summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorJackson Ming Hu <huming2207@gmail.com>2017-12-15 11:51:33 +0800
committerMathias Kresin <dev@kresin.me>2017-12-21 01:05:16 +0100
commitc0e131b4363dde16a1071131b7e762e36099f780 (patch)
tree180ee78c232b121b8d461ed6f131f71d6d83b19e /target/linux/ramips/base-files/etc
parentfe6f298b07941758a759354c6751188c825c5ffb (diff)
downloadmtk-20170518-c0e131b4363dde16a1071131b7e762e36099f780.zip
mtk-20170518-c0e131b4363dde16a1071131b7e762e36099f780.tar.gz
mtk-20170518-c0e131b4363dde16a1071131b7e762e36099f780.tar.bz2
ramips: add support for newifi d2
Previously Newifi D2 could only use PandoraBox M1's firmware. It works fine, but LED GPIO is different. As a result, a separated DTS file for this device should be implemented. Hardware spec: * CPU: MTK MT7621A * RAM: 512MB * ROM: 32MB SPI Flash * WiFi: MTK MT7603+MT7612 * Button: 2 buttons (reset, wps) * LED: 3 single-color LEDs (USB, WiFi 2.4GHz, WiFi 5GHz) & 2 dual-color LEDs (Power, Internet) * Ethernet: 5 ports, 4 LAN + 1 WAN Installation method: Same as Newifi D1, users may need to request unlock code from the device manufacturer. Otherwise, a SPI flash programmer may be necessary to get the firmware flashed. After the device is unlocked, press and hold reset button before power cable plugs in. Then go to http://192.168.1.1 to upload and flash the firmware package. Signed-off-by: Jackson Ming Hu <huming2207@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds6
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
3 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 671a578..a5c51c7 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -305,6 +305,12 @@ pbr-m1)
ucidef_set_led_default "power" "power" "$boardname:blue:power" "1"
ucidef_set_led_default "sys" "sys" "$boardname:blue:sys" "1"
;;
+d-team,newifi-d2)
+ set_usb_led "$boardname:blue:usb"
+ ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10"
+ ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
+ ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
+ ;;
psg1208)
set_wifi_led "$boardname:white:wlan2g"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 947b0dd..5a64bb7 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -92,6 +92,7 @@ ramips_setup_interfaces()
mt7628|\
mzk-750dhp|\
mzk-w300nh2|\
+ d-team,newifi-d2|\
nixcore-x1-8M|\
nixcore-x1-16M|\
oy-0001|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 1d4b0ef..e7b49a5 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -125,6 +125,7 @@ get_status_led() {
d240|\
dap-1350|\
na930|\
+ d-team,newifi-d2|\
pbr-m1|\
re350-v1|\
rt-ac51u|\