diff options
| author | Zoltan HERPAI <wigyori@uid0.hu> | 2017-12-06 15:43:55 +0100 |
|---|---|---|
| committer | Daniel Golle <daniel@makrotopia.org> | 2017-12-06 17:51:31 +0100 |
| commit | 58e0673900ea585b03d3cc2f8917667faa3f977f (patch) | |
| tree | 5e0fb4d6f1638b921cf39ed75538869d6576314b /target/linux/ramips/base-files/etc | |
| parent | 347d18177e30cd38e26d889471696c105772d828 (diff) | |
| download | mtk-20170518-58e0673900ea585b03d3cc2f8917667faa3f977f.zip mtk-20170518-58e0673900ea585b03d3cc2f8917667faa3f977f.tar.gz mtk-20170518-58e0673900ea585b03d3cc2f8917667faa3f977f.tar.bz2 | |
ramips: add support for Asus RT-N11P / RT-N12+ / RT-N12E b1
This is a variant of the MT7620N-based Asus routers.
Specifications:
- MT7620N (580 MHz)
- 32 MB RAM
- 8 MB Flash
- 5x 10/100Mbps Ethernet (built-in switch)
- 2.4 GHz WLAN
- 2x external, non-detachable antennas
- UART (J2) header on PCB (115200 8n1)
Flash instructions:
1. Configure PC with static IP 192.168.1.75/24
2. Connect PC with one of LAN ports, press the reset button, power up
the router and keep button pressed for around 6-7 seconds. All 4 LEDs will
start to blink, which is when the router will accept firmware files via TFTP.
No known limitations on firmware filenames, just send it with a TFTP client
to 192.168.1.1.
3. Router will download file from server, write it to flash and reboot.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 6 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 |
2 files changed, 7 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 74e405e..0c97dc9 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -340,6 +340,12 @@ rt-ac51u) set_wifi_led "$board:blue:wifi" set_usb_led "$board:blue:usb" "1-1" ;; +rt-n12p) + ucidef_set_led_default "power" "power" "$board:green:power" "1" + ucidef_set_led_netdev "lan" "lan" "$board:green:lan" eth0.1 + ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2 + set_wifi_led "$board:green:air" + ;; rt-n14u) ucidef_set_led_default "power" "power" "$board:blue:power" "1" ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" eth0.1 diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 6ad64e6..db797c6 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -100,6 +100,7 @@ ramips_setup_interfaces() psg1208|\ psg1218a|\ r6220|\ + rt-n12p) sap-g3200u3|\ sk-wb8|\ u7621-06-256M-16M|\ |