ramips: add helper variable for boardname

Add a helper variable which contains the boardname separated from the
vendor name. It allows to switch to a device tree compatible string
based boardname, by keeping the $board:colour:function syntax in
scripts handling/adding config for LEDs.

Boards not using the device tree compatible string as based boardname
are unaffected by the change, since none of them uses a comma in the
boardname.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 46 insertions, 45 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index e649c7e..570fba2 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -6,12 +6,13 @@
 
 get_status_led() {
 	board=$(board_name)
+	boardname="${board##*,}"
 
 	case $board in
 	3g150b|\
 	3g300m|\
 	w150m)
-		status_led="$board:blue:ap"
+		status_led="$boardname:blue:ap"
 		;;
 	3g-6200n|\
 	ar670w|\
@@ -46,10 +47,10 @@ get_status_led() {
 	x8|\
 	xdxrn502j|\
 	wn3000rpv3)
-		status_led="$board:green:power"
+		status_led="$boardname:green:power"
 		;;
 	3g-6200nl)
-		status_led="$board:green:internet"
+		status_led="$boardname:green:internet"
 		;;
 	a5-v11|\
 	cs-qr10|\
@@ -60,11 +61,11 @@ get_status_led() {
 	mpr-a1|\
 	mpr-a2|\
 	mzk-ex750np)
-		status_led="$board:red:power"
+		status_led="$boardname:red:power"
 		;;
 	ai-br100|\
 	ht-tm02)
-		status_led="$board:blue:wlan"
+		status_led="$boardname:blue:wlan"
 		;;
 	all0239-3g|\
 	dcs-930|\
@@ -88,7 +89,7 @@ get_status_led() {
 	v11st-fe|\
 	wmr-300|\
 	zbt-wg2626)
-		status_led="$board:green:status"
+		status_led="$boardname:green:status"
 		;;
 	asl26555-8M|\
 	asl26555-16M)
@@ -97,28 +98,28 @@ get_status_led() {
 	atp-52b|\
 	ew1200|\
 	ip2202)
-		status_led="$board:green:run"
+		status_led="$boardname:green:run"
 		;;
 	awapn2403|\
 	dir-645|\
 	sk-wb8|\
 	wrh-300cr)
-		status_led="$board:green:wps"
+		status_led="$boardname:green:wps"
 		;;
 	c108)
-		status_led="$board:green:lan"
+		status_led="$boardname:green:lan"
 		;;
 	cf-wr800n|\
 	psg1208)
-		status_led="$board:white:wps"
+		status_led="$boardname:white:wps"
 		;;
 	psg1218a|\
 	psg1218b)
-		status_led="$board:yellow:status"
+		status_led="$boardname:yellow:status"
 		;;
 	cy-swr1100|\
 	w502u)
-		status_led="$board:blue:wps"
+		status_led="$boardname:blue:wps"
 		;;
 	c20|\
 	d240|\
@@ -137,22 +138,22 @@ get_status_led() {
 	y1|\
 	y1s|\
 	youku-yk1)
-		status_led="$board:blue:power"
+		status_led="$boardname:blue:power"
 		;;
 	db-wrt01|\
 	esr-9753|\
 	pbr-d1)
-		status_led="$board:orange:power"
+		status_led="$boardname:orange:power"
 		;;
 	f5d8235-v1)
-		status_led="$board:blue:wired"
+		status_led="$boardname:blue:wired"
 		;;
 	f5d8235-v2)
-		status_led="$board:blue:router"
+		status_led="$boardname:blue:router"
 		;;
 	f7c027|\
 	timecloud)
-		status_led="$board:orange:status"
+		status_led="$boardname:orange:status"
 		;;
 	hc5*61|\
 	hc5661a|\
@@ -160,58 +161,58 @@ get_status_led() {
 	jhr-n926r|\
 	mlw221|\
 	mlwg2)
-		status_led="$board:blue:system"
+		status_led="$boardname:blue:system"
 		;;
 	hc5962)
-		status_led="$board:white:status"
+		status_led="$boardname:white:status"
 		;;
 	k2p|\
 	m3|\
 	miwifi-nano)
-		status_led="$board:blue:status"
+		status_led="$boardname:blue:status"
 		;;
 	linkits7688)
 		[ "$1" = "upgrade" ] && status_led="mediatek:orange:wifi"
 		;;
 	m2m)
-		status_led="$board:blue:wifi"
+		status_led="$boardname:blue:wifi"
 		;;
 	gl-mt300n-v2)
-		status_led="$board:red:wlan"
+		status_led="$boardname:red:wlan"
 		;;
 	m4-4M|\
 	m4-8M)
 		status_led="m4:blue:status"
 		;;
 	mir3g)
-		status_led="$board:yellow:status"
+		status_led="$boardname:yellow:status"
 		;;
 	miwifi-mini|\
 	zte-q7)
-		status_led="$board:red:status"
+		status_led="$boardname:red:status"
 		;;
 	mr-102n)
-		status_led="$board:amber:status"
+		status_led="$boardname:amber:status"
 		;;
 	mr200)
-		status_led="$board:white:power"
+		status_led="$boardname:white:power"
 		;;
 	nw718)
-		status_led="$board:amber:cpu"
+		status_led="$boardname:amber:cpu"
 		;;
 	newifi-d1)
-		status_led="$board:blue:status"
+		status_led="$boardname:blue:status"
 		;;
 	omega2| \
 	omega2p)
-		status_led="$board:amber:system"
+		status_led="$boardname:amber:system"
 		;;
 	oy-0001|\
 	sl-r7205)
-		status_led="$board:green:wifi"
+		status_led="$boardname:green:wifi"
 		;;
 	psr-680w)
-		status_led="$board:red:wan"
+		status_led="$boardname:red:wan"
 		;;
 	px-4885-4M|\
 	px-4885-8M)
@@ -221,7 +222,7 @@ get_status_led() {
 	whr-1166d|\
 	whr-600d|\
 	widora-neo)
-		status_led="$board:orange:wifi"
+		status_led="$boardname:orange:wifi"
 		;;
 	mzk-ex300np|\
 	rt-n10-plus|\
@@ -231,13 +232,13 @@ get_status_led() {
 	ur-326n4g|\
 	ur-336un|\
 	wf-2881)
-		status_led="$board:green:wps"
+		status_led="$boardname:green:wps"
 		;;
 	rb750gr3)
-		status_led="$board:blue:pwr"
+		status_led="$boardname:blue:pwr"
 		;;
 	sap-g3200u3)
-		status_led="$board:green:usb"
+		status_led="$boardname:green:usb"
 		;;
 	u25awf-h1)
 		status_led="u25awf:red:wifi"
@@ -249,43 +250,43 @@ get_status_led() {
 		status_led="u7628-01:green:power"
 		;;
 	v22rw-2x2)
-		status_led="$board:green:security"
+		status_led="$boardname:green:security"
 		;;
 	vocore-8M|\
 	vocore-16M)
 		status_led="vocore:green:status"
 		;;
 	vocore2)
-		status_led="$board:fuchsia:status"
+		status_led="$boardname:fuchsia:status"
 		;;
 	vocore2lite)
-		status_led="$board:green:status"
+		status_led="$boardname:green:status"
 		;;
 	w306r-v20|\
 	witi|\
 	zbt-wr8305rt)
-		status_led="$board:green:sys"
+		status_led="$boardname:green:sys"
 		;;
 	wcr-1166ds|\
 	whr-300hp2|\
 	wsr-1166|\
 	wsr-600)
-		status_led="$board:green:power"
+		status_led="$boardname:green:power"
 		;;
 	wcr-150gn|\
 	wl-351)
-		status_led="$board:amber:power"
+		status_led="$boardname:amber:power"
 		;;
 	whr-g300n|\
 	wlr-6000|\
 	zbt-we2026)
-		status_led="$board:red:power"
+		status_led="$boardname:red:power"
 		;;
 	wzr-agl300nh)
-		status_led="$board:green:router"
+		status_led="$boardname:green:router"
 		;;
 	wizfi630a)
-		status_led="$board::run"
+		status_led="$boardname::run"
 		;;
 	wr512-3gn-4M|\
 	wr512-3gn-8M)
@@ -301,7 +302,7 @@ get_status_led() {
 		status_led="wt3020:blue:power"
 		;;
 	zbt-cpe102)
-		status_led="$board:green:4g-0"
+		status_led="$boardname:green:4g-0"
 		;;
 	zbt-we826-16M|\
 	zbt-we826-32M)