			i-cache-size = <0x4000>;
++			d-cache-size = <0x4000>;
 +			dcr-controller;
 +			dcr-access-method = "native";
 +		};
@@ -201,11 +202,6 @@
 +				interrupt-parent = <&UIC0>;
 +				interrupts = <0x2 0x4>;
 +
-+				dtt@48 {
-+					compatible = "national,lm75";
-+					reg = <0x48>;
-+				};
-+
 +				eeprom@50 {
 +					compatible = "at24,24c16";
 +					reg = <0x50>;
@@ -265,7 +261,7 @@
 +			leds {
 +				compatible = "gpio-leds";
 +				user {
-+					label = "magicbox:red:user";
++					label = "openrb:green:user";
 +					gpios = <&GPIO0 2 1>;
 +				};
 +			};
@@ -290,10 +286,10 @@
 +				interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >;
 +			};
 +
-+			nor_flash@ffc00000 {
++			nor_flash@ff800000 {
 +				compatible = "cfi-flash";
 +				bank-width = <2>;
-+				reg = <0x00000000 0xffc00000 0x00400000>;
++				reg = <0x00000000 0xff800000 0x00800000>;
 +				#address-cells = <1>;
 +				#size-cells = <1>;
 +				partition@0 {
@@ -302,11 +298,11 @@
 +				};
 +				partition@120000 {
 +					label = "rootfs";
-+					reg = <0x120000 0x2a0000>;
++					reg = <0x120000 0x6a0000>;
 +				};
-+				partition@3c0000 {
++				partition@7c0000 {
 +					label = "u-boot";
-+					reg = <0x3c0000 0x30000>;
++					reg = <0x7c0000 0x30000>;
 +					read-only;
 +				};
 +			};
@@ -361,46 +357,48 @@
  		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
  		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
  		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
--		cuboot-acadia.c cuboot-amigaone.c cuboot-magicboxv1.c
-+		cuboot-acadia.c cuboot-amigaone.c cuboot-magicboxv1.c \
-+		cuboot-magicboxv2.c
+-		cuboot-acadia.c cuboot-amigaone.c cuboot-magicbox.c
++		cuboot-acadia.c cuboot-amigaone.c cuboot-magicbox.c \
++		cuboot-openrb.c
  src-boot := $(src-wlib) $(src-plat) empty.c
  
  src-boot := $(addprefix $(obj)/, $(src-boot))
 @@ -193,6 +194,7 @@ image-$(CONFIG_EP405)			+= dtbImage.ep40
  image-$(CONFIG_WALNUT)			+= treeImage.walnut
  image-$(CONFIG_ACADIA)			+= cuImage.acadia
- image-$(CONFIG_MAGICBOXV1)		+= cuImage.magicboxv1
-+image-$(CONFIG_MAGICBOXV2)		+= cuImage.magicboxv2
+ image-$(CONFIG_MAGICBOX)		+= cuImage.magicbox
++image-$(CONFIG_OPENRB)			+= cuImage.openrb
  
  # Board ports in arch/powerpc/platform/44x/Kconfig
  image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
 --- a/arch/powerpc/platforms/40x/Kconfig
 +++ b/arch/powerpc/platforms/40x/Kconfig
-@@ -59,6 +59,16 @@ config MAGICBOXV1
+@@ -59,6 +59,16 @@ config MAGICBOX
  	help
- 	  This option enables support for the Magicbox v1 board.
+ 	  This option enables support for the Magicbox boards.
  
-+config MAGICBOXV2
-+	bool "Magicbox v2"
++config OPENRB
++	bool "OpenRB"
 +	depends on 40x
 +	default n
 +	select PPC40x_SIMPLE
 +	select 405EP
 +	select PCI
 +	help
-+	  This option enables support for the Magicbox v2 board.
++	  This option enables support for the OpenRB Light board.
 +
  config MAKALU
  	bool "Makalu"
  	depends on 40x
 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c
 +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
-@@ -53,6 +53,7 @@ machine_device_initcall(ppc40x_simple, p
+@@ -52,7 +52,8 @@ machine_device_initcall(ppc40x_simple, p
+  */
  static char *board[] __initdata = {
  	"amcc,acadia",
- 	"magicboxv1",
-+	"magicboxv2",
+-	"magicbox"
++	"magicbox",
++	"openrb"
  };
  
  static int __init ppc40x_probe(void)
diff --git a/target/linux/ppc40x/patches-2.6.30/007-openrb-light.patch b/target/linux/ppc40x/patches-2.6.30/007-openrb-light.patch
deleted file mode 100644
index 9048da5..0000000
--- a/target/linux/ppc40x/patches-2.6.30/007-openrb-light.patch
+++ /dev/null
@@ -1,375 +0,0 @@
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -76,7 +76,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
- 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
- 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
- 		cuboot-acadia.c cuboot-amigaone.c cuboot-magicboxv1.c \
--		cuboot-magicboxv2.c
-+		cuboot-magicboxv2.c cuboot-openrb-light.c
- src-boot := $(src-wlib) $(src-plat) empty.c
- 
- src-boot := $(addprefix $(obj)/, $(src-boot))
-@@ -195,6 +195,7 @@ image-$(CONFIG_WALNUT)			+= treeImage.wa
- image-$(CONFIG_ACADIA)			+= cuImage.acadia
- image-$(CONFIG_MAGICBOXV1)		+= cuImage.magicboxv1
- image-$(CONFIG_MAGICBOXV2)		+= cuImage.magicboxv2
-+image-$(CONFIG_OPENRB_LIGHT)		+= cuImage.openrb-light
- 
- # Board ports in arch/powerpc/platform/44x/Kconfig
- image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
---- a/arch/powerpc/platforms/40x/Kconfig
-+++ b/arch/powerpc/platforms/40x/Kconfig
-@@ -79,6 +79,16 @@ config MAKALU
- 	help
- 	  This option enables support for the AMCC PPC405EX board.
- 
-+config OPENRB_LIGHT
-+	bool "OpenRB Light"
-+	depends on 40x
-+	default n
-+	select PPC40x_SIMPLE
-+	select 405EP
-+	select PCI
-+	help
-+	  This option enables support for the OpenRB Light board.
-+
- #config REDWOOD_5
- #	bool "Redwood-5"
- #	depends on 40x
---- a/arch/powerpc/platforms/40x/ppc40x_simple.c
-+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
-@@ -54,6 +54,7 @@ static char *board[] __initdata = {
- 	"amcc,acadia",
- 	"magicboxv1",
- 	"magicboxv2",
-+	"openrb,light",
- };
- 
- static int __init ppc40x_probe(void)
---- /dev/null
-+++ b/arch/powerpc/boot/cuboot-openrb-light.c
-@@ -0,0 +1,69 @@
-+/*
-+ * Old U-boot compatibility for OpenRB Light board
-+ *
-+ * Author: Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "io.h"
-+#include "dcr.h"
-+#include "stdio.h"
-+#include "4xx.h"
-+#include "44x.h"
-+#include "cuboot.h"
-+
-+#define TARGET_4xx
-+#define TARGET_405EP
-+#include "ppcboot.h"
-+
-+static bd_t bd;
-+
-+static void fixup_cf_card(void)
-+{
-+#define DCRN_CPC0_PCI_BASE	0xf9
-+#define CF_CS0_BASE		0xff100000
-+#define CF_CS1_BASE		0xff200000
-+
-+	/* Turn on PerWE instead of PCIsomething */
-+	mtdcr(DCRN_CPC0_PCI_BASE,
-+	      mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27));
-+
-+	/* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */
-+	mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR);
-+	mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
-+	mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP);
-+	mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
-+
-+	/* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */
-+	mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR);
-+	mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
-+	mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP);
-+	mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
-+
-+#undef DCRN_CPC0_PCI_BASE
-+#undef CF_CS0_BASE
-+#undef CF_CS1_BASE
-+}
-+
-+static void openrb_light_fixups(void)
-+{
-+	fixup_cf_card();
-+	ibm405ep_fixup_clocks(33333000);
-+	ibm4xx_sdram_fixup_memsize();
-+	dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+		unsigned long r6, unsigned long r7)
-+{
-+	CUBOOT_INIT();
-+	platform_ops.fixups = openrb_light_fixups;
-+	platform_ops.exit = ibm40x_dbcr_reset;
-+	fdt_init(_dtb_start);
-+	serial_console_init();
-+}
-+
---- /dev/null
-+++ b/arch/powerpc/boot/dts/openrb-light.dts
-@@ -0,0 +1,252 @@
-+/*
-+ * Device Tree Source for OpenRB Light board
-+ *
-+ * Copyright 2009 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Based on magicboxv2.dts
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without
-+ * any warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+/ {
-+	#address-cells = <1>;
-+	#size-cells = <1>;
-+	model = "openrb,light";
-+	compatible = "openrb,light";
-+	dcr-parent = <&{/cpus/cpu@0}>;
-+
-+	aliases {
-+		ethernet0 = &EMAC0;
-+		serial0 = &UART0;
-+		serial1 = &UART1;
-+	};
-+
-+	cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		cpu@0 {
-+			device_type = "cpu";
-+			model = "PowerPC,405EP";
-+			reg = <0x00000000>;
-+			clock-frequency = <0xbebc200>; /* Filled in by zImage */
-+			timebase-frequency = <0>; /* Filled in by zImage */
-+			i-cache-line-size = <20>;
-+			d-cache-line-size = <20>;
-+			i-cache-size = <4000>;
-+			d-cache-size = <4000>;
-+			dcr-controller;
-+			dcr-access-method = "native";
-+		};
-+	};
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
-+	};
-+
-+	UIC0: interrupt-controller {
-+		compatible = "ibm,uic";
-+		interrupt-controller;
-+		cell-index = <0>;
-+		dcr-reg = <0x0c0 0x009>;
-+		#address-cells = <0>;
-+		#size-cells = <0>;
-+		#interrupt-cells = <2>;
-+	};
-+
-+	plb {
-+		compatible = "ibm,plb3";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges;
-+		clock-frequency = <0>; /* Filled in by zImage */
-+
-+		SDRAM0: memory-controller {
-+			compatible = "ibm,sdram-405ep";
-+			dcr-reg = <0x010 0x002>;
-+		};
-+
-+		MAL: mcmal {
-+			compatible = "ibm,mcmal-405ep", "ibm,mcmal";
-+			dcr-reg = <0x180 0x062>;
-+			num-tx-chans = <4>;
-+			num-rx-chans = <2>;
-+			interrupt-parent = <&UIC0>;
-+			interrupts = <
-+				0xb 0x4 /* TXEOB */
-+				0xc 0x4 /* RXEOB */
-+				0xa 0x4 /* SERR */
-+				0xd 0x4 /* TXDE */
-+				0xe 0x4 /* RXDE */>;
-+		};
-+
-+		OPB0: opb {
-+			compatible = "ibm,opb-405ep", "ibm,opb";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0xef600000 0xef600000 0x00a00000>;
-+			dcr-reg = <0x0a0 0x005>;
-+			clock-frequency = <0>; /* Filled in by zImage */
-+
-+			UART0: serial@ef600300 {
-+				device_type = "serial";
-+				compatible = "ns16550";
-+				reg = <0xef600300 0x00000008>;
-+				virtual-reg = <0xef600300>;
-+				clock-frequency = <0>; /* Filled in by zImage */
-+				current-speed = <115200>;
-+				interrupt-parent = <&UIC0>;
-+				interrupts = <0x0 0x4>;
-+			};
-+
-+			UART1: serial@ef600400 {
-+				device_type = "serial";
-+				compatible = "ns16550";
-+				reg = <0xef600400 0x00000008>;
-+				virtual-reg = <0xef600400>;
-+				clock-frequency = <0>; /* Filled in by zImage */
-+				current-speed = <115200>;
-+				interrupt-parent = <&UIC0>;
-+				interrupts = <0x1 0x4>;
-+			};
-+
-+			IIC: i2c@ef600500 {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				compatible = "ibm,iic-405ep", "ibm,iic";
-+				reg = <0xef600500 0x00000011>;
-+				interrupt-parent = <&UIC0>;
-+				interrupts = <0x2 0x4>;
-+
-+				eeprom@50 {
-+					compatible = "at24,24c16";
-+					reg = <0x50>;
-+				};
-+			};
-+
-+			GPIO0: gpio-controller@ef600700 {
-+				compatible = "ibm,ppc4xx-gpio";
-+				reg = <0xef600700 0x00000020>;
-+				#gpio-cells = <2>;
-+				gpio-controller;
-+			};
-+
-+			EMAC0: ethernet@ef600800 {
-+				linux,network-index = <0x0>;
-+				device_type = "network";
-+				compatible = "ibm,emac-405ep", "ibm,emac";
-+				interrupt-parent = <&UIC0>;
-+				interrupts = <
-+					0xf 0x4 /* Ethernet */
-+					0x9 0x4 /* Ethernet Wake Up */>;
-+				local-mac-address = [000000000000]; /* Filled in by zImage */
-+				reg = <0xef600800 0x00000070>;
-+				mal-device = <&MAL>;
-+				mal-tx-channel = <0>;
-+				mal-rx-channel = <0>;
-+				cell-index = <0>;
-+				max-frame-size = <0x5dc>;
-+				rx-fifo-size = <0x1000>;
-+				tx-fifo-size = <0x800>;
-+				phy-mode = "mii";
-+				phy-map = <0x00000000>;
-+			};
-+
-+			leds {
-+				compatible = "gpio-leds";
-+				user {
-+					label = "openrb:green:user";
-+					gpios = <&GPIO0 2 1>;
-+				};
-+			};
-+		};
-+
-+		EBC0: ebc {
-+			compatible = "ibm,ebc-405ep", "ibm,ebc";
-+			dcr-reg = <0x012 0x002>;
-+			#address-cells = <2>;
-+			#size-cells = <1>;
-+			/* The ranges property is supplied by the bootwrapper
-+			 * and is based on the firmware's configuration of the
-+			 * EBC bridge
-+			 */
-+			clock-frequency = <0>; /* Filled in by zImage */
-+
-+			cf_card@ff100000 {
-+				compatible = "magicbox-cf", "pata-magicbox-cf";
-+				reg = <0x00000000 0xff100000 0x00001000
-+				       0x00000000 0xff200000 0x00001000>;
-+				interrupt-parent = <&UIC0>;
-+				interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >;
-+			};
-+
-+			nor_flash@ff800000 {
-+				compatible = "cfi-flash";
-+				bank-width = <2>;
-+				reg = <0x00000000 0xff800000 0x00800000>;
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				partition@0 {
-+					label = "linux";
-+					reg = <0x0 0x120000>;
-+				};
-+				partition@120000 {
-+					label = "rootfs";
-+					reg = <0x120000 0x6a0000>;
-+				};
-+				partition@7c0000 {
-+					label = "u-boot";
-+					reg = <0x7c0000 0x30000>;
-+					read-only;
-+				};
-+			};
-+		};
-+
-+		PCI0: pci@ec000000 {
-+			device_type = "pci";
-+			#interrupt-cells = <1>;
-+			#size-cells = <2>;
-+			#address-cells = <3>;
-+			compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
-+			primary;
-+			reg = <0xeec00000 0x00000008    /* Config space access */
-+			       0xeed80000 0x00000004    /* IACK */
-+			       0xeed80000 0x00000004    /* Special cycle */
-+			       0xef480000 0x00000040>;  /* Internal registers */
-+
-+			/* Outbound ranges, one memory and one IO,
-+			 * later cannot be changed. Chip supports a second
-+			 * IO range but we don't use it for now
-+			 */
-+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
-+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
-+
-+			/* Inbound 2GB range starting at 0 */
-+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-+
-+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
-+			interrupt-map = <
-+				/* IDSEL 1 */
-+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
-+
-+				/* IDSEL 2 */
-+				0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
-+
-+				/* IDSEL 3 */
-+				0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
-+
-+				/* IDSEL 4 */
-+				0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
-+			>;
-+		};
-+	};
-+
-+	chosen {
-+		linux,stdout-path = "/plb/opb/serial@ef600300";
-+	};
-+};
diff --git a/target/linux/ppc40x/patches-2.6.30/100-magicbox-ide-driver.patch b/target/linux/ppc40x/patches-2.6.30/100-magicbox-ide-driver.patch
index ebd9b33..d6907f9 100644
--- a/target/linux/ppc40x/patches-2.6.30/100-magicbox-ide-driver.patch
+++ b/target/linux/ppc40x/patches-2.6.30/100-magicbox-ide-driver.patch
@@ -6,7 +6,7 @@
  
 +config BLK_DEV_IDE_MAGICBOX
 +	tristate "Magicbox CF card support"
-+	depends on MAGICBOXV2 || OPENRB_LIGHT
++	depends on MAGICBOX || OPENRB_LIGHT
 +	select IDE_XFER_MODE
 +
  config BLK_DEV_IDE_TX4938
diff --git a/target/linux/ppc40x/patches-2.6.30/101-pata-magicbox-cf-driver.patch b/target/linux/ppc40x/patches-2.6.30/101-pata-magicbox-cf-driver.patch
index 84794d9..f738f89 100644
--- a/target/linux/ppc40x/patches-2.6.30/101-pata-magicbox-cf-driver.patch
+++ b/target/linux/ppc40x/patches-2.6.30/101-pata-magicbox-cf-driver.patch
@@ -6,7 +6,7 @@
  
 +config PATA_MAGICBOX_CF
 +	tristate "Magicbox/OpenRB Compact Flash support"
-+	depends on MAGICBOXV2 || OPENRB_LIGHT
++	depends on MAGICBOX || OPENRB
 +	help
 +	  This option enables support for a Compact Flash conected on
 +	  the ppc405ep expansion bus. This driver had been written for