summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2018-06-16 00:27:51 +0900
committerMathias Kresin <dev@kresin.me>2018-06-19 22:46:04 +0200
commitda318f3522344ae3344b94c85dae41eeb53b04cc (patch)
tree37fdb1d50aa02411f7eeb920e9ecf9fbe81c0d94 /target/linux/ramips/base-files/etc
parentafe0320ffc212b405e068281d636626df754261e (diff)
downloadmtk-20170518-da318f3522344ae3344b94c85dae41eeb53b04cc.zip
mtk-20170518-da318f3522344ae3344b94c85dae41eeb53b04cc.tar.gz
mtk-20170518-da318f3522344ae3344b94c85dae41eeb53b04cc.tar.bz2
ramips: add support for ELECOM WRC-1167GHBK2-S
ELECOM WRC-1167GHBK2-S is a 2.4/5 GHz band 11ac router, based on MediaTek MT7621A. Specification: - MT7621A (2-Cores, 4-Threads) - 128 MB of RAM (DDR3) - 16 MB of Flash (SPI) - 2T2R 2.4/5 GHz - MediaTek MT7615D - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 2x keys - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - baudrate: 57600 bps Flash instruction using factory image: 1. Rename the factory image to "wrc-1167ghbk2-s_v0.00.bin" 2. Connect the computer to the LAN port of WRC-1167GHBK2-S 3. Connect power cable to WRC-1167GHBK2-S and turn on it 4. Access to "http://192.168.2.1/details.html" and open firmware update page ("手動更新(アップデート)") 5. Select the factory image and click apply ("適用") button 6. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds1
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network10
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
3 files changed, 8 insertions, 4 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index a9a68f6..54504c6 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -168,6 +168,7 @@ dlink,dwr-921-c1)
ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0"
;;
dir-810l|\
+elecom,wrc-1167ghbk2-s|\
iodata,wn-gx300gr|\
mzk-750dhp|\
mzk-dp150n|\
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 49d7f92..de086cf 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -226,7 +226,8 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
;;
- dir-860l-b1)
+ dir-860l-b1|\
+ elecom,wrc-1167ghbk2-s)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
;;
@@ -450,6 +451,10 @@ ramips_setup_macs()
e1700)
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
;;
+ elecom,wrc-1167ghbk2-s|\
+ sk-wb8)
+ wan_mac=$(mtd_get_mac_binary factory 57350)
+ ;;
gl-mt300n-v2|\
whr-g300n)
wan_mac=$(mtd_get_mac_binary factory 4)
@@ -514,9 +519,6 @@ ramips_setup_macs()
lan_mac=$(macaddr_setbit_la "$lan_mac")
wan_mac=$(mtd_get_mac_binary factory 32772)
;;
- sk-wb8)
- wan_mac=$(mtd_get_mac_binary factory 57350)
- ;;
tew-691gr)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3)
;;
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index e5373a8..eb06442 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -22,6 +22,7 @@ get_status_led() {
dch-m225|\
dir-860l-b1|\
e1700|\
+ elecom,wrc-1167ghbk2-s|\
ex2700|\
ex3700|\
fonera20n|\