summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2014-06-02 12:42:52 +0000
committerJohn Crispin <john@openwrt.org>2014-06-02 12:42:52 +0000
commit813a7c3827afe71f49f2985c607585900a7db4fb (patch)
treebf7b310aad63e81c8676b0615f3a3adf01447a9b /target/linux/ramips/base-files/etc
parentefd09832febde11e9d4bc6fca6e471f94933867f (diff)
downloadmtk-20170518-813a7c3827afe71f49f2985c607585900a7db4fb.zip
mtk-20170518-813a7c3827afe71f49f2985c607585900a7db4fb.tar.gz
mtk-20170518-813a7c3827afe71f49f2985c607585900a7db4fb.tar.bz2
ralink: Add support for samsung cy-swr1100 wireless router
It is base on rt3662 soc with dual band 802.11n wireless router. Use rtl8367R switch chip. This patch adds a profile for this board. It use seama image header. so i also enable it on kernel config. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 40908
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh3
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/01_leds4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/02_network8
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header1
5 files changed, 20 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 66a0aaa..f9b4168 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -27,6 +27,9 @@ get_status_led() {
br6425 | br-6475nd)
status_led="edimax:green:power"
;;
+ cy-swr1100)
+ status_led="samsung:blue:wps"
+ ;;
d105)
status_led="d105:red:power"
;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 1a39bb6..b57bfd8 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -70,6 +70,7 @@ case "$FIRMWARE" in
broadway | \
br6524n | \
carambola | \
+ cy-swr1100 | \
d105 | \
dcs-930 | \
dir-300-b7 | \
@@ -136,6 +137,9 @@ case "$FIRMWARE" in
"rt2x00pci_1_0.eeprom")
case $board in
+ cy-swr1100)
+ rt2x00_eeprom_extract "factory" 8192 512
+ ;;
rt-n56u | whr-600d)
rt2x00_eeprom_extract "factory" 32768 512
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index 74ba0ba..23c2451 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -60,6 +60,10 @@ case $board in
br6524n)
set_wifi_led "edimax:blue:wlan"
;;
+ cy-swr1100)
+ ucidef_set_led_default "wps" "WPS" "samsung:blue:wps" "0"
+ set_usb_led "samsung:blue:usb"
+ ;;
d105)
ucidef_set_led_default "power" "POWER" "d105:red:power" "1"
set_usb_led "d105:green:usb"
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index b66d176..b9524f6 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -78,6 +78,13 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
;;
+ cy-swr1100)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 9t"
+ ucidef_add_switch_vlan "switch0" "2" "4 9t"
+ ;;
+
dir-610-a1 | \
dir-300-b7 | \
dir-320-b1 | \
@@ -205,6 +212,7 @@ ramips_setup_macs()
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
+ cy-swr1100 | \
dir-645)
lan_mac=$(mtd_get_mac_ascii nvram lanmac)
wan_mac=$(mtd_get_mac_ascii nvram wanmac)
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header b/target/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header
index d8bed79..a6c392c 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header
+++ b/target/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header
@@ -14,6 +14,7 @@ fix_seama_header() {
board=$(ramips_board_name)
case "$board" in
+cy-swr1100 | \
dir-645)
fix_seama_header kernel
;;