diff options
| author | Maxim Anisimov <maxim.anisimov.ua@gmail.com> | 2018-05-30 18:41:53 +0300 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-06-16 10:16:38 +0200 |
| commit | 5881e2434fce53724c5d09b365945429a4985c41 (patch) | |
| tree | 05a54878b5459b89e58be2af0734ba759724dc5a /target/linux/ramips/base-files/etc | |
| parent | be799e8c2a1b56c39743b90242d36a1396bb79f7 (diff) | |
| download | mtk-20170518-5881e2434fce53724c5d09b365945429a4985c41.zip mtk-20170518-5881e2434fce53724c5d09b365945429a4985c41.tar.gz mtk-20170518-5881e2434fce53724c5d09b365945429a4985c41.tar.bz2 | |
ramips: add support for TP-Link TL-WR842N v5
TP-Link TL-WR842N v5 are simple N300 router with 5-port FE switch and
non-detachable antennas. Its very similar to TP-Link TL-MR3420 V5.
Specification:
- MT7628N/N (580 MHz)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- USB 2.0 Port
- UART (J1) header on PCB (115200 8n1)
- 7x LED, 2x button, power input switch
Flash instruction:
The only way to flash OpenWrt image in wr842nv5 is to use
tftp recovery mode in U-Boot:
1. Configure PC with static IP 192.168.0.225/24 and tftp server.
2. Rename "lede-ramips-mt7628-tplink_tl-wr842n-v5-squashfs-tftp-recovery.bin"
to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with one of LAN ports, press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 1 |
3 files changed, 4 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 73e3f22..1318ab3 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -413,7 +413,8 @@ tplink,c50-v3) ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt" ;; -tplink,tl-mr3420-v5) +tplink,tl-mr3420-v5|\ +tplink,tl-wr842n-v5) set_usb_led "$boardname:green:usb" ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index dfd6c26d..de98c1e 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -204,6 +204,7 @@ ramips_setup_interfaces() tplink,c20-v4|\ tplink,c50-v3|\ tplink,tl-mr3420-v5|\ + tplink,tl-wr842n-v5|\ tl-wr840n-v4|\ tl-wr840n-v5|\ tl-wr841n-v13|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index b411835..7f8e471 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -41,6 +41,7 @@ get_status_led() { tplink,c20-v4|\ tplink,c50-v3|\ tplink,tl-mr3420-v5|\ + tplink,tl-wr842n-v5|\ tplink,tl-wr902ac-v3|\ tl-wr840n-v4|\ tl-wr840n-v5|\ |